initial check in
This commit is contained in:
Marcus Priesch
Ralf Schlatterbeck
parent
088c7118e0
commit
85d29b6473
93
examples/osd/dual-rgbw-actor/Makefile
Normal file
93
examples/osd/dual-rgbw-actor/Makefile
Normal file
|
|
@ -0,0 +1,93 @@
|
|||
all: er-example-server
|
||||
# use this target explicitly if requried: er-plugtest-server
|
||||
|
||||
# variable for this Makefile
|
||||
# configure CoAP implementation (3|7|12|13) (er-coap-07 also supports CoAP draft 08)
|
||||
WITH_COAP=13
|
||||
|
||||
# for some platforms
|
||||
UIP_CONF_IPV6=1
|
||||
# IPv6 make config disappeared completely
|
||||
CFLAGS += -DUIP_CONF_IPV6=1
|
||||
|
||||
CONTIKI=../../..
|
||||
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
|
||||
|
||||
# variable for Makefile.include
|
||||
ifneq ($(TARGET), minimal-net)
|
||||
CFLAGS += -DUIP_CONF_IPV6_RPL=1
|
||||
else
|
||||
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
|
||||
${info INFO: compiling without RPL}
|
||||
CFLAGS += -DUIP_CONF_IPV6_RPL=0
|
||||
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
|
||||
${info INFO: compiling with large buffers}
|
||||
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
|
||||
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
|
||||
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
|
||||
endif
|
||||
|
||||
# linker optimizations
|
||||
SMALL=1
|
||||
|
||||
# REST framework, requires WITH_COAP
|
||||
ifeq ($(WITH_COAP), 13)
|
||||
${info INFO: compiling with CoAP-13}
|
||||
CFLAGS += -DWITH_COAP=13
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-13
|
||||
else ifeq ($(WITH_COAP), 12)
|
||||
${info INFO: compiling with CoAP-12}
|
||||
CFLAGS += -DWITH_COAP=12
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-12
|
||||
else ifeq ($(WITH_COAP), 7)
|
||||
${info INFO: compiling with CoAP-08}
|
||||
CFLAGS += -DWITH_COAP=7
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-07
|
||||
else ifeq ($(WITH_COAP), 3)
|
||||
${info INFO: compiling with CoAP-03}
|
||||
CFLAGS += -DWITH_COAP=3
|
||||
CFLAGS += -DREST=coap_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=0
|
||||
APPS += er-coap-03
|
||||
else
|
||||
${info INFO: compiling with HTTP}
|
||||
CFLAGS += -DWITH_HTTP
|
||||
CFLAGS += -DREST=http_rest_implementation
|
||||
CFLAGS += -DUIP_CONF_TCP=1
|
||||
APPS += er-http-engine
|
||||
endif
|
||||
|
||||
APPS += erbium
|
||||
|
||||
# optional rules to get assembly
|
||||
#CUSTOM_RULE_C_TO_OBJECTDIR_O = 1
|
||||
#CUSTOM_RULE_S_TO_OBJECTDIR_O = 1
|
||||
|
||||
include $(CONTIKI)/Makefile.include
|
||||
|
||||
# optional rules to get assembly
|
||||
#$(OBJECTDIR)/%.o: asmdir/%.S
|
||||
# $(CC) $(CFLAGS) -MMD -c $< -o $@
|
||||
# @$(FINALIZE_DEPENDENCY)
|
||||
#
|
||||
#asmdir/%.S: %.c
|
||||
# $(CC) $(CFLAGS) -MMD -S $< -o $@
|
||||
|
||||
# border router rules
|
||||
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
|
||||
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
|
||||
|
||||
connect-router: $(CONTIKI)/tools/tunslip6
|
||||
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
|
||||
|
||||
connect-router-cooja: $(CONTIKI)/tools/tunslip6
|
||||
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
|
||||
|
||||
connect-minimal:
|
||||
sudo ip address add fdfd::1/64 dev tap0
|
||||
76
examples/osd/dual-rgbw-actor/README
Normal file
76
examples/osd/dual-rgbw-actor/README
Normal file
|
|
@ -0,0 +1,76 @@
|
|||
A Quick Introduction to the Erbium (Er) REST Engine
|
||||
===================================================
|
||||
Compile the Example
|
||||
-------------------
|
||||
./run.sh
|
||||
|
||||
OSD-Merkur Board
|
||||
----------------------
|
||||
write the images to the OSD-Merkur Board:
|
||||
|
||||
./flash.sh
|
||||
|
||||
EXAMPLE FILES
|
||||
-------------
|
||||
er-example-server.c: A RESTful server example showing how to use the REST layer to develop server-side applications (at the moment only CoAP is implemented for the REST Engine).
|
||||
er-example-client.c: A CoAP client that polls the /actuators/toggle resource every 10 seconds and cycles through 4 resources on button press (target address is hard-coded).
|
||||
er-plugtest-server.c: The server used for draft compliance testing at ETSI IoT CoAP Plugtest in Paris, France, March 2012 (configured for minimal-net).
|
||||
|
||||
PRELIMINARIES
|
||||
-------------
|
||||
- Make sure rpl-border-router has the same stack and fits into mote memory:
|
||||
You can disable RDC in border-router project-conf.h (not really required as BR keeps radio turned on).
|
||||
#undef NETSTACK_CONF_RDC
|
||||
#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
- For convenience, define the Cooja addresses in /etc/hosts
|
||||
aaaa::0212:7401:0001:0101 cooja1
|
||||
aaaa::0212:7402:0002:0202 cooja2
|
||||
...
|
||||
- Get the Copper (Cu) CoAP user-agent from https://addons.mozilla.org/en-US/firefox/addon/copper-270430/
|
||||
- Optional: Save your target as default target
|
||||
$ make TARGET=sky savetarget
|
||||
|
||||
COOJA HOWTO
|
||||
-----------
|
||||
Server only:
|
||||
1) $ make TARGET=cooja server-only.csc
|
||||
2) Open new terminal
|
||||
3) $ make connect-router-cooja
|
||||
4) Start Copper and discover resources at coap://cooja2:5683/
|
||||
- Choose "Click button on Sky 2" from the context menu of mote 2 (server) after requesting /test/separate
|
||||
- Do the same when observing /test/event
|
||||
|
||||
With client:
|
||||
1) $ make TARGET=cooja server-client.csc
|
||||
2) Open new terminal
|
||||
3) $ make connect-router-cooja
|
||||
4) Wait until red LED toggles on mote 2 (server)
|
||||
5) Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output
|
||||
|
||||
DETAILS
|
||||
-------
|
||||
Erbium currently implements draft 08 (name "er-coap-07" stems from last technical draft changes).
|
||||
Central features are commented in er-example-server.c.
|
||||
In general, apps/er-coap-07 supports:
|
||||
* All draft 08 header options
|
||||
* CON Retransmissions (note COAP_MAX_OPEN_TRANSACTIONS)
|
||||
* Blockwise Transfers (note REST_MAX_CHUNK_SIZE, see er-plugtest-server.c for Block1 uploads)
|
||||
* Separate Responses (no rest_set_pre_handler() required anymore, note coap_separate_accept(), _reject(), and _resume())
|
||||
* Resource Discovery
|
||||
* Observing Resources (see EVENT_ and PRERIODIC_RESOURCE, note COAP_MAX_OBSERVERS)
|
||||
|
||||
REST IMPLEMENTATIONS
|
||||
--------------------
|
||||
The Makefile uses WITH_COAP to configure different implementations for the Erbium (Er) REST Engine.
|
||||
* WITH_COAP=7 uses Erbium CoAP 08 apps/er-coap-07/.
|
||||
The default port for coap-07/-08 is 5683.
|
||||
* WITH_COAP=3 uses Erbium CoAP 03 apps/er-coap-03/.
|
||||
The default port for coap-03 is 61616.
|
||||
er-coap-03 produces some warnings, as it not fully maintained anymore.
|
||||
* WITH_COAP=0 is a stub to link an Erbium HTTP engine that uses the same resource abstraction (REST.x() functions and RESOURCE macros.
|
||||
|
||||
TODOs
|
||||
-----
|
||||
* Observe client
|
||||
* Multiple If-Match ETags
|
||||
* (Message deduplication)
|
||||
BIN
examples/osd/dual-rgbw-actor/doc/ledStripe_board_btm.pdf
Normal file
BIN
examples/osd/dual-rgbw-actor/doc/ledStripe_board_btm.pdf
Normal file
Binary file not shown.
BIN
examples/osd/dual-rgbw-actor/doc/ledStripe_schematics.pdf
Normal file
BIN
examples/osd/dual-rgbw-actor/doc/ledStripe_schematics.pdf
Normal file
Binary file not shown.
265
examples/osd/dual-rgbw-actor/er-example-server.c
Normal file
265
examples/osd/dual-rgbw-actor/er-example-server.c
Normal file
|
|
@ -0,0 +1,265 @@
|
|||
/*
|
||||
* Copyright (C) 2011-2014, Matthias Kovatsch and other contributors.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*/
|
||||
|
||||
/**
|
||||
* \file
|
||||
* Erbium (Er) Dual RGBW Led REST Engine example (with CoAP-specific code)
|
||||
* \author
|
||||
* Matthias Kovatsch <kovatsch@inf.ethz.ch>
|
||||
* Harald Pichler <harald@the-develop.net>
|
||||
* Marcus Priesch <marcus@priesch.co.at>
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include "contiki.h"
|
||||
#include "contiki-net.h"
|
||||
#include "erbium.h"
|
||||
|
||||
#include "dev/t4-servo-sensor.h"
|
||||
|
||||
/* For CoAP-specific example: not required for normal RESTful Web service. */
|
||||
#if WITH_COAP == 3
|
||||
#include "er-coap-03.h"
|
||||
#elif WITH_COAP == 7
|
||||
#include "er-coap-07.h"
|
||||
#elif WITH_COAP == 12
|
||||
#include "er-coap-12.h"
|
||||
#elif WITH_COAP == 13
|
||||
#include "er-coap-13.h"
|
||||
#else
|
||||
#warning "Erbium example without CoAP-specifc functionality"
|
||||
#endif /* CoAP-specific example */
|
||||
|
||||
#define DEBUG 1
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x]", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
|
||||
#define PRINTLLADDR(lladdr) PRINTF("[%02x:%02x:%02x:%02x:%02x:%02x]",(lladdr)->addr[0], (lladdr)->addr[1], (lladdr)->addr[2], (lladdr)->addr[3],(lladdr)->addr[4], (lladdr)->addr[5])
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#define PRINT6ADDR(addr)
|
||||
#define PRINTLLADDR(addr)
|
||||
#endif
|
||||
|
||||
/******************************************************************************/
|
||||
/*
|
||||
* Resources are defined by the RESOURCE macro.
|
||||
* Signature: resource name, the RESTful methods it handles, and its URI path (omitting the leading slash).
|
||||
*/
|
||||
RESOURCE(info, METHOD_GET, "info", "title=\"Info\";rt=\"text\"");
|
||||
|
||||
/*
|
||||
* A handler function named [resource name]_handler must be implemented for each RESOURCE.
|
||||
* A buffer for the response payload is provided through the buffer pointer. Simple resources can ignore
|
||||
* preferred_size and offset, but must respect the REST_MAX_CHUNK_SIZE limit for the buffer.
|
||||
* If a smaller block size is requested for CoAP, the REST framework automatically splits the data.
|
||||
*/
|
||||
void
|
||||
info_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
char message[100];
|
||||
int index = 0;
|
||||
int length = 0; /* |<-------->| */
|
||||
|
||||
/* Some data that has the length up to REST_MAX_CHUNK_SIZE. For more, see the chunk resource. */
|
||||
// jSON Format
|
||||
index += sprintf(message + index,"{\n \"Version\" : \"V1.0pre1\",\n");
|
||||
index += sprintf(message + index," \"name\" : \"Dual RGBW Led Actor\"\n");
|
||||
index += sprintf(message + index,"}\n");
|
||||
|
||||
length = strlen(message);
|
||||
memcpy(buffer, message,length );
|
||||
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
}
|
||||
|
||||
RESOURCE(t4_servo, METHOD_GET | METHOD_PUT , "a/dual_rgbw_led", "title=\"Dual RGBW Led Actor\";rt=\"dual_rgbw_led\"");
|
||||
void
|
||||
t4_servo_handler(void* request, void* response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
|
||||
{
|
||||
int success = 1;
|
||||
|
||||
char temp[100];
|
||||
int index = 0;
|
||||
int length = 0;
|
||||
const char *value = NULL;
|
||||
size_t len = 0;
|
||||
|
||||
int r1 = t4_servo_sensor.value(0);
|
||||
int g1 = t4_servo_sensor.value(1);
|
||||
int b1 = t4_servo_sensor.value(2);
|
||||
int w1 = t4_servo_sensor.value(3);
|
||||
int r2 = t4_servo_sensor.value(4);
|
||||
int g2 = t4_servo_sensor.value(5);
|
||||
int b2 = t4_servo_sensor.value(6);
|
||||
int w2 = t4_servo_sensor.value(7);
|
||||
|
||||
switch(REST.get_method_type(request)){
|
||||
case METHOD_GET:
|
||||
// jSON Format
|
||||
index += sprintf(temp + index,"{\"r1\":%d,", r1);
|
||||
index += sprintf(temp + index, "\"g1\":%d,", g1);
|
||||
index += sprintf(temp + index, "\"b1\":%d,", b1);
|
||||
index += sprintf(temp + index, "\"w1\":%d,", w1);
|
||||
index += sprintf(temp + index, "\"r2\":%d,", r2);
|
||||
index += sprintf(temp + index, "\"g2\":%d,", g2);
|
||||
index += sprintf(temp + index, "\"b2\":%d,", b2);
|
||||
index += sprintf(temp + index, "\"w2\":%d,", w2);
|
||||
index += sprintf(temp + index,"}\n");
|
||||
|
||||
length = strlen(temp);
|
||||
memcpy(buffer, temp, length);
|
||||
|
||||
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
|
||||
REST.set_response_payload(response, buffer, length);
|
||||
|
||||
break;
|
||||
|
||||
case METHOD_POST:
|
||||
success = 0;
|
||||
break;
|
||||
|
||||
case METHOD_PUT:
|
||||
// Note that we have to set all at once:
|
||||
// red=255&green=255&blue=255&white=255
|
||||
// otherwise we get "bad request"
|
||||
if (success && (len=REST.get_post_variable(request, "r1", &value))) {
|
||||
t4_servo_sensor.configure(0,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "g1", &value))) {
|
||||
t4_servo_sensor.configure(1,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "b1", &value))) {
|
||||
t4_servo_sensor.configure(2,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "w1", &value))) {
|
||||
t4_servo_sensor.configure(3,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "r2", &value)))
|
||||
{
|
||||
t4_servo_sensor.configure(4,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "g2", &value))) {
|
||||
t4_servo_sensor.configure(5,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "b2", &value))) {
|
||||
t4_servo_sensor.configure(6,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (success && (len=REST.get_post_variable(request, "w2", &value))) {
|
||||
t4_servo_sensor.configure(7,(unsigned char) atoi(value));
|
||||
} else {
|
||||
success = 0;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
success = 0;
|
||||
}
|
||||
|
||||
if (!success) {
|
||||
REST.set_response_status(response, REST.status.BAD_REQUEST);
|
||||
}
|
||||
}
|
||||
|
||||
void
|
||||
hw_init()
|
||||
{
|
||||
}
|
||||
|
||||
PROCESS(rest_server_example, "Erbium Example Server");
|
||||
|
||||
AUTOSTART_PROCESSES(&rest_server_example, &sensors_process);
|
||||
|
||||
PROCESS_THREAD(rest_server_example, ev, data)
|
||||
{
|
||||
PROCESS_BEGIN();
|
||||
PRINTF("Starting Erbium Example Server\n");
|
||||
|
||||
#ifdef RF_CHANNEL
|
||||
PRINTF("RF channel: %u\n", RF_CHANNEL);
|
||||
#endif
|
||||
#ifdef IEEE802154_PANID
|
||||
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
|
||||
#endif
|
||||
|
||||
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
|
||||
PRINTF("LL header: %u\n", UIP_LLH_LEN);
|
||||
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
|
||||
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
|
||||
|
||||
/* if static routes are used rather than RPL */
|
||||
#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE)
|
||||
set_global_address();
|
||||
configure_routing();
|
||||
#endif
|
||||
|
||||
/* Initialize the OSD Hardware. */
|
||||
hw_init();
|
||||
/* Initialize the REST engine. */
|
||||
rest_init_engine();
|
||||
|
||||
/* Activate the application-specific resources. */
|
||||
rest_activate_resource(&resource_info);
|
||||
|
||||
SENSORS_ACTIVATE(t4_servo_sensor);
|
||||
rest_activate_resource(&resource_t4_servo);
|
||||
|
||||
/* Define application-specific events here. */
|
||||
while(1) {
|
||||
PROCESS_WAIT_EVENT();
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
2
examples/osd/dual-rgbw-actor/flash.sh
Executable file
2
examples/osd/dual-rgbw-actor/flash.sh
Executable file
|
|
@ -0,0 +1,2 @@
|
|||
#!/bin/bash
|
||||
avrdude -V -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-server.osd-merkur.hex:a -U eeprom:w:er-example-server.osd-merkur.eep:a
|
||||
99
examples/osd/dual-rgbw-actor/project-conf.h
Normal file
99
examples/osd/dual-rgbw-actor/project-conf.h
Normal file
|
|
@ -0,0 +1,99 @@
|
|||
/*
|
||||
* Copyright (C) 2010-2014, Swedish Institute of Computer Science.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __PROJECT_RPL_WEB_CONF_H__
|
||||
#define __PROJECT_RPL_WEB_CONF_H__
|
||||
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
|
||||
/* Dont allow MCU sleeping between channel checks */
|
||||
#undef RDC_CONF_MCU_SLEEP
|
||||
#define RDC_CONF_MCU_SLEEP 0
|
||||
|
||||
/* Some platforms have weird includes. */
|
||||
#undef IEEE802154_CONF_PANID
|
||||
|
||||
/* Disabling RDC for demo purposes. Core updates often require more memory. */
|
||||
/* For projects, optimize memory and enable RDC again. */
|
||||
// #undef NETSTACK_CONF_RDC
|
||||
//#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
|
||||
/* Increase rpl-border-router IP-buffer when using more than 64. */
|
||||
#undef REST_MAX_CHUNK_SIZE
|
||||
#define REST_MAX_CHUNK_SIZE 64
|
||||
|
||||
/* Estimate your header size, especially when using Proxy-Uri. */
|
||||
/*
|
||||
#undef COAP_MAX_HEADER_SIZE
|
||||
#define COAP_MAX_HEADER_SIZE 70
|
||||
*/
|
||||
|
||||
/* The IP buffer size must fit all other hops, in particular the border router. */
|
||||
|
||||
#undef UIP_CONF_BUFFER_SIZE
|
||||
#define UIP_CONF_BUFFER_SIZE 512
|
||||
|
||||
|
||||
/* Multiplies with chunk size, be aware of memory constraints. */
|
||||
#undef COAP_MAX_OPEN_TRANSACTIONS
|
||||
#define COAP_MAX_OPEN_TRANSACTIONS 8
|
||||
|
||||
/* Must be <= open transaction number, default is COAP_MAX_OPEN_TRANSACTIONS-1. */
|
||||
/*
|
||||
#undef COAP_MAX_OBSERVERS
|
||||
#define COAP_MAX_OBSERVERS 2
|
||||
*/
|
||||
|
||||
/* Filtering .well-known/core per query can be disabled to save space. */
|
||||
/*
|
||||
#undef COAP_LINK_FORMAT_FILTERING
|
||||
#define COAP_LINK_FORMAT_FILTERING 0
|
||||
*/
|
||||
|
||||
/* Save some memory for the sky platform. */
|
||||
/*
|
||||
#undef NBR_TABLE_CONF_MAX_NEIGHBORS
|
||||
#define NBR_TABLE_CONF_MAX_NEIGHBORS 10
|
||||
#undef UIP_CONF_MAX_ROUTES
|
||||
#define UIP_CONF_MAX_ROUTES 10
|
||||
*/
|
||||
|
||||
/* Reduce 802.15.4 frame queue to save RAM. */
|
||||
/*
|
||||
#undef QUEUEBUF_CONF_NUM
|
||||
#define QUEUEBUF_CONF_NUM 4
|
||||
*/
|
||||
|
||||
/*
|
||||
#undef SICSLOWPAN_CONF_FRAG
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
*/
|
||||
#endif /* PROJECT_ERBIUM_CONF_H_ */
|
||||
6
examples/osd/dual-rgbw-actor/run.sh
Executable file
6
examples/osd/dual-rgbw-actor/run.sh
Executable file
|
|
@ -0,0 +1,6 @@
|
|||
#!/bin/bash
|
||||
#make clean TARGET=osd-merkur
|
||||
make -j TARGET=osd-merkur
|
||||
#avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur
|
||||
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex
|
||||
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep
|
||||
227
examples/osd/dual-rgbw-actor/server-client.csc
Normal file
227
examples/osd/dual-rgbw-actor/server-client.csc
Normal file
|
|
@ -0,0 +1,227 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<simconf>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/mrm</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/mspsim</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/avrora</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/serial_socket</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/collect-view</project>
|
||||
<simulation>
|
||||
<title>REST with RPL router</title>
|
||||
<delaytime>-2147483648</delaytime>
|
||||
<randomseed>123456</randomseed>
|
||||
<motedelay_us>1000000</motedelay_us>
|
||||
<radiomedium>
|
||||
se.sics.cooja.radiomediums.UDGM
|
||||
<transmitting_range>50.0</transmitting_range>
|
||||
<interference_range>50.0</interference_range>
|
||||
<success_ratio_tx>1.0</success_ratio_tx>
|
||||
<success_ratio_rx>1.0</success_ratio_rx>
|
||||
</radiomedium>
|
||||
<events>
|
||||
<logoutput>40000</logoutput>
|
||||
</events>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>rplroot</identifier>
|
||||
<description>Sky RPL Root</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c</source>
|
||||
<commands EXPORT="discard">make border-router.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>server</identifier>
|
||||
<description>Erbium Server</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.c</source>
|
||||
<commands EXPORT="discard">make er-example-server.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>client</identifier>
|
||||
<description>Erbium Client</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-client.c</source>
|
||||
<commands EXPORT="discard">make er-example-client.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-client.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>33.260163187353555</x>
|
||||
<y>30.643217359962595</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>1</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>rplroot</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>46.57186415376375</x>
|
||||
<y>40.35946215910942</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>2</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>server</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>18.638049428485125</x>
|
||||
<y>47.55034515769599</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>3</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>client</motetype_identifier>
|
||||
</mote>
|
||||
</simulation>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.SimControl
|
||||
<width>259</width>
|
||||
<z>0</z>
|
||||
<height>179</height>
|
||||
<location_x>0</location_x>
|
||||
<location_y>0</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.Visualizer
|
||||
<plugin_config>
|
||||
<skin>se.sics.cooja.plugins.skins.IDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.UDGMVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AttributeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.LEDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AddressVisualizerSkin</skin>
|
||||
<viewport>3.61568947862321 0.0 0.0 3.61568947862321 15.610600779367 -85.92728269158351</viewport>
|
||||
</plugin_config>
|
||||
<width>300</width>
|
||||
<z>2</z>
|
||||
<height>178</height>
|
||||
<location_x>261</location_x>
|
||||
<location_y>1</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.LogListener
|
||||
<plugin_config>
|
||||
<filter />
|
||||
<coloring />
|
||||
</plugin_config>
|
||||
<width>762</width>
|
||||
<z>3</z>
|
||||
<height>491</height>
|
||||
<location_x>2</location_x>
|
||||
<location_y>182</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.RadioLogger
|
||||
<plugin_config>
|
||||
<split>150</split>
|
||||
<analyzers name="6lowpan" />
|
||||
</plugin_config>
|
||||
<width>451</width>
|
||||
<z>-1</z>
|
||||
<height>305</height>
|
||||
<location_x>73</location_x>
|
||||
<location_y>140</location_y>
|
||||
<minimized>true</minimized>
|
||||
</plugin>
|
||||
<plugin>
|
||||
SerialSocketServer
|
||||
<mote_arg>0</mote_arg>
|
||||
<width>422</width>
|
||||
<z>4</z>
|
||||
<height>74</height>
|
||||
<location_x>578</location_x>
|
||||
<location_y>18</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.TimeLine
|
||||
<plugin_config>
|
||||
<mote>0</mote>
|
||||
<mote>1</mote>
|
||||
<mote>2</mote>
|
||||
<showRadioRXTX />
|
||||
<showRadioHW />
|
||||
<showLEDs />
|
||||
<showWatchpoints />
|
||||
<split>125</split>
|
||||
<zoomfactor>25.49079397896416</zoomfactor>
|
||||
</plugin_config>
|
||||
<width>1624</width>
|
||||
<z>5</z>
|
||||
<height>252</height>
|
||||
<location_x>6</location_x>
|
||||
<location_y>712</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.MoteInterfaceViewer
|
||||
<mote_arg>2</mote_arg>
|
||||
<plugin_config>
|
||||
<interface>Serial port</interface>
|
||||
<scrollpos>0,0</scrollpos>
|
||||
</plugin_config>
|
||||
<width>853</width>
|
||||
<z>1</z>
|
||||
<height>491</height>
|
||||
<location_x>765</location_x>
|
||||
<location_y>182</location_y>
|
||||
</plugin>
|
||||
</simconf>
|
||||
|
||||
189
examples/osd/dual-rgbw-actor/server-only.csc
Normal file
189
examples/osd/dual-rgbw-actor/server-only.csc
Normal file
|
|
@ -0,0 +1,189 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<simconf>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/mrm</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/mspsim</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/avrora</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/serial_socket</project>
|
||||
<project EXPORT="discard">[CONTIKI_DIR]/tools/cooja/apps/collect-view</project>
|
||||
<simulation>
|
||||
<title>REST with RPL router</title>
|
||||
<delaytime>-2147483648</delaytime>
|
||||
<randomseed>123456</randomseed>
|
||||
<motedelay_us>1000000</motedelay_us>
|
||||
<radiomedium>
|
||||
se.sics.cooja.radiomediums.UDGM
|
||||
<transmitting_range>50.0</transmitting_range>
|
||||
<interference_range>50.0</interference_range>
|
||||
<success_ratio_tx>1.0</success_ratio_tx>
|
||||
<success_ratio_rx>1.0</success_ratio_rx>
|
||||
</radiomedium>
|
||||
<events>
|
||||
<logoutput>40000</logoutput>
|
||||
</events>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>rplroot</identifier>
|
||||
<description>Sky RPL Root</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c</source>
|
||||
<commands EXPORT="discard">make border-router.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<motetype>
|
||||
se.sics.cooja.mspmote.SkyMoteType
|
||||
<identifier>server</identifier>
|
||||
<description>Erbium Server</description>
|
||||
<source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.c</source>
|
||||
<commands EXPORT="discard">make er-example-server.sky TARGET=sky</commands>
|
||||
<firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky</firmware>
|
||||
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.RimeAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
|
||||
<moteinterface>se.sics.cooja.interfaces.MoteAttributes</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspSerial</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
|
||||
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
|
||||
</motetype>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>33.260163187353555</x>
|
||||
<y>30.643217359962595</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>1</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>rplroot</motetype_identifier>
|
||||
</mote>
|
||||
<mote>
|
||||
<breakpoints />
|
||||
<interface_config>
|
||||
se.sics.cooja.interfaces.Position
|
||||
<x>35.100895239785295</x>
|
||||
<y>39.70574552287428</y>
|
||||
<z>0.0</z>
|
||||
</interface_config>
|
||||
<interface_config>
|
||||
se.sics.cooja.mspmote.interfaces.MspMoteID
|
||||
<id>2</id>
|
||||
</interface_config>
|
||||
<motetype_identifier>server</motetype_identifier>
|
||||
</mote>
|
||||
</simulation>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.SimControl
|
||||
<width>259</width>
|
||||
<z>5</z>
|
||||
<height>179</height>
|
||||
<location_x>0</location_x>
|
||||
<location_y>0</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.Visualizer
|
||||
<plugin_config>
|
||||
<skin>se.sics.cooja.plugins.skins.IDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.UDGMVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.MoteTypeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AttributeVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.LEDVisualizerSkin</skin>
|
||||
<skin>se.sics.cooja.plugins.skins.AddressVisualizerSkin</skin>
|
||||
<viewport>7.9849281638410705 0.0 0.0 7.9849281638410705 -133.27812697619663 -225.04752569190535</viewport>
|
||||
</plugin_config>
|
||||
<width>300</width>
|
||||
<z>4</z>
|
||||
<height>175</height>
|
||||
<location_x>263</location_x>
|
||||
<location_y>3</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.LogListener
|
||||
<plugin_config>
|
||||
<filter />
|
||||
<coloring />
|
||||
</plugin_config>
|
||||
<width>560</width>
|
||||
<z>1</z>
|
||||
<height>326</height>
|
||||
<location_x>1</location_x>
|
||||
<location_y>293</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.RadioLogger
|
||||
<plugin_config>
|
||||
<split>150</split>
|
||||
<analyzers name="6lowpan" />
|
||||
</plugin_config>
|
||||
<width>451</width>
|
||||
<z>-1</z>
|
||||
<height>305</height>
|
||||
<location_x>73</location_x>
|
||||
<location_y>140</location_y>
|
||||
<minimized>true</minimized>
|
||||
</plugin>
|
||||
<plugin>
|
||||
SerialSocketServer
|
||||
<mote_arg>0</mote_arg>
|
||||
<width>422</width>
|
||||
<z>2</z>
|
||||
<height>74</height>
|
||||
<location_x>39</location_x>
|
||||
<location_y>199</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.TimeLine
|
||||
<plugin_config>
|
||||
<mote>0</mote>
|
||||
<mote>1</mote>
|
||||
<showRadioRXTX />
|
||||
<showRadioHW />
|
||||
<showLEDs />
|
||||
<showWatchpoints />
|
||||
<split>125</split>
|
||||
<zoomfactor>25.49079397896416</zoomfactor>
|
||||
</plugin_config>
|
||||
<width>1624</width>
|
||||
<z>3</z>
|
||||
<height>252</height>
|
||||
<location_x>4</location_x>
|
||||
<location_y>622</location_y>
|
||||
</plugin>
|
||||
<plugin>
|
||||
se.sics.cooja.plugins.MoteInterfaceViewer
|
||||
<mote_arg>1</mote_arg>
|
||||
<plugin_config>
|
||||
<interface>Serial port</interface>
|
||||
<scrollpos>0,0</scrollpos>
|
||||
</plugin_config>
|
||||
<width>702</width>
|
||||
<z>0</z>
|
||||
<height>646</height>
|
||||
<location_x>564</location_x>
|
||||
<location_y>2</location_y>
|
||||
</plugin>
|
||||
</simconf>
|
||||
|
||||
65
examples/osd/dual-rgbw-actor/t4-servo-config.h
Normal file
65
examples/osd/dual-rgbw-actor/t4-servo-config.h
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
// Copyright (C) 2014 Marcus Priesch, All rights reserved
|
||||
// In Prandnern 31, A--2122 Riedenthal, Austria. office@priesch.co.at
|
||||
// ****************************************************************************
|
||||
// This program is free software; you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation; either version 2 of the License, or
|
||||
// (at your option) any later version.
|
||||
//
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program; if not, write to the Free Software
|
||||
// Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
// ****************************************************************************
|
||||
//
|
||||
//++
|
||||
// Name
|
||||
// t4-servo-config
|
||||
//
|
||||
// Purpose
|
||||
// configuration for t4-servo
|
||||
//
|
||||
// Revision Dates
|
||||
// 10-Mar-2014 (MPR) Creation
|
||||
// ««revision-date»»···
|
||||
//--
|
||||
|
||||
#include <avr/io.h>
|
||||
|
||||
#ifndef __T4_SERVO_CONFIG_H__
|
||||
#define __T4_SERVO_CONFIG_H__ 1
|
||||
|
||||
// timing: (X:pwm, _:zero)
|
||||
//
|
||||
// X_______________XXXXXXXXXXXXX_______________XXXXXXXXXXXXX
|
||||
//
|
||||
// |<------------->|<--------->|<------------->|<--------->| ...
|
||||
// SERVO_OFFSET SERVO_MAX SERVO_OFFSET SERVO_MAX
|
||||
//
|
||||
// within SERVO_MAX you get the PWM set with servo_set (id, pwm)
|
||||
// if you set SERVO_OFFSET to zero, you get a pwm from 0 to 100% duty cycle
|
||||
//
|
||||
// the period of the smallest tick is derived from the timer4 prescaler
|
||||
// plus the ISR overhead. however, the latter one should be constant
|
||||
// regardless of the pwm signal generated
|
||||
|
||||
#define SERVO_OFFSET 0
|
||||
#define SERVO_MIN 0
|
||||
#define SERVO_MAX 64
|
||||
|
||||
// Counter value for timer 4 without any prescaler for a single tick
|
||||
#define PWMFREQ 200
|
||||
|
||||
#define T4_VALUE F_CPU/SERVO_MAX/PWMFREQ
|
||||
|
||||
#define SERVO_COUNT 8
|
||||
|
||||
#define T4_SENSOR_NAME "Dual RGBW Led"
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
48
examples/osd/dual-rgbw-actor/t4-servo-hardware.h
Normal file
48
examples/osd/dual-rgbw-actor/t4-servo-hardware.h
Normal file
|
|
@ -0,0 +1,48 @@
|
|||
// Copyright (C) 2014 Marcus Priesch, All rights reserved
|
||||
// In Prandnern 31, A--2122 Riedenthal, Austria. office@priesch.co.at
|
||||
// ****************************************************************************
|
||||
// This program is free software; you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation; either version 2 of the License, or
|
||||
// (at your option) any later version.
|
||||
//
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program; if not, write to the Free Software
|
||||
// Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
// ****************************************************************************
|
||||
//
|
||||
//++
|
||||
// Name
|
||||
// t4-servo-hardware
|
||||
//
|
||||
// Purpose
|
||||
// configuration for t4-servo
|
||||
//
|
||||
// Revision Dates
|
||||
// 10-Mar-2014 (MPR) Creation
|
||||
// ««revision-date»»···
|
||||
//--
|
||||
|
||||
#include <avr/io.h>
|
||||
|
||||
#ifndef __T4_SERVO_HARDWARE_H__
|
||||
#define __T4_SERVO_HARDWARE_H__ 1
|
||||
|
||||
static servo_channel_type servo_channels [] =
|
||||
{ /* PORTx, DDRx, PINxn, PWM */
|
||||
{0x05, 0x04, PINB7, 0} // r
|
||||
, {0x0E, 0x0D, PINE2, 0} // g
|
||||
, {0x05, 0x04, PINB6, 0} // b
|
||||
, {0x05, 0x04, PINB5, 0} // w
|
||||
, {0x05, 0x04, PINB1, 0} // r
|
||||
, {0x05, 0x04, PINB0, 0} // g
|
||||
, {0x05, 0x04, PINB2, 0} // b
|
||||
, {0x05, 0x04, PINB3, 0} // w
|
||||
};
|
||||
|
||||
#endif
|
||||
78
examples/osd/dual-rgbw-actor/t4-servo-sensors.h
Normal file
78
examples/osd/dual-rgbw-actor/t4-servo-sensors.h
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
//os_fname_map// t4-servo-config:h:h
|
||||
// Copyright (C) 2014 Marcus Priesch, All rights reserved
|
||||
// In Prandnern 31, A--2122 Riedenthal, Austria. office@priesch.co.at
|
||||
// ****************************************************************************
|
||||
// This program is free software; you can redistribute it and/or modify
|
||||
// it under the terms of the GNU General Public License as published by
|
||||
// the Free Software Foundation; either version 2 of the License, or
|
||||
// (at your option) any later version.
|
||||
//
|
||||
// This program is distributed in the hope that it will be useful,
|
||||
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
// GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License
|
||||
// along with this program; if not, write to the Free Software
|
||||
// Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
// ****************************************************************************
|
||||
//
|
||||
//++
|
||||
// Name
|
||||
// t4-servo-config
|
||||
//
|
||||
// Purpose
|
||||
// configuration for t4-servo
|
||||
//
|
||||
// Revision Dates
|
||||
// 10-Mar-2014 (MPR) Creation
|
||||
// ««revision-date»»···
|
||||
//--
|
||||
|
||||
#include <avr/io.h>
|
||||
|
||||
#ifndef __T4_SERVO_CONFIG_H__
|
||||
#define __T4_SERVO_CONFIG_H__ 1
|
||||
|
||||
// timing: (X:pwm, _:zero)
|
||||
//
|
||||
// X_______________XXXXXXXXXXXXX_______________XXXXXXXXXXXXX
|
||||
//
|
||||
// |<------------->|<--------->|<------------->|<--------->| ...
|
||||
// SERVO_OFFSET SERVO_MAX SERVO_OFFSET SERVO_MAX
|
||||
//
|
||||
// within SERVO_MAX you get the PWM set with servo_set (id, pwm)
|
||||
// if you set SERVO_OFFSET to zero, you get a pwm from 0 to 100% duty cycle
|
||||
//
|
||||
// the period of the smallest tick is derived from the timer4 prescaler
|
||||
// plus the ISR overhead. however, the latter one should be constant
|
||||
// regardless of the pwm signal generated
|
||||
|
||||
#define SERVO_OFFSET 0
|
||||
#define SERVO_MIN 0
|
||||
#define SERVO_MAX 255
|
||||
|
||||
// Counter value for timer 4 without any prescaler for a single tick
|
||||
#define PWMFREQ 500
|
||||
#define T4_VALUE F_CPU/SERVO_MAX/PWMFREQ
|
||||
|
||||
#define SERVO_COUNT 8
|
||||
|
||||
#define T4_SENSOR_NAME "Dual RGBW Led"
|
||||
|
||||
#ifndef servo_channels_defined
|
||||
#define servo_channels_defined
|
||||
static servo_channel_type servo_channels [SERVO_COUNT] =
|
||||
{ {0x0E, 0x0D, PINE2, 0}
|
||||
, {0x0B, 0x0D, PINB7, 0}
|
||||
, {0x0B, 0x0D, PINB6, 0}
|
||||
, {0x0B, 0x0D, PINB5, 0}
|
||||
, {0x0B, 0x0D, PINB0, 0}
|
||||
, {0x0B, 0x0D, PINB1, 0}
|
||||
, {0x0B, 0x0D, PINB2, 0}
|
||||
, {0x0B, 0x0D, PINB3, 0}
|
||||
};
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in a new issue