deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

remove debug code

Browse source
This commit is contained in:
Harald Pichler 2013-04-17 13:44:17 +02:00
parent 245d801862
commit 88ae1828f9
5 changed files with 23 additions and 23 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
platform/osd-merkur/dev/button-sensor.c
View file

@ -14,22 +14,22 @@ static int enabled = 0;
struct sensors_sensor *sensors[1];
unsigned char sensors_flags[1];
#define BUTTON_BIT INTF5
#define BUTTON_BIT INTF4
#define BUTTON_CHECK_IRQ() (EIFR & BUTTON_BIT) ? 0 : 1
#define PRINTF(...) printf(__VA_ARGS__)
/*---------------------------------------------------------------------------*/
ISR(INT5_vect)
ISR(INT4_vect)
{
// leds_toggle(LEDS_YELLOW);
// leds_toggle(LEDS_RED);
if(BUTTON_CHECK_IRQ()) {
if(timer_expired(&debouncetimer)) {
led1_on();
// led1_on();
timer_set(&debouncetimer, CLOCK_SECOND / 4);
sensors_changed(&button_sensor);
led1_off();
// led1_off();
}
}
@ -39,7 +39,7 @@ ISR(INT5_vect)
static int
value(int type)
{
return (PORTE & _BV(PE5) ? 0 : 1) || !timer_expired(&debouncetimer);
return (PORTE & _BV(PE4) ? 0 : 1) || !timer_expired(&debouncetimer);
//return 0;
}
@ -50,19 +50,19 @@ configure(int type, int c)
case SENSORS_ACTIVE:
if (c) {
if(!status(SENSORS_ACTIVE)) {
led1_on();
// led1_on();
timer_set(&debouncetimer, 0);
DDRE |= (0<<DDE5); // Set pin as input
PORTE |= (1<<PORTE5); // Set port PORTE bint 5 with pullup resistor
EICRB |= (2<<ISC50); // For falling edge
EIMSK |= (1<<INT5); // Set int
DDRE |= (0<<DDE4); // Set pin as input
PORTE |= (1<<PORTE4); // Set port PORTE bint 5 with pullup resistor
EICRB |= (1<<ISC40); // For falling edge
EIMSK |= (1<<INT4); // Set int
enabled = 1;
sei();
led1_off();
// led1_off();
}
} else {
enabled = 0;
EIMSK &= ~(1<<INT5); // clear int
EIMSK &= ~(1<<INT4); // clear int
}
return 1;
}

8
platform/osd-merkur/dev/dht11.c
View file

@ -83,16 +83,16 @@ uint8_t DHT_Read_Data(uint8_t select){
//Shift data[] value 1 position left
//Example. 01010100 if we shift it left one time it will be
//10101000
led1_on();
// led1_on();
data[j/8]<<=1;
if (counter >= 15) { //If it was high for more than 40uS
led1_off();
// led1_off();
data[j/8]|=1; //it means it is bit '1' so make a logic
led1_on();
// led1_on();
} //OR with the value (save it)
j++; //making an OR by 1 to this value 10101000
led1_off();
// led1_off();
} //we will have the resault 10101001
//1 in 8-bit binary is 00000001

2
platform/osd-merkur/dev/leds-arch.c
View file

@ -50,7 +50,7 @@
void
leds_arch_init(void)
{
DDRE|=(1<<DDE2) | (1<<DDE3) | (1<<DDE4); // Set pins as output since leds are mounted on the VDD bus
DDRE|=(1<<DDE2) | (1<<DDE3) | (1<<DDE5); // Set pins as output since leds are mounted on the VDD bus
LEDS_OFF();
}
/*---------------------------------------------------------------------------*/

2
platform/osd-merkur/dev/leds-arch.h
View file

@ -5,7 +5,7 @@
#define BIT_GREEN _BV(PE2)
#define BIT_YELLOW _BV(PE3)
#define BIT_RED _BV(PE4)
#define BIT_RED _BV(PE5)
#define BIT_BLUE BIT_YELLOW
#define LED_GREEN_ON() LED_OUT &= ~BIT_GREEN

8
platform/osd-merkur/dev/pir-sensor.c
View file

@ -26,10 +26,10 @@ ISR(INT6_vect)
if(PIR_CHECK_IRQ()) {
if(timer_expired(&debouncetimer)) {
led1_on();
// led1_on();
timer_set(&debouncetimer, CLOCK_SECOND / 4);
sensors_changed(&pir_sensor);
led1_off();
// led1_off();
}
}
@ -50,7 +50,7 @@ configure(int type, int c)
case SENSORS_ACTIVE:
if (c) {
if(!status(SENSORS_ACTIVE)) {
led1_on();
// led1_on();
timer_set(&debouncetimer, 0);
DDRE |= (0<<DDE6); // Set pin as input
PORTE |= (1<<PORTE6); // Set port PORTE bint 6 with pullup resistor
@ -58,7 +58,7 @@ configure(int type, int c)
EIMSK |= (1<<INT6); // Set int
enabled = 1;
sei();
led1_off();
// led1_off();
}
} else {
enabled = 0;