adamdunkels
1752b53f74
Refresh routes when a packet is received. Set a conservatively low route timeout (10 seconds).
2009-05-04 11:24:04 +00:00
adamdunkels
c83c5c4c55
Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception)
2009-05-04 11:23:30 +00:00
adamdunkels
f5a57a4e54
Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)
2009-04-30 20:21:06 +00:00
adamdunkels
e70cf0c7c6
Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.
2009-04-29 20:48:57 +00:00
adamdunkels
c489b1118d
New module: packetqueue. The packetqueue module maintains packet queues for other modules.
2009-04-29 20:47:30 +00:00
adamdunkels
cc44e89415
Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote)
2009-04-29 11:42:13 +00:00
adamdunkels
c02a82ac41
Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon
2009-04-29 11:40:33 +00:00
adamdunkels
c9df0ab123
Bugfix in debug message printout
2009-04-28 14:01:46 +00:00
adamdunkels
81ef83b856
Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission.
2009-04-28 14:00:53 +00:00
adamdunkels
fdd05f5c71
Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net
2009-04-28 13:52:04 +00:00
fros4943
7810d362a6
minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer
2009-04-16 14:32:01 +00:00
nvt-se
c0fb680f12
simplified code by using udp_broadcast_new.
2009-04-13 19:55:15 +00:00
nvt-se
9765df97e5
support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner.
2009-04-13 19:54:07 +00:00
adamdunkels
ef4f5cc0e5
Made TCP MSS configurable
2009-04-10 00:37:48 +00:00
nifi
84b38de494
removed bitfields for compatibility with cc65
2009-04-09 21:54:09 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
nvt-se
03cd533712
made LISTEN_TIME and OFF_TIME configurable.
2009-04-07 11:29:08 +00:00
adamdunkels
5e456aea7d
Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting
2009-04-06 22:50:35 +00:00
adamdunkels
ace6567815
Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions
2009-04-06 21:20:35 +00:00
adamdunkels
be1c8ccec9
Added debug printouts
2009-04-06 21:19:34 +00:00
adamdunkels
d02ac74bbc
Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers
2009-04-06 21:19:00 +00:00
nifi
000f740adc
typo
2009-04-06 15:54:07 +00:00
nifi
eab96e9b53
added rime-udp.c
2009-04-06 14:10:57 +00:00
nvt-se
d6869018c7
turned off debugging.
2009-04-06 13:27:37 +00:00
nifi
9f2ff48fda
added 802.15.4 frame packeter
2009-04-06 13:19:03 +00:00
nvt-se
3b2ad9cfc4
added packet forwarding and replaceable routing modules.
2009-04-06 13:18:50 +00:00
nvt-se
461ba4082c
in case UIP_CONF_ROUTING is set, check if we have a registered routing
...
module and use it for looking up the next hop of an address.
2009-04-06 13:18:12 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
d8caaca289
listen time and off time parameters configurable from outside because cc1020 needs longer listen time.
2009-03-26 12:50:57 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c
Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac
2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9
Send announcement packets only if there are any announcements to send
2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
