add flasher
This commit is contained in:
parent
383a965c21
commit
a2b51b0e3c
|
@ -6,7 +6,7 @@ MC1322X := ..
|
|||
COBJS := tests.o put.o
|
||||
|
||||
# all of the target programs to build
|
||||
TARGETS := blink-red blink-green blink-blue blink-white blink-allio uart1-loopback nvm-read nvm-write romimg
|
||||
TARGETS := blink-red blink-green blink-blue blink-white blink-allio uart1-loopback nvm-read nvm-write romimg flasher
|
||||
|
||||
include $(MC1322X)/Makefile.include
|
||||
|
||||
|
|
|
@ -23,4 +23,10 @@
|
|||
#define DUMP_BASE 0x00000000
|
||||
#define DUMP_LEN 0x00014000
|
||||
|
||||
/* flasher */
|
||||
/* if both BOOT_OK and BOOT_SECURE are 0 then flash image will not be bootable */
|
||||
/* if both are 1 then flash image will be secure */
|
||||
#define BOOT_OK 1
|
||||
#define BOOT_SECURE 0
|
||||
|
||||
#endif
|
||||
|
|
111
tests/flasher.c
111
tests/flasher.c
|
@ -1,29 +1,8 @@
|
|||
#define GPIO_FUNC_SEL0 0x80000018 /* GPIO 15 - 0; 2 bit blocks */
|
||||
#include <mc1322x.h>
|
||||
#include <board.h>
|
||||
|
||||
#define BASE_UART1 0x80005000
|
||||
#define UART1_CON 0x80005000
|
||||
#define UART1_STAT 0x80005004
|
||||
#define UART1_DATA 0x80005008
|
||||
#define UR1CON 0x8000500c
|
||||
#define UT1CON 0x80005010
|
||||
#define UART1_CTS 0x80005014
|
||||
#define UART1_BR 0x80005018
|
||||
|
||||
#define GPIO_PAD_DIR0 0x80000000
|
||||
#define GPIO_DATA0 0x80000008
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "nvm.h"
|
||||
#include "maca.h"
|
||||
|
||||
#define reg(x) (*(volatile uint32_t *)(x))
|
||||
|
||||
#define DELAY 400000
|
||||
|
||||
/* if both BOOT_OK and BOOT_SECURE are 0 then flash image will not be bootable */
|
||||
/* if both are 1 then flash image will be secure */
|
||||
#define BOOT_OK 1
|
||||
#define BOOT_SECURE 0
|
||||
#include "tests.h"
|
||||
#include "config.h"
|
||||
|
||||
#define DEBUG 1
|
||||
#if DEBUG
|
||||
|
@ -40,16 +19,9 @@
|
|||
#define dbg_put_hex32(...)
|
||||
#endif
|
||||
|
||||
const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
|
||||
'8','9','a','b','c','d','e','f'};
|
||||
|
||||
uint8_t getc(void);
|
||||
void flushrx(void);
|
||||
uint32_t to_u32(char *c);
|
||||
|
||||
#include "isr.h"
|
||||
|
||||
#define NBYTES 16
|
||||
uint32_t to_u32(volatile uint32_t *c);
|
||||
|
||||
enum parse_states {
|
||||
SCAN_X,
|
||||
|
@ -58,35 +30,18 @@ enum parse_states {
|
|||
MAX_STATE,
|
||||
};
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
nvmType_t type=0;
|
||||
nvmErr_t err;
|
||||
volatile uint8_t c;
|
||||
volatile uint32_t buf[NBYTES/4];
|
||||
volatile uint32_t i;
|
||||
volatile uint32_t buf[4];
|
||||
volatile uint32_t len=0;
|
||||
volatile uint32_t state = SCAN_X;
|
||||
volatile uint32_t addr,data;
|
||||
|
||||
*(volatile uint32_t *)GPIO_PAD_DIR0 = 0x00000100;
|
||||
|
||||
/* Restore UART regs. to default */
|
||||
/* in case there is still bootloader state leftover */
|
||||
|
||||
reg(UART1_CON) = 0x0000c800; /* mask interrupts, 16 bit sample --- helps explain the baud rate */
|
||||
|
||||
/* INC = 767; MOD = 9999 works: 115200 @ 24 MHz 16 bit sample */
|
||||
#define INC 767
|
||||
#define MOD 9999
|
||||
reg(UART1_BR) = INC<<16 | MOD;
|
||||
|
||||
/* see Section 11.5.1.2 Alternate Modes */
|
||||
/* you must enable the peripheral first BEFORE setting the function in GPIO_FUNC_SEL */
|
||||
/* From the datasheet: "The peripheral function will control operation of the pad IF */
|
||||
/* THE PERIPHERAL IS ENABLED. */
|
||||
reg(UART1_CON) = 0x00000003; /* enable receive and transmit */
|
||||
reg(GPIO_FUNC_SEL0) = ( (0x01 << (14*2)) | (0x01 << (15*2)) ); /* set GPIO15-14 to UART (UART1 TX and RX)*/
|
||||
uart_init(INC, MOD);
|
||||
|
||||
vreg_init();
|
||||
|
||||
|
@ -155,7 +110,7 @@ void main(void) {
|
|||
/* for OTAP */
|
||||
for(i=0; i<len; i++) {
|
||||
c = getc();
|
||||
err = nvm_write(gNvmInternalInterface_c, type, &c, 8+i, 1);
|
||||
err = nvm_write(gNvmInternalInterface_c, type, (uint8_t *)&c, 8+i, 1);
|
||||
}
|
||||
|
||||
puts("flasher done\n\r");
|
||||
|
@ -180,10 +135,10 @@ void main(void) {
|
|||
if(state == PROCESS) {
|
||||
if(addr==0) {
|
||||
/*interpret the string as the starting address */
|
||||
addr = to_u32((uint8_t *)buf);
|
||||
addr = to_u32(buf);
|
||||
} else {
|
||||
/* string is data to write */
|
||||
data = to_u32((uint8_t *)buf);
|
||||
data = to_u32(buf);
|
||||
puts("writing addr ");
|
||||
put_hex32(addr);
|
||||
puts(" data ");
|
||||
|
@ -203,8 +158,8 @@ void main(void) {
|
|||
void flushrx(void)
|
||||
{
|
||||
volatile uint8_t c;
|
||||
while(reg(UR1CON) !=0) {
|
||||
c = reg(UART1_DATA);
|
||||
while(*UR1CON !=0) {
|
||||
c = *UART1_DATA;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -229,16 +184,16 @@ bad:
|
|||
return 32;
|
||||
}
|
||||
|
||||
uint32_t to_u32(char *c)
|
||||
uint32_t to_u32(volatile uint32_t *c)
|
||||
{
|
||||
volatile uint32_t ret=0;
|
||||
volatile uint32_t i,val;
|
||||
|
||||
/* c should be /x\d+,/ */
|
||||
i=1; /* skip x */
|
||||
while(c[i] != ',') {
|
||||
while(((uint8_t *)c)[i] != ',') {
|
||||
ret = ret<<4;
|
||||
val = from_hex(c[i++]);
|
||||
val = from_hex(((uint8_t *)c)[i++]);
|
||||
ret += val;
|
||||
}
|
||||
return ret;
|
||||
|
@ -247,41 +202,9 @@ uint32_t to_u32(char *c)
|
|||
uint8_t getc(void)
|
||||
{
|
||||
volatile uint8_t c;
|
||||
while(reg(UR1CON) == 0);
|
||||
while(*UR1CON == 0);
|
||||
|
||||
c = reg(UART1_DATA);
|
||||
c = *UART1_DATA;
|
||||
return c;
|
||||
}
|
||||
|
||||
|
||||
void putc(uint8_t c) {
|
||||
while(reg(UT1CON)==31); /* wait for there to be room in the buffer */
|
||||
reg(UART1_DATA) = c;
|
||||
}
|
||||
|
||||
void puts(uint8_t *s) {
|
||||
while(s && *s!=0) {
|
||||
putc(*s++);
|
||||
}
|
||||
}
|
||||
|
||||
void put_hex(uint8_t x)
|
||||
{
|
||||
putc(hex[x >> 4]);
|
||||
putc(hex[x & 15]);
|
||||
}
|
||||
|
||||
void put_hex16(uint16_t x)
|
||||
{
|
||||
put_hex((x >> 8) & 0xFF);
|
||||
put_hex((x) & 0xFF);
|
||||
}
|
||||
|
||||
void put_hex32(uint32_t x)
|
||||
{
|
||||
put_hex((x >> 24) & 0xFF);
|
||||
put_hex((x >> 16) & 0xFF);
|
||||
put_hex((x >> 8) & 0xFF);
|
||||
put_hex((x) & 0xFF);
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in a new issue