Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki

cpu/avr/Makefile.avr

@@ -105,6 +105,7 @@ CC       = avr-gcc
 LD       = avr-gcc
 AS       = avr-as
 AR       = avr-ar
+ELF_SIZE = avr-size -C --mcu=$(MCU)
 OBJCOPY  = avr-objcopy
 STRIP    = avr-strip
 CFLAGSNO = -Wall -mmcu=$(MCU) -gdwarf-2 -fno-strict-aliasing \

cpu/avr/radio/rf230bb/rf230bb.c

@@ -980,16 +980,18 @@ rf230_transmit(unsigned short payload_len)
 
   RELEASE_LOCK();
   if (tx_result==1) {               //success, data pending from adressee
-    tx_result=0;                    //Just show success?
+    tx_result = RADIO_TX_OK;        //Just show success?
   } else if (tx_result==3) {        //CSMA channel access failure
     DEBUGFLOW('m');
     RIMESTATS_ADD(contentiondrop);
     PRINTF("rf230_transmit: Transmission never started\n");
+    tx_result = RADIO_TX_COLLISION;
   } else if (tx_result==5) {        //Expected ACK, none received
     DEBUGFLOW('n');
-//	tx_result=0;
+    tx_result = RADIO_TX_NOACK;
   } else if (tx_result==7) {        //Invalid (Can't happen since waited for idle above?)
     DEBUGFLOW('o');
+    tx_result = RADIO_TX_ERR;
   }
 
   return tx_result;

examples/ipv6/rpl-border-router/httpd-simple.h

@@ -26,7 +26,6 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: httpd-simple.h,v 1.1 2010/05/09 12:52:05 nifi Exp $
  */
 
 /**
@@ -43,8 +42,10 @@
 
 #include "contiki-net.h"
 
+/* The current internal border router webserver ignores the requested file name */
+/* and needs no per-connection output buffer, so save some RAM */
 #ifndef WEBSERVER_CONF_CFS_PATHLEN
-#define HTTPD_PATHLEN 80
+#define HTTPD_PATHLEN 2
 #else /* WEBSERVER_CONF_CFS_CONNS */
 #define HTTPD_PATHLEN WEBSERVER_CONF_CFS_PATHLEN
 #endif /* WEBSERVER_CONF_CFS_CONNS */
@@ -56,8 +57,8 @@ struct httpd_state {
   struct timer timer;
   struct psock sin, sout;
   struct pt outputpt;
-  char inputbuf[HTTPD_PATHLEN + 30];
+  char inputbuf[HTTPD_PATHLEN + 24];
-  char outputbuf[UIP_TCP_MSS];
+/*char outputbuf[UIP_TCP_MSS]; */
   char filename[HTTPD_PATHLEN];
   httpd_simple_script_t script;
   char state;

examples/webserver-ipv6/Makefile

@@ -25,8 +25,12 @@ endif
 #copy output to e.g. webserver-nano.sky, raven-webserver.avr-raven
 $(WITH_WEBSERVER) : $(CONTIKI_PROJECT)
 	cp $(CONTIKI_PROJECT).$(TARGET) $(WITH_WEBSERVER).$(TARGET)
+	@if (test -n "$(ELF_SIZE)");then $(ELF_SIZE) $(WITH_WEBSERVER).$(TARGET);fi
 else
 APPS=webserver
+
+all : $(CONTIKI_PROJECT)
+	@if (test -n "$(ELF_SIZE)");then $(ELF_SIZE) $(CONTIKI_PROJECT).$(TARGET);fi	
 endif
 
 UIP_CONF_IPV6=1

platform/avr-atmega128rfa1/Makefile.avr-atmega128rfa1

@@ -2,7 +2,7 @@ CONTIKI_TARGET_DIRS = . apps net loader
 
 CONTIKI_CORE=contiki-main
 CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o
-CONTIKI_TARGET_SOURCEFILES += contiki-main.c
+CONTIKI_TARGET_SOURCEFILES += contiki-main.c params.c
 #Needed for slip
 CONTIKI_TARGET_SOURCEFILES += button-sensor.c sensors.c slip_uart0.c slip.c
 

platform/avr-atmega128rfa1/apps/raven-lcd-interface/raven-lcd.c

@@ -101,7 +101,11 @@ void rs232_send(uint8_t port, unsigned char c);
 void
 raven_ping6(void)
 {
-#define PING_GOOGLE 0
+#if UIP_CONF_IPV6_RPL||1
+/* No default router, so pick on someone else */
+#define PING_GOOGLE 1
+seqno++;
+#endif
 
     UIP_IP_BUF->vtc = 0x60;
     UIP_IP_BUF->tcflow = 1;

platform/avr-atmega128rfa1/apps/raven-webserver/httpd-fs/makefsdata.h

@@ -1,7 +1,10 @@
 #include <avr/eeprom.h>
 
-/* Link layer ipv6 address will become fe80::11:22ff:fe33:4455 */
+/* Link layer ipv6 address will become fe80::ff:fe:1 */
-uint8_t mac_address[8]  EEMEM = {0x02, 0x11, 0x22, 0xff, 0xfe, 0x33, 0x44, 0x55};
+uint8_t default_mac_address[8]  PROGMEM = {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01};
-uint8_t server_name[16] EEMEM = "Contiki-Raven";
+uint8_t default_server_name[16] PROGMEM = "ATMEGA128rfa1";
-uint8_t domain_name[30] EEMEM = "localhost";
+uint8_t default_domain_name[30] PROGMEM = "localhost";
+uint8_t eemem_mac_address[8]      EEMEM = {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01};
+uint8_t eemem_server_name[16]     EEMEM = "ATMEGA128rfa1";
+uint8_t eemem_domain_name[30]     EEMEM = "localhost";
 

platform/avr-atmega128rfa1/apps/raven-webserver/httpd-fsdata.c

@@ -2,10 +2,15 @@
 
 #include <avr/eeprom.h>
 
-/* Link layer ipv6 address will become fe80::2 */
+
-uint8_t mac_address[8]  EEMEM = {0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02};
+/* Link layer ipv6 address will become fe80::ff:fe:1 */
-uint8_t server_name[16] EEMEM = "huginn";
+uint8_t default_mac_address[8]  PROGMEM = {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01};
-uint8_t domain_name[30] EEMEM = "localhost";
+uint8_t default_server_name[16] PROGMEM = "ATMEGA128rfa1";
+uint8_t default_domain_name[30] PROGMEM = "localhost";
+uint8_t eemem_mac_address[8]      EEMEM = {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01};
+uint8_t eemem_server_name[16]     EEMEM = "ATMEGA128rfa1";
+uint8_t eemem_domain_name[30]     EEMEM = "localhost";
+
 
 const char data_404_html[140] PROGMEM = {
   /* /404.html */

platform/avr-atmega128rfa1/apps/raven-webserver/httpd.c

@@ -459,6 +459,10 @@ httpd_appcall(void *state)
   if (1) {
 #else
   struct httpd_state *s = (struct httpd_state *)state;
+#if RF230BB_CONF_LEDONPORTE1
+  extern uint16_t ledtimer;
+  PORTE|=(1<<PE1);ledtimer=1000; //turn on led, set counter for turnoff
+#endif
   if(uip_closed() || uip_aborted() || uip_timedout()) {
     if(s != NULL) {
       memb_free(&conns, s);

platform/avr-atmega128rfa1/contiki-main.c

@@ -29,11 +29,23 @@
  * This file is part of the Contiki operating system.
  *
  */
+#define PRINTF(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
+
 #define ANNOUNCE_BOOT 1    //adds about 600 bytes to program size
+#if ANNOUNCE_BOOT
+#define PRINTA(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
+#else
+#define PRINTA(...)
+#endif
 
-#define DEBUG DEBUG_PRINT
+#define DEBUG 0
-#include "uip-debug.h" ////Does #define PRINTA(FORMAT,args...) printf_P(PSTR(FORMAT),##args) for AVR
+#if DEBUG
+#define PRINTD(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
+#else
+#define PRINTD(...)
+#endif
 
+/* Track interrupt flow through mac, rdc and radio driver */
 #if DEBUGFLOWSIZE
 uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
 #define DEBUGFLOW(c) if (debugflowsize<(DEBUGFLOWSIZE-1)) debugflow[debugflowsize++]=c
@@ -51,20 +63,12 @@ uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
 #include "loader/symbols-def.h"
 #include "loader/symtab.h"
 
-#if RF230BB        //radio driver using contiki core mac
+#include "params.h"
 #include "radio/rf230bb/rf230bb.h"
 #include "net/mac/frame802154.h"
 #include "net/mac/framer-802154.h"
 #include "net/sicslowpan.h"
 
-#else                 //radio driver using Atmel/Cisco 802.15.4'ish MAC
-#include <stdbool.h>
-#include "mac.h"
-#include "sicslowmac.h"
-#include "sicslowpan.h"
-#include "ieee-15-4-manager.h"
-#endif /*RF230BB*/
-
 #include "contiki.h"
 #include "contiki-net.h"
 #include "contiki-lib.h"
@@ -73,7 +77,6 @@ uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
 #include "dev/serial-line.h"
 #include "dev/slip.h"
 
-/* No 3290p to talk to but the lcd process still needed for uip stack ping callbacks */
 #ifdef RAVEN_LCD_INTERFACE
 #include "raven-lcd.h"
 #endif
@@ -97,11 +100,12 @@ uint8_t debugflowsize,debugflow[DEBUGFLOWSIZE];
 
 /* Get periodic prints from idle loop, from clock seconds or rtimer interrupts */
 /* Use of rtimer will conflict with other rtimer interrupts such as contikimac radio cycling */
+/* STAMPS will print ENERGEST outputs if that is enabled. */
 #define PERIODICPRINTS 1
 #if PERIODICPRINTS
 //#define PINGS 64
-#define ROUTES 128
+#define ROUTES 600
-#define STAMPS 30
+#define STAMPS 60
 #define STACKMONITOR 1024
 uint32_t clocktime;
 #define TESTRTIMER 0
@@ -112,111 +116,86 @@ void rtimercycle(void) {rtimerflag=1;}
 #endif
 #endif
 
+uint16_t ledtimer;
+
 /*-------------------------------------------------------------------------*/
 /*----------------------Configuration of the .elf file---------------------*/
-typedef struct {unsigned char B2;unsigned char B1;unsigned char B0;} __signature_t;
+#if 1
+/* The proper way to set the signature is */
+#include <avr/signature.h>
+#else
+/* Older avr-gcc's may not define the needed SIGNATURE bytes. Do it manually if you get an error */
+typedef struct {const unsigned char B2;const unsigned char B1;const unsigned char B0;} __signature_t;
 #define SIGNATURE __signature_t __signature __attribute__((section (".signature")))
 SIGNATURE = {
-/* Older AVR-GCCs may not define the SIGNATURE_n bytes so use explicit ATmega128rfa1 values */
+  .B2 = 0x01,//SIGNATURE_2, //ATMEGA128rfa1
-  .B2 = SIGNATURE_2,//0x01,//SIGNATURE_2,
+  .B1 = 0xA7,//SIGNATURE_1, //128KB flash
-  .B1 = SIGNATURE_1,//0xA7,//SIGNATURE_1,
+  .B0 = 0x1E,//SIGNATURE_0, //Atmel
-  .B0 = SIGNATURE_0,//0x1E,//SIGNATURE_0,
 };
-//JTAG+SPI, Boot 4096 words @ $F000, Internal oscillator, startup 6 CK + 65 ms, Brownout disabled
+#endif
+
+#if 1
+/* JTAG, SPI enabled, Internal RC osc, Boot flash size 4K, 6CK+65msec delay, brownout disabled */
 FUSES ={.low = 0xe2, .high = 0x99, .extended = 0xff,};
-//JTAG+SPI, Boot 4096 words @ $F000, Internal  oscillator, startup 6 CK +0 ms, Brownout 1.8 volts
-//FUSES ={.low = 0xC2, .high = 0x99, .extended = 0xfe,};
-
-/*----------------------Configuration of EEPROM---------------------------*/
-/* Use existing EEPROM if it passes the integrity test, else reinitialize with build values */
-
-/* Put default MAC address in EEPROM */
-#if AVR_WEBSERVER
-extern uint8_t mac_address[8];     //These are defined in httpd-fsdata.c via makefsdata.h
-extern uint8_t server_name[16];
-extern uint8_t domain_name[30];
 #else
-uint8_t mac_address[8] EEMEM = {0x02, 0x11, 0x22, 0xff, 0xfe, 0x33, 0x44, 0x55};
+/* JTAG+SPI, Boot 4096 words @ $F000, Internal  oscillator, startup 6 CK +0 ms, Brownout 1.8 volts */
+FUSES ={.low = 0xC2, .high = 0x99, .extended = 0xfe,};
 #endif
 
-
+uint8_t
-#ifdef CHANNEL_802_15_4
+rng_get_uint8(void) {
-uint8_t rf_channel[2] EEMEM = {CHANNEL_802_15_4, ~CHANNEL_802_15_4};
+#if 1
-//uint8_t rf_channel[2] EEMEM = {11, ~11};  //econotag test
+  /* Upper two RSSI reg bits (RND_VALUE) are random in rf231 */
+  uint8_t j;
+  j = (PHY_RSSI>>6) | (PHY_RSSI>>4) | (PHY_RSSI>>4) | PHY_RSSI;
 #else
-uint8_t rf_channel[2] EEMEM = {26, ~26};
+/* Get a pseudo random number using the ADC */
-#endif
+  uint8_t i,j;
-static uint8_t get_channel_from_eeprom() {
+  ADCSRA=1<<ADEN;             //Enable ADC, not free running, interrupt disabled, fastest clock
-    uint8_t eeprom_channel;
+  for (i=0;i<4;i++) {
-	uint8_t eeprom_check;
+    ADMUX = 0;                //toggle reference to increase noise
-
+    ADMUX =0x1E;              //Select AREF as reference, measure 1.1 volt bandgap reference.
-	eeprom_channel = eeprom_read_byte(&rf_channel[0]);
+    ADCSRA|=1<<ADSC;          //Start conversion
-	eeprom_check = eeprom_read_byte(&rf_channel[1]);
+    while (ADCSRA&(1<<ADSC)); //Wait till done
-
+	j = (j<<2) + ADC;
-	if(eeprom_channel==~eeprom_check)
+  }
-		return eeprom_channel;
+  ADCSRA=0;                   //Disable ADC
-
-#ifdef CHANNEL_802_15_4
-//return(11);
-	return(CHANNEL_802_15_4);
-#else
-	return 26;
 #endif
+  PRINTD("rng issues %d\n",j);
+  return j;
 }
 
-static bool get_mac_from_eeprom(uint8_t* macptr) {
-	eeprom_read_block ((void *)macptr,  &mac_address, 8);
-	return true;
-}
-
-static uint16_t get_panid_from_eeprom(void) {
-	// TODO: Writeme!
-	return IEEE802154_PANID;
-//return 0xaaaa; //econotag ack test
-}
-
-static uint16_t get_panaddr_from_eeprom(void) {
-	// TODO: Writeme!
-    return 0;
-//	return 0x1111; //econotag ack test
-}
-
-void calibrate_rc_osc_32k();
-extern uint8_t osccal_calibrated;
 /*-------------------------Low level initialization------------------------*/
 /*------Done in a subroutine to keep main routine stack usage small--------*/
 void initialize(void)
 {
+  watchdog_init();
+  watchdog_start();
+
+/* The Raven implements a serial command and data interface via uart0 to a 3290p,
+ * which could be duplicated using another host computer.
+ */
 #if !RF230BB_CONF_LEDONPORTE1   //Conflicts with USART0
-#if RAVEN_LCD_INTERFACE
+#ifdef RAVEN_LCD_INTERFACE
-  /* First rs232 port for Raven 3290 port */
+  rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
-   rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
+  rs232_set_input(0,raven_lcd_serial_input);
-  /* Set input handler for 3290 port */
-   rs232_set_input(0,raven_lcd_serial_input);
 #else
-  //Slip border router on uart0
+  /* Generic or slip connection on uart0 */
   rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
 #endif
 #endif
 
   /* Second rs232 port for debugging or slip alternative */
   rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
-// rs232_init(RS232_PORT_1,  USART_BAUD_115200,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
-
   /* Redirect stdout to second port */
   rs232_redirect_stdout(RS232_PORT_1);
   clock_init();
 
-#if 1
+  if(MCUSR & (1<<PORF )) PRINTD("Power-on reset.\n");
-  if(MCUSR & (1<<PORF )) PRINTA("Power-on reset.\n");
+  if(MCUSR & (1<<EXTRF)) PRINTD("External reset!\n");
-  if(MCUSR & (1<<EXTRF)) PRINTA("External reset!\n");
+  if(MCUSR & (1<<BORF )) PRINTD("Brownout reset!\n");
-  if(MCUSR & (1<<BORF )) PRINTA("Brownout reset!\n");
+  if(MCUSR & (1<<WDRF )) PRINTD("Watchdog reset!\n");
-  if(MCUSR & (1<<WDRF )) PRINTA("Watchdog reset!\n");
+  if(MCUSR & (1<<JTRF )) PRINTD("JTAG reset!\n");
-  if(MCUSR & (1<<JTRF )) PRINTA("JTAG reset!\n");
-#endif
-  
-  watchdog_init();
-  watchdog_start();
 
 #if STACKMONITOR
   /* Simple stack pointer highwater monitor. Checks for magic numbers in the main
@@ -232,85 +211,78 @@ uint16_t p=(uint16_t)&__bss_end;
     } while (p<SP-10); //don't overwrite our own stack
 }
 #endif
-#if 0
+
-/* Get a random (or probably different) seed for the 802.15.4 packet sequence number.
- * Some layers will ignore duplicates found in a history (e.g. Contikimac)
- * causing the initial packets to be ignored after a short-cycle restart.
- */
-  ADMUX =0x5E;              //Select AVDD as reference, measure 1.1 volt bandgap reference.
-//ADCSRB|=1<<MUX5;
- //   ADMUX =0x49;              //Select AVDD as reference, measure ADC0 10x differential.
-  ADCSRA=1<<ADEN;           //Enable ADC, not free running, interrupt disabled, fastest clock
-  ADCSRA|=1<<ADSC;          //Start conversion
-  while (ADCSRA&(1<<ADSC)); //Wait till done
-  PRINTF("ADC=%d\n",ADC);
-  random_init(ADC);
-  ADCSRA=0;                 //Disable ADC
-#endif 
 #define CONF_CALIBRATE_OSCCAL 0
 #if CONF_CALIBRATE_OSCCAL
+void calibrate_rc_osc_32k();
 {
+extern uint8_t osccal_calibrated;
 uint8_t i;
-  watchdog_stop();
+  PRINTD("\nBefore calibration OSCCAL=%x\n",OSCCAL);
-  PRINTA("\nBefore calibration OSCCAL=%x\n",OSCCAL);
   for (i=0;i<10;i++) { 
     calibrate_rc_osc_32k();  
-    PRINTA("Calibrated=%x\n",osccal_calibrated);
+    PRINTD("Calibrated=%x\n",osccal_calibrated);
 //#include <util/delay_basic.h>
 //#define delay_us( us )   ( _delay_loop_2(1+(us*F_CPU)/4000000UL) ) 
 //   delay_us(50000);
  }
    clock_init();
-   watchdog_start();
 }
 #endif 
 
-#if ANNOUNCE_BOOT
   PRINTA("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
-#endif
 
 /* rtimers needed for radio cycling */
   rtimer_init();
 
  /* Initialize process subsystem */
   process_init();
- /* etimers must be started before ctimer_init */
+
+  /* etimers must be started before ctimer_init */
   process_start(&etimer_process, NULL);
-
-#if RF230BB
-
   ctimer_init();
+
   /* Start radio and radio receive process */
   NETSTACK_RADIO.init();
 
-#if 1
+/* Get a random seed for the 802.15.4 packet sequence number.
-{uint8_t somebits;
+ * Some layers will ignore duplicates found in a history (e.g. Contikimac)
-  /* Upper two RSSI reg bits (RND_VALUE) are random in rf231 */
+ * causing the initial packets to be ignored after a short-cycle restart.
-  somebits= (PHY_RSSI>>6) | (PHY_RSSI>>4) | (PHY_RSSI>>4) | PHY_RSSI;
+ */
-  PRINTF("rnd=%d\n", somebits);
+  random_init(rng_get_uint8());
-  random_init(somebits);
-}
-#endif
 
   /* Set addresses BEFORE starting tcpip process */
 
   rimeaddr_t addr;
-  memset(&addr, 0, sizeof(rimeaddr_t));
+
-  get_mac_from_eeprom(addr.u8);
+  if (params_get_eui64(addr.u8)) {
+      PRINTA("Random EUI64 address generated\n");
+  }
  
 #if UIP_CONF_IPV6 
-  memcpy(&uip_lladdr.addr, &addr.u8, 8);
+  memcpy(&uip_lladdr.addr, &addr.u8, sizeof(rimeaddr_t));
+#elif WITH_NODE_ID
+  node_id=get_panaddr_from_eeprom();
+  addr.u8[1]=node_id&0xff;
+  addr.u8[0]=(node_id&0xff00)>>8;
+  PRINTA("Node ID from eeprom: %X\n",node_id);
 #endif  
-  rf230_set_pan_addr(
-	get_panid_from_eeprom(),
-	get_panaddr_from_eeprom(),
-	(uint8_t *)&addr.u8
-  );
-  rf230_set_channel(get_channel_from_eeprom());
-
   rimeaddr_set_node_addr(&addr); 
 
-  PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
+  rf230_set_pan_addr(params_get_panid(),params_get_panaddr(),(uint8_t *)&addr.u8);
+  rf230_set_channel(params_get_channel());
+  rf230_set_txpower(params_get_txpower());
+
+#if UIP_CONF_IPV6
+  PRINTA("EUI-64 MAC: %x-%x-%x-%x-%x-%x-%x-%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
+#else
+  PRINTA("MAC address ");
+  uint8_t i;
+  for (i=sizeof(rimeaddr_t); i>0; i--){
+    PRINTA("%x:",addr.u8[i-1]);
+  }
+  PRINTA("\n");
+#endif
 
   /* Initialize stack protocols */
   queuebuf_init();
@@ -319,7 +291,7 @@ uint8_t i;
   NETSTACK_NETWORK.init();
 
 #if ANNOUNCE_BOOT
-  PRINTA("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
+  PRINTA("%s %s, channel %u power %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel(),rf230_get_txpower());
   if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
     unsigned short tmp;
     tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
@@ -327,24 +299,18 @@ uint8_t i;
     if (tmp<65535) PRINTA(", check rate %u Hz",tmp);
   }
   PRINTA("\n");
-#endif
 
+#if UIP_CONF_IPV6_RPL
+  PRINTA("RPL Enabled\n");
+#endif
 #if UIP_CONF_ROUTER
-#if ANNOUNCE_BOOT
   PRINTA("Routing Enabled\n");
 #endif
-//  rime_init(rime_udp_init(NULL));
+
-// uip_router_register(&rimeroute);
+#endif /* ANNOUNCE_BOOT */
-#endif
 
   process_start(&tcpip_process, NULL);
 
-  #else
-/* mac process must be started before tcpip process! */
-  process_start(&mac_process, NULL);
-  process_start(&tcpip_process, NULL);
-#endif /*RF230BB*/
-
 #ifdef RAVEN_LCD_INTERFACE
   process_start(&raven_lcd_process, NULL);
 #endif
@@ -352,20 +318,17 @@ uint8_t i;
   /* Autostart other processes */
   autostart_start(autostart_processes);
 
-  //Give ourselves a prefix
-  // init_net();
-
   /*---If using coffee file system create initial web content if necessary---*/
 #if COFFEE_FILES
   int fa = cfs_open( "/index.html", CFS_READ);
   if (fa<0) {     //Make some default web content
-    PRINTF("No index.html file found, creating upload.html!\n");
+    PRINTA("No index.html file found, creating upload.html!\n");
     PRINTA("Formatting FLASH file system for coffee...");
     cfs_coffee_format();
     PRINTA("Done!\n");
     fa = cfs_open( "/index.html", CFS_WRITE);
     int r = cfs_write(fa, &"It works!", 9);
-    if (r<0) PRINTF("Can''t create /index.html!\n");
+    if (r<0) PRINTA("Can''t create /index.html!\n");
     cfs_close(fa);
 //  fa = cfs_open("upload.html"), CFW_WRITE);
 // <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
@@ -384,9 +347,8 @@ uint8_t i;
 
 /*--------------------------Announce the configuration---------------------*/
 #if ANNOUNCE_BOOT
-
 #if AVR_WEBSERVER
-  uint8_t i;
+{ uint8_t i;
   char buf[80];
   unsigned int size;
 
@@ -396,11 +358,15 @@ uint8_t i;
        PRINTA("IPv6 Address: %s\n",buf);
 	}
   }
-   eeprom_read_block (buf,server_name, sizeof(server_name));
+   cli();
-   buf[sizeof(server_name)]=0;
+   eeprom_read_block (buf,eemem_server_name, sizeof(eemem_server_name));
+   sei();
+   buf[sizeof(eemem_server_name)]=0;
    PRINTA("%s",buf);
-   eeprom_read_block (buf,domain_name, sizeof(domain_name));
+   cli();
-   buf[sizeof(domain_name)]=0;
+   eeprom_read_block (buf,eemem_domain_name, sizeof(eemem_domain_name));
+   sei();
+   buf[sizeof(eemem_domain_name)]=0;
    size=httpd_fs_get_size();
 #ifndef COFFEE_FILES
    PRINTA(".%s online with fixed %u byte web content\n",buf,size);
@@ -413,25 +379,40 @@ uint8_t i;
 #elif COFFEE_FILES==4
    PRINTA(".%s online with dynamic %u KB program memory file system\n",buf,size>>10);
 #endif /* COFFEE_FILES */
-
+}
 #else
    PRINTA("Online\n");
-#endif /* AVR_WEBSERVER */
-
-#endif /* ANNOUNCE_BOOT */
-}
-
-/*---------------------------------------------------------------------------*/
-void log_message(char *m1, char *m2)
-{
-  PRINTA("%s%s\n", m1, m2);
-}
-
-#if RF230BB
-extern char rf230_interrupt_flag, rf230processflag;
 #endif
+#endif /* ANNOUNCE_BOOT */
 
-uint16_t ledtimer;
+#if RF230BB_CONF_LEDONPORTE1
+  /* NB: PORTE1 conflicts with UART0 */
+  DDRE|=(1<<DDE1);  //set led pin to output (Micheal Hatrtman board)
+  PORTE&=~(1<<PE1); //and low to turn led off
+#endif
+}
+
+#if ROUTES && UIP_CONF_IPV6
+static void
+ipaddr_add(const uip_ipaddr_t *addr)
+{
+  uint16_t a;
+  int8_t i, f;
+  for(i = 0, f = 0; i < sizeof(uip_ipaddr_t); i += 2) {
+    a = (addr->u8[i] << 8) + addr->u8[i + 1];
+    if(a == 0 && f >= 0) {
+      if(f++ == 0) PRINTF("::");
+    } else {
+      if(f > 0) {
+        f = -1;
+      } else if(i > 0) {
+        PRINTF(":");
+      }
+      PRINTF("%x",a);
+    }
+  }
+}
+#endif
 
 /*-------------------------------------------------------------------------*/
 /*------------------------- Main Scheduler loop----------------------------*/
@@ -439,37 +420,25 @@ uint16_t ledtimer;
 int
 main(void)
 {
-
   initialize();
 
-#if RF230BB_CONF_LEDONPORTE1
-  /* NB: PORTE1 conflicts with UART0 */
-  DDRE|=(1<<DDE1);  //set led pin to output (Micheal Hatrtman board)
-  PORTE&=~(1<<PE1); //and low to turn led off
-#endif
-
   while(1) {
-     process_run();
+    process_run();
+    watchdog_periodic();
 
-#if DEBUGFLOWSIZE
-  if (debugflowsize) {
-    debugflow[debugflowsize]=0;
-    PRINTA("%s",debugflow);
-    debugflowsize=0;
-   }
-#endif
-
-#if RF230BB_CONF_LEDONPORTE1
     /* Turn off LED after a while */
     if (ledtimer) {
       if (--ledtimer==0) {
+#if RF230BB_CONF_LEDONPORTE1
         PORTE&=~(1<<PE1);
-    /* Currently LED was turned on by received ping; ping the other way for testing */
+#endif
-        extern void raven_ping6(void);         
+#if defined(RAVEN_LCD_INTERFACE)&&0
- //       raven_ping6(); //ping back
+       /* ledtimer can be set by received ping; ping the other way for testing */
+       extern void raven_ping6(void);         
+       raven_ping6();
+#endif
       }
     }
-#endif
 
 #if 0
 /* Various entry points for debugging in the AVR Studio simulator.
@@ -483,18 +452,26 @@ main(void)
     NETSTACK_RDC.input();
 #endif
 
-    watchdog_periodic();
 #if 0
 /* Clock.c can trigger a periodic PLL calibration in the RF230BB driver.
  * This can show when that happens.
  */
     extern uint8_t rf230_calibrated;
     if (rf230_calibrated) {
-      PRINTA("\nRF230 calibrated!\n");
+      PRINTD("\nRF230 calibrated!\n");
       rf230_calibrated=0;
     }
 #endif
 
+/* Set DEBUGFLOWSIZE in contiki-conf.h to track path through MAC, RDC, and RADIO */
+#if DEBUGFLOWSIZE
+  if (debugflowsize) {
+    debugflow[debugflowsize]=0;
+    PRINTF("%s",debugflow);
+    debugflowsize=0;
+   }
+#endif
+
 #if PERIODICPRINTS
 #if TESTRTIMER
 /* Timeout can be increased up to 8 seconds maximum.
@@ -516,9 +493,9 @@ if ((clocktime%STAMPS)==0) {
 	print_stats();
 #elif RADIOSTATS
 extern volatile unsigned long radioontime;
-  PRINTA("%u(%u)s\n",clocktime,radioontime);
+  PRINTF("%u(%u)s\n",clocktime,radioontime);
 #else
-  PRINTA("%us\n",clocktime);
+  PRINTF("%us\n",clocktime);
 #endif
 
 }
@@ -530,7 +507,7 @@ extern volatile unsigned long radioontime;
 #if PINGS && UIP_CONF_IPV6
 extern void raven_ping6(void); 
 if ((clocktime%PINGS)==1) {
-  PRINTA("**Ping\n");
+  PRINTF("**Ping\n");
   raven_ping6();
 }
 #endif
@@ -543,38 +520,38 @@ extern uip_ds6_route_t uip_ds6_routing_table[];
 extern uip_ds6_netif_t uip_ds6_if;
 
   uint8_t i,j;
-  PRINTA("\nAddresses [%u max]\n",UIP_DS6_ADDR_NB);
+  PRINTF("\nAddresses [%u max]\n",UIP_DS6_ADDR_NB);
   for (i=0;i<UIP_DS6_ADDR_NB;i++) {
     if (uip_ds6_if.addr_list[i].isused) {
-      uip_debug_ipaddr_print(&uip_ds6_if.addr_list[i].ipaddr);
+      ipaddr_add(&uip_ds6_if.addr_list[i].ipaddr);
-      PRINTA("\n");
+      PRINTF("\n");
     }
   }
-  PRINTA("\nNeighbors [%u max]\n",UIP_DS6_NBR_NB);
+  PRINTF("\nNeighbors [%u max]\n",UIP_DS6_NBR_NB);
   for(i = 0,j=1; i < UIP_DS6_NBR_NB; i++) {
     if(uip_ds6_nbr_cache[i].isused) {
-      uip_debug_ipaddr_print(&uip_ds6_nbr_cache[i].ipaddr);
+      ipaddr_add(&uip_ds6_nbr_cache[i].ipaddr);
-      PRINTA("\n");
+      PRINTF("\n");
       j=0;
     }
   }
-  if (j) PRINTA("  <none>");
+  if (j) PRINTF("  <none>");
-  PRINTA("\nRoutes [%u max]\n",UIP_DS6_ROUTE_NB);
+  PRINTF("\nRoutes [%u max]\n",UIP_DS6_ROUTE_NB);
   for(i = 0,j=1; i < UIP_DS6_ROUTE_NB; i++) {
     if(uip_ds6_routing_table[i].isused) {
-      uip_debug_ipaddr_print(&uip_ds6_routing_table[i].ipaddr);
+      ipaddr_add(&uip_ds6_routing_table[i].ipaddr);
-      PRINTA("/%u (via ", uip_ds6_routing_table[i].length);
+      PRINTF("/%u (via ", uip_ds6_routing_table[i].length);
-      uip_debug_ipaddr_print(&uip_ds6_routing_table[i].nexthop);
+      ipaddr_add(&uip_ds6_routing_table[i].nexthop);
  //     if(uip_ds6_routing_table[i].state.lifetime < 600) {
-        PRINTA(") %lus\n", uip_ds6_routing_table[i].state.lifetime);
+        PRINTF(") %lus\n", uip_ds6_routing_table[i].state.lifetime);
  //     } else {
- //       PRINTA(")\n");
+ //       PRINTF(")\n");
  //     }
       j=0;
     }
   }
-  if (j) PRINTA("  <none>");
+  if (j) PRINTF("  <none>");
-  PRINTA("\n---------\n");
+  PRINTF("\n---------\n");
 }
 #endif
 
@@ -584,7 +561,7 @@ if ((clocktime%STACKMONITOR)==3) {
   uint16_t p=(uint16_t)&__bss_end;
   do {
     if (*(uint16_t *)p != 0x4242) {
-      PRINTA("Never-used stack > %d bytes\n",p-(uint16_t)&__bss_end);
+      PRINTF("Never-used stack > %d bytes\n",p-(uint16_t)&__bss_end);
       break;
     }
     p+=10;
@@ -596,16 +573,18 @@ if ((clocktime%STACKMONITOR)==3) {
 #endif /* PERIODICPRINTS */
 
 #if RF230BB&&0
+extern uint8_t rf230processflag;
     if (rf230processflag) {
-      PRINTA("rf230p%d",rf230processflag);
+      PRINTF("rf230p%d",rf230processflag);
       rf230processflag=0;
     }
 #endif
 
 #if RF230BB&&0
+extern uint8_t rf230_interrupt_flag;
     if (rf230_interrupt_flag) {
  //   if (rf230_interrupt_flag!=11) {
-        PRINTA("**RI%u",rf230_interrupt_flag);
+        PRINTF("**RI%u",rf230_interrupt_flag);
  //   }
       rf230_interrupt_flag=0;
     }
@@ -613,3 +592,10 @@ if ((clocktime%STACKMONITOR)==3) {
   }
   return 0;
 }
+
+/*---------------------------------------------------------------------------*/
+
+void log_message(char *m1, char *m2)
+{
+  PRINTF("%s%s\n", m1, m2);
+}

platform/avr-atmega128rfa1/params.c

@@ -0,0 +1,264 @@
+/*
+ * Copyright (c) 2011, Swedish Institute of Computer Science.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+#define PRINTF(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
+
+#define DEBUG 1
+#if DEBUG
+#define PRINTD(FORMAT,args...) printf_P(PSTR(FORMAT),##args)
+#else
+#define PRINTD(...)
+#endif
+
+#include "contiki.h"
+#include <avr/pgmspace.h>
+#include <avr/eeprom.h>
+#include <stdio.h>
+#include <string.h>
+
+#if AVR_WEBSERVER
+//#include "httpd-fs.h"
+//#include "httpd-cgi.h"
+#endif
+
+#include "contiki-net.h"
+#include "params.h"
+
+#if WITH_NODE_ID
+uint16_t node_id;
+#endif
+
+#if CONTIKI_CONF_RANDOM_MAC
+extern uint8_t rng_get_uint8(void);
+static void
+generate_new_eui64(uint8_t eui64[8]) {
+  eui64[0] = 0x02;
+  eui64[1] = rng_get_uint8();
+  eui64[2] = rng_get_uint8();
+  eui64[3] = 0xFF;
+  eui64[4] = 0xFE;
+  eui64[5] = rng_get_uint8();
+  eui64[6] = rng_get_uint8();
+  eui64[7] = rng_get_uint8();
+}
+#endif
+
+#if AVR_WEBSERVER
+/* Webserver builds can set these in httpd-fsdata.c via makefsdata.h */
+extern uint8_t default_mac_address[8];
+extern uint8_t default_server_name[16];
+extern uint8_t default_domain_name[30];
+#else
+uint8_t default_mac_address[8] PROGMEM = PARAMS_EUI64ADDR;
+uint8_t default_server_name[] PROGMEM = PARAMS_SERVERNAME;
+uint8_t default_domain_name[] PROGMEM = PARAMS_DOMAINNAME;
+#endif
+
+#if PARAMETER_STORAGE==0
+/* 0 Hard coded, minmal program and eeprom usage. */
+uint8_t
+params_get_eui64(uint8_t *eui64) {
+#if CONTIKI_CONF_RANDOM_MAC
+    PRINTD("Generating random EUI64 MAC\n");
+    generate_new_eui64(eui64);
+    return 1;
+#else
+    uint8_t i;
+    for (i=0;i<sizeof(default_mac_address);i++) eui64[i] = pgm_read_byte_near(default_mac_address+i);
+    return 0;
+#endif
+}
+#elif PARAMETER_STORAGE==1
+/* 1 Stored in fixed eeprom locations, rewritten from flash if corrupt.
+ * They can be manually changed and kept over program reflash.
+ * The channel and bit complement are used to check EEMEM integrity,
+ * If corrupt all values will be rewritten with the default flash values.
+ * To make this work, get the channel before anything else.
+ */
+#if !AVR_WEBSERVER
+uint8_t eemem_mac_address[] EEMEM = PARAMS_EUI64ADDR;
+uint8_t eemem_server_name[] EEMEM = PARAMS_SERVERNAME;
+uint8_t eemem_domain_name[] EEMEM = PARAMS_DOMAINNAME;
+#endif /*AVR_WEBSERVER */
+
+uint16_t eemem_nodeid EEMEM = PARAMS_NODEID;
+uint8_t eemem_channel[2] EEMEM = {PARAMS_CHANNEL, ~PARAMS_CHANNEL};
+uint16_t eemem_panid EEMEM = PARAMS_PANID;
+uint16_t eemem_panaddr EEMEM = PARAMS_PANADDR;
+uint8_t eemem_txpower EEMEM = PARAMS_TXPOWER;
+
+#if CONTIKI_CONF_RANDOM_MAC
+static uint8_t randomeui64;
+#endif
+
+uint8_t
+params_get_channel(void) {
+  uint8_t x[2];
+  *(uint16_t *)x = eeprom_read_word ((uint16_t *)&eemem_channel);
+/* Don't return an invalid channel number */
+  if( (x[0]<11) || (x[0] > 26)) x[1]=x[0];
+/* Do exclusive or test on the two values read */
+  if((uint8_t)x[0]!=(uint8_t)~x[1]) {//~x[1] can promote comparison to 16 bit
+/* Verification fails, rewrite everything */
+    uint8_t i,buffer[32];
+    PRINTD("EEPROM is corrupt, rewriting with defaults.\n");
+#if CONTIKI_CONF_RANDOM_MAC
+    PRINTD("Generating random EUI64 MAC\n");
+    generate_new_eui64(&buffer);
+    randomeui64=1;
+#else
+    for (i=0;i<sizeof(default_mac_address);i++) buffer[i] = pgm_read_byte_near(default_mac_address+i);
+#endif
+/* eeprom_write_block should not be interrupted */
+    cli();
+    eeprom_write_block(&buffer,  &eemem_mac_address, sizeof(eemem_mac_address));
+    for (i=0;i<sizeof(default_server_name);i++) buffer[i] = pgm_read_byte_near(default_server_name+i);
+    eeprom_write_block(&buffer,  &eemem_server_name, sizeof(eemem_server_name));
+    for (i=0;i<sizeof(default_domain_name);i++) buffer[i] = pgm_read_byte_near(default_domain_name+i);
+    eeprom_write_block(&buffer,  &eemem_domain_name, sizeof(eemem_domain_name));
+    eeprom_write_word(&eemem_panid  , PARAMS_PANID);
+    eeprom_write_word(&eemem_panaddr, PARAMS_PANADDR);
+    eeprom_write_byte(&eemem_txpower, PARAMS_TXPOWER);
+    eeprom_write_word(&eemem_nodeid, PARAMS_NODEID);
+    x[0] = PARAMS_CHANNEL;
+    x[1]= ~x[0];
+    eeprom_write_word((uint16_t *)&eemem_channel, *(uint16_t *)x);
+    sei();
+  }
+/* Always returns a valid channel */
+  return x[0];
+}
+uint8_t
+params_get_eui64(uint8_t *eui64) {
+  cli();
+  eeprom_read_block ((void *)eui64, &eemem_mac_address, sizeof(rimeaddr_t));
+  sei();
+#if CONTIKI_CONF_RANDOM_MAC
+  return randomeui64;
+#else
+  return 0;
+#endif
+}
+uint16_t
+params_get_panid(void) {
+  return eeprom_read_word(&eemem_panid);
+}
+uint16_t
+params_get_panaddr(void) {
+  return eeprom_read_word (&eemem_panaddr);
+}
+uint8_t
+params_get_txpower(void)
+{
+  return eeprom_read_byte(&eemem_txpower);
+}
+
+#else /* CONTIKI_CONF_SETTINGS_MANAGER */
+
+uint8_t
+params_get_channel() {
+  uint8_t x;
+  size_t  size = 1;
+  if (settings_get(SETTINGS_KEY_CHANNEL, 0,(unsigned char*)&x, &size) == SETTINGS_STATUS_OK) {
+    PRINTD("<-Get RF channel %u\n",x);
+  } else {
+    x = PARAMS_CHANNEL;
+    if (settings_add_uint8(SETTINGS_KEY_CHANNEL,x ) == SETTINGS_STATUS_OK) {
+      PRINTD("->Set EEPROM RF channel to %d\n",x);
+    }
+  }
+  return x;
+}
+uint8_t
+params_get_eui64(uint8_t *eui64) {
+  size_t size = sizeof(rimeaddr_t); 
+  if(settings_get(SETTINGS_KEY_EUI64, 0, (unsigned char*)eui64, &size) == SETTINGS_STATUS_OK) {
+    PRINTD("<-Get EUI64 MAC\n");
+    return 0;		
+  }
+#if CONTIKI_CONF_RANDOM_MAC
+  PRINTD("Generating random EUI64 MAC\n");
+  generate_new_eui64(eui64);
+#else
+  {uint8_t i;for (i=0;i<8;i++) eui64[i] = pgm_read_byte_near(default_mac_address+i);} //test this
+#endif
+  if (settings_add(SETTINGS_KEY_EUI64,(unsigned char*)eui64,8) == SETTINGS_STATUS_OK) {
+    PRINTD("->Set EEPROM MAC address\n");
+  }
+#if CONTIKI_CONF_RANDOM_MAC
+  return 1;
+#else
+  return 0;
+#endif
+}
+uint16_t
+params_get_panid(void) {
+  uint16_t x;
+  size_t  size = 2;
+  if (settings_get(SETTINGS_KEY_PAN_ID, 0,(unsigned char*)&x, &size) == SETTINGS_STATUS_OK) {
+    PRINTD("<-Get PAN ID of %04x\n",x);
+  } else {
+    x=PARAMS_PANID;
+    if (settings_add_uint16(SETTINGS_KEY_PAN_ID,x)==SETTINGS_STATUS_OK) {
+      PRINTD("->Set EEPROM PAN ID to %04x\n",x);
+    }
+  }
+  return x;
+}
+uint16_t
+params_get_panaddr(void) {
+  uint16_t x;
+  size_t  size = 2;
+  if (settings_get(SETTINGS_KEY_PAN_ADDR, 0,(unsigned char*)&x, &size) == SETTINGS_STATUS_OK) {
+    PRINTD("<-Get PAN address of %04x\n",x);
+  } else {
+    x=PARAMS_PANADDR;
+    if (settings_add_uint16(SETTINGS_KEY_PAN_ADDR,x)==SETTINGS_STATUS_OK) {
+      PRINTD("->Set EEPROM PAN address to %04x\n",x);
+    }
+  }        
+  return x;
+}
+uint8_t
+params_get_txpower(void) {
+  uint8_t x;
+  size_t  size = 1;
+  if (settings_get(SETTINGS_KEY_TXPOWER, 0,(unsigned char*)&x, &size) == SETTINGS_STATUS_OK) {
+    PRINTD("<-Get tx power of %d (0=max)\n",x);
+  } else {
+    x=PARAMS_TXPOWER;
+    if (settings_add_uint8(SETTINGS_KEY_TXPOWER,x)==SETTINGS_STATUS_OK) {
+      PRINTD("->Set EEPROM tx power of %d (0=max)\n",x);
+    }
+  }
+  return x;
+}
+#endif /* CONTIKI_CONF_SETTINGS_MANAGER */

platform/avr-atmega128rfa1/params.h

@@ -0,0 +1,108 @@
+#ifndef __PARAMS_H__
+#define __PARAMS_H__
+/* PARAMETER_STORAGE =
+ * 0 Hard coded, minmal program and eeprom usage.
+ * 1 Stored in fixed eeprom locations, rewritten from flash if corrupt.
+ *   This allows parameter changes using a hardware programmer or custom application code.
+ *   Corruption test is based on channel verify so get the channel before anything else!
+ * 2 Obtained from eeprom using the general settings manager and read from program flash if not present.
+ *   Useful for for testing builds without wearing out flash memory.
+ * 3 Obtained from eeprom using the settings manager and rewritten from flash if not present.
+ *   This ensures all parameters are present in upper eeprom flash.
+ *
+ * Note the parameters in this file can be changed without forcing a complete rebuild.
+ */
+#define CONTIKI_CONF_RANDOM_MAC 0        //adds 78 bytes
+#define CONTIKI_CONF_SETTINGS_MANAGER 0  //adds 1696 bytes
+
+#if CONTIKI_CONF_SETTINGS_MANAGER
+//#define PARAMETER_STORAGE 2
+#define PARAMETER_STORAGE 2
+#else
+#define PARAMETER_STORAGE 1
+#endif
+
+/* Include settings.h, then dummy out the write routines */
+#include "settings.h"
+#if PARAMETER_STORAGE==2
+#define settings_add(...) 0
+#define settings_add_uint8(...) 0
+#define settings_add_uint16(...) 0
+#endif
+
+#if AVR_WEBSERVER
+/* Webserver builds can set some defaults in httpd-fsdata.c via makefsdata.h */
+extern uint8_t eemem_mac_address[8];
+extern uint8_t eemem_server_name[16];
+extern uint8_t eemem_domain_name[30];
+#endif
+
+#ifdef SERVER_NAME
+#define PARAMS_SERVERNAME SERVER_NAME
+#else
+#define PARAMS_SERVERNAME "ATMEGA128rfa1"
+#endif
+#ifdef DOMAIN_NAME
+#define PARAMS_DOMAINNAME DOMAIN_NAME
+#else
+#define PARAMS_DOMAINNAME "localhost"
+#endif
+#ifdef NODE_ID
+#define PARAMS_NODEID NODE_ID
+#else
+#define PARAMS_NODEID 0
+#endif
+#ifdef CHANNEL_802_15_4
+#define PARAMS_CHANNEL CHANNEL_802_15_4
+#else
+#define PARAMS_CHANNEL 26
+#endif
+#ifdef IEEE802154_PANID
+#define PARAMS_PANID IEEE802154_PANID
+#else
+#define PARAMS_PANID 0xABCD
+#endif
+#ifdef IEEE802154_PANADDR
+#define PARAMS_PANADDR IEEE802154_PANADDR
+#else
+#define PARAMS_PANADDR 0
+#endif
+#ifdef RF230_MAX_TX_POWER
+#define PARAMS_TXPOWER RF230_MAX_TX_POWER
+#else
+#define PARAMS_TXPOWER 0
+#endif
+#ifdef EUI64_ADDRESS
+#define PARAMS_EUI64ADDR EUI64_ADDRESS
+#else
+/* This form of of EUI64 mac allows full 6LoWPAN header compression from mac address */
+#if UIP_CONF_LL_802154
+//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN}
+#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01}
+#else
+//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xff, 0xfe, 0xNN, 0xNN, 0xNN}
+#define PARAMS_EUI64ADDR {0x00, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01}
+#endif
+/* This form of of EUI64 mac allows 16 bit 6LoWPAN header compression on multihops */
+//#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0xNN, 0xNN}
+#endif
+
+uint8_t params_get_eui64(uint8_t *eui64);
+#if PARAMETER_STORAGE==0
+/* Hard coded program flash parameters */
+#define params_get_servername(...) 
+#define params_get_nodeid(...) PARAMS_NODEID
+#define params_get_channel(...) PARAMS_CHANNEL
+#define params_get_panid(...) PARAMS_PANID
+#define params_get_panaddr(...) PARAMS_PANADDR
+#define params_get_txpower(...) PARAMS_TXPOWER
+#else
+/* Parameters stored in eeprom */
+uint16_t params_get_nodeid(void);
+uint8_t params_get_channel(void);
+uint16_t params_get_panid(void);
+uint16_t params_get_panaddr(void);
+uint8_t params_get_txpower(void);
+#endif
+
+#endif /* __PARAMS_H__ */