initial upload

examples/osd/lgb-train/Grove_LED_Bar-master/LP examples/WalkMultiple/WalkMultiple.ino

@@ -0,0 +1,39 @@
+/*
+Grove LED Bar - Walk Multiple Example
+This example will show you how to use setBits() function of this library.
+Set any combination of LEDs using 10 bits.
+This example walks through all 1024 (2^10) possible combinations on two LED Bars.
+
+Ported for MSP-EXP430F5529, TM4c123 (Tiva C) LaunchPad By Cameron P. LaFollette
+*/
+
+#include <Grove_LED_Bar.h>
+
+// Arduino Clock pin, Data pin, Orientation 
+// Grove_LED_Bar bar1(9, 8, 0); // Clock pin, Data pin, Orientation
+//Grove_LED_Bar bar2(7, 6, 1);  // Clock pin, Data pin, Orientation
+
+// LaunchPad Clock pin, Data pin, Orientation
+Grove_LED_Bar bar1(37, 38, 0);  // Clock pin, Data pin, Orientation
+Grove_LED_Bar bar2(35, 36, 0);  // Clock pin, Data pin, Orientation
+
+
+
+void setup()
+{
+  // nothing to initialize
+  bar1.begin();
+  bar2.begin();
+}
+
+void loop()
+{
+  // 0 = 0x0 = all 10 LEDs turned off
+  // 1023 = 0x3FF = all 10 LEDs lit up
+  for (int i = 0; i <= 1023; i++)
+  {
+    bar1.setBits(i);
+    bar2.setBits(i);
+    delay(50);
+  }
+}