Add CC26xx CPU files

cpu/cc26xx/dev/rfc-api/ieee_mailbox.h

@@ -0,0 +1,107 @@
+/******************************************************************************
+*  Filename:       ieee_mailbox.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    Definitions for IEEE 802.15.4 interface
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef _IEEE_MAILBOX_H
+#define _IEEE_MAILBOX_H
+
+#include "mailbox.h"
+
+/// \name CPE interrupt definitions for IEEE 802.15.4
+/// Interrupt masks for the CPE interrupt in RDBELL. These are new names for interrupts in mailbox.h,
+/// used for compartibility with previous versions with separate interrupt numbers.
+///@{
+#define IRQN_IEEE_BG_COMMAND_SUSPENDED IRQN_BG_COMMAND_SUSPENDED
+#define IRQN_IEEE_TX_FRAME             IRQN_TX_DONE
+#define IRQN_IEEE_TX_ACK               IRQN_TX_ACK
+
+#define IRQN_IEEE_RX_FRAME             IRQN_RX_OK
+#define IRQN_IEEE_RX_NOK               IRQN_RX_NOK
+#define IRQN_IEEE_RX_IGNORED           IRQN_RX_IGNORED
+#define IRQN_IEEE_RX_BUF_FULL          IRQN_RX_BUF_FULL
+#define IRQN_IEEE_RX_ENTRY_DONE        IRQN_RX_ENTRY_DONE
+
+#define IRQ_IEEE_BG_COMMAND_SUSPENDED  (1U << IRQN_IEEE_BG_COMMAND_SUSPENDED)
+#define IRQ_IEEE_TX_FRAME              (1U << IRQN_IEEE_TX_FRAME)
+#define IRQ_IEEE_TX_ACK                (1U << IRQN_IEEE_TX_ACK)
+#define IRQ_IEEE_RX_FRAME              (1U << IRQN_IEEE_RX_FRAME)
+#define IRQ_IEEE_RX_NOK                (1U << IRQN_IEEE_RX_NOK)
+#define IRQ_IEEE_RX_IGNORED            (1U << IRQN_IEEE_RX_IGNORED)
+#define IRQ_IEEE_RX_BUF_FULL           (1U << IRQN_IEEE_RX_BUF_FULL)
+#define IRQ_IEEE_RX_ENTRY_DONE         (1U << IRQN_IEEE_RX_ENTRY_DONE)
+///@}
+
+
+
+/// \name Radio operation status
+/// Radio operation status format:
+/// Bits 15:12: Protocol
+///             0010: IEEE 802.15.4
+/// Bits 11:10: Type
+///             00: Not finished
+///             01: Done successfully
+///             10: Done with error
+/// Bits 9:0:   Identifier
+
+/// \name Operation not finished
+///@{
+#define IEEE_SUSPENDED          0x2001  ///< Operation suspended
+///@}
+/// \name Operation finished normally
+///@{
+#define IEEE_DONE_OK            0x2400  ///< Operation ended normally
+#define IEEE_DONE_BUSY          0x2401  ///< CSMA-CA operation ended with failure
+#define IEEE_DONE_STOPPED       0x2402  ///< Operation stopped after stop command
+#define IEEE_DONE_ACK           0x2403  ///< ACK packet received with pending data bit cleared
+#define IEEE_DONE_ACKPEND       0x2404  ///< ACK packet received with pending data bit set
+#define IEEE_DONE_TIMEOUT       0x2405  ///< Operation ended due to timeout
+#define IEEE_DONE_BGEND         0x2406  ///< FG operation ended because necessary background level
+                                        ///< operation ended 
+#define IEEE_DONE_ABORT         0x2407  ///< Operation aborted by command
+///@}
+/// \name Operation finished with error
+///@{
+#define IEEE_ERROR_PAR          0x2800  ///< Illegal parameter
+#define IEEE_ERROR_NO_SETUP     0x2801  ///< Operation using Rx or Tx attemted when not in 15.4 mode
+#define IEEE_ERROR_NO_FS        0x2802  ///< Operation using Rx or Tx attemted without frequency synth configured
+#define IEEE_ERROR_SYNTH_PROG   0x2803  ///< Synthesizer programming failed to complete on time
+#define IEEE_ERROR_RXOVF        0x2804  ///< Receiver overflowed during operation
+#define IEEE_ERROR_TXUNF        0x2805  ///< Transmitter underflowed during operation
+///@}
+///@}
+
+#endif