nrf52dk: platform support

platform/nrf52dk/contiki-conf.h

@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2015, Nordic Semiconductor
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+/**
+ * \addtogroup nrf52dk
+ * @{
+ *
+ * \addtogroup nrf52dk-contikic-conf Contiki configuration
+ * @{
+ *
+ * \file
+ *  Contiki configuration for the nRF52 DK
+ */
+#ifndef CONTIKI_CONF_H
+#define CONTIKI_CONF_H
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/* Include Project Specific conf */
+#ifdef PROJECT_CONF_H
+#include PROJECT_CONF_H
+#endif /* PROJECT_CONF_H */
+/*---------------------------------------------------------------------------*/
+/* Include platform peripherals configuration */
+#include "platform-conf.h"
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Network Stack Configuration
+ *
+ * @{
+ */
+#ifndef NETSTACK_CONF_NETWORK
+#define NETSTACK_CONF_NETWORK sicslowpan_driver
+#endif /* NETSTACK_CONF_NETWORK */
+
+#ifndef NETSTACK_CONF_MAC
+#define NETSTACK_CONF_MAC     ble_ipsp_mac_driver
+#endif /* NETSTACK_CONF_MAC */
+
+/* 6LoWPAN */
+#define SICSLOWPAN_CONF_MAC_MAX_PAYLOAD         1280
+#define SICSLOWPAN_CONF_COMPRESSION             SICSLOWPAN_COMPRESSION_HC06
+#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD   0     /**< Always compress IPv6 packets. */
+#define SICSLOWPAN_CONF_FRAG                    0     /**< We don't use 6LoWPAN fragmentation as IPSP takes care of that for us.*/
+#define SICSLOWPAN_FRAMER_HDRLEN                0     /**< Use fixed header len rather than framer.length() function */
+
+/* Packet buffer */
+#define PACKETBUF_CONF_SIZE                     1280  /**< Required IPv6 MTU size */
+/** @} */
+
+/**
+ * \name BLE configuration
+ * @{
+ */
+#ifndef DEVICE_NAME
+#define DEVICE_NAME "Contiki nRF52dk"  /**< Device name used in BLE undirected advertisement. */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * \name IPv6 network buffer configuration
+ *
+ * @{
+ */
+/* Don't let contiki-default-conf.h decide if we are an IPv6 build */
+#ifndef NETSTACK_CONF_WITH_IPV6
+#define NETSTACK_CONF_WITH_IPV6              0
+#endif
+
+#if NETSTACK_CONF_WITH_IPV6
+/*---------------------------------------------------------------------------*/
+/* Addresses, Sizes and Interfaces */
+#define LINKADDR_CONF_SIZE                   8
+#define UIP_CONF_LL_802154                   1
+#define UIP_CONF_LLH_LEN                     0
+
+/* The size of the uIP main buffer */
+#ifndef UIP_CONF_BUFFER_SIZE
+#define UIP_CONF_BUFFER_SIZE              1280
+#endif
+
+/* ND and Routing */
+#define UIP_CONF_ROUTER                      0 /**< BLE master role, which allows for routing, isn't supported. */
+#define UIP_CONF_ND6_SEND_NA                 1
+#define UIP_CONF_IP_FORWARD                  0 /**< No packet forwarding. */
+
+#define UIP_CONF_ND6_REACHABLE_TIME     600000
+#define UIP_CONF_ND6_RETRANS_TIMER       10000
+
+#ifndef NBR_TABLE_CONF_MAX_NEIGHBORS
+#define NBR_TABLE_CONF_MAX_NEIGHBORS        20
+#endif
+
+#ifndef UIP_CONF_MAX_ROUTES
+#define UIP_CONF_MAX_ROUTES                 20
+#endif
+
+#ifndef UIP_CONF_TCP
+#define UIP_CONF_TCP                         1
+#endif
+
+#ifndef UIP_CONF_TCP_MSS
+#define UIP_CONF_TCP_MSS                    64
+#endif
+
+#define UIP_CONF_UDP                         1
+#define UIP_CONF_UDP_CHECKSUMS               1
+#define UIP_CONF_ICMP6                       1
+#endif /* NETSTACK_CONF_WITH_IPV6 */
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Generic Configuration directives
+ *
+ * @{
+ */
+#ifndef ENERGEST_CONF_ON
+#define ENERGEST_CONF_ON                     1 /**< Energest Module */
+#endif
+/** @} */
+#endif /* CONTIKI_CONF_H */
+/**
+ * @}
+ * @}
+ */