Merge pull request #945 from Tom435/master

Atmel AT86RF230 in avr-rcb: added missing macros and initialisations
This commit is contained in:
Nicolas Tsiftes 2015-02-03 00:33:01 +01:00
commit b8e2d33e06
3 changed files with 42 additions and 19 deletions

View file

@ -5,10 +5,14 @@ CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
CONTIKI_TARGET_SOURCEFILES += rs232.c cfs-eeprom.c eeprom.c random.c \
mmem.c contiki-rcb-main.c
MODULES += core/net core/net/mac core/net/mac/sicslowmac core/net/mac/contikimac \
core/net/mac/cxmac core/net/rime core/net/ipv4 core/net/ip \
core/net/ipv6 core/net/rpl core/net/llsec
CONTIKIAVR=$(CONTIKI)/cpu/avr
CONTIKIBOARD=.
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAUTO_CRC_PADDING=2
CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAUTO_CRC_PADDING=2 -DNETSTACK_CONF_WITH_RIME=1 -DNETSTACK_CONF_WITH_IPV6=1
MCU=atmega1281
AVRDUDE_PROGRAMMER=jtag2

View file

@ -92,11 +92,24 @@ void clock_adjust_ticks(clock_time_t howmany);
#define CCIF
#define CLIF
//#define NETSTACK_CONF_WITH_IPV6 1 //Let makefile determine this so ipv4 hello-world will compile
#define LINKADDR_CONF_SIZE 8
#define PACKETBUF_CONF_HDR_SIZE 0
#define PACKETBUF_CONF_HDR_SIZE 48 /* Choose a buffersize != 0 for the messages which should be sended over the wireless interface */
/* Uncomment this lines to activate the specific drivers */
//#define NETSTACK_CONF_NETWORK rime_driver
//#define NETSTACK_CONF_MAC nullmac_driver
//#define NETSTACK_CONF_RDC sicslowmac_driver
//#define NETSTACK_CONF_FRAMER framer_802154 /* Framer for 802.15.4 Medium Access Control */
#define NETSTACK_CONF_RADIO rf230_driver /* Select the wireless driver, otherwise contiki would operate with the "nulldriver" which does nothing */
#define RF230_CONF_AUTOACK 1
#define CXMAC_CONF_ANNOUNCEMENTS 10
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
/* 211 bytes per queue buffer. Burst mode will need 15 for a 1280 byte MTU */
#define QUEUEBUF_CONF_NUM 15
/* 54 bytes per queue ref buffer */
#define QUEUEBUF_CONF_REF_NUM 2
/* 0 for IPv6, or 1 for HC1, 2 for HC01 */
#define SICSLOWPAN_CONF_COMPRESSION_IPV6 0
#define SICSLOWPAN_CONF_COMPRESSION_HC1 1
@ -131,11 +144,9 @@ void clock_adjust_ticks(clock_time_t howmany);
#define UIP_CONF_UDP 1
#define UIP_CONF_UDP_CHECKSUMS 1
#define UIP_CONF_TCP 0
#define UIP_CONF_TCP 1
#define UIP_CONF_TCP_SPLIT 0
/* These names are deprecated, use C99 names. */
/*typedef unsigned char u8_t;
typedef unsigned short u16_t;

View file

@ -109,17 +109,18 @@ init_lowlevel(void)
rs232_redirect_stdout(RS232_PORT_1);
DDRE |= LED1 | LED2 | LED3;
ctimer_init();
}
static struct etimer et;
PROCESS_THREAD(rcb_leds, ev, data)
{
uint8_t error;
PROCESS_BEGIN();
if((error = icmp6_new(NULL)) == 0) {
while(1) {
PROCESS_YIELD();
@ -134,7 +135,6 @@ PROCESS_THREAD(rcb_leds, ev, data)
LEDOff(LED2);
}
}
}
PROCESS_END();
}
@ -142,14 +142,10 @@ PROCESS_THREAD(rcb_leds, ev, data)
int
main(void)
{
//calibrate_rc_osc_32k(); //CO: Had to comment this out
/* Initialize hardware */
init_lowlevel();
/* Clock */
clock_init();
LEDOff(LED1 | LED2);
/* Process subsystem */
@ -158,11 +154,23 @@ main(void)
/* Register initial processes */
procinit_init();
/* It is very important to do the NETSTACK_* initializations right here
* to enable the PROCESS_YIELD** functionality.
* The receive process is an single protothread which handles the
* received packets. This process needs PROCESS_YIELD_UNTIL().
**/
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
/* Autostart processes */
autostart_start(autostart_processes);
printf_P(PSTR("\n********BOOTING CONTIKI*********\n"));
printf_P(PSTR("System online.\n"));
/* Main scheduler loop */