Refactor contiki-conf files, remove obsolete defines.
This commit is contained in:
dak664
parent
0e60c99e80
commit
a9dedfee4f
2 changed files with 161 additions and 165 deletions
|
|
@ -44,9 +44,11 @@
|
|||
#define __CONTIKI_CONF_H__
|
||||
|
||||
/* MCU and clock rate */
|
||||
#define MCU_MHZ 8
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
#define RAVEN_REVISION RAVEN_D
|
||||
#ifndef F_CPU
|
||||
#define F_CPU 8000000UL
|
||||
#endif
|
||||
|
||||
/* Clock ticks per second */
|
||||
#define CLOCK_CONF_SECOND 125
|
||||
|
|
@ -57,46 +59,82 @@
|
|||
/* Maximum time interval (used for timers) */
|
||||
#define INFINITE_TIME 0xffff
|
||||
|
||||
/* COM port to be used for SLIP connection */
|
||||
/* COM port to be used for SLIP connection. Not tested on Raven */
|
||||
#define SLIP_PORT RS232_PORT_0
|
||||
|
||||
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
|
||||
#define MMEM_CONF_SIZE 256
|
||||
|
||||
/* Use the following address for code received via the codeprop
|
||||
* facility
|
||||
*/
|
||||
#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
/* Default is 4096. Currently used only when elfloader is present. Not tested on Raven */
|
||||
//#define MMEM_CONF_SIZE 256
|
||||
/* Starting address for code received via the codeprop facility. Not tested on Raven */
|
||||
//#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
#define CCIF
|
||||
#define CLIF
|
||||
|
||||
#define RIMEADDR_CONF_SIZE 8
|
||||
/* Network setup. The new NETSTACK interface requires RF230BB (as does ip4) */
|
||||
#if RF230BB
|
||||
//#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //sicslowpan calls radio->read function
|
||||
#undef PACKETBUF_CONF_HDR_SIZE //using the packetbuf default for header size
|
||||
#else
|
||||
#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 combined driver/mac handles headers internally
|
||||
#endif /*RF230BB */
|
||||
|
||||
//define UIP_CONF_IPV6 1 //Let the makefile do this, allows hello-world to compile
|
||||
#if UIP_CONF_IPV6
|
||||
#define RIMEADDR_CONF_SIZE 8
|
||||
#define UIP_CONF_ICMP6 1
|
||||
#define UIP_CONF_UDP 1
|
||||
#define UIP_CONF_TCP 1
|
||||
#define UIP_CONF_IPV6_RPL 0
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
||||
#else
|
||||
/* ip4 should build but is largely untested */
|
||||
#define RIMEADDR_CONF_SIZE 2
|
||||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#endif
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
|
||||
/* The new NETSTACK interface requires RF230BB */
|
||||
#if RF230BB
|
||||
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
|
||||
#undef PACKETBUF_CONF_HDR_SIZE //RF230BB takes the packetbuf default for header size
|
||||
#else
|
||||
#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 handles headers internally
|
||||
#endif /*RF230BB */
|
||||
/* See uip-ds6.h */
|
||||
#define UIP_CONF_DS6_NBR_NBU 20
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 20
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
|
||||
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 0
|
||||
|
||||
#if 1 /* Network setup */
|
||||
/* 10 bytes per stateful address context - see sicslowpan.c */
|
||||
/* These must agree with all the other nodes or there will be a failure to communicate! */
|
||||
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 3
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 {addr_contexts[0].prefix[0]=0xaa;addr_contexts[0].prefix[1]=0xaa;}
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_1 {addr_contexts[1].prefix[0]=0xbb;addr_contexts[1].prefix[1]=0xbb;}
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_2 {addr_contexts[2].prefix[0]=0x20;addr_contexts[2].prefix[1]=0x01;addr_contexts[2].prefix[2]=0x49;addr_contexts[2].prefix[3]=0x78,addr_contexts[2].prefix[4]=0x1d;addr_contexts[2].prefix[5]=0xb1;}
|
||||
|
||||
/* No radio cycling */
|
||||
/* 211 bytes per queue buffer */
|
||||
#define QUEUEBUF_CONF_NUM 8
|
||||
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 8
|
||||
|
||||
#define UIP_CONF_MAX_CONNECTIONS 8
|
||||
#define UIP_CONF_MAX_LISTENPORTS 8
|
||||
#define UIP_CONF_UDP_CONNS 4
|
||||
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define UIP_CONF_FWCACHE_SIZE 0
|
||||
|
||||
#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 1
|
||||
#define UIP_CONF_IPV6_REASSEMBLY 0
|
||||
|
||||
#define UIP_CONF_UDP_CHECKSUMS 1
|
||||
#define UIP_CONF_TCP_SPLIT 1
|
||||
#define UIP_CONF_DHCP_LIGHT 1
|
||||
|
||||
|
||||
#if 1 /* No radio cycling */
|
||||
|
||||
#define NETSTACK_CONF_MAC nullmac_driver
|
||||
#define NETSTACK_CONF_RDC sicslowmac_driver
|
||||
|
|
@ -108,11 +146,8 @@
|
|||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
//Most browsers reissue GETs after 3 seconds which stops frag reassembly, longer MAXAGE does no good
|
||||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
#define QUEUEBUF_CONF_NUM 1
|
||||
#define QUEUEBUF_CONF_REF_NUM 1
|
||||
|
||||
#elif 0
|
||||
/* Contiki-mac radio cycling */
|
||||
#elif 0 /* Contiki-mac radio cycling */
|
||||
#define NETSTACK_CONF_MAC nullmac_driver
|
||||
#define NETSTACK_CONF_RDC contikimac_driver
|
||||
#define NETSTACK_CONF_FRAMER framer_802154
|
||||
|
|
@ -120,9 +155,10 @@
|
|||
#define CHANNEL_802_15_4 26
|
||||
#define RF230_CONF_AUTOACK 0
|
||||
#define RF230_CONF_AUTORETRIES 0
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
|
||||
#elif 0
|
||||
/* cx-mac radio cycling */
|
||||
#elif 0 /* cx-mac radio cycling */
|
||||
#define NETSTACK_CONF_MAC nullmac_driver
|
||||
#define NETSTACK_CONF_RDC cxmac_driver
|
||||
#define NETSTACK_CONF_FRAMER framer_802154
|
||||
|
|
@ -133,8 +169,7 @@
|
|||
#define MAC_CONF_CHANNEL_CHECK_RATE 8
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
#define QUEUEBUF_CONF_NUM 4
|
||||
#define QUEUEBUF_CONF_REF_NUM 2
|
||||
|
||||
//Below will prevent fragmentation of TCP packets, undef for faster page loads, simpler wireshark captures
|
||||
//#define UIP_CONF_TCP_MSS 48
|
||||
//Below gives 10% duty cycle, undef for default 5%
|
||||
|
|
@ -149,33 +184,9 @@
|
|||
/* Logging adds 200 bytes to program size */
|
||||
#define LOG_CONF_ENABLED 1
|
||||
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 0
|
||||
|
||||
#define UIP_CONF_MAX_CONNECTIONS 2
|
||||
#define UIP_CONF_MAX_LISTENPORTS 2
|
||||
#define UIP_CONF_UDP_CONNS 2
|
||||
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define UIP_CONF_FWCACHE_SIZE 0
|
||||
|
||||
#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 1
|
||||
#define UIP_CONF_IPV6_REASSEMBLY 0
|
||||
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
||||
#define UIP_CONF_ND6_MAX_PREFIXES 3
|
||||
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
|
||||
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
|
||||
|
||||
#define UIP_CONF_UDP_CHECKSUMS 1
|
||||
#define UIP_CONF_TCP_SPLIT 1
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark RPL Settings
|
||||
/* ************************************************************************** */
|
||||
#if UIP_CONF_IPV6 //Allows hello-world ip4 to compile
|
||||
#define UIP_CONF_IPV6_RPL 0
|
||||
#endif
|
||||
#if UIP_CONF_IPV6_RPL
|
||||
|
||||
/* Define MAX_*X_POWER to reduce tx power and ignore weak rx packets for testing a miniature multihop network.
|
||||
|
|
@ -187,36 +198,15 @@
|
|||
* On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested.
|
||||
* These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm
|
||||
* and a 10 meter range to a full-sensitivity RF230 sniffer.
|
||||
#define RF230_MAX_TX_POWER 15
|
||||
#define RF230_MIN_RX_POWER 30
|
||||
*/
|
||||
//#define RF230_MAX_TX_POWER 15
|
||||
//#define RF230_MIN_RX_POWER 30
|
||||
|
||||
#define UIP_CONF_ROUTER 1
|
||||
|
||||
/* Handle 10 neighbors */
|
||||
#define UIP_CONF_DS6_NBR_NBU 10
|
||||
/* Handle 10 routes */
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 10
|
||||
|
||||
#define UIP_CONF_ND6_SEND_RA 0
|
||||
#define UIP_CONF_ND6_REACHABLE_TIME 600000
|
||||
#define UIP_CONF_ND6_RETRANS_TIMER 10000
|
||||
#undef UIP_CONF_IPV6_QUEUE_PKT
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 1
|
||||
//#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
||||
#define UIP_CONF_ND6_MAX_PREFIXES 3
|
||||
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
|
||||
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
//#define UIP_CONF_BUFFER_SIZE 240
|
||||
//#define UIP_CONF_ICMP_DEST_UNREACH 1
|
||||
//#define UIP_CONF_DHCP_LIGHT
|
||||
|
||||
#undef UIP_CONF_LLH_LEN
|
||||
#define UIP_CONF_LLH_LEN 0
|
||||
//#define UIP_CONF_RECEIVE_WINDOW 48
|
||||
//#define UIP_CONF_TCP_MSS 48
|
||||
#undef UIP_CONF_UDP_CONNS
|
||||
#define UIP_CONF_UDP_CONNS 12
|
||||
#undef UIP_CONF_FWCACHE_SIZE
|
||||
|
|
|
|||
|
|
@ -52,9 +52,11 @@
|
|||
/* ************************************************************************** */
|
||||
|
||||
/* MCU and clock rate */
|
||||
#define MCU_MHZ 8
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
#define RAVEN_REVISION RAVENUSB_C
|
||||
#ifndef F_CPU
|
||||
#define F_CPU 8000000UL
|
||||
#endif
|
||||
|
||||
/* Clock ticks per second */
|
||||
#define CLOCK_CONF_SECOND 125
|
||||
|
|
@ -73,20 +75,15 @@
|
|||
/* Maximum time interval (used for timers) */
|
||||
#define INFINITE_TIME 0xffff
|
||||
|
||||
/* COM port to be used for SLIP connection (not implemented on jackdaw) */
|
||||
/* COM port to be used for SLIP connection. Nnot tested on jackdaw. */
|
||||
#define SLIP_PORT RS232_PORT_0
|
||||
|
||||
/* Pre-allocated memory for loadable modules heap space (in bytes)*/
|
||||
#define MMEM_CONF_SIZE 256
|
||||
/* Default is 4096. Currently used only when elfloader is present. Not tested on Jackdaw */
|
||||
//#define MMEM_CONF_SIZE 256
|
||||
|
||||
/* Use the following address for code received via the codeprop facility */
|
||||
#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
/* Use Atmel 'Route Under MAC', currently just in sniffer mode! */
|
||||
//#define UIP_CONF_USE_RUM 1
|
||||
|
||||
#define CCIF
|
||||
#define CLIF
|
||||
/* Starting address for code received via the codeprop facility. Not tested on Jackdaw */
|
||||
//#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark USB Ethernet Hooks
|
||||
|
|
@ -146,45 +143,6 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
#define USB_CDC_ACM_HOOK_CLS_CHANGED(state) vcptx_end_led()
|
||||
#define USB_CDC_ACM_HOOK_CONFIGURED() vcptx_end_led()
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark UIP Settings
|
||||
/* ************************************************************************** */
|
||||
|
||||
//define UIP_CONF_IPV6 1 //Let the makefile do this, allows hello-world to compile
|
||||
#if UIP_CONF_IPV6
|
||||
#define UIP_CONF_ICMP6 1
|
||||
#define UIP_CONF_UDP 1
|
||||
#define UIP_CONF_TCP 1
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
||||
#else
|
||||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#endif
|
||||
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 14
|
||||
#define UIP_CONF_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN + 4 // +4 for vlan on macosx
|
||||
|
||||
#define UIP_CONF_MAX_CONNECTIONS 4
|
||||
#define UIP_CONF_MAX_LISTENPORTS 4
|
||||
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define UIP_CONF_FWCACHE_SIZE 0
|
||||
|
||||
#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 0
|
||||
#define UIP_CONF_IPV6_REASSEMBLY 0
|
||||
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
||||
#define UIP_CONF_ND6_MAX_PREFIXES 3
|
||||
#define UIP_CONF_ND6_MAX_NEIGHBORS 4
|
||||
#define UIP_CONF_ND6_MAX_DEFROUTERS 2
|
||||
|
||||
#define UIP_CONF_UDP_CHECKSUMS 1
|
||||
|
||||
#define UIP_CONF_TCP_SPLIT 1
|
||||
|
||||
#define UIP_CONF_STATISTICS 1
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark Serial Port Settings
|
||||
/* ************************************************************************** */
|
||||
|
|
@ -215,25 +173,71 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
/* Disable mass storage enumeration for more program space */
|
||||
//#define USB_CONF_STORAGE 1 /* TODO: Mass storage is currently broken */
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark RIME Settings
|
||||
/* ************************************************************************** */
|
||||
#define CCIF
|
||||
#define CLIF
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark UIP Settings
|
||||
/* ************************************************************************** */
|
||||
/* Network setup. The new NETSTACK interface requires RF230BB (as does ip4) */
|
||||
#if RF230BB
|
||||
#else
|
||||
#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 combined driver/mac handles headers internally
|
||||
#endif /*RF230BB */
|
||||
|
||||
#if UIP_CONF_IPV6
|
||||
#define RIMEADDR_CONF_SIZE 8
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark SICSLOWPAN Settings
|
||||
/* ************************************************************************** */
|
||||
|
||||
#define UIP_CONF_ICMP6 1
|
||||
#define UIP_CONF_UDP 1
|
||||
#define UIP_CONF_TCP 1
|
||||
#define UIP_CONF_IPV6_RPL 0
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
||||
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
|
||||
#ifdef RF230BB
|
||||
#define SICSLOWPAN_CONF_CONVENTIONAL_MAC 1 //for barebones driver, sicslowpan calls radio->read function
|
||||
#else
|
||||
/* ip4 should build but is thoroughly untested */
|
||||
#define RIMEADDR_CONF_SIZE 2
|
||||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
|
||||
/* Nothing after this will work with the original RF230 combined radio/mac driver! */
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark NETSTACK Settings
|
||||
/* ************************************************************************** */
|
||||
/* See uip-ds6.h */
|
||||
#define UIP_CONF_DS6_NBR_NBU 20
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 20
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 14
|
||||
#define UIP_CONF_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN + 4 // +4 for vlan on macosx
|
||||
|
||||
/* 10 bytes per stateful address context - see sicslowpan.c */
|
||||
/* These must agree with all the other nodes or there will be a failure to communicate! */
|
||||
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 3
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 {addr_contexts[0].prefix[0]=0xaa;addr_contexts[0].prefix[1]=0xaa;}
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_1 {addr_contexts[1].prefix[0]=0xbb;addr_contexts[1].prefix[1]=0xbb;}
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_2 {addr_contexts[2].prefix[0]=0x20;addr_contexts[2].prefix[1]=0x01;addr_contexts[2].prefix[2]=0x49;addr_contexts[2].prefix[3]=0x78,addr_contexts[2].prefix[4]=0x1d;addr_contexts[2].prefix[5]=0xb1;}
|
||||
|
||||
/* 211 bytes per queue buffer */
|
||||
#define QUEUEBUF_CONF_NUM 6
|
||||
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 1
|
||||
|
||||
#define UIP_CONF_MAX_CONNECTIONS 2
|
||||
#define UIP_CONF_MAX_LISTENPORTS 2
|
||||
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define UIP_CONF_FWCACHE_SIZE 0
|
||||
|
||||
#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 1
|
||||
#define UIP_CONF_IPV6_REASSEMBLY 0
|
||||
|
||||
#define UIP_CONF_UDP_CHECKSUMS 1
|
||||
#define UIP_CONF_TCP_SPLIT 1
|
||||
#define UIP_CONF_STATISTICS 1
|
||||
|
||||
#if 1 /* Network setup */
|
||||
/* No radio cycling */
|
||||
|
|
@ -244,10 +248,8 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
#define CHANNEL_802_15_4 26
|
||||
#define RF230_CONF_AUTOACK 1
|
||||
#define RF230_CONF_AUTORETRIES 2
|
||||
#define QUEUEBUF_CONF_NUM 1
|
||||
#define QUEUEBUF_CONF_REF_NUM 1
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
#define SICSLOWPAN_CONF_MAXAGE 5
|
||||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
|
||||
#elif 0
|
||||
/* Contiki-mac radio cycling */
|
||||
|
|
@ -284,9 +286,6 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
/* ************************************************************************** */
|
||||
//#pragma mark RPL Settings
|
||||
/* ************************************************************************** */
|
||||
#if UIP_CONF_IPV6 //Allows hello-world ip4 to compile
|
||||
#define UIP_CONF_IPV6_RPL 0
|
||||
#endif
|
||||
|
||||
#if UIP_CONF_IPV6_RPL
|
||||
|
||||
|
|
@ -310,12 +309,11 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
* On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested.
|
||||
* These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm
|
||||
* and a 10 meter range to a full-sensitivity RF230 sniffer.
|
||||
#define RF230_MAX_TX_POWER 15
|
||||
#define RF230_MIN_RX_POWER 30
|
||||
*/
|
||||
//#define RF230_MAX_TX_POWER 15
|
||||
//#define RF230_MIN_RX_POWER 30
|
||||
|
||||
#define UIP_CONF_ROUTER 1
|
||||
#define UIP_CONF_ROUTER_RECEIVE_RA 0
|
||||
#define RPL_BORDER_ROUTER 1
|
||||
#define RPL_CONF_STATS 0
|
||||
#define UIP_CONF_BUFFER_SIZE 1300
|
||||
|
|
@ -329,6 +327,10 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
|
||||
/* Save all the RAM we can */
|
||||
#define PROCESS_CONF_NO_PROCESS_NAMES 0
|
||||
#undef QUEUEBUF_CONF_NUM
|
||||
#define QUEUEBUF_CONF_NUM 2
|
||||
#undef QUEUEBUF_CONF_REF_NUM
|
||||
#define QUEUEBUF_CONF_REF_NUM 1
|
||||
#undef UIP_CONF_TCP_SPLIT
|
||||
#define UIP_CONF_TCP_SPLIT 0
|
||||
#undef UIP_CONF_STATISTICS
|
||||
|
|
@ -358,27 +360,31 @@ extern void mac_log_802_15_4_rx(const uint8_t* buffer, size_t total_len);
|
|||
#define UIP_CONF_MAX_CONNECTIONS 2
|
||||
#endif
|
||||
|
||||
|
||||
#define UIP_CONF_ICMP_DEST_UNREACH 1
|
||||
|
||||
#define UIP_CONF_DHCP_LIGHT
|
||||
#undef UIP_CONF_FWCACHE_SIZE
|
||||
#define UIP_CONF_FWCACHE_SIZE 30
|
||||
#define UIP_CONF_BROADCAST 1
|
||||
//#define UIP_ARCH_IPCHKSUM 1
|
||||
|
||||
/* Experimental option to pick up a prefix from host interface router advertisements */
|
||||
/* Requires changes in uip6 and uip-nd6.c to pass link-local RA broadcasts */
|
||||
/* If this is zero the prefix will be manually set in contiki-raven-main.c */
|
||||
#define UIP_CONF_ROUTER_RECEIVE_RA 0
|
||||
|
||||
#endif /* UIP_CONF_IPV6_RPL */
|
||||
#endif /* RF230BB */
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark Other Settings
|
||||
/* ************************************************************************** */
|
||||
|
||||
/* Route-Under-MAC uses 16-bit short addresses */
|
||||
/* Use Atmel 'Route Under MAC', currently just in sniffer mode! */
|
||||
//#define UIP_CONF_USE_RUM 1
|
||||
#if UIP_CONF_USE_RUM
|
||||
#undef UIP_CONF_LL_802154
|
||||
#define UIP_DATA_RUM_OFFSET 5
|
||||
#endif
|
||||
#endif /* UIP_CONF_USE_RUM */
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue