deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Removing trailing whitespaces

Browse source
This commit is contained in:
Rémy Léone 2014-06-19 14:28:13 +02:00
parent ed87b928c5
commit f111058472
33 changed files with 237 additions and 237 deletions
Download patch file Download diff file Expand all files Collapse all files

18
cpu/stm32w108/hal/micro/cortexm3/micro-common.h
View file

@ -56,8 +56,8 @@
/**
* @brief Resets the watchdog timer. This function is pointed
* to by the macro ::halResetWatchdog().
* @warning Be very careful when using this as you can easily get into an
* to by the macro ::halResetWatchdog().
* @warning Be very careful when using this as you can easily get into an
* infinite loop.
*/
void halInternalResetWatchDog( void );
@ -162,13 +162,13 @@ void halInternalSearchForBiasTrim(void);
* hardware peripherals. This function works by simply adding another
* layer on top of halCommonDelayMicroseconds().
*
* @param ms The specified time, in milliseconds.
* @param ms The specified time, in milliseconds.
*/
void halCommonDelayMilliseconds(uint16_t ms);
/** @brief Puts the microcontroller to sleep in a specified mode, allows
* the GPIO wake sources to be determined at runtime. This function
* the GPIO wake sources to be determined at runtime. This function
* requires the GPIO wake sources to be defined at compile time in the board
* file.
*
@ -180,7 +180,7 @@ void halCommonDelayMilliseconds(uint16_t ms);
* the chip from deep sleep. A high bit in the mask will enable waking
* the chip if the corresponding GPIO changes state. bit0 is PA0, bit1 is
* PA1, bit8 is PB0, bit16 is PCO, bit23 is PC7, bits[31:24] are ignored.
*
*
* @sa ::SleepModes
*/
void halSleepWithOptions(SleepModes sleepMode, uint32_t gpioWakeBitMask);
@ -209,12 +209,12 @@ void halSleepWithOptions(SleepModes sleepMode, uint32_t gpioWakeBitMask);
* micro should be placed into ::SLEEPMODE_WAKETIMER. When the function returns,
* this parameter provides the amount of time remaining out of the original
* sleep time request (normally the return value will be 0).
*
*
* @param gpioWakeBitMask A bit mask of the GPIO that are allowed to wake
* the chip from deep sleep. A high bit in the mask will enable waking
* the chip if the corresponding GPIO changes state. bit0 is PA0, bit1 is
* PA1, bit8 is PB0, bit16 is PCO, bit23 is PC7, bits[31:24] are ignored.
*
*
* @return An StStatus value indicating the success or
* failure of the command.
*/
@ -248,7 +248,7 @@ void halInternalSleep(SleepModes sleepMode);
* - [25] = PWRUP_SLEEPTMRCOMPB
* - [24] = PWRUP_SLEEPTMRCOMPA
* - [23:0] = corresponding GPIO activity
*
*
* WakeInfoValid means that ::halSleepWithOptions (::halInternalSleep) has been called
* at least once. Since the power on state clears the wake event info,
* this bit says the sleep code has been called since power on.
@ -260,7 +260,7 @@ void halInternalSleep(SleepModes sleepMode);
* signal is set). The net affect of skipping sleep is the Low Voltage
* domain never goes through a power/reset cycle.
*
* @return The events that caused the last wake from sleep.
* @return The events that caused the last wake from sleep.
*/
uint32_t halGetWakeInfo(void);