deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Platform cc2530dk now uses models.h to configure differences between the SmartRF and the 2531 USB stick

Browse source
This commit is contained in:
George Oikonomou 2011-12-22 19:12:34 +00:00 committed by George Oikonomou
parent febcf0fc41
commit 5662b1f37d
3 changed files with 101 additions and 47 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

17
platform/cc2530dk/contiki-conf.h
View file

@ -10,6 +10,8 @@
#include "project-conf.h"
#endif /* PROJECT_CONF_H */
#include "models.h"
/*
* Define this as 1 to poll the etimer process from within main instead of from
* the clock ISR. This reduces the ISR's stack usage and may prevent crashes.
@ -113,21 +115,6 @@
#define LPM_CONF_MODE 0 /* 0: no LPM, 1: MCU IDLE, 2: Drop to PM1 */
#endif
/* Some files include leds.h before us */
#undef LEDS_GREEN
#undef LEDS_YELLOW
#undef LEDS_RED
#define LEDS_YELLOW 4
#if MODEL_CC2531
#undef LEDS_CONF_ALL
#define LEDS_CONF_ALL 3
#define LEDS_RED 1
#define LEDS_GREEN 2
#else
#define LEDS_GREEN 1
#define LEDS_RED 2
#endif
/* DMA Configuration */
#ifndef DMA_CONF_ON
#define DMA_CONF_ON 0

32
platform/cc2530dk/dev/leds-arch.c
View file

@ -40,38 +40,6 @@
#include "dev/leds.h"
#include "dev/leds-arch.h"
#include "cc253x.h"
/*
* Smart RF LEDs
* 1: P1_0 (Green)
* 2: P1_1 (Red)
* 3: P1_4 (Yellow)
* 4: P0_1 (LED4 shares port/pin with B1 and is currently unused)
*
* USB Dongle LEDs
* 1: P0_0 (Red)
* 2: P1_1 (Green - active: low)
*/
#if MODEL_CC2531
#define LED2_PIN P0_0
#define LED1_PIN P1_1
/* P0DIR and P0SEL masks */
#define LED2_MASK 0x01
#define LED1_MASK 0x02
#else
/* H/W Connections */
#define LED1_PIN P1_0
#define LED2_PIN P1_1
#define LED3_PIN P1_4
/* P0DIR and P0SEL masks */
#define LED1_MASK 0x01
#define LED2_MASK 0x02
#define LED3_MASK 0x10
#define LED4_MASK 0x02
#endif
/*---------------------------------------------------------------------------*/
void
leds_arch_init(void)

99
platform/cc2530dk/models.h Normal file
View file

@ -0,0 +1,99 @@
/*
* Copyright (c) 2011, George Oikonomou - <oikonomou@users.sourceforge.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Header file use to configure differences between cc2530dk builds for
* the SmartRF/cc2530 and the cc2531 USB stick.
*
* These configuration directives are hardware-specific and you
* normally won't have to modify them.
*
* \author
* George Oikonomou - <oikonomou@users.sourceforge.net>
*/
#ifndef __MODELS_H__
#define __MODELS_H__
/*---------------------------------------------------------------------------*/
/* LEDs */
/*---------------------------------------------------------------------------*/
/* Some files include leds.h before us */
#undef LEDS_GREEN
#undef LEDS_YELLOW
#undef LEDS_RED
#define LEDS_YELLOW 4
/*
* Smart RF LEDs
* 1: P1_0 (Green)
* 2: P1_1 (Red)
* 3: P1_4 (Yellow)
* 4: P0_1 (LED4 shares port/pin with B1 and is currently unused)
*
* USB Dongle LEDs
* 1: P0_0 (Red)
* 2: P1_1 (Green - active: low)
*/
#if MODEL_CC2531
#undef LEDS_CONF_ALL
#define LEDS_CONF_ALL 3
#define LEDS_RED 1
#define LEDS_GREEN 2
/* H/W Connections */
#define LED2_PIN P0_0
#define LED1_PIN P1_1
/* P0DIR and P0SEL masks */
#define LED2_MASK 0x01
#define LED1_MASK 0x02
#else
#define LEDS_GREEN 1
#define LEDS_RED 2
/* H/W Connections */
#define LED1_PIN P1_0
#define LED2_PIN P1_1
#define LED3_PIN P1_4
/* P0DIR and P0SEL masks */
#define LED1_MASK 0x01
#define LED2_MASK 0x02
#define LED3_MASK 0x10
#define LED4_MASK 0x02
#endif
/*---------------------------------------------------------------------------*/
/* Buttons */
/*---------------------------------------------------------------------------*/
#endif /* __MODELS_H__ */