deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Adjust READMEs to point explicitly to the arm-gcc version used by travis

Browse source
This commit is contained in:
George Oikonomou 2016-01-24 13:53:54 +00:00
parent 0d0e44036b
commit 9e9e6d07b0
3 changed files with 22 additions and 32 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

20
platform/cc2538dk/README.md
View file

@ -66,21 +66,15 @@ The platform has been developed and tested under Windows XP, Mac OS X 10.9.1 and
Install a Toolchain Install a Toolchain
------------------- -------------------
The toolchain used to build contiki is arm-gcc, also used by other arm-based Contiki ports. If you are using Instant Contiki, you will have a version pre-installed in your system. To find out if this is the case, try this: The toolchain used to build contiki is arm-gcc, also used by other arm-based Contiki ports. If you are using Instant Contiki, you may have a version pre-installed in your system.
$ arm-none-eabi-gcc -v The platform is currently being used/tested with "GNU Tools for ARM Embedded Processors" (<https://launchpad.net/gcc-arm-embedded>). The current recommended version and the one being used by Contiki's regression tests on Travis is shown below.
Using built-in specs.
Target: arm-none-eabi
Configured with: /scratch/julian/lite-respin/eabi/src/gcc-4.3/configure
...
(skip)
...
Thread model: single
gcc version 4.3.2 (Sourcery G++ Lite 2008q3-66)
The platform is currently being used/tested with "GNU Tools for ARM Embedded Processors". This is the recommended version and the one being used by Contiki's regression tests on Travis. <https://launchpad.net/gcc-arm-embedded> $ arm-none-eabi-gcc --version
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 5.2.1 20151202 (release) [ARM/embedded-5-branch revision 231848]
The older version (Sourcery G++ Lite 2008q3-66) shown above should still work, but the port is no longer being tested with it. <http://sourcery.mentor.com/public/gnu_toolchain/arm-none-eabi> Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Drivers Drivers
------- -------

13
platform/srf06-cc26xx/README.md
View file

@ -58,12 +58,15 @@ To use the port you need:
Note that uploading over serial doesn't work for the Sensortag, you can use Note that uploading over serial doesn't work for the Sensortag, you can use
TI's SmartRF Flash Programmer in this case. TI's SmartRF Flash Programmer in this case.
* A toolchain to build firmware: The port has been developed and tested with * A toolchain to build firmware: The port has been developed and tested with
GNU Tools for ARM Embedded Processors <https://launchpad.net/gcc-arm-embedded>. GNU Tools for ARM Embedded Processors (<https://launchpad.net/gcc-arm-embedded>).
The port was developed and tested using this version: The current recommended version and the one being used by Contiki's regression
tests on Travis is shown below.
$ arm-none-eabi-gcc -v $ arm-none-eabi-gcc --version
[...] arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 5.2.1 20151202 (release) [ARM/embedded-5-branch revision 231848]
gcc version 4.9.3 20141119 (release) [ARM/embedded-4_9-branch revision 218278] (GNU Tools for ARM Embedded Processors) Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* srecord (http://srecord.sourceforge.net/) * srecord (http://srecord.sourceforge.net/)
* You may also need other drivers so that the SmartRF can communicate with your * You may also need other drivers so that the SmartRF can communicate with your

21
platform/zoul/README.md
View file

@ -74,22 +74,15 @@ To start using Contiki, the following is required:
Install a Toolchain Install a Toolchain
------------------- -------------------
The toolchain used to build contiki is arm-gcc, also used by other arm-based Contiki ports. If you are using Instant Contiki, you will have a version pre-installed in your system. To find out if this is the case, try this: The toolchain used to build contiki is arm-gcc, also used by other arm-based Contiki ports. If you are using Instant Contiki, you may have a version pre-installed in your system.
$ arm-none-eabi-gcc -v The platform is currently being used/tested with "GNU Tools for ARM Embedded Processors" (<https://launchpad.net/gcc-arm-embedded>). The current recommended version and the one being used by Contiki's regression tests on Travis is shown below.
Using built-in specs.
Target: arm-none-eabi
Configured with: /scratch/julian/lite-respin/eabi/src/gcc-4.3/configure
...
(skip)
...
Thread model: single
gcc version 4.3.2 (Sourcery G++ Lite 2008q3-66)
The platform is currently being used/tested with the following toolchains: $ arm-none-eabi-gcc --version
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 5.2.1 20151202 (release) [ARM/embedded-5-branch revision 231848]
* GNU Tools for ARM Embedded Processors. This is the recommended version. Works nicely on OS X. <https://launchpad.net/gcc-arm-embedded> Copyright (C) 2015 Free Software Foundation, Inc.
* Alternatively, you can use this older version for Linux. At the time of writing, this is the version used by Contiki's regression tests. <https://sourcery.mentor.com/public/gnu_toolchain/arm-none-eabi/arm-2008q3-66-arm-none-eabi-i686-pc-linux-gnu.tar.bz2> This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Drivers Drivers
------- -------