Merge SPI driver from https://github.com/analogdevicesinc/no-OS
This commit is contained in:
Ian Martin
commit
6d36c83513
418
cpu/rl78/Communication.c
Normal file
418
cpu/rl78/Communication.c
Normal file
|
|
@ -0,0 +1,418 @@
|
|||
/***************************************************************************//**
|
||||
* @file Communication.c
|
||||
* @brief Implementation of the Communication Driver for RL78G14 processor.
|
||||
* @author DBogdan (dragos.bogdan@analog.com)
|
||||
********************************************************************************
|
||||
* Copyright 2012(c) Analog Devices, Inc.
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* - Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* - Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
* - The use of this software may or may not infringe the patent rights
|
||||
* of one or more patent holders. This license does not release you
|
||||
* from the requirement that you obtain separate licenses from these
|
||||
* patent holders to use this software.
|
||||
* - Use of the software either in source or binary form, must be run
|
||||
* on or directly connected to an Analog Devices Inc. component.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
********************************************************************************
|
||||
* SVN Revision: $WCREV$
|
||||
*******************************************************************************/
|
||||
|
||||
/******************************************************************************/
|
||||
/***************************** Include Files **********************************/
|
||||
/******************************************************************************/
|
||||
#include "Communication.h" /* Communication definitions */
|
||||
#include "RDKRL78G14.h" /* RDKRL78G14 definitions */
|
||||
|
||||
char IICA0_Flag;
|
||||
|
||||
/******************************************************************************/
|
||||
/************************ Functions Definitions *******************************/
|
||||
/******************************************************************************/
|
||||
|
||||
/***************************************************************************//**
|
||||
* @brief I2C interrupt service routine.
|
||||
*
|
||||
* @return None.
|
||||
*******************************************************************************/
|
||||
#pragma vector = INTIICA0_vect
|
||||
__interrupt static void
|
||||
IICA0_Interrupt(void)
|
||||
{
|
||||
IICA0_Flag = 1;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Initializes the SPI communication peripheral.
|
||||
*
|
||||
* @param lsbFirst - Transfer format (0 or 1).
|
||||
* Example: 0x0 - MSB first.
|
||||
* 0x1 - LSB first.
|
||||
* @param clockFreq - SPI clock frequency (Hz).
|
||||
* Example: 1000 - SPI clock frequency is 1 kHz.
|
||||
* @param clockPol - SPI clock polarity (0 or 1).
|
||||
* Example: 0x0 - Idle state for clock is a low level; active
|
||||
* state is a high level;
|
||||
* 0x1 - Idle state for clock is a high level; active
|
||||
* state is a low level.
|
||||
* @param clockEdg - SPI clock edge (0 or 1).
|
||||
* Example: 0x0 - Serial output data changes on transition
|
||||
* from idle clock state to active clock state;
|
||||
* 0x1 - Serial output data changes on transition
|
||||
* from active clock state to idle clock state.
|
||||
*
|
||||
* @return status - Result of the initialization procedure.
|
||||
* Example: 0 - if initialization was successful;
|
||||
* -1 - if initialization was unsuccessful.
|
||||
*******************************************************************************/
|
||||
char
|
||||
SPI_Init(char lsbFirst,
|
||||
long clockFreq,
|
||||
char clockPol,
|
||||
char clockEdg)
|
||||
{
|
||||
long mckFreq = 32000000;
|
||||
char sdrValue = 0;
|
||||
char delay = 0;
|
||||
|
||||
/* Configure the CS pins. */
|
||||
PMOD1_CS_OUT;
|
||||
PMOD1_CS_HIGH;
|
||||
PMOD2_CS_OUT;
|
||||
PMOD2_CS_HIGH;
|
||||
ST7579_CS_OUT;
|
||||
ST7579_CS_HIGH;
|
||||
|
||||
/* Enable input clock supply. */
|
||||
SAU1EN = 1;
|
||||
|
||||
/* After setting the SAUmEN bit to 1, be sure to set serial clock select
|
||||
register m (SPSm) after 4 or more fCLK clocks have elapsed. */
|
||||
NOP;
|
||||
NOP;
|
||||
NOP;
|
||||
NOP;
|
||||
|
||||
/* Select the fCLK as input clock. */
|
||||
SPS1 = 0x0000;
|
||||
|
||||
/* Select the CSI operation mode. */
|
||||
SMR11 = 0x0020;
|
||||
|
||||
clockPol = 1 - clockPol;
|
||||
SCR11 = (clockEdg << 13) |
|
||||
(clockPol << 12) |
|
||||
0xC000 | /* Operation mode: Transmission/reception. */
|
||||
0x0007; /* 8-bit data length. */
|
||||
|
||||
/* clockFreq = mckFreq / (sdrValue * 2 + 2) */
|
||||
sdrValue = mckFreq / (2 * clockFreq) - 1;
|
||||
SDR11 = sdrValue << 9;
|
||||
|
||||
/* Set the clock and data initial level. */
|
||||
clockPol = 1 - clockPol;
|
||||
SO1 &= ~0x0202;
|
||||
SO1 |= (clockPol << 9) |
|
||||
(clockPol << 1);
|
||||
|
||||
/* Enable output for serial communication operation. */
|
||||
SOE1 |= 0x0002;
|
||||
|
||||
/* Configure the MISO pin as input. */
|
||||
PM7 |= 0x02;
|
||||
|
||||
/* Configure SCLK and MOSI pins as output. */
|
||||
P7 |= 0x05;
|
||||
PM7 &= ~0x05;
|
||||
|
||||
/* Wait for the changes to take place. */
|
||||
for(delay = 0; delay < 50; delay++) {
|
||||
NOP;
|
||||
}
|
||||
|
||||
/* Set the SEmn bit to 1 and enter the communication wait status */
|
||||
SS1 |= 0x0002;
|
||||
|
||||
return 0;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Writes data to SPI.
|
||||
*
|
||||
* @param slaveDeviceId - The ID of the selected slave device.
|
||||
* @param data - Data represents the write buffer.
|
||||
* @param bytesNumber - Number of bytes to write.
|
||||
*
|
||||
* @return Number of written bytes.
|
||||
*******************************************************************************/
|
||||
char
|
||||
SPI_Write(char slaveDeviceId,
|
||||
unsigned char *data,
|
||||
char bytesNumber)
|
||||
{
|
||||
char byte = 0;
|
||||
unsigned char read = 0;
|
||||
unsigned short originalSCR = 0;
|
||||
unsigned short originalSO1 = 0;
|
||||
|
||||
if(slaveDeviceId == 1) {
|
||||
PMOD1_CS_LOW;
|
||||
}
|
||||
if(slaveDeviceId == 2) {
|
||||
PMOD2_CS_LOW;
|
||||
}
|
||||
if(slaveDeviceId == 3) {
|
||||
ST1 |= 0x0002;
|
||||
originalSO1 = SO1;
|
||||
originalSCR = SCR11;
|
||||
SO1 &= ~0x0202;
|
||||
SCR11 &= ~0x3000;
|
||||
SS1 |= 0x0002;
|
||||
ST7579_CS_LOW;
|
||||
}
|
||||
for(byte = 0; byte < bytesNumber; byte++) {
|
||||
SIO21 = data[byte];
|
||||
NOP;
|
||||
while(SSR11 & 0x0040) ;
|
||||
read = SIO21;
|
||||
}
|
||||
if(slaveDeviceId == 1) {
|
||||
PMOD1_CS_HIGH;
|
||||
}
|
||||
if(slaveDeviceId == 2) {
|
||||
PMOD2_CS_HIGH;
|
||||
}
|
||||
if(slaveDeviceId == 3) {
|
||||
ST7579_CS_HIGH;
|
||||
ST1 |= 0x0002;
|
||||
SO1 = originalSO1;
|
||||
SCR11 = originalSCR;
|
||||
SS1 |= 0x0002;
|
||||
}
|
||||
|
||||
return bytesNumber;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Reads data from SPI.
|
||||
*
|
||||
* @param slaveDeviceId - The ID of the selected slave device.
|
||||
* @param data - Data represents the write buffer as an input parameter
|
||||
* and the read buffer as an output parameter.
|
||||
* @param bytesNumber - Number of bytes to read.
|
||||
*
|
||||
* @return Number of read bytes.
|
||||
*******************************************************************************/
|
||||
char
|
||||
SPI_Read(char slaveDeviceId,
|
||||
unsigned char *data,
|
||||
char bytesNumber)
|
||||
{
|
||||
char byte = 0;
|
||||
unsigned short originalSCR = 0;
|
||||
unsigned short originalSO1 = 0;
|
||||
|
||||
if(slaveDeviceId == 1) {
|
||||
PMOD1_CS_LOW;
|
||||
}
|
||||
if(slaveDeviceId == 2) {
|
||||
PMOD2_CS_LOW;
|
||||
}
|
||||
if(slaveDeviceId == 3) {
|
||||
ST1 |= 0x0002;
|
||||
originalSO1 = SO1;
|
||||
originalSCR = SCR11;
|
||||
SO1 &= ~0x0202;
|
||||
SCR11 &= ~0x3000;
|
||||
SS1 |= 0x0002;
|
||||
ST7579_CS_LOW;
|
||||
}
|
||||
for(byte = 0; byte < bytesNumber; byte++) {
|
||||
SIO21 = data[byte];
|
||||
NOP;
|
||||
while(SSR11 & 0x0040) ;
|
||||
data[byte] = SIO21;
|
||||
}
|
||||
if(slaveDeviceId == 1) {
|
||||
PMOD1_CS_HIGH;
|
||||
}
|
||||
if(slaveDeviceId == 2) {
|
||||
PMOD2_CS_HIGH;
|
||||
}
|
||||
if(slaveDeviceId == 3) {
|
||||
ST7579_CS_HIGH;
|
||||
ST1 |= 0x0002;
|
||||
SO1 = originalSO1;
|
||||
SCR11 = originalSCR;
|
||||
SS1 |= 0x0002;
|
||||
}
|
||||
|
||||
return bytesNumber;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Initializes the I2C communication peripheral.
|
||||
*
|
||||
* @param clockFreq - I2C clock frequency (Hz).
|
||||
* Example: 100000 - SPI clock frequency is 100 kHz.
|
||||
* @return status - Result of the initialization procedure.
|
||||
* Example: 0 - if initialization was successful;
|
||||
* -1 - if initialization was unsuccessful.
|
||||
*******************************************************************************/
|
||||
char
|
||||
I2C_Init(long clockFreq)
|
||||
{
|
||||
long fckFreq = 32000000;
|
||||
unsigned char wlValue = 0;
|
||||
unsigned char whValue = 0;
|
||||
|
||||
/* Enable interrupts */
|
||||
EI;
|
||||
|
||||
/* Enable input clock supply. */
|
||||
IICA0EN = 1;
|
||||
|
||||
/* Set the fast mode plus operation. */
|
||||
SMC0 = 1;
|
||||
|
||||
/* Set transfer rate. */
|
||||
wlValue = (unsigned char)((0.5 * fckFreq) / clockFreq);
|
||||
whValue = (unsigned char)(wlValue - (fckFreq / (10 * clockFreq)));
|
||||
IICWL0 = wlValue;
|
||||
IICWH0 = whValue;
|
||||
|
||||
STCEN0 = 1; /* After operation is enabled, enable generation of a start */
|
||||
/* condition without detecting a stop condition. */
|
||||
WTIM0 = 1; /* Interrupt request is generated at the ninth clock’s */
|
||||
/* falling edge. */
|
||||
|
||||
/* Enable I2C operation. */
|
||||
IICE0 = 1;
|
||||
|
||||
/* Configure SCLA0 and SDAA0 pins as digital output. */
|
||||
P6 &= ~0x03;
|
||||
PM6 &= ~0x03;
|
||||
|
||||
return 0;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Writes data to a slave device.
|
||||
*
|
||||
* @param slaveAddress - Adress of the slave device.
|
||||
* @param dataBuffer - Pointer to a buffer storing the transmission data.
|
||||
* @param bytesNumber - Number of bytes to write.
|
||||
* @param stopBit - Stop condition control.
|
||||
* Example: 0 - A stop condition will not be sent;
|
||||
* 1 - A stop condition will be sent.
|
||||
*
|
||||
* @return status - Number of read bytes or 0xFF if the slave address was
|
||||
* not acknowledged by the device.
|
||||
*******************************************************************************/
|
||||
char
|
||||
I2C_Write(char slaveAddress,
|
||||
unsigned char *dataBuffer,
|
||||
char bytesNumber,
|
||||
char stopBit)
|
||||
{
|
||||
char byte = 0;
|
||||
char status = 0;
|
||||
|
||||
IICAMK0 = 1; /* Interrupt servicing disabled. */
|
||||
STT0 = 1; /* Generate a start condition. */
|
||||
IICAMK0 = 0; /* Interrupt servicing enabled. */
|
||||
|
||||
/* Send the first byte. */
|
||||
IICA0_Flag = 0;
|
||||
IICA0 = (slaveAddress << 1);
|
||||
while(IICA0_Flag == 0) ;
|
||||
|
||||
if(ACKD0) { /* Acknowledge was detected. */
|
||||
for(byte = 0; byte < bytesNumber; byte++) {
|
||||
IICA0_Flag = 0;
|
||||
IICA0 = *dataBuffer;
|
||||
while(IICA0_Flag == 0) ;
|
||||
dataBuffer++;
|
||||
}
|
||||
status = bytesNumber;
|
||||
} else { /* Acknowledge was not detected. */
|
||||
status = 0xFF;
|
||||
}
|
||||
if(stopBit) {
|
||||
SPT0 = 1; /* Generate a stop condition. */
|
||||
while(IICBSY0) ; /* Wait until the I2C bus status flag is cleared. */
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
/***************************************************************************//**
|
||||
* @brief Reads data from a slave device.
|
||||
*
|
||||
* @param slaveAddress - Adress of the slave device.
|
||||
* @param dataBuffer - Pointer to a buffer that will store the received data.
|
||||
* @param bytesNumber - Number of bytes to read.
|
||||
* @param stopBit - Stop condition control.
|
||||
* Example: 0 - A stop condition will not be sent;
|
||||
* 1 - A stop condition will be sent.
|
||||
*
|
||||
* @return status - Number of read bytes or 0xFF if the slave address was
|
||||
* not acknowledged by the device.
|
||||
*******************************************************************************/
|
||||
char
|
||||
I2C_Read(char slaveAddress,
|
||||
unsigned char *dataBuffer,
|
||||
char bytesNumber,
|
||||
char stopBit)
|
||||
{
|
||||
char byte = 0;
|
||||
char status = 0;
|
||||
|
||||
IICAMK0 = 1; /* Interrupt servicing disabled. */
|
||||
STT0 = 1; /* Generate a start condition. */
|
||||
IICAMK0 = 0; /* Interrupt servicing enabled. */
|
||||
|
||||
/* Send the first byte. */
|
||||
IICA0_Flag = 0;
|
||||
IICA0 = (slaveAddress << 1) + 1;
|
||||
while(IICA0_Flag == 0) ;
|
||||
|
||||
if(ACKD0) { /* Acknowledge was detected. */
|
||||
ACKE0 = 1; /* Enable acknowledgment. */
|
||||
for(byte = 0; byte < bytesNumber; byte++) {
|
||||
if(byte == (bytesNumber - 1)) {
|
||||
ACKE0 = 0U; /* Disable acknowledgment. */
|
||||
}
|
||||
WREL0 = 1U; /* Cancel wait. */
|
||||
IICA0_Flag = 0;
|
||||
while(IICA0_Flag == 0) ;
|
||||
*dataBuffer = IICA0;
|
||||
dataBuffer++;
|
||||
}
|
||||
status = bytesNumber;
|
||||
} else { /* Acknowledge was not detected. */
|
||||
status = 0xFF;
|
||||
}
|
||||
if(stopBit) {
|
||||
SPT0 = 1; /* Generate a stop condition. */
|
||||
while(IICBSY0) ; /* Wait until the I2C bus status flag is cleared. */
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
109
cpu/rl78/Communication.h
Normal file
109
cpu/rl78/Communication.h
Normal file
|
|
@ -0,0 +1,109 @@
|
|||
/***************************************************************************//**
|
||||
* @file Communication.h
|
||||
* @brief Header file of the Communication Driver for RL78G14 processor.
|
||||
* @author DBogdan (dragos.bogdan@analog.com)
|
||||
********************************************************************************
|
||||
* Copyright 2012(c) Analog Devices, Inc.
|
||||
*
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* - Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* - Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
* - The use of this software may or may not infringe the patent rights
|
||||
* of one or more patent holders. This license does not release you
|
||||
* from the requirement that you obtain separate licenses from these
|
||||
* patent holders to use this software.
|
||||
* - Use of the software either in source or binary form, must be run
|
||||
* on or directly connected to an Analog Devices Inc. component.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
********************************************************************************
|
||||
* SVN Revision: $WCREV$
|
||||
*******************************************************************************/
|
||||
#ifndef __COMMUNICATION_H__
|
||||
#define __COMMUNICATION_H__
|
||||
|
||||
/******************************************************************************/
|
||||
/***************************** Include Files **********************************/
|
||||
/******************************************************************************/
|
||||
#include "RDKRL78G14.h"
|
||||
|
||||
/******************************************************************************/
|
||||
/*************************** Macros Definitions *******************************/
|
||||
/******************************************************************************/
|
||||
#define SPI_CS_PIN_OUT PMOD1_CS_OUT
|
||||
#define SPI_CS_LOW PMOD1_CS_LOW
|
||||
#define SPI_CS_HIGH PMOD1_CS_HIGH
|
||||
#define SPI_MISO PMOD1_MISO
|
||||
|
||||
#define GPIO1_PIN_OUT PMOD1_GPIO1_PIN_OUT
|
||||
#define GPIO1_LOW PMOD1_GPIO1_LOW
|
||||
#define GPIO1_HIGH PMOD1_GPIO1_HIGH
|
||||
|
||||
#define GPIO2_PIN_OUT PMOD1_GPIO2_PIN_OUT
|
||||
#define GPIO2_LOW PMOD1_GPIO2_LOW
|
||||
#define GPIO2_HIGH PMOD1_GPIO2_HIGH
|
||||
|
||||
#define GPIO3_PIN_OUT PMOD1_GPIO3_PIN_OUT
|
||||
#define GPIO3_LOW PMOD1_GPIO3_LOW
|
||||
#define GPIO3_HIGH PMOD1_GPIO3_HIGH
|
||||
|
||||
#define GPIO4_PIN_OUT PMOD1_GPIO4_PIN_OUT
|
||||
#define GPIO4_LOW PMOD1_GPIO4_LOW
|
||||
#define GPIO4_HIGH PMOD1_GPIO4_HIGH
|
||||
|
||||
/******************************************************************************/
|
||||
/************************ Functions Declarations ******************************/
|
||||
/******************************************************************************/
|
||||
|
||||
/*! Initializes the SPI communication peripheral. */
|
||||
char SPI_Init(char lsbFirst,
|
||||
long clockFreq,
|
||||
char clockPol,
|
||||
char clockEdg);
|
||||
|
||||
/*! Writes data to SPI. */
|
||||
char SPI_Write(char slaveDeviceId,
|
||||
unsigned char *data,
|
||||
char bytesNumber);
|
||||
|
||||
/*! Reads data from SPI. */
|
||||
char SPI_Read(char slaveDeviceId,
|
||||
unsigned char *data,
|
||||
char bytesNumber);
|
||||
|
||||
/*! Initializes the I2C communication peripheral. */
|
||||
char I2C_Init(long clockFreq);
|
||||
|
||||
/*! Writes data to a slave device. */
|
||||
char I2C_Write(char slaveAddress,
|
||||
unsigned char *dataBuffer,
|
||||
char bytesNumber,
|
||||
char stopBit);
|
||||
|
||||
/*! Reads data from a slave device. */
|
||||
char I2C_Read(char slaveAddress,
|
||||
unsigned char *dataBuffer,
|
||||
char bytesNumber,
|
||||
char stopBit);
|
||||
|
||||
#endif /* __COMMUNICATION_H__ */
|
||||
Loading…
Reference in a new issue