initial upload

examples/osd/lgb-train/Grove_LED_Bar-master/LP examples/Reverse/Reverse.ino

@@ -0,0 +1,65 @@
+/*
+Grove LED Bar - Reverse Example
+This example will show you how to use setGreenToRed() function of this library.
+The function is used to reverse the orientation of the LED Bar.
+Ported for MSP-EXP430F5529, TM4c123 (Tiva C) LaunchPad By Cameron P. LaFollette
+*/
+
+#include <Grove_LED_Bar.h>
+
+// The 3rd parameter sets the initial orientation
+// 0 = green to red, 1 = red to green
+// You can always change it at runtime with the setGreenToRed() function
+
+// Arduino Clock pin, Data pin, Orientation 
+// Grove_LED_Bar bar(9, 8, 0); // Clock pin, Data pin, Orientation
+
+// LaunchPad Clock pin, Data pin, Orientation
+Grove_LED_Bar bar(35, 36, 0);  // Clock pin, Data pin, Orientation
+
+void setup()
+{
+  // nothing to initialize
+  bar.begin();
+}
+
+void loop()
+{
+  // Start as red to green
+  // Walk through the 10 levels
+  for (int i = 0; i <= 10; i++)
+  {
+    bar.setLevel(i);
+    delay(200);
+  }
+  bar.setLevel(0);
+
+  // Swich to green to red
+  bar.setGreenToRed(1);
+
+  // Walk through the 10 levels
+  for (int i = 0; i <= 10; i++)
+  {
+    bar.setLevel(i);
+    delay(200);
+  }
+  bar.setLevel(0);
+
+  // Switch back to red to green
+  bar.setGreenToRed(0);
+  delay(200);
+
+  // Walk through the levels
+  // Each reverse keeps the previously set level
+  for (int i = 1; i <= 10; i++)
+  {
+    bar.setLevel(i);
+    delay(500);
+
+    bar.setGreenToRed(1);
+    delay(500);
+
+    bar.setGreenToRed(0);
+  }
+  bar.setLevel(0);
+}