diff --git a/examples/osd/pingtheplug/Makefile b/examples/osd/pingtheplug/Makefile new file mode 100644 index 000000000..9f5e50f5a --- /dev/null +++ b/examples/osd/pingtheplug/Makefile @@ -0,0 +1,90 @@ +all: er-example-server +# Use this target explicitly if requried: er-plugtest-server + +CONTIKI=../../.. +CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\" + +# for static routing, if enabled +ifneq ($(TARGET), minimal-net) +ifneq ($(TARGET), native) +ifneq ($(findstring avr,$(TARGET)), avr) +PROJECT_SOURCEFILES += static-routing.c +endif +endif +endif +# pcintkey +PROJECT_SOURCEFILES += pcintkey.c + +# variable for root Makefile.include +WITH_UIP6=1 +# for some platforms +UIP_CONF_IPV6=1 + +# variable for this Makefile +# configure CoAP implementation (3|7) (er-coap-07 also supports CoAP draft 08) +WITH_COAP=7 + +# new variable since slip-radio +ifneq ($(TARGET), minimal-net) +UIP_CONF_RPL=1 +else +# minimal-net does not support RPL under Linux and is mostly used to test CoAP only +${info INFO: compiling without RPL} +UIP_CONF_RPL=0 +CFLAGS += -DUIP_CONF_ND6_DEF_MAXDADNS=0 +CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\" +CFLAGS += -DUIP_CONF_BUFFER_SIZE=1280 +endif + +# linker optimizations +SMALL=1 + +# REST framework, requires WITH_COAP +ifeq ($(WITH_COAP), 7) +${info INFO: compiling with CoAP-08} +CFLAGS += -DWITH_COAP=7 +CFLAGS += -DREST=coap_rest_implementation +CFLAGS += -DUIP_CONF_TCP=0 +APPS += er-coap-07 +else ifeq ($(WITH_COAP), 3) +${info INFO: compiling with CoAP-03} +CFLAGS += -DWITH_COAP=3 +CFLAGS += -DREST=coap_rest_implementation +CFLAGS += -DUIP_CONF_TCP=0 +APPS += er-coap-03 +else +${info INFO: compiling with HTTP} +CFLAGS += -DWITH_HTTP +CFLAGS += -DREST=http_rest_implementation +CFLAGS += -DUIP_CONF_TCP=1 +APPS += er-http-engine +endif + +APPS += erbium + +# optional rules to get assembly +#CUSTOM_RULE_C_TO_OBJECTDIR_O = 1 +#CUSTOM_RULE_S_TO_OBJECTDIR_O = 1 + +include $(CONTIKI)/Makefile.include + +# optional rules to get assembly +#$(OBJECTDIR)/%.o: asmdir/%.S +# $(CC) $(CFLAGS) -MMD -c $< -o $@ +# @$(FINALIZE_DEPENDENCY) +# +#asmdir/%.S: %.c +# $(CC) $(CFLAGS) -MMD -S $< -o $@ + +# border router rules +$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c + (cd $(CONTIKI)/tools && $(MAKE) tunslip6) + +connect-router: $(CONTIKI)/tools/tunslip6 + sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64 + +connect-router-cooja: $(CONTIKI)/tools/tunslip6 + sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64 + +tap0up: + sudo ip address add fdfd::1/64 dev tap0 diff --git a/examples/osd/pingtheplug/README b/examples/osd/pingtheplug/README new file mode 100644 index 000000000..84d7dd2f4 --- /dev/null +++ b/examples/osd/pingtheplug/README @@ -0,0 +1,76 @@ +A Quick Introduction to the Erbium (Er) REST Engine +=================================================== +Compile the Example +------------------- +./run.sh + +OSD-Merkur Board +---------------------- +write the images to the OSD-Merkur Board: + +./flash.sh + +EXAMPLE FILES +------------- +er-example-server.c: A RESTful server example showing how to use the REST layer to develop server-side applications (at the moment only CoAP is implemented for the REST Engine). +er-example-client.c: A CoAP client that polls the /actuators/toggle resource every 10 seconds and cycles through 4 resources on button press (target address is hard-coded). +er-plugtest-server.c: The server used for draft compliance testing at ETSI IoT CoAP Plugtest in Paris, France, March 2012 (configured for minimal-net). + +PRELIMINARIES +------------- +- Make sure rpl-border-router has the same stack and fits into mote memory: + You can disable RDC in border-router project-conf.h (not really required as BR keeps radio turned on). + #undef NETSTACK_CONF_RDC + #define NETSTACK_CONF_RDC nullrdc_driver +- For convenience, define the Cooja addresses in /etc/hosts + aaaa::0212:7401:0001:0101 cooja1 + aaaa::0212:7402:0002:0202 cooja2 + ... +- Get the Copper (Cu) CoAP user-agent from https://addons.mozilla.org/en-US/firefox/addon/copper-270430/ +- Optional: Save your target as default target + $ make TARGET=sky savetarget + +COOJA HOWTO +----------- +Server only: +1) $ make TARGET=cooja server-only.csc +2) Open new terminal +3) $ make connect-router-cooja +4) Start Copper and discover resources at coap://cooja2:5683/ +- Choose "Click button on Sky 2" from the context menu of mote 2 (server) after requesting /test/separate +- Do the same when observing /test/event + +With client: +1) $ make TARGET=cooja server-client.csc +2) Open new terminal +3) $ make connect-router-cooja +4) Wait until red LED toggles on mote 2 (server) +5) Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output + +DETAILS +------- +Erbium currently implements draft 08 (name "er-coap-07" stems from last technical draft changes). +Central features are commented in er-example-server.c. +In general, apps/er-coap-07 supports: +* All draft 08 header options +* CON Retransmissions (note COAP_MAX_OPEN_TRANSACTIONS) +* Blockwise Transfers (note REST_MAX_CHUNK_SIZE, see er-plugtest-server.c for Block1 uploads) +* Separate Responses (no rest_set_pre_handler() required anymore, note coap_separate_accept(), _reject(), and _resume()) +* Resource Discovery +* Observing Resources (see EVENT_ and PRERIODIC_RESOURCE, note COAP_MAX_OBSERVERS) + +REST IMPLEMENTATIONS +-------------------- +The Makefile uses WITH_COAP to configure different implementations for the Erbium (Er) REST Engine. +* WITH_COAP=7 uses Erbium CoAP 08 apps/er-coap-07/. + The default port for coap-07/-08 is 5683. +* WITH_COAP=3 uses Erbium CoAP 03 apps/er-coap-03/. + The default port for coap-03 is 61616. + er-coap-03 produces some warnings, as it not fully maintained anymore. +* WITH_COAP=0 is a stub to link an Erbium HTTP engine that uses the same resource abstraction (REST.x() functions and RESOURCE macros. + +TODOs +----- +* Observe client +* Multiple If-Match ETags +* (Message deduplication) diff --git a/examples/osd/pingtheplug/er-example-server.c b/examples/osd/pingtheplug/er-example-server.c new file mode 100644 index 000000000..f69e7f8c1 --- /dev/null +++ b/examples/osd/pingtheplug/er-example-server.c @@ -0,0 +1,611 @@ +/* + * Copyright (c) 2011, Matthias Kovatsch and other contributors. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * This file is part of the Contiki operating system. + */ + +/** + * \file + * Erbium (Er) PIR REST Engine example (with CoAP-specific code) + * \author + * Matthias Kovatsch + * Harald Pichler + */ + +#include +#include +#include +#include "contiki.h" +#include "contiki-net.h" + + +/* Define which resources to include to meet memory constraints. */ +#define REST_RES_INFO 1 +#define REST_RES_OPTRIAC 1 +#define REST_RES_TEMPERATURE 1 +#define REST_RES_EVENT 0 +#define REST_RES_LEDS 0 +#define REST_RES_TOGGLE 0 +#define REST_RES_BATTERY 1 + +#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE) +#warning "Compiling with static routing!" +#include "static-routing.h" +#endif + +#include "erbium.h" +#include "pcintkey.h" + +#include "dev/led.h" +#if defined (PLATFORM_HAS_BUTTON) +#include "dev/button-sensor.h" +#endif +#if defined (PLATFORM_HAS_LEDS) +#include "dev/leds.h" +#endif +#if defined (PLATFORM_HAS_OPTRIAC) +#include "dev/optriac-sensor.h" +#endif +#if defined (PLATFORM_HAS_TEMPERATURE) +#include "dev/temperature-sensor.h" +#endif +#if defined (PLATFORM_HAS_BATTERY) +#include "dev/battery-sensor.h" +#endif + +#include "dev/optriac.h" + +/* For CoAP-specific example: not required for normal RESTful Web service. */ +#if WITH_COAP == 3 +#include "er-coap-03.h" +#elif WITH_COAP == 7 +#include "er-coap-07.h" +#else +#warning "Erbium example without CoAP-specifc functionality" +#endif /* CoAP-specific example */ + +#define DEBUG 1 +#if DEBUG +#define PRINTF(...) printf(__VA_ARGS__) +#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x]", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15]) +#define PRINTLLADDR(lladdr) PRINTF("[%02x:%02x:%02x:%02x:%02x:%02x]",(lladdr)->addr[0], (lladdr)->addr[1], (lladdr)->addr[2], (lladdr)->addr[3],(lladdr)->addr[4], (lladdr)->addr[5]) +#else +#define PRINTF(...) +#define PRINT6ADDR(addr) +#define PRINTLLADDR(addr) +#endif + +/******************************************************************************/ + +#if REST_RES_INFO +/* + * Resources are defined by the RESOURCE macro. + * Signature: resource name, the RESTful methods it handles, and its URI path (omitting the leading slash). + */ +RESOURCE(info, METHOD_GET, "info", "title=\"Info\";rt=\"text\""); + +/* + * A handler function named [resource name]_handler must be implemented for each RESOURCE. + * A buffer for the response payload is provided through the buffer pointer. Simple resources can ignore + * preferred_size and offset, but must respect the REST_MAX_CHUNK_SIZE limit for the buffer. + * If a smaller block size is requested for CoAP, the REST framework automatically splits the data. + */ +void +info_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + char message[100]; + int index = 0; + int length = 0; /* |<-------->| */ + + /* Some data that has the length up to REST_MAX_CHUNK_SIZE. For more, see the chunk resource. */ + // jSON Format + index += sprintf(message + index,"{\n \"Version\" : \"V1.0pre1\",\n"); + index += sprintf(message + index," \"name\" : \"light-actor\"\n"); + index += sprintf(message + index,"}\n"); + + length = strlen(message); + memcpy(buffer, message,length ); + + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + REST.set_response_payload(response, buffer, length); +} +#endif + +// pcintkey_ext +/*A simple actuator example. read the key button status*/ +RESOURCE(extbutton, METHOD_GET | METHOD_PUT , "sensors/extbutton", "title=\"ext.Button\";rt=\"Text\""); +void +extbutton_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + static char bname1[17]="button1"; + static char bname2[17]="button2"; + static char bname3[17]="button3"; + int success = 1; + + char temp[100]; + int index = 0; + int length = 0; /* |<-------->| */ + const char *name = NULL; + size_t len = 0; + + switch(REST.get_method_type(request)){ + case METHOD_GET: + // jSON Format + index += sprintf(temp + index,"{\n \"%s\" : ",bname1); + if(is_button_ext4()) + index += sprintf(temp + index,"\"on\",\n"); + else + index += sprintf(temp + index,"\"off\",\n"); + index += sprintf(temp + index,"{\n \"%s\" : ",bname2); + if(is_button_ext5()) + index += sprintf(temp + index,"\"on\",\n"); + else + index += sprintf(temp + index,"\"off\",\n"); + index += sprintf(temp + index," \"%s\" : ",bname3); + if(is_button_ext6()) + index += sprintf(temp + index,"\"on\"\n"); + else + index += sprintf(temp + index,"\"off\"\n"); + index += sprintf(temp + index,"}\n"); + + length = strlen(temp); + memcpy(buffer, temp,length ); + + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + REST.set_response_payload(response, buffer, length); + + break; + case METHOD_PUT: + + if (success && (len=REST.get_post_variable(request, "name", &name))) { + PRINTF("name %s\n", name); + memcpy(bname1, name,len); + bname1[len]=0; + } else { + success = 0; + } + break; + default: + success = 0; + } + if (!success) { + REST.set_response_status(response, REST.status.BAD_REQUEST); + } +} +/*A simple actuator example, post variable mode, relay is activated or deactivated*/ +RESOURCE(led1, METHOD_GET | METHOD_PUT , "actuators/led1", "title=\"Led1\";rt=\"led\""); +void +led1_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + char mode[10]; + static uint8_t led1 = 0; + static char name[17]="led1"; + int success = 1; + + char temp[100]; + int index = 0; + size_t len = 0; + + const char *pmode = NULL; + const char *pname = NULL; + + switch(REST.get_method_type(request)){ + case METHOD_GET: + // jSON Format + index += sprintf(temp + index,"{\n \"name\" : \"%s\",\n",name); + if(led1 == 0) + index += sprintf(temp + index," \"mode\" : \"off\"\n"); + if(led1 == 1) + index += sprintf(temp + index," \"mode\" : \"on\"\n"); + index += sprintf(temp + index,"}\n"); + + len = strlen(temp); + memcpy(buffer, temp,len ); + + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + REST.set_response_payload(response, buffer, len); + break; + case METHOD_POST: + success = 0; + break; + case METHOD_PUT: + if (success && (len=REST.get_post_variable(request, "mode", &pmode))) { + PRINTF("name %s\n", mode); + memcpy(mode, pmode,len); + mode[len]=0; + if (!strcmp(mode, "on")) { + led1_on(); + led1 = 1; + } else if (!strcmp(mode, "off")) { + led1_off(); + led1 = 0; + } else { + success = 0; + } + } else if (success && (len=REST.get_post_variable(request, "name", &pname))) { + PRINTF("name %s\n", name); + memcpy(name, pname,len); + name[len]=0; + } else { + success = 0; + } + break; + default: + success = 0; + } + + if (!success) { + REST.set_response_status(response, REST.status.BAD_REQUEST); + } +} + +/******************************************************************************/ +#if defined (PLATFORM_HAS_OPTRIAC) +/******************************************************************************/ +#if REST_RES_OPTRIAC +/*A simple actuator example*/ +RESOURCE(optriac, METHOD_GET | METHOD_POST | METHOD_PUT , "actuators/optriac", "title=\"TRIAC, POST/PUT mode=on|off\";rt=\"Control\""); + +void +optriac_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + const char *mode = NULL; + static char namea[17]="Triac-a"; + static char nameb[17]="Triac-b"; + + char temp[100]; + int index = 0; + size_t len = 0; + int success = 1; + + switch(REST.get_method_type(request)){ + case METHOD_GET: + // jSON Format + index += sprintf(temp + index,"{\n \"%s\" : ",namea); + if(optriac_sensor.value(OPTRIAC_SENSOR_A) == 0) + index += sprintf(temp + index,"\"off\",\n"); + if(optriac_sensor.value(OPTRIAC_SENSOR_A) == 1) + index += sprintf(temp + index,"\"on\",\n"); + index += sprintf(temp + index," \"%s\" : ",nameb); + if(optriac_sensor.value(OPTRIAC_SENSOR_B) == 0) + index += sprintf(temp + index,"\"off\"\n"); + if(optriac_sensor.value(OPTRIAC_SENSOR_B) == 1) + index += sprintf(temp + index,"\"on\"\n"); + index += sprintf(temp + index,"}\n"); + + len = strlen(temp); + memcpy(buffer, temp,len ); + + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + REST.set_response_payload(response, buffer, len); + break; + + case METHOD_POST: + success = 0; + break; + case METHOD_PUT: + if (success && (len=REST.get_post_variable(request, "mode", &mode))) { + PRINTF("mode %s\n", mode); + if (strncmp(mode, "on", len)==0) { + led1_on(); // Debug + optriac_sensor.configure(OPTRIAC_SENSOR_A,1); + optriac_sensor.configure(OPTRIAC_SENSOR_B,1); + } else if (strncmp(mode, "off", len)==0) { + optriac_sensor.configure(OPTRIAC_SENSOR_A,0); + optriac_sensor.configure(OPTRIAC_SENSOR_B,0); + led1_off(); // Debug + } else { + success = 0; + } + } else { + success = 0; + } + break; + default: + success = 0; + } + if (!success) { + REST.set_response_status(response, REST.status.BAD_REQUEST); + } +} +#endif +/******************************************************************************/ +#endif /* PLATFORM_HAS_OPTRIAC */ + +/******************************************************************************/ +#if defined (PLATFORM_HAS_LEDS) +/******************************************************************************/ +#if REST_RES_LEDS +/*A simple actuator example, depending on the color query parameter and post variable mode, corresponding led is activated or deactivated*/ +RESOURCE(leds, METHOD_POST | METHOD_PUT , "actuators/leds", "title=\"LEDs: ?color=r|g|b, POST/PUT mode=on|off\";rt=\"Control\""); + +void +leds_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + size_t len = 0; + const char *color = NULL; + const char *mode = NULL; + uint8_t led = 0; + int success = 1; + + if ((len=REST.get_query_variable(request, "color", &color))) { + PRINTF("color %.*s\n", len, color); + + if (strncmp(color, "r", len)==0) { + led = LEDS_RED; + } else if(strncmp(color,"g", len)==0) { + led = LEDS_GREEN; + } else if (strncmp(color,"b", len)==0) { + led = LEDS_BLUE; + } else { + success = 0; + } + } else { + success = 0; + } + + if (success && (len=REST.get_post_variable(request, "mode", &mode))) { + PRINTF("mode %s\n", mode); + + if (strncmp(mode, "on", len)==0) { + leds_on(led); + } else if (strncmp(mode, "off", len)==0) { + leds_off(led); + } else { + success = 0; + } + } else { + success = 0; + } + + if (!success) { + REST.set_response_status(response, REST.status.BAD_REQUEST); + } +} +#endif + +/******************************************************************************/ +#if REST_RES_TOGGLE +/* A simple actuator example. Toggles the red led */ +RESOURCE(toggle, METHOD_GET | METHOD_PUT | METHOD_POST, "actuators/toggle", "title=\"Red LED\";rt=\"Control\""); +void +toggle_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + leds_toggle(LEDS_RED); +} +#endif +#endif /* PLATFORM_HAS_LEDS */ + +/******************************************************************************/ + +/******************************************************************************/ +#if REST_RES_TEMPERATURE && defined (PLATFORM_HAS_TEMPERATURE) +/* A simple getter example. Returns the reading from light sensor with a simple etag */ +RESOURCE(temperature, METHOD_GET, "sensors/cputemp", "title=\"Temperature status\";rt=\"temperature-c\""); +void +temperature_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + int temperature = temperature_sensor.value(0); + + const uint16_t *accept = NULL; + int num = REST.get_header_accept(request, &accept); + + if ((num==0) || (num && accept[0]==REST.type.TEXT_PLAIN)) + { + REST.set_header_content_type(response, REST.type.TEXT_PLAIN); + snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", temperature); + + REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer)); + } + else if (num && (accept[0]==REST.type.APPLICATION_JSON)) + { + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%d}", temperature); + + REST.set_response_payload(response, buffer, strlen((char *)buffer)); + } + else + { + REST.set_response_status(response, REST.status.UNSUPPORTED_MADIA_TYPE); + const char *msg = "Supporting content-types text/plain and application/json"; + REST.set_response_payload(response, msg, strlen(msg)); + } +} +#endif /* PLATFORM_HAS_TEMPERATURE */ + +/******************************************************************************/ +#if REST_RES_BATTERY && defined (PLATFORM_HAS_BATTERY) +/* A simple getter example. Returns the reading from light sensor with a simple etag */ +RESOURCE(battery, METHOD_GET, "sensors/battery", "title=\"Battery status\";rt=\"battery-mV\""); +void +battery_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset) +{ + int battery = battery_sensor.value(0); + + const uint16_t *accept = NULL; + int num = REST.get_header_accept(request, &accept); + + if ((num==0) || (num && accept[0]==REST.type.TEXT_PLAIN)) + { + REST.set_header_content_type(response, REST.type.TEXT_PLAIN); + snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", battery); + + REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer)); + } + else if (num && (accept[0]==REST.type.APPLICATION_JSON)) + { + REST.set_header_content_type(response, REST.type.APPLICATION_JSON); + snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'battery':%d}", battery); + + REST.set_response_payload(response, buffer, strlen((char *)buffer)); + } + else + { + REST.set_response_status(response, REST.status.UNSUPPORTED_MADIA_TYPE); + const char *msg = "Supporting content-types text/plain and application/json"; + REST.set_response_payload(response, msg, strlen(msg)); + } +} +#endif /* PLATFORM_HAS_BATTERY */ +/******************************************************************************/ + + + +void +hw_init() +{ + led1_off(); + key_init(); +} + +#define MESURE_INTERVAL (CLOCK_SECOND/2) + +PROCESS(rest_server_example, "Erbium Example Server"); + +AUTOSTART_PROCESSES(&rest_server_example, &sensors_process); + +PROCESS_THREAD(rest_server_example, ev, data) +{ + static struct etimer ds_periodic_timer; + static int ext4=0; + static int ext5=0; + static int ext6=0; +// ext4 = is_button_ext4(); +// ext5 = is_button_ext5(); +// ext6 = is_button_ext6(); + + + PROCESS_BEGIN(); + PRINTF("Starting Erbium Example Server\n"); + +#ifdef RF_CHANNEL + PRINTF("RF channel: %u\n", RF_CHANNEL); +#endif +#ifdef IEEE802154_PANID + PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID); +#endif + + PRINTF("uIP buffer: %u\n", UIP_BUFSIZE); + PRINTF("LL header: %u\n", UIP_LLH_LEN); + PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN); + PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE); + +/* if static routes are used rather than RPL */ +#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE) + set_global_address(); + configure_routing(); +#endif + + /* Initialize the OSD Hardware. */ + hw_init(); + /* Initialize the REST engine. */ + rest_init_engine(); + + /* Activate the application-specific resources. */ + rest_activate_resource(&resource_led1); + rest_activate_resource(&resource_extbutton); +#if REST_RES_INFO + rest_activate_resource(&resource_info); +#endif + /* Activate the application-specific resources. */ +#if REST_RES_OPTRIAC + SENSORS_ACTIVATE(optriac_sensor); + rest_activate_resource(&resource_optriac); +#endif +#if defined (PLATFORM_HAS_PIR) && (REST_RES_EVENT) + SENSORS_ACTIVATE(pir_sensor); + rest_activate_event_resource(&resource_pir); + PRINTF("ACTIVATE PIR\n"); +#endif +#if defined (PLATFORM_HAS_LEDS) +#if REST_RES_LEDS + rest_activate_resource(&resource_leds); +#endif +#if REST_RES_TOGGLE + rest_activate_resource(&resource_toggle); +#endif +#endif /* PLATFORM_HAS_LEDS */ +#if defined (PLATFORM_HAS_TEMPERATURE) && REST_RES_TEMPERATURE + SENSORS_ACTIVATE(temperature_sensor); + rest_activate_resource(&resource_temperature); +#endif +#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY + SENSORS_ACTIVATE(battery_sensor); + rest_activate_resource(&resource_battery); +#endif + + etimer_set(&ds_periodic_timer, MESURE_INTERVAL); + /* Define application-specific events here. */ + while(1) { + PROCESS_WAIT_EVENT(); +#if defined (REST_RES_EVENT) + if (ev == sensors_event ) { + PRINTF("EVENT\n"); +#if (REST_RES_EVENT && defined (PLATFORM_HAS_PIR)) + if (data == &pir_sensor) { + PRINTF("PIR EVENT\n"); + /* Call the event_handler for this application-specific event. */ + pir_event_handler(&resource_pir); + PRINTF("CALL EVENT HANDLER\n"); + } +#endif /* PLATFORM_HAS_PIR */ + } +#endif /* REST_RES_EVENT */ + /* Button Tric Logic */ + if(etimer_expired(&ds_periodic_timer)) { + PRINTF("Periodic %d %d\n",ext5,ext6); + if(ext5 != is_button_ext5()) { + ext5 = is_button_ext5(); + PRINTF("Toggle Triac A\n"); + // Toggle Triac A + if(optriac_sensor.value(OPTRIAC_SENSOR_A) == 0){ + optriac_sensor.configure(OPTRIAC_SENSOR_A,1); + led1_on(); + }else{ + optriac_sensor.configure(OPTRIAC_SENSOR_A,0); + led1_off(); + } + } + if(ext6 != is_button_ext6()) { + ext6 = is_button_ext6(); + PRINTF("Toggle Triac B\n"); + // Toggle Triac B + if(optriac_sensor.value(OPTRIAC_SENSOR_B) == 0){ + optriac_sensor.configure(OPTRIAC_SENSOR_B,1); + led2_on(); + }else{ + optriac_sensor.configure(OPTRIAC_SENSOR_B,0); + led2_off(); + } + } + etimer_reset(&ds_periodic_timer); + } + } /* while (1) */ + + PROCESS_END(); +} diff --git a/examples/osd/pingtheplug/flash.sh b/examples/osd/pingtheplug/flash.sh new file mode 100755 index 000000000..e92d472f6 --- /dev/null +++ b/examples/osd/pingtheplug/flash.sh @@ -0,0 +1,2 @@ +#!/bin/bash +sudo avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-server.osd-merkur.hex:a -U eeprom:w:er-example-server.osd-merkur.eep:a diff --git a/examples/osd/pingtheplug/pcintkey.c b/examples/osd/pingtheplug/pcintkey.c new file mode 100644 index 000000000..3da35669d --- /dev/null +++ b/examples/osd/pingtheplug/pcintkey.c @@ -0,0 +1,118 @@ +/* + * Copyright (c) 2010 harald pichler + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of the copyright holders nor the names of + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +/** + * \file + * + * \brief + * This file provides Raven KEY support. + * + * \author + * Harald Pichler harald@the-develop.net + * + */ + +#include +#include "dev/led.h" +#include "pcintkey.h" + +/*---------------------------------------------------------------------------*/ + +ISR(PCINT0_vect) +{ +// if(BUTTON_CHECK_IRQ()) { +// if(timer_expired(&debouncetimer)) { +// led1_on(); +// timer_set(&debouncetimer, CLOCK_SECOND / 4); +// sensors_changed(&button_sensor); +// led1_off(); +// } +// } +} +/** + * \brief This will intialize the KEY for button readings. +*/ +void +key_init(void) +{ + // Pairing Button + PORTB |= (1< +#include + +void key_init(void); +uint8_t is_button_ext4(void); +uint8_t is_button_ext5(void); +uint8_t is_button_ext6(void); + +#endif /* __KEY_H__ */ diff --git a/examples/osd/pingtheplug/project-conf.h b/examples/osd/pingtheplug/project-conf.h new file mode 100644 index 000000000..54f947d7e --- /dev/null +++ b/examples/osd/pingtheplug/project-conf.h @@ -0,0 +1,77 @@ +/* + * Copyright (c) 2010, Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Institute nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * + */ + +#ifndef __PROJECT_RPL_WEB_CONF_H__ +#define __PROJECT_RPL_WEB_CONF_H__ + +//#define PLATFORM_HAS_LEDS 1 +//#define PLATFORM_HAS_BUTTON 1 +#define PLATFORM_HAS_OPTRIAC 1 +#define PLATFORM_HAS_TEMPERATURE 1 +#define PLATFORM_HAS_BATTERY 1 + +#define SICSLOWPAN_CONF_FRAG 1 + +/* For Debug: Dont allow MCU sleeping between channel checks */ +//#undef RDC_CONF_MCU_SLEEP +//#define RDC_CONF_MCU_SLEEP 0 + +/* Disabling RDC for demo purposes. Core updates often require more memory. */ +/* For projects, optimize memory and enable RDC again. */ +//#undef NETSTACK_CONF_RDC +//#define NETSTACK_CONF_RDC nullrdc_driver + +/* Save some memory for the sky platform. */ +#undef UIP_CONF_DS6_NBR_NBU +#define UIP_CONF_DS6_NBR_NBU 10 +#undef UIP_CONF_DS6_ROUTE_NBU +#define UIP_CONF_DS6_ROUTE_NBU 10 + +/* Increase rpl-border-router IP-buffer when using 128. */ +#ifndef REST_MAX_CHUNK_SIZE +#define REST_MAX_CHUNK_SIZE 64 +#endif + +/* Multiplies with chunk size, be aware of memory constraints. */ +#ifndef COAP_MAX_OPEN_TRANSACTIONS +#define COAP_MAX_OPEN_TRANSACTIONS 2 +#endif + +/* Must be <= open transaction number. */ +#ifndef COAP_MAX_OBSERVERS +#define COAP_MAX_OBSERVERS COAP_MAX_OPEN_TRANSACTIONS-1 +#endif + +/* Reduce 802.15.4 frame queue to save RAM. */ +#undef QUEUEBUF_CONF_NUM +#define QUEUEBUF_CONF_NUM 4 + +#endif /* __PROJECT_RPL_WEB_CONF_H__ */ diff --git a/examples/osd/pingtheplug/run.sh b/examples/osd/pingtheplug/run.sh new file mode 100755 index 000000000..4f21e9b63 --- /dev/null +++ b/examples/osd/pingtheplug/run.sh @@ -0,0 +1,6 @@ +#!/bin/bash +make clean TARGET=osd-merkur +make TARGET=osd-merkur +avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur +avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex +avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep diff --git a/examples/osd/pingtheplug/server-client.csc b/examples/osd/pingtheplug/server-client.csc new file mode 100644 index 000000000..8c45fdf02 --- /dev/null +++ b/examples/osd/pingtheplug/server-client.csc @@ -0,0 +1,227 @@ + + + [CONTIKI_DIR]/tools/cooja/apps/mrm + [CONTIKI_DIR]/tools/cooja/apps/mspsim + [CONTIKI_DIR]/tools/cooja/apps/avrora + [CONTIKI_DIR]/tools/cooja/apps/serial_socket + [CONTIKI_DIR]/tools/cooja/apps/collect-view + + REST with RPL router + -2147483648 + 123456 + 1000000 + + se.sics.cooja.radiomediums.UDGM + 50.0 + 50.0 + 1.0 + 1.0 + + + 40000 + + + se.sics.cooja.mspmote.SkyMoteType + rplroot + Sky RPL Root + [CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c + make border-router.sky TARGET=sky + [CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky + se.sics.cooja.interfaces.Position + se.sics.cooja.interfaces.RimeAddress + se.sics.cooja.interfaces.IPAddress + se.sics.cooja.interfaces.Mote2MoteRelations + se.sics.cooja.interfaces.MoteAttributes + se.sics.cooja.mspmote.interfaces.MspClock + se.sics.cooja.mspmote.interfaces.MspMoteID + se.sics.cooja.mspmote.interfaces.SkyButton + se.sics.cooja.mspmote.interfaces.SkyFlash + se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem + se.sics.cooja.mspmote.interfaces.SkyByteRadio + se.sics.cooja.mspmote.interfaces.MspSerial + se.sics.cooja.mspmote.interfaces.SkyLED + se.sics.cooja.mspmote.interfaces.MspDebugOutput + se.sics.cooja.mspmote.interfaces.SkyTemperature + + + se.sics.cooja.mspmote.SkyMoteType + server + Erbium Server + [CONTIKI_DIR]/examples/er-rest-example/er-example-server.c + make er-example-server.sky TARGET=sky + [CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky + se.sics.cooja.interfaces.Position + se.sics.cooja.interfaces.RimeAddress + se.sics.cooja.interfaces.IPAddress + se.sics.cooja.interfaces.Mote2MoteRelations + se.sics.cooja.interfaces.MoteAttributes + se.sics.cooja.mspmote.interfaces.MspClock + se.sics.cooja.mspmote.interfaces.MspMoteID + se.sics.cooja.mspmote.interfaces.SkyButton + se.sics.cooja.mspmote.interfaces.SkyFlash + se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem + se.sics.cooja.mspmote.interfaces.SkyByteRadio + se.sics.cooja.mspmote.interfaces.MspSerial + se.sics.cooja.mspmote.interfaces.SkyLED + se.sics.cooja.mspmote.interfaces.MspDebugOutput + se.sics.cooja.mspmote.interfaces.SkyTemperature + + + se.sics.cooja.mspmote.SkyMoteType + client + Erbium Client + [CONTIKI_DIR]/examples/er-rest-example/er-example-client.c + make er-example-client.sky TARGET=sky + [CONTIKI_DIR]/examples/er-rest-example/er-example-client.sky + se.sics.cooja.interfaces.Position + se.sics.cooja.interfaces.RimeAddress + se.sics.cooja.interfaces.IPAddress + se.sics.cooja.interfaces.Mote2MoteRelations + se.sics.cooja.interfaces.MoteAttributes + se.sics.cooja.mspmote.interfaces.MspClock + se.sics.cooja.mspmote.interfaces.MspMoteID + se.sics.cooja.mspmote.interfaces.SkyButton + se.sics.cooja.mspmote.interfaces.SkyFlash + se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem + se.sics.cooja.mspmote.interfaces.SkyByteRadio + se.sics.cooja.mspmote.interfaces.MspSerial + se.sics.cooja.mspmote.interfaces.SkyLED + se.sics.cooja.mspmote.interfaces.MspDebugOutput + se.sics.cooja.mspmote.interfaces.SkyTemperature + + + + + se.sics.cooja.interfaces.Position + 33.260163187353555 + 30.643217359962595 + 0.0 + + + se.sics.cooja.mspmote.interfaces.MspMoteID + 1 + + rplroot + + + + + se.sics.cooja.interfaces.Position + 46.57186415376375 + 40.35946215910942 + 0.0 + + + se.sics.cooja.mspmote.interfaces.MspMoteID + 2 + + server + + + + + se.sics.cooja.interfaces.Position + 18.638049428485125 + 47.55034515769599 + 0.0 + + + se.sics.cooja.mspmote.interfaces.MspMoteID + 3 + + client + + + + se.sics.cooja.plugins.SimControl + 259 + 0 + 179 + 0 + 0 + + + se.sics.cooja.plugins.Visualizer + + se.sics.cooja.plugins.skins.IDVisualizerSkin + se.sics.cooja.plugins.skins.UDGMVisualizerSkin + se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin + se.sics.cooja.plugins.skins.AttributeVisualizerSkin + se.sics.cooja.plugins.skins.LEDVisualizerSkin + se.sics.cooja.plugins.skins.AddressVisualizerSkin + 3.61568947862321 0.0 0.0 3.61568947862321 15.610600779367 -85.92728269158351 + + 300 + 2 + 178 + 261 + 1 + + + se.sics.cooja.plugins.LogListener + + + + + 762 + 3 + 491 + 2 + 182 + + + se.sics.cooja.plugins.RadioLogger + + 150 + + + 451 + -1 + 305 + 73 + 140 + true + + + SerialSocketServer + 0 + 422 + 4 + 74 + 578 + 18 + + + se.sics.cooja.plugins.TimeLine + + 0 + 1 + 2 + + + + + 125 + 25.49079397896416 + + 1624 + 5 + 252 + 6 + 712 + + + se.sics.cooja.plugins.MoteInterfaceViewer + 2 + + Serial port + 0,0 + + 853 + 1 + 491 + 765 + 182 + + + diff --git a/examples/osd/pingtheplug/server-only.csc b/examples/osd/pingtheplug/server-only.csc new file mode 100644 index 000000000..d5eee34d6 --- /dev/null +++ b/examples/osd/pingtheplug/server-only.csc @@ -0,0 +1,189 @@ + + + [CONTIKI_DIR]/tools/cooja/apps/mrm + [CONTIKI_DIR]/tools/cooja/apps/mspsim + [CONTIKI_DIR]/tools/cooja/apps/avrora + [CONTIKI_DIR]/tools/cooja/apps/serial_socket + [CONTIKI_DIR]/tools/cooja/apps/collect-view + + REST with RPL router + -2147483648 + 123456 + 1000000 + + se.sics.cooja.radiomediums.UDGM + 50.0 + 50.0 + 1.0 + 1.0 + + + 40000 + + + se.sics.cooja.mspmote.SkyMoteType + rplroot + Sky RPL Root + [CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c + make border-router.sky TARGET=sky + [CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky + se.sics.cooja.interfaces.Position + se.sics.cooja.interfaces.RimeAddress + se.sics.cooja.interfaces.IPAddress + se.sics.cooja.interfaces.Mote2MoteRelations + se.sics.cooja.interfaces.MoteAttributes + se.sics.cooja.mspmote.interfaces.MspClock + se.sics.cooja.mspmote.interfaces.MspMoteID + se.sics.cooja.mspmote.interfaces.SkyButton + se.sics.cooja.mspmote.interfaces.SkyFlash + se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem + se.sics.cooja.mspmote.interfaces.SkyByteRadio + se.sics.cooja.mspmote.interfaces.MspSerial + se.sics.cooja.mspmote.interfaces.SkyLED + se.sics.cooja.mspmote.interfaces.MspDebugOutput + se.sics.cooja.mspmote.interfaces.SkyTemperature + + + se.sics.cooja.mspmote.SkyMoteType + server + Erbium Server + [CONTIKI_DIR]/examples/er-rest-example/er-example-server.c + make er-example-server.sky TARGET=sky + [CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky + se.sics.cooja.interfaces.Position + se.sics.cooja.interfaces.RimeAddress + se.sics.cooja.interfaces.IPAddress + se.sics.cooja.interfaces.Mote2MoteRelations + se.sics.cooja.interfaces.MoteAttributes + se.sics.cooja.mspmote.interfaces.MspClock + se.sics.cooja.mspmote.interfaces.MspMoteID + se.sics.cooja.mspmote.interfaces.SkyButton + se.sics.cooja.mspmote.interfaces.SkyFlash + se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem + se.sics.cooja.mspmote.interfaces.SkyByteRadio + se.sics.cooja.mspmote.interfaces.MspSerial + se.sics.cooja.mspmote.interfaces.SkyLED + se.sics.cooja.mspmote.interfaces.MspDebugOutput + se.sics.cooja.mspmote.interfaces.SkyTemperature + + + + + se.sics.cooja.interfaces.Position + 33.260163187353555 + 30.643217359962595 + 0.0 + + + se.sics.cooja.mspmote.interfaces.MspMoteID + 1 + + rplroot + + + + + se.sics.cooja.interfaces.Position + 35.100895239785295 + 39.70574552287428 + 0.0 + + + se.sics.cooja.mspmote.interfaces.MspMoteID + 2 + + server + + + + se.sics.cooja.plugins.SimControl + 259 + 5 + 179 + 0 + 0 + + + se.sics.cooja.plugins.Visualizer + + se.sics.cooja.plugins.skins.IDVisualizerSkin + se.sics.cooja.plugins.skins.UDGMVisualizerSkin + se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin + se.sics.cooja.plugins.skins.AttributeVisualizerSkin + se.sics.cooja.plugins.skins.LEDVisualizerSkin + se.sics.cooja.plugins.skins.AddressVisualizerSkin + 7.9849281638410705 0.0 0.0 7.9849281638410705 -133.27812697619663 -225.04752569190535 + + 300 + 4 + 175 + 263 + 3 + + + se.sics.cooja.plugins.LogListener + + + + + 560 + 1 + 326 + 1 + 293 + + + se.sics.cooja.plugins.RadioLogger + + 150 + + + 451 + -1 + 305 + 73 + 140 + true + + + SerialSocketServer + 0 + 422 + 2 + 74 + 39 + 199 + + + se.sics.cooja.plugins.TimeLine + + 0 + 1 + + + + + 125 + 25.49079397896416 + + 1624 + 3 + 252 + 4 + 622 + + + se.sics.cooja.plugins.MoteInterfaceViewer + 1 + + Serial port + 0,0 + + 702 + 0 + 646 + 564 + 2 + + + diff --git a/examples/osd/pingtheplug/static-routing.c b/examples/osd/pingtheplug/static-routing.c new file mode 100644 index 000000000..628594892 --- /dev/null +++ b/examples/osd/pingtheplug/static-routing.c @@ -0,0 +1,155 @@ +/* + * static-routing.c + * + * Created on: Oct 12, 2010 + * Author: simonduq + */ + +#include +#include "static-routing.h" + +#define DEBUG 0 +#if DEBUG +#include +#define PRINTF(...) printf(__VA_ARGS__) +#define PRINT6ADDR(addr) PRINTF(" %02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x ", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15]) +#define PRINTLLADDR(lladdr) PRINTF(" %02x:%02x:%02x:%02x:%02x:%02x ",(lladdr)->addr[0], (lladdr)->addr[1], (lladdr)->addr[2], (lladdr)->addr[3],(lladdr)->addr[4], (lladdr)->addr[5]) +#else +#define PRINTF(...) +#define PRINT6ADDR(addr) +#define PRINTLLADDR(addr) +#endif + +#include "contiki-net.h" +#include "node-id.h" + +int node_rank; + +struct id_to_addrs { + int id; + uint32_t addr; +}; + +const struct id_to_addrs motes_addrs[] = { +/* + * Static routing requires a map nodeid => address. + * The nodeid can be programmed with the sky-shell. + * The addresses should also be added to /etc/hosts. + * + * aaaa::212:7400:1160:f62d sky1 + * aaaa::212:7400:0da0:d748 sky2 + * aaaa::212:7400:116e:c325 sky3 + * aaaa::212:7400:116e:c444 sky4 + * aaaa::212:7400:115e:b717 sky5 + * + * Add the nodeid and last 4 bytes of the address to the map. + */ + {1, 0x1160f62d}, + {2, 0x0da0d748}, + {3, 0x116ec325}, + {4, 0x116ec444}, + {5, 0x115eb717}, +}; +/* Define the size of the map. */ +#define NODES_IN_MAP 5 + +uint32_t get_mote_suffix(int rank) { + if(--rank >=0 && rank<(sizeof(motes_addrs)/sizeof(struct id_to_addrs))) { + return motes_addrs[rank].addr; + } + return 0; +} + +int get_mote_id(uint32_t suffix) { +#if IN_COOJA + return suffix & 0xff; +#else + int i; + for(i=0; i<(sizeof(motes_addrs)/sizeof(struct id_to_addrs)); i++) { + if(suffix == motes_addrs[i].addr) { + return motes_addrs[i].id; + } + } + return 0; +#endif +} + +void set_global_address(void) { + uip_ipaddr_t ipaddr; + + uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0); + uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr); + uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF); +} + +static void add_route_ext(int dest, int next) { + PRINTF("add route ext %d %d\n", dest, next); + uip_ipaddr_t ipaddr_dest, ipaddr_next; + uip_ip6addr(&ipaddr_dest, 0xaaaa, 0, 0, 0, 0, 0, 0, dest); +#if IN_COOJA + uip_ip6addr(&ipaddr_next, 0xfe80, 0, 0, 0, 0x0212, 0x7400 | next, next, next<<8 | next); +#else + uint32_t next_suffix = get_mote_suffix(next); + uip_ip6addr(&ipaddr_next, 0xfe80, 0, 0, 0, 0x0212, 0x7400, (next_suffix >> 16) & 0xffff, next_suffix & 0xffff); +#endif + uip_ds6_route_add(&ipaddr_dest, 128, &ipaddr_next, 0); +} + +void add_route(int dest, int next) { + PRINTF("add route %d %d\n", dest, next); + uip_ipaddr_t ipaddr_dest, ipaddr_next; +#if IN_COOJA + uip_ip6addr(&ipaddr_dest, 0xaaaa, 0, 0, 0, 0x0212, 0x7400 | dest, dest, dest<<8 | dest); + uip_ip6addr(&ipaddr_next, 0xfe80, 0, 0, 0, 0x0212, 0x7400 | next, next, next<<8 | next); +#else + uint32_t dest_suffix = get_mote_suffix(dest); + uint32_t next_suffix = get_mote_suffix(next); + uip_ip6addr(&ipaddr_dest, 0xaaaa, 0, 0, 0, 0x0212, 0x7400, (dest_suffix >> 16) & 0xffff, dest_suffix & 0xffff); + uip_ip6addr(&ipaddr_next, 0xfe80, 0, 0, 0, 0x0212, 0x7400, (next_suffix >> 16) & 0xffff, next_suffix & 0xffff); +#endif + uip_ds6_route_add(&ipaddr_dest, 128, &ipaddr_next, 0); +} + +void configure_routing(void) { + int i; +#if IN_COOJA + node_rank = node_id; +#else + node_rank = -1; + for(i=0; i<(sizeof(motes_addrs)/sizeof(struct id_to_addrs)); ++i) { + if(node_id == motes_addrs[i].id) { + node_rank = i+1; + break; + } + } + + if(node_rank == -1) { + printf("unable to configure routing, node_id=%d\n", node_id); + return; + } +#endif + + printf("configure_routing, node_id=%d, node_rank %d\n", node_id, node_rank); + + if (node_rank == 1) { /* border router #1 */ + add_route_ext(2, 2); + for(i=2; i<=NODES_IN_MAP; ++i) { + add_route(i, 2); + } + } else if (node_rank < NODES_IN_MAP) { /* other node */ + add_route_ext(1, node_rank-1); + add_route_ext(2, node_rank+1); + for(i=1; i<=NODES_IN_MAP; ++i) { + if(inode_rank) { + add_route(i, node_rank+1); + } + } + } else if (node_rank == NODES_IN_MAP) { /* 2nd border router */ + add_route_ext(1, NODES_IN_MAP-1); + for(i=1; i<=NODES_IN_MAP-1; ++i) { + add_route(i, NODES_IN_MAP-1); + } + } +} diff --git a/examples/osd/pingtheplug/static-routing.h b/examples/osd/pingtheplug/static-routing.h new file mode 100644 index 000000000..0dff0b7ba --- /dev/null +++ b/examples/osd/pingtheplug/static-routing.h @@ -0,0 +1,20 @@ +/* + * static-routing.h + * + * Created on: Oct 12, 2010 + * Author: simonduq + */ + +#ifndef STATICROUTING_H_ +#define STATICROUTING_H_ + +#include "contiki.h" + +extern int node_rank; +extern uint32_t get_mote_suffix(int id); +extern int get_mote_id(uint32_t suffix); +extern void add_route(int dest, int next); +extern void set_global_address(void); +extern void configure_routing(void); + +#endif /* STATICROUTING_H_ */ diff --git a/examples/osd/pingtheplug/todo b/examples/osd/pingtheplug/todo new file mode 100644 index 000000000..c72368662 --- /dev/null +++ b/examples/osd/pingtheplug/todo @@ -0,0 +1,9 @@ +*) pcintkey-sensor +Die PinChange Interrupts der Pins laufen alle über PCINT0_vect. + +Somit sollte der folgende Code für die Aktivierung reichen: +PCICR |= BV(PCIE0); +PCMSK0 |= BV(PCINT4) | BV(PCINT5) | BV(PCINT6); + +*) led-sensor +*) EmbedVM integration