add pwm support
This commit is contained in:
Mariano Alvira
parent
c967150038
commit
c7dc2a45a4
4 changed files with 409 additions and 1 deletions
67
lib/include/pwm.h
Normal file
67
lib/include/pwm.h
Normal file
|
|
@ -0,0 +1,67 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
||||||
|
* to the MC1322x project (http://mc1322x.devl.org)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
||||||
|
* for details.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef PWM_H
|
||||||
|
#define PWM_H
|
||||||
|
|
||||||
|
/* Initialize PWM output.
|
||||||
|
timer_num = 0, 1, 2, 3
|
||||||
|
rate = desired rate in Hz,
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
enable_timer = whether to actually run the timer, versus just configuring it
|
||||||
|
Returns actual PWM rate. */
|
||||||
|
uint32_t pwm_init_ex(int timer_num, uint32_t rate, uint32_t duty, int enable_timer);
|
||||||
|
|
||||||
|
/* Initialize PWM output, helper macros
|
||||||
|
timer = TMR0, TMR1, TMR2, TMR2
|
||||||
|
rate = desired rate in Hz,
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
Returns actual PWM rate. */
|
||||||
|
#define pwm_init(timer,rate,duty) pwm_init_ex(TMR_NUM(timer), rate, duty, 1)
|
||||||
|
#define pwm_init_stopped(timer,rate,duty) pwm_init_ex(TMR_NUM(timer), rate, duty, 0)
|
||||||
|
|
||||||
|
/* Change duty cycle. Safe to call at any time.
|
||||||
|
timer_num = 0, 1, 2, 3
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
*/
|
||||||
|
void pwm_duty_ex(int timer_num, uint32_t duty);
|
||||||
|
|
||||||
|
/* Change duty cycle. Safe to call at any time.
|
||||||
|
timer = TMR0, TMR1, TMR2, TMR2
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
*/
|
||||||
|
#define pwm_duty(timer,duty) pwm_duty_ex(TMR_NUM(timer), duty)
|
||||||
|
|
||||||
|
#endif
|
||||||
254
lib/pwm.c
Normal file
254
lib/pwm.c
Normal file
|
|
@ -0,0 +1,254 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
||||||
|
* to the MC1322x project (http://mc1322x.devl.org)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
||||||
|
* for details.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <mc1322x.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include "pwm.h"
|
||||||
|
|
||||||
|
static struct {
|
||||||
|
uint32_t period;
|
||||||
|
uint32_t guard;
|
||||||
|
uint32_t pad_forced;
|
||||||
|
} pwm_info[4];
|
||||||
|
|
||||||
|
static inline void pad_set_output(int timer_num) { // set to output (when in GPIO mode)
|
||||||
|
switch (timer_num) {
|
||||||
|
case 0: GPIO->DATA_SEL.TMR0_PIN = 1; GPIO->PAD_DIR.TMR0_PIN = 1; break;
|
||||||
|
case 1: GPIO->DATA_SEL.TMR1_PIN = 1; GPIO->PAD_DIR.TMR1_PIN = 1; break;
|
||||||
|
case 2: GPIO->DATA_SEL.TMR2_PIN = 1; GPIO->PAD_DIR.TMR2_PIN = 1; break;
|
||||||
|
case 3: GPIO->DATA_SEL.TMR3_PIN = 1; GPIO->PAD_DIR.TMR3_PIN = 1; break;
|
||||||
|
default: break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void pad_set_zero(int timer_num) { // set to zero in GPIO mode
|
||||||
|
switch (timer_num) {
|
||||||
|
case 0: GPIO->DATA_RESET.TMR0_PIN = 1; GPIO->FUNC_SEL.TMR0_PIN = 0; break;
|
||||||
|
case 1: GPIO->DATA_RESET.TMR1_PIN = 1; GPIO->FUNC_SEL.TMR1_PIN = 0; break;
|
||||||
|
case 2: GPIO->DATA_RESET.TMR2_PIN = 1; GPIO->FUNC_SEL.TMR2_PIN = 0; break;
|
||||||
|
case 3: GPIO->DATA_RESET.TMR3_PIN = 1; GPIO->FUNC_SEL.TMR3_PIN = 0; break;
|
||||||
|
default: break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void pad_set_one(int timer_num) { // set to one in GPIO mode
|
||||||
|
switch (timer_num) {
|
||||||
|
case 0: GPIO->DATA_SET.TMR0_PIN = 1; GPIO->FUNC_SEL.TMR0_PIN = 0; break;
|
||||||
|
case 1: GPIO->DATA_SET.TMR1_PIN = 1; GPIO->FUNC_SEL.TMR1_PIN = 0; break;
|
||||||
|
case 2: GPIO->DATA_SET.TMR2_PIN = 1; GPIO->FUNC_SEL.TMR2_PIN = 0; break;
|
||||||
|
case 3: GPIO->DATA_SET.TMR3_PIN = 1; GPIO->FUNC_SEL.TMR3_PIN = 0; break;
|
||||||
|
default: break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void pad_set_normal(int timer_num) { // set to TMR OFLAG output
|
||||||
|
switch (timer_num) {
|
||||||
|
case 0: GPIO->FUNC_SEL.TMR0_PIN = 1; break;
|
||||||
|
case 1: GPIO->FUNC_SEL.TMR1_PIN = 1; break;
|
||||||
|
case 2: GPIO->FUNC_SEL.TMR2_PIN = 1; break;
|
||||||
|
case 3: GPIO->FUNC_SEL.TMR3_PIN = 1; break;
|
||||||
|
default: break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initialize PWM output.
|
||||||
|
timer_num = 0, 1, 2, 3
|
||||||
|
rate = desired rate in Hz,
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
enable_timer = whether to actually run the timer, versus just configuring it
|
||||||
|
Returns actual PWM rate. */
|
||||||
|
uint32_t pwm_init_ex(int timer_num, uint32_t rate, uint32_t duty, int enable_timer)
|
||||||
|
{
|
||||||
|
uint32_t actual_rate;
|
||||||
|
volatile struct TMR_struct *timer = TMR_ADDR(timer_num);
|
||||||
|
int log_divisor = 0;
|
||||||
|
uint32_t period, guard;
|
||||||
|
|
||||||
|
/* Turn timer off */
|
||||||
|
TMR0->ENBL &= ~(1 << timer_num);
|
||||||
|
|
||||||
|
/* Calculate optimal rate */
|
||||||
|
for (log_divisor = 0; log_divisor < 8; log_divisor++)
|
||||||
|
{
|
||||||
|
int denom = (rate * (1 << log_divisor));
|
||||||
|
period = (REF_OSC + denom/2) / denom;
|
||||||
|
if (period <= 65535)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
if (log_divisor >= 8)
|
||||||
|
{
|
||||||
|
period = 65535;
|
||||||
|
log_divisor = 7;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Guard value (for safely changing duty cycle) should be
|
||||||
|
about 32 CPU clocks. Calculate how many timer counts that
|
||||||
|
is, based on prescaler */
|
||||||
|
guard = 32 >> log_divisor;
|
||||||
|
if (guard < 2) guard = 2;
|
||||||
|
|
||||||
|
/* Period should be about 50% longer than guard */
|
||||||
|
if (period < ((guard * 3) / 2))
|
||||||
|
period = guard + 4;
|
||||||
|
|
||||||
|
/* Store period, guard, actual rate */
|
||||||
|
pwm_info[timer_num].period = period;
|
||||||
|
pwm_info[timer_num].guard = guard;
|
||||||
|
actual_rate = REF_OSC / (period * (1 << log_divisor));
|
||||||
|
|
||||||
|
/* Set up timer */
|
||||||
|
pwm_duty_ex(timer_num, duty); // sets CMPLD1, LOAD
|
||||||
|
timer->SCTRLbits = (struct TMR_SCTRL) {
|
||||||
|
.OEN = 1, // drive OFLAG
|
||||||
|
};
|
||||||
|
timer->CSCTRLbits = (struct TMR_CSCTRL) {
|
||||||
|
.CL1 = 0x01, // Reload COMP1 when COMP1 matches
|
||||||
|
};
|
||||||
|
timer->COMP1 = timer->CMPLD1;
|
||||||
|
timer->CNTR = timer->LOAD;
|
||||||
|
timer->CTRLbits = (struct TMR_CTRL) {
|
||||||
|
.COUNT_MODE = 1, // Count rising edge of primary source
|
||||||
|
.PRIMARY_CNT_SOURCE = 8 + log_divisor, // Peripheral clock divided by (divisor)
|
||||||
|
.LENGTH = 1, // At compare, reset to LOAD
|
||||||
|
.OUTPUT_MODE = 6, // Set on COMP1, clear on rollover
|
||||||
|
};
|
||||||
|
|
||||||
|
pad_set_output(timer_num);
|
||||||
|
pad_set_normal(timer_num);
|
||||||
|
|
||||||
|
if (enable_timer) {
|
||||||
|
TMR0->ENBL |= (1 << timer_num);
|
||||||
|
}
|
||||||
|
|
||||||
|
// printf("pwm timer %d, addr %p, requested rate %d, actual rate: %d, period %d, guard %d, divisor %d\r\n",
|
||||||
|
// timer_num, timer, rate, actual_rate, period, guard, 1 << log_divisor);
|
||||||
|
|
||||||
|
return actual_rate;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Change duty cycle. Safe to call at any time.
|
||||||
|
timer_num = 0, 1, 2, 3
|
||||||
|
duty = desired duty cycle. 0=always off, 65536=always on.
|
||||||
|
*/
|
||||||
|
void pwm_duty_ex(int timer_num, uint32_t duty)
|
||||||
|
{
|
||||||
|
uint16_t comp1, load;
|
||||||
|
volatile struct TMR_struct *timer = TMR_ADDR(timer_num);
|
||||||
|
uint32_t period = pwm_info[timer_num].period;
|
||||||
|
|
||||||
|
duty = (duty * period + 32767) / 65536;
|
||||||
|
|
||||||
|
/* We don't use the "variable PWM" mode described in the datasheet because
|
||||||
|
there's no way to reliably change the duty cycle without potentially
|
||||||
|
changing the period for one cycle, which will cause phase drifts.
|
||||||
|
|
||||||
|
Instead, we use the "Set on compare, clear on rollover" output mode:
|
||||||
|
|
||||||
|
waveform: |_________| |----------|
|
||||||
|
counter: 0 COMP1 LOAD 65535
|
||||||
|
|
||||||
|
The low portion of the wave is COMP1 cycles long. The
|
||||||
|
compare changes the counter to LOAD, and so the high
|
||||||
|
portion is (65536 - LOAD) cycles long.
|
||||||
|
|
||||||
|
Now, we just have to make sure we're not about to hit COMP1
|
||||||
|
before we change LOAD and COMPLD1. If (COMP1 - CNTR) is less
|
||||||
|
than GUARD cycles, we wait for it to reload before changing.
|
||||||
|
*/
|
||||||
|
|
||||||
|
if (duty == 0) {
|
||||||
|
pad_set_zero(timer_num);
|
||||||
|
pwm_info[timer_num].pad_forced = 1;
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (duty >= period) {
|
||||||
|
pad_set_one(timer_num);
|
||||||
|
pwm_info[timer_num].pad_forced = 1;
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (pwm_info[timer_num].pad_forced) {
|
||||||
|
pad_set_normal(timer_num);
|
||||||
|
pwm_info[timer_num].pad_forced = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
comp1 = (period - duty) - 1;
|
||||||
|
load = (65536 - duty);
|
||||||
|
|
||||||
|
/* Disable interrupts */
|
||||||
|
uint32_t old_INTCNTL = ITC->INTCNTL;
|
||||||
|
ITC->INTCNTL = 0;
|
||||||
|
|
||||||
|
if (TMR0->ENBL & (1 << timer_num))
|
||||||
|
{
|
||||||
|
/* Timer is enabled, so use the careful approach.
|
||||||
|
Implemented in ASM so we can be sure of the cycle
|
||||||
|
count */
|
||||||
|
uint32_t tmp1, tmp2;
|
||||||
|
asm volatile (//".arm \n\t"
|
||||||
|
"1: \n\t"
|
||||||
|
"ldrh %[tmp1], %[comp] \n\t" // load COMP1
|
||||||
|
"ldrh %[tmp2], %[count] \n\t" // load CNTR
|
||||||
|
"sub %[tmp1], %[tmp1], %[tmp2] \n\t" // subtract
|
||||||
|
"lsl %[tmp1], %[tmp1], #16 \n\t" // clear high bits
|
||||||
|
"lsr %[tmp1], %[tmp1], #16 \n\t"
|
||||||
|
"cmp %[tmp1], %[guard] \n\t" // compare to GUARD
|
||||||
|
"bls 1b \n\t" // if less, goto 1
|
||||||
|
|
||||||
|
"strh %[ld1], %[cmpld] \n\t" // store CMPLD1
|
||||||
|
"strh %[ld2], %[load] \n\t" // store LOAD
|
||||||
|
: /* out */
|
||||||
|
[tmp1] "=&l" (tmp1),
|
||||||
|
[tmp2] "=&l" (tmp2),
|
||||||
|
[cmpld] "=m" (timer->CMPLD1),
|
||||||
|
[load] "=m" (timer->LOAD)
|
||||||
|
: /* in */
|
||||||
|
[comp] "m" (timer->COMP1),
|
||||||
|
[count] "m" (timer->CNTR),
|
||||||
|
[ld1] "l" (comp1),
|
||||||
|
[ld2] "l" (load),
|
||||||
|
[guard] "l" (pwm_info[timer_num].guard)
|
||||||
|
: "memory"
|
||||||
|
);
|
||||||
|
} else {
|
||||||
|
/* Just set it directly, timer isn't running */
|
||||||
|
timer->CMPLD1 = comp1;
|
||||||
|
timer->LOAD = load;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Re-enable interrupts */
|
||||||
|
ITC->INTCNTL = old_INTCNTL;
|
||||||
|
}
|
||||||
|
|
@ -11,7 +11,9 @@ TARGETS := blink-red blink-green blink-blue blink-white blink-allio \
|
||||||
tmr tmr-ints \
|
tmr tmr-ints \
|
||||||
sleep \
|
sleep \
|
||||||
printf \
|
printf \
|
||||||
asm
|
asm \
|
||||||
|
adc \
|
||||||
|
pwm
|
||||||
|
|
||||||
# these targets are built with space reserved for variables needed by ROM services
|
# these targets are built with space reserved for variables needed by ROM services
|
||||||
# this space is initialized with a rom call to rom_data_init
|
# this space is initialized with a rom call to rom_data_init
|
||||||
|
|
|
||||||
85
tests/pwm.c
Normal file
85
tests/pwm.c
Normal file
|
|
@ -0,0 +1,85 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2010, Mariano Alvira <mar@devl.org> and other contributors
|
||||||
|
* to the MC1322x project (http://mc1322x.devl.org)
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
* This file is part of libmc1322x: see http://mc1322x.devl.org
|
||||||
|
* for details.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <mc1322x.h>
|
||||||
|
#include <board.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
|
||||||
|
#include "config.h"
|
||||||
|
#include "pwm.h"
|
||||||
|
#include "rtc.h"
|
||||||
|
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
int x = 32768;
|
||||||
|
|
||||||
|
trim_xtal();
|
||||||
|
uart1_init(INC,MOD,SAMP);
|
||||||
|
rtc_init();
|
||||||
|
|
||||||
|
printf("pwm test\r\n");
|
||||||
|
pwm_init_stopped(TMR0, 12000000, x);
|
||||||
|
pwm_init_stopped(TMR1, 12000000, x);
|
||||||
|
TMR0->ENBL |= TMR_ENABLE_BIT(TMR0) | TMR_ENABLE_BIT(TMR1);
|
||||||
|
|
||||||
|
for(;;) {
|
||||||
|
printf("duty %d = %d%%\r\n", x, ((x * 100 + 32768) / 65536));
|
||||||
|
switch(uart1_getc()) {
|
||||||
|
case '[': x -= 1; break;
|
||||||
|
case ']': x += 1; break;
|
||||||
|
case '-': x -= 32; break;
|
||||||
|
case '=': x += 32; break;
|
||||||
|
case '_': x -= 512; break;
|
||||||
|
case '+': x += 512; break;
|
||||||
|
|
||||||
|
case '`': x = 65535 * 0/10; break;
|
||||||
|
case '1': x = 65535 * 1/10; break;
|
||||||
|
case '2': x = 65535 * 2/10; break;
|
||||||
|
case '3': x = 65535 * 3/10; break;
|
||||||
|
case '4': x = 65535 * 4/10; break;
|
||||||
|
case '5': x = 65535 * 5/10; break;
|
||||||
|
case '6': x = 65535 * 6/10; break;
|
||||||
|
case '7': x = 65535 * 7/10; break;
|
||||||
|
case '8': x = 65535 * 8/10; break;
|
||||||
|
case '9': x = 65535 * 9/10; break;
|
||||||
|
case '0': x = 65535 * 10/10; break;
|
||||||
|
|
||||||
|
}
|
||||||
|
x &= 65535;
|
||||||
|
pwm_duty(TMR0, x);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in a new issue