deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

CC2538: added support for SSI1

Browse source
This commit is contained in:
Ulf Knoblich 2015-03-18 19:43:02 +01:00 • committed by Ulf Knoblich
parent 60a301ef9f
commit a388a1bcd7
6 changed files with 487 additions and 173 deletions
Download patch file Download diff file Expand all files Collapse all files

116
platform/cc2538dk/dev/board.h
View file

@ -28,7 +28,7 @@
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
/**
* \addtogroup cc2538dk
* @{
*
@ -78,28 +78,28 @@
#undef LEDS_RED
#undef LEDS_CONF_ALL
#define LEDS_YELLOW 2 /**< LED2 (Yellow) -> PC1 */
#define LEDS_GREEN 4 /**< LED3 (Green) -> PC2 */
#define LEDS_ORANGE 8 /**< LED4 (Orange) -> PC3 */
#define LEDS_YELLOW 2 /**< LED2 (Yellow) -> PC1 */
#define LEDS_GREEN 4 /**< LED3 (Green) -> PC2 */
#define LEDS_ORANGE 8 /**< LED4 (Orange) -> PC3 */
#if USB_SERIAL_CONF_ENABLE
#define LEDS_CONF_ALL 14
#define LEDS_RED LEDS_ORANGE
#define LEDS_CONF_ALL 14
#define LEDS_RED LEDS_ORANGE
#else
#define LEDS_CONF_ALL 15
#define LEDS_RED 1 /**< LED1 (Red) -> PC0 */
#define LEDS_CONF_ALL 15
#define LEDS_RED 1 /**< LED1 (Red) -> PC0 */
#endif
/* Notify various examples that we have LEDs */
#define PLATFORM_HAS_LEDS 1
#define PLATFORM_HAS_LEDS 1
/** @} */
/*---------------------------------------------------------------------------*/
/** \name USB configuration
*
* The USB pullup is driven by PC0 and is shared with LED1
*/
#define USB_PULLUP_PORT GPIO_C_NUM
#define USB_PULLUP_PIN 0
#define USB_PULLUP_PORT GPIO_C_NUM
#define USB_PULLUP_PIN 0
/** @} */
/*---------------------------------------------------------------------------*/
/** \name UART configuration
@ -115,17 +115,17 @@
* UART1_* below.
* @{
*/
#define UART0_RX_PORT GPIO_A_NUM
#define UART0_RX_PIN 0
#define UART0_RX_PORT GPIO_A_NUM
#define UART0_RX_PIN 0
#define UART0_TX_PORT GPIO_A_NUM
#define UART0_TX_PIN 1
#define UART0_TX_PORT GPIO_A_NUM
#define UART0_TX_PIN 1
#define UART1_CTS_PORT GPIO_B_NUM
#define UART1_CTS_PIN 0
#define UART1_CTS_PORT GPIO_B_NUM
#define UART1_CTS_PIN 0
#define UART1_RTS_PORT GPIO_D_NUM
#define UART1_RTS_PIN 3
#define UART1_RTS_PORT GPIO_D_NUM
#define UART1_RTS_PIN 3
/** @} */
/*---------------------------------------------------------------------------*/
/** \name SmartRF Button configuration
@ -139,32 +139,32 @@
* @{
*/
/** BUTTON_SELECT -> PA3 */
#define BUTTON_SELECT_PORT GPIO_A_NUM
#define BUTTON_SELECT_PIN 3
#define BUTTON_SELECT_VECTOR NVIC_INT_GPIO_PORT_A
#define BUTTON_SELECT_PORT GPIO_A_NUM
#define BUTTON_SELECT_PIN 3
#define BUTTON_SELECT_VECTOR NVIC_INT_GPIO_PORT_A
/** BUTTON_LEFT -> PC4 */
#define BUTTON_LEFT_PORT GPIO_C_NUM
#define BUTTON_LEFT_PIN 4
#define BUTTON_LEFT_VECTOR NVIC_INT_GPIO_PORT_C
#define BUTTON_LEFT_PORT GPIO_C_NUM
#define BUTTON_LEFT_PIN 4
#define BUTTON_LEFT_VECTOR NVIC_INT_GPIO_PORT_C
/** BUTTON_RIGHT -> PC5 */
#define BUTTON_RIGHT_PORT GPIO_C_NUM
#define BUTTON_RIGHT_PIN 5
#define BUTTON_RIGHT_VECTOR NVIC_INT_GPIO_PORT_C
#define BUTTON_RIGHT_PORT GPIO_C_NUM
#define BUTTON_RIGHT_PIN 5
#define BUTTON_RIGHT_VECTOR NVIC_INT_GPIO_PORT_C
/** BUTTON_UP -> PC6 */
#define BUTTON_UP_PORT GPIO_C_NUM
#define BUTTON_UP_PIN 6
#define BUTTON_UP_VECTOR NVIC_INT_GPIO_PORT_C
#define BUTTON_UP_PORT GPIO_C_NUM
#define BUTTON_UP_PIN 6
#define BUTTON_UP_VECTOR NVIC_INT_GPIO_PORT_C
/** BUTTON_DOWN -> PC7 */
#define BUTTON_DOWN_PORT GPIO_C_NUM
#define BUTTON_DOWN_PIN 7
#define BUTTON_DOWN_VECTOR NVIC_INT_GPIO_PORT_C
#define BUTTON_DOWN_PORT GPIO_C_NUM
#define BUTTON_DOWN_PIN 7
#define BUTTON_DOWN_VECTOR NVIC_INT_GPIO_PORT_C
/* Notify various examples that we have Buttons */
#define PLATFORM_HAS_BUTTON 1
#define PLATFORM_HAS_BUTTON 1
/** @} */
/*---------------------------------------------------------------------------*/
/**
@ -176,23 +176,49 @@
* ADC inputs can only be on port A.
* @{
*/
#define ADC_ALS_PWR_PORT GPIO_A_NUM /**< ALS power GPIO control port */
#define ADC_ALS_PWR_PIN 7 /**< ALS power GPIO control pin */
#define ADC_ALS_OUT_PIN 6 /**< ALS output ADC input pin on port A */
#define ADC_ALS_PWR_PORT GPIO_A_NUM /**< ALS power GPIO control port */
#define ADC_ALS_PWR_PIN 7 /**< ALS power GPIO control pin */
#define ADC_ALS_OUT_PIN 6 /**< ALS output ADC input pin on port A */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name SPI configuration
*
* These values configure which CC2538 pins to use for the SPI lines.
* These values configure which CC2538 pins to use for the SPI lines. Both
* SPI instances can be used independently by providing the corresponding
* port / pin macros.
* @{
*/
#define SPI_CLK_PORT GPIO_A_NUM /**< Clock port */
#define SPI_CLK_PIN 2 /**< Clock pin */
#define SPI_MOSI_PORT GPIO_A_NUM /**< MOSI port */
#define SPI_MOSI_PIN 4 /**< MOSI pin */
#define SPI_MISO_PORT GPIO_A_NUM /**< MISO port */
#define SPI_MISO_PIN 5 /**< MISO pin */
#define SPI0_IN_USE 0
#define SPI1_IN_USE 0
#if SPI0_IN_USE
/** Clock port SPI0 */
#define SPI0_CLK_PORT GPIO_A_NUM
/** Clock pin SPI0 */
#define SPI0_CLK_PIN 2
/** TX port SPI0 (master mode: MOSI) */
#define SPI0_TX_PORT GPIO_A_NUM
/** TX pin SPI0 */
#define SPI0_TX_PIN 4
/** RX port SPI0 (master mode: MISO */
#define SPI0_RX_PORT GPIO_A_NUM
/** RX pin SPI0 */
#define SPI0_RX_PIN 5
#endif /* #if SPI0_IN_USE */
#if SPI1_IN_USE
/** Clock port SPI1 */
#define SPI1_CLK_PORT GPIO_A_NUM
/** Clock pin SPI1 */
#define SPI1_CLK_PIN 2
/** TX port SPI1 (master mode: MOSI) */
#define SPI1_TX_PORT GPIO_A_NUM
/** TX pin SPI1 */
#define SPI1_TX_PIN 4
/** RX port SPI1 (master mode: MISO) */
#define SPI1_RX_PORT GPIO_A_NUM
/** RX pin SPI1 */
#define SPI1_RX_PIN 5
#endif /* #if SPI1_IN_USE */
/** @} */
/*---------------------------------------------------------------------------*/
/**