deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

change plattform to osd-merkur

Browse source
This commit is contained in:
harald42 2013-02-19 10:58:41 +01:00 committed by harald
parent b6c7cc8672
commit 618a516182
3 changed files with 15 additions and 26 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

28
examples/osd/pir-sensor/README
View file

@ -1,7 +1,14 @@
A Quick Introduction to the Erbium (Er) REST Engine A Quick Introduction to the Erbium (Er) REST Engine
=================================================== ===================================================
Compile the Example
-------------------
./run.sh
sudo avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-server.osd-er-lp24.hex:a -U eeprom:w:er-example-server.osd-er-lp24.eep:a OSD-Merkur Board
----------------------
write the images to the OSD-Merkur Board:
./flash.sh
EXAMPLE FILES EXAMPLE FILES
------------- -------------
@ -40,25 +47,6 @@ With client:
4) Wait until red LED toggles on mote 2 (server) 4) Wait until red LED toggles on mote 2 (server)
5) Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output 5) Choose "Click button on Sky 3" from the context menu of mote 3 (client) and watch serial output
TMOTES HOWTO
------------
Server:
1) Connect two Tmote Skys (check with $ make TARGET=sky sky-motelist)
2) $ make TARGET=sky er-example-server.upload MOTE=2
3) $ make TARGET=sky login MOTE=2
4) Press reset button, get address, abort with Ctrl+C:
Line: "Tentative link-local IPv6 address fe80:0000:0000:0000:____:____:____:____"
5) $ cd ../ipv6/rpl-border-router/
6) $ make TARGET=sky border-router.upload MOTE=1
7) $ make connect-router
For a BR tty other than USB0: $ make connect-router-port PORT=X
8) Start Copper and discover resources at coap://[aaaa::____:____:____:____]:5683/
Add a client:
1) Change the hard-coded server address in er-example-client.c to aaaa::____:____:____:____
2) Connect a third Tmote Sky
3) $ make TARGET=sky er-example-client.upload MOTE=3
DETAILS DETAILS
------- -------
Erbium currently implements draft 08 (name "er-coap-07" stems from last technical draft changes). Erbium currently implements draft 08 (name "er-coap-07" stems from last technical draft changes).

2
examples/osd/pir-sensor/flash.sh Executable file
View file

@ -0,0 +1,2 @@
#!/bin/bash
sudo avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U flash:w:er-example-server.osd-merkur.hex:a -U eeprom:w:er-example-server.osd-merkur.eep:a

11
examples/osd/pir-sensor/run.sh
View file

@ -1,7 +1,6 @@
#!/bin/bash #!/bin/bash
make clean TARGET=osd-er-lp24 make clean TARGET=osd-merkur
make TARGET=osd-er-lp24 make TARGET=osd-merkur
avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-er-lp24 avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-er-lp24 er-example-server.osd-er-lp24.hex avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-er-lp24 er-example-server.osd-er-lp24.eep avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep