Reincarnate the sensinode/cc2430 port

2012-03-05 16:28:06 +00:00 · 2012-03-05 16:28:06 +00:00 · b7674c3636
commit b7674c3636
parent c78b5bad5c
114 changed files with 10044 additions and 3068 deletions
--- a/platform/sensinode/dev/n740.h
+++ b/platform/sensinode/dev/n740.h
@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2010, Loughborough University - Computer Science
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *         Header File for the module which controls the Sensinode N740
+ *         8-bit serial-in/serial or parallel-out shift register.
+ *
+ *         This is where the Accelerometer, Leds, Light and Battery Sensors
+ *         are connected.
+ *
+ * \author
+ *         George Oikonomou - <oikonomou@users.sourceforge.net>
+ */
+
+#ifndef N740SERPAR_H_
+#define N740SERPAR_H_
+
+#include "8051def.h"
+
+#define N740_SER_PAR_ACC_GSEL    0x01 /* Acceleration Sensor g-Select */
+#define N740_SER_PAR_CHIP_SEL    0x02 /* Flash Chip Select */
+#define N740_SER_PAR_LIGHT       0x04 /* Light Sensor */
+#define N740_SER_PAR_ACC         0x08 /* Acceleration Sensor */
+#define N740_SER_PAR_RF_IN_GAIN  0x10 /* Receiver Amplifier, best not set */
+#define N740_SER_PAR_U5_ENABLE   0x20 /* U5 analog switch enable */
+#define N740_SER_PAR_LED_GREEN   0x40 /* Led 1 */
+#define N740_SER_PAR_LED_RED     0x80 /* Led 2 */
+
+#define N740_ANALOG_SWITCH_USB      0
+#define N740_ANALOG_SWITCH_SERIAL   1
+
+#define N740_PINS 0xE0
+#define N740_PINS_GPIO()   {P1SEL &= ~N740_PINS;}
+#define N740_PINS_PER_IO() {P1SEL |= N740_PINS;}
+
+/* Serial/Parallel Shift Register (74HC595D) Functions */
+void n740_ser_par_init(void);
+void n740_ser_par_set(uint8_t data) ;
+uint8_t n740_ser_par_get(void);
+
+/* Analog Switch (U5 - 74HC4053D) Functions */
+void n740_analog_switch(uint8_t state);
+void n740_analog_activate();
+void n740_analog_deactivate();
+
+#endif /* N740SERPAR_H_ */