Commit graph

21 commits

Author SHA1 Message Date
Ralf Schlatterbeck 04bbba6c12 Multi-platform support, osd-merkur-{128,256}
Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is
now osd-merkur-128. Also check that everything is consistent.
Add both platforms to the regression tests.
Move redundant files in platform dev directory of both platforms to
cpu/avr/dev. Note that this probably needs some rework. Already
discovered some inconsistency in io definitions of both devices in the
avr/io.h includes. Added a workaround in the obvious cases.
The platform makefiles now set correct parameters for bootloader and for
reading mac-address from flash memory.
Factor the flash programming into cpu/avr and platform/osd-merkur* and
rework *all* osd example makefiles to use the new settings. Also update
all the flash.sh and run.sh to use the new settings.
The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:59:40 +02:00
harald42 b462052bf5 CRLF will be replaced by LF 2016-02-25 08:20:41 +01:00
Ralf Schlatterbeck de6477efa8 Fix run.sh scripts to use jumptable of bootloader
Otherwise a crash results with a bootloader compiled with a newer AVR
toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader
without a jump-table, as a short-term measure you can revert this change
in your run.sh. As a long-term fix we recommend you get your bootloader
updated!
2016-02-19 17:32:09 +01:00
Harald Pichler 0097d192be move dht11 define to project.conf 2015-03-23 13:03:32 +01:00
Ralf Schlatterbeck baaa2c5741 Factor/Fix generic resources
Now the old GENERIC_RESOURCE macros works again (but usage has changed).
Common resources (battery, leds, radio) are now in resources-common.
2015-01-21 15:41:21 +01:00
Harald Pichler aaaa0aa138 cleanup code, batterie value Volt 2014-12-29 08:11:51 +01:00
Harald Pichler 698d8dce90 add coap18 2014-11-26 21:47:00 +01:00
Harald Pichler 824eca3b61 cleanup code, move ds1820 to resources 2014-11-26 17:12:34 +01:00
Harald Pichler 7a666307cf add coap 18 2014-11-26 16:46:13 +01:00
Ralf Schlatterbeck 56f6f87c94 Allow changing bootloader_get_mac address
Current default in the Makefile is the *new* bootloader address.
But for backward compatibility we've modified the run*.sh files
to use the old address. The run*.sh also now explain how to change
the default.
2014-11-19 13:42:35 +01:00
Harald Pichler 1efbe0736a change resources to simple and make climate2 default 2014-11-19 13:42:13 +01:00
Harald Pichler f2bd00b660 add patch milligrad ds1820 from Jan-Benedict Glaw 2014-11-19 13:37:33 +01:00
Harald Pichler 9906e9736c temp and hum sensors values xxxx -> xx.xx 2014-11-19 13:37:21 +01:00
Harald Pichler e5baf940e7 add dhtxx temp coap 2014-11-19 13:37:13 +01:00
Harald Pichler c3f00a7106 cleanup code 2014-11-19 13:35:18 +01:00
Harald Pichler 29c7297591 bugfix RH03 sensor 2014-11-19 13:33:50 +01:00
Harald Pichler 45ede69308 add dht22 and RHT03 support 2014-11-19 13:33:40 +01:00
Harald Pichler decc9fcb0f bugfix buffers 2014-11-19 13:32:03 +01:00
Harald Pichler 0881290bbc add coap 13 2014-11-19 13:24:58 +01:00
Harald Pichler 558184f106 remove unused code, bugfix const 2014-11-19 13:14:07 +01:00
Harald Pichler 81e6734626 add climate example 2014-11-19 12:04:53 +01:00