oliverschmidt
3229e5fa9d
Minor source consistency improvement.
2006-12-29 00:06:32 +00:00
barner
d4b3436d21
Add new plattform definition for the STK 501 board featuring an
...
Atmel ATmega128.
Very brief instructions:
- Configure your programmer etc. in Makefile.stk501
- Use 'make upload' to flash your STK501.
- Setup a SLIP connection to your board (on the first serial port)
and make sure you can ping it.
- Use 'make loadable_prg.ko' to build a demo module.
- gcc -ocodeprop ../../tools/codeprop.c
- ./codeprop <IP of STK> loadable_prg.ko
- Watch the module print "Tick, Tack, Tick, ..." on the second
serial port.
2006-12-22 17:19:22 +00:00
bg-
8adcee17c3
* Typo in comment.
...
* Use nm and awk to create namelist.
2006-12-20 13:46:14 +00:00
adamdunkels
b8b47d2cc9
Added cfs-eeprom
2006-12-19 09:19:14 +00:00
adamdunkels
163541eaf5
Added note on burn-nodeid
2006-12-19 09:18:11 +00:00
fros4943
bd2b6a9a53
bug fix:
...
&uip_buf[UIP_LLH_LEN]
may not always be equal to
uip_buf
2006-12-11 15:19:34 +00:00
bg-
d8e0b4eb26
* New rule for making .ko:s.
2006-12-05 16:19:43 +00:00
fros4943
4e166903a4
minor adjustment.
...
changed simulated MAC to wait for clear channel on surrounding -80 dB or larger (instead of -150)
2006-12-04 15:26:33 +00:00
bg-
7b1dd9627a
* Switch to channel 15.
...
* We are powered via USB and there is really no need to put the CPU to
sleep when CPU is idle.
2006-12-01 14:58:58 +00:00
bg-
b9f81cf915
Move to channel 15.
2006-12-01 14:57:19 +00:00
bg-
60e930a64d
Kernel with static IP configuration.
2006-12-01 14:56:39 +00:00
bg-
5345925ce6
* Kernel ssd.c is gone.
...
* New kernel client.c with static IP configuration.
* Replace elfloader.c with new cle.c and elfloader_compat.c. Taken
together they requires less ROM and RAM than the old version.
2006-12-01 14:55:15 +00:00
bg-
fc368b6946
ssd is gone
2006-12-01 14:50:06 +00:00
fros4943
5836d232cf
restored old post-link names (_cooja_sw -> cooja_sw)
2006-11-06 22:25:12 +00:00
fros4943
76055eba40
test: use pre-link asm names (earlier didn't work with some gcc ex. typical cygwin)
2006-11-06 18:07:24 +00:00
fros4943
cc53f38fbb
added:
...
- include contiki system symbols option (no need for the missing elf-loader files)
(including symbols not working without a few additional files)
2006-11-06 18:03:34 +00:00
bg-
9ead26e626
Like the dhclient.c kernel but with static IP configuration.
...
172.16.0.9/16 and default router 172.16.0.1.
2006-10-27 13:08:15 +00:00
fros4943
e528b527e6
moved cooja cfs files from /dev to /cfs
2006-10-23 16:07:29 +00:00
adamdunkels
c67ce1c1b0
Added hack for letting nodes signal that they are 'done'. The simulator exits when all nodes are done. Fixed random initialization so that it is different for all nodes.
2006-10-23 09:01:06 +00:00
fros4943
722f3c7e85
bug fix causing several quick resends to be destroyed
2006-10-22 11:29:05 +00:00
oliverschmidt
8b319eef83
Updated/improved documentation.
2006-10-14 23:48:51 +00:00
fros4943
d0ec0a48a4
added experimental radio channel support
2006-10-11 15:13:57 +00:00
fros4943
0914fe489e
added Contiki Filesystem (CFS) support in COOJA: core interface, glue driver
2006-10-11 14:16:10 +00:00
fros4943
e8daead842
added Contiki Filesystem (CFS) support in COOJA: test process
2006-10-11 14:15:16 +00:00
fros4943
dd0890b4dd
added Contiki Filesystem (CFS) support in COOJA
2006-10-11 14:14:41 +00:00
fros4943
b1afe2257b
changed simulated mac protocol;
...
waiting for both hw and ether at the same time
2006-10-11 09:06:41 +00:00
nifi
be942b531b
added counter for avg sstrength
2006-10-10 23:16:10 +00:00
bg-
2c85f3b19f
Use leds_toggle rather than leds_(on|off).
2006-10-10 18:25:36 +00:00
adamdunkels
bc8016543a
Make netsim more like the esb target
2006-10-10 15:58:31 +00:00
nifi
11c1762a62
updated API and added active flags because some sensors react on radio activity
2006-10-10 12:37:04 +00:00
adamdunkels
8a3481d632
Removed old file
2006-10-10 10:10:40 +00:00
bg-
3ccac34c3d
Forgot to add sample kernel.
2006-10-10 08:30:48 +00:00
nifi
271968e104
added flag to enable/disable sensor event broadcast
2006-10-09 21:08:51 +00:00
nifi
30822b5703
added active flags because some sensors react on radio activity
2006-10-09 21:05:37 +00:00
fros4943
85fa271548
added special fix for new direct udp packet transmissions via tcpip_input()
...
delaying tcpip_input call until yieldable
2006-10-09 14:42:25 +00:00
fros4943
5c4f07dcf0
changed to explicit no yield allowed flag
2006-10-09 14:13:42 +00:00
fros4943
774b977fe9
added simple surrounding signal strength checking before transmitting
2006-10-09 14:13:04 +00:00
fros4943
5b66565c86
no initial signal strength by radio sensor
2006-10-09 13:46:08 +00:00
adamdunkels
5a5b964b2e
UPdated to latest hc.c API
2006-10-09 11:56:49 +00:00
adamdunkels
5e98ede3a3
Updated to not rely on uIP
2006-10-09 11:56:13 +00:00
adamdunkels
d9109e9e83
Two types of radio sensor data
2006-10-09 11:55:42 +00:00
adamdunkels
abfe686c6d
Updated to latest uIP API
2006-10-09 11:55:30 +00:00
adamdunkels
43d567e5f3
Added node-id.h
2006-10-09 11:55:16 +00:00
adamdunkels
25ac16ff2c
Added radio sniffer program
2006-10-09 10:08:40 +00:00
nifi
39098934a6
refactored putchar to make it replacable
2006-10-09 09:19:02 +00:00
oliverschmidt
ca05ae80a5
Added automatic detection of Ethernet address - this makes the WinPcap packet driver service kind of working :-)
...
First the WinPcap library is used to enumerate the existing interfaces to make sure that only those are taken into account which the WinPcap library is able to actually work with. Their IP addresses are compaired against the one on the cmdline to find the desired interface.
Then the IP Helper API is used to enumerate the existing adapters to find out the the Ethernet address of the desired adapter. This Ethernet address is then used by Contiki too.
2006-10-06 22:39:31 +00:00
fros4943
880b3df797
added flags for checking if we are inside process_run()
2006-10-06 10:47:09 +00:00
fros4943
df9ece582b
make sure we are inside process_run() before yielding
2006-10-06 10:45:53 +00:00
fros4943
69657d579d
added radio sensor for signal strength etc.
2006-10-06 10:44:03 +00:00
adamdunkels
0e8cdd9e8e
Added radio signal strength simulation
2006-10-06 08:25:30 +00:00