d866e6bd34
Make RPL route lifetime RFC compliant
2017-01-13 10:54:06 +01:00
ca3a4726d1
Rename two macros related to multicast, which are not user configuration
...
- UIP_CONF_IPV6_MULTICAST -> UIP_IPV6_MULTICAST
- RPL_CONF_MULTICAST -> RPL_WITH_MULTICAST
2016-06-20 16:35:09 +02:00
b074e5c3e0
Replece UIP_IPV6_MULTICAST_RPL in a comment with RPL_CONF_MULTICAST
2016-06-20 16:35:09 +02:00
1a7133bbf2
Simplified configuration of RPL non-storing mode
2016-06-08 14:03:21 +02:00
b3e31e1456
Implement RPL non-storing mode
2016-06-08 14:02:45 +02:00
cd76b4b1c2
RPL: support for run-time selection of the OF. RPL_OF_OCP defines the OF to be advertised at the root, while RPL_SUPPORTED_OFS defines the set of supported OFs
2016-06-03 15:46:08 +02:00
426e10c3ed
Rehauling of RPL OFs, both MRHOF and OF0. Fixed compliance with RFC6551, 6552, 6719. Now using the link-stats module.
2016-06-03 15:46:06 +02:00
12a75c3e43
fixed codestyle, improved APIs, and cleaned up comments
2016-03-26 20:12:52 +01:00
8afe3fb9b7
fixed so that DAO NACK now is either for the path or for RPL root - if from root then do not try to switch parent since that will not help
2016-03-26 09:45:38 +01:00
444015df67
refactored the rpl-nbr-policy to be called from nbr-table module
2016-03-26 09:45:37 +01:00
3fd8c4db2d
added nbr policy for Contiki RPL that avoids thrashing the nbr table with new entries all the time
2016-03-26 09:45:36 +01:00
946be77248
Added support for end-to-end DAO ACK for Contiki RPL.
...
This is a fix for Contiki RPL so that it fully supports DAO ACK in
an end-to-end fashion. When DAO is sent it will be forwarded upwards
as before. DAO ACK will be forwarded downwards until it reach the node
that initiated the DAO ACK and unlike before it is not a single-hop
DAO ACK but it is fully reaching the RPL ROOT before any DAO ACK is
sent back. DAO ACK also now fully support different status messages
(success / fail).
2016-03-26 09:28:08 +01:00
94c26b90d0
Merge pull request #1091 from simonduq/rpl-loop-repair
...
Enhanced RPL loop repair
2015-12-01 15:36:53 +01:00
33f8db0dd3
RPL: clearer naming and documentation of DAO delay constants
2015-11-18 14:06:18 +01:00
8159297bfd
Add configuration of DIS interval and DIS start delay to rpl-conf.h
...
Make a define for configuration of DIS start delay and move it + existing DIS interval conf into RPL-conf.h
2015-11-02 13:23:33 +01:00
34126173b4
Add DAG lifetime
2015-09-30 15:48:36 +02:00
a7ce312ee3
Enhanced RPL loop repair: send unicast DIO to source when detecting a loop from ext header, update rank along the path (when rank error is signaled)
2015-09-17 22:53:12 +02:00
4d5c749cf7
removed locking of rpl-parent since it was never unlocked - moved to routing module
2015-08-27 18:45:06 +02:00
05d2d843da
Merge pull request #1053 from simonduq/rpl-probing
...
RPL probing
2015-05-10 17:22:10 +02:00
06daa08ffc
Added a function for getting the default RPL instance
2015-05-10 10:51:11 +02:00
47ba4c0c4b
Implement RPL probing
2015-05-08 14:32:00 +02:00
ccbfa388f6
Add more RPL stats
2014-12-19 10:51:03 +01:00
3fb0d69be6
Remove duplicated configuration parameters definition
2014-04-18 15:37:31 +02:00
ce2ed95b93
Merge pull request #585 from g-oikonomou/generic-icmp6-in-hooks
...
Generic ICMPv6 input hooks
2014-04-14 16:12:10 +02:00
017697f91d
Register generic ICMPv6 handlers for RPL
2014-04-04 00:09:27 +01:00
5aca90e73d
Use the same scale for ETX calculation as for rank calculations to avoid conversion errors between the two.
2014-03-27 15:44:15 +01:00
da4ce5b54d
RPL Multicast group management with MOP 3
2014-03-05 20:31:15 +00:00
5f3fe7f7c7
Updated include paths for the moved files under net/
2014-01-26 23:20:23 +01:00
4e6fe7dda6
Add a neighbor table entry if a DAO is received from a node where we don't yet have a neighbor table entry.
2013-11-24 15:17:52 +01:00
61ea7fbb1c
RPL DAO timers and management:
...
* Added a DAO lifetime timer that sends out a new DAO after half the lifetime of the DAO. This allows implementing DAO route soft state that avoids routing tables in the network keeping stale routes for ever.
* Added ways to schedule a new DAO transmission as well as cancelling an active DAO transmit timer, which makes it possible to do nodes that don't send DAOs.
2013-11-24 15:17:51 +01:00
c50d10aa53
Make RPL use neighbor tables. RPL locks the neighbor used as preferred parent.
2013-08-19 17:48:30 +02:00
c4a121bf18
No-Path DAO Propagation
2013-07-25 11:19:56 +02:00
e02d480ff5
Moved RPL Lifetime configuration to rpl-conf.h
2013-03-09 16:28:43 +01:00
aaf5deabe2
Allow user configuration of RPL Lifetime and Lifetime Unit
2013-03-09 16:27:37 +01:00
ea92365cd4
Merge pull request #102 from cetic/rpl-conf-init-link-metric
...
Makes RPL Initial Link Metric configurable
2013-03-09 05:52:07 -08:00
26fc2fab87
Bug fix: changed the macro RPL_LOLLIPOP_INCREMENT to update the counter instead of returning the new value since this is how the macro is used today.
2013-02-12 16:06:04 +01:00
95ab192e88
Makes RPL Initial Link Metric configurable
2013-02-01 09:02:31 +01:00
8538aaf655
Made RPL DAO latency configurable
2012-11-27 23:04:31 +01:00
e94718f95c
Separated configuration into a new file called rpl-conf.h. Improved the documentation.
2012-04-22 00:17:10 +02:00
3d0d2c284f
Changed function names.
2012-04-17 23:34:47 +02:00
d0e2d9b47e
Cleaned up code style, comments, and print outs. Set default DAG parameters when the DIO configuration option is missing.
2012-02-29 21:59:50 +01:00
5a65e3cc8b
tuned RPL parameters and improved calculation of path etx
2012-02-21 19:06:58 +01:00
d89a4ef4fd
Simplified best_dag function and fixed the previous incomplete commit.
2012-01-04 14:13:54 +01:00
f112fa99d5
Removed the force flag from rpl_reset_dio_timer. Removed an unnecessary DIO timer reset when changing rank but keeping the same preferred parent.
2012-01-04 11:22:11 +01:00
c9ac19b919
Allocate the default_instance pointer in rpl-dag.c instead of the
...
header file to fix "multiple definition of `default_instance'" errors.
2011-12-09 08:36:23 -05:00
ac869185c0
Refactored header management.
2011-12-02 15:55:07 +01:00
0e32956a63
Merge remote-tracking branch 'sf/master' into rpl-patch
2011-11-21 14:59:31 +01:00
644f1c627d
Initialize the DIO object in case options are missing. Updated the terminology regarding options.
2011-09-05 20:28:50 +02:00
dc9cbe647d
Changes in RPL implementation :
...
- Structural modification of RPL data storage.
- Support multiple gateways (multiple DODAG-ID with a unique InstanceID)
- Use Lollipop counters
- Add leaf-only configuration option for RPL
Bugfix :
- Correctly send "Grounded" flag in DIO
2011-07-11 16:52:45 +02:00
b1fea35e47
Fixed issues with propagation of the route lifetime configuration. Removed deprecated configuration parameters.
2011-06-28 17:08:44 +02:00
Laurent Deru
Yasuyuki Tanaka
Simon Duquennoy
Simon Duquennoy
Joakim Eriksson
Andreas Urke
Nicolas Tsiftes
Adam Dunkels
George Oikonomou
George Oikonomou
Sébastien Dawans
Adam Dunkels
Niclas Finne
Mariano Alvira
Vincent Brillault