diff --git a/platform/stm32nucleo-spirit1/README.md b/platform/stm32nucleo-spirit1/README.md
index 4b7c54b80..6d574010d 100644
--- a/platform/stm32nucleo-spirit1/README.md
+++ b/platform/stm32nucleo-spirit1/README.md
@@ -35,15 +35,15 @@ http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260002
  >The X-NUCLEO-IDS01A4 and X-NUCLEO-IDS01A5 are STM32 Nucleo expansion boards that use 
 the module SPSGRF-868 or SPSGRF-915 based on SPIRIT1 low data rate, low power sub-1 GHz transceiver.
 
->The user can select the X-NUCLEO-IDS01A4 board to operate the SPIRIT1 transceiver at 868MHz or the X-NUCLEO-IDS01A5 board to operate the SPIRIT1 transceiver at 915MHz.
+ >The user can select the X-NUCLEO-IDS01A4 board to operate the SPIRIT1 transceiver at 868MHz or the X-NUCLEO-IDS01A5 board to operate the SPIRIT1 transceiver at 915MHz.
 
->Detailed information on the X-NUCLEO-IDS01A4 expansion board can be found at:
+ >Detailed information on the X-NUCLEO-IDS01A4 expansion board can be found at:
 http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261982
 
->Detailed information on the X-NUCLEO-IDS01A5 expansion board can be found at:
+ >Detailed information on the X-NUCLEO-IDS01A5 expansion board can be found at:
 http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261983 
 
->Detailed information on the SPIRIT1 sub-1GHz transceiver can be found at:
+ >Detailed information on the SPIRIT1 sub-1GHz transceiver can be found at:
 http://www.st.com/web/catalog/sense_power/FM2185/SC1845/PF253167
 
 * X-NUCLEO-IKS01A1, motion MEMS and environmental sensors expansion board (OPTIONAL)
@@ -51,7 +51,7 @@ http://www.st.com/web/catalog/sense_power/FM2185/SC1845/PF253167
  >The X-NUCLEO-IKS01A1 is a motion MEMS and environmental sensor evaluation board.
 The use of this board is optional in the stm32nucleo-spirit1 Contiki platform. 
 
->Detailed information on the X-NUCLEO-IKS01A1 expansion board can be found at:
+ >Detailed information on the X-NUCLEO-IKS01A1 expansion board can be found at:
 http://www.st.com/web/catalog/tools/FM146/CL2167/SC2006/PF261191
 
 
@@ -63,12 +63,12 @@ Software Requirements
 The following software are needed:
 
 * ST port of Contiki for STM32 Nucleo and expansion boards. 
->The port is installed automatically when the Contiki repository is cloned.
+ >The port is installed automatically when the Contiki repository is cloned.
 The platform name is: stm32nucleo-spirit1
 
 * A toolchain to build the firmware: The port has been developed and tested with GNU Tools 
 for ARM Embedded Processors.
->The toolchain can be found at: https://launchpad.net/gcc-arm-embedded
+ >The toolchain can be found at: https://launchpad.net/gcc-arm-embedded
 The port was developed and tested using this version: gcc-arm-none-eabi v4.8.3