deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Merge pull request #266 from ismb-pert/fix-mbxxx

Browse source 
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
This commit is contained in:
Mariano Alvira 2013-07-26 07:38:11 -07:00
parent d228cb57a5 36e7db42de
commit 5d19de3dbf
124 changed files with 2039 additions and 2777 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
.gitignore vendored
View file

@ -17,7 +17,7 @@
*.esb
*.avr-raven
*.exp5438
*.mb851
*.mbxxx
*.win32
*.apple2enh
*.atari

28
cpu/stm32w108/Makefile.stm32w108
View file

@ -68,16 +68,17 @@ STRIP = strip
ifndef DEBUG
OPTI = -Ohz --no_unroll
endif
CFLAGSNO = --endian=little --cpu=Cortex-M3 -e --diag_suppress Pa050 -D BOARD_HEADER=\"board.h\" \
CFLAGSNO = --debug --endian=little --cpu=Cortex-M3 -e --diag_suppress Pa050 -D BOARD_HEADER=\"board.h\" \
-D BOARD_MB851 -D "PLATFORM_HEADER=\"hal/micro/cortexm3/compiler/iar.h\"" -D CORTEXM3 \
-D CORTEXM3_STM32W108 -D PHY_STM32W108XX -D DISABLE_WATCHDOG -D ENABLE_ADC_EXTENDED_RANGE_BROKEN \
-D __SOURCEFILE__=\"$*.c\" -lC $(OBJECTDIR) \
-I $(CONTIKI)/../iar-files \
-I $(IAR_PATH)/arm/inc --dlib_config=DLib_Config_Normal.h
CFLAGS += $(CFLAGSNO) $(OPTI)
CFLAGS += $(CFLAGSNO) $(OPTI) -D__ICCARM__
AROPTS = --create
ASFLAGS = -s+ -w+ --cpu Cortex-M3 -L$(OBJECTDIR)
LDFLAGS += --redirect _Printf=_PrintfSmall --redirect _Scanf=_ScanfSmall --map=contiki-$(TARGET).map
LDFLAGS += --semihosting --redirect _Printf=_PrintfSmall --redirect _Scanf=_ScanfSmall --map=contiki-$(TARGET).map
ifndef COFFEE
LDFLAGS+= --config $(CONTIKI_CPU)/iar-cfg.icf
endif
@ -97,19 +98,30 @@ ifndef DEBUG
OPTI = -Os -ffunction-sections
endif
ifeq ($(STM32W_CPUREV), CC)
LD-EXT=-stm32w108CC
${warning "using stm32w108CC specific ld file"}
else ifeq ($(STM32W_CPUREV), xB)
LD-EXT=-stm32w108xB
${warning "using stm32w108xB specific ld file"}
else
${error "No STM32W_CPUREV specified. Cpu revision should be specified. Please read cpu/stm32w108/README.txt for more details."}
endif
CFLAGSNO = -mthumb -mcpu=cortex-m3 -D "PLATFORM_HEADER=\"hal/micro/cortexm3/compiler/gnu.h\"" \
-D BOARD_HEADER=\"board.h\" -g -Wall -Wno-strict-aliasing -mlittle-endian \
-D BOARD_MB851 -D CORTEXM3 -D CORTEXM3_STM32W108 -D PHY_STM32W108XX -D DISABLE_WATCHDOG -D ENABLE_ADC_EXTENDED_RANGE_BROKEN \
-D CORTEXM3 -D CORTEXM3_STM32W108 -D PHY_STM32W108XX -D DISABLE_WATCHDOG -D ENABLE_ADC_EXTENDED_RANGE_BROKEN \
-D __SOURCEFILE__=\"$*.c\"
CFLAGS += $(CFLAGSNO) $(OPTI)
ASFLAGS = -mthumb -mcpu=cortex-m3 -c -g -Wall -Os -ffunction-sections \
-mlittle-endian -fshort-enums -x assembler-with-cpp -Wa,-EL
ifndef CPU_LD_CONFIG
CPU_LD_CONFIG=$(CONTIKI_CPU)/gnu.ld
CPU_LD_CONFIG=$(CONTIKI_CPU)/gnu$(LD-EXT).ld
endif # CPU_LD_CONFIG
LDFLAGS += -mcpu=cortex-m3 \
LDFLAGS += -L$(CONTIKI_CPU)\
-mcpu=cortex-m3 \
-mthumb \
-Wl,-T -Xlinker $(CPU_LD_CONFIG) \
-Wl,-static \
@ -302,8 +314,8 @@ endif
# a target that gives a user-friendly memory profile, taking into account the RAM
# that is statically occupied by the stack as defined in cpu/stm32w108/gnu.ld
RAM_SIZE = 8192
FLASH_SIZE = 128*1024
RAM_SIZE = 2*8192
FLASH_SIZE = 2*128*1024
STACK_SIZE = 1280
%.size: %.$(TARGET)
@size -A $< | egrep "data|bss" | awk '{s+=$$2} END {s=s+$(STACK_SIZE); f=$(RAM_SIZE)-s; printf "[RAM] used %6d, free %6d\n",s,f;}'

22
cpu/stm32w108/README.txt Normal file
View file

@ -0,0 +1,22 @@
Building instructions.
In order to build your applications you need to find out the right cpu revision for the board you are using.
Valid STM32W_CPUREV values are CC or xB
Examples:
The MB851RevD board has a cpu with code
stm32w 108CCU7
so CC is your STM32W_CPUREV value and the command is
make TARGET=mbxxx STM32W_CPUREV=CC ...
or
The MB851RevC board has a cpu with code
stm32w 108CBU6
so xB is your STM32W_CPUREV value.
make TARGET=mbxxx STM32W_CPUREV=xB ...
NOTE: if the last word is B you need to use x as wildcard.

2
cpu/stm32w108/board-sensors.h
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/cfs-coffee-arch.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/cfs-coffee-arch.h
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/clock.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/elfloader-arch.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

177
cpu/stm32w108/gnu-stm32w108.ld Normal file
View file

@ -0,0 +1,177 @@
/* default stack sizes.
These are used by the startup in order to allocate stacks for the different modes.
*/
__Stack_Size = 0x500 ;
PROVIDE ( _Stack_Size = __Stack_Size ) ;
__Stack_Init = 0x20000000;
_estack = __Stack_Init + __Stack_Size;
/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/
PROVIDE ( _Stack_Init = __Stack_Init ) ;
/* Sections management for FLASH mode */
/* Sections Definitions */
SECTIONS
{
/* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */
.isr_vector (DEFINED(ST_BTL) ? (0x08000000 + _BOOTLOADER_SIZE) : 0x08000000) :
{
. = ALIGN(4);
__ApplicationFlashStart = . ;
/* . = . + _ROM_base ;*/
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >ROM_region
/* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */
.flashtext :
{
. = ALIGN(4);
*(.flashtext) /* Startup code */
. = ALIGN(4);
} >ROM_region
/* the program code is stored in the .text section, which goes to Flash */
.text :
{
. = ALIGN(4);
*(.text) /* remaining code */
*(.text.*) /* remaining code */
*(.rodata) /* read-only data (constants) */
*(.rodata*)
*(.glue_7)
*(.glue_7t)
. = ALIGN(4);
_etext = .;
/* This is used by the startup in order to initialize the .data section */
_sidata = _etext;
} >ROM_region
/*
NVM (NOLOAD):
{
. = ALIGN(1024);
*(NVM)
. = ALIGN(4);
} > NVM_region
*/
/* This is to emulate place at end of IAR linker */
NVM (ORIGIN(ROM_region) + LENGTH(ROM_region) - _NVM_size) (NOLOAD):
{
*(NVM)
} > ROM_region
FAT (NOLOAD) :
{
. = ALIGN(4);
KEEP(*(FAT))
. = ALIGN(4);
} > FIB_region
/*
.FAT (NOLOAD):
{
KEEP(*(.FAT))
} > FIB_region
*/
/* after that it's only debugging information. */
/* This is the initialized data section
The program executes knowing that the data is in the RAM
but the loader puts the initial values in the FLASH (inidata).
It is one task of the startup to copy the initial values from FLASH to RAM. */
.data _estack : AT ( _sidata )
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data section */
_sdata = . ;
*(.data)
*(.data.*)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data section */
_edata = . ;
} >RAM_region
/* This is the uninitialized data section */
.bss :
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss section */
_sbss = .;
*(.bss)
*(.bss.*)
*(COMMON)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss section */
_ebss = . ;
} >RAM_region
PROVIDE ( end = _ebss );
PROVIDE ( _end = _ebss );
__exidx_start = .;
__exidx_end = .;
/* remove the debugging information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
__ApplicationFlashEnd = _sidata + (_edata - _sdata);
__RAMStart = __Stack_Init;
__RAMEnd = _ebss;

16
cpu/stm32w108/gnu-stm32w108CC.ld Normal file
View file

@ -0,0 +1,16 @@
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
_BOOTLOADER_SIZE = 0 ;
/* This value needs to be fine tuned if the NVM section grows */
_NVM_size = 0x1000;
/* include the memory spaces definitions sub-script */
MEMORY
{
RAM_region (xrw) : ORIGIN = 0x20000000, LENGTH = 16K
ROM_region (rx) : ORIGIN = 0x08000000, LENGTH = 256K
FIB_region (ra) : ORIGIN = 0x08040000, LENGTH = 2K
}
INCLUDE "gnu-stm32w108.ld"

17
cpu/stm32w108/gnu-stm32w108xB.ld Normal file
View file

@ -0,0 +1,17 @@
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
/* Size of IAP bootloader */
_BOOTLOADER_SIZE = 0x3000 ;
/* This value needs to be fine tuned if the NVM section grows */
_NVM_size = 0x800;
/* include the memory spaces definitions sub-script */
MEMORY
{
RAM_region (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
ROM_region (rx) : ORIGIN = 0x08000000, LENGTH = 128K
FIB_region (ra) : ORIGIN = 0x08040000, LENGTH = 2K
}
INCLUDE "gnu-stm32w108.ld"

1
cpu/stm32w108/gnu.ld
View file

@ -21,7 +21,6 @@ __Stack_Init = 0x20000000;
_estack = __Stack_Init + __Stack_Size;
/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/
PROVIDE ( _Stack_Init = __Stack_Init ) ;

149
cpu/stm32w108/hal/micro/cortexm3/cstartup-m.s Normal file
View file

@ -0,0 +1,149 @@
/**************************************************
*
* Part one of the system initialization code, contains low-level
* initialization, plain thumb variant.
*
* Customized by St Corporation for STM32W
*<!--(C) COPYRIGHT 2010 STMicroelectronics. All rights reserved. -->
*
**************************************************/
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD __iar_program_start
;; Standard Cortex-M3 Vectors
DCD NMI_Handler ;;NMI Handler
DCD HardFault_Handler ;;Hard Fault Handler
DCD MemManage_Handler ;;Memory Fault Handler
DCD BusFault_Handler ;;Bus Fault Handler
DCD UsageFault_Handler ;;Usage Fault Handler
DCD 0 ;;Reserved
DCD 0 ;;Reserved
DCD 0 ;;Reserved
DCD 0 ;;Reserved
DCD SVC_Handler ;;SVCall Handler
DCD DebugMon_Handler ;;Debug Monitor Handler
DCD 0 ;;Reserved
DCD PendSV_Handler ;;PendSV Handler
DCD SysTick_Handler ;;SysTick Handler
;; STM32W Vectors
DCD halTimer1Isr ;;Timer 1 Handler
DCD halTimer2Isr ;;Timer 2 Handler
DCD halManagementIsr ;;Management Handler
DCD halBaseBandIsr ;;BaseBand Handler
DCD halSleepTimerIsr ;;Sleep Timer Handler
DCD halSc1Isr ;;SC1 Handler
DCD halSc2Isr ;;SC2 Handler
DCD halSecurityIsr ;;Security Handler
DCD halStackMacTimerIsr ;;MAC Timer Handler
DCD stmRadioTransmitIsr ;;MAC TX Handler
DCD stmRadioReceiveIsr ;;MAC RX Handler
DCD halAdcIsr ;;ADC Handler
DCD halIrqAIsr ;;GPIO IRQA Handler
DCD halIrqBIsr ;;GPIO IRQB Handler
DCD halIrqCIsr ;;GPIO IRQC Handler
DCD halIrqDIsr ;;GPIO IRQD Handler
DCD halDebugIsr ;;Debug Handler
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
PUBWEAK NMI_Handler
PUBWEAK HardFault_Handler
PUBWEAK MemManage_Handler
PUBWEAK BusFault_Handler
PUBWEAK UsageFault_Handler
PUBWEAK SVC_Handler
PUBWEAK DebugMon_Handler
PUBWEAK PendSV_Handler
PUBWEAK SysTick_Handler
PUBWEAK halTimer1Isr
PUBWEAK halTimer2Isr
PUBWEAK halManagementIsr
PUBWEAK halBaseBandIsr
PUBWEAK halSleepTimerIsr
PUBWEAK halSc1Isr
PUBWEAK halSc2Isr
PUBWEAK halSecurityIsr
PUBWEAK halStackMacTimerIsr
PUBWEAK stmRadioTransmitIsr
PUBWEAK stmRadioReceiveIsr
PUBWEAK halAdcIsr
PUBWEAK halIrqAIsr
PUBWEAK halIrqBIsr
PUBWEAK halIrqCIsr
PUBWEAK halIrqDIsr
PUBWEAK halDebugIsr
SECTION .text:CODE:REORDER(1)
THUMB
NMI_Handler
HardFault_Handler
MemManage_Handler
BusFault_Handler
UsageFault_Handler
SVC_Handler
DebugMon_Handler
PendSV_Handler
SysTick_Handler
halTimer1Isr
halTimer2Isr
halManagementIsr
halBaseBandIsr
halSleepTimerIsr
halSc1Isr
halSc2Isr
halSecurityIsr
halStackMacTimerIsr
stmRadioTransmitIsr
stmRadioReceiveIsr
halAdcIsr
halIrqAIsr
halIrqBIsr
halIrqCIsr
halIrqDIsr
halDebugIsr
Default_Handler
B Default_Handler
END

2
cpu/stm32w108/leds-arch.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/mtarch.h
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/rand.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/rtimer-arch.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/rtimer-arch.h
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/slip-uart1.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/uip-arch.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

2
cpu/stm32w108/watchdog.c
View file

@ -1,5 +1,5 @@
/**
* \addtogroup mb851-platform
* \addtogroup mbxxx-platform
*
* @{
*/

1
examples/mb851/acc-sensor/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/button/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/coffee-test/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/mb851-shell/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/mb851-websense/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

49
examples/mb851/shell-exec/README.md
View file

@ -1,49 +0,0 @@
ELFloader and shell command 'exec' example for MB851 (STM32W) platform
-----------------------------------------------------------
Compiles the Contiki hello-world application as a Contiki executable (.ce).
The Contiki executable is then uploaded to the MB851 platform via serial, and
is stored in the filesystem. Finally, the executable is loaded via the shell
command 'exec'.
NOTE:
You may have to reduce the ELF loader memory usage (/platform/sky/contiki-conf.h).
Since hello-world uses very little memory:
#define ELFLOADER_CONF_DATAMEMORY_SIZE 0x100
#define ELFLOADER_CONF_TEXTMEMORY_SIZE 0x100
1. Upload Sky shell with 'exec' command and symbols (requires several
recompilations to generate correct symbols):
make
make CORE=shell-exec-test.mb851
make shell-exec-test.flash CORE=shell-exec-test.mb851 PORT=AUTO
2. Verify access to the shell and the filesystem:
> make login DEV=/dev/comX
SHELL> echo hello shell
SHELL> echo test | write mytest.txt
SHELL> ls
SHELL> read mytest.txt
[CTRL-C] to exit the shell
3. Upload Contiki executable hello-world.ce:
> make upload-executable DEV=/dev/comX
[CTRL-C] to exit the shell when the entire file has been uploaded (after ~30 sec)
4. Verify that hello-world.ce exists in CFS:
> make login DEV=/dev/comX
SHELL> ls
SHELL> read hello-world.ce | size
The last command output should equal the size of hello-world.ce in this
directory!
5. Load and start hello world:
SHELL> exec hello-world.ce
The program should now start: the output 'Hello, World' appears.

1
examples/mb851/telnet-server/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/temperature/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

1
examples/mb851/udp-ipv6-sleep/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

10
examples/mb851/udp-ipv6-sleep/README.md
View file

@ -1,10 +0,0 @@
UDP IPV6 sleep
==============
Thi is an example based on the UDP-IPv6 example. A client periodically sends
UDP packets to a fixed server. The client will also go in a deep sleep state
during which all system peripherals are turned off to save as more energy as
possible.
To avoid blocking the entire OS for too long time, the system periodically
wakes up to let the OS poll processes and dispatch events.

1
examples/mb851/webserver-ajax/Makefile.target
View file

@ -1 +0,0 @@
TARGET = mb851

37
examples/mb851/webserver-ajax/README.md
View file

@ -1,37 +0,0 @@
Compile with WITH_RIME 1 for neighbor discovery and with ENERGEST_CONF_ON for
energy estimation.
Estimated consumption with batteries (2.4 V):
<table>
<tr>
<td></td>
<td>Curr</td>
<td>Power</td>
</tr>
<tr>
<td>ENERGEST_TYPE_CPU</td>
<td>7.5 mA</td>
<td>18 mW</td>
</tr>
<tr>
<td>ENERGEST_TYPE_LPM</td>
<td>3 mA</td>
<td>7.2 mW</td>
</tr>
<tr>
<td>ENERGEST_TYPE_TRANSMIT</td>
<td>21 mA</td>
<td>50.4 mW</td>
</tr>
<tr>
<td>ENERGEST_TYPE_LISTEN</td>
<td>19 mA</td>
<td>45.6 mW</td>
</tr>
</table>

0
examples/mb851/acc-sensor/Makefile → examples/mbxxx/acc-sensor/Makefile
View file

1
examples/mbxxx/acc-sensor/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

3
examples/mb851/acc-sensor/acc-example.c → examples/mbxxx/acc-sensor/acc-example.c
View file

@ -41,6 +41,7 @@
#include "contiki.h"
#include "dev/acc-sensor.h"
#include "board.h"
#include <stdio.h> /* For printf() */
/*---------------------------------------------------------------------------*/
@ -54,7 +55,7 @@ PROCESS_THREAD(acc_process, ev, data)
PROCESS_BEGIN();
printf("Starting measuring acceleration\r\n");
boardPrintStringDescription();
SENSORS_ACTIVATE(acc_sensor);
// Enable High Range.

0
examples/mb851/button/Makefile → examples/mbxxx/button/Makefile
View file

1
examples/mbxxx/button/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

4
examples/mb851/button/test-button.c → examples/mbxxx/button/test-button.c
View file

@ -42,6 +42,8 @@
#include "dev/button-sensor.h"
#include "dev/leds.h"
#include <stdio.h>
#include "board.h"
/*---------------------------------------------------------------------------*/
PROCESS(test_button_process, "Test button");
@ -52,7 +54,7 @@ PROCESS_THREAD(test_button_process, ev, data)
PROCESS_BEGIN();
SENSORS_ACTIVATE(button_sensor);
boardPrintStringDescription();
printf("Press the button to toggle the leds.");
while(1) {

0
examples/mb851/coffee-test/Makefile → examples/mbxxx/coffee-test/Makefile
View file

1
examples/mbxxx/coffee-test/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

2
examples/mb851/coffee-test/coffee-test.c → examples/mbxxx/coffee-test/coffee-test.c
View file

@ -40,6 +40,7 @@
#include "contiki.h"
#include "cfs-coffee-arch.h"
#include "cfs-coffee.h"
#include "board.h"
#include <stdio.h>
@ -51,6 +52,7 @@ PROCESS_THREAD(coffee_test_process, ev, data)
{
PROCESS_BEGIN();
boardPrintStringDescription();
printf("Testing coffee...\n");
cfs_coffee_format();

4
examples/mb851/mb851-shell/Makefile → examples/mbxxx/mbxxx-shell/Makefile
View file

@ -1,6 +1,6 @@
CONTIKI_PROJECT = mb851-shell
CONTIKI_PROJECT = mbxxx-shell
PROJECTDIRS = $(CONTIKI)/platform/mb851/apps
PROJECTDIRS = $(CONTIKI)/platform/mbxxx/apps
APPS = serial-shell

1
examples/mbxxx/mbxxx-shell/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

8
examples/mb851/mb851-shell/mb851-shell.c → examples/mbxxx/mbxxx-shell/mbxxx-shell.c
View file

@ -32,7 +32,7 @@
/**
* \file
* MB851-specific Contiki shell
* mbxxx-specific Contiki shell
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*
@ -44,10 +44,10 @@
#include "shell-sensors.h"
/*---------------------------------------------------------------------------*/
PROCESS(mb851_shell_process, "MB851 Contiki shell");
AUTOSTART_PROCESSES(&mb851_shell_process);
PROCESS(mbxxx_shell_process, "MBXXX Contiki shell");
AUTOSTART_PROCESSES(&mbxxx_shell_process);
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(mb851_shell_process, ev, data)
PROCESS_THREAD(mbxxx_shell_process, ev, data)
{
PROCESS_BEGIN();

2
examples/mb851/mb851-websense/Makefile → examples/mbxxx/mbxxx-websense/Makefile
View file

@ -1,4 +1,4 @@
all: mb851-websense
all: mbxxx-websense
CONTIKI=../../..

1
examples/mbxxx/mbxxx-websense/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

3
examples/mb851/mb851-websense/README.md → examples/mbxxx/mbxxx-websense/README.md
View file

@ -1 +1,4 @@
webserver IPv6
==============
See sky-websense example for more info.

0
examples/mb851/mb851-websense/mb851-websense.c → examples/mbxxx/mbxxx-websense/mbxxx-websense.c
View file

0
examples/mb851/mb851-websense/project-conf.h → examples/mbxxx/mbxxx-websense/project-conf.h
View file

2
examples/mb851/shell-exec/Makefile → examples/mbxxx/shell-exec/Makefile
View file

@ -1,7 +1,7 @@
CONTIKI_PROJECT = shell-exec-test
all: $(CONTIKI_PROJECT)
TARGET=mb851
TARGET=mbxxx
COFFEE=1
ELF_LOADER=1

47
examples/mbxxx/shell-exec/README.md Normal file
View file

@ -0,0 +1,47 @@
ELFloader and shell command 'exec' example for mbxxx (STM32W) platform
======================================================================
Compiles the Contiki hello-world application as a Contiki executable (.ce).
The Contiki executable is then uploaded to the mbxxx platform via serial, and
is stored in the filesystem.
Finally, the executable is loaded via the shell command 'exec'.
NOTE:
You may have to reduce the ELF loader memory usage (/platform/sky/contiki-conf.h).
Since hello-world uses very little memory:
#define ELFLOADER_CONF_DATAMEMORY_SIZE 0x100
#define ELFLOADER_CONF_TEXTMEMORY_SIZE 0x100
1. Upload Sky shell with 'exec' command and symbols (requires several recompilations to generate correct symbols):
> make
> make CORE=shell-exec-test.mbxxx
> make shell-exec-test.flash CORE=shell-exec-test.mbxxx PORT=AUTO
2. Verify access to the shell and the filesystem:
> make login DEV=/dev/comX
SHELL> echo hello shell
SHELL> echo test | write mytest.txt
SHELL> ls
SHELL> read mytest.txt
[CTRL-C] to exit the shell
3. Upload Contiki executable hello-world.ce:
> make upload-executable DEV=/dev/comX
[CTRL-C] to exit the shell when the entire file has been uploaded (after ~30 sec)
4. Verify that hello-world.ce exists in CFS:
> make login DEV=/dev/comX
SHELL> ls
SHELL> read hello-world.ce | size
The last command output should equal the size of hello-world.ce in this directory!
5. Load and start hello world:
SHELL> exec hello-world.ce
The program should now start: the output 'Hello, World' appears.

0
examples/mb851/shell-exec/hello-world.c → examples/mbxxx/shell-exec/hello-world.c
View file

0
examples/mb851/shell-exec/shell-exec-test.c → examples/mbxxx/shell-exec/shell-exec-test.c
View file

2
examples/mb851/telnet-server/Makefile → examples/mbxxx/telnet-server/Makefile
View file

@ -4,7 +4,7 @@ UIP_CONF_IPV6=1
APPS = telnetd
PROJECTDIRS = $(CONTIKI)/platform/mb851/apps
PROJECTDIRS = $(CONTIKI)/platform/mbxxx/apps
PROJECT_SOURCEFILES = shell-sensors.c

1
examples/mbxxx/telnet-server/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

0
examples/mb851/telnet-server/telnet-server.c → examples/mbxxx/telnet-server/telnet-server.c
View file

0
examples/mb851/temperature/Makefile → examples/mbxxx/temperature/Makefile
View file

1
examples/mbxxx/temperature/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

3
examples/mb851/temperature/temp-sensor.c → examples/mbxxx/temperature/temp-sensor.c
View file

@ -42,6 +42,7 @@
#include "contiki.h"
#include "dev/temperature-sensor.h"
#include "board.h"
#include <stdio.h> /* For printf() */
/*---------------------------------------------------------------------------*/
@ -54,6 +55,7 @@ PROCESS_THREAD(temp_process, ev, data)
PROCESS_BEGIN();
boardPrintStringDescription();
printf("Starting measuring temperature\r\n");
while(1) {
@ -63,7 +65,6 @@ PROCESS_THREAD(temp_process, ev, data)
unsigned int temp = temperature_sensor.value(0);
printf("Temp: %d.%d °C \r",temp/10,temp-(temp/10)*10);
}

0
examples/mb851/udp-ipv6-sleep/Makefile → examples/mbxxx/udp-ipv6-sleep/Makefile
View file

1
examples/mbxxx/udp-ipv6-sleep/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

10
examples/mbxxx/udp-ipv6-sleep/README.md Normal file
View file

@ -0,0 +1,10 @@
UDP-IPv6 Client and Server
=========================
This is an example based on the udp-ipv6 example. A client periodically sends
UDP packets to a fixed server. The client will also go in a deep sleep state
during wich all system peripherals are turned off to save as more energy as
possible.
To avoid blocking the entire OS for too long time, the system periocally
wakes up to let the OS poll processes and dispatch events.

5
examples/mb851/udp-ipv6-sleep/udp-client.c → examples/mbxxx/udp-ipv6-sleep/udp-client.c
View file

@ -33,6 +33,7 @@
#include "sleep.h"
#include "board-sensors.h"
#include "board.h"
#include <string.h>
@ -165,9 +166,9 @@ PROCESS_THREAD(udp_client_process, ev, data)
PROCESS_YIELD();
if(etimer_expired(&wake_timer)){ // if timer hasn't expired do not go in deep sleep, in order to receive a response.
printf("Sleeping...\r\n");
sensorsPowerDown();
halBoardPowerDown();//sensorsPowerDown();
sleep_seconds(SLEEP_INTERVAL_SECONDS); // Put system in deep sleep mode for a while.
sensorsPowerUp();
halBoardPowerUp();//sensorsPowerUp();
printf("Awake\r\n");
}
if(etimer_expired(&et)) {

0
examples/mb851/udp-ipv6-sleep/udp-server.c → examples/mbxxx/udp-ipv6-sleep/udp-server.c
View file

2
examples/mb851/webserver-ajax/Makefile → examples/mbxxx/webserver-ajax/Makefile
View file

@ -1,4 +1,4 @@
CONTIKI_PROJECT = mb851-webserver
CONTIKI_PROJECT = mbxxx-webserver
all: $(CONTIKI_PROJECT)
DEFINES=PROJECT_CONF_H=\"webserver-ajax-conf.h\"

1
examples/mbxxx/webserver-ajax/Makefile.target Normal file
View file

@ -0,0 +1 @@
TARGET = mbxxx

12
examples/mbxxx/webserver-ajax/README.md Normal file
View file

@ -0,0 +1,12 @@
webserver ajax
==============
Compile with WITH_RIME 1 for neighbor discovery and with ENERGEST_CONF_ON
for energy estimation.
Estimated consumption with batteries (2.4 V):
Curr Power
ENERGEST_TYPE_CPU: 7.5 mA 18 mW
ENERGEST_TYPE_LPM: 3 mA 7.2 mW
ENERGEST_TYPE_TRANSMIT: 21 mA 50.4 mW
ENERGEST_TYPE_LISTEN: 19 mA 45.6 mW

0
examples/mb851/webserver-ajax/ajax-cgi.c → examples/mbxxx/webserver-ajax/ajax-cgi.c
View file

0
examples/mb851/webserver-ajax/httpd-fs.c → examples/mbxxx/webserver-ajax/httpd-fs.c
View file

0
examples/mb851/webserver-ajax/httpd-fs/404.html → examples/mbxxx/webserver-ajax/httpd-fs/404.html
View file

0
examples/mb851/webserver-ajax/httpd-fs/footer.html → examples/mbxxx/webserver-ajax/httpd-fs/footer.html
View file

0
examples/mb851/webserver-ajax/httpd-fs/header.html → examples/mbxxx/webserver-ajax/httpd-fs/header.html
View file

0
examples/mb851/webserver-ajax/httpd-fs/index.html → examples/mbxxx/webserver-ajax/httpd-fs/index.html
View file

0
examples/mb851/webserver-ajax/httpd-fs/neighbors.shtml → examples/mbxxx/webserver-ajax/httpd-fs/neighbors.shtml
View file

0
examples/mb851/webserver-ajax/httpd-fs/sensordata.shtml → examples/mbxxx/webserver-ajax/httpd-fs/sensordata.shtml
View file

0
examples/mb851/webserver-ajax/httpd-fs/sensors.shtml → examples/mbxxx/webserver-ajax/httpd-fs/sensors.shtml
View file

0
examples/mb851/webserver-ajax/httpd-fs/spin.gif → examples/mbxxx/webserver-ajax/httpd-fs/spin.gif
View file

Side by side Swipe Overlay

Before

Width:  |  Height:  |  Size: 496 B

After

Width:  |  Height:  |  Size: 496 B

0
examples/mb851/webserver-ajax/httpd-fsdata.c → examples/mbxxx/webserver-ajax/httpd-fsdata.c
View file

2
examples/mb851/webserver-ajax/mb851-webserver.c → examples/mbxxx/webserver-ajax/mbxxx-webserver.c
View file

@ -37,7 +37,7 @@
* Adam Dunkels <adam@sics.se>
*/
/*
* salvopitru: example adapted to MB851.
* salvopitru: example adapted to mbxxx.
*/

4
examples/mbxxx/webserver-ajax/symbols.c Normal file
View file

@ -0,0 +1,4 @@
#include "symbols.h"
const int symbols_nelts = 0;
const struct symbols symbols[] = {{0,0}};

3
examples/mbxxx/webserver-ajax/symbols.h Normal file
View file

@ -0,0 +1,3 @@
#include "loader/symbols.h"
extern const struct symbols symbols[1];

0
examples/mb851/webserver-ajax/webserver-ajax-conf.h → examples/mbxxx/webserver-ajax/webserver-ajax-conf.h
View file

21
platform/mb851/Makefile.mb851
View file

@ -1,21 +0,0 @@
ARCH= irq.c sensors.c acc-sensor.c button-sensor.c temperature-sensor.c mems.c
CONTIKI_TARGET_DIRS = . dev
ifndef CONTIKI_TARGET_MAIN
CONTIKI_TARGET_MAIN = contiki-main.c board-mb851.c
endif
ifeq ($(UIP_CONF_IPV6),1)
CFLAGS += -DWITH_UIP6=1
endif
CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(CONTIKI_TARGET_MAIN)
MCU=STM32W108
include $(CONTIKI)/cpu/stm32w108/Makefile.stm32w108
SERIALDUMP = $(CONTIKI)/tools/stm32w/serialdump-linux
ifeq ($(HOST_OS),Windows)
SERIALDUMP = $(CONTIKI)/tools/stm32w/serialdump-windows
endif

93
platform/mb851/apps/shell-sensors.c
View file

@ -1,93 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* Shell function for temp and acc sensors.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#include <string.h>
#include <stdio.h>
#include "contiki.h"
#include "shell.h"
#include "contiki-net.h"
#include "dev/temperature-sensor.h"
#include "dev/acc-sensor.h"
/*---------------------------------------------------------------------------*/
PROCESS(shell_sensors_process, "sensors");
SHELL_COMMAND(sensors_command,
"sensors",
"sensors {temp|acc}: get sensor value", &shell_sensors_process);
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(shell_sensors_process, ev, data)
{
char str_buf[22];
PROCESS_BEGIN();
if(data == NULL) {
shell_output_str(&sensors_command,
"sensors {temp|acc}: a sensor must be specified", "");
PROCESS_EXIT();
}
if(strcmp(data, "temp") == 0) {
unsigned int temp = temperature_sensor.value(0);
snprintf(str_buf, sizeof(str_buf), "%d.%d degC", temp / 10,
temp - (temp / 10) * 10);
shell_output_str(&sensors_command, "Temp: ", str_buf);
} else {
if(strcmp(data, "acc") == 0) {
snprintf(str_buf, sizeof(str_buf), "%d,%d,%d) mg",
acc_sensor.value(ACC_X_AXIS), acc_sensor.value(ACC_Y_AXIS),
acc_sensor.value(ACC_Z_AXIS));
shell_output_str(&sensors_command, "(X,Y,Z): (", str_buf);
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
void
shell_sensors_init(void)
{
SENSORS_ACTIVATE(acc_sensor);
shell_register_command(&sensors_command);
}
/*---------------------------------------------------------------------------*/
/** @} */

52
platform/mb851/apps/shell-sensors.h
View file

@ -1,52 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* Header file for Contik shell sensors command.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#ifndef __SHELL_SENSORS_H__
#define __SHELL_SENSORS_H__
#include "shell.h"
void shell_sensors_init(void);
#endif /* __SHELL_SENSORS_H__ */
/** @} */

174
platform/mb851/board-mb851.c
View file

@ -1,174 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include PLATFORM_HEADER
#include BOARD_HEADER
#include "hal/micro/micro-common.h"
#include "hal/micro/cortexm3/micro-common.h"
#include "dev/button-sensor.h"
#include "dev/temperature-sensor.h"
#include "dev/acc-sensor.h"
#include "dev/leds.h"
/*---------------------------------------------------------------------------*/
static uint8_t sensors_status;
#define BUTTON_STATUS_ACTIVE (1 << 0)
#define TEMP_STATUS_ACTIVE (1 << 1)
#define ACC_STATUS_ACTIVE (1 << 2)
/*---------------------------------------------------------------------------*/
/**
* \brief Init board (currently does nothing)
*/
void
board_init(void)
{
return;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Power down board
*/
void
board_power_down(void)
{
/* Set everything except LEDs to input */
GPIO_PACFGL = (GPIOCFG_IN << PA0_CFG_BIT) |
(GPIOCFG_IN << PA1_CFG_BIT) |
(GPIOCFG_IN << PA2_CFG_BIT) | (GPIOCFG_IN << PA3_CFG_BIT);
GPIO_PACFGH = (GPIOCFG_IN << PA4_CFG_BIT) | /* PTI EN */
(GPIOCFG_IN << PA5_CFG_BIT) | /* PTI_DATA */
(GPIOCFG_IN << PA6_CFG_BIT) | (GPIOCFG_IN << PA7_CFG_BIT);
GPIO_PBCFGL = (GPIOCFG_IN << PB0_CFG_BIT) | (GPIOCFG_IN << PB1_CFG_BIT) |
(GPIOCFG_IN << PB2_CFG_BIT) | /* Uart Tx, RX */
(GPIOCFG_IN << PB3_CFG_BIT);
GPIO_PBCFGH = (GPIOCFG_IN << PB4_CFG_BIT) |
(GPIOCFG_IN << PB5_CFG_BIT) |
(GPIOCFG_IN << PB6_CFG_BIT) | (GPIOCFG_IN << PB7_CFG_BIT);
GPIO_PCCFGL = (GPIOCFG_IN << PC0_CFG_BIT) |
(GPIOCFG_IN << PC1_CFG_BIT) |
(GPIOCFG_IN << PC2_CFG_BIT) | (GPIOCFG_IN << PC3_CFG_BIT);
GPIO_PCCFGH = (GPIOCFG_IN << PC4_CFG_BIT) | (GPIOCFG_IN << PC5_CFG_BIT) |
(GPIOCFG_IN << PC6_CFG_BIT) | (GPIOCFG_IN << PC7_CFG_BIT); /* OSC32K */
leds_init();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Power down sensors
*/
void
board_sensors_power_down(void)
{
/*
* Remember state of sensors (if active or not), in order to
* resume their original state after calling powerUpSensors().
* Useful when entering in sleep mode, since all system
* peripherals have to be reinitialized.
*/
sensors_status = 0;
if(button_sensor.status(SENSORS_READY)) {
sensors_status |= BUTTON_STATUS_ACTIVE;
}
if(temperature_sensor.status(SENSORS_READY)) {
sensors_status |= TEMP_STATUS_ACTIVE;
}
if(acc_sensor.status(SENSORS_READY)) {
sensors_status |= ACC_STATUS_ACTIVE;
/* Power down accelerometer to save power */
SENSORS_DEACTIVATE(acc_sensor);
}
}
/*---------------------------------------------------------------------------*/
/**
* \brief Power up sensors
*/
void
board_sensors_power_up(void)
{
button_sensor.configure(SENSORS_HW_INIT, 0);
temperature_sensor.configure(SENSORS_HW_INIT, 0);
acc_sensor.configure(SENSORS_HW_INIT, 0);
if(sensors_status & BUTTON_STATUS_ACTIVE) {
SENSORS_ACTIVATE(button_sensor);
}
if(sensors_status & TEMP_STATUS_ACTIVE) {
SENSORS_ACTIVATE(temperature_sensor);
}
if(sensors_status & ACC_STATUS_ACTIVE) {
SENSORS_ACTIVATE(acc_sensor);
}
}
/*---------------------------------------------------------------------------*/
/**
* \brief Power up board
*/
void
board_power_up(void)
{
/* Set everything to inputs */
GPIO_PACFGL = (GPIOCFG_IN << PA0_CFG_BIT) |
(GPIOCFG_IN << PA1_CFG_BIT) |
(GPIOCFG_IN << PA2_CFG_BIT) | (GPIOCFG_IN << PA3_CFG_BIT);
GPIO_PACFGH = (GPIOCFG_IN << PA4_CFG_BIT) | /* PTI EN */
(GPIOCFG_IN << PA5_CFG_BIT) | /* PTI_DATA */
(GPIOCFG_IN << PA6_CFG_BIT) | (GPIOCFG_IN << PA7_CFG_BIT);
GPIO_PBCFGL = (GPIOCFG_IN << PB0_CFG_BIT) | (GPIOCFG_OUT_ALT << PB1_CFG_BIT) |
(GPIOCFG_IN << PB2_CFG_BIT) | /* Uart Rx, Tx */
(GPIOCFG_IN << PB3_CFG_BIT);
GPIO_PBCFGH = (GPIOCFG_IN << PB4_CFG_BIT) |
(GPIOCFG_IN << PB5_CFG_BIT) |
(GPIOCFG_IN << PB6_CFG_BIT) | (GPIOCFG_IN << PB7_CFG_BIT);
GPIO_PCCFGL = (GPIOCFG_IN << PC0_CFG_BIT) |
(GPIOCFG_IN << PC1_CFG_BIT) |
(GPIOCFG_IN << PC2_CFG_BIT) | (GPIOCFG_IN << PC3_CFG_BIT);
GPIO_PCCFGH = (GPIOCFG_IN << PC4_CFG_BIT) | (GPIOCFG_IN << PC5_CFG_BIT) |
(GPIOCFG_IN << PC6_CFG_BIT) | (GPIOCFG_IN << PC7_CFG_BIT); /* OSC32K */
}
/*---------------------------------------------------------------------------*/
/* STM32W108 HAL functions needed to get use the
hal/micro/cortexm3/micro.c functionality. */
void halBoardInit(void) { board_init(); }
void halBoardPowerUp(void) { board_power_up(); }
void halBoardPowerDown(void) { board_power_down(); }
/*---------------------------------------------------------------------------*/
/** @} */

172
platform/mb851/contiki-conf.h
View file

@ -1,172 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* contiki-conf.h for MB851.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
* Chi-Anh La <la@imag.fr>
* Simon Duquennoy <simonduq@sics.se>
*/
#ifndef __CONTIKI_CONF_H__
#define __CONTIKI_CONF_H__
#ifdef PLATFORM_CONF_H
#include PLATFORM_CONF_H
#else
#include "platform-conf.h"
#endif /* PLATFORM_CONF_H */
/* Radio and 802.15.4 params */
/* 802.15.4 radio channel */
#define RF_CHANNEL 26
/* 802.15.4 PAN ID */
#define IEEE802154_CONF_PANID 0xabcd
/* Use EID 64, enable hardware autoack and address filtering */
#define RIMEADDR_CONF_SIZE 8
#define UIP_CONF_LL_802154 1
#define ST_CONF_RADIO_AUTOACK 1
/* Number of buffers for incoming frames */
#define RADIO_RXBUFS 2
/* Set to 0 for non ethernet links */
#define UIP_CONF_LLH_LEN 0
/* RDC params */
/* TX routine passes the cca/ack result in the return parameter */
#define RDC_CONF_HARDWARE_ACK 1
/* TX routine does automatic cca and optional backoff */
#define RDC_CONF_HARDWARE_CSMA 0
/* RDC debug with LED */
#define RDC_CONF_DEBUG_LED 0
/* Channel check rate (per second) */
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
/* Use ACK for optimization (LPP, XMAC) */
#define WITH_ACK_OPTIMIZATION 0
/* Netstack config */
#define NETSTACK_CONF_MAC csma_driver
#define NETSTACK_CONF_RDC contikimac_driver
#define NETSTACK_CONF_FRAMER framer_802154
#define NETSTACK_CONF_RADIO stm32w_radio_driver
/* ContikiMAC config */
#define CONTIKIMAC_CONF_COMPOWER 0
#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0
#define CONTIKIMAC_CONF_ANNOUNCEMENTS 0
#define CONTIKIMAC_CONF_WITH_PHASE_OPTIMIZATION 0
/* CXMAC config */
#define CXMAC_CONF_ANNOUNCEMENTS 0
#define CXMAC_CONF_COMPOWER 1
/* XMAC config */
#define XMAC_CONF_ANNOUNCEMENTS 0
#define XMAC_CONF_COMPOWER 1
/* Other (RAM saving) */
#define ENERGEST_CONF_ON 0
#define QUEUEBUF_CONF_NUM 2
#define QUEUEBUF_CONF_REF_NUM 0
#define UIP_CONF_DS6_NBR_NBU 4
#define UIP_CONF_MAX_ROUTES 4
#define RPL_CONF_MAX_PARENTS_PER_DAG 4
#define RPL_CONF_MAX_INSTANCES 1
#define RPL_CONF_MAX_DAG_PER_INSTANCE 1
#define PROCESS_CONF_NUMEVENTS 16
#if WITH_UIP6
/* Network setup for IPv6 */
#define NETSTACK_CONF_NETWORK sicslowpan_driver
/*
* Specify a minimum packet size for 6lowpan compression to be
* enabled. This is needed for ContikiMAC, which needs packets to be
* larger than a specified size, if no ContikiMAC header should
* be used.
*/
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD 63
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER 0
#define UIP_CONF_ROUTER 1
#define UIP_CONF_IPV6_RPL 1
#define UIP_CONF_ND6_SEND_RA 0
#define UIP_CONF_BUFFER_SIZE 140
#define UIP_CONF_IPV6 1
#define UIP_CONF_IPV6_QUEUE_PKT 0
#define UIP_CONF_IPV6_CHECKS 1
#define UIP_CONF_IPV6_REASSEMBLY 0
#define UIP_CONF_ND6_MAX_PREFIXES 2
#define UIP_CONF_ND6_MAX_NEIGHBORS 2
#define UIP_CONF_ND6_MAX_DEFROUTERS 1
#define UIP_CONF_IP_FORWARD 0
#define UIP_CONF_MAX_CONNECTIONS 4
#define UIP_CONF_MAX_LISTENPORTS 8
#define UIP_CONF_UDP_CONNS 4
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
#ifndef SICSLOWPAN_CONF_FRAG
#define SICSLOWPAN_CONF_FRAG 1
#endif /* SICSLOWPAN_CONF_FRAG */
#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
#endif /* SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS */
#ifndef SICSLOWPAN_CONF_MAXAGE
#define SICSLOWPAN_CONF_MAXAGE 2
#endif /* SICSLOWPAN_CONF_MAXAGE */
#else /* WITH_UIP6 */
/* Network setup for non-IPv6 (rime). */
#define NETSTACK_CONF_NETWORK rime_driver
#endif /* WITH_UIP6 */
#ifdef PROJECT_CONF_H
#include PROJECT_CONF_H
#endif /* PROJECT_CONF_H */
#ifdef PLATFORM_CONF
#include PLATFORM_CONF
#endif /* PLATFORM_CONF */
#endif /* __CONTIKI_CONF_H__ */
/** @} */

332
platform/mb851/contiki-main.c
View file

@ -1,332 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* Contiki main file.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
* Chi-Anh La <la@imag.fr>
*/
#include PLATFORM_HEADER
#include "hal/error.h"
#include "hal/hal.h"
#include BOARD_HEADER
#include "micro/adc.h"
#include <stdio.h>
#include "contiki.h"
#include "dev/watchdog.h"
#include "dev/leds.h"
#include "dev/button-sensor.h"
#include "dev/temperature-sensor.h"
#include "dev/acc-sensor.h"
#include "dev/uart1.h"
#include "dev/serial-line.h"
#include "dev/stm32w-radio.h"
#include "net/netstack.h"
#include "net/rime/rimeaddr.h"
#include "net/rime.h"
#include "net/rime/rime-udp.h"
#include "net/uip.h"
#if WITH_UIP6
#include "net/uip-ds6.h"
#endif /* WITH_UIP6 */
#define DEBUG 1
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#define PRINT6ADDR(addr) PRINTF(" %02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x:%02x%02x ", ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
#define PRINTLLADDR(lladdr) PRINTF(" %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",lladdr.u8[0], lladdr.u8[1], lladdr.u8[2], lladdr.u8[3],lladdr.u8[4], lladdr.u8[5], lladdr.u8[6], lladdr.u8[7])
#else
#define PRINTF(...)
#define PRINT6ADDR(addr)
#define PRINTLLADDR(addr)
#endif
#if UIP_CONF_IPV6
PROCINIT(&tcpip_process, &sensors_process);
#else
PROCINIT(&sensors_process);
#warning "No TCP/IP process!"
#endif
SENSORS(&button_sensor, &temperature_sensor, &acc_sensor);
/* The default CCA threshold is set to -77, which is the same as the
default setting on the TI CC2420. */
#define DEFAULT_RADIO_CCA_THRESHOLD (-77)
/*---------------------------------------------------------------------------*/
static void
print_processes(struct process * const processes[])
{
#if !PROCESS_CONF_NO_PROCESS_NAMES
/* const struct process * const * p = processes;*/
printf("Starting");
while(*processes != NULL) {
printf(" '%s'", (*processes)->name);
processes++;
}
printf("\n");
#endif /* !PROCESS_CONF_NO_PROCESS_NAMES */
}
/*---------------------------------------------------------------------------*/
static void
set_rime_addr(void)
{
int i;
union {
uint8_t u8[8];
} eui64;
uint8_t *stm32w_eui64 = ST_RadioGetEui64();
{
uint8_t c;
/* Copy the EUI-64 to lladdr converting from Little-Endian to
Big-Endian. */
for(c = 0; c < 8; c++) {
eui64.u8[c] = stm32w_eui64[7 - c];
}
}
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &eui64, sizeof(uip_lladdr.addr));
#endif
#if UIP_CONF_IPV6
rimeaddr_set_node_addr((rimeaddr_t *) &eui64);
#else
rimeaddr_set_node_addr((rimeaddr_t *) &eui64.u8[8 - RIMEADDR_SIZE]);
#endif
printf("Rime started with address ");
for(i = 0; i < sizeof(rimeaddr_t) - 1; i++) {
printf("%d.", rimeaddr_node_addr.u8[i]);
}
printf("%d\n", rimeaddr_node_addr.u8[i]);
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initalize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
/* LED initialization */
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on MB851\r\n");
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling
layers */
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
ctimer_init();
netstack_init();
set_rime_addr();
printf("%s %s, channel check rate %lu Hz\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()));
printf("802.15.4 PAN ID 0x%x, EUI-%d:",
IEEE802154_CONF_PANID, UIP_CONF_LL_802154 ? 64 : 16);
uip_debug_lladdr_print(&rimeaddr_node_addr);
printf(", radio channel %u\n", RF_CHANNEL);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
/* Set the Clear Channel Assessment (CCA) threshold of the
radio. The CCA threshold is used both for sending packets and for
waking up ContikiMAC nodes. If the CCA threshold is too high,
ContikiMAC will not wake up from neighbor transmissions. If the
CCA threshold is too low, transmissions will be too restrictive
and no packets will be sent. DEFAULT_RADIO_CCA_THRESHOLD is
defined in this file. */
ST_RadioSetEdCcaThreshold(DEFAULT_RADIO_CCA_THRESHOLD);
print_processes(autostart_processes);
autostart_start(autostart_processes);
#if UIP_CONF_IPV6
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#endif /* UIP_CONF_IPV6 */
watchdog_start();
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
/* watchdog_stop(); */
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE, 0);
/* We are awake. */
/* watchdog_start(); */
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/
#if 0
uint8_t errcode __attribute__(( section(".noinit") ));
/*--------------------------------------------------------------------------*/
void
halBaseBandIsr(void)
{
errcode = 1;
leds_on(LEDS_RED);
}
/*--------------------------------------------------------------------------*/
void
BusFault_Handler(void)
{
errcode = 2;
leds_on(LEDS_RED);
}
/*--------------------------------------------------------------------------*/
void
halDebugIsr(void)
{
errcode = 3;
leds_on(LEDS_RED);
}
/*--------------------------------------------------------------------------*/
void
DebugMon_Handler(void)
{
errcode = 4;
/* leds_on(LEDS_RED); */
}
/*--------------------------------------------------------------------------*/
void
HardFault_Handler(void)
{
errcode = 5;
/* leds_on(LEDS_RED); */
/* halReboot(); */
}
/*--------------------------------------------------------------------------*/
void
MemManage_Handler(void)
{
errcode = 6;
/* leds_on(LEDS_RED); */
/* halReboot(); */
}
/*--------------------------------------------------------------------------*/
void
UsageFault_Handler(void)
{
errcode = 7;
/* leds_on(LEDS_RED); */
/* halReboot(); */
}
/*--------------------------------------------------------------------------*/
void
Default_Handler()
{
/* errcode = 8; */
leds_on(LEDS_RED);
halReboot();
}
/*--------------------------------------------------------------------------*/
#endif
/** @} */

137
platform/mb851/dev/acc-sensor.c
View file

@ -1,137 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* Accelerometer driver.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#include "dev/acc-sensor.h"
#include "mems.h"
#include "sys/clock.h"
#define FALSE 0
#define TRUE 1
/*---------------------------------------------------------------------------*/
static int
active(void)
{
uint8_t reg;
if(!i2c_read_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, &reg, 1)) {
return FALSE;
}
return (reg & 0x40) ? TRUE : FALSE;
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
int8_t i2c_data = 0;
uint8_t reg_addr;
switch (type) {
case ACC_X_AXIS:
reg_addr = OUTX_H;
break;
case ACC_Y_AXIS:
reg_addr = OUTY_H;
break;
case ACC_Z_AXIS:
reg_addr = OUTZ_H;
break;
default:
return 0;
}
i2c_read_reg(KLIS3L02DQ_SLAVE_ADDR, reg_addr, (uint8_t *) &i2c_data, 1);
if(mems_get_fullscale() == ACC_HIGH_RANGE) {
return ((int16_t) i2c_data) * HIGH_RANGE_SENSITIVITY;
} else {
return ((int16_t) i2c_data) * LOW_RANGE_SENSITIVITY;
}
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
switch (type) {
case SENSORS_HW_INIT:
return mems_init();
case SENSORS_ACTIVE:
if(value) {
if(mems_on()) {
clock_wait(8);
return 1;
}
return 0;
} else {
return mems_off();
}
case ACC_RANGE:
return mems_set_fullscale((boolean) value);
case ACC_HPF:
if(value < ACC_HPF_DISABLE) {
return i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG2,
(1 << 4) | (uint8_t) value);
} else {
return i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, 0x00);
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch (type) {
case SENSORS_READY:
return active();
}
return 0;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(acc_sensor, ACC_SENSOR, value, configure, status);
/** @} */

77
platform/mb851/dev/acc-sensor.h
View file

@ -1,77 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* Accelerometer header file.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#ifndef __ACC_SENSOR_H__
#define __ACC_SENSOR_H__
#include "lib/sensors.h"
#include "mems.h"
extern const struct sensors_sensor acc_sensor;
#define ACC_SENSOR "Acc"
/* The type values used in the configure() function. */
/* Full-scale */
#define ACC_RANGE 1
#define ACC_LOW_RANGE MEMS_LOW_RANGE
#define ACC_HIGH_RANGE MEMS_HIGH_RANGE
/* High pass filter and cut-off frequencies */
#define ACC_HPF 2
#define ACC_HPF_DISABLE 4
#define ACC_1HZ 3
#define ACC_2HZ 2
#define ACC_4HZ 1
#define ACC_8HZ 0
/*
* The type values used in the value() function.
* The returned value is expressed in mg units and can be negative.
*/
#define ACC_X_AXIS 1
#define ACC_Y_AXIS 2
#define ACC_Z_AXIS 3
#endif /* __ACC_SENSOR_H__ */
/** @} */

186
platform/mb851/dev/button-sensor.c
View file

@ -1,186 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* Button sensor.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#include "dev/button-sensor.h"
#include "hal/micro/micro-common.h"
#include "hal/micro/cortexm3/micro-common.h"
#include BOARD_HEADER
#define DEBOUNCE 1
/**
* \brief Port and pin for BUTTON0.
*/
#undef BUTTON_S1
#define BUTTON_S1 PORTA_PIN(7)
#define BUTTON_S1_INPUT_GPIO BUTTON_INPUT_GPIO(PORTA)
#define BUTTON_S1_GPIO_PIN 7
#define BUTTON_S1_OUTPUT_GPIO GPIO_PAOUT
/**
* \brief Point the proper IRQ at the desired pin for BUTTON0.
*/
#define BUTTON_S1_SEL() do { GPIO_IRQCSEL = BUTTON_S1; } while(0)
/**
* \brief The interrupt service routine for BUTTON_S1.
*/
#define BUTTON_S1_ISR halIrqCIsr
/**
* \brief The interrupt configuration register for BUTTON_S1.
*/
#define BUTTON_S1_INTCFG GPIO_INTCFGC
/**
* \brief The interrupt bit for BUTTON_S1.
*/
#define BUTTON_S1_INT_EN_BIT INT_IRQC
/**
* \brief The interrupt bit for BUTTON_S1.
*/
#define BUTTON_S1_FLAG_BIT INT_IRQCFLAG
/**
* \brief The missed interrupt bit for BUTTON_S1.
*/
#define BUTTON_S1_MISS_BIT INT_MISSIRQC
#if DEBOUNCE
static struct timer debouncetimer;
#endif
#define FALSE 0
#define TRUE 1
/*---------------------------------------------------------------------------*/
static void
init(void)
{
#if DEBOUNCE
timer_set(&debouncetimer, 0);
#endif
/* Configure GPIO */
/* Input, pulled up or down (selected by GPIO_PxOUT: 0 = pull-down). */
halGpioConfig(BUTTON_S1, GPIOCFG_IN_PUD);
BUTTON_S1_OUTPUT_GPIO |= GPIOOUT_PULLUP << BUTTON_S1_GPIO_PIN;
BUTTON_S1_SEL();
BUTTON_S1_INTCFG = 0x40; /* Falling edge triggered. */
}
/*---------------------------------------------------------------------------*/
static void
activate(void)
{
INT_CFGSET = BUTTON_S1_INT_EN_BIT;
}
/*---------------------------------------------------------------------------*/
static void
deactivate(void)
{
INT_CFGCLR = BUTTON_S1_INT_EN_BIT;
}
/*---------------------------------------------------------------------------*/
static int
active(void)
{
return (INT_CFGSET & BUTTON_S1_INT_EN_BIT) ? TRUE : FALSE;
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
#if DEBOUNCE
return (BUTTON_S1_INPUT_GPIO & (1 << BUTTON_S1_GPIO_PIN)) ||
!timer_expired(&debouncetimer);
#else
return BUTTON_S1_INPUT_GPIO & (1 << BUTTON_S1_GPIO_PIN);
#endif
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
switch (type) {
case SENSORS_HW_INIT:
init();
return 1;
case SENSORS_ACTIVE:
if(value) {
activate();
} else {
deactivate();
}
return 1;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch (type) {
case SENSORS_READY:
return active();
}
return 0;
}
/*---------------------------------------------------------------------------*/
void
BUTTON_S1_ISR(void)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
/* sensors_handle_irq(IRQ_BUTTON); */
if(INT_GPIOFLAG & BUTTON_S1_FLAG_BIT) {
#if DEBOUNCE
if(timer_expired(&debouncetimer)) {
timer_set(&debouncetimer, CLOCK_SECOND / 5);
sensors_changed(&button_sensor);
}
#else
sensors_changed(&button_sensor);
#endif
}
INT_GPIOFLAG = BUTTON_S1_FLAG_BIT;
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(button_sensor, BUTTON_SENSOR, value, configure, status);
/** @} */

123
platform/mb851/dev/mems-regs.h
View file

@ -1,123 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : mems-regs.h
* Author : MCD Application Team
* Version : V1.0
* Date : January 2010
* Description : stm32w108 mems registers
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
#ifndef _MEMS_REGS_H_
#define _MEMS_REGS_H_
#include <stdint.h>
/* Size of MEMs data */
#define MEMS_DATA_SIZE 6
/* address of slave */
#define KLIS3L02DQ_SLAVE_ADDR 0x38
/* accelerometer register addresses */
#define OFFSET_X 0x16
#define OFFSET_Y 0x17
#define OFFSET_Z 0x18
#define GAIN_X 0x19
#define GAIN_Y 0x1A
#define GAIN_Z 0x1B
#define CTRL_REG1 0x20
#define CTRL_REG2 0x21
#define STATUS_REG 0x27
#define OUTX_L 0x28
#define OUTX_H 0x29
#define OUTY_L 0x2A
#define OUTY_H 0x2B
#define OUTZ_L 0x2C
#define OUTZ_H 0x2D
#define FF_WU_CFG 0x30
#define FF_WU_SRC 0x31
#define FF_WU_ACK 0x32
#define FF_WU_THS_L 0x34
#define FF_WU_THS_H 0x35
#define FF_WU_DURATION 0x36
#define DD_CFG 0x38
#define DD_SRC 0x39
#define DD_ACK 0x3A
#define DD_THSI_L 0x3C
#define DD_THSI_H 0x3D
#define DD_THSE_L 0x3E
#define DD_THSE_H 0x3F
/* Communication control settings */
/* I2C */
#define REPETIR 0x80
/* SPI */
#define MEMS_SPI_WRITE 0x00
#define MEMS_SPI_READ 0x80
#define MEMS_SPI_MULTIPLE_BYTES 0x40
/*--------------------------------------------------------------------------*/
/* Settings for CTRL_REG1 */
/* Power Down Control (PD) */
#define LIS_PD_OFF 0x00
#define LIS_PD_ON 0x40
/* Decimation Factor Control (DF) */
#define LIS_DF_BY128 0x00
#define LIS_DF_BY64 0x10
#define LIS_DF_BY32 0x20
#define LIS_DF_BY8 0x30
/* Self Test */
#define LIS_ST_NORMAL 0x00
#define LIS_ST_TEST 0x08
/* Enable Axis */
#define LIS_EA_ALL 0x07
/*--------------------------------------------------------------------------*/
/* Settings for CTRL_REG2 */
/* Full Scale (FS) */
#define LIS_FS_2G 0x00
#define LIS_FS_6G 0x80
/* Block Data Update (BDU) */
#define LIS_BDU_CONTINUOUS 0x00
#define LIS_BDU_WAIT 0x40
/* Big/Little Endian Selection (BLE) */
#define LIS_BLE_LE 0x00
#define LIS_BLE_BE 0x20
#define LIS_BLE_XX LIS_BLE_BE
/* Data Alignment Selection DAS */
#define LIS_DAS_12BIT 0x00
#define LIS_DAS_16BIT 0x01
/* Interrupt Enable */
#define LIS_INTR_DISABLE 0x00
#define LIS_INTR_ENABLE 0x08
/* Data Ready Enable */
#define LIS_DRDY_DISABLE 0x00
#define LIS_DRDY_ENABLE 0x04
/*--------------------------------------------------------------------------*/
uint8_t i2c_write_reg(uint8_t slave_addr, uint8_t reg_addr,
uint8_t reg_value);
uint8_t i2c_read_reg(uint8_t slave_addr, uint8_t reg_addr, uint8_t *p_buf,
uint8_t len);
/*--------------------------------------------------------------------------*/
#endif /* _MEMS_REGS_H_ */
/** @} */

348
platform/mb851/dev/mems.c
View file

@ -1,348 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : hal_led.c
* Author : MCD Application Team
* Version : V1.0
* Date : September 2009
* Description : Driver for leds management on STM32W108 MB851 board
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
#include PLATFORM_HEADER
#include "mems.h"
#include "timer.h"
/*--------------------------------------------------------------------------*/
#define TIMEOUT 20000
#define SUCCESS 1
#define FAIL 0
#define SEND_BYTE(data) do { SC2_DATA=(data); SC2_TWICTRL1 |= SC_TWISEND; \
} while(0)
#define WAIT_CMD_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWICMDFIN)!=SC_TWICMDFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
#define WAIT_TX_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWITXFIN)!=SC_TWITXFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
#define WAIT_RX_FIN() { \
struct timer t; \
timer_set(&t, CLOCK_SECOND/100); \
while((SC2_TWISTAT&SC_TWIRXFIN)!=SC_TWIRXFIN){ \
if(timer_expired(&t)){ \
return FAIL; \
} \
} \
}
/*--------------------------------------------------------------------------*/
static boolean fullscale_state;
static uint8_t i2c_mems_init(void);
static uint8_t i2c_send_frame(uint8_t address, uint8_t *p_buf, uint8_t len);
uint8_t i2c_write_reg(uint8_t slave_addr, uint8_t reg_addr,
uint8_t reg_value);
/* static uint8_t i2c_mems_read (mems_data_t *mems_data); */
/*--------------------------------------------------------------------------*/
/**
* \brief Init MEMS
* \return None
*/
uint8_t
mems_init(void)
{
uint8_t ret = 0;
/* GPIO assignments */
/* PA1: SC2SDA (Serial Data) */
/* PA2: SC2SCL (Serial Clock) */
/* -----SC2 I2C Master GPIO configuration */
TIM2_CCER &= 0xFFFFEEEE;
SC2_MODE = SC2_MODE_I2C;
GPIO_PACFGL &= 0xFFFFF00F;
GPIO_PACFGL |= 0x00000DD0;
SC2_RATELIN = 14; /* generates standard 100kbps or 400kbps */
SC2_RATEEXP = 1; /* 3 yields 100kbps; 1 yields 400kbps */
SC2_TWICTRL1 = 0; /* start from a clean state */
SC2_TWICTRL2 = 0; /* start from a clean state */
ret = i2c_mems_init();
fullscale_state = MEMS_LOW_RANGE;
/* Add later if really needed */
#ifdef ST_DBG
if(!ret)
I2C_DeInit(MEMS_I2C);
#endif
return ret;
}
/*--------------------------------------------------------------------------*/
/**
* \brief Returns the 3 mems acceleration values related to x,y,z axes
* \param mems_data pointer to mems_data_t that will be filled with the values
* \return None
*/
#if 0
uint8_t mems_get_value(mems_data_t *mems_data)
{
uint8_t i;
i = i2c_mems_read(mems_data);
return i;
}
#endif
/*--------------------------------------------------------------------------*/
/**
* \brief Send I2C frame
* \param address destination device address
* \param p_buf pointer to data buffer
* \param len length of data
* \retval 0 frame has not been successfully sent
* \retval 1 frame has been successfully sent
*/
static uint8_t
i2c_send_frame(uint8_t address, uint8_t *p_buf, uint8_t len)
{
uint8_t i, data;
SC2_TWICTRL1 |= SC_TWISTART; /* send start */
WAIT_CMD_FIN();
SEND_BYTE(address); /* send the address low byte */
WAIT_TX_FIN();
for(i = 0; i < len; i++) {
halInternalResetWatchDog();
data = *(p_buf + i);
SEND_BYTE(data);
WAIT_TX_FIN();
}
SC2_TWICTRL1 |= SC_TWISTOP;
WAIT_CMD_FIN();
return SUCCESS;
}
/*--------------------------------------------------------------------------*/
/**
* \brief Receive I2C frame
* \param address slave device address
* \param p_buf pointer to data buffer
* \param len length of data
* \retval 0 frame has not been successfully received
* \retval 1 frame has been successfully received
*/
static uint8_t
i2c_receive_frame(uint8_t slave_addr, uint8_t reg_addr, uint8_t *p_buf,
uint8_t len)
{
uint8_t i, addr = reg_addr;
if(len > 1) {
addr += REPETIR;
}
SC2_TWICTRL1 |= SC_TWISTART; /* send start */
WAIT_CMD_FIN();
SEND_BYTE(slave_addr | 0x00); /* send the address low byte */
WAIT_TX_FIN();
SEND_BYTE(addr);
WAIT_TX_FIN();
SC2_TWICTRL1 |= SC_TWISTART; /* send start */
WAIT_CMD_FIN();
SEND_BYTE(slave_addr | 0x01); /* send the address low byte */
WAIT_TX_FIN();
for(i = 0; i < len; i++) {
halInternalResetWatchDog();
if(i < (len - 1)) {
SC2_TWICTRL2 |= SC_TWIACK; /* ack on receipt of data */
} else {
SC2_TWICTRL2 &= ~SC_TWIACK; /* don't ack if last one */
}
SC2_TWICTRL1 |= SC_TWIRECV; /* set to receive */
WAIT_RX_FIN();
*(p_buf + i) = SC2_DATA; /* receive data */
}
SC2_TWICTRL1 |= SC_TWISTOP; /* send STOP */
WAIT_CMD_FIN();
return SUCCESS;
}
/*--------------------------------------------------------------------------*/
/**
* \brief write a register on the I2C target
* \param slave_addr slave device address
* \param reg_addr address of the register to be written
* \param reg_value value of the register to be written
* \retval 0 register has not been successfully written
* \retval 1 register has been successfully written
*/
uint8_t
i2c_write_reg(uint8_t slave_addr, uint8_t reg_addr, uint8_t reg_value)
{
uint8_t i2c_buffer[2];
i2c_buffer[0] = reg_addr;
i2c_buffer[1] = reg_value;
return i2c_send_frame(slave_addr, i2c_buffer, 2);
}
/*--------------------------------------------------------------------------*/
/**
* \brief read a register from the I2C target
* \param slave_addr slave device address
* \param reg_addr address of the register
* \param p_buf storage destination for the read data
* \retval 0 register has not been successfully read
* \retval 1 register has been successfully read
*/
uint8_t
i2c_read_reg(uint8_t slave_addr, uint8_t reg_addr, uint8_t *p_buf,
uint8_t len)
{
return i2c_receive_frame(slave_addr, reg_addr, p_buf, len);
}
/*--------------------------------------------------------------------------*/
/**
* \brief Init MEMS
* \return None
* \retval 0 the device has not been successfully initialized
* \retval 1 the device has been successfully initialized
*/
static uint8_t
i2c_mems_init(void)
{
uint8_t i = 0;
i += i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, STATUS_REG, 0x00); /* no flag */
i += i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, FF_WU_CFG, 0x00); /* all off */
i += i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, DD_CFG, 0x00); /* all off */
/* i += i2c_write_reg (KLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, (1<<4) | (1<<1) | (1 << 0)); */
i += i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG2, 0x00);
/* i += i2c_write_reg (KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7); */
i += i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
if(i != 5) {
return 0;
}
return 1;
}
/*--------------------------------------------------------------------------*/
/**
* \brief turn on the MEMS device
* \retval 0 the device has not been successfully set to normal mode
* \retval 1 the device has been successfully set to normal mode
*/
uint8_t
mems_on(void)
{
return i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0xC7);
}
/*--------------------------------------------------------------------------*/
/**
* \brief turn off the MEMS device
* \retval 0 the device has not been successfully turned off
* \retval 1 the device has been successfully turned off
*/
uint8_t
mems_off(void)
{
return i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, 0x87);
}
/*--------------------------------------------------------------------------*/
/**
* \brief set full-scale range of the device
* \param range HIGH for high scale selection, LOW for low range.
* \retval 0 the device has not been successfully set to full scale mode
* \retval 1 the device has been successfully set to full scale mode
*/
uint8_t
mems_set_fullscale(boolean range)
{
uint8_t i2c_buffer;
if (!i2c_read_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, &i2c_buffer, 1)) {
return 0;
}
if(range == MEMS_HIGH_RANGE) {
i2c_buffer |= 0x20;
} else {
i2c_buffer &= ~0x20;
}
if (!i2c_write_reg(KLIS3L02DQ_SLAVE_ADDR, CTRL_REG1, i2c_buffer)) {
return 0;
}
fullscale_state = range;
return 1;
}
/*--------------------------------------------------------------------------*/
/**
* \brief Get full-scale range of the device
* \retval HIGH high scale selection
* \retval LOW low range
*/
boolean
mems_get_fullscale(void)
{
return fullscale_state;
}
/*--------------------------------------------------------------------------*/
/**
* \brief Returns the 3 mems acceleration values related to x,y,z axes
* \param mems_data pointer to mems_data_t that will be filled with the values
* \retval 0 acceleration data has not been successfully read
* \retval 1 acceleration data has been successfully read
*/
#if 0
static uint8_t
i2c_mems_read(mems_data_t *mems_data)
{
uint8_t i, i2c_buffer[8];
i = i2c_read_reg (KLIS3L02DQ_SLAVE_ADDR, OUTX_L, i2c_buffer, 8);
mems_data->outx_h = i2c_buffer[0];
mems_data->outx_l = i2c_buffer[1];
mems_data->outy_h = i2c_buffer[2];
mems_data->outy_l = i2c_buffer[3];
mems_data->outz_h = i2c_buffer[4];
mems_data->outz_l = i2c_buffer[5];
return i;
}
#endif
/*--------------------------------------------------------------------------*/
/** @} */

61
platform/mb851/dev/mems.h
View file

@ -1,61 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : mems.h
* Author : MCD Application Team
* Version : V1.0
* Date : January 2010
* Description : header file for mems driver
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
#ifndef _MEMS_H_
#define _MEMS_H_
#include "mems-regs.h"
#include <stdint.h>
/* Sensitivity values in mg/digit */
#define HIGH_RANGE_SENSITIVITY 72
#define LOW_RANGE_SENSITIVITY 18
#define MEMS_LOW_RANGE 0
#define MEMS_HIGH_RANGE 1
/*
* Mems data type: three acceleration values each related to a specific
* direction.
* Watch out: only lower data values (e.g. those terminated by the _l) are
* currently used by the device.
*/
typedef struct mems_data_s {
int8_t outx_l;
int8_t outx_h;
int8_t outy_l;
int8_t outy_h;
int8_t outz_l;
int8_t outz_h;
} mems_data_t;
uint8_t mems_init(void);
uint8_t mems_on(void);
uint8_t mems_off(void);
uint8_t mems_set_fullscale(boolean range);
boolean mems_get_fullscale(void);
uint8_t mems_get_value(mems_data_t * mems_data);
#endif /* _MEMS_H_ */
/** @} */

66
platform/mb851/dev/temperature-sensor.h
View file

@ -1,66 +0,0 @@
/**
* \addtogroup mb851-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* Temperature sensor.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
*/
#ifndef __TEMPERATURE_SENSOR_H__
#define __TEMPERATURE_SENSOR_H__
#include "lib/sensors.h"
/*
* Value returned by temperature_sensor.value() is expressed in units of 0.1 degC.
*
* NOTES:
*
* For the temperature measurement, the ADC extended range mode is needed;
* but this is inaccurate due to the high voltage mode bug of the general purpose ADC
* (see STM32W108 errata).
*
* For the temperature measurement, the ADC extended range mode is needed;
* but this is inaccurate due to the high voltage mode bug of the general purpose ADC
* (see STM32W108 errata).
*/
extern const struct sensors_sensor temperature_sensor;
#define TEMPERATURE_SENSOR "Temperature"
#endif /* __TEMPERATURE_SENSOR_H__ */
/** @} */

96
platform/mb851/platform-conf.h
View file

@ -1,96 +0,0 @@
/**
* \defgroup mb851-platform The STM32W MB851 platform.
*
* The STM32W MB851 platform.
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/**
* \file
* platform-conf.h for MB851.
* \author
* Salvatore Pitrulli <salvopitru@users.sourceforge.net>
* Chi-Anh La <la@imag.fr>
* Simon Duquennoy <simonduq@sics.se>
*/
#ifndef __PLATFORM_CONF_H__
#define __PLATFORM_CONF_H__
#include PLATFORM_HEADER
#include <inttypes.h>
#include <string.h> /* For memcpm() */
/* Platform-dependent definitions */
#define CC_CONF_REGISTER_ARGS 0
#define CC_CONF_FUNCTION_POINTER_ARGS 1
#define CC_CONF_FASTCALL
#define CC_CONF_VA_ARGS 1
#define CC_CONF_INLINE inline
#define CCIF
#define CLIF
typedef unsigned short uip_stats_t;
typedef unsigned long clock_time_t;
typedef unsigned long rtimer_clock_t;
#define CLOCK_CONF_SECOND 1000
#define RTIMER_CLOCK_LT(a,b) ((signed short)((a)-(b)) < 0)
/* rtimer_second = 11719 */
#define RT_CONF_RESOLUTION 2
#define UART1_CONF_TX_WITH_INTERRUPT 0
#define WITH_SERIAL_LINE_INPUT 1
/* A trick to resolve a compilation error with IAR. */
#ifdef __ICCARM__
#define UIP_CONF_DS6_AADDR_NBU 1
#endif /* __ICCARM__ */
/* LEDs ports MB851 */
#define LEDS_CONF_RED_PIN 0
#define LEDS_CONF_GREEN_PIN 5
#define LEDS_CONF_PORT PORTA
#define LEDS_CONF_RED (1<<LEDS_CONF_RED_PIN)
#define LEDS_CONF_GREEN (1<<LEDS_CONF_GREEN_PIN)
#define UIP_ARCH_ADD32 1
#define UIP_ARCH_CHKSUM 0
#define UIP_CONF_BYTE_ORDER UIP_LITTLE_ENDIAN
#endif /* __PLATFORM_CONF_H__ */
/** @} */

8
platform/mbxxx/Makefile.mbxxx
View file

@ -1,13 +1,12 @@
ARCH= irq.c sensors.c acc-sensor.c button-sensor.c temperature-sensor.c mems.c contact-sensor.c
ARCH= irq.c sensors.c acc-sensor.c button-sensor.c temperature-sensor.c mems.c
CONTIKI_TARGET_DIRS = . dev
ifndef CONTIKI_TARGET_MAIN
CONTIKI_TARGET_MAIN = contiki-main.c led.c button.c board.c board-mbxxx.c
CONTIKI_TARGET_MAIN = contiki-main.c board.c
endif
ifeq ($(UIP_CONF_IPV6),1)
ifdef UIP_CONF_IPV6
CFLAGS += -DWITH_UIP6=1
endif
@ -21,4 +20,3 @@ SERIALDUMP = $(CONTIKI)/tools/stm32w/serialdump-linux
ifeq ($(HOST_OS),Windows)
SERIALDUMP = $(CONTIKI)/tools/stm32w/serialdump-windows
endif

6
platform/mbxxx/apps/shell-sensors.c
View file

@ -1,3 +1,8 @@
/**
* \addtogroup mbxxx-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
@ -94,3 +99,4 @@ shell_sensors_init(void)
shell_register_command(&sensors_command);
}
/*---------------------------------------------------------------------------*/
/** @} */

6
platform/mbxxx/apps/shell-sensors.h
View file

@ -1,3 +1,8 @@
/**
* \addtogroup mbxxx-platform
*
* @{
*/
/*
* Copyright (c) 2010, STMicroelectronics.
* All rights reserved.
@ -45,3 +50,4 @@
void shell_sensors_init(void);
#endif /* __SHELL_SENSORS_H__ */
/** @} */

Some files were not shown because too many files have changed in this diff Show more