nvt-se
83f2b9ae57
include ctimer.h, since ctimer's are used in the neighbor_discovery_conn struct.
2009-05-30 19:40:39 +00:00
nvt-se
d9b75b2fda
stop the watchdog while merging.
2009-05-26 14:27:06 +00:00
nvt-se
9277f922f1
fixed some documentation typos.
...
also uc -> unicast, stuc -> stunicast.
2009-05-26 13:58:53 +00:00
nifi
f39d2bd4c6
Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids.
2009-05-26 12:08:29 +00:00
nvt-se
88766d8740
use unsigned for sector count type.
2009-05-25 22:10:04 +00:00
nvt-se
e2bbdbca9b
decrement TTL right after forwarding check.
2009-05-19 11:54:50 +00:00
nvt-se
b0a8154e96
make it possible to accumulate CRC values through crc16_data.
2009-05-14 12:05:04 +00:00
nvt-se
2978270e43
decreased the code size to less than 5000 bytes. (msp430 code)
...
improved clarity in read and write code.
added negative offset check in cfs_seek().
removed unnecessary multiplication.
2009-05-13 13:27:19 +00:00
nvt-se
995e788d73
Fixed append->modify->append bug.
...
Approximately doubled the speed of file reservations.
Reduced the compiled code size by about 100 bytes by removing redundant code.
2009-05-11 16:35:49 +00:00
nvt-se
74e9bc8789
Added flash reads and writes to energest.
2009-05-11 15:26:24 +00:00
adamdunkels
5308a09dd3
Added debug output
2009-05-10 21:10:23 +00:00
adamdunkels
02734c9806
Bugfix: must copy the sender and receiver addresses from the packetbuf buffer, otherwise an application program may overwrite them
2009-05-10 21:10:02 +00:00
adamdunkels
fe5a1f1068
Added an optimization option that avoids multiple simultaneous broadcasts from neighbors: when a broadcast is to be sent, a sender does not send until it knows that no other nodes are broadcasting.
2009-05-10 21:09:05 +00:00
adamdunkels
fe30886b37
Added functionality for decaying routes: when a packet is sent over a route, it is decayed. If the route is not refreshed within four packets (with the route_refresh() function, which is called when a new packet arrives), the route is dropped. A route can be decayed at most once per second
2009-05-10 21:08:01 +00:00
adamdunkels
6bf8e0b478
Bugfix by Takahide Matsutsuka: too few items in array, which caused problems with sdcc
2009-05-08 08:52:55 +00:00
zhitao
48d4800f08
removed reference to undefined function in mspgcc
2009-05-06 15:34:28 +00:00
adamdunkels
c330b23c57
Minor documentation addition
2009-05-06 15:07:35 +00:00
adamdunkels
1d921ddf42
Explicit typecast to avoid compiler problems
2009-05-06 15:07:09 +00:00
adamdunkels
0adceb63b4
Code cleanup; made encounter optimization explicit; added optimization for adaptive off-time, but it currently seems to work bad with broadcasts
2009-05-06 15:06:38 +00:00
adamdunkels
9fff85757d
Code cleanup; made strobe transmission time longer again (seems to work better in cooja?)
2009-05-06 15:05:28 +00:00
adamdunkels
a671ea1146
Documentation fix
2009-05-06 15:04:20 +00:00
zhitao
58940ecbf8
minor documentation fixes
2009-05-06 08:37:48 +00:00
nvt-se
55ec3093ec
removed complicated and mostly unused EOF hint code.
2009-05-04 22:30:32 +00:00
nvt-se
8e52b1bcfd
made the documentation more clear.
2009-05-04 22:29:48 +00:00
adamdunkels
1752b53f74
Refresh routes when a packet is received. Set a conservatively low route timeout (10 seconds).
2009-05-04 11:24:04 +00:00
adamdunkels
c83c5c4c55
Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception)
2009-05-04 11:23:30 +00:00
adamdunkels
f5a57a4e54
Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)
2009-04-30 20:21:06 +00:00
adamdunkels
e70cf0c7c6
Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.
2009-04-29 20:48:57 +00:00
adamdunkels
c489b1118d
New module: packetqueue. The packetqueue module maintains packet queues for other modules.
2009-04-29 20:47:30 +00:00
nvt-se
17fa2f1618
make sure that page isolation is called after erasing a sector in reluctant GC.
...
simplified the GC logic a bit.
2009-04-29 13:15:59 +00:00
adamdunkels
cc44e89415
Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote)
2009-04-29 11:42:13 +00:00
adamdunkels
c02a82ac41
Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon
2009-04-29 11:40:33 +00:00
adamdunkels
92862ad2a5
Increased the number of iterations for ugly-hack-loop that checks if a transmission has started, to accommodate a faster CPU speed on the MSP430
2009-04-29 11:38:50 +00:00
adamdunkels
c9df0ab123
Bugfix in debug message printout
2009-04-28 14:01:46 +00:00
adamdunkels
81ef83b856
Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission.
2009-04-28 14:00:53 +00:00
adamdunkels
fdd05f5c71
Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net
2009-04-28 13:52:04 +00:00
fros4943
7810d362a6
minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer
2009-04-16 14:32:01 +00:00
nvt-se
3f205a1413
reluctant gc will now wait until the sector has no free pages
...
before erasing the sector.
2009-04-13 22:26:31 +00:00
nvt-se
c0fb680f12
simplified code by using udp_broadcast_new.
2009-04-13 19:55:15 +00:00
nvt-se
9765df97e5
support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner.
2009-04-13 19:54:07 +00:00
adamdunkels
ef4f5cc0e5
Made TCP MSS configurable
2009-04-10 00:37:48 +00:00
nifi
84b38de494
removed bitfields for compatibility with cc65
2009-04-09 21:54:09 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
nvt-se
03cd533712
made LISTEN_TIME and OFF_TIME configurable.
2009-04-07 11:29:08 +00:00
nifi
a3777852d4
* Corrected address for setting key 1
...
* Added missing include
2009-04-07 09:22:58 +00:00
adamdunkels
5e456aea7d
Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting
2009-04-06 22:50:35 +00:00
adamdunkels
ace6567815
Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions
2009-04-06 21:20:35 +00:00
adamdunkels
be1c8ccec9
Added debug printouts
2009-04-06 21:19:34 +00:00
adamdunkels
d02ac74bbc
Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers
2009-04-06 21:19:00 +00:00
adamdunkels
d298fcbbd0
Changed name of the internal struct memb_blocks to struct memb for consistency
2009-04-06 21:18:03 +00:00
nifi
000f740adc
typo
2009-04-06 15:54:07 +00:00
nifi
eab96e9b53
added rime-udp.c
2009-04-06 14:10:57 +00:00
nvt-se
d6869018c7
turned off debugging.
2009-04-06 13:27:37 +00:00
nifi
9f2ff48fda
added 802.15.4 frame packeter
2009-04-06 13:19:03 +00:00
nvt-se
3b2ad9cfc4
added packet forwarding and replaceable routing modules.
2009-04-06 13:18:50 +00:00
nvt-se
461ba4082c
in case UIP_CONF_ROUTING is set, check if we have a registered routing
...
module and use it for looking up the next hop of an address.
2009-04-06 13:18:12 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
nvt-se
4507891ed5
made gc on removal configurable since it decreases wear levelling.
...
cleaned up some code.
2009-04-02 14:20:04 +00:00
nvt-se
1425537a13
Introduced two garbage collection mode: greedy and reluctant.
...
The greedy GC mode attempts to erase as many sectors as possible, and
it is therefore a slow operation, since the flash driver must wait
for about a second after erasing one sector. The former behavior was
to always do a greedy GC if file reservations fails due to lack of space.
The new reluctant GC stops after erasing one sector, and therefore
we often do not have to wait if there is no file system operation
in the time while the sector is being erased. We call the garbage collector
using this mode when removing a file that is not a micro log file, since
the remove function is called recursively for micro log files that are
erased because the corresponding ordinary file is erased.
This change increases the coffee test (examples/sky/test-coffee.c) speed
from 9 to 5 seconds.
2009-04-02 11:22:23 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
6a6bb53f2e
merged files must always inherit the old file end.
2009-03-26 15:57:52 +00:00
nvt-se
04ccf215e4
dereference gc_wait
2009-03-26 15:45:55 +00:00
nvt-se
d8caaca289
listen time and off time parameters configurable from outside because cc1020 needs longer listen time.
2009-03-26 12:50:57 +00:00
nvt-se
8785bee644
avoid repetitive garbage collection if no files have been deleted since
...
the last try.
2009-03-26 12:36:10 +00:00
fros4943
a9f0729f2c
forcing 16-bit aligned data memory
2009-03-26 12:25:05 +00:00
adamdunkels
cb4684d720
Bumped version number to 2.2.3
2009-03-24 14:09:22 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c
Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac
2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9
Send announcement packets only if there are any announcements to send
2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
nvt-se
bffbb06d4a
corrected GC page isolation loop.
...
adjusted cfs_coffee_reserve signature to use cfs_offset_t instead of uint32_t.
made cfs_coffee_format also to clear *next_free.
2009-03-20 15:15:43 +00:00
nvt-se
b7bdfe8daf
bugfixes:
...
* set invalid page on all removed files which have cache entries.
* update file cache entries earlier to prevent overwrites.
2009-03-19 20:44:43 +00:00
nvt-se
4b6c110706
fixed documentation typos.
2009-03-17 20:28:44 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nifi
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
nvt-se
13b364bcc1
fixed documentation typos.
2009-03-15 20:29:04 +00:00
nvt-se
41ca9516a7
fixed documentation typos.
2009-03-15 20:21:16 +00:00
adamdunkels
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
julienabeille
2a173b465a
more printing in debug mode
2009-03-10 08:00:59 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
