oliverschmidt
a6a2d5de9f
Fixed recently introduced minor inconsistency.
2010-09-29 09:35:56 +00:00
oliverschmidt
cd24e920b6
Made cfs-based webserver example compatible with 8.3 file systems.
2010-09-28 20:40:52 +00:00
adamdunkels
0261af4af2
Made use of the new collect keepalive timer
2010-09-22 22:11:20 +00:00
adamdunkels
b72e90597e
Rewrote the default powertrace_sniff() behaviour. Instead of printing
...
out power data for all incoming and outgoing packets (which causes
problems when there is much traffic), the power data for the packets
is instead logged and periodically printed out in aggregated form.
2010-09-22 22:09:52 +00:00
adamdunkels
2be8454a15
Const and typecast bugfix
2010-09-14 07:18:14 +00:00
adamdunkels
f11b0d56ee
Fixed compilation error
2010-09-14 06:40:17 +00:00
adamdunkels
6794154aa5
Set a default value for 'send' commands without arguments
2010-09-13 19:15:21 +00:00
adamdunkels
3be23eb3fc
Fixed alignment issue
2010-09-13 13:29:47 +00:00
adamdunkels
f1769a3622
Added the number of hop-by-hop retransmissions to the 'send' command
2010-09-13 13:29:29 +00:00
oliverschmidt
a5dff5e08a
Up to now the root of the webserver filesystem was always the current directory. Now an optional file 'wwwroot.cfg' is read. If present its content is used as prefix in the conversion of http paths to local paths. This prefix may be a relative path as well as an absolute path.
...
This is especially useful for the cc65-based targets as it ain't possible there to "just change into the wwwroot directory and start the webserver using its pathname".
2010-08-30 19:44:38 +00:00
oliverschmidt
05f938e7c1
Converting the last screen line from ASCII to PETSCII as it was done up to now almost never makes sense. Either the conent to be converted is not the last screen line or the last screen line was already converted (and is incorrectly converted back). Therefore now only a partial line not already converted before gets converted.
2010-07-21 21:03:06 +00:00
adamdunkels
11e25499a5
Servreg-hack makefile
2010-06-15 20:01:10 +00:00
adamdunkels
f8437ad545
Periodically increase sequence number to avoid active registrations being garbage collected in neighbors
2010-06-15 19:32:29 +00:00
adamdunkels
5dc55f0a1b
A quick and dirty service registry daemon hack. The servreg-hack
...
allows a program to register an 8-bit service ID that gets
disseminated to the entire network, as long as a servreg-hack daemon
is running on all neighbors. Other nodes can look up the service ID to
figure out what nodes in the network offer this service.
This is officially labeled as a "hack" so that we don't get too comfy
with it; this hack is not the future of service discovery and
advertisement in Contiki.
2010-06-15 19:00:28 +00:00
adamdunkels
951fd78f6c
ctimer moved from net/rime to sys/
2010-06-14 18:58:45 +00:00
nifi
f537fac5f0
Made arguments const to allow constant strings as arguments
2010-06-14 14:08:17 +00:00
nifi
a453acd325
Added support for IPv6 URLs
2010-06-09 08:36:43 +00:00
nifi
b54c6e673b
Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t for compability with IPv6
2010-05-31 15:22:08 +00:00
adamdunkels
e53b93384a
Print out rdc instead of mac
2010-04-30 07:17:50 +00:00
adamdunkels
bac84c314c
Don't include sniffer code when using IPv6 - this saves significant code space because Rime won't be pulled in
2010-04-30 07:17:21 +00:00
nifi
a5264324b5
Added missing urlconv.c for optional URL filtering.
2010-04-19 21:25:49 +00:00
nvt-se
75690c3399
Improved configuration for low-power wireless networks. Removed legacy code regarding netsim and energest. Fixed bug with state transitions, in which timers were stopped incorrectly.
2010-04-12 14:39:52 +00:00
nvt-se
40f7541f88
Report an error if cfs_write failed.
2010-04-12 13:21:58 +00:00
oliverschmidt
eebbd2694c
Set the maximum number of concurrent web server connections by default to the maximum number of concurrent TCP connections.
2010-04-11 20:54:39 +00:00
oliverschmidt
85082693c5
Added final newline to make GCC happy.
2010-04-11 20:16:56 +00:00
oliverschmidt
f22b0dffb3
Made CFS web server pathname length configurable via WEBSERVER_CONF_CFS_PATHLEN and increased default pathname length from 20 to 80 chars in order to allow to actually make use of subdirs.
2010-04-11 20:10:12 +00:00
oliverschmidt
eae42d02d5
Added optional URL filtering code to the CFS web server contributed by Kajtar Zsolt (and activated it by default).
2010-04-11 19:18:47 +00:00
oliverschmidt
62e6882946
Include slash in CFS web server state field 'filename' (like in the non-CFS web server).
2010-04-11 15:19:34 +00:00
oliverschmidt
157a95ef19
Reduced code size by removing one PT_WAIT_THREAD call site.
2010-04-11 12:29:07 +00:00
nvt-se
fec9171d5d
Print the node ID instead of the first byte in the Rime address. That byte often has the value 0 when using powertrace with IPv6.
2010-04-09 15:47:45 +00:00
oliverschmidt
48f7992a48
Minor syntax simplification.
2010-04-06 20:41:42 +00:00
oliverschmidt
5a3eb98937
Log requests in PETSCII on CBMs in the non-CFS web server (as was already done in the CFS web server).
2010-04-06 20:35:40 +00:00
oliverschmidt
186ab03dd2
Search for last '.' just like in send_headers().
2010-04-06 20:16:25 +00:00
oliverschmidt
37d5c753c0
Copy '/404.html' to filename in order to allow send_headers() to send the proper content type.
2010-04-06 20:10:45 +00:00
oliverschmidt
d1c4b4968c
Added GIF support to the CFS web server (which was already present in the non-CFS web server).
2010-04-06 12:11:41 +00:00
oliverschmidt
69b0727a6d
There are no query strings or alike in the CFS web server so the file extensions have to be the actual end of the requested filename.
2010-04-06 12:03:18 +00:00
oliverschmidt
5c75b89ef7
Reduced code size by reducing the SEND_STRING call sites.
2010-04-06 11:49:47 +00:00
adamdunkels
1fa81eac59
Print out the name of the radio duty cycling mechanism instead of the MAC
2010-04-04 12:27:31 +00:00
adamdunkels
1241aa34d0
Added a function powertrace_print() that prints out the current power trace
2010-03-29 21:49:07 +00:00
adamdunkels
2617274989
Updated to new announcement API
2010-03-25 08:55:20 +00:00
adamdunkels
79ba20ddcc
Updated to new collect router API
2010-03-25 08:52:23 +00:00
adamdunkels
aeec1769dc
Added functions for turning powertracing off
2010-03-19 13:23:31 +00:00
adamdunkels
f2c9b3e813
Remove old neighbor.h inclusion
2010-03-19 13:20:40 +00:00
nvt-se
cfcb6c6b71
Updated for the changed Rime API
2010-03-18 14:25:54 +00:00
joxe
fc738a5809
fixed for new uip6 APIs
2010-03-17 13:19:34 +00:00
joxe
da36724ac8
updated for new uip APIs
2010-03-17 12:27:52 +00:00
fros4943
3769a28516
updated to new sensors API
2010-03-14 19:54:00 +00:00
adamdunkels
331f93b439
Removed the 'nodes' command from the shell: it never really worked
2010-02-28 14:16:19 +00:00
adamdunkels
c4c4e8164d
Enabled compilation without timesynch enabled
2010-02-23 18:22:44 +00:00
adamdunkels
2186d70c59
Added per-packet power profile tracing
2010-02-23 18:22:16 +00:00
adamdunkels
5e6fd67213
Powertrace: a program that periodically prints out the power consumption; suitable for experiments or simulations that want to measure power consumption
2010-02-20 14:15:45 +00:00
adamdunkels
6b523f2446
Fixed compilation without timesynch compiled in
2010-02-18 20:56:12 +00:00
oliverschmidt
340de209c7
Allow to build the webbrowser without history support - by setting WWW_CONF_HISTORY_SIZE to 0.
2010-02-13 10:39:57 +00:00
adamdunkels
ba56b22c03
Potential alignment problem fix
2010-02-04 16:21:15 +00:00
nifi
8cf4821a73
added check for too long server name
2010-02-04 15:23:15 +00:00
adamdunkels
4ea2312f23
Rewrote NULL-termination code to avoid writing to a const array
2010-02-04 14:59:08 +00:00
adamdunkels
35f8d24c2e
Bugfix: zero-terminate string before copying
2010-02-04 11:20:09 +00:00
oliverschmidt
2a6f169e46
- Added yet another PETSCII->ASCII conversion, this time for the file name in case of a 404.
...
- Use all lowercase for the 404 message to avoid another PETSCII->ASCII conversion.
- Write logfile entries for all 404s.
- Adjust memory buffers on the C128 to accomodate for the items above.
2010-02-03 23:19:39 +00:00
adamdunkels
dda757aca7
I made a mess out of the dec64 command being moved to a new module; this commit should fix the previous issues though
2010-02-03 21:53:51 +00:00
adamdunkels
551f7fc7a7
Moved the dec64 command into the shell base64 module
2010-02-03 21:39:25 +00:00
adamdunkels
815468b442
Added missing argument to send_string()
2010-02-03 21:06:51 +00:00
adamdunkels
6fc0c73bac
Reverted the recent addition of the directory listing: instead, a 404 is now sent to indicate that a notfound.html file is missing
2010-02-03 20:41:16 +00:00
adamdunkels
217fa504e7
Small documentation fix
2010-02-03 20:40:00 +00:00
adamdunkels
1a34dbe550
Broke out the base64 commands from the text module
2010-02-03 20:37:29 +00:00
adamdunkels
e029cf489e
When a file was not found, and no notfound.html was found, send directory contents instead
2010-02-02 18:17:55 +00:00
adamdunkels
1a42eac80b
Print out the performance test number for automatic processing
2010-02-02 15:29:24 +00:00
adamdunkels
7ed2af70f9
Two 'peek' and 'poke' commands for reading and writing directly to memory
2010-02-02 15:28:52 +00:00
oliverschmidt
dbfa1efdcf
Allow to build the web browser without DNS support - like i.e. the email client and the IRC client.
2010-02-01 19:44:30 +00:00
adamdunkels
354243afcd
Added missing Rime channel for the runicast debug command
2010-01-31 23:57:22 +00:00
oliverschmidt
76e21b5912
Added conversion of From field from PETSCII to ASCII (and adjusted setup window size to commented-out POP3 settings).
2010-01-31 21:44:49 +00:00
oliverschmidt
de3142c0d4
Made 'Erase' button and dialog optional to make email client compatible with non-windows CTK.
2010-01-31 21:13:38 +00:00
adamdunkels
435add5e17
Added a debug command for testing reliable unicast (runicast) communication
2010-01-31 19:35:12 +00:00
adamdunkels
4938df5c05
Update to Contiki version number 2.4
2010-01-29 18:03:55 +00:00
joxe
318cf56564
fixed for new sensor api
2010-01-14 15:05:40 +00:00
adamdunkels
f50b8db53b
Implement repeats with a periodic second timer to allow for greater range than what is possible with Contiki ctimers. Use RTIMER_NOW() instead of rtimer_arch_now().
2009-12-09 18:12:23 +00:00
adamdunkels
01153b468e
Fixed compliation problem
2009-11-09 08:22:17 +00:00
adamdunkels
01442326b2
Made rimeaddr_t pointers const when they should be
2009-11-08 19:42:59 +00:00
adamdunkels
3c8d51e05f
Added command line options for enabling the four different performance tests
2009-11-04 07:48:18 +00:00
adamdunkels
4928e43880
netperf: a new small shell command that measures the communication
...
performance between two local (single-hop) nodes. It sends packets
over both broadcast and unicast, both in one direction and in both, as
well as tested the stream mode of the underlying MAC protocol.
2009-11-03 22:52:39 +00:00
adamdunkels
2662c87d60
Printout power data as well
2009-11-03 10:04:23 +00:00
fros4943
b0a92c5f4e
added log output + minor fix
2009-10-27 10:46:24 +00:00
adamdunkels
63f927fc8d
Added missing string.h include, for memset()
2009-10-18 11:42:06 +00:00
adamdunkels
bddd31abf2
Fixed compiler warnings
2009-09-09 21:06:51 +00:00
dak664
0798c56899
Print ipv6 address in weblog and tcp_stats cgi
2009-08-12 18:23:37 +00:00
dak664
8d9f8e3a17
ipv6 address logging
2009-08-11 16:07:54 +00:00
joxe
92f8ac6a2b
added webserver-nogui.c to webserver sources
2009-06-23 21:06:34 +00:00
nvt-se
2b1053f0e3
shorten file size function by using the new CFS_SEEK_END.
2009-05-15 23:04:15 +00:00
nvt-se
79b7cab36e
the third read parameter must be checked for existence.
...
updated the documentation to cover the third parameter.
2009-05-12 14:22:58 +00:00
adamdunkels
fd6dd95b9b
Removed unused include serial-shell.h
2009-05-11 17:31:13 +00:00
adamdunkels
2c6c665309
New Twitter tweet commands added
2009-05-11 17:11:56 +00:00
adamdunkels
6808bb387b
A shell command for posting a #sensortweet message to Twitter
2009-05-11 17:11:37 +00:00
adamdunkels
3bb946fa51
A shell command for posting arbitrary messages to Twitter
2009-05-11 17:10:55 +00:00
adamdunkels
a3101e14de
Contiki program that posts messages to the Twitter microblogging service
2009-05-11 16:57:49 +00:00
adamdunkels
a220da3e88
Added new shell commands
2009-05-10 21:05:06 +00:00
adamdunkels
f6dbf82e05
Added two commands: unicast-send and unicast-recv that can be used to send unicast data
2009-05-10 21:04:40 +00:00
adamdunkels
904bb1487c
Broke out the 'neighbor' command functionality from the shell-rime.c file; reimplemented it to use the announcemnet primitive instead
2009-05-10 21:04:06 +00:00
adamdunkels
8458a4fe28
Added a 'netstat' command that (currently) shows active TCP connections
2009-05-10 21:02:24 +00:00
fros4943
8f66601a5a
fixed compiler warnings (as suggested by Niclas Finne)
2009-04-20 13:18:07 +00:00
fros4943
a23b4fd40b
two new shell commands: download and sendcmd
2009-04-16 14:33:47 +00:00
nvt-se
ddbc5a9555
send only packets in the request set. reset the request set immediately
...
after sending the packets.
2009-04-07 14:07:39 +00:00
adamdunkels
5d8d7844bb
Avoid alignment problems by copying the crc from the header field into a local variable
2009-04-06 23:29:31 +00:00
adamdunkels
01d39d4149
Made sure netcmds are null-terminated
2009-04-06 21:17:34 +00:00
adamdunkels
dc8338d248
Fixed alignment problem on the MSP430, where the ping message may be misaligned
2009-03-31 17:39:36 +00:00
fros4943
2e156afe2a
bugfix: cfs_open must get aquire permissions
2009-03-26 12:22:52 +00:00
adamdunkels
ecb7641ca7
from address is const
2009-03-24 14:44:42 +00:00
nvt-se
571c815ad3
use unsigned long to print total file size.
2009-03-19 20:42:39 +00:00
adamdunkels
fb7fc1990d
Fix types to make cc65 happy
2009-03-17 21:49:44 +00:00
adamdunkels
a6be9a6d3c
Removed NULL pointer to make sdcc happy
2009-03-17 20:12:55 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
5920a86312
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
2009-03-12 19:15:23 +00:00
adamdunkels
4519f07a9b
Fixed IPv6 compilation problems
2009-03-07 09:32:41 +00:00
adamdunkels
2289ced2bb
Fixed compilation problems, added new commands to shell.h
2009-03-06 07:23:08 +00:00
adamdunkels
ddafef15e9
Added three commands for IP interaction in the shell: ping (sends ICMP ping messages), tcpsend (sets up TCP connections for sending and receiving data), and udpsend (sends and receives UDP packets)
2009-03-06 00:29:33 +00:00
adamdunkels
6d545730ba
Added a telnet_connect() function
2009-03-05 23:56:56 +00:00
adamdunkels
482de817e0
Renamed the Rime 'ping' command to 'rime-ping' to differentiate it from the IP ping command
2009-03-05 23:54:14 +00:00
adamdunkels
a3daf1d3cc
Refactored the power commands out from the sky-specific shell commands into its own module. Also added compower idle consumption in the energy and power reports.
2009-03-05 21:12:02 +00:00
adamdunkels
d52a527752
Added support for sniffing for packet attributes for both incoming and outgoing packets
2009-03-02 21:58:16 +00:00
adamdunkels
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
adamdunkels
da591f484f
Added documentation for the shell functions
2009-03-02 20:44:15 +00:00
oliverschmidt
62662ee79b
Override source file sets of included apps to exclude source files that would cause symbols to be defined twice in the Contiki library.
2009-03-01 23:36:47 +00:00
oliverschmidt
eab1ea8c95
Added missing include.
2009-03-01 23:33:46 +00:00
nvt-se
b91b2c1b2d
moved debug macros from header to source.
2009-03-01 12:49:43 +00:00
oliverschmidt
a1b7bf6952
Minor change.
2009-03-01 12:11:17 +00:00
nifi
fb4272866d
changed format of the temperature value to be compliant with new specification
2009-02-27 16:24:49 +00:00
nvt-se
a0226e2418
switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)
2009-02-27 14:28:02 +00:00
nvt-se
6b2c1ca2a4
coding style compliance.
2009-02-26 14:55:29 +00:00
nvt-se
703df7bb48
removed bitfields.
2009-02-25 17:09:55 +00:00
nvt-se
31bc37a043
Added Deluge and tests for it.
2009-02-25 17:00:00 +00:00
fros4943
cb56161c94
moved ipv6 udp example processes from apps/udp to inside examples/udp-receiver-ipv6 and examples/udp-sender-ipv6
2009-02-25 12:10:10 +00:00
adamdunkels
40003196ef
#include ctk-textentry-cmdline.h, plus a bunch of whitespace removed
2009-02-25 08:52:27 +00:00
adamdunkels
8d1615459a
Added dummy function callback because sdcc does not like NULL function pointers
2009-02-24 21:28:43 +00:00
adamdunkels
d28bfe3f58
Fixed ugly function pointer cast by implementing a wrapper function for the protothread function.
2009-02-24 21:27:43 +00:00
adamdunkels
47a6eb5210
Fixes by Luca Mottola: don't call write with zero-length data; added parameter to specify block size to read command
2009-02-19 22:56:56 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
37e15ab537
Use C rand() instead of random_rand()
2009-02-09 20:54:49 +00:00
fros4943
51006b3f8d
webserver bugfix, caused nightly wget test to fail:
...
* too many timer_reset will naively increase the start-time, even though timer has not expired. use timer_restart instead
2009-02-09 13:04:37 +00:00
adamdunkels
37b86b9236
Added cr/nl to end of prompt to make scripting easier
2009-02-08 19:28:57 +00:00
fros4943
bf39076206
added experimental checkpointing functionality:
...
currently only implemented on the sky platform
2009-02-04 17:49:15 +00:00
julienabeille
2218d8ef8b
Added an application and example to run IPSo interoperability test using RAVEN boards
2009-01-27 10:57:28 +00:00
nvt-se
53355d095c
increase file size range for display in the ls command.
2008-12-01 15:58:14 +00:00
adamdunkels
eb2ecc69a2
Added an irc shell command that runs an IRC client from the shell.
2008-11-28 00:16:15 +00:00
adamdunkels
abe482713b
Bugfix: rewrote the switch() statement into an if/else sequence. Protothreads and switches do not mix well.
2008-11-28 00:15:43 +00:00
adamdunkels
3713d1fcf9
Fixed the repressentation of IP addresses: IP addresses are uip_ipaddr_t nowadays
2008-11-28 00:14:57 +00:00
nvt-se
1389555ad5
adjusted shell for the generic remove command.
2008-11-24 15:18:27 +00:00
c_oflynn
8bae6890a8
Changes by "David Kopf" <dak664@embarqmail.com> to:
...
-Add hit counter to index.html
-Adding link to favicon.png
-Fix serving of binary (image) files in avr-makefsdata file
Changes by Colin O'Flynn:
-Removed extra linebreak in tutorial-raven.txt
-Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
c_oflynn
a0a9ccf2db
Changes to raven-webserver by "David Kopf" <dak664@embarqmail.com>:
...
*Fixed bug in the cgi script handling
*Making a special check for index.html and treating it like index.shtml to
allow a common header for all files.
*adding robots.txt to keep google, msn, yahoo out
*adding a nice icon through a <link rel="icon"... in the header
*saying "not enabled" for temperature if it hasn't been initialized
2008-11-16 15:28:37 +00:00
adamdunkels
cc73becbd2
Bugfix: a repeat command with 0 interval only ran half its commands because the repeat server process was started during the exithandler of the previous repeat server process. The kernel detected this and did not start every second repeat server process.
2008-11-13 07:51:23 +00:00
oliverschmidt
933aa3bb7e
Keep override directive from breaking win32 build - things are getting quite messy here :-(
2008-11-10 22:45:10 +00:00
