Adding the avr-rss2 platform based on AtMega256RFR2
This commit is contained in:
Robert Olsson
parent
d3980668ee
commit
ce8e87d60e
91 changed files with 9349 additions and 0 deletions
635
platform/avr-rss2/contiki-main.c
Normal file
635
platform/avr-rss2/contiki-main.c
Normal file
|
|
@ -0,0 +1,635 @@
|
|||
/*
|
||||
* Copyright (c) 2006, Technical University of Munich
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*
|
||||
* Reworked for avr-rss2 platform. Robert Olsson <robert@radio-sensors.com>
|
||||
*/
|
||||
|
||||
#define PRINTF(FORMAT, args ...) printf_P(PSTR(FORMAT),##args)
|
||||
|
||||
#define ANNOUNCE_BOOT 1 /* adds about 600 bytes to program size */
|
||||
#if ANNOUNCE_BOOT
|
||||
#define PRINTA(FORMAT, args ...) printf_P(PSTR(FORMAT),##args)
|
||||
#else
|
||||
#define PRINTA(...)
|
||||
#endif
|
||||
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTD(FORMAT, args ...) printf_P(PSTR(FORMAT),##args)
|
||||
#else
|
||||
#define PRINTD(...)
|
||||
#endif
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/fuse.h>
|
||||
#include <avr/eeprom.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <dev/watchdog.h>
|
||||
|
||||
#include "loader/symbols-def.h"
|
||||
#include "loader/symtab.h"
|
||||
|
||||
#include "params.h"
|
||||
#include "rss2.h"
|
||||
#include "leds.h"
|
||||
#include "i2c.h"
|
||||
#include "radio/rf230bb/rf230bb.h"
|
||||
#include "net/mac/frame802154.h"
|
||||
#include "net/mac/framer-802154.h"
|
||||
#include "net/ipv6/sicslowpan.h"
|
||||
|
||||
#include "contiki.h"
|
||||
#include "contiki-net.h"
|
||||
#include "contiki-lib.h"
|
||||
|
||||
#include "dev/rs232.h"
|
||||
#include "dev/serial-line.h"
|
||||
#include "dev/slip.h"
|
||||
|
||||
#if AVR_WEBSERVER
|
||||
#include "httpd-fs.h"
|
||||
#include "httpd-cgi.h"
|
||||
#endif
|
||||
|
||||
#ifdef COFFEE_FILES
|
||||
#include "cfs/cfs.h"
|
||||
#include "cfs/cfs-coffee.h"
|
||||
#endif
|
||||
|
||||
#if UIP_CONF_ROUTER && 0
|
||||
#include "net/routing/rimeroute.h"
|
||||
#include "net/rime/rime-udp.h"
|
||||
#endif
|
||||
|
||||
#include "net/rime/rime.h"
|
||||
|
||||
/* Track interrupt flow through mac, rdc and radio driver */
|
||||
/* #define DEBUGFLOWSIZE 32 */
|
||||
#if DEBUGFLOWSIZE
|
||||
uint8_t debugflowsize, debugflow[DEBUGFLOWSIZE];
|
||||
#define DEBUGFLOW(c) if(debugflowsize < (DEBUGFLOWSIZE - 1)) debugflow[debugflowsize++] = c
|
||||
#else
|
||||
#define DEBUGFLOW(c)
|
||||
#endif
|
||||
|
||||
/* Get periodic prints from idle loop, from clock seconds or rtimer interrupts */
|
||||
/* Use of rtimer will conflict with other rtimer interrupts such as contikimac radio cycling */
|
||||
/* STAMPS will print ENERGEST outputs if that is enabled. */
|
||||
#define PERIODICPRINTS 1
|
||||
#if PERIODICPRINTS
|
||||
/* #define PINGS 64 */
|
||||
#define ROUTES 600
|
||||
#define STAMPS 60
|
||||
#define STACKMONITOR 1024
|
||||
uint32_t clocktime;
|
||||
#define TESTRTIMER 0
|
||||
#if TESTRTIMER
|
||||
uint8_t rtimerflag = 1;
|
||||
struct rtimer rt;
|
||||
void
|
||||
rtimercycle(void)
|
||||
{
|
||||
rtimerflag = 1;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
uint16_t node_id; /* Can be set by cooja */
|
||||
|
||||
uint16_t ledtimer_red, ledtimer_yellow;
|
||||
uint16_t i2c_probed; /* i2c devices we have probed */
|
||||
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
/*----------------------Configuration of the .elf file---------------------*/
|
||||
#if 1
|
||||
/* The proper way to set the signature is */
|
||||
#include <avr/signature.h>
|
||||
#else
|
||||
/* Older avr-gcc's may not define the needed SIGNATURE bytes. Do it manually if you get an error */
|
||||
typedef struct {const unsigned char B2;
|
||||
const unsigned char B1;
|
||||
const unsigned char B0;
|
||||
} __signature_t;
|
||||
#define SIGNATURE __signature_t __signature __attribute__((section(".signature")))
|
||||
SIGNATURE = {
|
||||
.B2 = 0x01, /* SIGNATURE_2, //ATMEGA128rfa1 */
|
||||
.B1 = 0xA7, /* SIGNATURE_1, //128KB flash */
|
||||
.B0 = 0x1E, /* SIGNATURE_0, //Atmel */
|
||||
};
|
||||
#endif
|
||||
|
||||
#if 1
|
||||
/* JTAG, SPI enabled, Internal RC osc, Boot flash size 4K, 6CK+65msec delay, brownout disabled */
|
||||
FUSES = { .low = 0xe2, .high = 0x99, .extended = 0xff, };
|
||||
#else
|
||||
/* JTAG+SPI, Boot 4096 words @ $F000, Internal oscillator, startup 6 CK +0 ms, Brownout 1.8 volts */
|
||||
FUSES = { .low = 0xC2, .high = 0x99, .extended = 0xfe, };
|
||||
#endif
|
||||
|
||||
uint8_t
|
||||
rng_get_uint8(void)
|
||||
{
|
||||
#if 1
|
||||
/* Upper two RSSI reg bits (RND_VALUE) are random in rf231 */
|
||||
uint8_t j;
|
||||
j = (PHY_RSSI & 0xc0) + ((PHY_RSSI >> 2) & 0x30) + ((PHY_RSSI >> 4) & 0x0c) + ((PHY_RSSI >> 6) & 0x03);
|
||||
#else
|
||||
/* Get a pseudo random number using the ADC */
|
||||
uint8_t i, j;
|
||||
ADCSRA = 1 << ADEN; /* Enable ADC, not free running, interrupt disabled, fastest clock */
|
||||
for(i = 0; i < 4; i++) {
|
||||
ADMUX = 0; /* toggle reference to increase noise */
|
||||
ADMUX = 0x1E; /* Select AREF as reference, measure 1.1 volt bandgap reference. */
|
||||
ADCSRA |= 1 << ADSC; /* Start conversion */
|
||||
while(ADCSRA & (1 << ADSC)) ; /* Wait till done */
|
||||
j = (j << 2) + ADC;
|
||||
}
|
||||
ADCSRA = 0; /* Disable ADC */
|
||||
#endif
|
||||
PRINTD("rng issues %d\n", j);
|
||||
return j;
|
||||
}
|
||||
/*-------------------------Low level initialization------------------------*/
|
||||
/*------Done in a subroutine to keep main routine stack usage small--------*/
|
||||
void
|
||||
initialize(void)
|
||||
{
|
||||
watchdog_init();
|
||||
watchdog_start();
|
||||
leds_init();
|
||||
serial_line_init();
|
||||
|
||||
rs232_init(RS232_PORT_0, USART_BAUD_38400, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
|
||||
rs232_redirect_stdout(RS232_PORT_0);
|
||||
|
||||
#if 0
|
||||
/* Do it my way... */
|
||||
UBRR0L = 25;
|
||||
UBRR0H = 0;
|
||||
UCSR0A = (1 << U2X0); /*Double */
|
||||
#endif
|
||||
|
||||
rs232_set_input(RS232_PORT_0, serial_line_input_byte);
|
||||
|
||||
clock_init();
|
||||
|
||||
if(MCUSR & (1 << PORF)) {
|
||||
PRINTD("Power-on reset.\n");
|
||||
}
|
||||
if(MCUSR & (1 << EXTRF)) {
|
||||
PRINTD("External reset!\n");
|
||||
}
|
||||
if(MCUSR & (1 << BORF)) {
|
||||
PRINTD("Brownout reset!\n");
|
||||
}
|
||||
if(MCUSR & (1 << WDRF)) {
|
||||
PRINTD("Watchdog reset!\n");
|
||||
}
|
||||
if(MCUSR & (1 << JTRF)) {
|
||||
PRINTD("JTAG reset!\n");
|
||||
}
|
||||
|
||||
i2c_init(100000); /* 100 bit/s */
|
||||
|
||||
#if STACKMONITOR
|
||||
/* Simple stack pointer highwater monitor. Checks for magic numbers in the main
|
||||
* loop. In conjuction with PERIODICPRINTS, never-used stack will be printed
|
||||
* every STACKMONITOR seconds.
|
||||
*/
|
||||
{
|
||||
extern uint16_t __bss_end;
|
||||
uint16_t p = (uint16_t)&__bss_end;
|
||||
do {
|
||||
*(uint16_t *)p = 0x4242;
|
||||
p += 10;
|
||||
} while(p < SP - 10); /* don't overwrite our own stack */
|
||||
}
|
||||
#endif
|
||||
|
||||
#define CONF_CALIBRATE_OSCCAL 0
|
||||
#if CONF_CALIBRATE_OSCCAL
|
||||
void calibrate_rc_osc_32k();
|
||||
{
|
||||
extern uint8_t osccal_calibrated;
|
||||
uint8_t i;
|
||||
PRINTD("\nBefore calibration OSCCAL=%x\n", OSCCAL);
|
||||
for(i = 0; i < 10; i++) {
|
||||
calibrate_rc_osc_32k();
|
||||
PRINTD("Calibrated=%x\n", osccal_calibrated);
|
||||
/* #include <util/delay_basic.h> */
|
||||
/* #define delay_us( us ) ( _delay_loop_2(1+(us*F_CPU)/4000000UL) ) */
|
||||
/* delay_us(50000); */
|
||||
}
|
||||
clock_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
PRINTA("\n*******Booting %s*******\n", CONTIKI_VERSION_STRING);
|
||||
|
||||
/* rtimers needed for radio cycling */
|
||||
rtimer_init();
|
||||
|
||||
/* Initialize process subsystem */
|
||||
process_init();
|
||||
|
||||
/* etimers must be started before ctimer_init */
|
||||
process_start(&etimer_process, NULL);
|
||||
ctimer_init();
|
||||
|
||||
/* Start radio and radio receive process */
|
||||
NETSTACK_RADIO.init();
|
||||
|
||||
/* Get a random seed for the 802.15.4 packet sequence number.
|
||||
* Some layers will ignore duplicates found in a history (e.g. Contikimac)
|
||||
* causing the initial packets to be ignored after a short-cycle restart.
|
||||
*/
|
||||
random_init(rng_get_uint8());
|
||||
|
||||
/* Set addresses BEFORE starting tcpip process */
|
||||
|
||||
linkaddr_t addr;
|
||||
|
||||
printf("I2C: ");
|
||||
i2c_probed = i2c_probe();
|
||||
printf("\n");
|
||||
|
||||
if( i2c_probed & I2C_AT24MAC ) {
|
||||
i2c_at24mac_read((char *)&addr.u8, 1);
|
||||
linkaddr_set_node_addr(&addr);
|
||||
}
|
||||
else {
|
||||
char eui64[8];
|
||||
printf("Random EUI64 address generated\n");
|
||||
eui64[0] = 0xfc; /* Atmels OUI */
|
||||
eui64[1] = 0xc2;
|
||||
eui64[2] = 0x3d;
|
||||
eui64[3] = 0;
|
||||
eui64[4] = 0;
|
||||
eui64[5] = 0;
|
||||
eui64[6] = node_id >> 8;
|
||||
eui64[7] = node_id & 0xff;
|
||||
linkaddr_set_node_addr(&eui64);
|
||||
}
|
||||
|
||||
/* memcpy(&uip_lladdr.addr, &addr.u8, sizeof(linkaddr_t)); */
|
||||
|
||||
#if NETSTACK_CONF_WITH_IPV6
|
||||
memcpy(&uip_lladdr.addr, &addr.u8, sizeof(linkaddr_t));
|
||||
#endif
|
||||
|
||||
rf230_set_pan_addr(params_get_panid(), params_get_panaddr(), (uint8_t *)&addr.u8);
|
||||
rf230_set_channel(params_get_channel());
|
||||
rf230_set_txpower(params_get_txpower());
|
||||
|
||||
#if NETSTACK_CONF_WITH_IPV6
|
||||
PRINTA("EUI-64 MAC: %x-%x-%x-%x-%x-%x-%x-%x\n", addr.u8[0], addr.u8[1], addr.u8[2], addr.u8[3], addr.u8[4], addr.u8[5], addr.u8[6], addr.u8[7]);
|
||||
#else
|
||||
PRINTA("MAC address ");
|
||||
uint8_t i;
|
||||
for(i = sizeof(linkaddr_t); i > 0; i--) {
|
||||
PRINTA("%x:", addr.u8[i - 1]);
|
||||
}
|
||||
PRINTA("\n");
|
||||
#endif
|
||||
|
||||
/* Initialize stack protocols */
|
||||
queuebuf_init();
|
||||
NETSTACK_RDC.init();
|
||||
NETSTACK_MAC.init();
|
||||
NETSTACK_NETWORK.init();
|
||||
|
||||
#if ANNOUNCE_BOOT
|
||||
PRINTA("MAC=%s, RDC=%s, NETWORK=%s, channel=%-u, check-rate-Hz=%-u, tx-power=%-u\n", NETSTACK_MAC.name,
|
||||
NETSTACK_RDC.name, NETSTACK_NETWORK.name, rf230_get_channel(),
|
||||
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 : NETSTACK_RDC.channel_check_interval()),
|
||||
rf230_get_txpower());
|
||||
#if UIP_CONF_IPV6_RPL
|
||||
PRINTA("RPL Enabled\n");
|
||||
#endif
|
||||
#if UIP_CONF_ROUTER
|
||||
PRINTA("Routing Enabled\n");
|
||||
#endif
|
||||
|
||||
#endif /* ANNOUNCE_BOOT */
|
||||
|
||||
#if NETSTACK_CONF_WITH_IPV6 || NETSTACK_CONF_WITH_IPV4
|
||||
process_start(&tcpip_process, NULL);
|
||||
#endif
|
||||
|
||||
/* Autostart other processes */
|
||||
autostart_start(autostart_processes);
|
||||
|
||||
/*---If using coffee file system create initial web content if necessary---*/
|
||||
#if COFFEE_FILES
|
||||
int fa = cfs_open("/index.html", CFS_READ);
|
||||
if(fa < 0) { /* Make some default web content */
|
||||
PRINTA("No index.html file found, creating upload.html!\n");
|
||||
PRINTA("Formatting FLASH file system for coffee...");
|
||||
cfs_coffee_format();
|
||||
PRINTA("Done!\n");
|
||||
fa = cfs_open("/index.html", CFS_WRITE);
|
||||
int r = cfs_write(fa, &"It works!", 9);
|
||||
if(r < 0) {
|
||||
PRINTA("Can''t create /index.html!\n");
|
||||
}
|
||||
cfs_close(fa);
|
||||
/* fa = cfs_open("upload.html"), CFW_WRITE); */
|
||||
/* <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html> */
|
||||
}
|
||||
#endif /* COFFEE_FILES */
|
||||
|
||||
/* Add addresses for testing */
|
||||
#if 0
|
||||
{
|
||||
uip_ip6addr_t ipaddr;
|
||||
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
|
||||
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
|
||||
/* uip_ds6_prefix_add(&ipaddr,64,0); */
|
||||
}
|
||||
#endif
|
||||
/*--------------------------Announce the configuration---------------------*/
|
||||
#if ANNOUNCE_BOOT
|
||||
#if AVR_WEBSERVER
|
||||
{ uint8_t i;
|
||||
char buf[80];
|
||||
unsigned int size;
|
||||
|
||||
for(i = 0; i < UIP_DS6_ADDR_NB; i++) {
|
||||
if(uip_ds6_if.addr_list[i].isused) {
|
||||
httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr, buf);
|
||||
PRINTA("IPv6 Address: %s\n", buf);
|
||||
}
|
||||
}
|
||||
cli();
|
||||
eeprom_read_block(buf, eemem_server_name, sizeof(eemem_server_name));
|
||||
sei();
|
||||
buf[sizeof(eemem_server_name)] = 0;
|
||||
PRINTA("%s", buf);
|
||||
cli();
|
||||
eeprom_read_block(buf, eemem_domain_name, sizeof(eemem_domain_name));
|
||||
sei();
|
||||
buf[sizeof(eemem_domain_name)] = 0;
|
||||
size = httpd_fs_get_size();
|
||||
#ifndef COFFEE_FILES
|
||||
PRINTA(".%s online with fixed %u byte web content\n", buf, size);
|
||||
#elif COFFEE_FILES == 1
|
||||
PRINTA(".%s online with static %u byte EEPROM file system\n", buf, size);
|
||||
#elif COFFEE_FILES == 2
|
||||
PRINTA(".%s online with dynamic %u KB EEPROM file system\n", buf, size >> 10);
|
||||
#elif COFFEE_FILES == 3
|
||||
PRINTA(".%s online with static %u byte program memory file system\n", buf, size);
|
||||
#elif COFFEE_FILES == 4
|
||||
PRINTA(".%s online with dynamic %u KB program memory file system\n", buf, size >> 10);
|
||||
#endif /* COFFEE_FILES */
|
||||
}
|
||||
#else
|
||||
PRINTA("Online\n");
|
||||
#endif
|
||||
#endif /* ANNOUNCE_BOOT */
|
||||
|
||||
ledtimer_red = 1000;
|
||||
leds_on(LEDS_RED);
|
||||
}
|
||||
|
||||
|
||||
#if ROUTES && NETSTACK_CONF_WITH_IPV6
|
||||
static void
|
||||
ipaddr_add(const uip_ipaddr_t *addr)
|
||||
{
|
||||
uint16_t a;
|
||||
int8_t i, f;
|
||||
for(i = 0, f = 0; i < sizeof(uip_ipaddr_t); i += 2) {
|
||||
a = (addr->u8[i] << 8) + addr->u8[i + 1];
|
||||
if(a == 0 && f >= 0) {
|
||||
if(f++ == 0) {
|
||||
PRINTF("::");
|
||||
}
|
||||
} else {
|
||||
if(f > 0) {
|
||||
f = -1;
|
||||
} else if(i > 0) {
|
||||
PRINTF(":");
|
||||
}
|
||||
PRINTF("%x", a);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
/*-------------------------------------------------------------------------*/
|
||||
/*------------------------- Main Scheduler loop----------------------------*/
|
||||
/*-------------------------------------------------------------------------*/
|
||||
int
|
||||
main(void)
|
||||
{
|
||||
#if NETSTACK_CONF_WITH_IPV6
|
||||
uip_ds6_nbr_t *nbr;
|
||||
#endif /* NETSTACK_CONF_WITH_IPV6 */
|
||||
initialize();
|
||||
|
||||
while(1) {
|
||||
process_run();
|
||||
watchdog_periodic();
|
||||
|
||||
/* Turn off LED's */
|
||||
if(ledtimer_red) {
|
||||
if(--ledtimer_red == 0) {
|
||||
leds_off(LEDS_RED);
|
||||
}
|
||||
}
|
||||
if(ledtimer_yellow) {
|
||||
if(--ledtimer_yellow == 0) {
|
||||
leds_off(LEDS_YELLOW);
|
||||
}
|
||||
}
|
||||
leds_off(LEDS_RED);
|
||||
leds_off(LEDS_YELLOW);
|
||||
|
||||
#if 0
|
||||
/* Various entry points for debugging in the AVR Studio simulator.
|
||||
* Set as next statement and step into the routine.
|
||||
*/
|
||||
NETSTACK_RADIO.send(packetbuf_hdrptr(), 42);
|
||||
process_poll(&rf230_process);
|
||||
packetbuf_clear();
|
||||
len = rf230_read(packetbuf_dataptr(), PACKETBUF_SIZE);
|
||||
packetbuf_set_datalen(42);
|
||||
NETSTACK_RDC.input();
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/* Clock.c can trigger a periodic PLL calibration in the RF230BB driver.
|
||||
* This can show when that happens.
|
||||
*/
|
||||
extern uint8_t rf230_calibrated;
|
||||
if(rf230_calibrated) {
|
||||
PRINTD("\nRF230 calibrated!\n");
|
||||
rf230_calibrated = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Set DEBUGFLOWSIZE in contiki-conf.h to track path through MAC, RDC, and RADIO */
|
||||
#if DEBUGFLOWSIZE
|
||||
if(debugflowsize) {
|
||||
debugflow[debugflowsize] = 0;
|
||||
PRINTF("%s", debugflow);
|
||||
debugflowsize = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if PERIODICPRINTS
|
||||
#if TESTRTIMER
|
||||
/* Timeout can be increased up to 8 seconds maximum.
|
||||
* A one second cycle is convenient for triggering the various debug printouts.
|
||||
* The triggers are staggered to avoid printing everything at once.
|
||||
*/
|
||||
if(rtimerflag) {
|
||||
rtimer_set(&rt, RTIMER_NOW() + RTIMER_ARCH_SECOND * 1UL, 1, (void *)rtimercycle, NULL);
|
||||
rtimerflag = 0;
|
||||
#else
|
||||
if(clocktime != clock_seconds()) {
|
||||
clocktime = clock_seconds();
|
||||
#endif
|
||||
|
||||
#if STAMPS
|
||||
if((clocktime % STAMPS) == 0) {
|
||||
#if ENERGEST_CONF_ON
|
||||
#include "lib/print-stats.h"
|
||||
print_stats();
|
||||
#elif RADIOSTATS
|
||||
extern volatile unsigned long radioontime;
|
||||
PRINTF("%u(%u)s\n", clocktime, radioontime);
|
||||
#else
|
||||
PRINTF("%us\n", clocktime);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
#if TESTRTIMER
|
||||
clocktime += 1;
|
||||
#endif
|
||||
|
||||
#if PINGS && NETSTACK_CONF_WITH_IPV6
|
||||
extern void raven_ping6(void);
|
||||
if((clocktime % PINGS) == 1) {
|
||||
PRINTF("**Ping\n");
|
||||
raven_ping6();
|
||||
}
|
||||
#endif
|
||||
|
||||
#if ROUTES && NETSTACK_CONF_WITH_IPV6
|
||||
if((clocktime % ROUTES) == 2) {
|
||||
|
||||
extern uip_ds6_netif_t uip_ds6_if;
|
||||
|
||||
uint8_t i, j;
|
||||
PRINTF("\nAddresses [%u max]\n", UIP_DS6_ADDR_NB);
|
||||
for(i = 0; i < UIP_DS6_ADDR_NB; i++) {
|
||||
if(uip_ds6_if.addr_list[i].isused) {
|
||||
ipaddr_add(&uip_ds6_if.addr_list[i].ipaddr);
|
||||
PRINTF("\n");
|
||||
}
|
||||
}
|
||||
PRINTF("\nNeighbors [%u max]\n", NBR_TABLE_MAX_NEIGHBORS);
|
||||
j = 0;
|
||||
for(nbr = nbr_table_head(ds6_neighbors);
|
||||
nbr != NULL;
|
||||
nbr = nbr_table_next(ds6_neighbors, nbr)) {
|
||||
ipaddr_add(&nbr->ipaddr);
|
||||
PRINTF("\n");
|
||||
j++;
|
||||
}
|
||||
if(!j) {
|
||||
PRINTF(" <none>");
|
||||
}
|
||||
PRINTF("\nRoutes [%u max]\n", UIP_DS6_ROUTE_NB);
|
||||
{
|
||||
uip_ds6_route_t *r;
|
||||
j = 0;
|
||||
for(r = uip_ds6_route_head();
|
||||
r != NULL;
|
||||
r = uip_ds6_route_next(r)) {
|
||||
ipaddr_add(&r->ipaddr);
|
||||
PRINTF("/%u (via ", r->length);
|
||||
ipaddr_add(uip_ds6_route_nexthop(r));
|
||||
PRINTF(") %lus\n", r->state.lifetime);
|
||||
j++;
|
||||
}
|
||||
}
|
||||
if(!j) {
|
||||
PRINTF(" <none>");
|
||||
}
|
||||
PRINTF("\n---------\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
#if STACKMONITOR
|
||||
if((clocktime % STACKMONITOR) == 3) {
|
||||
extern uint16_t __bss_end;
|
||||
uint16_t p = (uint16_t)&__bss_end;
|
||||
do {
|
||||
if(*(uint16_t *)p != 0x4242) {
|
||||
PRINTF("Never-used stack > %d bytes\n", p - (uint16_t)&__bss_end);
|
||||
break;
|
||||
}
|
||||
p += 10;
|
||||
} while(p < RAMEND - 10);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif /* PERIODICPRINTS */
|
||||
|
||||
#if RF230BB && 0
|
||||
extern uint8_t rf230processflag;
|
||||
if(rf230processflag) {
|
||||
PRINTF("rf230p%d", rf230processflag);
|
||||
rf230processflag = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if RF230BB && 0
|
||||
extern uint8_t rf230_interrupt_flag;
|
||||
if(rf230_interrupt_flag) {
|
||||
/* if (rf230_interrupt_flag!=11) { */
|
||||
PRINTF("**RI%u", rf230_interrupt_flag);
|
||||
/* } */
|
||||
rf230_interrupt_flag = 0;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
void
|
||||
log_message(char *m1, char *m2)
|
||||
{
|
||||
PRINTF("%s%s\n", m1, m2);
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue