initial upload

examples/osd/arduino-bodenheizung/arduino-bodenheizung.geany

@@ -0,0 +1,53 @@
+[file_prefs]
+final_new_line=true
+ensure_convert_new_lines=false
+strip_trailing_spaces=false
+replace_tabs=false
+
+[indentation]
+indent_width=4
+indent_type=1
+indent_hard_tab_width=8
+detect_indent=false
+detect_indent_width=false
+indent_mode=2
+
+[project]
+name=arduino-bodenheizung
+base_path=/home/harald/install/osd-contiki/examples/osd/arduino-bodenheizung/
+description=
+file_patterns=
+
+[long line marker]
+long_line_behaviour=1
+long_line_column=72
+
+[files]
+current_page=0
+FILE_NAME_0=1339;C++;0;EUTF-8;1;1;0;%2Fhome%2Fharald%2Finstall%2Fosd-contiki%2Fexamples%2Fosd%2Farduino-bodenheizung%2Fsketch.pde;0;4
+
+[VTE]
+last_dir=/home/harald
+
+[build-menu]
+NF_00_LB=_Make
+NF_00_CM=make TARGET=osd-merkur-256
+NF_00_WD=
+NF_01_LB=Make flash
+NF_01_CM=make TARGET=osd-merkur-256 flash
+NF_01_WD=
+NF_03_LB=Make Clean
+NF_03_CM=make clean TARGET=osd-merkur-256
+NF_03_WD=
+C++FT_00_LB=_Kompilieren
+C++FT_00_CM=make TARGET=osd-merkur-256
+C++FT_00_WD=
+C++FT_01_LB=_Erstellen
+C++FT_01_CM=make TARGET=osd-merkur-256 flash
+C++FT_01_WD=
+filetypes=C++;
+
+[editor]
+line_wrapping=false
+line_break_column=72
+auto_continue_multiline=true

examples/osd/arduino-bodenheizung/resources/res-dtemp3.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp3,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[2].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}

examples/osd/arduino-bodenheizung/resources/res-dtemp4.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp4,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[3].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}

examples/osd/arduino-bodenheizung/resources/res-dtemp5.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp5,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[4].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}

examples/osd/arduino-bodenheizung/resources/res-dtemp6.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp6,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[5].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}

examples/osd/arduino-bodenheizung/resources/res-dtemp7.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp7,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[6].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}

examples/osd/arduino-bodenheizung/resources/res-dtemp8.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Moisture resource
+ * \author
+ *      Harald Pichler <harald@the-develop.net>
+ */
+
+#include "contiki.h"
+
+#include <string.h>
+#include "rest-engine.h"
+#include "Arduino.h"
+#include "sketch.h"
+
+static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
+
+/* A simple getter example. Returns the reading from the sensor with a simple etag */
+RESOURCE(res_dtemp8,
+         "title=\"Temperature status\";rt=\"Temperature\"",
+         res_get_handler,
+         NULL,
+         NULL,
+         NULL);
+
+static void
+res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  
+  unsigned int accept = -1;
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", ds1820[7].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'temperature':%s}", ds1820[1].stemp);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    const char *msg = "Supporting content-types text/plain and application/json";
+    REST.set_response_payload(response, msg, strlen(msg));
+  }
+}