Updated makefiles and paths to make a .zip file with demo contents

examples/energest-demo/Makefile

@@ -1,16 +1,31 @@
 
+ifndef CONTIKI
+CONTIKI = ../..
+endif
+
+zip: all jar
+	rm -rf contiki-energest-demo
+	mkdir contiki-energest-demo
+	cp nodeid/*.ihex contiki-energest-demo
+	cp energest-demo.ihex contiki-energest-demo
+	cp -r handouts contiki-energest-demo/
+	mkdir contiki-energest-demo/tools
+	cp -r $(CONTIKI)/tools/sky contiki-energest-demo/tools
+	cp dist/*.jar contiki-energest-demo
+	cp Makefile.contiki-energest-demo contiki-energest-demo/Makefile
+	zip -r contiki-energest-demo.zip contiki-energest-demo
+
 all: burn-nodeids javaapp energest-demo.ihex
 
 burn-nodeids:
 	(cd nodeid; $(MAKE))
 
+jar:
+	ant jar
+
 javaapp:
 	ant compile
 
-ifndef CONTIKI
-CONTIKI = ../..
-endif
-
 # Ensure that ./contiki-conf.h is included
 CFLAGS+=-I.
 

examples/energest-demo/Makefile.contiki-energest-demo

@@ -0,0 +1,13 @@
+CONTIKI=.
+-include tools/sky/Makefile
+
+upload-node-%:
+	$(MAKE) sky-reset burn-nodeid-$*.upload
+	$(MAKE) sky-reset
+	sleep 6
+	$(MAKE) sky-reset energest-demo.upload
+
+upload-sink: upload-node-41
+
+rundemo:
+	java -jar energest.jar /dev/com$(CMOTES)

examples/energest-demo/README

@@ -0,0 +1,82 @@
+This directory contains the compiled code for the Contiki energy
+estimation demonstration for ACM SenSys 2007. More information is
+available in the handouts/ directory and at the Contiki website:
+
+		     http://www.sics.se/contiki/
+
+* INSTALLATION
+
+Cygwin and Java (JRE) needs to be installed. The demo has been tested
+on Microsoft Windows, but probably works under Linux too.
+
+You need between two and eight Tmote Sky boards to run the demo: one
+sink and between one and seven nodes. The nodes are numbered from 42
+to 48, and 41 is the sink node.
+
+Step 1: Unpack the zip file
+
+     unzip contiki-energest-demo.zip
+
+Step 2: Change directory to the demo directory
+
+     cd contiki-energest-demo
+
+Step 3: Connect the sink node to the PC. Remove all other Tmote Sky
+        nodes from the PC.
+
+Step 4: Upload Contiki to the sink:
+
+     make upload-sink
+
+Step 5: Remove the sink node from the PC.
+     
+Step 6: Connect one of the non-sink nodes to the PC
+
+Step 7: Upload Contiki to the node:
+
+     make upload-node-42
+
+Step 8: Remove the Tmote Sky from the PC.
+
+Step 9: Insert batteries into the Tmote Sky. The red LED should light
+        up.
+
+Step 10: Repeat step 6 to step 9 for all non-sink nodes. Replace "make
+        upload-node-42" with "make upload-node-43", "make
+        upload-node-44", and so on.
+
+Step 11: Insert the sink node to the PC
+
+Step 12: Run the Java program:
+
+     make rundemo
+
+     NOTE: this uses the first Tmote Sky it finds as a
+     sink. Therefore, make sure that only one Tmote Sky (the sink) is
+     inserted. 
+
+* DEMO DESCRIPTION
+
+Contiki continuously estimates the energy consumption of the
+system. In this demonstration, seven Tmote Sky nodes, running Contiki,
+estimates their energy consumption and send their power to a sink
+node. The sink node is connected to the PC, and reports the nodes'
+power to a Java program. The Java program shows the nodes' power
+consumption for the last second.
+
+When pushing the button on the nodes, they cycle through seven states
+as below. This is reflected by their power consumption, as shown in
+the Java program. The different states are:
+
+* Red LED: sending one packet per second
+* Green LED: radio listen 1% duty cycle
+* Green, red LEDs: radio listen 10% duty cycle
+* Blue LED: radio listen 100%
+* Blue, red LEDs: radio listen 10%, CPU low-power mode disabled
+* Blue, green LEDs: sending data 1.2 kilobytes/second
+* Blue, green, red LEDs: sending data 12 kilobytes/second
+
+When sending data, the radio is turned on for a while before the
+transmission to check if it is possible to send the packet. This is
+the reason why energy is spent on radio listening even when the nodes
+are only sending data.

examples/energest-demo/src/Demo.java

@@ -28,7 +28,7 @@
  *
  * This file is part of the Contiki operating system.
  *
- * $Id: Demo.java,v 1.2 2007/10/25 18:43:18 adamdunkels Exp $
+ * $Id: Demo.java,v 1.3 2007/11/06 14:46:14 adamdunkels Exp $
  */
 
 /**
@@ -77,8 +77,8 @@ public class Demo extends JPanel {
   public static final int TOTAL_HEIGHT = 300;
   public static final int TOTAL_WIDTH = 900;
 
-  public static final String SERIALDUMP_WINDOWS = "../../../tools/sky/serialdump-windows.exe";
+  public static final String SERIALDUMP_WINDOWS = "./tools/sky/serialdump-windows.exe";
-  public static final String SERIALDUMP_LINUX = "../../../tools/sky/serialdump-linux";
+  public static final String SERIALDUMP_LINUX = "./tools/sky/serialdump-linux";
 
   public static final int HISTORY_MAX_SECONDS = 120;