deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Add combined MCU and radio ATmega128rfa1

Browse source
This commit is contained in:
dak664 2011-02-07 13:46:34 -05:00
parent ee65d0d887
commit f1f32c8e6a
9 changed files with 609 additions and 114 deletions
Download patch file Download diff file Expand all files Collapse all files

61
cpu/avr/radio/rf230bb/hal.h
View file

@ -73,10 +73,12 @@
// RAVENUSB_C : used for USB key or Raven card
// RCB_B : RZ200 kit from Atmel based on 1281V
// ZIGBIT : Zigbit module from Meshnetics
// ATMEGA128RFA1 : Bare chip with internal radio
#define RAVEN_D 4
#define RAVENUSB_C 1
#define RCB_B 2
#define ZIGBIT 3
#define ATMEGA128RFA1 4
@ -166,6 +168,32 @@
# define HAS_CW_MODE
# define HAS_SPARE_TIMER
#elif HARWARE_REVISION == ATMEGA128RFA1
/* ATmega1281 with internal AT86RF231 radio */
#if 0
# define SSPORT B
# define SSPIN (0x04)
# define SPIPORT B
# define MOSIPIN (0x05)
# define MISOPIN (0x06)
# define SCKPIN (0x07)
# define RSTPORT B
# define RSTPIN (0x01)
# define IRQPORT D
# define IRQPIN (0x06)
# define SLPTRPORT B
# define SLPTRPIN (0x03)
# define TXCWPORT B
# define TXCWPIN (0x00)
#endif
# define SLPTRPORT TRXPR
# define SLPTRPIN 1
# define USART 1
# define USARTVECT USART1_RX_vect
# define TICKTIMER 3
# define HAS_CW_MODE
# define HAS_SPARE_TIMER
#elif CONTIKI_TARGET_MULLE
/* mulle 5.2 (TODO: move to platform specific) */
@ -289,6 +317,15 @@
* that the source code can directly use.
* \{
*/
#if defined(__AVR_ATmega128RFA1__)
#define hal_set_rst_low( ) ( TRXPR &= ~( 1 << TRXRST ) ) /**< This macro pulls the RST pin low. */
#define hal_set_rst_high( ) ( TRXPR |= ( 1 << TRXRST ) ) /**< This macro pulls the RST pin high. */
#define hal_set_slptr_high( ) ( TRXPR |= ( 1 << SLPTR ) ) /**< This macro pulls the SLP_TR pin high. */
#define hal_set_slptr_low( ) ( TRXPR &= ~( 1 << SLPTR ) ) /**< This macro pulls the SLP_TR pin low. */
#define hal_get_slptr( ) ( ( TRXPR & ( 1 << SLPTR ) ) >> SLPTR ) /**< Read current state of the SLP_TR pin (High/Low). */
#else
#define SLP_TR SLPTRPIN /**< Pin number that corresponds to the SLP_TR pin. */
#define DDR_SLP_TR DDR( SLPTRPORT ) /**< Data Direction Register that corresponds to the port where SLP_TR is connected. */
#define PORT_SLP_TR PORT( SLPTRPORT ) /**< Port (Write Access) where SLP_TR is connected. */
@ -321,6 +358,8 @@
#define HAL_DD_SCK SCKPIN /**< Data Direction bit for SCK. */
#define HAL_DD_MOSI MOSIPIN /**< Data Direction bit for MOSI. */
#define HAL_DD_MISO MISOPIN /**< Data Direction bit for MISO. */
#endif /* defined(__AVR_ATmega128RFA1__) */
/** \} */
@ -459,17 +498,39 @@ void hal_clear_rx_start_event_handler( void );
uint8_t hal_get_pll_lock_flag( void );
void hal_clear_pll_lock_flag( void );
/* Hack for atmega128rfa1 with integrated radio. Access registers directly, not through SPI */
#if defined(__AVR_ATmega128RFA1__)
//#define hal_register_read(address) _SFR_MEM8((uint16_t)address)
#define hal_register_read(address) address
uint8_t hal_subregister_read( uint16_t address, uint8_t mask, uint8_t position );
void hal_subregister_write( uint16_t address, uint8_t mask, uint8_t position,
uint8_t value );
//#define hal_register_write(address, value) _SFR_MEM8((uint16_t)address)=value
#define hal_register_write(address, value) address=value
//#define hal_subregister_read( address, mask, position ) (_SFR_MEM8((uint16_t)address)&mask)>>position
//#define hal_subregister_read1( address, mask, position ) (address&mask)>>position
//#define hal_subregister_write( address, mask, position, value ) address=(address<<position)&mask
#else
uint8_t hal_register_read( uint8_t address );
void hal_register_write( uint8_t address, uint8_t value );
uint8_t hal_subregister_read( uint8_t address, uint8_t mask, uint8_t position );
void hal_subregister_write( uint8_t address, uint8_t mask, uint8_t position,
uint8_t value );
#endif
//void hal_frame_read(hal_rx_frame_t *rx_frame, rx_callback_t rx_callback);
/* For speed RF230BB does not use a callback */
void hal_frame_read(hal_rx_frame_t *rx_frame);
void hal_frame_write( uint8_t *write_buffer, uint8_t length );
void hal_sram_read( uint8_t address, uint8_t length, uint8_t *data );
void hal_sram_write( uint8_t address, uint8_t length, uint8_t *data );
/* Number of receive buffers in RAM. */
#ifndef RF230_CONF_RX_BUFFERS
#define RF230_CONF_RX_BUFFERS 1
#endif
#endif
/** @} */