Merge branch 'contiki' into osd

.gitignore

@@ -24,6 +24,7 @@
 *.c128
 *.c64
 *.cc2538dk
+*.srf06-cc26xx
 *.ev-aducrf101mkxz
 *.report
 summary

.travis.yml

@@ -48,6 +48,13 @@ before_script:
       arm-none-eabi-gcc --version ;
     fi
 
+  ## Download and extract cc26xxware
+  - if [ ${BUILD_ARCH:-0} = arm ] ; then
+      wget http://www.ti.com/lit/sw/swrc296/swrc296.zip &&
+      unzip swrc296.zip &&
+      export TI_CC26XXWARE=cc26xxware_2_20_06_14829 ;
+    fi
+
   ## Install RL78 GCC toolchain
   - sudo apt-get install libncurses5:i386 zlib1g:i386
   - $WGET http://adamdunkels.github.io/contiki-fork/gnurl78-v13.02-elf_1-2_i386.deb &&

apps/er-coap/Makefile.er-coap

@@ -1,4 +1,6 @@
-er-coap_src = er-coap.c er-coap-engine.c er-coap-transactions.c er-coap-observe.c er-coap-separate.c er-coap-res-well-known-core.c er-coap-block1.c
+er-coap_src = er-coap.c er-coap-engine.c er-coap-transactions.c      \
+  er-coap-observe.c er-coap-separate.c er-coap-res-well-known-core.c \
+  er-coap-block1.c er-coap-observe-client.c
 
 # Erbium will implement the REST Engine
 CFLAGS += -DREST=coap_rest_implementation

apps/er-coap/er-coap-engine.c

@@ -253,6 +253,16 @@ coap_receive(void)
         }
         /* if(ACKed transaction) */
         transaction = NULL;
+
+#if COAP_OBSERVE_CLIENT
+	/* if observe notification */
+        if((message->type == COAP_TYPE_CON || message->type == COAP_TYPE_NON)
+              && IS_OPTION(message, COAP_OPTION_OBSERVE)) {
+          PRINTF("Observe [%u]\n", message->observe);
+          coap_handle_notification(&UIP_IP_BUF->srcipaddr, UIP_UDP_BUF->srcport,
+              message);
+        }
+#endif /* COAP_OBSERVE_CLIENT */
       } /* request or response */
     } /* parsed correctly */
 

apps/er-coap/er-coap-engine.h

@@ -44,6 +44,7 @@
 #include "er-coap-transactions.h"
 #include "er-coap-observe.h"
 #include "er-coap-separate.h"
+#include "er-coap-observe-client.h"
 
 #define SERVER_LISTEN_PORT      UIP_HTONS(COAP_SERVER_PORT)
 

apps/er-coap/er-coap-observe-client.c

@@ -0,0 +1,342 @@
+/*
+ * Copyright (c) 2014, Daniele Alessandrelli.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+
+/*
+ * \file
+ *        Extension to Erbium for enabling CoAP observe clients
+ * \author
+ *        Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "er-coap.h"
+#include "er-coap-observe-client.h"
+
+/* Compile this code only if client-side support for CoAP Observe is required */
+#if COAP_OBSERVE_CLIENT
+
+#define DEBUG 1
+#if DEBUG
+#define PRINTF(...) printf(__VA_ARGS__)
+#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:" \
+                                "%02x%02x:%02x%02x:%02x%02x:%02x%02x]", \
+                                ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], \
+                                ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], \
+                                ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], \
+                                ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], \
+                                ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], \
+                                ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], \
+                                ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], \
+                                ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
+#define PRINTLLADDR(lladdr) PRINTF("[%02x:%02x:%02x:%02x:%02x:%02x]", \
+                                   (lladdr)->addr[0], (lladdr)->addr[1], \
+                                   (lladdr)->addr[2], (lladdr)->addr[3], \
+                                   (lladdr)->addr[4], (lladdr)->addr[5])
+#else
+#define PRINTF(...)
+#define PRINT6ADDR(addr)
+#define PRINTLLADDR(addr)
+#endif
+
+MEMB(obs_subjects_memb, coap_observee_t, COAP_MAX_OBSERVEES);
+LIST(obs_subjects_list);
+
+/*----------------------------------------------------------------------------*/
+static size_t
+get_token(void *packet, const uint8_t **token)
+{
+  coap_packet_t *const coap_pkt = (coap_packet_t *)packet;
+
+  *token = coap_pkt->token;
+
+  return coap_pkt->token_len;
+}
+/*----------------------------------------------------------------------------*/
+static int
+set_token(void *packet, const uint8_t *token, size_t token_len)
+{
+  coap_packet_t *const coap_pkt = (coap_packet_t *)packet;
+
+  coap_pkt->token_len = MIN(COAP_TOKEN_LEN, token_len);
+  memcpy(coap_pkt->token, token, coap_pkt->token_len);
+
+  return coap_pkt->token_len;
+}
+/*----------------------------------------------------------------------------*/
+coap_observee_t *
+coap_obs_add_observee(uip_ipaddr_t *addr, uint16_t port,
+                      const uint8_t *token, size_t token_len, const char *url,
+                      notification_callback_t notification_callback,
+                      void *data)
+{
+  coap_observee_t *o;
+
+  /* Remove existing observe relationship, if any. */
+  coap_obs_remove_observee_by_url(addr, port, url);
+  o = memb_alloc(&obs_subjects_memb);
+  if(o) {
+    o->url = url;
+    uip_ipaddr_copy(&o->addr, addr);
+    o->port = port;
+    o->token_len = token_len;
+    memcpy(o->token, token, token_len);
+    /* o->last_mid = 0; */
+    o->notification_callback = notification_callback;
+    o->data = data;
+    /* stimer_set(&o->refresh_timer, COAP_OBSERVING_REFRESH_INTERVAL); */
+    PRINTF("Adding obs_subject for /%s [0x%02X%02X]\n", o->url, o->token[0],
+           o->token[1]);
+    list_add(obs_subjects_list, o);
+  }
+
+  return o;
+}
+/*----------------------------------------------------------------------------*/
+void
+coap_obs_remove_observee(coap_observee_t *o)
+{
+  PRINTF("Removing obs_subject for /%s [0x%02X%02X]\n", o->url, o->token[0],
+         o->token[1]);
+  memb_free(&obs_subjects_memb, o);
+  list_remove(obs_subjects_list, o);
+}
+/*----------------------------------------------------------------------------*/
+coap_observee_t *
+coap_get_obs_subject_by_token(const uint8_t *token, size_t token_len)
+{
+  coap_observee_t *obs = NULL;
+
+  for(obs = (coap_observee_t *)list_head(obs_subjects_list); obs;
+      obs = obs->next) {
+    PRINTF("Looking for token 0x%02X%02X\n", token[0], token[1]);
+    if(obs->token_len == token_len
+       && memcmp(obs->token, token, token_len) == 0) {
+      return obs;
+    }
+  }
+
+  return NULL;
+}
+/*----------------------------------------------------------------------------*/
+int
+coap_obs_remove_observee_by_token(uip_ipaddr_t *addr, uint16_t port,
+                                  uint8_t *token, size_t token_len)
+{
+  int removed = 0;
+  coap_observee_t *obs = NULL;
+
+  for(obs = (coap_observee_t *)list_head(obs_subjects_list); obs;
+      obs = obs->next) {
+    PRINTF("Remove check Token 0x%02X%02X\n", token[0], token[1]);
+    if(uip_ipaddr_cmp(&obs->addr, addr)
+       && obs->port == port
+       && obs->token_len == token_len
+       && memcmp(obs->token, token, token_len) == 0) {
+      coap_obs_remove_observee(obs);
+      removed++;
+    }
+  }
+  return removed;
+}
+/*----------------------------------------------------------------------------*/
+int
+coap_obs_remove_observee_by_url(uip_ipaddr_t *addr, uint16_t port,
+                                const char *url)
+{
+  int removed = 0;
+  coap_observee_t *obs = NULL;
+
+  for(obs = (coap_observee_t *)list_head(obs_subjects_list); obs;
+      obs = obs->next) {
+    PRINTF("Remove check URL %s\n", url);
+    if(uip_ipaddr_cmp(&obs->addr, addr)
+       && obs->port == port
+       && (obs->url == url || memcmp(obs->url, url, strlen(obs->url)) == 0)) {
+      coap_obs_remove_observee(obs);
+      removed++;
+    }
+  }
+  return removed;
+}
+/*----------------------------------------------------------------------------*/
+static void
+simple_reply(coap_message_type_t type, uip_ip6addr_t *addr, uint16_t port,
+             coap_packet_t *notification)
+{
+  static coap_packet_t response[1];
+  size_t len;
+
+  coap_init_message(response, type, NO_ERROR, notification->mid);
+  len = coap_serialize_message(response, uip_appdata);
+  coap_send_message(addr, port, uip_appdata, len);
+}
+/*----------------------------------------------------------------------------*/
+static coap_notification_flag_t
+classify_notification(void *response, int first)
+{
+  coap_packet_t *pkt;
+
+  pkt = (coap_packet_t *)response;
+  if(!pkt) {
+    PRINTF("no response\n");
+    return NO_REPLY_FROM_SERVER;
+  }
+  PRINTF("server replied\n");
+  if(!IS_RESPONSE_CODE_2_XX(pkt)) {
+    PRINTF("error response code\n");
+    return ERROR_RESPONSE_CODE;
+  }
+  if(!IS_OPTION(pkt, COAP_OPTION_OBSERVE)) {
+    PRINTF("server does not support observe\n");
+    return OBSERVE_NOT_SUPPORTED;
+  }
+  if(first) {
+    return OBSERVE_OK;
+  }
+  return NOTIFICATION_OK;
+}
+/*----------------------------------------------------------------------------*/
+void
+coap_handle_notification(uip_ipaddr_t *addr, uint16_t port,
+                         coap_packet_t *notification)
+{
+  coap_packet_t *pkt;
+  const uint8_t *token;
+  int token_len;
+  coap_observee_t *obs;
+  coap_notification_flag_t flag;
+  uint32_t observe;
+
+  PRINTF("coap_handle_notification()\n");
+  pkt = (coap_packet_t *)notification;
+  token_len = get_token(pkt, &token);
+  PRINTF("Getting token\n");
+  if(0 == token_len) {
+    PRINTF("Error while handling coap observe notification: "
+           "no token in message\n");
+    return;
+  }
+  PRINTF("Getting observee info\n");
+  obs = coap_get_obs_subject_by_token(token, token_len);
+  if(NULL == obs) {
+    PRINTF("Error while handling coap observe notification: "
+           "no matching token found\n");
+    simple_reply(COAP_TYPE_RST, addr, port, notification);
+    return;
+  }
+  if(notification->type == COAP_TYPE_CON) {
+    simple_reply(COAP_TYPE_ACK, addr, port, notification);
+  }
+  if(obs->notification_callback != NULL) {
+    flag = classify_notification(notification, 0);
+    /* TODO: the following mechanism for discarding duplicates is too trivial */
+    /* refer to Observe RFC for a better solution */
+    if(flag == NOTIFICATION_OK) {
+      coap_get_header_observe(notification, &observe);
+      if(observe == obs->last_observe) {
+        PRINTF("Discarding duplicate\n");
+        return;
+      }
+      obs->last_observe = observe;
+    }
+    obs->notification_callback(obs, notification, flag);
+  }
+}
+/*----------------------------------------------------------------------------*/
+static void
+handle_obs_registration_response(void *data, void *response)
+{
+  coap_observee_t *obs;
+  notification_callback_t notification_callback;
+  coap_notification_flag_t flag;
+
+  PRINTF("handle_obs_registration_response(): ");
+  obs = (coap_observee_t *)data;
+  notification_callback = obs->notification_callback;
+  flag = classify_notification(response, 1);
+  if(notification_callback) {
+    notification_callback(obs, response, flag);
+  }
+  if(flag != OBSERVE_OK) {
+    coap_obs_remove_observee(obs);
+  }
+}
+/*----------------------------------------------------------------------------*/
+uint8_t
+coap_generate_token(uint8_t **token_ptr)
+{
+  static uint8_t token = 0;
+
+  token++;
+  /* FIXME: we should check that this token is not already used */
+  *token_ptr = (uint8_t *)&token;
+  return sizeof(token);
+}
+/*----------------------------------------------------------------------------*/
+coap_observee_t *
+coap_obs_request_registration(uip_ipaddr_t *addr, uint16_t port, char *uri,
+                              notification_callback_t notification_callback,
+                              void *data)
+{
+  coap_packet_t request[1];
+  coap_transaction_t *t;
+  uint8_t *token;
+  uint8_t token_len;
+  coap_observee_t *obs;
+
+  obs = NULL;
+  coap_init_message(request, COAP_TYPE_CON, COAP_GET, coap_get_mid());
+  coap_set_header_uri_path(request, uri);
+  coap_set_header_observe(request, 0);
+  token_len = coap_generate_token(&token);
+  set_token(request, token, token_len);
+  t = coap_new_transaction(request->mid, addr, port);
+  if(t) {
+    obs = coap_obs_add_observee(addr, port, (uint8_t *)token, token_len, uri,
+                                notification_callback, data);
+    if(obs) {
+      t->callback = handle_obs_registration_response;
+      t->callback_data = obs;
+      t->packet_len = coap_serialize_message(request, t->packet);
+      coap_send_transaction(t);
+    } else {
+      PRINTF("Could not allocate obs_subject resource buffer");
+      coap_clear_transaction(t);
+    }
+  } else {
+    PRINTF("Could not allocate transaction buffer");
+  }
+  return obs;
+}
+#endif /* COAP_OBSERVE_CLIENT */

apps/er-coap/er-coap-observe-client.h

@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2014, Daniele Alessandrelli.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+
+/*
+ * \file
+ *        Extension to Erbium for enabling CoAP observe clients
+ * \author
+ *        Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
+ */
+
+#ifndef COAP_OBSERVING_CLIENT_H_
+#define COAP_OBSERVING_CLIENT_H_
+
+#include "er-coap.h"
+#include "er-coap-transactions.h"
+
+#ifndef COAP_OBSERVE_CLIENT
+#define COAP_OBSERVE_CLIENT 0
+#endif
+
+#ifdef COAP_CONF_MAX_OBSERVEES
+#define COAP_MAX_OBSERVEES COAP_CONF_MAX_OBSERVEES
+#else
+#define COAP_MAX_OBSERVEES      4
+#endif /* COAP_CONF_MAX_OBSERVEES */
+
+#if COAP_MAX_OPEN_TRANSACTIONS < COAP_MAX_OBSERVEES
+#warning "COAP_MAX_OPEN_TRANSACTIONS smaller than COAP_MAX_OBSERVEES: " \
+  "this may be a problem"
+#endif
+
+#define IS_RESPONSE_CODE_2_XX(message) (64 < message->code \
+                                        && message->code < 128)
+
+/*----------------------------------------------------------------------------*/
+typedef enum {
+  OBSERVE_OK,
+  NOTIFICATION_OK,
+  OBSERVE_NOT_SUPPORTED,
+  ERROR_RESPONSE_CODE,
+  NO_REPLY_FROM_SERVER,
+} coap_notification_flag_t;
+
+/*----------------------------------------------------------------------------*/
+typedef struct coap_observee_s coap_observee_t;
+
+typedef void (*notification_callback_t)(coap_observee_t *subject,
+                                        void *notification,
+                                        coap_notification_flag_t);
+
+struct coap_observee_s {
+  coap_observee_t *next;        /* for LIST */
+  uip_ipaddr_t addr;
+  uint16_t port;
+  const char *url;
+  uint8_t token_len;
+  uint8_t token[COAP_TOKEN_LEN];
+  void *data;                   /* generic pointer for storing user data */
+  notification_callback_t notification_callback;
+  uint32_t last_observe;
+};
+
+/*----------------------------------------------------------------------------*/
+coap_observee_t *coap_obs_add_observee(uip_ipaddr_t *addr, uint16_t port,
+                                       const uint8_t *token, size_t token_len,
+                                       const char *url,
+                                       notification_callback_t
+                                       notification_callback, void *data);
+
+void coap_obs_remove_observee(coap_observee_t *o);
+
+coap_observee_t *coap_obs_get_observee_by_token(const uint8_t *token,
+                                                size_t token_len);
+
+int coap_obs_remove_observee_by_token(uip_ipaddr_t *addr, uint16_t port,
+                                      uint8_t *token, size_t token_len);
+
+int coap_obs_remove_observee_by_url(uip_ipaddr_t *addr, uint16_t port,
+                                    const char *url);
+
+void coap_handle_notification(uip_ipaddr_t *, uint16_t port,
+                              coap_packet_t *notification);
+
+coap_observee_t *coap_obs_request_registration(uip_ipaddr_t *addr,
+                                               uint16_t port, char *uri,
+                                               notification_callback_t
+                                               notification_callback,
+                                               void *data);
+/* TODO: this function may be moved to er-coap.c */
+uint8_t coap_generate_token(uint8_t **token_ptr);
+
+#endif /* COAP_OBSERVING_CLIENT_H_ */

core/net/rpl/rpl-dag.c

@@ -789,7 +789,6 @@ rpl_nullify_parent(rpl_parent_t *parent)
   /* This function can be called when the preferred parent is NULL, so we
      need to handle this condition in order to trigger uip_ds6_defrt_rm. */
   if(parent == dag->preferred_parent || dag->preferred_parent == NULL) {
-    rpl_set_preferred_parent(dag, NULL);
     dag->rank = INFINITE_RANK;
     if(dag->joined) {
       if(dag->instance->def_route != NULL) {
@@ -799,7 +798,11 @@ rpl_nullify_parent(rpl_parent_t *parent)
         uip_ds6_defrt_rm(dag->instance->def_route);
         dag->instance->def_route = NULL;
       }
+      /* Send no-path DAO only to preferred parent, if any */
+      if(parent == dag->preferred_parent) {
         dao_output(parent, RPL_ZERO_LIFETIME);
+        rpl_set_preferred_parent(dag, NULL);
+      }
     }
   }
 
@@ -972,6 +975,7 @@ rpl_join_instance(uip_ipaddr_t *from, rpl_dio_t *dio)
   }
 }
 
+#if RPL_MAX_DAG_PER_INSTANCE > 1
 /*---------------------------------------------------------------------------*/
 void
 rpl_add_dag(uip_ipaddr_t *from, rpl_dio_t *dio)
@@ -1051,6 +1055,7 @@ rpl_add_dag(uip_ipaddr_t *from, rpl_dio_t *dio)
   rpl_process_parent_event(instance, p);
   p->dtsn = dio->dtsn;
 }
+#endif /* RPL_MAX_DAG_PER_INSTANCE > 1 */
 
 /*---------------------------------------------------------------------------*/
 static void
@@ -1246,9 +1251,14 @@ rpl_process_dio(uip_ipaddr_t *from, rpl_dio_t *dio)
   }
 
   if(dag == NULL) {
+#if RPL_MAX_DAG_PER_INSTANCE > 1
     PRINTF("RPL: Adding new DAG to known instance.\n");
     rpl_add_dag(from, dio);
     return;
+#else /* RPL_MAX_DAG_PER_INSTANCE > 1 */
+    PRINTF("RPL: Only one instance supported.\n");
+    return;
+#endif /* RPL_MAX_DAG_PER_INSTANCE > 1 */
   }
 
 

cpu/cc26xx/Makefile.cc26xx

@@ -0,0 +1,132 @@
+CC      = arm-none-eabi-gcc
+CPP     = arm-none-eabi-cpp
+LD      = arm-none-eabi-gcc
+AR      = arm-none-eabi-ar
+OBJCOPY = arm-none-eabi-objcopy
+OBJDUMP = arm-none-eabi-objdump
+NM      = arm-none-eabi-nm
+SIZE    = arm-none-eabi-size
+
+### TI CC26xxware out-of-tree
+### TI_CC26XXWARE is the home directory of the cc26xxware
+### It MUST be provided as a path relative to $(CONTIKI)
+### For example, if
+### CONTIKI = /home/user/contiki
+### and TI_CC26XXWARE is stored in
+### /home/user/cc26xxware
+### then set
+### TI_CC26XXWARE = ../cc26xxware
+ifndef TI_CC26XXWARE
+  $(error TI_CC26XXWARE not defined. Please see the README)
+endif
+
+### cc26xxware sources will be added to the MODULES list
+TI_CC26XXWARE_SRC = $(TI_CC26XXWARE)/driverlib
+
+### The directory with startup sources will be added to the CONTIKI_CPU_DIRS
+### and the sources therein are added to the sources list explicitly. They are
+### also listed explicitly in the linker command (through TARGET_STARTFILES),
+### to make sure they always get linked in the image
+TI_CC26XXWARE_STARTUP = ../../$(TI_CC26XXWARE)/startup_files
+TI_CC26XXWARE_STARTUP_SRCS = ccfg.c startup_gcc.c
+
+### MODULES will add some of these to the include pach, but we need to add
+### them earlier to prevent filename clashes with Contiki core files
+CFLAGS += -I$(CONTIKI)/$(TI_CC26XXWARE) -I$(CONTIKI)/$(TI_CC26XXWARE_SRC) 
+CFLAGS += -I$(CONTIKI)/$(TI_CC26XXWARE)/inc
+MODULES += $(TI_CC26XXWARE_SRC)
+
+LDSCRIPT = $(CONTIKI_CPU)/cc26xx.ld
+
+CFLAGS += -mcpu=cortex-m3 -mthumb -mlittle-endian
+CFLAGS += -ffunction-sections -fdata-sections
+CFLAGS += -fshort-enums -fomit-frame-pointer -fno-strict-aliasing
+CFLAGS += -Wall -std=c99
+
+### Workaround for driverlib's cpu.h which tests if defined(gcc)
+### Delete if it gets fixed or if we stop using the driverlib
+CFLAGS += -Dgcc=__GNUC__
+
+LDFLAGS += -mcpu=cortex-m3 -mthumb -mlittle-endian -nostartfiles
+LDFLAGS += -T $(LDSCRIPT)
+LDFLAGS += -Wl,--gc-sections,--sort-section=alignment
+LDFLAGS += -Wl,-Map=$(@:.elf=-$(TARGET).map),--cref,--no-warn-mismatch
+OBJCOPY_FLAGS += -O binary --gap-fill 0xff
+OBJDUMP_FLAGS += --disassemble --source --disassembler-options=force-thumb
+
+### Are we building with code size optimisations?
+ifeq ($(SMALL),1)
+  CFLAGS += -Os
+else
+  CFLAGS += -O2
+endif
+
+### If the user-specified a Node ID, pass a define
+ifdef NODEID
+  CFLAGS += -DIEEE_ADDR_NODE_ID=$(NODEID)
+endif
+
+### CPU-dependent cleanup files
+CLEAN += symbols.c symbols.h *.d *.elf *.hex
+
+### CPU-dependent directories
+CONTIKI_CPU_DIRS = . dev dev/rfc-api $(TI_CC26XXWARE_STARTUP)
+
+### Use the existing debug I/O in cpu/arm/common
+CONTIKI_CPU_DIRS += ../arm/common/dbg-io
+
+### CPU-dependent source files
+CONTIKI_CPU_SOURCEFILES += clock.c rtimer-arch.c cc26xx-rtc.c uart.c
+CONTIKI_CPU_SOURCEFILES += cc26xx-rf.c contiki-watchdog.c
+CONTIKI_CPU_SOURCEFILES += putchar.c ieee-addr.c batmon-sensor.c
+CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c cc26xx-uart.c lpm.c
+CONTIKI_CPU_SOURCEFILES += gpio-interrupt.c
+
+DEBUG_IO_SOURCEFILES += dbg-printf.c dbg-snprintf.c dbg-sprintf.c strformat.c
+
+CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(DEBUG_IO_SOURCEFILES)
+
+TARGET_START_SOURCEFILES += fault-handlers.c $(TI_CC26XXWARE_STARTUP_SRCS)
+TARGET_STARTFILES = $(addprefix $(OBJECTDIR)/,$(call oname, $(TARGET_START_SOURCEFILES)))
+
+### Don't treat the .elf as intermediate
+.PRECIOUS: %.elf %.hex %.bin
+
+### Always re-build ieee-addr.o in case the command line passes a new NODEID
+FORCE:
+
+$(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE | $(OBJECTDIR)
+	$(TRACE_CC)
+	$(Q)$(CC) $(CFLAGS) -c $< -o $@
+
+### Compilation rules
+CUSTOM_RULE_LINK=1
+
+%.elf: $(TARGET_STARTFILES) %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(LDSCRIPT)
+	$(TRACE_LD)
+	$(Q)$(LD) $(LDFLAGS) ${filter-out $(LDSCRIPT) %.a,$^} ${filter %.a,$^} $(TARGET_LIBFILES) -lm -o $@
+
+%.hex: %.elf
+	$(OBJCOPY) -O ihex $< $@
+
+%.bin: %.elf
+	$(OBJCOPY) $(OBJCOPY_FLAGS) $< $@
+
+%.lst: %.elf
+	$(OBJDUMP) $(OBJDUMP_FLAGS) $< > $@
+
+### We don't really need the .hex and .bin for the .$(TARGET) but let's make
+### sure they get built
+%.$(TARGET): %.elf %.hex %.bin
+	cp $< $@
+
+# a target that gives a user-friendly memory profile, taking into account the RAM
+# that is statically occupied by the stack as defined in the linker script
+# see $(LDSCRIPT)
+RAM_SIZE = 0x00003E00
+FLASH_SIZE = 0x0001E000
+STACK_SIZE = 0
+%.size: %.$(TARGET)
+	@$(SIZE) -A $< | egrep "data|bss" | awk '{s+=$$2} END {s=s+$(STACK_SIZE); f=$(RAM_SIZE)-s; printf "[RAM]   used %6d, free %6d\n",s,f;}'
+	@$(SIZE) -A $< | egrep "text|isr_vector" | awk '{s+=$$2} END {f=$(FLASH_SIZE)-s; printf "[Flash] used %6d, free %6d\n",s,f;}'
+

cpu/cc26xx/cc26xx-model.h

@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-models CC26xx models
+ *
+ * The CC26xx comes out in various flavours. Most notable within the context
+ * of this Contiki port: The CC2630 with IEEE (but no BLE) support and the
+ * CC2650 with IEEE and BLE support.
+ *
+ * This port supports both models and will automatically turn off the BLE code
+ * if the CC2630 is selected.
+ *
+ * @{
+ */
+/**
+ * \file
+ * Header file with definitions relating to various CC26xx variants
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef CC26XX_MODEL_H_
+#define CC26XX_MODEL_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+/*---------------------------------------------------------------------------*/
+#ifdef CC26XX_MODEL_CONF_CPU_VARIANT
+#define CC26XX_MODEL_CPU_VARIANT CC26XX_MODEL_CONF_CPU_VARIANT
+#else
+#define CC26XX_MODEL_CPU_VARIANT 2650
+#endif
+
+#if (CC26XX_MODEL_CPU_VARIANT != 2630) && (CC26XX_MODEL_CPU_VARIANT != 2650)
+#error Incorrect CC26xx variant selected.
+#error Check the value of CC26XX_MODEL_CONF_CPU_VARIANT
+#error Supported values: 2630 and 2650
+#endif
+/*---------------------------------------------------------------------------*/
+#endif /* CC26XX_MODEL_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/cc26xx.ld

@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* CC26XX linker script */
+
+/* Entry Point */
+ENTRY(ResetISR)
+
+MEMORY
+{
+    /* Flash Size 128 KB minus the CCA area below (76 bytes) */
+    FLASH (RX) : ORIGIN = 0x00000000, LENGTH = 0x0001FFAC
+
+    /*
+     * Customer Configuration Area and Bootloader Backdoor configuration
+     * in flash, up to 80 bytes
+     */
+    FLASH_CCFG (RX) : ORIGIN = 0x0001FFAC, LENGTH = 84
+
+    /* RAM Size 20KB (PG2.1) */
+    SRAM (RWX) : ORIGIN = 0x20000000, LENGTH = 0x00005000
+}
+
+/*. Highest address of the stack. Used in startup file .*/
+_estack = ORIGIN(SRAM) + LENGTH(SRAM); /* End of SRAM */
+
+/*. Generate a link error if heap and stack don’t fit into RAM .*/
+_Min_Heap_Size = 0;
+_Min_Stack_Size = 0x100;
+
+SECTIONS
+{
+    .text :
+    {
+        _text = .;
+        KEEP(*(.vectors))
+        *(.text*)
+        *(.rodata*)
+        _etext = .;
+    } > FLASH = 0
+
+    .data :
+    {
+        _data = .;
+        *(vtable)
+        *(.data*)
+        _edata = .;
+    } > SRAM AT > FLASH
+
+    .ARM.exidx :
+    {
+        *(.ARM.exidx*)
+    } > FLASH
+
+    .bss :
+    {
+        _bss = .;
+        *(.bss*)
+        *(COMMON)
+        _ebss = .;
+    } > SRAM
+
+    .ccfg :
+    {
+        KEEP(*(.ccfg))
+    } > FLASH_CCFG
+
+    /* User_heap_stack section, used to check that there is enough RAM left */
+    ._user_heap_stack :
+    {
+      . = ALIGN(4);
+      . = . + _Min_Heap_Size;
+      . = . + _Min_Stack_Size;
+      . = ALIGN(4);
+    } >SRAM
+}

cpu/cc26xx/clock.c

@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup platform
+ * @{
+ *
+ * \defgroup cc26xx-platforms TI CC26xx-powered Platforms
+ * @{
+ *
+ * \defgroup cc26xx The TI CC26xx CPU
+ * @{
+ *
+ * \addtogroup cc26xx-clocks
+ * @{
+ *
+ * \defgroup cc26xx-software-clock CC26xx Software Clock
+ *
+ * Implementation of the clock module for the cc26xx.
+ *
+ * The software clock uses the facilities provided by the AON RTC driver
+ * @{
+ *
+ * \file
+ * Software clock implementation for the TI CC26xx
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+
+#include "ti-lib.h"
+/*---------------------------------------------------------------------------*/
+static volatile clock_time_t count;
+static volatile clock_time_t second_countdown;
+static volatile unsigned long secs;
+/*---------------------------------------------------------------------------*/
+static void
+power_domain_on(void)
+{
+  ti_lib_prcm_power_domain_on(PRCM_DOMAIN_PERIPH);
+  while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_PERIPH) !=
+        PRCM_DOMAIN_POWER_ON);
+}
+/*---------------------------------------------------------------------------*/
+void
+clock_init(void)
+{
+  count = 0;
+  secs = 0;
+  second_countdown = CLOCK_SECOND;
+
+  /*
+   * Here, we configure GPT0 Timer A, which we subsequently use in
+   * clock_delay_usec
+   *
+   * First, enable GPT0 in run mode. We don't need it in sleep mode
+   */
+  ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_TIMER0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* Disable both GPT0 timers */
+  HWREG(GPT0_BASE + GPT_O_CTL) &= ~(GPT_CTL_TAEN | GPT_CTL_TBEN);
+
+  /*
+   * We assume that the clock is running at 48MHz, we use GPT0 Timer A,
+   * one-shot, countdown, prescaled by 48 gives us 1 tick per usec
+   */
+  ti_lib_timer_configure(GPT0_BASE,
+                         TIMER_CFG_SPLIT_PAIR | TIMER_CFG_B_ONE_SHOT);
+
+  /* Global config: split pair (2 x 16-bit wide) */
+  HWREG(GPT0_BASE + GPT_O_CFG) = TIMER_CFG_SPLIT_PAIR >> 24;
+
+  /*
+   * Pre-scale value 47 pre-scales by 48
+   *
+   * ToDo: The theoretical value here should be 47 (to provide x48 prescale)
+   * However, 49 seems to give results much closer to the desired delay
+   */
+  ti_lib_timer_prescale_set(GPT0_BASE, TIMER_B, 49);
+
+  /* GPT0 / Timer B: One shot, PWM interrupt enable */
+  HWREG(GPT0_BASE + GPT_O_TBMR) =
+        ((TIMER_CFG_B_ONE_SHOT >> 8) & 0xFF) | GPT_TBMR_TBPWMIE;
+}
+/*---------------------------------------------------------------------------*/
+CCIF clock_time_t
+clock_time(void)
+{
+  return count;
+}
+/*---------------------------------------------------------------------------*/
+void
+clock_update(void)
+{
+  count++;
+  if(etimer_pending()) {
+    etimer_request_poll();
+  }
+
+  if(--second_countdown == 0) {
+    secs++;
+    second_countdown = CLOCK_SECOND;
+  }
+}
+/*---------------------------------------------------------------------------*/
+void
+clock_set_seconds(unsigned long sec)
+{
+  secs = sec;
+}
+/*---------------------------------------------------------------------------*/
+CCIF unsigned long
+clock_seconds(void)
+{
+  return secs;
+}
+/*---------------------------------------------------------------------------*/
+void
+clock_wait(clock_time_t i)
+{
+  clock_time_t start;
+
+  start = clock_time();
+  while(clock_time() - start < (clock_time_t)i);
+}
+/*---------------------------------------------------------------------------*/
+void
+clock_delay_usec(uint16_t len)
+{
+  if(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_PERIPH) !=
+     PRCM_DOMAIN_POWER_ON) {
+    power_domain_on();
+  }
+
+  ti_lib_timer_load_set(GPT0_BASE, TIMER_B, len);
+  ti_lib_timer_enable(GPT0_BASE, TIMER_B);
+
+  /*
+   * Wait for TBEN to clear. CC26xxware does not provide us with a convenient
+   * function, hence the direct register access here
+   */
+  while(HWREG(GPT0_BASE | GPT_O_CTL) & GPT_CTL_TBEN);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Obsolete delay function but we implement it here since some code
+ * still uses it
+ */
+void
+clock_delay(unsigned int i)
+{
+  clock_delay_usec(i);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ * @}
+ * @}
+ * @}
+ */

cpu/cc26xx/dbg.h

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-char-io CC26xx Character I/O
+ *
+ * CC26xx CPU-specific functions for debugging and SLIP I/O
+ * @{
+ *
+ * \file
+ * Header file for the CC26xx Debug I/O module
+ */
+#ifndef DBG_H_
+#define DBG_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Print a stream of bytes
+ * \param seq A pointer to the stream
+ * \param len The number of bytes to print
+ * \return The number of printed bytes
+ *
+ * This function is an arch-specific implementation required by the dbg-io
+ * API in cpu/arm/common/dbg-io. It prints a stream of bytes over the
+ * peripheral used by the platform.
+ */
+unsigned int dbg_send_bytes(const unsigned char *seq, unsigned int len);
+/*---------------------------------------------------------------------------*/
+#endif /* DBG_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/debug-uart.h

@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-char-io
+ * @{
+ *
+ * \file
+ * This file is here because DBG I/O expects it to be. It just includes
+ * our own dbg.h which has a non-misleading name and which also adheres
+ * to Contiki's naming convention
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef DEBUG_UART_H_
+#define DEBUG_UART_H_
+/*---------------------------------------------------------------------------*/
+#include "dbg.h"
+/*---------------------------------------------------------------------------*/
+#endif /* DEBUG_UART_H_ */
+/*---------------------------------------------------------------------------*/
+/** @} */

cpu/cc26xx/dev/batmon-sensor.c

@@ -0,0 +1,143 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-batmon
+ * @{
+ *
+ * \file
+ *  Driver for the CC26xx AON battery monitor
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "lib/sensors.h"
+#include "batmon-sensor.h"
+
+#include "ti-lib.h"
+
+#include <stdint.h>
+#include <stdio.h>
+/*---------------------------------------------------------------------------*/
+#define DEBUG 0
+#if DEBUG
+#define PRINTF(...) printf(__VA_ARGS__)
+#else
+#define PRINTF(...)
+#endif
+/*---------------------------------------------------------------------------*/
+#define SENSOR_STATUS_DISABLED 0
+#define SENSOR_STATUS_ENABLED  1
+
+static int enabled = SENSOR_STATUS_DISABLED;
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Returns a reading from the sensor
+ * \param type BATMON_SENSOR_TYPE_TEMP or BATMON_SENSOR_TYPE_VOLT
+ *
+ * \return The raw sensor reading, not converted to human-readable form
+ */
+static int
+value(int type)
+{
+  uint32_t tmp_value;
+
+  if(enabled == SENSOR_STATUS_DISABLED) {
+    PRINTF("Sensor Disabled\n");
+    return 0;
+  }
+
+  if(type == BATMON_SENSOR_TYPE_TEMP) {
+    tmp_value = ti_lib_aon_batmon_temperature_get();
+  } else if(type == BATMON_SENSOR_TYPE_VOLT) {
+    tmp_value = ti_lib_aon_batmon_battery_voltage_get();
+  } else {
+    PRINTF("Invalid type\n");
+    return 0;
+  }
+
+  return (int)tmp_value;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Configuration function for the battery monitor sensor.
+ *
+ * \param type Activate, enable or disable the sensor. See below
+ * \param enable If
+ *
+ * When type == SENSORS_HW_INIT we turn on the hardware
+ * When type == SENSORS_ACTIVE and enable==1 we enable the sensor
+ * When type == SENSORS_ACTIVE and enable==0 we disable the sensor
+ */
+static int
+configure(int type, int enable)
+{
+  switch(type) {
+  case SENSORS_HW_INIT:
+    ti_lib_aon_batmon_enable();
+    ti_lib_aon_batmon_measurement_cycle_set(AON_BATMON_CYCLE_32);
+    enabled = SENSOR_STATUS_ENABLED;
+    break;
+  case SENSORS_ACTIVE:
+    if(enable) {
+      ti_lib_aon_batmon_enable();
+      enabled = SENSOR_STATUS_ENABLED;
+    } else {
+      ti_lib_aon_batmon_disable();
+      enabled = SENSOR_STATUS_DISABLED;
+    }
+    break;
+  default:
+    break;
+  }
+  return enabled;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Returns the status of the sensor
+ * \param type SENSORS_ACTIVE or SENSORS_READY
+ * \return 1 if the sensor is enabled
+ */
+static int
+status(int type)
+{
+  switch(type) {
+  case SENSORS_ACTIVE:
+  case SENSORS_READY:
+    return enabled;
+    break;
+  default:
+    break;
+  }
+  return SENSOR_STATUS_DISABLED;
+}
+/*---------------------------------------------------------------------------*/
+SENSORS_SENSOR(batmon_sensor, "Battery Monitor", value, configure, status);
+/*---------------------------------------------------------------------------*/
+/** @} */

cpu/cc26xx/dev/batmon-sensor.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-batmon CC26xx BatMon sensor driver
+ *
+ * Driver for the on-chip battery voltage and chip temperature sensor.
+ * @{
+ *
+ * \file
+ * Header file for the CC26xx battery monitor
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BATMON_SENSOR_H_
+#define BATMON_SENSOR_H_
+/*---------------------------------------------------------------------------*/
+#define BATMON_SENSOR_TYPE_TEMP    1
+#define BATMON_SENSOR_TYPE_VOLT    2
+/*---------------------------------------------------------------------------*/
+extern const struct sensors_sensor batmon_sensor;
+/*---------------------------------------------------------------------------*/
+#endif /* BATMON_SENSOR_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/cc26xx-rf.h

@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-rf CC26xx RF driver
+ *
+ * The CC26xx RF has dual capability: It can operate in IEEE 802.15.4 mode at
+ * 2.4GHz, but it can also operate in BLE mode. This driver provides a fully
+ * contiki-compliant .15.4 functionality, but it also provides some very basic
+ * BLE capability.
+ *
+ * @{
+ */
+/**
+ * \file
+ * Header file for the CC26xx RF driver
+ */
+#ifndef CC26XX_RF_H_
+#define CC26XX_RF_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "cc26xx-model.h"
+#include "dev/radio.h"
+/*---------------------------------------------------------------------------*/
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#ifdef CC26XX_RF_CONF_CHANNEL
+#define CC26XX_RF_CHANNEL CC26XX_RF_CONF_CHANNEL
+#else
+#define CC26XX_RF_CHANNEL 18
+#endif /* CC26XX_RF_CONF_CHANNEL */
+
+#ifdef CC26XX_RF_CONF_AUTOACK
+#define CC26XX_RF_AUTOACK CC26XX_RF_CONF_AUTOACK
+#else
+#define CC26XX_RF_AUTOACK 1
+#endif /* CC26XX_RF_CONF_AUTOACK */
+
+#if defined (CC26XX_RF_CONF_BLE_SUPPORT) && (CC26XX_MODEL_CPU_VARIANT == 2650)
+#define CC26XX_RF_BLE_SUPPORT CC26XX_RF_CONF_BLE_SUPPORT
+#else
+#define CC26XX_RF_BLE_SUPPORT 0
+#endif
+/*---------------------------------------------------------------------------
+ * RF Config
+ *---------------------------------------------------------------------------*/
+/* Constants */
+#define CC26XX_RF_CHANNEL_MIN            11
+#define CC26XX_RF_CHANNEL_MAX            26
+#define CC26XX_RF_CHANNEL_SPACING         5
+#define CC26XX_RF_CHANNEL_SET_ERROR      -1
+#define CC26XX_RF_MAX_PACKET_LEN        127
+#define CC26XX_RF_MIN_PACKET_LEN          4
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Set the device name to use with the BLE advertisement/beacon daemon
+ * \param interval The interval (ticks) between two consecutive beacon bursts
+ * \param name The device name to advertise
+ *
+ * If name is NULL it will be ignored. If interval==0 it will be ignored. Thus,
+ * this function can be used to configure a single parameter at a time if so
+ * desired.
+ */
+void cc26xx_rf_ble_beacond_config(clock_time_t interval, const char *name);
+
+/**
+ * \brief Start the BLE advertisement/beacon daemon
+ * \return 1: Success, 0: Failure
+ *
+ * Before calling this function, the name to advertise must first be set by
+ * calling cc26xx_rf_ble_beacond_set_adv_name(). Otherwise, this function will
+ * return an error.
+ */
+uint8_t cc26xx_rf_ble_beacond_start(void);
+
+/**
+ * \brief Stop the BLE advertisement/beacon daemon
+ */
+void cc26xx_rf_ble_beacond_stop(void);
+/*---------------------------------------------------------------------------*/
+#endif /* CC26XX_RF_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/cc26xx-rtc.c

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-rtc
+ * @{
+ *
+ */
+/**
+ * \file
+ * Implementation of the CC26xx AON RTC driver
+ */
+#include "contiki.h"
+#include "sys/energest.h"
+#include "rtimer.h"
+#include "lpm.h"
+
+#include "ti-lib.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#define cc26xx_rtc_isr(...) AONRTCIntHandler(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* Prototype of a function in clock.c. Called every time the handler fires */
+void clock_update(void);
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_rtc_init(void)
+{
+  uint32_t compare_value;
+
+  /* Disable and clear interrupts */
+  ti_lib_int_master_disable();
+  ti_lib_aon_rtc_disable();
+
+  ti_lib_aon_rtc_event_clear(AON_RTC_CH0);
+  ti_lib_aon_rtc_event_clear(AON_RTC_CH2);
+
+  /* Setup the wakeup event */
+  ti_lib_aon_event_mcu_wake_up_set(AON_EVENT_MCU_WU0, AON_EVENT_RTC0);
+  ti_lib_aon_event_mcu_wake_up_set(AON_EVENT_MCU_WU1, AON_EVENT_RTC2);
+
+  /* Configure channel 2 in continuous compare, 128 ticks / sec */
+  compare_value = (RTIMER_SECOND / CLOCK_SECOND) +
+                  ti_lib_aon_rtc_current_compare_value_get();
+  ti_lib_aon_rtc_compare_value_set(AON_RTC_CH2, compare_value);
+  ti_lib_aon_rtc_inc_value_ch2_set(RTIMER_SECOND / CLOCK_SECOND);
+  ti_lib_aon_rtc_mode_ch2_set(AON_RTC_MODE_CH2_CONTINUOUS);
+
+  /* Enable event generation for channels 0 and 2 and enable the RTC */
+  ti_lib_aon_rtc_combined_event_config(AON_RTC_CH0 | AON_RTC_CH2);
+  ti_lib_aon_rtc_channel_enable(AON_RTC_CH2);
+
+  ti_lib_aon_rtc_enable();
+
+  ti_lib_int_enable(INT_AON_RTC);
+  ti_lib_int_master_enable();
+}
+/*---------------------------------------------------------------------------*/
+rtimer_clock_t
+cc26xx_rtc_get_next_trigger()
+{
+  rtimer_clock_t ch2 = ti_lib_aon_rtc_compare_value_get(AON_RTC_CH2);
+
+  if(HWREG(AON_RTC_BASE + AON_RTC_O_CHCTL) & AON_RTC_CHCTL_CH0_EN) {
+    rtimer_clock_t ch0 = ti_lib_aon_rtc_compare_value_get(AON_RTC_CH2);
+
+    return RTIMER_CLOCK_LT(ch0 ,ch2) ? ch0 : ch2;
+  }
+
+  return ch2;
+}
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_rtc_schedule_one_shot(uint32_t ticks)
+{
+  /* Set the channel to fire a one-shot compare event at time==ticks */
+  ti_lib_aon_rtc_compare_value_set(AON_RTC_CH0, ticks);
+  ti_lib_aon_rtc_channel_enable(AON_RTC_CH0);
+}
+/*---------------------------------------------------------------------------*/
+/* The AON RTC interrupt handler */
+void
+cc26xx_rtc_isr(void)
+{
+  ENERGEST_ON(ENERGEST_TYPE_IRQ);
+
+  if(ti_lib_aon_rtc_event_get(AON_RTC_CH0)) {
+    ti_lib_aon_rtc_event_clear(AON_RTC_CH0);
+    rtimer_run_next();
+  }
+
+  if(ti_lib_aon_rtc_event_get(AON_RTC_CH2)) {
+    ti_lib_aon_rtc_event_clear(AON_RTC_CH2);
+    clock_update();
+  }
+
+  ENERGEST_OFF(ENERGEST_TYPE_IRQ);
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

cpu/cc26xx/dev/cc26xx-rtc.h

@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-clocks CC26xx clock and timer subsystem
+ *
+ * For the CC26xx cpu we use the AON RTC as the basis for all clocks and timers
+ *
+ * We configure the AON RTC's channel 2 to run in continuous mode, generating
+ * 128 interrupts / second. In continuous mode, the next compare event is
+ * scheduled by the hardware automatically; the events are equidistant and
+ * this also means we don't need the overhead of re-scheduling within the
+ * interrupt handler
+ *
+ * For rtimers, we use the RTC's channel 0 in one-shot compare mode. When the
+ * compare event fires, we call rtimer_run_next
+ *
+ * The RTC runs in all power modes except 'shutdown'
+ *
+ * \sa cpu/cc26xx/clock.c cpu/cc26xx/rtimer-arch.c
+ * @{
+ *
+ * \defgroup cc26xx-rtc CC26xx AON RTC driver
+ *
+ * Underpins the platform's software clocks and timers
+ *
+ * @{
+ * \file
+ * Header file for the CC26XX AON RTC driver
+ */
+#ifndef CC26XX_RTC_H_
+#define CC26XX_RTC_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+
+#include "rtimer.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initialise the CC26XX AON RTC module
+ *
+ * This timer configures the AON RTC's channel 2 to run in continuous mode
+ * This function must be called before clock_init() and rtimer_init()
+ */
+void cc26xx_rtc_init(void);
+
+/**
+ * \brief Return the time of the next scheduled rtimer event
+ * \return The time at which the next rtimer event is due to fire
+ *
+ * This function will check both AON RTC channels and will only take CH0's
+ * compare into account if the channel is actually enabled
+ */
+rtimer_clock_t cc26xx_rtc_get_next_trigger(void);
+
+/**
+ * \brief Schedule an AON RTC channel 0 one-shot compare event
+ * \param t The time when the event will be fired. This is an absolute
+ *          time, in other words the event will fire AT time \e t,
+ *          not IN \e t ticks
+ */
+void cc26xx_rtc_schedule_one_shot(uint32_t t);
+/*---------------------------------------------------------------------------*/
+#endif /* CC26XX_RTC_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/cc26xx-uart.c

@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "contiki-conf.h"
+#include "cc26xx-uart.h"
+#include "hw_types.h"
+#include "hw_memmap.h"
+#include "sys_ctrl.h"
+#include "prcm.h"
+#include "ioc.h"
+#include "uart.h"
+#include "lpm.h"
+#include "ti-lib.h"
+#include "sys/energest.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/* Which events to trigger a UART interrupt */
+#define CC26XX_UART_RX_INTERRUPT_TRIGGERS (UART_INT_RX | UART_INT_RT)
+
+/* All interrupt masks */
+#define CC26XX_UART_INTERRUPT_ALL (UART_INT_OE | UART_INT_BE | UART_INT_PE | \
+                                   UART_INT_FE | UART_INT_RT | UART_INT_TX | \
+                                   UART_INT_RX | UART_INT_CTS)
+/*---------------------------------------------------------------------------*/
+#define cc26xx_uart_isr UART0IntHandler
+/*---------------------------------------------------------------------------*/
+static int (*input_handler)(unsigned char c);
+/*---------------------------------------------------------------------------*/
+static void
+power_domain_on(void)
+{
+  ti_lib_prcm_power_domain_on(PRCM_DOMAIN_SERIAL);
+  while(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_SERIAL)
+        != PRCM_DOMAIN_POWER_ON);
+}
+/*---------------------------------------------------------------------------*/
+static void
+configure_baud_rate(void)
+{
+  /*
+   * Configure the UART for 115,200, 8-N-1 operation.
+   * This function uses SysCtrlClockGet() to get the system clock
+   * frequency. This could be also be a variable or hard coded value
+   * instead of a function call.
+   */
+  ti_lib_uart_config_set_exp_clk(UART0_BASE,
+                                 ti_lib_sys_ctrl_peripheral_clock_get(
+                                   PRCM_PERIPH_UART0,
+                                   SYSCTRL_SYSBUS_ON),
+                                 CC26XX_UART_CONF_BAUD_RATE,
+                                 (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE |
+                                  UART_CONFIG_PAR_NONE));
+}
+/*---------------------------------------------------------------------------*/
+static void
+configure_registers(void)
+{
+  /*
+   * Map UART signals to the correct GPIO pins and configure them as
+   * hardware controlled.
+   */
+  ti_lib_ioc_pin_type_uart(UART0_BASE, BOARD_IOID_UART_RX, BOARD_IOID_UART_TX,
+                           BOARD_IOID_UART_CTS, BOARD_IOID_UART_RTS);
+
+  configure_baud_rate();
+
+  /*
+   * Generate an RX interrupt at FIFO 1/2 full.
+   * We don't really care about the TX interrupt
+   */
+  ti_lib_uart_fifo_level_set(UART0_BASE, UART_FIFO_TX7_8, UART_FIFO_RX4_8);
+
+  /* Configure which interrupts to generate: FIFO level or after RX timeout */
+  ti_lib_uart_int_enable(UART0_BASE, CC26XX_UART_RX_INTERRUPT_TRIGGERS);
+}
+/*---------------------------------------------------------------------------*/
+static void
+uart_on(void)
+{
+  power_domain_on();
+
+  /* Configure baud rate and enable */
+  if((HWREG(UART0_BASE + UART_O_CTL) & UART_CTL_UARTEN) == 0) {
+    configure_registers();
+
+    /* Enable UART */
+    ti_lib_uart_enable(UART0_BASE);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static uint8_t
+lpm_permit_max_pm_handler(void)
+{
+  return LPM_MODE_MAX_SUPPORTED;
+}
+/*---------------------------------------------------------------------------*/
+static void
+lpm_drop_handler(uint8_t mode)
+{
+  /* Do nothing if the PD is off */
+  if(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_SERIAL)
+     != PRCM_DOMAIN_POWER_ON) {
+    return;
+  }
+
+  /* Wait for outstanding TX to complete */
+  while(ti_lib_uart_busy(UART0_BASE));
+
+  /*
+   * Check our clock gate under Deep Sleep. If it's off, we can shut down. If
+   * it's on, this means that some other code module wants UART functionality
+   * during deep sleep, so we stay enabled
+   */
+  if((HWREG(PRCM_BASE + PRCM_O_UARTCLKGDS) & 1) == 0) {
+    ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_UART_RX);
+    ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_UART_TX);
+
+    ti_lib_uart_disable(UART0_BASE);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+lpm_wakeup_handler(void)
+{
+  uart_on();
+}
+/*---------------------------------------------------------------------------*/
+/* Declare a data structure to register with LPM. */
+LPM_MODULE(uart_module, lpm_permit_max_pm_handler,
+           lpm_drop_handler, lpm_wakeup_handler);
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_uart_init()
+{
+  /* Exit without initialising if ports are misconfigured */
+  if(BOARD_IOID_UART_RX == IOID_UNUSED ||
+     BOARD_IOID_UART_TX == IOID_UNUSED) {
+    return;
+  }
+
+  /* Enable the serial domain and wait for domain to be on */
+  power_domain_on();
+
+  /* Enable the UART clock when running and sleeping */
+  ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_UART0);
+
+  /* Apply clock settings and wait for them to take effect */
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* Disable Interrupts */
+  ti_lib_int_master_disable();
+
+  /* Make sure the peripheral is disabled */
+  ti_lib_uart_disable(UART0_BASE);
+
+  /* Disable all UART module interrupts */
+  ti_lib_uart_int_disable(UART0_BASE, CC26XX_UART_INTERRUPT_ALL);
+
+  configure_registers();
+
+  /* Acknowledge UART interrupts */
+  ti_lib_int_enable(INT_UART0);
+
+  /* Re-enable processor interrupts */
+  ti_lib_int_master_enable();
+
+  /* Enable UART */
+  ti_lib_uart_enable(UART0_BASE);
+
+  /* Register ourselves with the LPM module */
+  lpm_register_module(&uart_module);
+}
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_uart_write_byte(uint8_t c)
+{
+  if(ti_lib_prcm_power_domain_status(PRCM_DOMAIN_SERIAL)
+     != PRCM_DOMAIN_POWER_ON) {
+    return;
+  }
+
+  ti_lib_uart_char_put(UART0_BASE, c);
+}
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_uart_set_input(int (*input)(unsigned char c))
+{
+  input_handler = input;
+  return;
+}
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_uart_isr(void)
+{
+  char the_char;
+  uint32_t flags;
+
+  ENERGEST_ON(ENERGEST_TYPE_IRQ);
+
+  /* Read out the masked interrupt status */
+  flags = ti_lib_uart_int_status(UART0_BASE, true);
+
+  /* Clear all UART interrupt flags */
+  ti_lib_uart_int_clear(UART0_BASE, CC26XX_UART_INTERRUPT_ALL);
+
+  if((flags & CC26XX_UART_RX_INTERRUPT_TRIGGERS) != 0) {
+    /*
+     * If this was a FIFO RX or an RX timeout, read all bytes available in the
+     * RX FIFO.
+     */
+    while(ti_lib_uart_chars_avail(UART0_BASE)) {
+      the_char = ti_lib_uart_char_get_non_blocking(UART0_BASE);
+
+      if(input_handler != NULL) {
+        input_handler((unsigned char)the_char);
+      }
+    }
+  }
+
+  ENERGEST_OFF(ENERGEST_TYPE_IRQ);
+}

cpu/cc26xx/dev/cc26xx-uart.h

@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-uart CC26xx UARTs
+ *
+ * Driver for the CC26xx UART controller
+ * @{
+ *
+ * \file
+ * Header file for the CC26xx UART driver
+ */
+#ifndef CC26XX_UART_H_
+#define CC26XX_UART_H_
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/** \name UART functions
+ * @{
+ */
+
+/**
+ * \brief Initialises the UART controller, configures I/O control
+ * and interrupts
+ */
+void cc26xx_uart_init();
+
+/**
+ * \brief Sends a single character down the UART
+ * \param b The character to transmit
+ */
+void cc26xx_uart_write_byte(uint8_t b);
+
+/**
+ * \brief Assigns a callback to be called when the UART receives a byte
+ * \param input A pointer to the function
+ */
+void cc26xx_uart_set_input(int (*input)(unsigned char c));
+
+/** @} */
+/*---------------------------------------------------------------------------*/
+#endif /* CC26XX_UART_H_ */
+
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/contiki-watchdog.c

@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-clocks
+ * @{
+ *
+ * \defgroup cc26xx-wdt CC26xx watchdog timer driver
+ *
+ * Driver for the CC26xx Watchdog Timer
+ *
+ * This file is not called watchdog.c because the filename is in use by
+ * TI CC26xxware
+ * @{
+ *
+ * \file
+ * Implementation of the cc26xx watchdog driver.
+ */
+#include "watchdog.h"
+#include "ti-lib.h"
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initialises the CC26xx WDT
+ *
+ * Simply sets the reload counter to a default value. The WDT is not started
+ * yet. To start it, watchdog_start() must be called.
+ */
+void
+watchdog_init(void)
+{
+  ti_lib_wathdog_reload_set(0xFFFFF);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Starts the CC26xx WDT
+ */
+void
+watchdog_start(void)
+{
+  ti_lib_wathdog_reset_enable();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Refreshes the CC26xx WDT
+ */
+void
+watchdog_periodic(void)
+{
+  ti_lib_wathdog_int_clear();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Stub function to satisfy API requirements
+ */
+void
+watchdog_stop(void)
+{
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Manually trigger a WDT reboot
+ */
+void
+watchdog_reboot(void)
+{
+  watchdog_start();
+  while(1);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/gpio-interrupt.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#include "ioc.h"
+#include "gpio-interrupt.h"
+#include "sys/energest.h"
+#include "lpm.h"
+#include "ti-lib.h"
+
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+#define gpio_interrupt_isr GPIOIntHandler
+/*---------------------------------------------------------------------------*/
+/* Handler array */
+static gpio_interrupt_handler_t handlers[NUM_IO_MAX];
+/*---------------------------------------------------------------------------*/
+void
+gpio_interrupt_register_handler(uint8_t ioid, gpio_interrupt_handler_t f)
+{
+  uint8_t interrupts_disabled = ti_lib_int_master_disable();
+
+  /* Clear interrupts on specified pins */
+  ti_lib_gpio_event_clear(1 << ioid);
+
+  handlers[ioid] = f;
+
+  /* Re-enable interrupts */
+  if(!interrupts_disabled) {
+    ti_lib_int_master_enable();
+  }
+}
+/*---------------------------------------------------------------------------*/
+void
+gpio_interrupt_init()
+{
+  int i;
+
+  for(i = 0; i < NUM_IO_MAX; i++) {
+    handlers[i] = NULL;
+  }
+
+  ti_lib_int_enable(INT_EDGE_DETECT);
+}
+/*---------------------------------------------------------------------------*/
+void
+gpio_interrupt_isr(void)
+{
+  uint32_t pin_mask;
+  uint8_t i;
+
+  ENERGEST_ON(ENERGEST_TYPE_IRQ);
+
+  /* Read interrupt flags */
+  pin_mask = (HWREG(GPIO_BASE + GPIO_O_EVFLAGS31_0) & GPIO_PIN_MASK);
+
+  /* Clear the interrupt flags */
+  HWREG(GPIO_BASE + GPIO_O_EVFLAGS31_0) = pin_mask;
+
+  /* Run custom ISRs */
+  for(i = 0; i < NUM_GPIO_PINS; i++) {
+    /* Call the handler if there is one registered for this event */
+    if((pin_mask & (1 << i)) && handlers[i] != NULL) {
+      handlers[i](i);
+    }
+  }
+
+  ENERGEST_OFF(ENERGEST_TYPE_IRQ);
+}
+/*---------------------------------------------------------------------------*/
+

cpu/cc26xx/dev/gpio-interrupt.h

@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-gpio-interrupts CC26xx GPIO interrupt handling
+ *
+ * The CC26xx GPIO interrupt handler and an API which can be used by other
+ * parts of the code when they wish to be notified of a GPIO interrupt
+ *
+ * @{
+ *
+ * \file
+ * Header file for the CC26xx GPIO interrupt management
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef GPIO_INTERRUPT_H_
+#define GPIO_INTERRUPT_H_
+/*---------------------------------------------------------------------------*/
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+typedef void (*gpio_interrupt_handler_t)(uint8_t ioid);
+/*---------------------------------------------------------------------------*/
+/** \brief Initialise the GPIO interrupt handling module */
+void gpio_interrupt_init(void);
+
+/**
+ * \brief Register a GPIO interrupt handler
+ * \param f Pointer to a handler to be called when an interrupt is raised on
+ * ioid
+ * \param ioid Associate \a f with this ioid. \e ioid must be specified with
+ *        its numeric representation (0, 1, .. 31). Defines for these
+ *        numeric representations are IOID_x
+ */
+void gpio_interrupt_register_handler(uint8_t ioid, gpio_interrupt_handler_t f);
+
+#endif /* GPIO_INTERRUPT_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/dev/rfc-api/ble_cmd_field.h

@@ -0,0 +1,623 @@
+/******************************************************************************
+*  Filename:       ble_cmd_field.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    CC26xx/CC13xx API for Bluetooth Low Energy commands
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef __BLE_CMD_FIELD_H
+#define __BLE_CMD_FIELD_H
+
+#include <stdint.h>
+#include "mailbox.h"
+#include "common_cmd.h"
+
+#define _POSITION_bleRadioOp_channel                            14
+#define _TYPE_bleRadioOp_channel                                uint8_t
+#define _POSITION_bleRadioOp_whitening                          15
+#define _TYPE_bleRadioOp_whitening                              uint8_t
+#define _BITPOS_bleRadioOp_whitening_init                       0
+#define _NBITS_bleRadioOp_whitening_init                        7
+#define _BITPOS_bleRadioOp_whitening_bOverride                  7
+#define _NBITS_bleRadioOp_whitening_bOverride                   1
+#define _POSITION_bleRadioOp_pParams                            16
+#define _TYPE_bleRadioOp_pParams                                uint8_t*
+#define _POSITION_bleRadioOp_pOutput                            20
+#define _TYPE_bleRadioOp_pOutput                                uint8_t*
+#define _SIZEOF_bleRadioOp                                      24
+
+#define _SIZEOF_CMD_BLE_SLAVE                                   24
+
+#define _SIZEOF_CMD_BLE_MASTER                                  24
+
+#define _SIZEOF_CMD_BLE_ADV                                     24
+
+#define _SIZEOF_CMD_BLE_ADV_DIR                                 24
+
+#define _SIZEOF_CMD_BLE_ADV_NC                                  24
+
+#define _SIZEOF_CMD_BLE_ADV_SCAN                                24
+
+#define _SIZEOF_CMD_BLE_SCANNER                                 24
+
+#define _SIZEOF_CMD_BLE_INITIATOR                               24
+
+#define _SIZEOF_CMD_BLE_GENERIC_RX                              24
+
+#define _SIZEOF_CMD_BLE_TX_TEST                                 24
+
+#define _POSITION_CMD_BLE_ADV_PAYLOAD_payloadType               2
+#define _TYPE_CMD_BLE_ADV_PAYLOAD_payloadType                   uint8_t
+#define _POSITION_CMD_BLE_ADV_PAYLOAD_newLen                    3
+#define _TYPE_CMD_BLE_ADV_PAYLOAD_newLen                        uint8_t
+#define _POSITION_CMD_BLE_ADV_PAYLOAD_pNewData                  4
+#define _TYPE_CMD_BLE_ADV_PAYLOAD_pNewData                      uint8_t*
+#define _POSITION_CMD_BLE_ADV_PAYLOAD_pParams                   8
+#define _TYPE_CMD_BLE_ADV_PAYLOAD_pParams                       uint8_t*
+#define _SIZEOF_CMD_BLE_ADV_PAYLOAD                             12
+
+#define _POSITION_bleMasterSlavePar_pRxQ                        0
+#define _TYPE_bleMasterSlavePar_pRxQ                            dataQueue_t*
+#define _POSITION_bleMasterSlavePar_pTxQ                        4
+#define _TYPE_bleMasterSlavePar_pTxQ                            dataQueue_t*
+#define _POSITION_bleMasterSlavePar_rxConfig                    8
+#define _TYPE_bleMasterSlavePar_rxConfig                        uint8_t
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAutoFlushIgnored    0
+#define _NBITS_bleMasterSlavePar_rxConfig_bAutoFlushIgnored     1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAutoFlushCrcErr     1
+#define _NBITS_bleMasterSlavePar_rxConfig_bAutoFlushCrcErr      1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAutoFlushEmpty      2
+#define _NBITS_bleMasterSlavePar_rxConfig_bAutoFlushEmpty       1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bIncludeLenByte      3
+#define _NBITS_bleMasterSlavePar_rxConfig_bIncludeLenByte       1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bIncludeCrc          4
+#define _NBITS_bleMasterSlavePar_rxConfig_bIncludeCrc           1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAppendRssi          5
+#define _NBITS_bleMasterSlavePar_rxConfig_bAppendRssi           1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAppendStatus        6
+#define _NBITS_bleMasterSlavePar_rxConfig_bAppendStatus         1
+#define _BITPOS_bleMasterSlavePar_rxConfig_bAppendTimestamp     7
+#define _NBITS_bleMasterSlavePar_rxConfig_bAppendTimestamp      1
+#define _POSITION_bleMasterSlavePar_seqStat                     9
+#define _TYPE_bleMasterSlavePar_seqStat                         uint8_t
+#define _BITPOS_bleMasterSlavePar_seqStat_lastRxSn              0
+#define _NBITS_bleMasterSlavePar_seqStat_lastRxSn               1
+#define _BITPOS_bleMasterSlavePar_seqStat_lastTxSn              1
+#define _NBITS_bleMasterSlavePar_seqStat_lastTxSn               1
+#define _BITPOS_bleMasterSlavePar_seqStat_nextTxSn              2
+#define _NBITS_bleMasterSlavePar_seqStat_nextTxSn               1
+#define _BITPOS_bleMasterSlavePar_seqStat_bFirstPkt             3
+#define _NBITS_bleMasterSlavePar_seqStat_bFirstPkt              1
+#define _BITPOS_bleMasterSlavePar_seqStat_bAutoEmpty            4
+#define _NBITS_bleMasterSlavePar_seqStat_bAutoEmpty             1
+#define _BITPOS_bleMasterSlavePar_seqStat_bLlCtrlTx             5
+#define _NBITS_bleMasterSlavePar_seqStat_bLlCtrlTx              1
+#define _BITPOS_bleMasterSlavePar_seqStat_bLlCtrlAckRx          6
+#define _NBITS_bleMasterSlavePar_seqStat_bLlCtrlAckRx           1
+#define _BITPOS_bleMasterSlavePar_seqStat_bLlCtrlAckPending     7
+#define _NBITS_bleMasterSlavePar_seqStat_bLlCtrlAckPending      1
+#define _POSITION_bleMasterSlavePar_maxNack                     10
+#define _TYPE_bleMasterSlavePar_maxNack                         uint8_t
+#define _POSITION_bleMasterSlavePar_maxPkt                      11
+#define _TYPE_bleMasterSlavePar_maxPkt                          uint8_t
+#define _POSITION_bleMasterSlavePar_accessAddress               12
+#define _TYPE_bleMasterSlavePar_accessAddress                   uint32_t
+#define _POSITION_bleMasterSlavePar_crcInit0                    16
+#define _TYPE_bleMasterSlavePar_crcInit0                        uint8_t
+#define _POSITION_bleMasterSlavePar_crcInit1                    17
+#define _TYPE_bleMasterSlavePar_crcInit1                        uint8_t
+#define _POSITION_bleMasterSlavePar_crcInit2                    18
+#define _TYPE_bleMasterSlavePar_crcInit2                        uint8_t
+#define _POSITION_bleMasterSlavePar_crcInit                     16
+#define _TYPE_bleMasterSlavePar_crcInit                         uint32_t
+#define _SIZEOF_bleMasterSlavePar                               20
+
+#define _POSITION_bleMasterPar_endTrigger                       19
+#define _TYPE_bleMasterPar_endTrigger                           uint8_t
+#define _BITPOS_bleMasterPar_endTrigger_triggerType             0
+#define _NBITS_bleMasterPar_endTrigger_triggerType              4
+#define _BITPOS_bleMasterPar_endTrigger_bEnaCmd                 4
+#define _NBITS_bleMasterPar_endTrigger_bEnaCmd                  1
+#define _BITPOS_bleMasterPar_endTrigger_triggerNo               5
+#define _NBITS_bleMasterPar_endTrigger_triggerNo                2
+#define _BITPOS_bleMasterPar_endTrigger_pastTrig                7
+#define _NBITS_bleMasterPar_endTrigger_pastTrig                 1
+#define _POSITION_bleMasterPar_endTime                          20
+#define _TYPE_bleMasterPar_endTime                              ratmr_t
+#define _SIZEOF_bleMasterPar                                    24
+
+#define _POSITION_bleSlavePar_timeoutTrigger                    19
+#define _TYPE_bleSlavePar_timeoutTrigger                        uint8_t
+#define _BITPOS_bleSlavePar_timeoutTrigger_triggerType          0
+#define _NBITS_bleSlavePar_timeoutTrigger_triggerType           4
+#define _BITPOS_bleSlavePar_timeoutTrigger_bEnaCmd              4
+#define _NBITS_bleSlavePar_timeoutTrigger_bEnaCmd               1
+#define _BITPOS_bleSlavePar_timeoutTrigger_triggerNo            5
+#define _NBITS_bleSlavePar_timeoutTrigger_triggerNo             2
+#define _BITPOS_bleSlavePar_timeoutTrigger_pastTrig             7
+#define _NBITS_bleSlavePar_timeoutTrigger_pastTrig              1
+#define _POSITION_bleSlavePar_timeoutTime                       20
+#define _TYPE_bleSlavePar_timeoutTime                           ratmr_t
+#define _POSITION_bleSlavePar_endTrigger                        27
+#define _TYPE_bleSlavePar_endTrigger                            uint8_t
+#define _BITPOS_bleSlavePar_endTrigger_triggerType              0
+#define _NBITS_bleSlavePar_endTrigger_triggerType               4
+#define _BITPOS_bleSlavePar_endTrigger_bEnaCmd                  4
+#define _NBITS_bleSlavePar_endTrigger_bEnaCmd                   1
+#define _BITPOS_bleSlavePar_endTrigger_triggerNo                5
+#define _NBITS_bleSlavePar_endTrigger_triggerNo                 2
+#define _BITPOS_bleSlavePar_endTrigger_pastTrig                 7
+#define _NBITS_bleSlavePar_endTrigger_pastTrig                  1
+#define _POSITION_bleSlavePar_endTime                           28
+#define _TYPE_bleSlavePar_endTime                               ratmr_t
+#define _SIZEOF_bleSlavePar                                     32
+
+#define _POSITION_bleAdvPar_pRxQ                                0
+#define _TYPE_bleAdvPar_pRxQ                                    dataQueue_t*
+#define _POSITION_bleAdvPar_rxConfig                            4
+#define _TYPE_bleAdvPar_rxConfig                                uint8_t
+#define _BITPOS_bleAdvPar_rxConfig_bAutoFlushIgnored            0
+#define _NBITS_bleAdvPar_rxConfig_bAutoFlushIgnored             1
+#define _BITPOS_bleAdvPar_rxConfig_bAutoFlushCrcErr             1
+#define _NBITS_bleAdvPar_rxConfig_bAutoFlushCrcErr              1
+#define _BITPOS_bleAdvPar_rxConfig_bAutoFlushEmpty              2
+#define _NBITS_bleAdvPar_rxConfig_bAutoFlushEmpty               1
+#define _BITPOS_bleAdvPar_rxConfig_bIncludeLenByte              3
+#define _NBITS_bleAdvPar_rxConfig_bIncludeLenByte               1
+#define _BITPOS_bleAdvPar_rxConfig_bIncludeCrc                  4
+#define _NBITS_bleAdvPar_rxConfig_bIncludeCrc                   1
+#define _BITPOS_bleAdvPar_rxConfig_bAppendRssi                  5
+#define _NBITS_bleAdvPar_rxConfig_bAppendRssi                   1
+#define _BITPOS_bleAdvPar_rxConfig_bAppendStatus                6
+#define _NBITS_bleAdvPar_rxConfig_bAppendStatus                 1
+#define _BITPOS_bleAdvPar_rxConfig_bAppendTimestamp             7
+#define _NBITS_bleAdvPar_rxConfig_bAppendTimestamp              1
+#define _POSITION_bleAdvPar_advConfig                           5
+#define _TYPE_bleAdvPar_advConfig                               uint8_t
+#define _BITPOS_bleAdvPar_advConfig_advFilterPolicy             0
+#define _NBITS_bleAdvPar_advConfig_advFilterPolicy              2
+#define _BITPOS_bleAdvPar_advConfig_deviceAddrType              2
+#define _NBITS_bleAdvPar_advConfig_deviceAddrType               1
+#define _BITPOS_bleAdvPar_advConfig_peerAddrType                3
+#define _NBITS_bleAdvPar_advConfig_peerAddrType                 1
+#define _BITPOS_bleAdvPar_advConfig_bStrictLenFilter            4
+#define _NBITS_bleAdvPar_advConfig_bStrictLenFilter             1
+#define _POSITION_bleAdvPar_advLen                              6
+#define _TYPE_bleAdvPar_advLen                                  uint8_t
+#define _POSITION_bleAdvPar_scanRspLen                          7
+#define _TYPE_bleAdvPar_scanRspLen                              uint8_t
+#define _POSITION_bleAdvPar_pAdvData                            8
+#define _TYPE_bleAdvPar_pAdvData                                uint8_t*
+#define _POSITION_bleAdvPar_pScanRspData                        12
+#define _TYPE_bleAdvPar_pScanRspData                            uint8_t*
+#define _POSITION_bleAdvPar_pDeviceAddress                      16
+#define _TYPE_bleAdvPar_pDeviceAddress                          uint16_t*
+#define _POSITION_bleAdvPar_pWhiteList                          20
+#define _TYPE_bleAdvPar_pWhiteList                              uint32_t*
+#define _POSITION_bleAdvPar_endTrigger                          27
+#define _TYPE_bleAdvPar_endTrigger                              uint8_t
+#define _BITPOS_bleAdvPar_endTrigger_triggerType                0
+#define _NBITS_bleAdvPar_endTrigger_triggerType                 4
+#define _BITPOS_bleAdvPar_endTrigger_bEnaCmd                    4
+#define _NBITS_bleAdvPar_endTrigger_bEnaCmd                     1
+#define _BITPOS_bleAdvPar_endTrigger_triggerNo                  5
+#define _NBITS_bleAdvPar_endTrigger_triggerNo                   2
+#define _BITPOS_bleAdvPar_endTrigger_pastTrig                   7
+#define _NBITS_bleAdvPar_endTrigger_pastTrig                    1
+#define _POSITION_bleAdvPar_endTime                             28
+#define _TYPE_bleAdvPar_endTime                                 ratmr_t
+#define _SIZEOF_bleAdvPar                                       32
+
+#define _POSITION_bleScannerPar_pRxQ                            0
+#define _TYPE_bleScannerPar_pRxQ                                dataQueue_t*
+#define _POSITION_bleScannerPar_rxConfig                        4
+#define _TYPE_bleScannerPar_rxConfig                            uint8_t
+#define _BITPOS_bleScannerPar_rxConfig_bAutoFlushIgnored        0
+#define _NBITS_bleScannerPar_rxConfig_bAutoFlushIgnored         1
+#define _BITPOS_bleScannerPar_rxConfig_bAutoFlushCrcErr         1
+#define _NBITS_bleScannerPar_rxConfig_bAutoFlushCrcErr          1
+#define _BITPOS_bleScannerPar_rxConfig_bAutoFlushEmpty          2
+#define _NBITS_bleScannerPar_rxConfig_bAutoFlushEmpty           1
+#define _BITPOS_bleScannerPar_rxConfig_bIncludeLenByte          3
+#define _NBITS_bleScannerPar_rxConfig_bIncludeLenByte           1
+#define _BITPOS_bleScannerPar_rxConfig_bIncludeCrc              4
+#define _NBITS_bleScannerPar_rxConfig_bIncludeCrc               1
+#define _BITPOS_bleScannerPar_rxConfig_bAppendRssi              5
+#define _NBITS_bleScannerPar_rxConfig_bAppendRssi               1
+#define _BITPOS_bleScannerPar_rxConfig_bAppendStatus            6
+#define _NBITS_bleScannerPar_rxConfig_bAppendStatus             1
+#define _BITPOS_bleScannerPar_rxConfig_bAppendTimestamp         7
+#define _NBITS_bleScannerPar_rxConfig_bAppendTimestamp          1
+#define _POSITION_bleScannerPar_scanConfig                      5
+#define _TYPE_bleScannerPar_scanConfig                          uint8_t
+#define _BITPOS_bleScannerPar_scanConfig_scanFilterPolicy       0
+#define _NBITS_bleScannerPar_scanConfig_scanFilterPolicy        1
+#define _BITPOS_bleScannerPar_scanConfig_bActiveScan            1
+#define _NBITS_bleScannerPar_scanConfig_bActiveScan             1
+#define _BITPOS_bleScannerPar_scanConfig_deviceAddrType         2
+#define _NBITS_bleScannerPar_scanConfig_deviceAddrType          1
+#define _BITPOS_bleScannerPar_scanConfig_bStrictLenFilter       4
+#define _NBITS_bleScannerPar_scanConfig_bStrictLenFilter        1
+#define _BITPOS_bleScannerPar_scanConfig_bAutoWlIgnore          5
+#define _NBITS_bleScannerPar_scanConfig_bAutoWlIgnore           1
+#define _BITPOS_bleScannerPar_scanConfig_bEndOnRpt              6
+#define _NBITS_bleScannerPar_scanConfig_bEndOnRpt               1
+#define _POSITION_bleScannerPar_randomState                     6
+#define _TYPE_bleScannerPar_randomState                         uint16_t
+#define _POSITION_bleScannerPar_backoffCount                    8
+#define _TYPE_bleScannerPar_backoffCount                        uint16_t
+#define _POSITION_bleScannerPar_backoffPar                      10
+#define _TYPE_bleScannerPar_backoffPar                          uint8_t
+#define _BITPOS_bleScannerPar_backoffPar_logUpperLimit          0
+#define _NBITS_bleScannerPar_backoffPar_logUpperLimit           4
+#define _BITPOS_bleScannerPar_backoffPar_bLastSucceeded         4
+#define _NBITS_bleScannerPar_backoffPar_bLastSucceeded          1
+#define _BITPOS_bleScannerPar_backoffPar_bLastFailed            5
+#define _NBITS_bleScannerPar_backoffPar_bLastFailed             1
+#define _POSITION_bleScannerPar_scanReqLen                      11
+#define _TYPE_bleScannerPar_scanReqLen                          uint8_t
+#define _POSITION_bleScannerPar_pScanReqData                    12
+#define _TYPE_bleScannerPar_pScanReqData                        uint8_t*
+#define _POSITION_bleScannerPar_pDeviceAddress                  16
+#define _TYPE_bleScannerPar_pDeviceAddress                      uint16_t*
+#define _POSITION_bleScannerPar_pWhiteList                      20
+#define _TYPE_bleScannerPar_pWhiteList                          uint32_t*
+#define _POSITION_bleScannerPar_timeoutTrigger                  26
+#define _TYPE_bleScannerPar_timeoutTrigger                      uint8_t
+#define _BITPOS_bleScannerPar_timeoutTrigger_triggerType        0
+#define _NBITS_bleScannerPar_timeoutTrigger_triggerType         4
+#define _BITPOS_bleScannerPar_timeoutTrigger_bEnaCmd            4
+#define _NBITS_bleScannerPar_timeoutTrigger_bEnaCmd             1
+#define _BITPOS_bleScannerPar_timeoutTrigger_triggerNo          5
+#define _NBITS_bleScannerPar_timeoutTrigger_triggerNo           2
+#define _BITPOS_bleScannerPar_timeoutTrigger_pastTrig           7
+#define _NBITS_bleScannerPar_timeoutTrigger_pastTrig            1
+#define _POSITION_bleScannerPar_endTrigger                      27
+#define _TYPE_bleScannerPar_endTrigger                          uint8_t
+#define _BITPOS_bleScannerPar_endTrigger_triggerType            0
+#define _NBITS_bleScannerPar_endTrigger_triggerType             4
+#define _BITPOS_bleScannerPar_endTrigger_bEnaCmd                4
+#define _NBITS_bleScannerPar_endTrigger_bEnaCmd                 1
+#define _BITPOS_bleScannerPar_endTrigger_triggerNo              5
+#define _NBITS_bleScannerPar_endTrigger_triggerNo               2
+#define _BITPOS_bleScannerPar_endTrigger_pastTrig               7
+#define _NBITS_bleScannerPar_endTrigger_pastTrig                1
+#define _POSITION_bleScannerPar_timeoutTime                     28
+#define _TYPE_bleScannerPar_timeoutTime                         ratmr_t
+#define _POSITION_bleScannerPar_endTime                         32
+#define _TYPE_bleScannerPar_endTime                             ratmr_t
+#define _SIZEOF_bleScannerPar                                   36
+
+#define _POSITION_bleInitiatorPar_pRxQ                          0
+#define _TYPE_bleInitiatorPar_pRxQ                              dataQueue_t*
+#define _POSITION_bleInitiatorPar_rxConfig                      4
+#define _TYPE_bleInitiatorPar_rxConfig                          uint8_t
+#define _BITPOS_bleInitiatorPar_rxConfig_bAutoFlushIgnored      0
+#define _NBITS_bleInitiatorPar_rxConfig_bAutoFlushIgnored       1
+#define _BITPOS_bleInitiatorPar_rxConfig_bAutoFlushCrcErr       1
+#define _NBITS_bleInitiatorPar_rxConfig_bAutoFlushCrcErr        1
+#define _BITPOS_bleInitiatorPar_rxConfig_bAutoFlushEmpty        2
+#define _NBITS_bleInitiatorPar_rxConfig_bAutoFlushEmpty         1
+#define _BITPOS_bleInitiatorPar_rxConfig_bIncludeLenByte        3
+#define _NBITS_bleInitiatorPar_rxConfig_bIncludeLenByte         1
+#define _BITPOS_bleInitiatorPar_rxConfig_bIncludeCrc            4
+#define _NBITS_bleInitiatorPar_rxConfig_bIncludeCrc             1
+#define _BITPOS_bleInitiatorPar_rxConfig_bAppendRssi            5
+#define _NBITS_bleInitiatorPar_rxConfig_bAppendRssi             1
+#define _BITPOS_bleInitiatorPar_rxConfig_bAppendStatus          6
+#define _NBITS_bleInitiatorPar_rxConfig_bAppendStatus           1
+#define _BITPOS_bleInitiatorPar_rxConfig_bAppendTimestamp       7
+#define _NBITS_bleInitiatorPar_rxConfig_bAppendTimestamp        1
+#define _POSITION_bleInitiatorPar_initConfig                    5
+#define _TYPE_bleInitiatorPar_initConfig                        uint8_t
+#define _BITPOS_bleInitiatorPar_initConfig_bUseWhiteList        0
+#define _NBITS_bleInitiatorPar_initConfig_bUseWhiteList         1
+#define _BITPOS_bleInitiatorPar_initConfig_bDynamicWinOffset    1
+#define _NBITS_bleInitiatorPar_initConfig_bDynamicWinOffset     1
+#define _BITPOS_bleInitiatorPar_initConfig_deviceAddrType       2
+#define _NBITS_bleInitiatorPar_initConfig_deviceAddrType        1
+#define _BITPOS_bleInitiatorPar_initConfig_peerAddrType         3
+#define _NBITS_bleInitiatorPar_initConfig_peerAddrType          1
+#define _BITPOS_bleInitiatorPar_initConfig_bStrictLenFilter     4
+#define _NBITS_bleInitiatorPar_initConfig_bStrictLenFilter      1
+#define _POSITION_bleInitiatorPar_connectReqLen                 7
+#define _TYPE_bleInitiatorPar_connectReqLen                     uint8_t
+#define _POSITION_bleInitiatorPar_pConnectReqData               8
+#define _TYPE_bleInitiatorPar_pConnectReqData                   uint8_t*
+#define _POSITION_bleInitiatorPar_pDeviceAddress                12
+#define _TYPE_bleInitiatorPar_pDeviceAddress                    uint16_t*
+#define _POSITION_bleInitiatorPar_pWhiteList                    16
+#define _TYPE_bleInitiatorPar_pWhiteList                        uint32_t*
+#define _POSITION_bleInitiatorPar_connectTime                   20
+#define _TYPE_bleInitiatorPar_connectTime                       ratmr_t
+#define _POSITION_bleInitiatorPar_timeoutTrigger                26
+#define _TYPE_bleInitiatorPar_timeoutTrigger                    uint8_t
+#define _BITPOS_bleInitiatorPar_timeoutTrigger_triggerType      0
+#define _NBITS_bleInitiatorPar_timeoutTrigger_triggerType       4
+#define _BITPOS_bleInitiatorPar_timeoutTrigger_bEnaCmd          4
+#define _NBITS_bleInitiatorPar_timeoutTrigger_bEnaCmd           1
+#define _BITPOS_bleInitiatorPar_timeoutTrigger_triggerNo        5
+#define _NBITS_bleInitiatorPar_timeoutTrigger_triggerNo         2
+#define _BITPOS_bleInitiatorPar_timeoutTrigger_pastTrig         7
+#define _NBITS_bleInitiatorPar_timeoutTrigger_pastTrig          1
+#define _POSITION_bleInitiatorPar_endTrigger                    27
+#define _TYPE_bleInitiatorPar_endTrigger                        uint8_t
+#define _BITPOS_bleInitiatorPar_endTrigger_triggerType          0
+#define _NBITS_bleInitiatorPar_endTrigger_triggerType           4
+#define _BITPOS_bleInitiatorPar_endTrigger_bEnaCmd              4
+#define _NBITS_bleInitiatorPar_endTrigger_bEnaCmd               1
+#define _BITPOS_bleInitiatorPar_endTrigger_triggerNo            5
+#define _NBITS_bleInitiatorPar_endTrigger_triggerNo             2
+#define _BITPOS_bleInitiatorPar_endTrigger_pastTrig             7
+#define _NBITS_bleInitiatorPar_endTrigger_pastTrig              1
+#define _POSITION_bleInitiatorPar_timeoutTime                   28
+#define _TYPE_bleInitiatorPar_timeoutTime                       ratmr_t
+#define _POSITION_bleInitiatorPar_endTime                       32
+#define _TYPE_bleInitiatorPar_endTime                           ratmr_t
+#define _SIZEOF_bleInitiatorPar                                 36
+
+#define _POSITION_bleGenericRxPar_pRxQ                          0
+#define _TYPE_bleGenericRxPar_pRxQ                              dataQueue_t*
+#define _POSITION_bleGenericRxPar_rxConfig                      4
+#define _TYPE_bleGenericRxPar_rxConfig                          uint8_t
+#define _BITPOS_bleGenericRxPar_rxConfig_bAutoFlushIgnored      0
+#define _NBITS_bleGenericRxPar_rxConfig_bAutoFlushIgnored       1
+#define _BITPOS_bleGenericRxPar_rxConfig_bAutoFlushCrcErr       1
+#define _NBITS_bleGenericRxPar_rxConfig_bAutoFlushCrcErr        1
+#define _BITPOS_bleGenericRxPar_rxConfig_bAutoFlushEmpty        2
+#define _NBITS_bleGenericRxPar_rxConfig_bAutoFlushEmpty         1
+#define _BITPOS_bleGenericRxPar_rxConfig_bIncludeLenByte        3
+#define _NBITS_bleGenericRxPar_rxConfig_bIncludeLenByte         1
+#define _BITPOS_bleGenericRxPar_rxConfig_bIncludeCrc            4
+#define _NBITS_bleGenericRxPar_rxConfig_bIncludeCrc             1
+#define _BITPOS_bleGenericRxPar_rxConfig_bAppendRssi            5
+#define _NBITS_bleGenericRxPar_rxConfig_bAppendRssi             1
+#define _BITPOS_bleGenericRxPar_rxConfig_bAppendStatus          6
+#define _NBITS_bleGenericRxPar_rxConfig_bAppendStatus           1
+#define _BITPOS_bleGenericRxPar_rxConfig_bAppendTimestamp       7
+#define _NBITS_bleGenericRxPar_rxConfig_bAppendTimestamp        1
+#define _POSITION_bleGenericRxPar_bRepeat                       5
+#define _TYPE_bleGenericRxPar_bRepeat                           uint8_t
+#define _POSITION_bleGenericRxPar_accessAddress                 8
+#define _TYPE_bleGenericRxPar_accessAddress                     uint32_t
+#define _POSITION_bleGenericRxPar_crcInit0                      12
+#define _TYPE_bleGenericRxPar_crcInit0                          uint8_t
+#define _POSITION_bleGenericRxPar_crcInit1                      13
+#define _TYPE_bleGenericRxPar_crcInit1                          uint8_t
+#define _POSITION_bleGenericRxPar_crcInit2                      14
+#define _TYPE_bleGenericRxPar_crcInit2                          uint8_t
+#define _POSITION_bleGenericRxPar_crcInit                       12
+#define _TYPE_bleGenericRxPar_crcInit                           uint32_t
+#define _POSITION_bleGenericRxPar_endTrigger                    15
+#define _TYPE_bleGenericRxPar_endTrigger                        uint8_t
+#define _BITPOS_bleGenericRxPar_endTrigger_triggerType          0
+#define _NBITS_bleGenericRxPar_endTrigger_triggerType           4
+#define _BITPOS_bleGenericRxPar_endTrigger_bEnaCmd              4
+#define _NBITS_bleGenericRxPar_endTrigger_bEnaCmd               1
+#define _BITPOS_bleGenericRxPar_endTrigger_triggerNo            5
+#define _NBITS_bleGenericRxPar_endTrigger_triggerNo             2
+#define _BITPOS_bleGenericRxPar_endTrigger_pastTrig             7
+#define _NBITS_bleGenericRxPar_endTrigger_pastTrig              1
+#define _POSITION_bleGenericRxPar_endTime                       16
+#define _TYPE_bleGenericRxPar_endTime                           ratmr_t
+#define _SIZEOF_bleGenericRxPar                                 20
+
+#define _POSITION_bleTxTestPar_numPackets                       0
+#define _TYPE_bleTxTestPar_numPackets                           uint16_t
+#define _POSITION_bleTxTestPar_payloadLength                    2
+#define _TYPE_bleTxTestPar_payloadLength                        uint8_t
+#define _POSITION_bleTxTestPar_packetType                       3
+#define _TYPE_bleTxTestPar_packetType                           uint8_t
+#define _POSITION_bleTxTestPar_period                           4
+#define _TYPE_bleTxTestPar_period                               ratmr_t
+#define _POSITION_bleTxTestPar_config                           8
+#define _TYPE_bleTxTestPar_config                               uint8_t
+#define _BITPOS_bleTxTestPar_config_bOverrideDefault            0
+#define _NBITS_bleTxTestPar_config_bOverrideDefault             1
+#define _BITPOS_bleTxTestPar_config_bUsePrbs9                   1
+#define _NBITS_bleTxTestPar_config_bUsePrbs9                    1
+#define _BITPOS_bleTxTestPar_config_bUsePrbs15                  2
+#define _NBITS_bleTxTestPar_config_bUsePrbs15                   1
+#define _POSITION_bleTxTestPar_byteVal                          9
+#define _TYPE_bleTxTestPar_byteVal                              uint8_t
+#define _POSITION_bleTxTestPar_endTrigger                       11
+#define _TYPE_bleTxTestPar_endTrigger                           uint8_t
+#define _BITPOS_bleTxTestPar_endTrigger_triggerType             0
+#define _NBITS_bleTxTestPar_endTrigger_triggerType              4
+#define _BITPOS_bleTxTestPar_endTrigger_bEnaCmd                 4
+#define _NBITS_bleTxTestPar_endTrigger_bEnaCmd                  1
+#define _BITPOS_bleTxTestPar_endTrigger_triggerNo               5
+#define _NBITS_bleTxTestPar_endTrigger_triggerNo                2
+#define _BITPOS_bleTxTestPar_endTrigger_pastTrig                7
+#define _NBITS_bleTxTestPar_endTrigger_pastTrig                 1
+#define _POSITION_bleTxTestPar_endTime                          12
+#define _TYPE_bleTxTestPar_endTime                              ratmr_t
+#define _SIZEOF_bleTxTestPar                                    16
+
+#define _POSITION_bleMasterSlaveOutput_nTx                      0
+#define _TYPE_bleMasterSlaveOutput_nTx                          uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxAck                   1
+#define _TYPE_bleMasterSlaveOutput_nTxAck                       uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxCtrl                  2
+#define _TYPE_bleMasterSlaveOutput_nTxCtrl                      uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxCtrlAck               3
+#define _TYPE_bleMasterSlaveOutput_nTxCtrlAck                   uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxCtrlAckAck            4
+#define _TYPE_bleMasterSlaveOutput_nTxCtrlAckAck                uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxRetrans               5
+#define _TYPE_bleMasterSlaveOutput_nTxRetrans                   uint8_t
+#define _POSITION_bleMasterSlaveOutput_nTxEntryDone             6
+#define _TYPE_bleMasterSlaveOutput_nTxEntryDone                 uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxOk                    7
+#define _TYPE_bleMasterSlaveOutput_nRxOk                        uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxCtrl                  8
+#define _TYPE_bleMasterSlaveOutput_nRxCtrl                      uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxCtrlAck               9
+#define _TYPE_bleMasterSlaveOutput_nRxCtrlAck                   uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxNok                   10
+#define _TYPE_bleMasterSlaveOutput_nRxNok                       uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxIgnored               11
+#define _TYPE_bleMasterSlaveOutput_nRxIgnored                   uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxEmpty                 12
+#define _TYPE_bleMasterSlaveOutput_nRxEmpty                     uint8_t
+#define _POSITION_bleMasterSlaveOutput_nRxBufFull               13
+#define _TYPE_bleMasterSlaveOutput_nRxBufFull                   uint8_t
+#define _POSITION_bleMasterSlaveOutput_lastRssi                 14
+#define _TYPE_bleMasterSlaveOutput_lastRssi                     int8_t
+#define _POSITION_bleMasterSlaveOutput_pktStatus                15
+#define _TYPE_bleMasterSlaveOutput_pktStatus                    uint8_t
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bTimeStampValid  0
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bTimeStampValid   1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastCrcErr      1
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastCrcErr       1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastIgnored     2
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastIgnored      1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastEmpty       3
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastEmpty        1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastCtrl        4
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastCtrl         1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastMd          5
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastMd           1
+#define _BITPOS_bleMasterSlaveOutput_pktStatus_bLastAck         6
+#define _NBITS_bleMasterSlaveOutput_pktStatus_bLastAck          1
+#define _POSITION_bleMasterSlaveOutput_timeStamp                16
+#define _TYPE_bleMasterSlaveOutput_timeStamp                    ratmr_t
+#define _SIZEOF_bleMasterSlaveOutput                            20
+
+#define _POSITION_bleAdvOutput_nTxAdvInd                        0
+#define _TYPE_bleAdvOutput_nTxAdvInd                            uint16_t
+#define _POSITION_bleAdvOutput_nTxScanRsp                       2
+#define _TYPE_bleAdvOutput_nTxScanRsp                           uint8_t
+#define _POSITION_bleAdvOutput_nRxScanReq                       3
+#define _TYPE_bleAdvOutput_nRxScanReq                           uint8_t
+#define _POSITION_bleAdvOutput_nRxConnectReq                    4
+#define _TYPE_bleAdvOutput_nRxConnectReq                        uint8_t
+#define _POSITION_bleAdvOutput_nRxNok                           6
+#define _TYPE_bleAdvOutput_nRxNok                               uint16_t
+#define _POSITION_bleAdvOutput_nRxIgnored                       8
+#define _TYPE_bleAdvOutput_nRxIgnored                           uint16_t
+#define _POSITION_bleAdvOutput_nRxBufFull                       10
+#define _TYPE_bleAdvOutput_nRxBufFull                           uint8_t
+#define _POSITION_bleAdvOutput_lastRssi                         11
+#define _TYPE_bleAdvOutput_lastRssi                             int8_t
+#define _POSITION_bleAdvOutput_timeStamp                        12
+#define _TYPE_bleAdvOutput_timeStamp                            ratmr_t
+#define _SIZEOF_bleAdvOutput                                    16
+
+#define _POSITION_bleScannerOutput_nTxScanReq                   0
+#define _TYPE_bleScannerOutput_nTxScanReq                       uint16_t
+#define _POSITION_bleScannerOutput_nBackedOffScanReq            2
+#define _TYPE_bleScannerOutput_nBackedOffScanReq                uint16_t
+#define _POSITION_bleScannerOutput_nRxAdvOk                     4
+#define _TYPE_bleScannerOutput_nRxAdvOk                         uint16_t
+#define _POSITION_bleScannerOutput_nRxAdvIgnored                6
+#define _TYPE_bleScannerOutput_nRxAdvIgnored                    uint16_t
+#define _POSITION_bleScannerOutput_nRxAdvNok                    8
+#define _TYPE_bleScannerOutput_nRxAdvNok                        uint16_t
+#define _POSITION_bleScannerOutput_nRxScanRspOk                 10
+#define _TYPE_bleScannerOutput_nRxScanRspOk                     uint16_t
+#define _POSITION_bleScannerOutput_nRxScanRspIgnored            12
+#define _TYPE_bleScannerOutput_nRxScanRspIgnored                uint16_t
+#define _POSITION_bleScannerOutput_nRxScanRspNok                14
+#define _TYPE_bleScannerOutput_nRxScanRspNok                    uint16_t
+#define _POSITION_bleScannerOutput_nRxAdvBufFull                16
+#define _TYPE_bleScannerOutput_nRxAdvBufFull                    uint8_t
+#define _POSITION_bleScannerOutput_nRxScanRspBufFull            17
+#define _TYPE_bleScannerOutput_nRxScanRspBufFull                uint8_t
+#define _POSITION_bleScannerOutput_lastRssi                     18
+#define _TYPE_bleScannerOutput_lastRssi                         int8_t
+#define _POSITION_bleScannerOutput_timeStamp                    20
+#define _TYPE_bleScannerOutput_timeStamp                        ratmr_t
+#define _SIZEOF_bleScannerOutput                                24
+
+#define _POSITION_bleInitiatorOutput_nTxConnectReq              0
+#define _TYPE_bleInitiatorOutput_nTxConnectReq                  uint8_t
+#define _POSITION_bleInitiatorOutput_nRxAdvOk                   1
+#define _TYPE_bleInitiatorOutput_nRxAdvOk                       uint8_t
+#define _POSITION_bleInitiatorOutput_nRxAdvIgnored              2
+#define _TYPE_bleInitiatorOutput_nRxAdvIgnored                  uint16_t
+#define _POSITION_bleInitiatorOutput_nRxAdvNok                  4
+#define _TYPE_bleInitiatorOutput_nRxAdvNok                      uint16_t
+#define _POSITION_bleInitiatorOutput_nRxAdvBufFull              6
+#define _TYPE_bleInitiatorOutput_nRxAdvBufFull                  uint8_t
+#define _POSITION_bleInitiatorOutput_lastRssi                   7
+#define _TYPE_bleInitiatorOutput_lastRssi                       int8_t
+#define _POSITION_bleInitiatorOutput_timeStamp                  8
+#define _TYPE_bleInitiatorOutput_timeStamp                      ratmr_t
+#define _SIZEOF_bleInitiatorOutput                              12
+
+#define _POSITION_bleGenericRxOutput_nRxOk                      0
+#define _TYPE_bleGenericRxOutput_nRxOk                          uint16_t
+#define _POSITION_bleGenericRxOutput_nRxNok                     2
+#define _TYPE_bleGenericRxOutput_nRxNok                         uint16_t
+#define _POSITION_bleGenericRxOutput_nRxBufFull                 4
+#define _TYPE_bleGenericRxOutput_nRxBufFull                     uint16_t
+#define _POSITION_bleGenericRxOutput_lastRssi                   6
+#define _TYPE_bleGenericRxOutput_lastRssi                       int8_t
+#define _POSITION_bleGenericRxOutput_timeStamp                  8
+#define _TYPE_bleGenericRxOutput_timeStamp                      ratmr_t
+#define _SIZEOF_bleGenericRxOutput                              12
+
+#define _POSITION_bleTxTestOutput_nTx                           0
+#define _TYPE_bleTxTestOutput_nTx                               uint16_t
+#define _SIZEOF_bleTxTestOutput                                 2
+
+#define _POSITION_bleWhiteListEntry_size                        0
+#define _TYPE_bleWhiteListEntry_size                            uint8_t
+#define _POSITION_bleWhiteListEntry_conf                        1
+#define _TYPE_bleWhiteListEntry_conf                            uint8_t
+#define _BITPOS_bleWhiteListEntry_conf_bEnable                  0
+#define _NBITS_bleWhiteListEntry_conf_bEnable                   1
+#define _BITPOS_bleWhiteListEntry_conf_addrType                 1
+#define _NBITS_bleWhiteListEntry_conf_addrType                  1
+#define _BITPOS_bleWhiteListEntry_conf_bWlIgn                   2
+#define _NBITS_bleWhiteListEntry_conf_bWlIgn                    1
+#define _POSITION_bleWhiteListEntry_address                     2
+#define _TYPE_bleWhiteListEntry_address                         uint16_t
+#define _POSITION_bleWhiteListEntry_addressHi                   4
+#define _TYPE_bleWhiteListEntry_addressHi                       uint32_t
+#define _SIZEOF_bleWhiteListEntry                               8
+
+#define _POSITION_bleRxStatus_status                            0
+#define _TYPE_bleRxStatus_status                                uint8_t
+#define _BITPOS_bleRxStatus_status_channel                      0
+#define _NBITS_bleRxStatus_status_channel                       6
+#define _BITPOS_bleRxStatus_status_bIgnore                      6
+#define _NBITS_bleRxStatus_status_bIgnore                       1
+#define _BITPOS_bleRxStatus_status_bCrcErr                      7
+#define _NBITS_bleRxStatus_status_bCrcErr                       1
+#define _SIZEOF_bleRxStatus                                     1
+
+#endif

cpu/cc26xx/dev/rfc-api/ble_mailbox.h

@@ -0,0 +1,119 @@
+/******************************************************************************
+*  Filename:       ble_mailbox.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    Definitions for BLE interface
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef _BLE_MAILBOX_H
+#define _BLE_MAILBOX_H
+
+#include "mailbox.h"
+
+/// \name CPE interrupt definitions for BLE
+/// Interrupt masks for the CPE interrupt in RDBELL. These are new names for interrupts in mailbox.h,
+/// used for compartibility with previous versions with separate interrupt numbers.
+///@{
+#define IRQN_BLE_TX_DONE            IRQN_TX_DONE
+#define IRQN_BLE_TX_ACK             IRQN_TX_ACK
+#define IRQN_BLE_TX_CTRL            IRQN_TX_CTRL
+#define IRQN_BLE_TX_CTRL_ACK        IRQN_TX_CTRL_ACK
+#define IRQN_BLE_TX_CTRL_ACK_ACK    IRQN_TX_CTRL_ACK_ACK
+#define IRQN_BLE_TX_RETRANS         IRQN_TX_RETRANS
+#define IRQN_BLE_TX_ENTRY_DONE      IRQN_TX_ENTRY_DONE
+#define IRQN_BLE_TX_BUFFER_CHANGED  IRQN_TX_BUFFER_CHANGED
+#define IRQN_BLE_RX_OK              IRQN_RX_OK
+#define IRQN_BLE_RX_NOK             IRQN_RX_NOK
+#define IRQN_BLE_RX_IGNORED         IRQN_RX_IGNORED
+#define IRQN_BLE_RX_EMPTY           IRQN_RX_EMPTY
+#define IRQN_BLE_RX_CTRL            IRQN_RX_CTRL
+#define IRQN_BLE_RX_CTRL_ACK        IRQN_RX_CTRL_ACK
+#define IRQN_BLE_RX_BUF_FULL        IRQN_RX_BUF_FULL
+#define IRQN_BLE_RX_ENTRY_DONE      IRQN_RX_ENTRY_DONE
+
+#define IRQ_BLE_TX_DONE             (1U << IRQN_BLE_TX_DONE)
+#define IRQ_BLE_TX_ACK              (1U << IRQN_BLE_TX_ACK)
+#define IRQ_BLE_TX_CTRL             (1U << IRQN_BLE_TX_CTRL)
+#define IRQ_BLE_TX_CTRL_ACK         (1U << IRQN_BLE_TX_CTRL_ACK)
+#define IRQ_BLE_TX_CTRL_ACK_ACK     (1U << IRQN_BLE_TX_CTRL_ACK_ACK)
+#define IRQ_BLE_TX_RETRANS          (1U << IRQN_BLE_TX_RETRANS)
+#define IRQ_BLE_TX_ENTRY_DONE       (1U << IRQN_BLE_TX_ENTRY_DONE)
+#define IRQ_BLE_TX_BUFFER_CHANGED   (1U << IRQN_BLE_TX_BUFFER_CHANGED)
+#define IRQ_BLE_RX_OK               (1U << IRQN_BLE_RX_OK)
+#define IRQ_BLE_RX_NOK              (1U << IRQN_BLE_RX_NOK)
+#define IRQ_BLE_RX_IGNORED          (1U << IRQN_BLE_RX_IGNORED)
+#define IRQ_BLE_RX_EMPTY            (1U << IRQN_BLE_RX_EMPTY)
+#define IRQ_BLE_RX_CTRL             (1U << IRQN_BLE_RX_CTRL)
+#define IRQ_BLE_RX_CTRL_ACK         (1U << IRQN_BLE_RX_CTRL_ACK)
+#define IRQ_BLE_RX_BUF_FULL         (1U << IRQN_BLE_RX_BUF_FULL)
+#define IRQ_BLE_RX_ENTRY_DONE       (1U << IRQN_BLE_RX_ENTRY_DONE)
+///@}
+
+
+
+/// \name Radio operation status
+/// Radio operation status format:
+/// Bits 15:12: Protocol
+///             0001: BLE
+/// Bits 11:10: Type
+///             00: Not finished
+///             01: Done successfully
+///             10: Done with error
+/// Bits 9:0:   Identifier
+
+/// \name Operation finished normally
+///@{
+#define BLE_DONE_OK             0x1400  ///< Operation ended normally
+#define BLE_DONE_RXTIMEOUT      0x1401  ///< Timeout of first Rx of slave operation or end of scan window
+#define BLE_DONE_NOSYNC         0x1402  ///< Timeout of subsequent Rx
+#define BLE_DONE_RXERR          0x1403  ///< Operation ended because of receive error (CRC or other)
+#define BLE_DONE_CONNECT        0x1404  ///< CONNECT_REQ received or transmitted
+#define BLE_DONE_MAXNACK        0x1405  ///< Maximum number of retransmissions exceeded
+#define BLE_DONE_ENDED          0x1406  ///< Operation stopped after end trigger
+#define BLE_DONE_ABORT          0x1407  ///< Operation aborted by command
+#define BLE_DONE_STOPPED        0x1408  ///< Operation stopped after stop command
+///@}
+/// \name Operation finished with error
+///@{
+#define BLE_ERROR_PAR           0x1800  ///< Illegal parameter
+#define BLE_ERROR_RXBUF         0x1801  ///< No available Rx buffer (Advertiser, Scanner, Initiator)
+#define BLE_ERROR_NO_SETUP      0x1802  ///< Operation using Rx or Tx attemted when not in BLE mode
+#define BLE_ERROR_NO_FS         0x1803  ///< Operation using Rx or Tx attemted without frequency synth configured
+#define BLE_ERROR_SYNTH_PROG    0x1804  ///< Synthesizer programming failed to complete on time
+#define BLE_ERROR_RXOVF         0x1805  ///< Receiver overflowed during operation
+#define BLE_ERROR_TXUNF         0x1806  ///< Transmitter underflowed during operation
+///@}
+///@}
+
+#endif

cpu/cc26xx/dev/rfc-api/common_cmd_field.h

@@ -0,0 +1,448 @@
+/******************************************************************************
+*  Filename:       common_cmd_field.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    CC26xx API for common/generic commands
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef __COMMON_CMD_FIELD_H
+#define __COMMON_CMD_FIELD_H
+
+#include <stdint.h>
+#include "mailbox.h"
+
+#define _POSITION_command_commandNo                             0
+#define _TYPE_command_commandNo                                 uint16_t
+#define _SIZEOF_command                                         2
+
+#define _POSITION_radioOp_commandNo                             0
+#define _TYPE_radioOp_commandNo                                 uint16_t
+#define _POSITION_radioOp_status                                2
+#define _TYPE_radioOp_status                                    uint16_t
+#define _POSITION_radioOp_pNextOp                               4
+#define _TYPE_radioOp_pNextOp                                   uint8_t*
+#define _POSITION_radioOp_startTime                             8
+#define _TYPE_radioOp_startTime                                 ratmr_t
+#define _POSITION_radioOp_startTrigger                          12
+#define _TYPE_radioOp_startTrigger                              uint8_t
+#define _BITPOS_radioOp_startTrigger_triggerType                0
+#define _NBITS_radioOp_startTrigger_triggerType                 4
+#define _BITPOS_radioOp_startTrigger_bEnaCmd                    4
+#define _NBITS_radioOp_startTrigger_bEnaCmd                     1
+#define _BITPOS_radioOp_startTrigger_triggerNo                  5
+#define _NBITS_radioOp_startTrigger_triggerNo                   2
+#define _BITPOS_radioOp_startTrigger_pastTrig                   7
+#define _NBITS_radioOp_startTrigger_pastTrig                    1
+#define _POSITION_radioOp_condition                             13
+#define _TYPE_radioOp_condition                                 uint8_t
+#define _BITPOS_radioOp_condition_rule                          0
+#define _NBITS_radioOp_condition_rule                           4
+#define _BITPOS_radioOp_condition_nSkip                         4
+#define _NBITS_radioOp_condition_nSkip                          4
+#define _SIZEOF_radioOp                                         14
+
+#define _SIZEOF_CMD_NOP                                         14
+
+#define _POSITION_CMD_RADIO_SETUP_mode                          14
+#define _TYPE_CMD_RADIO_SETUP_mode                              uint8_t
+#define _POSITION_CMD_RADIO_SETUP_config                        16
+#define _TYPE_CMD_RADIO_SETUP_config                            uint16_t
+#define _BITPOS_CMD_RADIO_SETUP_config_frontEndMode             0
+#define _NBITS_CMD_RADIO_SETUP_config_frontEndMode              3
+#define _BITPOS_CMD_RADIO_SETUP_config_biasMode                 3
+#define _NBITS_CMD_RADIO_SETUP_config_biasMode                  1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi0Setup             4
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi0Setup              1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi0Trim              5
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi0Trim               1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi0Ovr               6
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi0Ovr                1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi1Setup             7
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi1Setup              1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi1Trim              8
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi1Trim               1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoAdi1Ovr               9
+#define _NBITS_CMD_RADIO_SETUP_config_bNoAdi1Ovr                1
+#define _BITPOS_CMD_RADIO_SETUP_config_bNoFsPowerUp             10
+#define _NBITS_CMD_RADIO_SETUP_config_bNoFsPowerUp              1
+#define _POSITION_CMD_RADIO_SETUP_txPower                       18
+#define _TYPE_CMD_RADIO_SETUP_txPower                           uint16_t
+#define _BITPOS_CMD_RADIO_SETUP_txPower_IB                      0
+#define _NBITS_CMD_RADIO_SETUP_txPower_IB                       6
+#define _BITPOS_CMD_RADIO_SETUP_txPower_GC                      6
+#define _NBITS_CMD_RADIO_SETUP_txPower_GC                       2
+#define _BITPOS_CMD_RADIO_SETUP_txPower_tempCoeff               8
+#define _NBITS_CMD_RADIO_SETUP_txPower_tempCoeff                8
+#define _POSITION_CMD_RADIO_SETUP_pRegOverride                  20
+#define _TYPE_CMD_RADIO_SETUP_pRegOverride                      uint32_t*
+#define _SIZEOF_CMD_RADIO_SETUP                                 24
+
+#define _POSITION_CMD_FS_frequency                              14
+#define _TYPE_CMD_FS_frequency                                  uint16_t
+#define _POSITION_CMD_FS_fractFreq                              16
+#define _TYPE_CMD_FS_fractFreq                                  uint16_t
+#define _POSITION_CMD_FS_synthConf                              18
+#define _TYPE_CMD_FS_synthConf                                  uint8_t
+#define _BITPOS_CMD_FS_synthConf_bTxMode                        0
+#define _NBITS_CMD_FS_synthConf_bTxMode                         1
+#define _BITPOS_CMD_FS_synthConf_refFreq                        1
+#define _NBITS_CMD_FS_synthConf_refFreq                         6
+#define _POSITION_CMD_FS_calibConf                              19
+#define _TYPE_CMD_FS_calibConf                                  uint8_t
+#define _BITPOS_CMD_FS_calibConf_bOverrideCalib                 0
+#define _NBITS_CMD_FS_calibConf_bOverrideCalib                  1
+#define _BITPOS_CMD_FS_calibConf_bSkipTdcCalib                  1
+#define _NBITS_CMD_FS_calibConf_bSkipTdcCalib                   1
+#define _BITPOS_CMD_FS_calibConf_bSkipCoarseCalib               2
+#define _NBITS_CMD_FS_calibConf_bSkipCoarseCalib                1
+#define _BITPOS_CMD_FS_calibConf_bSkipMidCalib                  3
+#define _NBITS_CMD_FS_calibConf_bSkipMidCalib                   1
+#define _BITPOS_CMD_FS_calibConf_coarsePrecal                   4
+#define _NBITS_CMD_FS_calibConf_coarsePrecal                    4
+#define _POSITION_CMD_FS_midPrecal                              20
+#define _TYPE_CMD_FS_midPrecal                                  uint8_t
+#define _POSITION_CMD_FS_ktPrecal                               21
+#define _TYPE_CMD_FS_ktPrecal                                   uint8_t
+#define _POSITION_CMD_FS_tdcPrecal                              22
+#define _TYPE_CMD_FS_tdcPrecal                                  uint16_t
+#define _SIZEOF_CMD_FS                                          24
+
+#define _SIZEOF_CMD_FS_OFF                                      14
+
+#define _POSITION_CMD_RX_pktConfig                              14
+#define _TYPE_CMD_RX_pktConfig                                  uint16_t
+#define _BITPOS_CMD_RX_pktConfig_endianness                     0
+#define _NBITS_CMD_RX_pktConfig_endianness                      1
+#define _BITPOS_CMD_RX_pktConfig_numHdrBits                     1
+#define _NBITS_CMD_RX_pktConfig_numHdrBits                      6
+#define _BITPOS_CMD_RX_pktConfig_bFsOff                         7
+#define _NBITS_CMD_RX_pktConfig_bFsOff                          1
+#define _BITPOS_CMD_RX_pktConfig_bUseCrc                        8
+#define _NBITS_CMD_RX_pktConfig_bUseCrc                         1
+#define _BITPOS_CMD_RX_pktConfig_bCrcIncSw                      9
+#define _NBITS_CMD_RX_pktConfig_bCrcIncSw                       1
+#define _BITPOS_CMD_RX_pktConfig_bCrcIncHdr                     10
+#define _NBITS_CMD_RX_pktConfig_bCrcIncHdr                      1
+#define _BITPOS_CMD_RX_pktConfig_bReportCrc                     11
+#define _NBITS_CMD_RX_pktConfig_bReportCrc                      1
+#define _BITPOS_CMD_RX_pktConfig_endType                        12
+#define _NBITS_CMD_RX_pktConfig_endType                         1
+#define _BITPOS_CMD_RX_pktConfig_bDualSw                        13
+#define _NBITS_CMD_RX_pktConfig_bDualSw                         1
+#define _POSITION_CMD_RX_syncWord                               16
+#define _TYPE_CMD_RX_syncWord                                   uint32_t
+#define _POSITION_CMD_RX_syncWord2                              20
+#define _TYPE_CMD_RX_syncWord2                                  uint32_t
+#define _POSITION_CMD_RX_lenConfig                              24
+#define _TYPE_CMD_RX_lenConfig                                  uint16_t
+#define _BITPOS_CMD_RX_lenConfig_numLenBits                     0
+#define _NBITS_CMD_RX_lenConfig_numLenBits                      4
+#define _BITPOS_CMD_RX_lenConfig_lenFieldPos                    4
+#define _NBITS_CMD_RX_lenConfig_lenFieldPos                     5
+#define _BITPOS_CMD_RX_lenConfig_lenOffset                      9
+#define _NBITS_CMD_RX_lenConfig_lenOffset                       7
+#define _POSITION_CMD_RX_maxLen                                 26
+#define _TYPE_CMD_RX_maxLen                                     uint16_t
+#define _POSITION_CMD_RX_pRecPkt                                28
+#define _TYPE_CMD_RX_pRecPkt                                    uint8_t*
+#define _POSITION_CMD_RX_endTime                                32
+#define _TYPE_CMD_RX_endTime                                    ratmr_t
+#define _POSITION_CMD_RX_endTrigger                             36
+#define _TYPE_CMD_RX_endTrigger                                 uint8_t
+#define _BITPOS_CMD_RX_endTrigger_triggerType                   0
+#define _NBITS_CMD_RX_endTrigger_triggerType                    4
+#define _BITPOS_CMD_RX_endTrigger_bEnaCmd                       4
+#define _NBITS_CMD_RX_endTrigger_bEnaCmd                        1
+#define _BITPOS_CMD_RX_endTrigger_triggerNo                     5
+#define _NBITS_CMD_RX_endTrigger_triggerNo                      2
+#define _BITPOS_CMD_RX_endTrigger_pastTrig                      7
+#define _NBITS_CMD_RX_endTrigger_pastTrig                       1
+#define _POSITION_CMD_RX_rssi                                   37
+#define _TYPE_CMD_RX_rssi                                       int8_t
+#define _POSITION_CMD_RX_recLen                                 38
+#define _TYPE_CMD_RX_recLen                                     uint16_t
+#define _POSITION_CMD_RX_timeStamp                              40
+#define _TYPE_CMD_RX_timeStamp                                  ratmr_t
+#define _POSITION_CMD_RX_nRxOk                                  44
+#define _TYPE_CMD_RX_nRxOk                                      uint16_t
+#define _POSITION_CMD_RX_nRxNok                                 46
+#define _TYPE_CMD_RX_nRxNok                                     uint16_t
+#define _POSITION_CMD_RX_nRx2Ok                                 48
+#define _TYPE_CMD_RX_nRx2Ok                                     uint16_t
+#define _POSITION_CMD_RX_nRx2Nok                                50
+#define _TYPE_CMD_RX_nRx2Nok                                    uint16_t
+#define _SIZEOF_CMD_RX                                          52
+
+#define _POSITION_CMD_TX_pktConfig                              14
+#define _TYPE_CMD_TX_pktConfig                                  uint16_t
+#define _BITPOS_CMD_TX_pktConfig_endianness                     0
+#define _NBITS_CMD_TX_pktConfig_endianness                      1
+#define _BITPOS_CMD_TX_pktConfig_numHdrBits                     1
+#define _NBITS_CMD_TX_pktConfig_numHdrBits                      6
+#define _BITPOS_CMD_TX_pktConfig_bFsOff                         7
+#define _NBITS_CMD_TX_pktConfig_bFsOff                          1
+#define _BITPOS_CMD_TX_pktConfig_bUseCrc                        8
+#define _NBITS_CMD_TX_pktConfig_bUseCrc                         1
+#define _BITPOS_CMD_TX_pktConfig_bCrcIncSw                      9
+#define _NBITS_CMD_TX_pktConfig_bCrcIncSw                       1
+#define _BITPOS_CMD_TX_pktConfig_bCrcIncHdr                     10
+#define _NBITS_CMD_TX_pktConfig_bCrcIncHdr                      1
+#define _POSITION_CMD_TX_syncWord                               16
+#define _TYPE_CMD_TX_syncWord                                   uint32_t
+#define _POSITION_CMD_TX_pTxPkt                                 20
+#define _TYPE_CMD_TX_pTxPkt                                     uint8_t*
+#define _POSITION_CMD_TX_pktLen                                 24
+#define _TYPE_CMD_TX_pktLen                                     uint16_t
+#define _SIZEOF_CMD_TX                                          26
+
+#define _POSITION_CMD_RX_TEST_config                            14
+#define _TYPE_CMD_RX_TEST_config                                uint8_t
+#define _BITPOS_CMD_RX_TEST_config_bEnaFifo                     0
+#define _NBITS_CMD_RX_TEST_config_bEnaFifo                      1
+#define _BITPOS_CMD_RX_TEST_config_bFsOff                       1
+#define _NBITS_CMD_RX_TEST_config_bFsOff                        1
+#define _BITPOS_CMD_RX_TEST_config_bNoSync                      2
+#define _NBITS_CMD_RX_TEST_config_bNoSync                       1
+#define _POSITION_CMD_RX_TEST_endTrigger                        15
+#define _TYPE_CMD_RX_TEST_endTrigger                            uint8_t
+#define _BITPOS_CMD_RX_TEST_endTrigger_triggerType              0
+#define _NBITS_CMD_RX_TEST_endTrigger_triggerType               4
+#define _BITPOS_CMD_RX_TEST_endTrigger_bEnaCmd                  4
+#define _NBITS_CMD_RX_TEST_endTrigger_bEnaCmd                   1
+#define _BITPOS_CMD_RX_TEST_endTrigger_triggerNo                5
+#define _NBITS_CMD_RX_TEST_endTrigger_triggerNo                 2
+#define _BITPOS_CMD_RX_TEST_endTrigger_pastTrig                 7
+#define _NBITS_CMD_RX_TEST_endTrigger_pastTrig                  1
+#define _POSITION_CMD_RX_TEST_syncWord                          16
+#define _TYPE_CMD_RX_TEST_syncWord                              uint32_t
+#define _POSITION_CMD_RX_TEST_endTime                           20
+#define _TYPE_CMD_RX_TEST_endTime                               ratmr_t
+#define _SIZEOF_CMD_RX_TEST                                     24
+
+#define _POSITION_CMD_TX_TEST_config                            14
+#define _TYPE_CMD_TX_TEST_config                                uint8_t
+#define _BITPOS_CMD_TX_TEST_config_bUseCw                       0
+#define _NBITS_CMD_TX_TEST_config_bUseCw                        1
+#define _BITPOS_CMD_TX_TEST_config_bFsOff                       1
+#define _NBITS_CMD_TX_TEST_config_bFsOff                        1
+#define _BITPOS_CMD_TX_TEST_config_whitenMode                   2
+#define _NBITS_CMD_TX_TEST_config_whitenMode                    2
+#define _POSITION_CMD_TX_TEST_txWord                            16
+#define _TYPE_CMD_TX_TEST_txWord                                uint16_t
+#define _POSITION_CMD_TX_TEST_endTrigger                        19
+#define _TYPE_CMD_TX_TEST_endTrigger                            uint8_t
+#define _BITPOS_CMD_TX_TEST_endTrigger_triggerType              0
+#define _NBITS_CMD_TX_TEST_endTrigger_triggerType               4
+#define _BITPOS_CMD_TX_TEST_endTrigger_bEnaCmd                  4
+#define _NBITS_CMD_TX_TEST_endTrigger_bEnaCmd                   1
+#define _BITPOS_CMD_TX_TEST_endTrigger_triggerNo                5
+#define _NBITS_CMD_TX_TEST_endTrigger_triggerNo                 2
+#define _BITPOS_CMD_TX_TEST_endTrigger_pastTrig                 7
+#define _NBITS_CMD_TX_TEST_endTrigger_pastTrig                  1
+#define _POSITION_CMD_TX_TEST_syncWord                          20
+#define _TYPE_CMD_TX_TEST_syncWord                              uint32_t
+#define _POSITION_CMD_TX_TEST_endTime                           24
+#define _TYPE_CMD_TX_TEST_endTime                               ratmr_t
+#define _SIZEOF_CMD_TX_TEST                                     28
+
+#define _POSITION_CMD_SYNC_STOP_RAT_rat0                        16
+#define _TYPE_CMD_SYNC_STOP_RAT_rat0                            ratmr_t
+#define _SIZEOF_CMD_SYNC_STOP_RAT                               20
+
+#define _POSITION_CMD_SYNC_START_RAT_rat0                       16
+#define _TYPE_CMD_SYNC_START_RAT_rat0                           ratmr_t
+#define _SIZEOF_CMD_SYNC_START_RAT                              20
+
+#define _POSITION_CMD_COUNT_counter                             14
+#define _TYPE_CMD_COUNT_counter                                 uint16_t
+#define _SIZEOF_CMD_COUNT                                       16
+
+#define _POSITION_CMD_FS_POWERUP_pRegOverride                   16
+#define _TYPE_CMD_FS_POWERUP_pRegOverride                       uint32_t*
+#define _SIZEOF_CMD_FS_POWERUP                                  20
+
+#define _SIZEOF_CMD_FS_POWERDOWN                                14
+
+#define _POSITION_CMD_SCH_IMM_cmdrVal                           16
+#define _TYPE_CMD_SCH_IMM_cmdrVal                               uint32_t
+#define _POSITION_CMD_SCH_IMM_cmdstaVal                         20
+#define _TYPE_CMD_SCH_IMM_cmdstaVal                             uint32_t
+#define _SIZEOF_CMD_SCH_IMM                                     24
+
+#define _POSITION_CMD_COUNT_BRANCH_counter                      14
+#define _TYPE_CMD_COUNT_BRANCH_counter                          uint16_t
+#define _POSITION_CMD_COUNT_BRANCH_pNextOpIfOk                  16
+#define _TYPE_CMD_COUNT_BRANCH_pNextOpIfOk                      uint8_t*
+#define _SIZEOF_CMD_COUNT_BRANCH                                20
+
+#define _POSITION_CMD_PATTERN_CHECK_patternOpt                  14
+#define _TYPE_CMD_PATTERN_CHECK_patternOpt                      uint16_t
+#define _BITPOS_CMD_PATTERN_CHECK_patternOpt_operation          0
+#define _NBITS_CMD_PATTERN_CHECK_patternOpt_operation           2
+#define _BITPOS_CMD_PATTERN_CHECK_patternOpt_bByteRev           2
+#define _NBITS_CMD_PATTERN_CHECK_patternOpt_bByteRev            1
+#define _BITPOS_CMD_PATTERN_CHECK_patternOpt_bBitRev            3
+#define _NBITS_CMD_PATTERN_CHECK_patternOpt_bBitRev             1
+#define _BITPOS_CMD_PATTERN_CHECK_patternOpt_signExtend         4
+#define _NBITS_CMD_PATTERN_CHECK_patternOpt_signExtend          5
+#define _BITPOS_CMD_PATTERN_CHECK_patternOpt_bRxVal             9
+#define _NBITS_CMD_PATTERN_CHECK_patternOpt_bRxVal              1
+#define _POSITION_CMD_PATTERN_CHECK_pNextOpIfOk                 16
+#define _TYPE_CMD_PATTERN_CHECK_pNextOpIfOk                     uint8_t*
+#define _POSITION_CMD_PATTERN_CHECK_pValue                      20
+#define _TYPE_CMD_PATTERN_CHECK_pValue                          uint8_t*
+#define _POSITION_CMD_PATTERN_CHECK_mask                        24
+#define _TYPE_CMD_PATTERN_CHECK_mask                            uint32_t
+#define _POSITION_CMD_PATTERN_CHECK_compareVal                  28
+#define _TYPE_CMD_PATTERN_CHECK_compareVal                      uint32_t
+#define _SIZEOF_CMD_PATTERN_CHECK                               32
+
+#define _SIZEOF_CMD_ABORT                                       2
+
+#define _SIZEOF_CMD_STOP                                        2
+
+#define _SIZEOF_CMD_GET_RSSI                                    2
+
+#define _POSITION_CMD_UPDATE_RADIO_SETUP_pRegOverride           4
+#define _TYPE_CMD_UPDATE_RADIO_SETUP_pRegOverride               uint32_t*
+#define _SIZEOF_CMD_UPDATE_RADIO_SETUP                          8
+
+#define _POSITION_CMD_TRIGGER_triggerNo                         2
+#define _TYPE_CMD_TRIGGER_triggerNo                             uint8_t
+#define _SIZEOF_CMD_TRIGGER                                     3
+
+#define _POSITION_CMD_GET_FW_INFO_versionNo                     2
+#define _TYPE_CMD_GET_FW_INFO_versionNo                         uint16_t
+#define _POSITION_CMD_GET_FW_INFO_startOffset                   4
+#define _TYPE_CMD_GET_FW_INFO_startOffset                       uint16_t
+#define _POSITION_CMD_GET_FW_INFO_freeRamSz                     6
+#define _TYPE_CMD_GET_FW_INFO_freeRamSz                         uint16_t
+#define _POSITION_CMD_GET_FW_INFO_availRatCh                    8
+#define _TYPE_CMD_GET_FW_INFO_availRatCh                        uint16_t
+#define _SIZEOF_CMD_GET_FW_INFO                                 10
+
+#define _SIZEOF_CMD_START_RAT                                   2
+
+#define _SIZEOF_CMD_PING                                        2
+
+#define _POSITION_CMD_ADD_DATA_ENTRY_pQueue                     4
+#define _TYPE_CMD_ADD_DATA_ENTRY_pQueue                         dataQueue_t*
+#define _POSITION_CMD_ADD_DATA_ENTRY_pEntry                     8
+#define _TYPE_CMD_ADD_DATA_ENTRY_pEntry                         uint8_t*
+#define _SIZEOF_CMD_ADD_DATA_ENTRY                              12
+
+#define _POSITION_CMD_REMOVE_DATA_ENTRY_pQueue                  4
+#define _TYPE_CMD_REMOVE_DATA_ENTRY_pQueue                      dataQueue_t*
+#define _POSITION_CMD_REMOVE_DATA_ENTRY_pEntry                  8
+#define _TYPE_CMD_REMOVE_DATA_ENTRY_pEntry                      uint8_t*
+#define _SIZEOF_CMD_REMOVE_DATA_ENTRY                           12
+
+#define _POSITION_CMD_FLUSH_QUEUE_pQueue                        4
+#define _TYPE_CMD_FLUSH_QUEUE_pQueue                            dataQueue_t*
+#define _POSITION_CMD_FLUSH_QUEUE_pFirstEntry                   8
+#define _TYPE_CMD_FLUSH_QUEUE_pFirstEntry                       uint8_t*
+#define _SIZEOF_CMD_FLUSH_QUEUE                                 12
+
+#define _POSITION_CMD_CLEAR_RX_pQueue                           4
+#define _TYPE_CMD_CLEAR_RX_pQueue                               dataQueue_t*
+#define _SIZEOF_CMD_CLEAR_RX                                    8
+
+#define _POSITION_CMD_REMOVE_PENDING_ENTRIES_pQueue             4
+#define _TYPE_CMD_REMOVE_PENDING_ENTRIES_pQueue                 dataQueue_t*
+#define _POSITION_CMD_REMOVE_PENDING_ENTRIES_pFirstEntry        8
+#define _TYPE_CMD_REMOVE_PENDING_ENTRIES_pFirstEntry            uint8_t*
+#define _SIZEOF_CMD_REMOVE_PENDING_ENTRIES                      12
+
+#define _POSITION_CMD_SET_RAT_CMP_ratCh                         2
+#define _TYPE_CMD_SET_RAT_CMP_ratCh                             uint8_t
+#define _POSITION_CMD_SET_RAT_CMP_compareTime                   4
+#define _TYPE_CMD_SET_RAT_CMP_compareTime                       ratmr_t
+#define _SIZEOF_CMD_SET_RAT_CMP                                 8
+
+#define _POSITION_CMD_SET_RAT_CPT_config                        2
+#define _TYPE_CMD_SET_RAT_CPT_config                            uint16_t
+#define _BITPOS_CMD_SET_RAT_CPT_config_inputSrc                 3
+#define _NBITS_CMD_SET_RAT_CPT_config_inputSrc                  5
+#define _BITPOS_CMD_SET_RAT_CPT_config_ratCh                    8
+#define _NBITS_CMD_SET_RAT_CPT_config_ratCh                     4
+#define _BITPOS_CMD_SET_RAT_CPT_config_bRepeated                12
+#define _NBITS_CMD_SET_RAT_CPT_config_bRepeated                 1
+#define _BITPOS_CMD_SET_RAT_CPT_config_inputMode                13
+#define _NBITS_CMD_SET_RAT_CPT_config_inputMode                 2
+#define _SIZEOF_CMD_SET_RAT_CPT                                 4
+
+#define _POSITION_CMD_DISABLE_RAT_CH_ratCh                      2
+#define _TYPE_CMD_DISABLE_RAT_CH_ratCh                          uint8_t
+#define _SIZEOF_CMD_DISABLE_RAT_CH                              3
+
+#define _POSITION_CMD_SET_RAT_OUTPUT_config                     2
+#define _TYPE_CMD_SET_RAT_OUTPUT_config                         uint16_t
+#define _BITPOS_CMD_SET_RAT_OUTPUT_config_outputSel             2
+#define _NBITS_CMD_SET_RAT_OUTPUT_config_outputSel              3
+#define _BITPOS_CMD_SET_RAT_OUTPUT_config_outputMode            5
+#define _NBITS_CMD_SET_RAT_OUTPUT_config_outputMode             3
+#define _BITPOS_CMD_SET_RAT_OUTPUT_config_ratCh                 8
+#define _NBITS_CMD_SET_RAT_OUTPUT_config_ratCh                  4
+#define _SIZEOF_CMD_SET_RAT_OUTPUT                              4
+
+#define _POSITION_CMD_ARM_RAT_CH_ratCh                          2
+#define _TYPE_CMD_ARM_RAT_CH_ratCh                              uint8_t
+#define _SIZEOF_CMD_ARM_RAT_CH                                  3
+
+#define _POSITION_CMD_DISARM_RAT_CH_ratCh                       2
+#define _TYPE_CMD_DISARM_RAT_CH_ratCh                           uint8_t
+#define _SIZEOF_CMD_DISARM_RAT_CH                               3
+
+#define _POSITION_CMD_SET_TX_POWER_txPower                      2
+#define _TYPE_CMD_SET_TX_POWER_txPower                          uint16_t
+#define _BITPOS_CMD_SET_TX_POWER_txPower_IB                     0
+#define _NBITS_CMD_SET_TX_POWER_txPower_IB                      6
+#define _BITPOS_CMD_SET_TX_POWER_txPower_GC                     6
+#define _NBITS_CMD_SET_TX_POWER_txPower_GC                      2
+#define _BITPOS_CMD_SET_TX_POWER_txPower_tempCoeff              8
+#define _NBITS_CMD_SET_TX_POWER_txPower_tempCoeff               8
+#define _SIZEOF_CMD_SET_TX_POWER                                4
+
+#define _POSITION_CMD_UPDATE_FS_frequency                       2
+#define _TYPE_CMD_UPDATE_FS_frequency                           uint16_t
+#define _POSITION_CMD_UPDATE_FS_fractFreq                       4
+#define _TYPE_CMD_UPDATE_FS_fractFreq                           uint16_t
+#define _SIZEOF_CMD_UPDATE_FS                                   6
+
+#define _POSITION_CMD_BUS_REQUEST_bSysBusNeeded                 2
+#define _TYPE_CMD_BUS_REQUEST_bSysBusNeeded                     uint8_t
+#define _SIZEOF_CMD_BUS_REQUEST                                 3
+
+#endif

cpu/cc26xx/dev/rfc-api/data_entry.h

@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef __DATA_ENTRY_H
+#define __DATA_ENTRY_H
+
+#include <stdint.h>
+#include "mailbox.h"
+
+typedef struct rfc_dataEntry_s rfc_dataEntry_t;
+
+#define _POSITION_dataEntry_pNextEntry                          0
+#define _TYPE_dataEntry_pNextEntry                              uint8_t*
+#define _POSITION_dataEntry_status                              4
+#define _TYPE_dataEntry_status                                  uint8_t
+#define _POSITION_dataEntry_config                              5
+#define _TYPE_dataEntry_config                                  uint8_t
+#define _BITPOS_dataEntry_config_type                           0
+#define _NBITS_dataEntry_config_type                            2
+#define _BITPOS_dataEntry_config_lenSz                          2
+#define _NBITS_dataEntry_config_lenSz                           2
+#define _BITPOS_dataEntry_config_irqIntv                        4
+#define _NBITS_dataEntry_config_irqIntv                         4
+#define _POSITION_dataEntry_length                              6
+#define _TYPE_dataEntry_length                                  uint16_t
+#define _POSITION_dataEntry_data                                8
+#define _TYPE_dataEntry_data                                    uint8_t
+#define _POSITION_dataEntry_pData                               8
+#define _TYPE_dataEntry_pData                                   uint8_t*
+#define _POSITION_dataEntry_numElements                         8
+#define _TYPE_dataEntry_numElements                             uint16_t
+#define _POSITION_dataEntry_pktStatus                           8
+#define _TYPE_dataEntry_pktStatus                               uint16_t
+#define _BITPOS_dataEntry_pktStatus_numElements                 0
+#define _NBITS_dataEntry_pktStatus_numElements                  13
+#define _BITPOS_dataEntry_pktStatus_bEntryOpen                  13
+#define _NBITS_dataEntry_pktStatus_bEntryOpen                   1
+#define _BITPOS_dataEntry_pktStatus_bFirstCont                  14
+#define _NBITS_dataEntry_pktStatus_bFirstCont                   1
+#define _BITPOS_dataEntry_pktStatus_bLastCont                   15
+#define _NBITS_dataEntry_pktStatus_bLastCont                    1
+#define _POSITION_dataEntry_nextIndex                           10
+#define _TYPE_dataEntry_nextIndex                               uint16_t
+#define _POSITION_dataEntry_rxData                              12
+#define _TYPE_dataEntry_rxData                                  uint8_t
+#define _LAST_POSITION_dataEntry                                12
+#define _LAST_TYPE_dataEntry                                    uint8_t
+
+struct rfc_dataEntry_s {
+   uint8_t* pNextEntry;
+   uint8_t status;
+   struct {
+      uint8_t type:2;
+      uint8_t lenSz:2;
+      uint8_t irqIntv:4;
+   } config;
+   uint16_t length;
+   uint8_t data;
+   uint8_t __dummy0;
+   uint16_t nextIndex;
+   uint8_t rxData;
+};
+
+#endif

cpu/cc26xx/dev/rfc-api/ieee_cmd.h

@@ -0,0 +1,614 @@
+/******************************************************************************
+*  Filename:       ieee_cmd.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    CC26xx/CC13xx API for IEEE 802.15.4 commands
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef __IEEE_CMD_H
+#define __IEEE_CMD_H
+
+#ifndef __RFC_STRUCT
+#ifdef __GNUC__
+#define __RFC_STRUCT __attribute__ ((aligned (4)))
+#else
+#define __RFC_STRUCT
+#endif
+#endif
+
+//! \addtogroup rfc
+//! @{
+
+//! \addtogroup ieee_cmd
+//! @{
+
+#include <stdint.h>
+#include "mailbox.h"
+#include "common_cmd.h"
+
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_RX_s rfc_CMD_IEEE_RX_t;
+typedef struct __RFC_STRUCT rfc_shortAddrEntry_s rfc_shortAddrEntry_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_CSMA_s rfc_CMD_IEEE_CSMA_t;
+typedef struct __RFC_STRUCT rfc_ieeeAuxSecCtrl_s rfc_ieeeAuxSecCtrl_t;
+typedef struct __RFC_STRUCT rfc_ieeeRxCorrCrc_s rfc_ieeeRxCorrCrc_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_RX_ACK_s rfc_CMD_IEEE_RX_ACK_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_BG_s rfc_CMD_IEEE_ABORT_BG_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_ED_SCAN_s rfc_CMD_IEEE_ED_SCAN_t;
+typedef struct __RFC_STRUCT rfc_ieeeMacHdr_s rfc_ieeeMacHdr_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_FG_s rfc_CMD_IEEE_ABORT_FG_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_CCA_REQ_s rfc_CMD_IEEE_CCA_REQ_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_SETUP_s rfc_CMD_IEEE_SETUP_t;
+typedef struct __RFC_STRUCT rfc_ieeeRxOutput_s rfc_ieeeRxOutput_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_SRC_MATCH_s rfc_CMD_IEEE_MOD_SRC_MATCH_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_STOP_FG_s rfc_CMD_IEEE_STOP_FG_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_TX_s rfc_CMD_IEEE_TX_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_FILT_s rfc_CMD_IEEE_MOD_FILT_t;
+typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_CCA_s rfc_CMD_IEEE_MOD_CCA_t;
+
+//! \addtogroup CMD_IEEE_RX
+//! @{
+#define CMD_IEEE_RX                                             0x2801
+struct __RFC_STRUCT rfc_CMD_IEEE_RX_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2801
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+   uint8_t channel;                     //!< \brief Channel to tune to in the start of the operation<br>
+                                        //!<        0: Use existing channel<br>
+                                        //!<        11&ndash;26: Use as IEEE 802.15.4 channel, i.e. frequency is (2405 + 5 &times; (channel - 11)) MHz<br>
+                                        //!<        60&ndash;207: Frequency is  (2300 + channel) MHz<br>
+                                        //!<        Others: <i>Reserved</i>
+   struct {
+      uint8_t bAutoFlushCrc:1;          //!<        If 1, automatically remove packets with CRC error from Rx queue
+      uint8_t bAutoFlushIgn:1;          //!<        If 1, automatically remove packets that can be ignored according to frame filtering from Rx queue
+      uint8_t bIncludePhyHdr:1;         //!<        If 1, include the received PHY header field in the stored packet; otherwise discard it
+      uint8_t bIncludeCrc:1;            //!<        If 1, include the received CRC field in the stored packet; otherwise discard it
+      uint8_t bAppendRssi:1;            //!<        If 1, append an RSSI byte to the packet in the Rx queue
+      uint8_t bAppendCorrCrc:1;         //!<        If 1, append a correlation value and CRC result byte to the packet in the Rx queue
+      uint8_t bAppendSrcInd:1;          //!<        If 1, append an index from the source matching algorithm
+      uint8_t bAppendTimestamp:1;       //!<        If 1, append a timestamp to the packet in the Rx queue
+   } rxConfig;
+   dataQueue_t* pRxQ;                   //!<        Pointer to receive queue
+   rfc_ieeeRxOutput_t *pOutput;         //!<        Pointer to output structure (NULL: Do not store results)
+   struct {
+      uint16_t frameFiltEn:1;           //!< \brief 0: Disable frame filtering<br>
+                                        //!<        1: Enable frame filtering
+      uint16_t frameFiltStop:1;         //!< \brief 0: Receive all packets to the end<br>
+                                        //!<        1: Stop receiving frame once frame filtering has caused the frame to be rejected.
+      uint16_t autoAckEn:1;             //!< \brief 0: Disable auto ACK<br>
+                                        //!<        1: Enable auto ACK.
+      uint16_t slottedAckEn:1;          //!< \brief 0: Non-slotted ACK<br>
+                                        //!<        1: Slotted ACK.
+      uint16_t autoPendEn:1;            //!< \brief 0: Auto-pend disabled<br>
+                                        //!<        1: Auto-pend enabled
+      uint16_t defaultPend:1;           //!<        The value of the pending data bit in auto ACK packets that are not subject to auto-pend
+      uint16_t bPendDataReqOnly:1;      //!< \brief 0: Use auto-pend for any packet<br>
+                                        //!<        1: Use auto-pend for data request packets only
+      uint16_t bPanCoord:1;             //!< \brief 0: Device is not PAN coordinator<br>
+                                        //!<        1: Device is PAN coordinator
+      uint16_t maxFrameVersion:2;       //!<        Reject frames where the frame version field in the FCF is greater than this value
+      uint16_t fcfReservedMask:3;       //!<        Value to be AND-ed with the reserved part of the FCF; frame rejected if result is non-zero
+      uint16_t modifyFtFilter:2;        //!< \brief Treatment of MSB of frame type field before frame-type filtering:<br>
+                                        //!<        0: No modification<br>
+                                        //!<        1: Invert MSB<br>
+                                        //!<        2: Set MSB to 0<br>
+                                        //!<        3: Set MSB to 1
+      uint16_t bStrictLenFilter:1;      //!< \brief 0: Accept acknowledgement frames of any length >= 5<br>
+                                        //!<        1: Accept only acknowledgement frames of length 5
+   } frameFiltOpt;                      //!<        Frame filtering options
+   struct {
+      uint8_t bAcceptFt0Beacon:1;       //!< \brief Treatment of frames with frame type 000 (beacon):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt1Data:1;         //!< \brief Treatment of frames with frame type 001 (data):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt2Ack:1;          //!< \brief Treatment of frames with frame type 010 (ACK):<br>
+                                        //!<        0: Reject, unless running ACK receive command<br>
+                                        //!<        1: Always accept
+      uint8_t bAcceptFt3MacCmd:1;       //!< \brief Treatment of frames with frame type 011 (MAC command):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt4Reserved:1;     //!< \brief Treatment of frames with frame type 100 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt5Reserved:1;     //!< \brief Treatment of frames with frame type 101 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt6Reserved:1;     //!< \brief Treatment of frames with frame type 110 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt7Reserved:1;     //!< \brief Treatment of frames with frame type 111 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+   } frameTypes;                        //!<        Frame types to receive in frame filtering
+   struct {
+      uint8_t ccaEnEnergy:1;            //!<        Enable energy scan as CCA source
+      uint8_t ccaEnCorr:1;              //!<        Enable correlator based carrier sense as CCA source
+      uint8_t ccaEnSync:1;              //!<        Enable sync found based carrier sense as CCA source
+      uint8_t ccaCorrOp:1;              //!< \brief Operator to use between energy based and correlator based CCA<br>
+                                        //!<        0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
+                                        //!<        1: Report busy channel if both ccaEnergy and ccaCorr are busy
+      uint8_t ccaSyncOp:1;              //!< \brief Operator to use between sync found based CCA and the others<br>
+                                        //!<        0: Always report busy channel if ccaSync is busy<br>
+                                        //!<        1: Always report idle channel if ccaSync is idle
+      uint8_t ccaCorrThr:2;             //!<        Threshold for number of correlation peaks in correlator based carrier sense
+   } ccaOpt;                            //!<        CCA options
+   int8_t ccaRssiThr;                   //!<        RSSI threshold for CCA
+   uint8_t __dummy0;
+   uint8_t numExtEntries;               //!<        Number of extended address entries
+   uint8_t numShortEntries;             //!<        Number of short address entries
+   uint32_t* pExtEntryList;             //!<        Pointer to list of extended address entries
+   rfc_shortAddrEntry_t *pShortEntryList;//!<        Pointer to list of short address entries
+   uint64_t localExtAddr;               //!<        The extended address of the local device
+   uint16_t localShortAddr;             //!<        The short address of the local device
+   uint16_t localPanID;                 //!<        The PAN ID of the local device
+   uint16_t __dummy1;
+   uint8_t __dummy2;
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } endTrigger;                        //!<        Trigger that causes the device to end the Rx operation
+   ratmr_t endTime;                     //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the Rx
+                                        //!<        operation
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_ED_SCAN
+//! @{
+#define CMD_IEEE_ED_SCAN                                        0x2802
+struct __RFC_STRUCT rfc_CMD_IEEE_ED_SCAN_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2802
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+   uint8_t channel;                     //!< \brief Channel to tune to in the start of the operation<br>
+                                        //!<        0: Use existing channel<br>
+                                        //!<        11&ndash;26: Use as IEEE 802.15.4 channel, i.e. frequency is (2405 + 5 &times; (channel - 11)) MHz<br>
+                                        //!<        60&ndash;207: Frequency is  (2300 + channel) MHz<br>
+                                        //!<        Others: <i>Reserved</i>
+   struct {
+      uint8_t ccaEnEnergy:1;            //!<        Enable energy scan as CCA source
+      uint8_t ccaEnCorr:1;              //!<        Enable correlator based carrier sense as CCA source
+      uint8_t ccaEnSync:1;              //!<        Enable sync found based carrier sense as CCA source
+      uint8_t ccaCorrOp:1;              //!< \brief Operator to use between energy based and correlator based CCA<br>
+                                        //!<        0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
+                                        //!<        1: Report busy channel if both ccaEnergy and ccaCorr are busy
+      uint8_t ccaSyncOp:1;              //!< \brief Operator to use between sync found based CCA and the others<br>
+                                        //!<        0: Always report busy channel if ccaSync is busy<br>
+                                        //!<        1: Always report idle channel if ccaSync is idle
+      uint8_t ccaCorrThr:2;             //!<        Threshold for number of correlation peaks in correlator based carrier sense
+   } ccaOpt;                            //!<        CCA options
+   int8_t ccaRssiThr;                   //!<        RSSI threshold for CCA
+   uint8_t __dummy0;
+   int8_t maxRssi;                      //!<        The maximum RSSI recorded during the ED scan
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } endTrigger;                        //!<        Trigger that causes the device to end the Rx operation
+   ratmr_t endTime;                     //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the Rx
+                                        //!<        operation
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_TX
+//! @{
+#define CMD_IEEE_TX                                             0x2C01
+struct __RFC_STRUCT rfc_CMD_IEEE_TX_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2C01
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+   struct {
+      uint8_t bIncludePhyHdr:1;         //!< \brief 0: Find PHY header automatically<br>
+                                        //!<        1: Insert PHY header from the buffer
+      uint8_t bIncludeCrc:1;            //!< \brief 0: Append automatically calculated CRC<br>
+                                        //!<        1: Insert FCS (CRC) from the buffer
+      uint8_t :1;
+      uint8_t payloadLenMsb:5;          //!< \brief Most significant bits of payload length. Should only be non-zero to create long
+                                        //!<        non-standard packets for test purposes
+   } txOpt;
+   uint8_t payloadLen;                  //!<        Number of bytes in the payload
+   uint8_t* pPayload;                   //!<        Pointer to payload buffer of size <code>payloadLen</code>
+   ratmr_t timeStamp;                   //!<        Time stamp of transmitted frame
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_CSMA
+//! @{
+#define CMD_IEEE_CSMA                                           0x2C02
+struct __RFC_STRUCT rfc_CMD_IEEE_CSMA_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2C02
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+   uint16_t randomState;                //!<        The state of the pseudo-random generator
+   uint8_t macMaxBE;                    //!<        The IEEE 802.15.4 MAC parameter <i>macMaxBE</i>
+   uint8_t macMaxCSMABackoffs;          //!<        The IEEE 802.15.4 MAC parameter <i>macMaxCSMABackoffs</i>
+   struct {
+      uint8_t initCW:5;                 //!<        The initialization value for the CW parameter
+      uint8_t bSlotted:1;               //!< \brief 0:  non-slotted CSMA<br>
+                                        //!<        1: slotted CSMA
+      uint8_t rxOffMode:2;              //!< \brief 0: RX stays on during CSMA backoffs<br>
+                                        //!<        1: The CSMA-CA algorithm will suspend the receiver if no frame is being received<br>
+                                        //!<        2: The CSMA-CA algorithm will suspend the receiver if no frame is being received,
+                                        //!<        or after finishing it (including auto ACK) otherwise<br>
+                                        //!<        3: The CSMA-CA algorithm will suspend the receiver immediately during back-offs
+   } csmaConfig;
+   uint8_t NB;                          //!<        The NB parameter from the IEEE 802.15.4 CSMA-CA algorithm
+   uint8_t BE;                          //!<        The BE parameter from the IEEE 802.15.4 CSMA-CA algorithm
+   uint8_t remainingPeriods;            //!<        The number of remaining periods from a paused backoff countdown
+   int8_t lastRssi;                     //!<        RSSI measured at the last CCA operation
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } endTrigger;                        //!<        Trigger that causes the device to end the CSMA-CA operation
+   ratmr_t lastTimeStamp;               //!<        Time of the last CCA operation
+   ratmr_t endTime;                     //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
+                                        //!<        CSMA-CA operation
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_RX_ACK
+//! @{
+#define CMD_IEEE_RX_ACK                                         0x2C03
+struct __RFC_STRUCT rfc_CMD_IEEE_RX_ACK_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2C03
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+   uint8_t seqNo;                       //!<        Sequence number to expect
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } endTrigger;                        //!<        Trigger that causes the device to give up acknowledgement reception
+   ratmr_t endTime;                     //!< \brief Time used together with <code>endTrigger</code> that causes the device to give up
+                                        //!<        acknowledgement reception
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_ABORT_BG
+//! @{
+#define CMD_IEEE_ABORT_BG                                       0x2C04
+struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_BG_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2C04
+   uint16_t status;                     //!< \brief An integer telling the status of the command. This value is
+                                        //!<        updated by the radio CPU during operation and may be read by the
+                                        //!<        system CPU at any time.
+   rfc_radioOp_t *pNextOp;              //!<        Pointer to the next operation to run after this operation is done
+   ratmr_t startTime;                   //!<        Absolute or relative start time (depending on the value of <code>startTrigger</code>)
+   struct {
+      uint8_t triggerType:4;            //!<        The type of trigger
+      uint8_t bEnaCmd:1;                //!< \brief 0: No alternative trigger command<br>
+                                        //!<        1: CMD_TRIGGER can be used as an alternative trigger
+      uint8_t triggerNo:2;              //!<        The trigger number of the CMD_TRIGGER command that triggers this action
+      uint8_t pastTrig:1;               //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
+                                        //!<        1: A trigger in the past is triggered as soon as possible
+   } startTrigger;                      //!<        Identification of the trigger that starts the operation
+   struct {
+      uint8_t rule:4;                   //!<        Condition for running next command: Rule for how to proceed
+      uint8_t nSkip:4;                  //!<        Number of skips if the rule involves skipping
+   } condition;
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_MOD_CCA
+//! @{
+#define CMD_IEEE_MOD_CCA                                        0x2001
+struct __RFC_STRUCT rfc_CMD_IEEE_MOD_CCA_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2001
+   struct {
+      uint8_t ccaEnEnergy:1;            //!<        Enable energy scan as CCA source
+      uint8_t ccaEnCorr:1;              //!<        Enable correlator based carrier sense as CCA source
+      uint8_t ccaEnSync:1;              //!<        Enable sync found based carrier sense as CCA source
+      uint8_t ccaCorrOp:1;              //!< \brief Operator to use between energy based and correlator based CCA<br>
+                                        //!<        0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
+                                        //!<        1: Report busy channel if both ccaEnergy and ccaCorr are busy
+      uint8_t ccaSyncOp:1;              //!< \brief Operator to use between sync found based CCA and the others<br>
+                                        //!<        0: Always report busy channel if ccaSync is busy<br>
+                                        //!<        1: Always report idle channel if ccaSync is idle
+      uint8_t ccaCorrThr:2;             //!<        Threshold for number of correlation peaks in correlator based carrier sense
+   } newCcaOpt;                         //!<        New value of <code>ccaOpt</code> for the running background level operation
+   int8_t newCcaRssiThr;                //!<        New value of <code>ccaRssiThr</code> for the running background level operation
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_MOD_FILT
+//! @{
+#define CMD_IEEE_MOD_FILT                                       0x2002
+struct __RFC_STRUCT rfc_CMD_IEEE_MOD_FILT_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2002
+   struct {
+      uint16_t frameFiltEn:1;           //!< \brief 0: Disable frame filtering<br>
+                                        //!<        1: Enable frame filtering
+      uint16_t frameFiltStop:1;         //!< \brief 0: Receive all packets to the end<br>
+                                        //!<        1: Stop receiving frame once frame filtering has caused the frame to be rejected.
+      uint16_t autoAckEn:1;             //!< \brief 0: Disable auto ACK<br>
+                                        //!<        1: Enable auto ACK.
+      uint16_t slottedAckEn:1;          //!< \brief 0: Non-slotted ACK<br>
+                                        //!<        1: Slotted ACK.
+      uint16_t autoPendEn:1;            //!< \brief 0: Auto-pend disabled<br>
+                                        //!<        1: Auto-pend enabled
+      uint16_t defaultPend:1;           //!<        The value of the pending data bit in auto ACK packets that are not subject to auto-pend
+      uint16_t bPendDataReqOnly:1;      //!< \brief 0: Use auto-pend for any packet<br>
+                                        //!<        1: Use auto-pend for data request packets only
+      uint16_t bPanCoord:1;             //!< \brief 0: Device is not PAN coordinator<br>
+                                        //!<        1: Device is PAN coordinator
+      uint16_t maxFrameVersion:2;       //!<        Reject frames where the frame version field in the FCF is greater than this value
+      uint16_t fcfReservedMask:3;       //!<        Value to be AND-ed with the reserved part of the FCF; frame rejected if result is non-zero
+      uint16_t modifyFtFilter:2;        //!< \brief Treatment of MSB of frame type field before frame-type filtering:<br>
+                                        //!<        0: No modification<br>
+                                        //!<        1: Invert MSB<br>
+                                        //!<        2: Set MSB to 0<br>
+                                        //!<        3: Set MSB to 1
+      uint16_t bStrictLenFilter:1;      //!< \brief 0: Accept acknowledgement frames of any length >= 5<br>
+                                        //!<        1: Accept only acknowledgement frames of length 5
+   } newFrameFiltOpt;                   //!<        New value of <code>frameFiltOpt</code> for the running background level operation
+   struct {
+      uint8_t bAcceptFt0Beacon:1;       //!< \brief Treatment of frames with frame type 000 (beacon):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt1Data:1;         //!< \brief Treatment of frames with frame type 001 (data):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt2Ack:1;          //!< \brief Treatment of frames with frame type 010 (ACK):<br>
+                                        //!<        0: Reject, unless running ACK receive command<br>
+                                        //!<        1: Always accept
+      uint8_t bAcceptFt3MacCmd:1;       //!< \brief Treatment of frames with frame type 011 (MAC command):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt4Reserved:1;     //!< \brief Treatment of frames with frame type 100 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt5Reserved:1;     //!< \brief Treatment of frames with frame type 101 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt6Reserved:1;     //!< \brief Treatment of frames with frame type 110 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+      uint8_t bAcceptFt7Reserved:1;     //!< \brief Treatment of frames with frame type 111 (reserved):<br>
+                                        //!<        0: Reject<br>
+                                        //!<        1: Accept
+   } newFrameTypes;                     //!<        New value of <code>frameTypes</code> for the running background level operation
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_MOD_SRC_MATCH
+//! @{
+#define CMD_IEEE_MOD_SRC_MATCH                                  0x2003
+struct __RFC_STRUCT rfc_CMD_IEEE_MOD_SRC_MATCH_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2003
+   struct {
+      uint8_t bEnable:1;                //!< \brief 0: Disable entry<br>
+                                        //!<        1: Enable entry
+      uint8_t srcPend:1;                //!<        New value of the pending bit for the entry
+      uint8_t entryType:1;              //!< \brief 0: Extended address<br>
+                                        //!<        1: Short address
+   } options;
+   uint8_t entryNo;                     //!<        Index of entry to enable or disable
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_ABORT_FG
+//! @{
+#define CMD_IEEE_ABORT_FG                                       0x2401
+struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_FG_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2401
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_STOP_FG
+//! @{
+#define CMD_IEEE_STOP_FG                                        0x2402
+struct __RFC_STRUCT rfc_CMD_IEEE_STOP_FG_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2402
+};
+
+//! @}
+
+//! \addtogroup CMD_IEEE_CCA_REQ
+//! @{
+#define CMD_IEEE_CCA_REQ                                        0x2403
+struct __RFC_STRUCT rfc_CMD_IEEE_CCA_REQ_s {
+   uint16_t commandNo;                  //!<        The command ID number 0x2403
+   int8_t currentRssi;                  //!<        The RSSI currently observed on the channel
+   int8_t maxRssi;                      //!<        The maximum RSSI observed on the channel since Rx was started
+   struct {
+      uint8_t ccaState:2;               //!< \brief Value of the current CCA state<br>
+                                        //!<        0: Idle<br>
+                                        //!<        1: Busy<br>
+                                        //!<        2: Invalid
+      uint8_t ccaEnergy:2;              //!< \brief Value of the current energy detect CCA state<br>
+                                        //!<        0: Idle<br>
+                                        //!<        1: Busy<br>
+                                        //!<        2: Invalid
+      uint8_t ccaCorr:2;                //!< \brief Value of the current correlator based carrier sense CCA state<br>
+                                        //!<        0: Idle<br>
+                                        //!<        1: Busy<br>
+                                        //!<        2: Invalid
+      uint8_t ccaSync:1;                //!< \brief Value of the current sync found based carrier sense CCA state<br>
+                                        //!<        0: Idle<br>
+                                        //!<        1: Busy
+   } ccaInfo;
+};
+
+//! @}
+
+//! \addtogroup ieeeRxOutput
+//! @{
+//! Output structure for CMD_IEEE_RX
+
+struct __RFC_STRUCT rfc_ieeeRxOutput_s {
+   uint8_t nTxAck;                      //!<        Total number of transmitted ACK frames
+   uint8_t nRxBeacon;                   //!<        Number of received beacon frames
+   uint8_t nRxData;                     //!<        Number of received data frames
+   uint8_t nRxAck;                      //!<        Number of received acknowledgement frames
+   uint8_t nRxMacCmd;                   //!<        Number of received MAC command frames
+   uint8_t nRxReserved;                 //!<        Number of received frames with reserved frame type
+   uint8_t nRxNok;                      //!<        Number of received frames with CRC error
+   uint8_t nRxIgnored;                  //!<        Number of frames received that are to be ignored
+   uint8_t nRxBufFull;                  //!<        Number of received frames discarded because the Rx buffer was full
+   int8_t lastRssi;                     //!<        RSSI of last received frame
+   int8_t maxRssi;                      //!<        Highest RSSI observed in the operation
+   uint8_t __dummy0;
+   ratmr_t beaconTimeStamp;             //!<        Time stamp of last received beacon frame
+};
+
+//! @}
+
+//! \addtogroup shortAddrEntry
+//! @{
+//! Structure for short address entries
+
+struct __RFC_STRUCT rfc_shortAddrEntry_s {
+   uint16_t shortAddr;                  //!<        Short address
+   uint16_t panId;                      //!<        PAN ID
+};
+
+//! @}
+
+//! \addtogroup ieeeRxCorrCrc
+//! @{
+//! Receive status byte that may be appended to message in receive buffer
+
+struct __RFC_STRUCT rfc_ieeeRxCorrCrc_s {
+   struct {
+      uint8_t corr:6;                   //!<        The correlation value
+      uint8_t bIgnore:1;                //!<        1 if the packet should be rejected by frame filtering, 0 otherwise
+      uint8_t bCrcErr:1;                //!<        1 if the packet was received with CRC error, 0 otherwise
+   } status;
+};
+
+//! @}
+
+//! @}
+//! @}
+#endif

cpu/cc26xx/dev/rfc-api/ieee_cmd_field.h

@@ -0,0 +1,403 @@
+/******************************************************************************
+*  Filename:       ieee_cmd_field.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    CC26xx/CC13xx API for IEEE 802.15.4 commands
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef __IEEE_CMD_FIELD_H
+#define __IEEE_CMD_FIELD_H
+
+#include <stdint.h>
+#include "mailbox.h"
+#include "common_cmd.h"
+
+#define _POSITION_CMD_IEEE_RX_channel                           14
+#define _TYPE_CMD_IEEE_RX_channel                               uint8_t
+#define _POSITION_CMD_IEEE_RX_rxConfig                          15
+#define _TYPE_CMD_IEEE_RX_rxConfig                              uint8_t
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAutoFlushCrc              0
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAutoFlushCrc               1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAutoFlushIgn              1
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAutoFlushIgn               1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bIncludePhyHdr             2
+#define _NBITS_CMD_IEEE_RX_rxConfig_bIncludePhyHdr              1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bIncludeCrc                3
+#define _NBITS_CMD_IEEE_RX_rxConfig_bIncludeCrc                 1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAppendRssi                4
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAppendRssi                 1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAppendCorrCrc             5
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAppendCorrCrc              1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAppendSrcInd              6
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAppendSrcInd               1
+#define _BITPOS_CMD_IEEE_RX_rxConfig_bAppendTimestamp           7
+#define _NBITS_CMD_IEEE_RX_rxConfig_bAppendTimestamp            1
+#define _POSITION_CMD_IEEE_RX_pRxQ                              16
+#define _TYPE_CMD_IEEE_RX_pRxQ                                  dataQueue_t*
+#define _POSITION_CMD_IEEE_RX_pOutput                           20
+#define _TYPE_CMD_IEEE_RX_pOutput                               uint8_t*
+#define _POSITION_CMD_IEEE_RX_frameFiltOpt                      24
+#define _TYPE_CMD_IEEE_RX_frameFiltOpt                          uint16_t
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_frameFiltEn            0
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_frameFiltEn             1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_frameFiltStop          1
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_frameFiltStop           1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_autoAckEn              2
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_autoAckEn               1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_slottedAckEn           3
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_slottedAckEn            1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_autoPendEn             4
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_autoPendEn              1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_defaultPend            5
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_defaultPend             1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_bPendDataReqOnly       6
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_bPendDataReqOnly        1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_bPanCoord              7
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_bPanCoord               1
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_maxFrameVersion        8
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_maxFrameVersion         2
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_fcfReservedMask        10
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_fcfReservedMask         3
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_modifyFtFilter         13
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_modifyFtFilter          2
+#define _BITPOS_CMD_IEEE_RX_frameFiltOpt_bStrictLenFilter       15
+#define _NBITS_CMD_IEEE_RX_frameFiltOpt_bStrictLenFilter        1
+#define _POSITION_CMD_IEEE_RX_frameTypes                        26
+#define _TYPE_CMD_IEEE_RX_frameTypes                            uint8_t
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt0Beacon         0
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt0Beacon          1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt1Data           1
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt1Data            1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt2Ack            2
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt2Ack             1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt3MacCmd         3
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt3MacCmd          1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt4Reserved       4
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt4Reserved        1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt5Reserved       5
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt5Reserved        1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt6Reserved       6
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt6Reserved        1
+#define _BITPOS_CMD_IEEE_RX_frameTypes_bAcceptFt7Reserved       7
+#define _NBITS_CMD_IEEE_RX_frameTypes_bAcceptFt7Reserved        1
+#define _POSITION_CMD_IEEE_RX_ccaOpt                            27
+#define _TYPE_CMD_IEEE_RX_ccaOpt                                uint8_t
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaEnEnergy                  0
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaEnEnergy                   1
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaEnCorr                    1
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaEnCorr                     1
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaEnSync                    2
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaEnSync                     1
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaCorrOp                    3
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaCorrOp                     1
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaSyncOp                    4
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaSyncOp                     1
+#define _BITPOS_CMD_IEEE_RX_ccaOpt_ccaCorrThr                   5
+#define _NBITS_CMD_IEEE_RX_ccaOpt_ccaCorrThr                    2
+#define _POSITION_CMD_IEEE_RX_ccaRssiThr                        28
+#define _TYPE_CMD_IEEE_RX_ccaRssiThr                            int8_t
+#define _POSITION_CMD_IEEE_RX_numExtEntries                     30
+#define _TYPE_CMD_IEEE_RX_numExtEntries                         uint8_t
+#define _POSITION_CMD_IEEE_RX_numShortEntries                   31
+#define _TYPE_CMD_IEEE_RX_numShortEntries                       uint8_t
+#define _POSITION_CMD_IEEE_RX_pExtEntryList                     32
+#define _TYPE_CMD_IEEE_RX_pExtEntryList                         uint32_t*
+#define _POSITION_CMD_IEEE_RX_pShortEntryList                   36
+#define _TYPE_CMD_IEEE_RX_pShortEntryList                       uint32_t*
+#define _POSITION_CMD_IEEE_RX_localExtAddr                      40
+#define _TYPE_CMD_IEEE_RX_localExtAddr                          uint64_t
+#define _POSITION_CMD_IEEE_RX_localShortAddr                    48
+#define _TYPE_CMD_IEEE_RX_localShortAddr                        uint16_t
+#define _POSITION_CMD_IEEE_RX_localPanID                        50
+#define _TYPE_CMD_IEEE_RX_localPanID                            uint16_t
+#define _POSITION_CMD_IEEE_RX_endTrigger                        55
+#define _TYPE_CMD_IEEE_RX_endTrigger                            uint8_t
+#define _BITPOS_CMD_IEEE_RX_endTrigger_triggerType              0
+#define _NBITS_CMD_IEEE_RX_endTrigger_triggerType               4
+#define _BITPOS_CMD_IEEE_RX_endTrigger_bEnaCmd                  4
+#define _NBITS_CMD_IEEE_RX_endTrigger_bEnaCmd                   1
+#define _BITPOS_CMD_IEEE_RX_endTrigger_triggerNo                5
+#define _NBITS_CMD_IEEE_RX_endTrigger_triggerNo                 2
+#define _BITPOS_CMD_IEEE_RX_endTrigger_pastTrig                 7
+#define _NBITS_CMD_IEEE_RX_endTrigger_pastTrig                  1
+#define _POSITION_CMD_IEEE_RX_endTime                           56
+#define _TYPE_CMD_IEEE_RX_endTime                               ratmr_t
+#define _SIZEOF_CMD_IEEE_RX                                     60
+
+#define _POSITION_CMD_IEEE_ED_SCAN_channel                      14
+#define _TYPE_CMD_IEEE_ED_SCAN_channel                          uint8_t
+#define _POSITION_CMD_IEEE_ED_SCAN_ccaOpt                       15
+#define _TYPE_CMD_IEEE_ED_SCAN_ccaOpt                           uint8_t
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnEnergy             0
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnEnergy              1
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnCorr               1
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnCorr                1
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnSync               2
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaEnSync                1
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaCorrOp               3
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaCorrOp                1
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaSyncOp               4
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaSyncOp                1
+#define _BITPOS_CMD_IEEE_ED_SCAN_ccaOpt_ccaCorrThr              5
+#define _NBITS_CMD_IEEE_ED_SCAN_ccaOpt_ccaCorrThr               2
+#define _POSITION_CMD_IEEE_ED_SCAN_ccaRssiThr                   16
+#define _TYPE_CMD_IEEE_ED_SCAN_ccaRssiThr                       int8_t
+#define _POSITION_CMD_IEEE_ED_SCAN_maxRssi                      18
+#define _TYPE_CMD_IEEE_ED_SCAN_maxRssi                          int8_t
+#define _POSITION_CMD_IEEE_ED_SCAN_endTrigger                   19
+#define _TYPE_CMD_IEEE_ED_SCAN_endTrigger                       uint8_t
+#define _BITPOS_CMD_IEEE_ED_SCAN_endTrigger_triggerType         0
+#define _NBITS_CMD_IEEE_ED_SCAN_endTrigger_triggerType          4
+#define _BITPOS_CMD_IEEE_ED_SCAN_endTrigger_bEnaCmd             4
+#define _NBITS_CMD_IEEE_ED_SCAN_endTrigger_bEnaCmd              1
+#define _BITPOS_CMD_IEEE_ED_SCAN_endTrigger_triggerNo           5
+#define _NBITS_CMD_IEEE_ED_SCAN_endTrigger_triggerNo            2
+#define _BITPOS_CMD_IEEE_ED_SCAN_endTrigger_pastTrig            7
+#define _NBITS_CMD_IEEE_ED_SCAN_endTrigger_pastTrig             1
+#define _POSITION_CMD_IEEE_ED_SCAN_endTime                      20
+#define _TYPE_CMD_IEEE_ED_SCAN_endTime                          ratmr_t
+#define _SIZEOF_CMD_IEEE_ED_SCAN                                24
+
+#define _POSITION_CMD_IEEE_TX_txOpt                             14
+#define _TYPE_CMD_IEEE_TX_txOpt                                 uint8_t
+#define _BITPOS_CMD_IEEE_TX_txOpt_bIncludePhyHdr                0
+#define _NBITS_CMD_IEEE_TX_txOpt_bIncludePhyHdr                 1
+#define _BITPOS_CMD_IEEE_TX_txOpt_bIncludeCrc                   1
+#define _NBITS_CMD_IEEE_TX_txOpt_bIncludeCrc                    1
+#define _BITPOS_CMD_IEEE_TX_txOpt_payloadLenMsb                 3
+#define _NBITS_CMD_IEEE_TX_txOpt_payloadLenMsb                  5
+#define _POSITION_CMD_IEEE_TX_payloadLen                        15
+#define _TYPE_CMD_IEEE_TX_payloadLen                            uint8_t
+#define _POSITION_CMD_IEEE_TX_pPayload                          16
+#define _TYPE_CMD_IEEE_TX_pPayload                              uint8_t*
+#define _POSITION_CMD_IEEE_TX_timeStamp                         20
+#define _TYPE_CMD_IEEE_TX_timeStamp                             ratmr_t
+#define _SIZEOF_CMD_IEEE_TX                                     24
+
+#define _POSITION_CMD_IEEE_CSMA_randomState                     14
+#define _TYPE_CMD_IEEE_CSMA_randomState                         uint16_t
+#define _POSITION_CMD_IEEE_CSMA_macMaxBE                        16
+#define _TYPE_CMD_IEEE_CSMA_macMaxBE                            uint8_t
+#define _POSITION_CMD_IEEE_CSMA_macMaxCSMABackoffs              17
+#define _TYPE_CMD_IEEE_CSMA_macMaxCSMABackoffs                  uint8_t
+#define _POSITION_CMD_IEEE_CSMA_csmaConfig                      18
+#define _TYPE_CMD_IEEE_CSMA_csmaConfig                          uint8_t
+#define _BITPOS_CMD_IEEE_CSMA_csmaConfig_initCW                 0
+#define _NBITS_CMD_IEEE_CSMA_csmaConfig_initCW                  5
+#define _BITPOS_CMD_IEEE_CSMA_csmaConfig_bSlotted               5
+#define _NBITS_CMD_IEEE_CSMA_csmaConfig_bSlotted                1
+#define _BITPOS_CMD_IEEE_CSMA_csmaConfig_rxOffMode              6
+#define _NBITS_CMD_IEEE_CSMA_csmaConfig_rxOffMode               2
+#define _POSITION_CMD_IEEE_CSMA_NB                              19
+#define _TYPE_CMD_IEEE_CSMA_NB                                  uint8_t
+#define _POSITION_CMD_IEEE_CSMA_BE                              20
+#define _TYPE_CMD_IEEE_CSMA_BE                                  uint8_t
+#define _POSITION_CMD_IEEE_CSMA_remainingPeriods                21
+#define _TYPE_CMD_IEEE_CSMA_remainingPeriods                    uint8_t
+#define _POSITION_CMD_IEEE_CSMA_lastRssi                        22
+#define _TYPE_CMD_IEEE_CSMA_lastRssi                            int8_t
+#define _POSITION_CMD_IEEE_CSMA_endTrigger                      23
+#define _TYPE_CMD_IEEE_CSMA_endTrigger                          uint8_t
+#define _BITPOS_CMD_IEEE_CSMA_endTrigger_triggerType            0
+#define _NBITS_CMD_IEEE_CSMA_endTrigger_triggerType             4
+#define _BITPOS_CMD_IEEE_CSMA_endTrigger_bEnaCmd                4
+#define _NBITS_CMD_IEEE_CSMA_endTrigger_bEnaCmd                 1
+#define _BITPOS_CMD_IEEE_CSMA_endTrigger_triggerNo              5
+#define _NBITS_CMD_IEEE_CSMA_endTrigger_triggerNo               2
+#define _BITPOS_CMD_IEEE_CSMA_endTrigger_pastTrig               7
+#define _NBITS_CMD_IEEE_CSMA_endTrigger_pastTrig                1
+#define _POSITION_CMD_IEEE_CSMA_lastTimeStamp                   24
+#define _TYPE_CMD_IEEE_CSMA_lastTimeStamp                       ratmr_t
+#define _POSITION_CMD_IEEE_CSMA_endTime                         28
+#define _TYPE_CMD_IEEE_CSMA_endTime                             ratmr_t
+#define _SIZEOF_CMD_IEEE_CSMA                                   32
+
+#define _POSITION_CMD_IEEE_RX_ACK_seqNo                         14
+#define _TYPE_CMD_IEEE_RX_ACK_seqNo                             uint8_t
+#define _POSITION_CMD_IEEE_RX_ACK_endTrigger                    15
+#define _TYPE_CMD_IEEE_RX_ACK_endTrigger                        uint8_t
+#define _BITPOS_CMD_IEEE_RX_ACK_endTrigger_triggerType          0
+#define _NBITS_CMD_IEEE_RX_ACK_endTrigger_triggerType           4
+#define _BITPOS_CMD_IEEE_RX_ACK_endTrigger_bEnaCmd              4
+#define _NBITS_CMD_IEEE_RX_ACK_endTrigger_bEnaCmd               1
+#define _BITPOS_CMD_IEEE_RX_ACK_endTrigger_triggerNo            5
+#define _NBITS_CMD_IEEE_RX_ACK_endTrigger_triggerNo             2
+#define _BITPOS_CMD_IEEE_RX_ACK_endTrigger_pastTrig             7
+#define _NBITS_CMD_IEEE_RX_ACK_endTrigger_pastTrig              1
+#define _POSITION_CMD_IEEE_RX_ACK_endTime                       16
+#define _TYPE_CMD_IEEE_RX_ACK_endTime                           ratmr_t
+#define _SIZEOF_CMD_IEEE_RX_ACK                                 20
+
+#define _SIZEOF_CMD_IEEE_ABORT_BG                               14
+
+#define _POSITION_CMD_IEEE_MOD_CCA_newCcaOpt                    2
+#define _TYPE_CMD_IEEE_MOD_CCA_newCcaOpt                        uint8_t
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnEnergy          0
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnEnergy           1
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnCorr            1
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnCorr             1
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnSync            2
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaEnSync             1
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaCorrOp            3
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaCorrOp             1
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaSyncOp            4
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaSyncOp             1
+#define _BITPOS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaCorrThr           5
+#define _NBITS_CMD_IEEE_MOD_CCA_newCcaOpt_ccaCorrThr            2
+#define _POSITION_CMD_IEEE_MOD_CCA_newCcaRssiThr                3
+#define _TYPE_CMD_IEEE_MOD_CCA_newCcaRssiThr                    int8_t
+#define _SIZEOF_CMD_IEEE_MOD_CCA                                4
+
+#define _POSITION_CMD_IEEE_MOD_FILT_newFrameFiltOpt             2
+#define _TYPE_CMD_IEEE_MOD_FILT_newFrameFiltOpt                 uint16_t
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_frameFiltEn   0
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_frameFiltEn    1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_frameFiltStop 1
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_frameFiltStop  1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_autoAckEn     2
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_autoAckEn      1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_slottedAckEn  3
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_slottedAckEn   1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_autoPendEn    4
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_autoPendEn     1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_defaultPend   5
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_defaultPend    1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bPendDataReqOnly 6
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bPendDataReqOnly 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bPanCoord     7
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bPanCoord      1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_maxFrameVersion 8
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_maxFrameVersion 2
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_fcfReservedMask 10
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_fcfReservedMask 3
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_modifyFtFilter 13
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_modifyFtFilter 2
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bStrictLenFilter 15
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameFiltOpt_bStrictLenFilter 1
+#define _POSITION_CMD_IEEE_MOD_FILT_newFrameTypes               4
+#define _TYPE_CMD_IEEE_MOD_FILT_newFrameTypes                   uint8_t
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt0Beacon 0
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt0Beacon 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt1Data  1
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt1Data   1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt2Ack   2
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt2Ack    1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt3MacCmd 3
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt3MacCmd 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt4Reserved 4
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt4Reserved 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt5Reserved 5
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt5Reserved 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt6Reserved 6
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt6Reserved 1
+#define _BITPOS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt7Reserved 7
+#define _NBITS_CMD_IEEE_MOD_FILT_newFrameTypes_bAcceptFt7Reserved 1
+#define _SIZEOF_CMD_IEEE_MOD_FILT                               5
+
+#define _POSITION_CMD_IEEE_MOD_SRC_MATCH_options                2
+#define _TYPE_CMD_IEEE_MOD_SRC_MATCH_options                    uint8_t
+#define _BITPOS_CMD_IEEE_MOD_SRC_MATCH_options_bEnable          0
+#define _NBITS_CMD_IEEE_MOD_SRC_MATCH_options_bEnable           1
+#define _BITPOS_CMD_IEEE_MOD_SRC_MATCH_options_srcPend          1
+#define _NBITS_CMD_IEEE_MOD_SRC_MATCH_options_srcPend           1
+#define _BITPOS_CMD_IEEE_MOD_SRC_MATCH_options_entryType        2
+#define _NBITS_CMD_IEEE_MOD_SRC_MATCH_options_entryType         1
+#define _POSITION_CMD_IEEE_MOD_SRC_MATCH_entryNo                3
+#define _TYPE_CMD_IEEE_MOD_SRC_MATCH_entryNo                    uint8_t
+#define _SIZEOF_CMD_IEEE_MOD_SRC_MATCH                          4
+
+#define _SIZEOF_CMD_IEEE_ABORT_FG                               2
+
+#define _SIZEOF_CMD_IEEE_STOP_FG                                2
+
+#define _POSITION_CMD_IEEE_CCA_REQ_currentRssi                  2
+#define _TYPE_CMD_IEEE_CCA_REQ_currentRssi                      int8_t
+#define _POSITION_CMD_IEEE_CCA_REQ_maxRssi                      3
+#define _TYPE_CMD_IEEE_CCA_REQ_maxRssi                          int8_t
+#define _POSITION_CMD_IEEE_CCA_REQ_ccaInfo                      4
+#define _TYPE_CMD_IEEE_CCA_REQ_ccaInfo                          uint8_t
+#define _BITPOS_CMD_IEEE_CCA_REQ_ccaInfo_ccaState               0
+#define _NBITS_CMD_IEEE_CCA_REQ_ccaInfo_ccaState                2
+#define _BITPOS_CMD_IEEE_CCA_REQ_ccaInfo_ccaEnergy              2
+#define _NBITS_CMD_IEEE_CCA_REQ_ccaInfo_ccaEnergy               2
+#define _BITPOS_CMD_IEEE_CCA_REQ_ccaInfo_ccaCorr                4
+#define _NBITS_CMD_IEEE_CCA_REQ_ccaInfo_ccaCorr                 2
+#define _BITPOS_CMD_IEEE_CCA_REQ_ccaInfo_ccaSync                6
+#define _NBITS_CMD_IEEE_CCA_REQ_ccaInfo_ccaSync                 1
+#define _SIZEOF_CMD_IEEE_CCA_REQ                                5
+
+#define _POSITION_ieeeRxOutput_nTxAck                           0
+#define _TYPE_ieeeRxOutput_nTxAck                               uint8_t
+#define _POSITION_ieeeRxOutput_nRxBeacon                        1
+#define _TYPE_ieeeRxOutput_nRxBeacon                            uint8_t
+#define _POSITION_ieeeRxOutput_nRxData                          2
+#define _TYPE_ieeeRxOutput_nRxData                              uint8_t
+#define _POSITION_ieeeRxOutput_nRxAck                           3
+#define _TYPE_ieeeRxOutput_nRxAck                               uint8_t
+#define _POSITION_ieeeRxOutput_nRxMacCmd                        4
+#define _TYPE_ieeeRxOutput_nRxMacCmd                            uint8_t
+#define _POSITION_ieeeRxOutput_nRxReserved                      5
+#define _TYPE_ieeeRxOutput_nRxReserved                          uint8_t
+#define _POSITION_ieeeRxOutput_nRxNok                           6
+#define _TYPE_ieeeRxOutput_nRxNok                               uint8_t
+#define _POSITION_ieeeRxOutput_nRxIgnored                       7
+#define _TYPE_ieeeRxOutput_nRxIgnored                           uint8_t
+#define _POSITION_ieeeRxOutput_nRxBufFull                       8
+#define _TYPE_ieeeRxOutput_nRxBufFull                           uint8_t
+#define _POSITION_ieeeRxOutput_lastRssi                         9
+#define _TYPE_ieeeRxOutput_lastRssi                             int8_t
+#define _POSITION_ieeeRxOutput_maxRssi                          10
+#define _TYPE_ieeeRxOutput_maxRssi                              int8_t
+#define _POSITION_ieeeRxOutput_beaconTimeStamp                  12
+#define _TYPE_ieeeRxOutput_beaconTimeStamp                      ratmr_t
+#define _SIZEOF_ieeeRxOutput                                    16
+
+#define _POSITION_shortAddrEntry_shortAddr                      0
+#define _TYPE_shortAddrEntry_shortAddr                          uint16_t
+#define _POSITION_shortAddrEntry_panId                          2
+#define _TYPE_shortAddrEntry_panId                              uint16_t
+#define _SIZEOF_shortAddrEntry                                  4
+
+#define _POSITION_ieeeRxCorrCrc_status                          0
+#define _TYPE_ieeeRxCorrCrc_status                              uint8_t
+#define _BITPOS_ieeeRxCorrCrc_status_corr                       0
+#define _NBITS_ieeeRxCorrCrc_status_corr                        6
+#define _BITPOS_ieeeRxCorrCrc_status_bIgnore                    6
+#define _NBITS_ieeeRxCorrCrc_status_bIgnore                     1
+#define _BITPOS_ieeeRxCorrCrc_status_bCrcErr                    7
+#define _NBITS_ieeeRxCorrCrc_status_bCrcErr                     1
+#define _SIZEOF_ieeeRxCorrCrc                                   1
+
+#endif

cpu/cc26xx/dev/rfc-api/ieee_mailbox.h

@@ -0,0 +1,107 @@
+/******************************************************************************
+*  Filename:       ieee_mailbox.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    Definitions for IEEE 802.15.4 interface
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef _IEEE_MAILBOX_H
+#define _IEEE_MAILBOX_H
+
+#include "mailbox.h"
+
+/// \name CPE interrupt definitions for IEEE 802.15.4
+/// Interrupt masks for the CPE interrupt in RDBELL. These are new names for interrupts in mailbox.h,
+/// used for compartibility with previous versions with separate interrupt numbers.
+///@{
+#define IRQN_IEEE_BG_COMMAND_SUSPENDED IRQN_BG_COMMAND_SUSPENDED
+#define IRQN_IEEE_TX_FRAME             IRQN_TX_DONE
+#define IRQN_IEEE_TX_ACK               IRQN_TX_ACK
+
+#define IRQN_IEEE_RX_FRAME             IRQN_RX_OK
+#define IRQN_IEEE_RX_NOK               IRQN_RX_NOK
+#define IRQN_IEEE_RX_IGNORED           IRQN_RX_IGNORED
+#define IRQN_IEEE_RX_BUF_FULL          IRQN_RX_BUF_FULL
+#define IRQN_IEEE_RX_ENTRY_DONE        IRQN_RX_ENTRY_DONE
+
+#define IRQ_IEEE_BG_COMMAND_SUSPENDED  (1U << IRQN_IEEE_BG_COMMAND_SUSPENDED)
+#define IRQ_IEEE_TX_FRAME              (1U << IRQN_IEEE_TX_FRAME)
+#define IRQ_IEEE_TX_ACK                (1U << IRQN_IEEE_TX_ACK)
+#define IRQ_IEEE_RX_FRAME              (1U << IRQN_IEEE_RX_FRAME)
+#define IRQ_IEEE_RX_NOK                (1U << IRQN_IEEE_RX_NOK)
+#define IRQ_IEEE_RX_IGNORED            (1U << IRQN_IEEE_RX_IGNORED)
+#define IRQ_IEEE_RX_BUF_FULL           (1U << IRQN_IEEE_RX_BUF_FULL)
+#define IRQ_IEEE_RX_ENTRY_DONE         (1U << IRQN_IEEE_RX_ENTRY_DONE)
+///@}
+
+
+
+/// \name Radio operation status
+/// Radio operation status format:
+/// Bits 15:12: Protocol
+///             0010: IEEE 802.15.4
+/// Bits 11:10: Type
+///             00: Not finished
+///             01: Done successfully
+///             10: Done with error
+/// Bits 9:0:   Identifier
+
+/// \name Operation not finished
+///@{
+#define IEEE_SUSPENDED          0x2001  ///< Operation suspended
+///@}
+/// \name Operation finished normally
+///@{
+#define IEEE_DONE_OK            0x2400  ///< Operation ended normally
+#define IEEE_DONE_BUSY          0x2401  ///< CSMA-CA operation ended with failure
+#define IEEE_DONE_STOPPED       0x2402  ///< Operation stopped after stop command
+#define IEEE_DONE_ACK           0x2403  ///< ACK packet received with pending data bit cleared
+#define IEEE_DONE_ACKPEND       0x2404  ///< ACK packet received with pending data bit set
+#define IEEE_DONE_TIMEOUT       0x2405  ///< Operation ended due to timeout
+#define IEEE_DONE_BGEND         0x2406  ///< FG operation ended because necessary background level
+                                        ///< operation ended 
+#define IEEE_DONE_ABORT         0x2407  ///< Operation aborted by command
+///@}
+/// \name Operation finished with error
+///@{
+#define IEEE_ERROR_PAR          0x2800  ///< Illegal parameter
+#define IEEE_ERROR_NO_SETUP     0x2801  ///< Operation using Rx or Tx attemted when not in 15.4 mode
+#define IEEE_ERROR_NO_FS        0x2802  ///< Operation using Rx or Tx attemted without frequency synth configured
+#define IEEE_ERROR_SYNTH_PROG   0x2803  ///< Synthesizer programming failed to complete on time
+#define IEEE_ERROR_RXOVF        0x2804  ///< Receiver overflowed during operation
+#define IEEE_ERROR_TXUNF        0x2805  ///< Transmitter underflowed during operation
+///@}
+///@}
+
+#endif

cpu/cc26xx/dev/rfc-api/mailbox.h

@@ -0,0 +1,580 @@
+/******************************************************************************
+*  Filename:       mailbox.h
+*  Revised:        $ $
+*  Revision:       $ $
+*
+*  Description:    Definitions for interface between system and radio CPU
+*
+*  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions
+*  are met:
+*
+*    Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*
+*    Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*
+*    Neither the name of Texas Instruments Incorporated nor the names of
+*    its contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*
+*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#ifndef _MAILBOX_H
+#define _MAILBOX_H
+
+#include <stdint.h>
+#include <string.h>
+
+/// Type definition for RAT
+typedef uint32_t ratmr_t;
+
+
+
+/// Type definition for a data queue
+typedef struct {
+   uint8_t *pCurrEntry;   ///< Pointer to the data queue entry to be used, NULL for an empty queue
+   uint8_t *pLastEntry;   ///< Pointer to the last entry in the queue, NULL for a circular queue
+} dataQueue_t;
+
+
+
+/// \name CPE interrupt definitions
+/// Interrupt masks for the CPE interrupt in RDBELL. 
+///@{
+#define IRQN_COMMAND_DONE           0           ///< Radio operation command finished
+#define IRQN_LAST_COMMAND_DONE      1           ///< Last radio operation command in a chain finished
+#define IRQN_FG_COMMAND_DONE        2           ///< FG level Radio operation command finished
+#define IRQN_LAST_FG_COMMAND_DONE   3           ///< Last FG level radio operation command in a chain finished
+#define IRQN_TX_DONE                4           ///< Packet transmitted
+#define IRQN_TX_ACK                 5           ///< ACK packet transmitted
+#define IRQN_TX_CTRL                6           ///< Control packet transmitted
+#define IRQN_TX_CTRL_ACK            7           ///< Acknowledgement received on a transmitted control packet
+#define IRQN_TX_CTRL_ACK_ACK        8           ///< Acknowledgement received on a transmitted control packet, and acknowledgement transmitted for that packet
+#define IRQN_TX_RETRANS             9           ///< Packet retransmitted
+#define IRQN_TX_ENTRY_DONE          10          ///< Tx queue data entry state changed to Finished
+#define IRQN_TX_BUFFER_CHANGED      11          ///< A buffer change is complete
+#define IRQN_BG_COMMAND_SUSPENDED   12          ///< A background level radio operation command has been suspended
+#define IRQN_RX_OK                  16          ///< Packet received with CRC OK, payload, and not to be ignored
+#define IRQN_RX_NOK                 17          ///< Packet received with CRC error
+#define IRQN_RX_IGNORED             18          ///< Packet received with CRC OK, but to be ignored
+#define IRQN_RX_EMPTY               19          ///< Packet received with CRC OK, not to be ignored, no payload
+#define IRQN_RX_CTRL                20          ///< Control packet received with CRC OK, not to be ignored
+#define IRQN_RX_CTRL_ACK            21          ///< Control packet received with CRC OK, not to be ignored, then ACK sent
+#define IRQN_RX_BUF_FULL            22          ///< Packet received that did not fit in the Rx queue
+#define IRQN_RX_ENTRY_DONE          23          ///< Rx queue data entry changing state to Finished
+#define IRQN_RX_DATA_WRITTEN        24          ///< Data written to partial read Rx buffer
+#define IRQN_RX_N_DATA_WRITTEN      25          ///< Specified number of bytes written to partial read Rx buffer
+#define IRQN_RX_ABORTED             26          ///< Packet reception stopped before packet was done
+#define IRQN_SYNTH_NO_LOCK          28          ///< The synth has gone out of lock after calibration
+#define IRQN_MODULES_UNLOCKED       29          ///< As part of the boot process, the CM0 has opened access to RF core modules and memories
+#define IRQN_BOOT_DONE              30          ///< The RF core CPU boot is finished
+
+#define IRQN_INTERNAL_ERROR         31          ///< Internal error observed
+
+#define IRQ_COMMAND_DONE            (1U << IRQN_COMMAND_DONE)
+#define IRQ_LAST_COMMAND_DONE       (1U << IRQN_LAST_COMMAND_DONE)
+#define IRQ_FG_COMMAND_DONE         (1U << IRQN_FG_COMMAND_DONE)
+#define IRQ_LAST_FG_COMMAND_DONE    (1U << IRQN_LAST_FG_COMMAND_DONE)
+
+#define IRQ_TX_DONE                 (1U << IRQN_TX_DONE)
+#define IRQ_TX_ACK                  (1U << IRQN_TX_ACK)
+#define IRQ_TX_CTRL                 (1U << IRQN_TX_CTRL)
+#define IRQ_TX_CTRL_ACK             (1U << IRQN_TX_CTRL_ACK)
+#define IRQ_TX_CTRL_ACK_ACK         (1U << IRQN_TX_CTRL_ACK_ACK)
+#define IRQ_TX_RETRANS              (1U << IRQN_TX_RETRANS)
+
+#define IRQ_TX_ENTRY_DONE           (1U << IRQN_TX_ENTRY_DONE)
+#define IRQ_TX_BUFFER_CHANGED       (1U << IRQN_TX_BUFFER_CHANGED)
+
+#define IRQ_BG_COMMAND_SUSPENDED    (1U << IRQN_BG_COMMAND_SUSPENDED)
+
+#define IRQ_RX_OK                   (1U << IRQN_RX_OK)
+#define IRQ_RX_NOK                  (1U << IRQN_RX_NOK)
+#define IRQ_RX_IGNORED              (1U << IRQN_RX_IGNORED)
+#define IRQ_RX_EMPTY                (1U << IRQN_RX_EMPTY)
+#define IRQ_RX_CTRL                 (1U << IRQN_RX_CTRL)
+#define IRQ_RX_CTRL_ACK             (1U << IRQN_RX_CTRL_ACK)
+#define IRQ_RX_BUF_FULL             (1U << IRQN_RX_BUF_FULL)
+#define IRQ_RX_ENTRY_DONE           (1U << IRQN_RX_ENTRY_DONE)
+#define IRQ_RX_DATA_WRITTEN         (1U << IRQN_RX_DATA_WRITTEN)
+#define IRQ_RX_N_DATA_WRITTEN       (1U << IRQN_RX_N_DATA_WRITTEN)
+#define IRQ_RX_ABORTED              (1U << IRQN_RX_ABORTED)
+
+#define IRQ_SYNTH_NO_LOCK           (1U << IRQN_SYNTH_NO_LOCK)
+#define IRQ_MODULES_UNLOCKED        (1U << IRQN_MODULES_UNLOCKED)
+#define IRQ_BOOT_DONE               (1U << IRQN_BOOT_DONE)
+#define IRQ_INTERNAL_ERROR          (1U << IRQN_INTERNAL_ERROR)
+///@}
+
+
+
+/// \name CMDSTA values
+/// Values returned in result byte of CMDSTA
+///@{
+#define CMDSTA_Pending 0x00              ///< The command has not yet been parsed
+#define CMDSTA_Done 0x01                 ///< Command successfully parsed
+
+#define CMDSTA_IllegalPointer 0x81       ///< The pointer signaled in CMDR is not valid
+#define CMDSTA_UnknownCommand 0x82       ///< The command number in the command structure is unknown
+#define CMDSTA_UnknownDirCommand 0x83    ///< The command number for a direct command is unknown, or the
+                                         ///< command is not a direct command
+#define CMDSTA_ContextError 0x85         ///< An immediate or direct command was issued in a context
+                                         ///< where it is not supported
+#define CMDSTA_SchedulingError 0x86      ///< A radio operation command was attempted to be scheduled
+                                         ///< while another operation was already running in the RF core
+#define CMDSTA_ParError 0x87             ///< There were errors in the command parameters that are parsed
+                                         ///< on submission.
+#define CMDSTA_QueueError 0x88           ///< An operation on a data entry queue was attempted that was
+                                         ///< not supported by the queue in its current state
+#define CMDSTA_QueueBusy 0x89            ///< An operation on a data entry was attempted while that entry
+                                         ///< was busy
+///@}
+
+/// \name Macros for use with command definition files
+/// The script create_command.pl generates header files from command and structure definitions in the
+/// *_def.txt files. These are the macros to access the definitions
+///@{
+
+/// Get a field from a structure
+//
+/// Gets a field from a structure defined in a _def.txt file. This may be used both in assignments and
+/// references (e.g. GET_FIELD(pCmd1, CMD_TEST, testParam) = GET_FIELD(pCmd2, CMD_DUMMY, dummyParam);)
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the accessed field as defined in the _def.txt file
+///
+#define GET_FIELD(ptr, cmd, field) \
+(*((_TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field))))
+
+/// Get a field from a structure, reading as volatile
+//
+/// Gets a field from a structure defined in a _def.txt file, reading it as a volatile parameter, which
+/// takes into account that it may be changed by the other side. This may be used both in assignments and
+/// references (e.g. GET_FIELD(pCmd1, CMD_TEST, testParam) = GET_FIELD(pCmd2, CMD_DUMMY, dummyParam);)
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the accessed field as defined in the _def.txt file
+///
+#define GET_FIELD_V(ptr, cmd, field) \
+(*((volatile _TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field))))
+
+/// Get the pointer to a field from a structure
+//
+/// Gets the pointer to a field from a structure defined in a _def.txt file.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the accessed field as defined in the _def.txt file
+///
+#define GET_FIELD_PTR(ptr, cmd, field) \
+((_TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))
+
+/// Get the volatile pointer to a field from a structure
+//
+/// Gets the volatile pointer to a field from a structure defined in a _def.txt file.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the accessed field as defined in the _def.txt file
+///
+#define GET_FIELD_VPTR(ptr, cmd, field) \
+((volatile _TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))
+
+/// Get bits from a bit field
+//
+/// Returns bits from a bit field defined in a _def.txt file.
+/// \param[in]  value
+///     The value of the entire field that contains the bit field
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+///
+#define GET_BITS(value, cmd, field, bitfield) \
+(((value) >> (_BITPOS_##cmd##_##field##_##bitfield)) & \
+            ((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1))
+
+/// Get bits from a bit field as a signed value
+//
+/// Returns sign extended bits from a bit field defined in a _def.txt file.
+/// \param[in]  value
+///     The value of the entire field that contains the bit field
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+///
+#define GET_BITS_S(value, cmd, field, bitfield) \
+(((int)(value) << (32 - ((_BITPOS_##cmd##_##field##_##bitfield) + (_NBITS_##cmd##_##field##_##bitfield)))) >> \
+                    (32 - (_NBITS_##cmd##_##field##_##bitfield)))
+
+/// Set bits in a bit field
+//
+/// Modifies a bit field defined in a _def.txt file.
+/// \param[in,out]  value
+///     The value of the entire field that contains the bit field
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+/// \param[in]  bvalue
+///     The value to set in the bitfield
+///
+#define SET_BITS(value, cmd, field, bitfield, bvalue) \
+(((value) = ((value) & \
+   (~(((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1) << (_BITPOS_##cmd##_##field##_##bitfield))) | \
+   ((bvalue) << (_BITPOS_##cmd##_##field##_##bitfield)))))
+
+
+/// Get bits from a bit field in a structure
+//
+/// Returns bits from a bit field in a structure defined in a _def.txt file.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+///
+#define GET_BITFIELD(ptr, cmd, field, bitfield) \
+((*((_TYPE_##cmd##_##field *) ((((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) >> \
+   ((_BITPOS_##cmd##_##field##_##bitfield)))  & \
+   ((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1))
+
+/// Get bits from a bit field in a structure, reading as volatile
+//
+/// Returns bits from a bit field in a structure defined in a _def.txt file, reading it as a
+/// volatile parameter.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+///
+#define GET_BITFIELD_V(ptr, cmd, field, bitfield) \
+((*((volatile _TYPE_##cmd##_##field *) ((((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) >> \
+   ((_BITPOS_##cmd##_##field##_##bitfield)))  & \
+   ((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1))
+
+
+/// Set bits in a bit field in a structure
+//
+/// Modifies a bit field in a field in a structure defined in a _def.txt file.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+/// \param[in]  value
+///     The value to set in the bitfield
+///
+#define SET_BITFIELD(ptr, cmd, field, bitfield, value) \
+((*((_TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) = \
+   ((*((_TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) & \
+   (~(((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1) << (_BITPOS_##cmd##_##field##_##bitfield))) | \
+   (((uint32_t)(value)) << (_BITPOS_##cmd##_##field##_##bitfield))))
+
+/// Set bits in a bit field in a structure, reading and writing as volatile
+//
+/// Modifies a bit field in a field in a structure defined in a _def.txt file, accessing it as a volatile
+/// parameter.
+/// \param[in]  ptr
+///     Pointer to the structure
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+/// \param[in]  value
+///     The value to set in the bitfield
+///
+#define SET_BITFIELD_V(ptr, cmd, field, bitfield, value) \
+((*((volatile _TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) = \
+   ((*((volatile _TYPE_##cmd##_##field *) (((uint8_t *)(ptr)) + (_POSITION_##cmd##_##field)))) & \
+   (~(((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1) << (_BITPOS_##cmd##_##field##_##bitfield))) | \
+   (((uint32_t)(value)) << (_BITPOS_##cmd##_##field##_##bitfield))))
+
+/// Get the value of specific bifield in a field with the remaining bits set to 0
+//
+/// Returns a bitfield so that the value of the full field can be obtained by bitwise
+/// OR between these
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  field
+///     Name of the field that contains the bit field definition as defined in the _def.txt file
+/// \param[in]  bitfield
+///     Name of the bitfield as defined in the _def.txt file
+/// \param[in]  value
+///     The value to use in the bitfield
+///
+#define BITVALUE(cmd, field, bitfield, value) \
+((((uint32_t)(value)) & ((1U << (_NBITS_##cmd##_##field##_##bitfield)) - 1)) << \
+ (_BITPOS_##cmd##_##field##_##bitfield))
+
+/// Get the size of a structure
+//
+/// Gets the size of a structure defined in a _def.txt file.
+///
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+///
+#define SIZEOF_STRUCT(cmd) \
+(_SIZEOF_##cmd)
+
+/// Get the size of a radio operation command structure
+//
+/// Gets the size of a radio operation command structure defined in a _def.txt file. The difference from
+/// SIZEOF_STRUCT is for legacy reasons only.
+///
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+///
+#define SIZEOF_RADIO_OP(cmd) \
+(_SIZEOF_##cmd)
+
+/// Initializes a structure to an initialization set
+//
+/// Sets the value of a structure to its given initialization values
+/// \param[in]  ptr
+///     Pointer to the structure, must be word aligned
+/// \param[in]  cmd
+///     Name of the command or structure as defined in the _def.txt file
+/// \param[in]  set
+///     Index of the set of initializations to use
+///
+#define INIT_STRUCT(ptr, cmd, set) \
+(memcpy(((uint32_t *)(ptr)) + (_START_INIT_WIDX_##cmd), (__init_##cmd[(set)]), \
+        (_N_INIT_WORDS_##cmd) * sizeof(uint32_t)))
+
+///@}
+
+
+/// \name Macros for sending direct commands
+///@{
+/// Direct command with no parameter
+#define CMDR_DIR_CMD(cmdId) (((cmdId) << 16) | 1)
+
+/// Direct command with 1-byte parameter
+#define CMDR_DIR_CMD_1BYTE(cmdId, par) (((cmdId) << 16) | ((par) << 8) | 1)
+
+/// Direct command with 2-byte parameter
+#define CMDR_DIR_CMD_2BYTE(cmdId, par) (((cmdId) << 16) | ((par) & 0xFFFC) | 1)
+
+///@}
+
+
+
+/// \name Definitions for trigger types
+///@{
+#define TRIG_NOW 0            ///< Triggers immediately
+#define TRIG_NEVER 1          ///< Never trigs
+#define TRIG_ABSTIME 2        ///< Trigs at an absolute time
+#define TRIG_REL_SUBMIT 3     ///< Trigs at a time relative to the command was submitted
+#define TRIG_REL_START 4      ///< Trigs at a time relative to the command started
+#define TRIG_REL_PREVSTART 5  ///< Trigs at a time relative to the previous command in the chain started
+#define TRIG_REL_FIRSTSTART 6 ///< Trigs at a time relative to the first command in the chain started
+#define TRIG_REL_PREVEND 7    ///< Trigs at a time relative to the previous command in the chain ended
+#define TRIG_REL_EVT1 8       ///< Trigs at a time relative to the context defined "Event 1"
+#define TRIG_REL_EVT2 9       ///< Trigs at a time relative to the context defined "Event 2"
+#define TRIG_EXTERNAL 10      ///< Trigs at an external event to the radio timer
+#define TRIG_PAST_BM 0x80     ///< Bitmask for setting pastTrig bit in order to trig immediately if
+                              ///< trigger happened in the past
+///@}
+
+
+/// \name Definitions for conditional execution
+///@{
+#define COND_ALWAYS 0         ///< Always run next command (except in case of Abort)
+#define COND_NEVER 1          ///< Never run next command
+#define COND_STOP_ON_FALSE 2  ///< Run next command if this command returned True, stop if it returned
+                              ///< False
+#define COND_STOP_ON_TRUE 3   ///< Stop if this command returned True, run next command if it returned
+                              ///< False
+#define COND_SKIP_ON_FALSE 4  ///< Run next command if this command returned True, skip a number of
+                              ///< commands if it returned False
+#define COND_SKIP_ON_TRUE 5   ///< Skip a number of commands if this command returned True, run next
+                              ///< command if it returned False
+///@}
+
+
+
+/// \name Radio operation status
+/// Radio operation status format:
+///@{
+/// \name Operation not finished
+///@{
+#define IDLE             0x0000   ///< Operation not started
+#define PENDING          0x0001   ///< Start of command is pending
+#define ACTIVE           0x0002   ///< Running
+#define SKIPPED          0x0003   ///< Operation skipped due to condition in another command
+///@}
+/// \name Operation finished normally
+///@{
+#define DONE_OK          0x0400   ///< Operation ended normally
+#define DONE_COUNTDOWN   0x0401   ///< Counter reached zero
+#define DONE_RXERR       0x0402   ///< Operation ended with CRC error
+#define DONE_TIMEOUT     0x0403   ///< Operation ended with timeout
+#define DONE_STOPPED     0x0404   ///< Operation stopped after CMD_STOP command
+#define DONE_ABORT       0x0405   ///< Operation aborted by CMD_ABORT command
+#define DONE_FAILED      0x0406   ///< Scheduled immediate command failed
+///@}
+/// \name Operation finished with error
+///@{
+#define ERROR_PAST_START 0x0800   ///< The start trigger occurred in the past
+#define ERROR_START_TRIG 0x0801   ///< Illegal start trigger parameter
+#define ERROR_CONDITION  0x0802   ///< Illegal condition for next operation
+#define ERROR_PAR        0x0803   ///< Error in a command specific parameter
+#define ERROR_POINTER    0x0804   ///< Invalid pointer to next operation
+#define ERROR_CMDID      0x0805   ///< Next operation has a command ID that is undefined or not a radio
+                                  ///< operation command
+#define ERROR_WRONG_BG   0x0806   ///< FG level command not compatible with running BG level command
+#define ERROR_NO_SETUP   0x0807   ///< Operation using Rx or Tx attemted without CMD_RADIO_SETUP
+#define ERROR_NO_FS      0x0808   ///< Operation using Rx or Tx attemted without frequency synth configured
+#define ERROR_SYNTH_PROG 0x0809   ///< Synthesizer calibration failed
+#define ERROR_TXUNF      0x080A   ///< Tx underflow observed
+#define ERROR_RXOVF      0x080B   ///< Rx overflow observed
+#define ERROR_NO_RX      0x080C   ///< Attempted to access data from Rx when no such data was yet received
+#define ERROR_PENDING    0x080D   ///< Command submitted in the future with another command at different level pending
+///@}
+///@}
+
+
+/// \name Data entry types
+///@{
+#define DATA_ENTRY_TYPE_GEN 0     ///< General type: Tx entry or single element Rx entry
+#define DATA_ENTRY_TYPE_MULTI 1   ///< Multi-element Rx entry type
+#define DATA_ENTRY_TYPE_PTR 2     ///< Pointer entry type
+#define DATA_ENTRY_TYPE_PARTIAL 3 ///< Partial read entry type
+///@
+
+
+/// \name Data entry statuses
+///@{
+#define DATA_ENTRY_PENDING 0      ///< Entry not yet used
+#define DATA_ENTRY_ACTIVE 1       ///< Entry in use by radio CPU
+#define DATA_ENTRY_BUSY 2         ///< Entry being updated
+#define DATA_ENTRY_FINISHED 3     ///< Radio CPU is finished accessing the entry
+#define DATA_ENTRY_UNFINISHED 4   ///< Radio CPU is finished accessing the entry, but packet could not be finished
+///@}
+
+/// Difference between length and size of rxData field in multi-element Rx entry
+#define DATA_ENTRY_MULTI_LEN_OFFSET (_POSITION_dataEntry_rxData - _POSITION_dataEntry_data)
+
+
+/// \name Macros for RF register override
+///@{
+/// Macro for ADI half-size value-mask combination
+#define ADI_VAL_MASK(addr, mask, value) \
+(((addr) & 1) ? (((mask) & 0x0F) | (((value) & 0x0F) << 4)) : \
+ ((((mask) & 0x0F) << 4) | ((value) & 0x0F)))
+/// 32-bit write of 16-bit value
+#define HW_REG_OVERRIDE(addr, val) ((((uintptr_t) (addr)) & 0xFFFC) | ((uint32_t)(val) << 16))
+/// ADI register, full-size write
+#define ADI_REG_OVERRIDE(adiNo, addr, val) (2 | ((uint32_t)(val) << 16) | \
+(((addr) & 0x3F) << 24) | (((adiNo) ? 1U : 0) << 31))
+/// 2 ADI registers, full-size write
+#define ADI_2REG_OVERRIDE(adiNo, addr, val, addr2, val2) \
+(2 | ((uint32_t)(val2) << 2) | (((addr2) & 0x3F) << 10) | ((uint32_t)(val) << 16) | \
+(((addr) & 0x3F) << 24) | (((adiNo) ? 1U : 0) << 31))
+/// ADI register, half-size read-modify-write
+#define ADI_HALFREG_OVERRIDE(adiNo, addr, mask, val) (2 | (ADI_VAL_MASK(addr, mask, val) << 16) | \
+(((addr) & 0x3F) << 24) | (1U << 30) | (((adiNo) ? 1U : 0) << 31))
+/// 2 ADI registers, half-size read-modify-write
+#define ADI_2HALFREG_OVERRIDE(adiNo, addr, mask, val, addr2, mask2, val2) \
+(2 | (ADI_VAL_MASK(addr2, mask2, val2) << 2) | (((addr2) & 0x3F) << 10) | \
+(ADI_VAL_MASK(addr, mask, val) << 16) | (((addr) & 0x3F) << 24) | (1U << 30) | (((adiNo) ? 1U : 0) << 31))
+
+/// 16-bit SW register as defined in radio_par_def.txt
+#define SW_REG_OVERRIDE(cmd, field, val) (3 | ((_POSITION_##cmd##_##field) << 4) | ((uint32_t)(val) << 16))
+/// SW register as defined in radio_par_def.txt with added index (for use with registers > 16 bits).
+#define SW_REG_IND_OVERRIDE(cmd, field, offset, val) (3 | \
+(((_POSITION_##cmd##_##field) + ((offset) << 1)) << 4) | ((uint32_t)(val) << 16))
+/// 8-bit SW register as defined in radio_par_def.txt
+#define SW_REG_BYTE_OVERRIDE(cmd, field, val) (0x8003 | ((_POSITION_##cmd##_##field) << 4) | \
+((uint32_t)(val) << 16))
+/// Two 8-bit SW registers as defined in radio_par_def.txt; the one given by field and the next byte.
+#define SW_REG_2BYTE_OVERRIDE(cmd, field, val0, val1) (3 | (((_POSITION_##cmd##_##field) & 0xFFFE) << 4) | \
+                                                       (((uint32_t)(val0) << 16) & 0x00FF0000) | ((uint32_t)(val1) << 24))
+#define HW16_ARRAY_OVERRIDE(addr, length) (1 | (((uintptr_t) (addr)) & 0xFFFC) | ((uint32_t)(length) << 16))
+#define HW32_ARRAY_OVERRIDE(addr, length) (1 | (((uintptr_t) (addr)) & 0xFFFC) | \
+((uint32_t)(length) << 16) | (1U << 30))
+#define ADI_ARRAY_OVERRIDE(adiNo, addr, bHalfSize, length) (1 | ((((addr) & 0x3F) << 2)) | \
+((!!(bHalfSize)) << 8) | ((!!(adiNo)) << 9) | ((uint32_t)(length) << 16) | (2U << 30))
+#define SW_ARRAY_OVERRIDE(cmd, firstfield, length) (1 | (((_POSITION_##cmd##_##firstfield)) << 2) | \
+((uint32_t)(length) << 16) | (3U << 30))
+#define MCE_RFE_OVERRIDE(bMceRam, mceRomBank, mceMode, bRfeRam, rfeRomBank, rfeMode) \
+   (7 | ((!!(bMceRam)) << 8) | (((mceRomBank) & 0x07) << 9) | ((!!(bRfeRam)) << 12) | (((rfeRomBank) & 0x07) << 13) | \
+    (((mceMode) & 0x00FF) << 16) | (((rfeMode) & 0x00FF) << 24))
+#define BAW_OVERRIDE(freqOffset) (0x000B | ((freqOffset) << 16))
+#define NEW_OVERRIDE_SEGMENT(address) (((((uintptr_t)(address)) & 0x03FFFFFC) << 6) | 0x000F | \
+   (((((uintptr_t)(address) >> 24) == 0x20) ? 0x01 : \
+     (((uintptr_t)(address) >> 24) == 0x21) ? 0x02 : \
+     (((uintptr_t)(address) >> 24) == 0xA0) ? 0x03 : \
+     (((uintptr_t)(address) >> 24) == 0x00) ? 0x04 : \
+     (((uintptr_t)(address) >> 24) == 0x10) ? 0x05 : \
+     (((uintptr_t)(address) >> 24) == 0x11) ? 0x06 : \
+     (((uintptr_t)(address) >> 24) == 0x40) ? 0x07 : \
+     (((uintptr_t)(address) >> 24) == 0x50) ? 0x08 : \
+     0x09) << 4)) // Use illegal value for illegal address range
+/// End of string for override register
+#define END_OVERRIDE 0xFFFFFFFF
+
+
+#define FWPAR_8BIT_ADDR(cmd, field) (0x1800 | (_POSITION_##cmd##_##field))
+#define FWPAR_16BIT_ADDR(cmd, field) (0x1000 | (_POSITION_##cmd##_##field))
+#define FWPAR_32BIT_ADDR(cmd, field) (0x0000 | (_POSITION_##cmd##_##field))
+
+/// ADI address-value pair
+#define ADI_ADDR_VAL(addr, value) ((((addr) & 0x7F) << 8) | ((value) & 0xFF))
+#define ADI_ADDR_VAL_MASK(addr, mask, value) ((((addr) & 0x7F) << 8) | ADI_VAL_MASK(addr, mask, value))
+
+/// Low half-word
+#define LOWORD(value) ((value) & 0xFFFF)
+/// High half-word
+#define HIWORD(value) ((value) >> 16)
+///@}
+
+
+#endif

cpu/cc26xx/dev/uart1.h

@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-uart
+ * @{
+ *
+ * \file
+ * This file really only exists because some examples rely on it.
+ *
+ * For instance, some examples do uart1_set_input(f). We re-write this to
+ * uart_set_input
+ */
+#ifndef UART1_H_
+#define UART1_H_
+
+#include "dev/cc26xx-uart.h"
+
+#define BAUD2UBR(x) x
+#define uart1_set_input(f) cc26xx_uart_set_input(f)
+
+#endif /* UART1_H_ */
+
+/** @} */

cpu/cc26xx/fault-handlers.c

@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#include "inc/hw_types.h"
+#include "inc/hw_memmap.h"
+#include "inc/hw_cpu_scs.h"
+/*---------------------------------------------------------------------------*/
+#define fault_handlers_hard_fault_isr FaultISR
+/*---------------------------------------------------------------------------*/
+void
+fault_handlers_hard_fault_isr(void)
+{
+  /*
+   * Workaround for (Im)precise Bus Faults caused under unknown circumstances,
+   * likely by access to RFC registers while the RF PD is off (which is
+   * something that should never happen because we do in fact check before
+   * accessing)
+   */
+  if((HWREG(CPU_SCS_BASE + CPU_SCS_O_CFSR) == CPU_SCS_CFSR_IMPRECISERR) ||
+     (HWREG(CPU_SCS_BASE + CPU_SCS_O_CFSR) & CPU_SCS_CFSR_PRECISERR)){
+    /* ToDo: Check BFARVALID and then BFAR to filter down even further */
+    return;
+  }
+
+  while(1);
+}
+/*---------------------------------------------------------------------------*/

cpu/cc26xx/ieee-addr.c

@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-ieee-addr
+ * @{
+ *
+ * \file
+ * Driver for the CC26xx IEEE addresses
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "net/linkaddr.h"
+#include "ieee-addr.h"
+
+#include <stdint.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+void
+ieee_addr_cpy_to(uint8_t *dst, uint8_t len)
+{
+  if(IEEE_ADDR_CONF_HARDCODED) {
+    uint8_t ieee_addr_hc[8] = IEEE_ADDR_CONF_ADDRESS;
+
+    memcpy(dst, &ieee_addr_hc[8 - len], len);
+  } else {
+    int i;
+
+    /* Reading from primary location... */
+    uint8_t *location = (uint8_t *)IEEE_ADDR_LOCATION_PRIMARY;
+
+    /*
+     * ...unless we can find a byte != 0xFF in secondary
+     *
+     * Intentionally checking all 8 bytes here instead of len, because we
+     * are checking validity of the entire IEEE address irrespective of the
+     * actual number of bytes the caller wants to copy over.
+     */
+    for(i = 0; i < 8; i++) {
+      if(((uint8_t *)IEEE_ADDR_LOCATION_SECONDARY)[i] != 0xFF) {
+        /* A byte in the secondary location is not 0xFF. Use the secondary */
+        location = (uint8_t *)IEEE_ADDR_LOCATION_SECONDARY;
+        break;
+      }
+    }
+
+    /*
+     * We have chosen what address to read the IEEE address from. Do so,
+     * inverting byte order
+     */
+    for(i = 0; i < len; i++) {
+      dst[i] = location[len - 1 - i];
+    }
+  }
+
+#if IEEE_ADDR_NODE_ID
+  dst[len - 1] = IEEE_ADDR_NODE_ID & 0xFF;
+  dst[len - 2] = IEEE_ADDR_NODE_ID >> 8;
+#endif
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

cpu/cc26xx/ieee-addr.h

@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-ieee-addr CC26xx IEEE Address Control
+ *
+ * Driver for the retrieval of an IEEE address from flash
+ *
+ * The user can specify a hardcoded IEEE address through the
+ * IEEE_ADDR_CONF_HARDCODED configuration macro.
+ *
+ * If the user does not hard-code an address, then one will be read from either
+ * the primary location (InfoPage) or from the secondary location (on flash).
+ *
+ * In order to allow the user to easily program nodes with addresses, the
+ * secondary location is given priority: If it contains a valid address then
+ * it will be chosen in favour of the one on InfoPage.
+ *
+ * In this context, an address is valid if at least one of the 8 bytes does not
+ * equal 0xFF. If all 8 bytes are 0xFF, then the primary location will be used.
+ *
+ * In all cases, the address is assumed to be written little-endian.
+ *
+ * Lastly, it is possible to override the 2 LSB's of the address by using the
+ * NODE_ID make variable.
+ * @{
+ *
+ * \file
+ * Header file with register and macro declarations for the cc26xx IEEE address
+ * driver
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef IEEE_ADDR_H_
+#define IEEE_ADDR_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/**
+ * \name IEEE address locations
+ *
+ * The address of the secondary location can be configured by the platform
+ * or example
+ *
+ * @{
+ */
+#define IEEE_ADDR_LOCATION_PRIMARY   0x500012F0 /**< Primary IEEE address location */
+
+#ifdef IEEE_ADDR_CONF_LOCATION_SECONDARY
+#define IEEE_ADDR_LOCATION_SECONDARY IEEE_ADDR_CONF_LOCATION_SECONDARY
+#else
+#define IEEE_ADDR_LOCATION_SECONDARY 0x0001FFC8 /**< Secondary IEEE address location */
+#endif
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Copy the node's IEEE address to a destination memory area
+ * \param dst A pointer to the destination area where the IEEE address is to be
+ *            written
+ * \param len The number of bytes to write to destination area
+ *
+ * This function will copy \e len LS bytes and it will invert byte order in
+ * the process. The factory address on devices is normally little-endian,
+ * therefore you should expect dst to store the address in a big-endian order.
+ */
+void ieee_addr_cpy_to(uint8_t *dst, uint8_t len);
+/*---------------------------------------------------------------------------*/
+#endif /* IEEE_ADDR_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/lpm.c

@@ -0,0 +1,408 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-lpm
+ * @{
+ *
+ * Implementation of CC26xx low-power operation functionality
+ *
+ * @{
+ *
+ * \file
+ * Driver for CC26xx's low-power operation
+ */
+/*---------------------------------------------------------------------------*/
+#include "prcm.h"
+#include "contiki-conf.h"
+#include "ti-lib.h"
+#include "lpm.h"
+#include "sys/energest.h"
+#include "lib/list.h"
+#include "dev/leds.h"
+#include "dev/watchdog.h"
+#include "dev/cc26xx-rtc.h"
+/*---------------------------------------------------------------------------*/
+#if ENERGEST_CONF_ON
+static unsigned long irq_energest = 0;
+
+#define ENERGEST_IRQ_SAVE(a) do { \
+    a = energest_type_time(ENERGEST_TYPE_IRQ); } while(0)
+#define ENERGEST_IRQ_RESTORE(a) do { \
+    energest_type_set(ENERGEST_TYPE_IRQ, a); } while(0)
+#else
+#define ENERGEST_IRQ_SAVE(a) do {} while(0)
+#define ENERGEST_IRQ_RESTORE(a) do {} while(0)
+#endif
+/*---------------------------------------------------------------------------*/
+LIST(modules_list);
+/*---------------------------------------------------------------------------*/
+/* Control what power domains we are allow to run under what mode */
+LIST(power_domain_locks_list);
+
+/* PDs that may stay on in deep sleep */
+#define LOCKABLE_DOMAINS ((uint32_t)(PRCM_DOMAIN_SERIAL | PRCM_DOMAIN_PERIPH))
+/*---------------------------------------------------------------------------*/
+/*
+ * Don't consider standby mode if the next AON RTC event is scheduled to fire
+ * in less than STANDBY_MIN_DURATION rtimer ticks
+ */
+#define STANDBY_MIN_DURATION (RTIMER_SECOND >> 8)
+/*---------------------------------------------------------------------------*/
+/* Variables used by the power on/off (Power mode: SHUTDOWN) functionality */
+static uint8_t shutdown_requested;
+static uint32_t pin;
+/*---------------------------------------------------------------------------*/
+void
+lpm_pd_lock_obtain(lpm_power_domain_lock_t *lock, uint32_t domains)
+{
+  /* We only accept locks for specific PDs */
+  domains &= LOCKABLE_DOMAINS;
+
+  if(domains == 0) {
+    return;
+  }
+
+  lock->domains = domains;
+
+  list_add(power_domain_locks_list, lock);
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_pd_lock_release(lpm_power_domain_lock_t *lock)
+{
+  lock->domains = 0;
+
+  list_remove(power_domain_locks_list, lock);
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_shutdown(uint32_t wakeup_pin)
+{
+  shutdown_requested = 1;
+  pin = wakeup_pin;
+}
+/*---------------------------------------------------------------------------*/
+static void
+shutdown_now(void)
+{
+  lpm_registered_module_t *module;
+  int i;
+  rtimer_clock_t t0;
+  uint32_t io_cfg = (IOC_STD_INPUT & ~IOC_IOPULL_M) | IOC_IOPULL_UP |
+                     IOC_WAKE_ON_LOW;
+
+  for(module = list_head(modules_list); module != NULL;
+      module = module->next) {
+    if(module->shutdown) {
+      module->shutdown(LPM_MODE_SHUTDOWN);
+    }
+  }
+
+  leds_off(LEDS_ALL);
+
+  for(i = 0; i < 5; i++) {
+    t0 = RTIMER_NOW();
+    leds_toggle(LEDS_ALL);
+    while(RTIMER_CLOCK_LT(RTIMER_NOW(), (t0 + (RTIMER_SECOND >> 3))));
+  }
+
+  leds_off(LEDS_ALL);
+
+  ti_lib_gpio_dir_mode_set((1 << pin), GPIO_DIR_MODE_IN);
+  ti_lib_ioc_port_configure_set(pin, IOC_PORT_GPIO, io_cfg);
+
+  ti_lib_pwr_ctrl_state_set(LPM_MODE_SHUTDOWN);
+}
+/*---------------------------------------------------------------------------*/
+/*
+ * We'll get called on three occasions:
+ * - While running
+ * - While sleeping
+ * - While deep sleeping
+ *
+ * For the former two, we don't need to do anything. For the latter, we
+ * notify all modules that we're back on and rely on them to restore clocks
+ * and power domains as required.
+ */
+void
+lpm_wake_up()
+{
+  lpm_registered_module_t *module;
+
+  /* Remember IRQ energest for next pass */
+  ENERGEST_IRQ_SAVE(irq_energest);
+  ENERGEST_ON(ENERGEST_TYPE_CPU);
+  ENERGEST_OFF(ENERGEST_TYPE_LPM);
+
+  /* Sync so that we get the latest values before adjusting recharge settings */
+  ti_lib_sys_ctrl_aon_sync();
+
+  /* Adjust recharge settings */
+  ti_lib_sys_ctrl_adjust_recharge_after_power_down();
+
+  /*
+   * Release the request to the uLDO
+   * This is likely not required, since the switch to GLDO/DCDC is automatic
+   * when coming back from deep sleep
+   */
+  ti_lib_prcm_mcu_uldo_configure(false);
+
+  /* Turn on cache again */
+  ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_ENABLED);
+  ti_lib_prcm_retention_enable(PRCM_DOMAIN_VIMS);
+
+  ti_lib_aon_ioc_freeze_disable();
+  ti_lib_sys_ctrl_aon_sync();
+
+  /* Power up AUX and allow it to go to sleep */
+  ti_lib_aon_wuc_aux_wakeup_event(AONWUC_AUX_ALLOW_SLEEP);
+
+  /* Notify all registered modules that we've just woken up */
+  for(module = list_head(modules_list); module != NULL;
+      module = module->next) {
+    if(module->wakeup) {
+      module->wakeup();
+    }
+  }
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_drop()
+{
+  lpm_registered_module_t *module;
+  lpm_power_domain_lock_t *lock;
+  uint8_t max_pm = LPM_MODE_MAX_SUPPORTED;
+  uint8_t module_pm;
+
+  uint32_t domains = LOCKABLE_DOMAINS;
+
+  if(shutdown_requested) {
+    shutdown_now();
+  }
+
+  if(RTIMER_CLOCK_LT(cc26xx_rtc_get_next_trigger(),
+                     RTIMER_NOW() + STANDBY_MIN_DURATION)) {
+    lpm_sleep();
+    return;
+  }
+
+  /* Collect max allowed PM permission from interested modules */
+  for(module = list_head(modules_list); module != NULL;
+      module = module->next) {
+    if(module->request_max_pm) {
+      module_pm = module->request_max_pm();
+      if(module_pm < max_pm) {
+        max_pm = module_pm;
+      }
+    }
+  }
+
+  /* Check if any events fired during this process. Last chance to abort */
+  if(process_nevents()) {
+    return;
+  }
+
+  /* Drop */
+  if(max_pm == LPM_MODE_SLEEP) {
+    lpm_sleep();
+  } else {
+    /* Critical. Don't get interrupted! */
+    ti_lib_int_master_disable();
+
+    /*
+     * Notify all registered modules that we are dropping to mode X. We do not
+     * need to do this for simple sleep.
+     *
+     * This is a chance for modules to delay us a little bit until an ongoing
+     * operation has finished (e.g. uart TX) or to configure themselves for
+     * deep sleep.
+     */
+    for(module = list_head(modules_list); module != NULL;
+        module = module->next) {
+      if(module->shutdown) {
+        module->shutdown(max_pm);
+      }
+    }
+
+    /*
+     * Iterate PD locks to see what we can and cannot turn off.
+     *
+     * The argument to PRCMPowerDomainOff() is a bitwise OR, so every time
+     * we encounter a lock we just clear the respective bits  in the 'domains'
+     * variable as required by the lock. In the end the domains variable will
+     * just hold whatever has not been cleared
+     */
+    for(lock = list_head(power_domain_locks_list); lock != NULL;
+        lock = lock->next) {
+      /* Clear the bits specified in the lock */
+      domains &= ~lock->domains;
+    }
+
+    /* Pat the dog: We don't want it to shout right after we wake up */
+    watchdog_periodic();
+
+    /* Clear unacceptable bits, just in case a lock provided a bad value */
+    domains &= LOCKABLE_DOMAINS;
+
+    /*
+     * Freeze the IOs on the boundary between MCU and AON. We only do this if
+     * PERIPH is not needed
+     */
+    if(domains & PRCM_DOMAIN_PERIPH) {
+      ti_lib_aon_ioc_freeze_enable();
+    }
+
+    /*
+     * Among LOCKABLE_DOMAINS, turn off those that are not locked
+     *
+     * If domains is != 0, pass it as-is
+     */
+    if(domains) {
+      ti_lib_prcm_power_domain_off(domains);
+    }
+
+    /* Configure clock sources for MCU and AUX: No clock */
+    ti_lib_aon_wuc_mcu_power_down_config(AONWUC_NO_CLOCK);
+    ti_lib_aon_wuc_aux_power_down_config(AONWUC_NO_CLOCK);
+
+    /* Full RAM retention. */
+    ti_lib_aon_wuc_mcu_sram_config(MCU_RAM0_RETENTION | MCU_RAM1_RETENTION |
+                                   MCU_RAM2_RETENTION | MCU_RAM3_RETENTION);
+
+    /* Enable retention on the CPU domain */
+    ti_lib_prcm_retention_enable(PRCM_DOMAIN_CPU);
+
+    /* Disable retention of AUX RAM */
+    ti_lib_aon_wuc_aux_sram_config(false);
+
+    /* Disable retention in the RFCORE RAM */
+    HWREG(PRCM_BASE + PRCM_O_RAMRETEN) &= ~PRCM_RAMRETEN_RFC;
+
+    /* Disable retention of VIMS RAM (TRAM and CRAM) */
+    //TODO: This can probably be removed, we are calling ti_lib_prcm_retention_disable(PRCM_DOMAIN_VIMS); further down
+    HWREG(PRCM_BASE + PRCM_O_RAMRETEN) &= ~PRCM_RAMRETEN_VIMS_M;
+
+    /*
+     * Always turn off RFCORE, CPU, SYSBUS and VIMS. RFCORE should be off
+     * already
+     */
+    ti_lib_prcm_power_domain_off(PRCM_DOMAIN_RFCORE | PRCM_DOMAIN_CPU |
+                                 PRCM_DOMAIN_VIMS | PRCM_DOMAIN_SYSBUS);
+
+    /* Request JTAG domain power off */
+    ti_lib_aon_wuc_jtag_power_off();
+
+    /* Turn off AUX */
+    ti_lib_aux_wuc_power_ctrl(AUX_WUC_POWER_OFF);
+    ti_lib_aon_wuc_domain_power_down_enable();
+    while(ti_lib_aon_wuc_power_status() & AONWUC_AUX_POWER_ON);
+
+    /* Configure the recharge controller */
+    ti_lib_sys_ctrl_set_recharge_before_power_down(false);
+
+    /*
+     * If both PERIPH and SERIAL PDs are off, request the uLDO for as the power
+     * source while in deep sleep.
+     */
+    if(domains == LOCKABLE_DOMAINS) {
+      ti_lib_pwr_ctrl_source_set(PWRCTRL_PWRSRC_ULDO);
+    }
+
+    /* We are only interested in IRQ energest while idle or in LPM */
+    ENERGEST_IRQ_RESTORE(irq_energest);
+    ENERGEST_OFF(ENERGEST_TYPE_CPU);
+    ENERGEST_ON(ENERGEST_TYPE_LPM);
+
+    /* Sync the AON interface to ensure all writes have gone through. */
+    ti_lib_sys_ctrl_aon_sync();
+
+    /*
+     * Explicitly turn off VIMS cache, CRAM and TRAM. Needed because of
+     * retention mismatch between VIMS logic and cache. We wait to do this
+     * until right before deep sleep to be able to use the cache for as long
+     * as possible.
+     */
+    ti_lib_prcm_retention_disable(PRCM_DOMAIN_VIMS);
+    ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_OFF);
+
+    /* Deep Sleep */
+    ti_lib_prcm_deep_sleep();
+
+    /*
+     * When we reach here, some interrupt woke us up. The global interrupt
+     * flag is off, hence we have a chance to run things here. We will wake up
+     * the chip properly, and then we will enable the global interrupt without
+     * unpending events so the handlers can fire
+     */
+    lpm_wake_up();
+
+    ti_lib_int_master_enable();
+  }
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_sleep(void)
+{
+  ENERGEST_OFF(ENERGEST_TYPE_CPU);
+  ENERGEST_ON(ENERGEST_TYPE_LPM);
+
+  /* We are only interested in IRQ energest while idle or in LPM */
+  ENERGEST_IRQ_RESTORE(irq_energest);
+
+  /* Just to be on the safe side, explicitly disable Deep Sleep */
+  HWREG(NVIC_SYS_CTRL) &= ~(NVIC_SYS_CTRL_SLEEPDEEP);
+
+  ti_lib_prcm_sleep();
+
+  /* Remember IRQ energest for next pass */
+  ENERGEST_IRQ_SAVE(irq_energest);
+
+  ENERGEST_ON(ENERGEST_TYPE_CPU);
+  ENERGEST_OFF(ENERGEST_TYPE_LPM);
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_register_module(lpm_registered_module_t *module)
+{
+  list_add(modules_list, module);
+}
+/*---------------------------------------------------------------------------*/
+void
+lpm_init()
+{
+  list_init(modules_list);
+  list_init(power_domain_locks_list);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/lpm.h

@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-lpm CC26xx Low-Power management
+ *
+ * CC26xx low-power operation
+ *
+ * @{
+ *
+ * \file
+ * Header file for the management of CC26xx low-power operation
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef LPM_H_
+#define LPM_H_
+/*---------------------------------------------------------------------------*/
+#include "pwr_ctrl.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#define LPM_MODE_SLEEP         PWRCTRL_ACTIVE
+#define LPM_MODE_DEEP_SLEEP    PWRCTRL_POWER_DOWN
+#define LPM_MODE_SHUTDOWN      PWRCTRL_SHUTDOWN
+
+#define LPM_MODE_MAX_SUPPORTED LPM_MODE_DEEP_SLEEP
+/*---------------------------------------------------------------------------*/
+typedef struct lpm_registered_module {
+  struct lpm_registered_module *next;
+  uint8_t (*request_max_pm)(void);
+  void (*shutdown)(uint8_t mode);
+  void (*wakeup)(void);
+} lpm_registered_module_t;
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Declare a variable to be used in order to get notifications from LPM
+ * \param n the variable name to be declared
+ * \param m A pointer to a function which will tell the LPM module the max
+ *          PM this module is willing to handle. This function will return
+ *          LPM_MODE_SLEEP, LPM_MODE_DEEP_SLEEP etc. The LPM module will ask all
+ *          registered modules and will trigger the highest LPM permitted
+ * \param s A pointer to a function which will receive a notification just
+ *          before entering the low power mode. The callee can prepare for the
+ *          imminent LPM state. The argument to this function will be the
+ *          upcoming low power mode. This function can e.g. turn off a
+ *          peripheral before the LPM module shuts down the power domain.
+ * \param w A pointer to a function which will be called just after we have
+ *          woken up. This can be used to e.g. turn a peripheral back on. This
+ *          function is in charge of turning power domains back on. This
+ *          function will normally be called within an interrupt context.
+ */
+#define LPM_MODULE(n, m, s, w) static lpm_registered_module_t n = \
+  { NULL, m, s, w }
+/*---------------------------------------------------------------------------*/
+/**
+ *
+ * \brief Data type used to control whether a PD will get shut down when the
+ * CM3 drops to deep sleep
+ *
+ * Modules using these facilities must allocate a variable of this type, but
+ * they must not try to manipulate it directly. Instead, the respective
+ * functions must be used
+ *
+ * \sa lpm_pd_lock_obtain(), lpm_pd_lock_release()
+ */
+typedef struct lpm_power_domain_lock {
+  struct lpm_power_domain_lock *next;
+  uint32_t domains;
+} lpm_power_domain_lock_t;
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Prohibit a PD from turning off in standby mode
+ * \param lock A pointer to a lpm_power_domain_lock_t
+ * \param domains Bitwise OR from PRCM_DOMAIN_PERIPH, PRCM_DOMAIN_SERIAL
+ *
+ * The caller is responsible for allocating lpm_power_domain_lock_t
+ *
+ * Only the domains listed above can be locked / released, but a single lock
+ * can be used for multiple domains
+ */
+void lpm_pd_lock_obtain(lpm_power_domain_lock_t *lock, uint32_t domains);
+
+/**
+ * \brief Permit a PD to turn off in standby mode
+ * \param pd A pointer to a previously used lock
+ *
+ * \sa lpm_pd_lock_obtain()
+ */
+void lpm_pd_lock_release(lpm_power_domain_lock_t *pd);
+
+/**
+ * \brief Drop the cortex to sleep / deep sleep and shut down peripherals
+ *
+ * Whether the cortex will drop to sleep or deep sleep is configurable. The
+ * exact peripherals which will be shut down is also configurable
+ */
+void lpm_drop(void);
+
+/**
+ * \brief Enter sleep mode
+ */
+void lpm_sleep(void);
+
+/**
+ * \brief Put the chip in shutdown power mode
+ * \param wakeup_pin The GPIO pin which will wake us up. Must be IOID_0 etc...
+ */
+void lpm_shutdown(uint32_t wakeup_pin);
+
+/**
+ * \brief Wake up from sleep mode
+ *
+ * This function must be called at the start of any interrupt context which
+ * may bring us out of sleep. Current interrupts do this already, but make sure
+ * to do the same when adding new ISRs
+ */
+void lpm_wake_up(void);
+
+/**
+ * \brief Register a module for LPM notifications.
+ * \param module A pointer to the data structure with the module definition
+ *
+ * When the LPM module is about to drop to some low power mode, it will first
+ * notify all modules about this.
+ *
+ * This function must not be called before the module has been initialised
+ * with lpm_init(). The code does not perform checks: This is the caller's
+ * responsibility.
+ */
+void lpm_register_module(lpm_registered_module_t *module);
+
+/**
+ * \brief Initialise the low-power mode management module
+ */
+void lpm_init(void);
+/*---------------------------------------------------------------------------*/
+#endif /* LPM_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/mtarch.h

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2010, Loughborough University - Computer Science
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials provided
+ *    with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/*
+ * \file
+ * Stub header file for multi-threading. It doesn't do anything, it
+ * just exists so that mt.c can compile cleanly.
+ *
+ * This is based on the original mtarch.h for z80 by Takahide Matsutsuka
+ *
+ * \author
+ * George Oikonomou - <oikonomou@users.sourceforge.net>
+ */
+#ifndef __MTARCH_H__
+#define __MTARCH_H__
+
+struct mtarch_thread {
+  unsigned char *sp;
+};
+
+#endif /* __MTARCH_H__ */

cpu/cc26xx/putchar.c

@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#include "cc26xx-uart.h"
+
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+int
+putchar(int c)
+{
+  cc26xx_uart_write_byte(c);
+  return c;
+}
+/*---------------------------------------------------------------------------*/
+int
+puts(const char *str)
+{
+  int i;
+  if(str == NULL) {
+    return 0;
+  }
+  for(i = 0; i < strlen(str); i++) {
+    putchar(str[i]);
+  }
+  putchar('\n');
+  return i;
+}
+/*---------------------------------------------------------------------------*/
+unsigned int
+dbg_send_bytes(const unsigned char *s, unsigned int len)
+{
+  unsigned int i = 0;
+
+  while(s && *s != 0) {
+    if(i >= len) {
+      break;
+    }
+    putchar(*s++);
+    i++;
+  }
+  return i;
+}
+/*---------------------------------------------------------------------------*/

cpu/cc26xx/rtimer-arch.c

@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-rtimer
+ * @{
+ *
+ * \file
+ * Implementation of the arch-specific rtimer functions for the cc26xx
+ *
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "sys/energest.h"
+#include "sys/rtimer.h"
+#include "cpu.h"
+#include "dev/cc26xx-rtc.h"
+
+#include "ti-lib.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief We don't need to do anything special here. The RTC is initialised
+ * elsewhere
+ */
+void
+rtimer_arch_init(void)
+{
+  return;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Schedules an rtimer task to be triggered at time t
+ * \param t The time when the task will need executed.
+ *
+ * \e t is an absolute time, in other words the task will be executed AT
+ * time \e t, not IN \e t rtimer ticks.
+ *
+ * This function schedules a one-shot event with the AON RTC.
+ *
+ * This functions converts \e to a value suitable for the AON RTC.
+ */
+void
+rtimer_arch_schedule(rtimer_clock_t t)
+{
+  /* Convert the rtimer tick value to a value suitable for the AON RTC */
+  cc26xx_rtc_schedule_one_shot(t);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Returns the current real-time clock time
+ * \return The current rtimer time in ticks
+ *
+ * The value is read from the AON RTC counter and converted to a number of
+ * rtimer ticks
+ *
+ */
+rtimer_clock_t
+rtimer_arch_now()
+{
+  return ti_lib_aon_rtc_current_compare_value_get();
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

cpu/cc26xx/rtimer-arch.h

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-clocks
+ * @{
+ *
+ * \defgroup cc26xx-rtimer CC26xx rtimer
+ *
+ * Implementation of the rtimer module for the CC26xx
+ *
+ * The rtimer runs on the AON RTC. We set the RTC's channel 2 to continuous
+ * compare mode, instead of scheduling the next tick interrupt by software.
+ * This gives us completely equidistant events.
+ *
+ * The RTC runs in all power modes (except shutdown)
+ * @{
+ */
+/**
+ * \file
+ * Header file for the CC26xx rtimer driver
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef RTIMER_ARCH_H_
+#define RTIMER_ARCH_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+/*---------------------------------------------------------------------------*/
+#define RTIMER_ARCH_SECOND 65536
+/*---------------------------------------------------------------------------*/
+rtimer_clock_t rtimer_arch_now(void);
+/*---------------------------------------------------------------------------*/
+#endif /* RTIMER_ARCH_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/cc26xx/slip-arch.c

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-char-io
+ * @{
+ *
+ * \file
+ * Arch-specific SLIP functions for the cc26xx
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "dev/cc26xx-uart.h"
+#include "dev/slip.h"
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Write a byte over SLIP
+ * \param c the byte
+ */
+void
+slip_arch_writeb(unsigned char c)
+{
+  cc26xx_uart_write_byte(c);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initialise the arch-specific SLIP driver
+ * \param ubr Ignored for the cc26xx
+ */
+void
+slip_arch_init(unsigned long ubr)
+{
+  cc26xx_uart_set_input(slip_input_byte);
+}
+/*---------------------------------------------------------------------------*/
+
+/** @} */

cpu/cc26xx/ti-lib.h

@@ -0,0 +1,667 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx
+ * @{
+ *
+ * \defgroup cc26xx-ti-lib TI CC26xxware Glue
+ *
+ * Glue file which renames TI CC26xxware functions. Thus, for example,
+ * PowerCtrlIOFreezeDisable() becomes power_ctrl_io_freeze_disable()
+ *
+ * This is not strictly required and a call to the former will work perfectly
+ * correctly. However, in using those macros, we make the core of the Contiki
+ * port match the naming convention.
+ *
+ * Since all functions are prefixed with ti_lib, it also becomes clear to the
+ * reader that this is a call to TI driverlib's sources and not a call to a
+ * function inside Contiki
+ *
+ * @{
+ *
+ * \file
+ * Header file with macros which rename TI CC26xxware functions.
+ */
+#ifndef TI_LIB_H_
+#define TI_LIB_H_
+/*---------------------------------------------------------------------------*/
+/* aon_batmon.h */
+#include "driverlib/aon_batmon.h"
+
+#define ti_lib_aon_batmon_enable(...)                    AONBatMonEnable(__VA_ARGS__)
+#define ti_lib_aon_batmon_disable(...)                   AONBatMonDisable(__VA_ARGS__)
+#define ti_lib_aon_batmon_measurement_cycle_set(...)     AONBatMonMeasurementCycleSet(__VA_ARGS__)
+#define ti_lib_aon_batmon_measurement_cycle_get(...)     AONBatMonMeasurementCycleGet(__VA_ARGS__)
+#define ti_lib_aon_batmon_battery_trim_set(...)          AONBatMonBatteryTrimSet(__VA_ARGS__)
+#define ti_lib_aon_batmon_temperature_trim_set(...)      AONBatMonTemperatureTrimSet(__VA_ARGS__)
+#define ti_lib_aon_batmon_temperature_get(...)           AONBatMonTemperatureGet(__VA_ARGS__)
+#define ti_lib_aon_batmon_temp_get_deg(...)              AON_BatmonTempGetDegC(__VA_ARGS__)
+#define ti_lib_aon_batmon_battery_voltage_get(...)       AONBatMonBatteryVoltageGet(__VA_ARGS__)
+#define ti_lib_aon_batmon_new_battery_measure_ready(...) AONBatMonNewBatteryMeasureReady(__VA_ARGS__)
+#define ti_lib_aon_batmon_new_temp_measure_ready(...)    AONBatMonNewTempMeasureReady(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* aon_event.h */
+#include "driverlib/aon_event.h"
+
+#define ti_lib_aon_event_mcu_wake_up_set(...) AONEventMcuWakeUpSet(__VA_ARGS__)
+#define ti_lib_aon_event_mcu_wake_up_get(...) AONEventMcuWakeUpGet(__VA_ARGS__)
+#define ti_lib_aon_event_aux_wake_up_set(...) AONEventAuxWakeUpSet(__VA_ARGS__)
+#define ti_lib_aon_event_aux_wake_up_get(...) AONEventAuxWakeUpGet(__VA_ARGS__)
+#define ti_lib_aon_event_mcu_set(...)         AONEventMcuSet(__VA_ARGS__)
+#define ti_lib_aon_event_mcu_get(...)         AONEventMcuGet(__VA_ARGS__)
+#define ti_lib_aon_event_rtc_set(...)         AONEventRtcSet(__VA_ARGS__)
+#define ti_lib_aon_event_rtc_get(...)         AONEventRtcGet(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* aon_ioc.h */
+#include "driverlib/aon_ioc.h"
+
+#define ti_lib_aon_ioc_drive_strength_set(...)    AONIOCDriveStrengthSet(__VA_ARGS__)
+#define ti_lib_aon_ioc_drive_strength_get(...)    AONIOCDriveStrengthGet(__VA_ARGS__)
+#define ti_lib_aon_ioc_freeze_enable(...)         AONIOCFreezeEnable(__VA_ARGS__)
+#define ti_lib_aon_ioc_freeze_disable(...)        AONIOCFreezeDisable(__VA_ARGS__)
+#define ti_lib_aon_ioc_32_khz_output_disable(...) AONIOC32kHzOutputDisable(__VA_ARGS__)
+#define ti_lib_aon_ioc_32_khz_output_enable(...)  AONIOC32kHzOutputEnable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* aon_rtc.h */
+#include "driverlib/aon_rtc.h"
+
+#define ti_lib_aon_rtc_enable(...)                    AONRTCEnable(__VA_ARGS__)
+#define ti_lib_aon_rtc_disable(...)                   AONRTCDisable(__VA_ARGS__)
+#define ti_lib_aon_rtc_status(...)                    AONRTCStatus(__VA_ARGS__)
+#define ti_lib_aon_rtc_reset(...)                     AONRTCReset(__VA_ARGS__)
+#define ti_lib_aon_rtc_delay_config(...)              AONRTCDelayConfig(__VA_ARGS__)
+#define ti_lib_aon_rtc_combined_event_config(...)     AONRTCCombinedEventConfig(__VA_ARGS__)
+#define ti_lib_aon_rtc_event_clear(...)               AONRTCEventClear(__VA_ARGS__)
+#define ti_lib_aon_rtc_event_get(...)                 AONRTCEventGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_sec_get(...)                   AONRTCSecGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_fraction_get(...)              AONRTCFractionGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_sub_sec_incr_get(...)          AONRTCSubSecIncrGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_mode_ch1_set(...)              AONRTCModeCh1Set(__VA_ARGS__)
+#define ti_lib_aon_rtc_mode_ch1_get(...)              AONRTCModeCh1Get(__VA_ARGS__)
+#define ti_lib_aon_rtc_mode_ch2_set(...)              AONRTCModeCh2Set(__VA_ARGS__)
+#define ti_lib_aon_rtc_mode_ch2_get(...)              AONRTCModeCh2Get(__VA_ARGS__)
+#define ti_lib_aon_rtc_channel_enable(...)            AONRTCChannelEnable(__VA_ARGS__)
+#define ti_lib_aon_rtc_channel_disable(...)           AONRTCChannelDisable(__VA_ARGS__)
+#define ti_lib_aon_rtc_compare_value_set(...)         AONRTCCompareValueSet(__VA_ARGS__)
+#define ti_lib_aon_rtc_compare_value_get(...)         AONRTCCompareValueGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_current_compare_value_get(...) AONRTCCurrentCompareValueGet(__VA_ARGS__)
+#define ti_lib_aon_rtc_inc_value_ch2_set(...)         AONRTCIncValueCh2Set(__VA_ARGS__)
+#define ti_lib_aon_rtc_inc_value_ch2_get(...)         AONRTCIncValueCh2Get(__VA_ARGS__)
+#define ti_lib_aon_rtc_capture_value_ch1_get(...)     AONRTCCaptureValueCh1Get(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* aon_wuc.h */
+#include "driverlib/aon_wuc.h"
+
+#define ti_lib_aon_wuc_mcu_wake_up_config(...)        AONWUCMcuWakeUpConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_mcu_power_down_config(...)     AONWUCMcuPowerDownConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_mcu_power_off_config(...)      AONWUCMcuPowerOffConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_mcu_sram_config(...)           AONWUCMcuSRamConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_clock_config_set(...)      AONWUCAuxClockConfigSet(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_clock_config_get(...)      AONWUCAuxClockConfigGet(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_power_down_config(...)     AONWUCAuxPowerDownConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_power_off_config(...)      AONWUCAuxPowerOffConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_wake_up_config(...)        AONWUCAuxWakeUpConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_sram_config(...)           AONWUCAuxSRamConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_wakeup_event(...)          AONWUCAuxWakeupEvent(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_image_valid(...)           AONWUCAuxImageValid(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_image_invalid(...)         AONWUCAuxImageInvalid(__VA_ARGS__)
+#define ti_lib_aon_wuc_aux_reset(...)                 AONWUCAuxReset(__VA_ARGS__)
+#define ti_lib_aon_wuc_power_status(...)              AONWUCPowerStatus(__VA_ARGS__)
+#define ti_lib_aon_wuc_shut_down_enable(...)          AONWUCShutDownEnable(__VA_ARGS__)
+#define ti_lib_aon_wuc_domain_power_down_enable(...)  AONWUCDomainPowerDownEnable(__VA_ARGS__)
+#define ti_lib_aon_wuc_domain_power_down_disable(...) AONWUCDomainPowerDownDisable(__VA_ARGS__)
+#define ti_lib_aon_wuc_mcu_reset_status(...)          AONWUCMcuResetStatus(__VA_ARGS__)
+#define ti_lib_aon_wuc_mcu_reset_clear(...)           AONWUCMcuResetClear(__VA_ARGS__)
+#define ti_lib_aon_wuc_recharge_ctrl_config_set(...)  AONWUCRechargeCtrlConfigSet(__VA_ARGS__)
+#define ti_lib_aon_wuc_recharge_ctrl_config_get(...)  AONWUCRechargeCtrlConfigGet(__VA_ARGS__)
+#define ti_lib_aon_wuc_osc_config(...)                AONWUCOscConfig(__VA_ARGS__)
+#define ti_lib_aon_wuc_jtag_power_off(...)            AONWUCJtagPowerOff(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* aux_wuc.h */
+#include "driverlib/aux_wuc.h"
+
+#define ti_lib_aux_wuc_clock_enable(...)   AUXWUCClockEnable(__VA_ARGS__)
+#define ti_lib_aux_wuc_clock_disble(...)   AUXWUCClockDisable(__VA_ARGS__)
+#define ti_lib_aux_wuc_clock_status(...)   AUXWUCClockStatus(__VA_ARGS__)
+#define ti_lib_aux_wuc_clock_freq_req(...) AUXWUCClockFreqReq(__VA_ARGS__)
+#define ti_lib_aux_wuc_power_ctrl(...)     AUXWUCPowerCtrl(__VA_ARGS__)
+#define ti_lib_aux_wuc_freeze_enable(...)  AUXWUCFreezeEnable(__VA_ARGS__)
+#define ti_lib_aux_wuc_freeze_disable(...) AUXWUCFreezeDisable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* cpu.h */
+#include "driverlib/cpu.h"
+
+#define ti_lib_cpu_cpsid(...)        CPUcpsid(__VA_ARGS__)
+#define ti_lib_cpu_cpsie(...)        CPUcpsie(__VA_ARGS__)
+#define ti_lib_cpu_primask(...)      CPUprimask(__VA_ARGS__)
+#define ti_lib_cpu_wfi(...)          CPUwfi(__VA_ARGS__)
+#define ti_lib_cpu_wfe(...)          CPUwfe(__VA_ARGS__)
+#define ti_lib_cpu_sev(...)          CPUsev(__VA_ARGS__)
+#define ti_lib_cpu_base_pri_get(...) CPUbasepriGet(__VA_ARGS__)
+#define ti_lib_cpu_base_pri_set(...) CPUbasepriSet(__VA_ARGS__)
+#define ti_lib_cpu_delay(...)        CPUdelay(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* ddi.h */
+#include "driverlib/ddi.h"
+
+#define ti_lib_aux_adi_ddi_safe_write(...) AuxAdiDdiSafeWrite(__VA_ARGS__)
+#define ti_lib_aux_adi_ddi_safe_read(...)  AuxAdiDdiSafeRead(__VA_ARGS__)
+#define ti_lib_ddi_status_get(...)         DDIStatusGet(__VA_ARGS__)
+#define ti_lib_ddi_config_set(...)         DDIConfigSet(__VA_ARGS__)
+#define ti_lib_ddi_sync(...)               DDISync(__VA_ARGS__)
+#define ti_lib_ddi_protect(...)            DDIProtect(__VA_ARGS__)
+#define ti_lib_ddi_32_reg_write(...)       DDI32RegWrite(__VA_ARGS__)
+#define ti_lib_ddi_32_reg_read(...)        DDI32RegRead(__VA_ARGS__)
+#define ti_lib_ddi_32_bits_set(...)        DDI32BitsSet(__VA_ARGS__)
+#define ti_lib_ddi_32_bits_clear(...)      DDI32BitsClear(__VA_ARGS__)
+#define ti_lib_ddi_8_set_val_bit(...)      DDI8SetValBit(__VA_ARGS__)
+#define ti_lib_ddi_16_set_val_bit(...)     DDI16SetValBit(__VA_ARGS__)
+#define ti_lib_ddi_16_bit_write(...)       DDI16BitWrite(__VA_ARGS__)
+#define ti_lib_ddi_16_bit_field_write(...) DDI16BitfieldWrite(__VA_ARGS__)
+#define ti_lib_ddi_16_bit_read(...)        DDI16BitRead(__VA_ARGS__)
+#define ti_lib_ddi_16_bitfield_read(...)   DDI16BitfieldRead(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* gpio.h */
+#include "driverlib/gpio.h"
+
+#define ti_lib_gpio_dir_mode_set(...) GPIODirModeSet(__VA_ARGS__)
+#define ti_lib_gpio_dir_mode_get(...) GPIODirModeGet(__VA_ARGS__)
+#define ti_lib_gpio_pin_write(...)    GPIOPinWrite(__VA_ARGS__)
+#define ti_lib_gpio_pin_read(...)     GPIOPinRead(__VA_ARGS__)
+#define ti_lib_gpio_pin_clear(...)    GPIOPinClear(__VA_ARGS__)
+#define ti_lib_gpio_pin_toggle(...)   GPIOPinToggle(__VA_ARGS__)
+#define ti_lib_gpio_event_get(...)    GPIOEventGet(__VA_ARGS__)
+#define ti_lib_gpio_event_clear(...)  GPIOEventClear(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* i2c.h */
+#include "driverlib/i2c.h"
+
+#define ti_lib_i2c_int_register(...)          I2CIntRegister(__VA_ARGS__)
+#define ti_lib_i2c_int_unregister(...)        I2CIntUnregister(__VA_ARGS__)
+#define ti_lib_i2c_master_bus_busy(...)       I2CMasterBusBusy(__VA_ARGS__)
+#define ti_lib_i2c_master_busy(...)           I2CMasterBusy(__VA_ARGS__)
+#define ti_lib_i2c_master_control(...)        I2CMasterControl(__VA_ARGS__)
+#define ti_lib_i2c_master_data_get(...)       I2CMasterDataGet(__VA_ARGS__)
+#define ti_lib_i2c_master_data_put(...)       I2CMasterDataPut(__VA_ARGS__)
+#define ti_lib_i2c_master_disable(...)        I2CMasterDisable(__VA_ARGS__)
+#define ti_lib_i2c_master_enable(...)         I2CMasterEnable(__VA_ARGS__)
+#define ti_lib_i2c_master_err(...)            I2CMasterErr(__VA_ARGS__)
+#define ti_lib_i2c_master_init_exp_clk(...)   I2CMasterInitExpClk(__VA_ARGS__)
+#define ti_lib_i2c_master_int_clear(...)      I2CMasterIntClear(__VA_ARGS__)
+#define ti_lib_i2c_master_int_disable(...)    I2CMasterIntDisable(__VA_ARGS__)
+#define ti_lib_i2c_master_int_enable(...)     I2CMasterIntEnable(__VA_ARGS__)
+#define ti_lib_i2c_master_int_status(...)     I2CMasterIntStatus(__VA_ARGS__)
+#define ti_lib_i2c_master_slave_addr_set(...) I2CMasterSlaveAddrSet(__VA_ARGS__)
+#define ti_lib_i2c_slave_data_get(...)        I2CSlaveDataGet(__VA_ARGS__)
+#define ti_lib_i2c_slave_data_put(...)        I2CSlaveDataPut(__VA_ARGS__)
+#define ti_lib_i2c_slave_disable(...)         I2CSlaveDisable(__VA_ARGS__)
+#define ti_lib_i2c_slave_enable(...)          I2CSlaveEnable(__VA_ARGS__)
+#define ti_lib_i2c_slave_init(...)            I2CSlaveInit(__VA_ARGS__)
+#define ti_lib_i2c_slave_address_set(...)     I2CSlaveAddressSet(__VA_ARGS__)
+#define ti_lib_i2c_slave_int_clear(...)       I2CSlaveIntClear(__VA_ARGS__)
+#define ti_lib_i2c_slave_int_disable(...)     I2CSlaveIntDisable(__VA_ARGS__)
+#define ti_lib_i2c_slave_int_enable(...)      I2CSlaveIntEnable(__VA_ARGS__)
+#define ti_lib_i2c_slave_int_status(...)      I2CSlaveIntStatus(__VA_ARGS__)
+#define ti_lib_i2c_slave_status(...)          I2CSlaveStatus(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* interrupt.h */
+#include "driverlib/interrupt.h"
+
+#define ti_lib_int_master_enable(...)         IntMasterEnable(__VA_ARGS__)
+#define ti_lib_int_master_disable(...)        IntMasterDisable(__VA_ARGS__)
+#define ti_lib_int_register(...)              IntRegister(__VA_ARGS__);
+#define ti_lib_int_unregsiter(...)            IntUnregister(__VA_ARGS__)
+#define ti_lib_int_priority_grouping_set(...) IntPriorityGroupingSet(__VA_ARGS__)
+#define ti_lib_int_priority_grouping_get(...) IntPriorityGroupingGet(__VA_ARGS__)
+#define ti_lib_int_priority_set(...)          IntPrioritySet(__VA_ARGS__)
+#define ti_lib_int_priority_get(...)          IntPriorityGet(__VA_ARGS__)
+#define ti_lib_int_enable(...)                IntEnable(__VA_ARGS__)
+#define ti_lib_int_disable(...)               IntDisable(__VA_ARGS__)
+#define ti_lib_int_pend_set(...)              IntPendSet(__VA_ARGS__)
+#define ti_lib_int_pend_get(...)              IntPendGet(__VA_ARGS__)
+#define ti_lib_int_pend_clear(...)            IntPendClear(__VA_ARGS__)
+#define ti_lib_int_mask_set(...)              IntPriorityMaskSet(__VA_ARGS__)
+#define ti_lib_int_mask_get(...)              IntPriorityMaskGet(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* ioc.h */
+#include "driverlib/ioc.h"
+
+#define ti_lib_ioc_port_configure_set(...)   IOCPortConfigureSet(__VA_ARGS__)
+#define ti_lib_ioc_port_configure_get(...)   IOCPortConfigureGet(__VA_ARGS__)
+#define ti_lib_ioc_io_shutdown_set(...)      IOCIOShutdownSet(__VA_ARGS__)
+#define ti_lib_ioc_io_jtag_set(...)          IOCIOJTagSet(__VA_ARGS__)
+#define ti_lib_ioc_io_mode_set(...)          IOCIOModeSet(__VA_ARGS__)
+#define ti_lib_ioc_io_port_pull_set(...)     IOCIOPortPullSet(__VA_ARGS__)
+#define ti_lib_ioc_io_hyst_set(...)          IOCIOHystSet(__VA_ARGS__)
+#define ti_lib_ioc_io_input_set(...)         IOCIOInputSet(__VA_ARGS__)
+#define ti_lib_ioc_io_slew_ctrl_set(...)     IOCIOSlewCtrlSet(__VA_ARGS__)
+#define ti_lib_ioc_io_drv_strength_set(...)  IOCIODrvStrengthSet(__VA_ARGS__)
+#define ti_lib_ioc_io_port_id_set(...)       IOCIOPortIdSet(__VA_ARGS__)
+#define ti_lib_ioc_io_int_set(...)           IOCIOIntSet(__VA_ARGS__)
+#define ti_lib_ioc_int_register(...)         IOCIntRegister(__VA_ARGS__);
+#define ti_lib_ioc_int_unregister(...)       IOCIntUnregister(__VA_ARGS__)
+#define ti_lib_ioc_int_enable(...)           IOCIntEnable(__VA_ARGS__)
+#define ti_lib_ioc_int_disable(...)          IOCIntDisable(__VA_ARGS__)
+#define ti_lib_ioc_int_clear(...)            IOCIntClear(__VA_ARGS__)
+#define ti_lib_ioc_int_status(...)           IOCIntStatus(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_gpio_input(...)  IOCPinTypeGpioInput(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_gpio_output(...) IOCPinTypeGpioOutput(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_uart(...)        IOCPinTypeUart(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_ssi_master(...)  IOCPinTypeSsiMaster(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_ssi_slave(...)   IOCPinTypeSsiSlave(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_i2c(...)         IOCPinTypeI2c(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_aux(...)         IOCPinTypeAux(__VA_ARGS__)
+#define ti_lib_ioc_pin_type_spis(...)        IOCPinTypeSpis(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* osc.h */
+#include "driverlib/osc.h"
+
+#define ti_lib_osc_xhf_power_mode_set(...)                OSCXHfPowerModeSet(__VA_ARGS__)
+#define ti_lib_osc_clock_source_set(...)                  OSCClockSourceSet(__VA_ARGS__)
+#define ti_lib_osc_clock_source_get(...)                  OSCClockSourceGet(__VA_ARGS__)
+#define ti_lib_osc_hf_source_ready(...)                   OSCHfSourceReady(__VA_ARGS__)
+#define ti_lib_osc_hf_source_switch(...)                  OSCHfSourceSwitch(__VA_ARGS__)
+#define ti_lib_osc_interface_enable(...)                  OSCInterfaceEnable(__VA_ARGS__)
+#define ti_lib_osc_interface_disable(...)                 OSCInterfaceDisable(__VA_ARGS__)
+#define ti_lib_osc_hf_get_startup_time(...)               OSCHF_GetStartupTime(__VA_ARGS__)
+#define ti_lib_osc_hf_turn_on_xosc(...)                   OSCHF_TurnOnXosc(__VA_ARGS__)
+#define ti_lib_osc_hf_attempt_to_switch_to_xosc(...)      OSCHF_AttemptToSwitchToXosc(__VA_ARGS__)
+#define ti_lib_osc_hf_switch_to_rc_osc_turn_off_xosc(...) OSCHF_SwitchToRcOscTurnOffXosc(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* prcm.h */
+#include "driverlib/prcm.h"
+
+#define ti_lib_prcm_inf_clock_configure_set(...)       PRCMInfClockConfigureSet(__VA_ARGS__)
+#define ti_lib_prcm_inf_clock_configure_get(...)       PRCMInfClockConfigureGet(__VA_ARGS__)
+#define ti_lib_prcm_mcu_power_off(...)                 PRCMMcuPowerOff(__VA_ARGS__)
+#define ti_lib_prcm_mcu_power_off_cancel(...)          PRCMMcuPowerOffCancel(__VA_ARGS__)
+#define ti_lib_prcm_mcu_uldo_configure(...)            PRCMMcuUldoConfigure(__VA_ARGS__)
+#define ti_lib_prcm_clock_configure_set(...)           PRCMClockConfigureSet(__VA_ARGS__)
+#define ti_lib_prcm_clock_configure_get(...)           PRCMClockConfigureGet(__VA_ARGS__)
+#define ti_lib_prcm_audio_clock_enable(...)            PRCMAudioClockEnable(__VA_ARGS__)
+#define ti_lib_prcm_audio_clock_disable(...)           PRCMAudioClockDisable(__VA_ARGS__)
+#define ti_lib_prcm_audio_clock_config_set(...)        PRCMAudioClockConfigSet(__VA_ARGS__)
+#define ti_lib_prcm_load_set(...)                      PRCMLoadSet(__VA_ARGS__)
+#define ti_lib_prcm_load_get(...)                      PRCMLoadGet(__VA_ARGS__)
+#define ti_lib_prcm_domain_enable(...)                 PRCMDomainEnable(__VA_ARGS__)
+#define ti_lib_prcm_domain_disable(...)                PRCMDomainDisable(__VA_ARGS__)
+#define ti_lib_prcm_power_domain_on(...)               PRCMPowerDomainOn(__VA_ARGS__)
+#define ti_lib_prcm_power_domain_off(...)              PRCMPowerDomainOff(__VA_ARGS__)
+#define ti_lib_prcm_rf_power_down_when_idle(...)       PRCMRfPowerDownWhenIdle(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_run_enable(...)         PRCMPeripheralRunEnable(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_run_disable(...)        PRCMPeripheralRunDisable(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_sleep_enable(...)       PRCMPeripheralSleepEnable(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_sleep_disable(...)      PRCMPeripheralSleepDisable(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_deep_sleep_enable(...)  PRCMPeripheralDeepSleepEnable(__VA_ARGS__)
+#define ti_lib_prcm_peripheral_deep_sleep_disable(...) PRCMPeripheralDeepSleepDisable(__VA_ARGS__)
+#define ti_lib_prcm_power_domain_status(...)           PRCMPowerDomainStatus(__VA_ARGS__)
+#define ti_lib_prcm_rf_ready(...)                      PRCMRfReady(__VA_ARGS__)
+#define ti_lib_prcm_wdt_reset_status(...)              PRCMWdtResetStatus(__VA_ARGS__)
+#define ti_lib_prcm_sleep(...)                         PRCMSleep(__VA_ARGS__)
+#define ti_lib_prcm_deep_sleep(...)                    PRCMDeepSleep(__VA_ARGS__)
+#define ti_lib_prcm_retention_enable(...)              PRCMRetentionEnable(__VA_ARGS__)
+#define ti_lib_prcm_retention_disable(...)             PRCMRetentionDisable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* sys_ctrl.h */
+#include "driverlib/pwr_ctrl.h"
+
+#define ti_lib_pwr_ctrl_state_set(...)          PowerCtrlStateSet(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_source_set(...)         PowerCtrlSourceSet(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_source_get(...)         PowerCtrlSourceGet(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_io_config_set(...)      PowerCtrlIoConfigSet(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_reset_source_get(...)   PowerCtrlResetSourceGet(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_reset_source_clear(...) PowerCtrlResetSourceClear(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_io_freeze_enable(...)   PowerCtrlIOFreezeEnable(__VA_ARGS__)
+#define ti_lib_pwr_ctrl_io_freeze_disable(...)  PowerCtrlIOFreezeDisable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* rom.h */
+#include "driverlib/rom.h"
+
+/* AON API */
+#define ti_lib_rom_aon_event_mcu_wake_up_set          ROM_AONEventMcuWakeUpSet
+#define ti_lib_rom_aon_event_mcu_wake_up_get          ROM_AONEventMcuWakeUpGet
+#define ti_lib_rom_aon_event_aux_wake_up_set          ROM_AONEventAuxWakeUpSet
+#define ti_lib_rom_aon_event_aux_wake_up_get          ROM_AONEventAuxWakeUpGet
+#define ti_lib_rom_aon_event_mcu_set                  ROM_AONEventMcuSet
+#define ti_lib_rom_aon_event_mcu_get                  ROM_AONEventMcuGet
+
+/* AON_IOC API */
+#define ti_lib_rom_aon_ioc_drive_strength_set         ROM_AONIOCDriveStrengthSet
+#define ti_lib_rom_aon_ioc_drive_strength_get         ROM_AONIOCDriveStrengthGet
+
+/* AON_RTC API */
+#define ti_lib_rom_aon_rtc_status                     ROM_AONRTCStatus
+#define ti_lib_rom_aon_rtc_event_clear                ROM_AONRTCEventClear
+#define ti_lib_rom_aon_rtc_event_get                  ROM_AONRTCEventGet
+#define ti_lib_rom_aon_rtc_mode_ch1_set               ROM_AONRTCModeCh1Set
+#define ti_lib_rom_aon_rtc_mode_ch1_get               ROM_AONRTCModeCh1Get
+#define ti_lib_rom_aon_rtc_mode_ch2_set               ROM_AONRTCModeCh2Set
+#define ti_lib_rom_aon_rtc_mode_ch2_get               ROM_AONRTCModeCh2Get
+#define ti_lib_rom_aon_rtc_channel_enable             ROM_AONRTCChannelEnable
+#define ti_lib_rom_aon_rtc_channel_disable            ROM_AONRTCChannelDisable
+#define ti_lib_rom_aon_rtc_compare_value_set          ROM_AONRTCCompareValueSet
+#define ti_lib_rom_aon_rtc_compare_value_get          ROM_AONRTCCompareValueGet
+#define ti_lib_rom_aon_rtc_current_compare_value_get  ROM_AONRTCCurrentCompareValueGet
+
+/* AON_WUC API */
+#define ti_lib_rom_aon_wuc_aux_clock_config_set       ROM_AONWUCAuxClockConfigSet
+#define ti_lib_rom_aon_wuc_aux_s_ram_config           ROM_AONWUCAuxSRamConfig
+#define ti_lib_rom_aon_wuc_aux_wakeup_event           ROM_AONWUCAuxWakeupEvent
+#define ti_lib_rom_aon_wuc_aux_reset                  ROM_AONWUCAuxReset
+#define ti_lib_rom_aon_wuc_recharge_ctrl_config_set   ROM_AONWUCRechargeCtrlConfigSet
+#define ti_lib_rom_aon_wuc_osc_config                 ROM_AONWUCOscConfig
+
+/* AUX_TDC API */
+#define ti_lib_rom_aux_tdc_config_set                 ROM_AUXTDCConfigSet
+#define ti_lib_rom_aux_tdc_measurement_done           ROM_AUXTDCMeasurementDone
+
+/* AUX_TIMER API */
+#define ti_lib_rom_aux_timer_configure                ROM_AUXTimerConfigure
+#define ti_lib_rom_aux_timer_start                    ROM_AUXTimerStart
+#define ti_lib_rom_aux_timer_stop                     ROM_AUXTimerStop
+#define ti_lib_rom_aux_timer_prescale_set             ROM_AUXTimerPrescaleSet
+#define ti_lib_rom_aux_timer_prescale_get             ROM_AUXTimerPrescaleGet
+
+/* AUX_WUC API */
+#define ti_lib_rom_aux_wuc_clock_enable               ROM_AUXWUCClockEnable
+#define ti_lib_rom_aux_wuc_clock_disable              ROM_AUXWUCClockDisable
+#define ti_lib_rom_aux_wuc_clock_status               ROM_AUXWUCClockStatus
+#define ti_lib_rom_aux_wuc_power_ctrl                 ROM_AUXWUCPowerCtrl
+
+/* FLASH API */
+#define ti_lib_rom_flash_power_mode_get               ROM_FlashPowerModeGet
+#define ti_lib_rom_flash_protection_set               ROM_FlashProtectionSet
+#define ti_lib_rom_flash_protection_get               ROM_FlashProtectionGet
+#define ti_lib_rom_flash_protection_save              ROM_FlashProtectionSave
+#define ti_lib_rom_flash_sector_erase                 ROM_FlashSectorErase
+#define ti_lib_rom_flash_program                      ROM_FlashProgram
+#define ti_lib_rom_flash_program_nowait               ROM_FlashProgramNowait
+
+#define ti_lib_rom_flash_efuse_read_row               ROM_FlashEfuseReadRow
+#define ti_lib_rom_flash_disable_sectors_for_write    ROM_FlashDisableSectorsForWrite
+
+/* I2C API */
+#define ti_lib_rom_i2c_master_init_exp_clk            ROM_I2CMasterInitExpClk
+#define ti_lib_rom_i2c_master_err                     ROM_I2CMasterErr
+
+/* INTERRUPT API */
+#define ti_lib_rom_int_priority_grouping_set          ROM_IntPriorityGroupingSet
+#define ti_lib_rom_int_priority_grouping_get          ROM_IntPriorityGroupingGet
+#define ti_lib_rom_int_priority_set                   ROM_IntPrioritySet
+#define ti_lib_rom_int_priority_get                   ROM_IntPriorityGet
+#define ti_lib_rom_int_enable                         ROM_IntEnable
+#define ti_lib_rom_int_disable                        ROM_IntDisable
+#define ti_lib_rom_int_pend_set                       ROM_IntPendSet
+#define ti_lib_rom_int_pend_get                       ROM_IntPendGet
+#define ti_lib_rom_int_pend_clear                     ROM_IntPendClear
+
+/* IOC API */
+#define ti_lib_rom_ioc_port_configure_set             ROM_IOCPortConfigureSet
+#define ti_lib_rom_ioc_port_configure_get             ROM_IOCPortConfigureGet
+#define ti_lib_rom_ioc_io_shutdown_set                ROM_IOCIOShutdownSet
+#define ti_lib_rom_ioc_io_jtag_set                    ROM_IOCIOJTagSet
+#define ti_lib_rom_ioc_io_mode_set                    ROM_IOCIOModeSet
+#define ti_lib_rom_ioc_io_int_set                     ROM_IOCIOIntSet
+#define ti_lib_rom_ioc_io_port_pull_set               ROM_IOCIOPortPullSet
+#define ti_lib_rom_ioc_io_hyst_set                    ROM_IOCIOHystSet
+#define ti_lib_rom_ioc_io_input_set                   ROM_IOCIOInputSet
+#define ti_lib_rom_ioc_io_slew_ctrl_set               ROM_IOCIOSlewCtrlSet
+#define ti_lib_rom_ioc_io_drv_strength_set            ROM_IOCIODrvStrengthSet
+#define ti_lib_rom_ioc_io_port_id_set                 ROM_IOCIOPortIdSet
+#define ti_lib_rom_ioc_int_enable                     ROM_IOCIntEnable
+#define ti_lib_rom_ioc_int_disable                    ROM_IOCIntDisable
+#define ti_lib_rom_ioc_pin_type_gpio_input            ROM_IOCPinTypeGpioInput
+#define ti_lib_rom_ioc_pin_type_gpio_output           ROM_IOCPinTypeGpioOutput
+#define ti_lib_rom_ioc_pin_type_uart                  ROM_IOCPinTypeUart
+#define ti_lib_rom_ioc_pin_type_ssi_master            ROM_IOCPinTypeSsiMaster
+#define ti_lib_rom_ioc_pin_type_ssi_slave             ROM_IOCPinTypeSsiSlave
+#define ti_lib_rom_ioc_pin_type_i2c                   ROM_IOCPinTypeI2c
+#define ti_lib_rom_ioc_pin_type_spis                  ROM_IOCPinTypeSpis
+#define ti_lib_rom_ioc_pin_type_aux                   ROM_IOCPinTypeAux
+
+/* PRCM API */
+#define ti_lib_rom_prcm_inf_clock_configure_set       ROM_PRCMInfClockConfigureSet
+#define ti_lib_rom_prcm_inf_clock_configure_get       ROM_PRCMInfClockConfigureGet
+#define ti_lib_rom_prcm_clock_configure_set           ROM_PRCMClockConfigureSet
+#define ti_lib_rom_prcm_clock_configure_get           ROM_PRCMClockConfigureGet
+#define ti_lib_rom_prcm_audio_clock_config_set        ROM_PRCMAudioClockConfigSet
+#define ti_lib_rom_prcm_power_domain_on               ROM_PRCMPowerDomainOn
+#define ti_lib_rom_prcm_power_domain_off              ROM_PRCMPowerDomainOff
+#define ti_lib_rom_prcm_peripheral_run_enable         ROM_PRCMPeripheralRunEnable
+#define ti_lib_rom_prcm_peripheral_run_disable        ROM_PRCMPeripheralRunDisable
+#define ti_lib_rom_prcm_peripheral_sleep_enable       ROM_PRCMPeripheralSleepEnable
+#define ti_lib_rom_prcm_peripheral_sleep_disable      ROM_PRCMPeripheralSleepDisable
+#define ti_lib_rom_prcm_peripheral_deep_sleep_enable  ROM_PRCMPeripheralDeepSleepEnable
+#define ti_lib_rom_prcm_peripheral_deep_sleep_disable ROM_PRCMPeripheralDeepSleepDisable
+#define ti_lib_rom_prcm_power_domain_status           ROM_PRCMPowerDomainStatus
+#define ti_lib_rom_prcm_deep_sleep                    ROM_PRCMDeepSleep
+#define ti_lib_rom_prcm_retention_enable              ROM_PRCMRetentionEnable
+#define ti_lib_rom_prcm_retention_disable             ROM_PRCMRetentionDisable
+
+/* SMPH API */
+#define ti_lib_rom_smph_acquire                       ROM_SMPHAcquire
+
+/* SPIS API */
+#define ti_lib_rom_spis_data_put                      ROM_SPISDataPut
+#define ti_lib_rom_spis_tx_get_value                  ROM_SPISTxGetValue
+#define ti_lib_rom_spis_data_get                      ROM_SPISDataGet
+#define ti_lib_rom_spis_rx_get_value                  ROM_SPISRxGetValue
+#define ti_lib_rom_spis_int_status                    ROM_SPISIntStatus
+
+/* SSI API */
+#define ti_lib_rom_ssi_config_set_exp_clk             ROM_SSIConfigSetExpClk
+#define ti_lib_rom_ssi_data_put                       ROM_SSIDataPut
+#define ti_lib_rom_ssi_data_put_non_blocking          ROM_SSIDataPutNonBlocking
+#define ti_lib_rom_ssi_data_get                       ROM_SSIDataGet
+#define ti_lib_rom_ssi_data_get_non_blocking          ROM_SSIDataGetNonBlocking
+
+/* TIMER API */
+#define ti_lib_rom_timer_configure                    ROM_TimerConfigure
+#define ti_lib_rom_timer_level_control                ROM_TimerLevelControl
+#define ti_lib_rom_timer_trigger_control              ROM_TimerTriggerControl
+#define ti_lib_rom_timer_stall_control                ROM_TimerStallControl
+#define ti_lib_rom_timer_wait_on_trigger_control      ROM_TimerWaitOnTriggerControl
+
+/* TRNG API */
+#define ti_lib_rom_trng_configure                     ROM_TRNGConfigure
+#define ti_lib_rom_trng_number_get                    ROM_TRNGNumberGet
+
+/* UART API */
+#define ti_lib_rom_uart_fifo_level_get                ROM_UARTFIFOLevelGet
+#define ti_lib_rom_uart_config_set_exp_clk            ROM_UARTConfigSetExpClk
+#define ti_lib_rom_uart_config_get_exp_clk            ROM_UARTConfigGetExpClk
+#define ti_lib_rom_uart_disable                       ROM_UARTDisable
+#define ti_lib_rom_uart_char_get_non_blocking         ROM_UARTCharGetNonBlocking
+#define ti_lib_rom_uart_char_get                      ROM_UARTCharGet
+#define ti_lib_rom_uart_char_put_non_blocking         ROM_UARTCharPutNonBlocking
+#define ti_lib_rom_uart_char_put                      ROM_UARTCharPut
+
+/* UDMA API */
+#define ti_lib_rom_udma_channel_attribute_enable      ROM_uDMAChannelAttributeEnable
+#define ti_lib_rom_udma_channel_attribute_disable     ROM_uDMAChannelAttributeDisable
+#define ti_lib_rom_udma_channel_attribute_get         ROM_uDMAChannelAttributeGet
+#define ti_lib_rom_udma_channel_control_set           ROM_uDMAChannelControlSet
+#define ti_lib_rom_udma_channel_transfer_set          ROM_uDMAChannelTransferSet
+#define ti_lib_rom_udma_channel_scatter_gather_set    ROM_uDMAChannelScatterGatherSet
+#define ti_lib_rom_udma_channel_size_get              ROM_uDMAChannelSizeGet
+#define ti_lib_rom_udma_channel_mode_get              ROM_uDMAChannelModeGet
+
+/* VIMS API */
+#define ti_lib_rom_vims_configure                     ROM_VIMSConfigure
+#define ti_lib_rom_vims_mode_set                      ROM_VIMSModeSet
+#define ti_lib_rom_vims_mode_get                      ROM_VIMSModeGet
+/*---------------------------------------------------------------------------*/
+/* sys_ctrl.h */
+#include "driverlib/sys_ctrl.h"
+
+#define ti_lib_sys_ctrl_power_everything(...)                 SysCtrlPowerEverything(__VA_ARGS__)
+#define ti_lib_sys_ctrl_powerdown(...)                        SysCtrlPowerdown(__VA_ARGS__)
+#define ti_lib_sys_ctrl_standby(...)                          SysCtrlStandby(__VA_ARGS__)
+#define ti_lib_sys_ctrl_shutdown(...)                         SysCtrlShutdown(__VA_ARGS__)
+#define ti_lib_sys_ctrl_clock_get(...)                        SysCtrlClockGet(__VA_ARGS__)
+#define ti_lib_sys_ctrl_peripheral_clock_get(...)             SysCtrlPeripheralClockGet(__VA_ARGS__)
+#define ti_lib_sys_ctrl_aon_sync(...)                         SysCtrlAonSync(__VA_ARGS__)
+#define ti_lib_sys_ctrl_aon_update(...)                       SysCtrlAonUpdate(__VA_ARGS__)
+#define ti_lib_sys_ctrl_set_recharge_before_power_down(...)   SysCtrlSetRechargeBeforePowerDown(__VA_ARGS__)
+#define ti_lib_sys_ctrl_adjust_recharge_after_power_down(...) SysCtrlAdjustRechargeAfterPowerDown(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* ssi.h */
+#include "driverlib/ssi.h"
+
+#define ti_lib_ssi_config_set_exp_clk(...)    SSIConfigSetExpClk(__VA_ARGS__)
+#define ti_lib_ssi_enable(...)                SSIEnable(__VA_ARGS__)
+#define ti_lib_ssi_disable(...)               SSIDisable(__VA_ARGS__)
+#define ti_lib_ssi_data_put(...)              SSIDataPut(__VA_ARGS__)
+#define ti_lib_ssi_data_put_non_blocking(...) SSIDataPutNonBlocking(__VA_ARGS__)
+#define ti_lib_ssi_data_get(...)              SSIDataGet(__VA_ARGS__)
+#define ti_lib_ssi_data_get_non_blocking(...) SSIDataGetNonBlocking(__VA_ARGS__)
+#define ti_lib_ssi_busy(...)                  SSIBusy(__VA_ARGS__)
+#define ti_lib_ssi_status(...)                SSIStatus(__VA_ARGS__)
+#define ti_lib_ssi_int_register(...)          SSIIntRegister(__VA_ARGS__)
+#define ti_lib_ssi_int_unregister(...)        SSIIntUnregister(__VA_ARGS__)
+#define ti_lib_ssi_int_enable(...)            SSIIntEnable(__VA_ARGS__)
+#define ti_lib_ssi_int_disable(...)           SSIIntDisable(__VA_ARGS__)
+#define ti_lib_ssi_int_clear(...)             SSIIntClear(__VA_ARGS__)
+#define ti_lib_ssi_int_status(...)            SSIIntStatus(__VA_ARGS__)
+#define ti_lib_ssi_dma_enable(...)            SSIDMAEnable(__VA_ARGS__)
+#define ti_lib_ssi_dma_disable(...)           SSIDMADisable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* systick.h */
+#include "driverlib/systick.h"
+
+#define ti_lib_systick_enable(...)         SysTickEnable(__VA_ARGS__)
+#define ti_lib_systick_disable(...)        SysTickDisable(__VA_ARGS__)
+#define ti_lib_systick_int_register(...)   SysTickIntRegister(__VA_ARGS__)
+#define ti_lib_systick_int_unregister(...) SysTickIntUnregister(__VA_ARGS__)
+#define ti_lib_systick_int_enable(...)     SysTickIntEnable(__VA_ARGS__)
+#define ti_lib_systick_int_disable(...)    SysTickIntDisable(__VA_ARGS__)
+#define ti_lib_systick_period_set(...)     SysTickPeriodSet(__VA_ARGS__)
+#define ti_lib_systick_period_get(...)     SysTickPeriodGet(__VA_ARGS__)
+#define ti_lib_systick_value_get(...)      SysTickValueGet(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* timer.h */
+#include "driverlib/timer.h"
+
+#define ti_lib_timer_enable(...)                  TimerEnable(__VA_ARGS__)
+#define ti_lib_timer_disable(...)                 TimerDisable(__VA_ARGS__)
+#define ti_lib_timer_configure(...)               TimerConfigure(__VA_ARGS__)
+#define ti_lib_timer_level_control(...)           TimerLevelControl(__VA_ARGS__)
+#define ti_lib_timer_trigger_control(...)         TimerTriggerControl(__VA_ARGS__)
+#define ti_lib_timer_event_control(...)           TimerEventControl(__VA_ARGS__)
+#define ti_lib_timer_stall_control(...)           TimerStallControl(__VA_ARGS__)
+#define ti_lib_timer_wait_on_trigger_control(...) TimerWaitOnTriggerControl(__VA_ARGS__)
+#define ti_lib_timer_rtc_enable(...)              TimerRtcEnable(__VA_ARGS__)
+#define ti_lib_timer_rtc_disable(...)             TimerRtcDisable(__VA_ARGS__)
+#define ti_lib_timer_prescale_set(...)            TimerPrescaleSet(__VA_ARGS__)
+#define ti_lib_timer_prescale_get(...)            TimerPrescaleGet(__VA_ARGS__)
+#define ti_lib_timer_prescale_match_set(...)      TimerPrescaleMatchSet(__VA_ARGS__)
+#define ti_lib_timer_prescale_match_get(...)      TimerPrescaleMatchGet(__VA_ARGS__)
+#define ti_lib_timer_load_set(...)                TimerLoadSet(__VA_ARGS__)
+#define ti_lib_timer_load_get(...)                TimerLoadGet(__VA_ARGS__)
+#define ti_lib_timer_value_get(...)               TimerValueGet(__VA_ARGS__)
+#define ti_lib_timer_match_set(...)               TimerMatchSet(__VA_ARGS__)
+#define ti_lib_timer_match_get(...)               TimerMatchGet(__VA_ARGS__)
+#define ti_lib_timer_int_register(...)            TimerIntRegister(__VA_ARGS__)
+#define ti_lib_timer_int_unregister(...)          TimerIntUnregister(__VA_ARGS__)
+#define ti_lib_timer_int_enable(...)              TimerIntEnable(__VA_ARGS__)
+#define ti_lib_timer_int_disable(...)             TimerIntDisable(__VA_ARGS__)
+#define ti_lib_timer_int_status(...)              TimerIntStatus(__VA_ARGS__)
+#define ti_lib_timer_int_clear(...)               TimerIntClear(__VA_ARGS__)
+#define ti_lib_timer_synchronize(...)             TimerSynchronize(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* uart.h */
+#include "driverlib/uart.h"
+
+#define ti_lib_uart_parity_mode_set(...)       UARTParityModeSet(__VA_ARGS__)
+#define ti_lib_uart_parity_mode_get(...)       UARTParityModeGet(__VA_ARGS__)
+#define ti_lib_uart_fifo_level_set(...)        UARTFIFOLevelSet(__VA_ARGS__)
+#define ti_lib_uart_fifo_level_get(...)        UARTFIFOLevelGet(__VA_ARGS__)
+#define ti_lib_uart_config_set_exp_clk(...)    UARTConfigSetExpClk(__VA_ARGS__)
+#define ti_lib_uart_config_get_exp_clk(...)    UARTConfigGetExpClk(__VA_ARGS__)
+#define ti_lib_uart_enable(...)                UARTEnable(__VA_ARGS__)
+#define ti_lib_uart_disable(...)               UARTDisable(__VA_ARGS__)
+#define ti_lib_uart_fifo_enable(...)           UARTFIFOEnable(__VA_ARGS__)
+#define ti_lib_uart_fifo_disable(...)          UARTFIFODisable(__VA_ARGS__)
+#define ti_lib_uart_chars_avail(...)           UARTCharsAvail(__VA_ARGS__)
+#define ti_lib_uart_space_avail(...)           UARTSpaceAvail(__VA_ARGS__)
+#define ti_lib_uart_char_get_non_blocking(...) UARTCharGetNonBlocking(__VA_ARGS__)
+#define ti_lib_uart_char_get(...)              UARTCharGet(__VA_ARGS__)
+#define ti_lib_uart_char_put_non_blocking(...) UARTCharPutNonBlocking(__VA_ARGS__)
+#define ti_lib_uart_char_put(...)              UARTCharPut(__VA_ARGS__)
+#define ti_lib_uart_break_ctl(...)             UARTBreakCtl(__VA_ARGS__)
+#define ti_lib_uart_busy(...)                  UARTBusy(__VA_ARGS__)
+#define ti_lib_uart_int_register(...)          UARTIntRegister(__VA_ARGS__)
+#define ti_lib_uart_int_unregister(...)        UARTIntUnregister(__VA_ARGS__)
+#define ti_lib_uart_int_enable(...)            UARTIntEnable(__VA_ARGS__)
+#define ti_lib_uart_int_disable(...)           UARTIntDisable(__VA_ARGS__)
+#define ti_lib_uart_int_status(...)            UARTIntStatus(__VA_ARGS__)
+#define ti_lib_uart_int_clear(...)             UARTIntClear(__VA_ARGS__)
+#define ti_lib_uart_dma_enable(...)            UARTDMAEnable(__VA_ARGS__)
+#define ti_lib_uart_dma_disable(...)           UARTDMADisable(__VA_ARGS__)
+#define ti_lib_uart_rx_error_get(...)          UARTRxErrorGet(__VA_ARGS__)
+#define ti_lib_uart_rx_error_clear(...)        UARTRxErrorClear(__VA_ARGS__)
+#define ti_lib_uart_tx_int_mode_set(...)       UARTTxIntModeSet(__VA_ARGS__)
+#define ti_lib_uart_tx_int_mode_get(...)       UARTTxIntModeGet(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* vims.h */
+#include "driverlib/vims.h"
+
+#define ti_lib_vims_configure(...) VIMSConfigure(__VA_ARGS__)
+#define ti_lib_vims_mode_set(...)  VIMSModeSet(__VA_ARGS__)
+#define ti_lib_vims_mode_get(...)  VIMSModeGet(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+/* watchdog.h */
+#include "driverlib/watchdog.h"
+
+#define ti_lib_wathdog_running(...)        WatchdogRunning(__VA_ARGS__)
+#define ti_lib_wathdog_enable(...)         WatchdogEnable(__VA_ARGS__)
+#define ti_lib_wathdog_reset_enable(...)   WatchdogResetEnable(__VA_ARGS__)
+#define ti_lib_wathdog_reset_disable(...)  WatchdogResetDisable(__VA_ARGS__)
+#define ti_lib_wathdog_lock(...)           WatchdogLock(__VA_ARGS__)
+#define ti_lib_wathdog_unlock(...)         WatchdogUnlock(__VA_ARGS__)
+#define ti_lib_wathdog_lock_state(...)     WatchdogLockState(__VA_ARGS__)
+#define ti_lib_wathdog_reload_set(...)     WatchdogReloadSet(__VA_ARGS__)
+#define ti_lib_wathdog_reload_get(...)     WatchdogReloadGet(__VA_ARGS__)
+#define ti_lib_wathdog_value_get(...)      WatchdogValueGet(__VA_ARGS__)
+#define ti_lib_wathdog_int_register(...)   WatchdogIntRegister(__VA_ARGS__)
+#define ti_lib_wathdog_int_unregister(...) WatchdogIntUnregister(__VA_ARGS__)
+#define ti_lib_wathdog_int_enable(...)     WatchdogIntEnable(__VA_ARGS__)
+#define ti_lib_wathdog_int_status(...)     WatchdogIntStatus(__VA_ARGS__)
+#define ti_lib_wathdog_int_clear(...)      WatchdogIntClear(__VA_ARGS__)
+#define ti_lib_wathdog_int_type_set(...)   WatchdogIntTypeSet(__VA_ARGS__)
+#define ti_lib_wathdog_stall_enable(...)   WatchdogStallEnable(__VA_ARGS__)
+#define ti_lib_wathdog_stall_disable(...)  WatchdogStallDisable(__VA_ARGS__)
+/*---------------------------------------------------------------------------*/
+#endif /* TI_LIB_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

cpu/msp430/Makefile.msp430

@@ -151,7 +151,7 @@ ifneq (,$(findstring 4.7.,$(shell msp430-gcc -dumpversion)))
 ifdef CPU_HAS_MSP430X
   TARGET_MEMORY_MODEL ?= medium
   CFLAGS += -mmemory-model=$(TARGET_MEMORY_MODEL)
-  CFLAGS += -ffunction-sections -fdata-sections -mcode-region=far
+  CFLAGS += -ffunction-sections -fdata-sections -mcode-region=any
   LDFLAGS += -mmemory-model=$(TARGET_MEMORY_MODEL) -Wl,-gc-sections
 endif
 endif

dev/cc2420/cc2420.c

@@ -152,6 +152,7 @@ static int cc2420_send(const void *data, unsigned short len);
 
 static int cc2420_receiving_packet(void);
 static int pending_packet(void);
+static int get_cca_threshold(void);
 static int cc2420_cca(void);
 
 signed char cc2420_last_rssi;
@@ -186,6 +187,9 @@ get_value(radio_param_t param, radio_value_t *value)
       }
     }
     return RADIO_RESULT_OK;
+  case RADIO_PARAM_CCA_THRESHOLD:
+    *value = get_cca_threshold() + RSSI_OFFSET;
+    return RADIO_RESULT_OK;
   case RADIO_PARAM_RSSI:
     /* Return the RSSI value in dBm */
     *value = cc2420_rssi();
@@ -241,6 +245,9 @@ set_value(radio_param_t param, radio_value_t value)
     }
     cc2420_set_txpower(output_power[i - 1].config);
     return RADIO_RESULT_OK;
+  case RADIO_PARAM_CCA_THRESHOLD:
+    cc2420_set_cca_threshold(value - RSSI_OFFSET);
+    return RADIO_RESULT_OK;
   default:
     return RADIO_RESULT_NOT_SUPPORTED;
   }
@@ -1033,6 +1040,17 @@ pending_packet(void)
   return CC2420_FIFOP_IS_1;
 }
 /*---------------------------------------------------------------------------*/
+static int
+get_cca_threshold(void)
+{
+  int value;
+
+  GET_LOCK();
+  value = (int8_t)(getreg(CC2420_RSSI) >> 8);
+  RELEASE_LOCK();
+  return value;
+}
+/*---------------------------------------------------------------------------*/
 void
 cc2420_set_cca_threshold(int value)
 {

doc/Doxyfile

@@ -1910,7 +1910,7 @@ ENABLE_PREPROCESSING   = YES
 # The default value is: NO.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
 
-MACRO_EXPANSION        = NO
+MACRO_EXPANSION        = YES
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
 # the macro expansion is limited to the macros specified with the PREDEFINED and

examples/cc26xx/Makefile

@@ -0,0 +1,9 @@
+DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
+CONTIKI_PROJECT = cc26xx-demo
+
+all: $(CONTIKI_PROJECT)
+
+CONTIKI_WITH_IPV6 = 1
+
+CONTIKI = ../..
+include $(CONTIKI)/Makefile.include

examples/cc26xx/Makefile.target

@@ -0,0 +1 @@
+TARGET = srf06-cc26xx

examples/cc26xx/README.md

@@ -0,0 +1,15 @@
+CC26xx Demo
+===========
+This example demonstrates basic functionality for the two supported CC26xx
+boards. More specifically, the example demonstrates:
+
+* How to take sensor readings
+* How to use buttons and the reed relay (triggered by holding a magnet near S3
+  on the SensorTag).
+* How to keep a power domain powered and a peripheral clocked under low power
+  operation
+* How to send out BLE advertisements. The device will periodically send out BLE
+  beacons with the platform name as payload. Those beacons/BLE ADV packets can
+  be captured with any BLE capable device. Two such applications for iOS are the
+  TI Multitool and the TI Sensortag app. They can be found in the Apple App
+  Store. If you have a BLE-capable Mac, you can also use LightBlue for OS X.

examples/cc26xx/cc26xx-demo.c

@@ -0,0 +1,477 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-platforms
+ * @{
+ *
+ * \defgroup cc26xx-examples CC26xx Example Projects
+ *
+ * Example projects for CC26xx-based platforms.
+ * @{
+ *
+ * \defgroup cc26xx-demo CC26xx Demo Project
+ *
+ *   Example project demonstrating the CC26xx platforms
+ *
+ *   This example will work for the following boards:
+ *   - srf06-cc26xx: SmartRF06EB + CC26XX EM
+ *   - sensortag-cc26xx: CC26XX sensortag
+ *
+ *   By default, the example will build for the srf06-cc26xx board. To switch
+ *   between platforms:
+ *   - make clean
+ *   - make BOARD=sensortag-cc26xx savetarget
+ *
+ *     or
+ *
+ *     make BOARD=srf06-cc26xx savetarget
+ *
+ *   This is an IPv6/RPL-enabled example. Thus, if you have a border router in
+ *   your installation (same RDC layer, same PAN ID and RF channel), you should
+ *   be able to ping6 this demo node.
+ *
+ *   This example also demonstrates CC26xx BLE operation. The process starts
+ *   the BLE beacon daemon (implemented in the RF driver). The daemon will
+ *   send out a BLE beacon periodically. Use any BLE-enabled application (e.g.
+ *   LightBlue on OS X or the TI BLE Multitool smartphone app) and after a few
+ *   seconds the cc26xx device will be discovered.
+ *
+ * - etimer/clock : Every CC26XX_DEMO_LOOP_INTERVAL clock ticks the LED defined
+ *                  as CC26XX_DEMO_LEDS_PERIODIC will toggle and the device
+ *                  will print out readings from some supported sensors
+ * - sensors      : Some sensortag sensors are read asynchronously (see sensor
+ *                  documentation). For those, this example will print out
+ *                  readings in a staggered fashion at a random interval
+ * - Buttons      : CC26XX_DEMO_SENSOR_1 button will toggle CC26XX_DEMO_LEDS_BUTTON
+ *                - CC26XX_DEMO_SENSOR_2 turns on LEDS_REBOOT and causes a
+ *                  watchdog reboot
+ *                - The remaining buttons will just print something
+ *                - The example also shows how to retrieve the duration of a
+ *                  button press (in ticks). The driver will generate a
+ *                  sensors_changed event upon button release
+ * - UART         : Receiving an entire line of text over UART (ending
+ *                  in \\r) will cause CC26XX_DEMO_LEDS_SERIAL_IN to toggle
+ *                  This also demonstrates how a code module can influence
+ *                  low-power operation: In this example we keep the UART on
+ *                  and capable to RX even with the chip in deep sleep.
+ *                  see keep_uart_on() and the UART driver
+ * - Reed Relay   : Will toggle the sensortag buzzer on/off
+ *
+ * @{
+ *
+ * \file
+ *     Example demonstrating the cc26xx platforms
+ */
+#include "contiki.h"
+#include "sys/etimer.h"
+#include "sys/ctimer.h"
+#include "dev/leds.h"
+#include "dev/serial-line.h"
+#include "dev/watchdog.h"
+#include "random.h"
+#include "button-sensor.h"
+#include "batmon-sensor.h"
+#include "board-peripherals.h"
+#include "lpm.h"
+#include "cc26xx-rf.h"
+
+#include "ti-lib.h"
+
+#include <stdio.h>
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#define CC26XX_DEMO_LOOP_INTERVAL       (CLOCK_SECOND * 20)
+#define CC26XX_DEMO_LEDS_PERIODIC       LEDS_YELLOW
+#define CC26XX_DEMO_LEDS_BUTTON         LEDS_RED
+#define CC26XX_DEMO_LEDS_SERIAL_IN      LEDS_ORANGE
+#define CC26XX_DEMO_LEDS_REBOOT         LEDS_ALL
+/*---------------------------------------------------------------------------*/
+#define CC26XX_DEMO_SENSOR_NONE         (void *)0xFFFFFFFF
+
+#define CC26XX_DEMO_SENSOR_1     &button_left_sensor
+#define CC26XX_DEMO_SENSOR_2     &button_right_sensor
+
+#if BOARD_SENSORTAG
+#define CC26XX_DEMO_SENSOR_3     CC26XX_DEMO_SENSOR_NONE
+#define CC26XX_DEMO_SENSOR_4     CC26XX_DEMO_SENSOR_NONE
+#define CC26XX_DEMO_SENSOR_5     &reed_relay_sensor
+#else
+#define CC26XX_DEMO_SENSOR_3     &button_up_sensor
+#define CC26XX_DEMO_SENSOR_4     &button_down_sensor
+#define CC26XX_DEMO_SENSOR_5     &button_select_sensor
+#endif
+/*---------------------------------------------------------------------------*/
+static struct etimer et;
+/*---------------------------------------------------------------------------*/
+PROCESS(cc26xx_demo_process, "cc26xx demo process");
+AUTOSTART_PROCESSES(&cc26xx_demo_process);
+/*---------------------------------------------------------------------------*/
+#if BOARD_SENSORTAG
+/*---------------------------------------------------------------------------*/
+/*
+ * Update sensor readings in a staggered fashion every SENSOR_READING_PERIOD
+ * ticks + a random interval between 0 and SENSOR_READING_RANDOM ticks
+ */
+#define SENSOR_READING_PERIOD (CLOCK_SECOND * 20)
+#define SENSOR_READING_RANDOM (CLOCK_SECOND << 4)
+
+static struct ctimer bmp_timer, opt_timer, sht_timer, tmp_timer, mpu_timer;
+/*---------------------------------------------------------------------------*/
+static void init_bmp_reading(void *not_used);
+static void init_opt_reading(void *not_used);
+static void init_sht_reading(void *not_used);
+static void init_tmp_reading(void *not_used);
+static void init_mpu_reading(void *not_used);
+/*---------------------------------------------------------------------------*/
+static void
+print_mpu_reading(int reading)
+{
+  if(reading < 0) {
+    printf("-");
+    reading = -reading;
+  }
+
+  printf("%d.%02d", reading / 100, reading % 100);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_bmp_reading()
+{
+  int value;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  value = bmp_280_sensor.value(BMP_280_SENSOR_TYPE_PRESS);
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    printf("BAR: Pressure=%d.%02d hPa\n", value / 100, value % 100);
+  } else {
+    printf("BAR: Pressure Read Error\n");
+  }
+
+  value = bmp_280_sensor.value(BMP_280_SENSOR_TYPE_TEMP);
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    printf("BAR: Temp=%d.%02d C\n", value / 100, value % 100);
+  } else {
+    printf("BAR: Temperature Read Error\n");
+  }
+
+  SENSORS_DEACTIVATE(bmp_280_sensor);
+
+  ctimer_set(&bmp_timer, next, init_bmp_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_tmp_reading()
+{
+  int value;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  value = tmp_007_sensor.value(TMP_007_SENSOR_TYPE_ALL);
+
+  if(value == CC26XX_SENSOR_READING_ERROR) {
+    printf("TMP: Ambient Read Error\n");
+    return;
+  }
+
+  value = tmp_007_sensor.value(TMP_007_SENSOR_TYPE_AMBIENT);
+  printf("TMP: Ambient=%d.%03d C\n", value / 1000, value % 1000);
+
+  value = tmp_007_sensor.value(TMP_007_SENSOR_TYPE_OBJECT);
+  printf("TMP: Object=%d.%03d C\n", value / 1000, value % 1000);
+
+  SENSORS_DEACTIVATE(tmp_007_sensor);
+
+  ctimer_set(&tmp_timer, next, init_tmp_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_sht_reading()
+{
+  int value;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  value = sht_21_sensor.value(SHT_21_SENSOR_TYPE_TEMP);
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    printf("SHT: Temp=%d.%02d C\n", value / 100, value % 100);
+  } else {
+    printf("SHT: Temp Read Error\n");
+  }
+
+  value = sht_21_sensor.value(SHT_21_SENSOR_TYPE_HUMIDITY);
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    printf("SHT: Humidity=%d.%02d %%RH\n", value / 100, value % 100);
+  } else {
+    printf("SHT: Humidity Read Error\n");
+  }
+
+  ctimer_set(&sht_timer, next, init_sht_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_light_reading()
+{
+  int value;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  value = opt_3001_sensor.value(0);
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    printf("OPT: Light=%d.%02d lux\n", value / 100, value % 100);
+  } else {
+    printf("OPT: Light Read Error\n");
+  }
+
+  SENSORS_DEACTIVATE(opt_3001_sensor);
+
+  ctimer_set(&opt_timer, next, init_opt_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_mpu_reading()
+{
+  int value;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  printf("MPU Gyro: X=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_X);
+  print_mpu_reading(value);
+  printf(" deg/sec\n");
+
+  printf("MPU Gyro: Y=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_Y);
+  print_mpu_reading(value);
+  printf(" deg/sec\n");
+
+  printf("MPU Gyro: Z=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_Z);
+  print_mpu_reading(value);
+  printf(" deg/sec\n");
+
+  printf("MPU Acc: X=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_X);
+  print_mpu_reading(value);
+  printf(" G\n");
+
+  printf("MPU Acc: Y=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_Y);
+  print_mpu_reading(value);
+  printf(" G\n");
+
+  printf("MPU Acc: Z=");
+  value = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_Z);
+  print_mpu_reading(value);
+  printf(" G\n");
+
+  SENSORS_DEACTIVATE(mpu_9250_sensor);
+
+  ctimer_set(&mpu_timer, next, init_mpu_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_bmp_reading(void *not_used)
+{
+  SENSORS_ACTIVATE(bmp_280_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_opt_reading(void *not_used)
+{
+  SENSORS_ACTIVATE(opt_3001_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_sht_reading(void *not_used)
+{
+  SENSORS_ACTIVATE(sht_21_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_tmp_reading(void *not_used)
+{
+  SENSORS_ACTIVATE(tmp_007_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_mpu_reading(void *not_used)
+{
+  mpu_9250_sensor.configure(SENSORS_ACTIVE, MPU_9250_SENSOR_TYPE_ALL);
+}
+#endif
+/*---------------------------------------------------------------------------*/
+static void
+get_sync_sensor_readings(void)
+{
+  int value;
+
+  printf("-----------------------------------------\n");
+
+  value = batmon_sensor.value(BATMON_SENSOR_TYPE_TEMP);
+  printf("Bat: Temp=%d.%02d C (%08x)\n", value >> 2,
+         (value & 0x00000003) * 25, value);
+
+  value = batmon_sensor.value(BATMON_SENSOR_TYPE_VOLT);
+  printf("Bat: Volt=%d mV\n", (value * 125) >> 5);
+
+  return;
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_sensors(void)
+{
+#if BOARD_SENSORTAG
+  SENSORS_ACTIVATE(reed_relay_sensor);
+#endif
+
+  SENSORS_ACTIVATE(batmon_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_sensor_readings(void)
+{
+#if BOARD_SENSORTAG
+  SENSORS_ACTIVATE(sht_21_sensor);
+  SENSORS_ACTIVATE(tmp_007_sensor);
+  SENSORS_ACTIVATE(opt_3001_sensor);
+  SENSORS_ACTIVATE(bmp_280_sensor);
+
+  init_mpu_reading(NULL);
+#endif
+}
+/*---------------------------------------------------------------------------*/
+static lpm_power_domain_lock_t lock;
+/*---------------------------------------------------------------------------*/
+/*
+ * In order to maintain UART input operation:
+ * - Keep the uart clocked in sleep and deep sleep
+ * - Keep the serial PD on in deep sleep
+ */
+static void
+keep_uart_on(void)
+{
+  /* Keep the serial PD on */
+  lpm_pd_lock_obtain(&lock, PRCM_DOMAIN_SERIAL);
+
+  /* Keep the UART clock on during Sleep and Deep Sleep */
+  ti_lib_prcm_peripheral_sleep_enable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_peripheral_deep_sleep_enable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(cc26xx_demo_process, ev, data)
+{
+
+  PROCESS_BEGIN();
+
+  printf("CC26XX demo\n");
+
+  init_sensors();
+
+  /* Init the BLE advertisement daemon */
+  cc26xx_rf_ble_beacond_config(0, BOARD_STRING);
+  cc26xx_rf_ble_beacond_start();
+
+  etimer_set(&et, CC26XX_DEMO_LOOP_INTERVAL);
+  get_sync_sensor_readings();
+  init_sensor_readings();
+
+  keep_uart_on();
+
+  while(1) {
+
+    PROCESS_YIELD();
+
+    if(ev == PROCESS_EVENT_TIMER) {
+      if(data == &et) {
+        leds_toggle(CC26XX_DEMO_LEDS_PERIODIC);
+
+        get_sync_sensor_readings();
+
+        etimer_set(&et, CC26XX_DEMO_LOOP_INTERVAL);
+      }
+    } else if(ev == sensors_event) {
+      if(data == CC26XX_DEMO_SENSOR_1) {
+        printf("Left: Pin %d, press duration %d clock ticks\n",
+               (CC26XX_DEMO_SENSOR_1)->value(BUTTON_SENSOR_VALUE_STATE),
+               (CC26XX_DEMO_SENSOR_1)->value(BUTTON_SENSOR_VALUE_DURATION));
+
+        if((CC26XX_DEMO_SENSOR_1)->value(BUTTON_SENSOR_VALUE_DURATION) >
+           CLOCK_SECOND) {
+          printf("Long button press!\n");
+        }
+
+        leds_toggle(CC26XX_DEMO_LEDS_BUTTON);
+      } else if(data == CC26XX_DEMO_SENSOR_2) {
+        leds_on(CC26XX_DEMO_LEDS_REBOOT);
+        watchdog_reboot();
+      } else if(data == CC26XX_DEMO_SENSOR_3) {
+        printf("Up\n");
+      } else if(data == CC26XX_DEMO_SENSOR_4) {
+        printf("Down\n");
+      } else if(data == CC26XX_DEMO_SENSOR_5) {
+#if BOARD_SENSORTAG
+        if(buzzer_state()) {
+          buzzer_stop();
+        } else {
+          buzzer_start(1000);
+        }
+      } else if(ev == sensors_event && data == &bmp_280_sensor) {
+        get_bmp_reading();
+      } else if(ev == sensors_event && data == &opt_3001_sensor) {
+        get_light_reading();
+      } else if(ev == sensors_event && data == &sht_21_sensor) {
+        get_sht_reading();
+      } else if(ev == sensors_event && data == &tmp_007_sensor) {
+        get_tmp_reading();
+      } else if(ev == sensors_event && data == &mpu_9250_sensor) {
+        get_mpu_reading();
+#else
+        printf("Sel: Pin %d, press duration %d clock ticks\n",
+               button_select_sensor.value(BUTTON_SENSOR_VALUE_STATE),
+               button_select_sensor.value(BUTTON_SENSOR_VALUE_DURATION));
+#endif
+      }
+    } else if(ev == serial_line_event_message) {
+      leds_toggle(CC26XX_DEMO_LEDS_SERIAL_IN);
+    }
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/Makefile

@@ -0,0 +1,24 @@
+DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
+
+all: cc26xx-web-demo
+
+REST_RESOURCES_DIR = ./resources
+
+REST_RESOURCES_FILES += res-leds.c res-toggle-leds.c res-device.c
+REST_RESOURCES_FILES += res-sensors.c res-ble-advd.c
+
+PROJECTDIRS += $(REST_RESOURCES_DIR)
+PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)
+
+PROJECT_SOURCEFILES += cetic-6lbr-client.c coap-server.c net-uart.c mqtt-client.c
+PROJECT_SOURCEFILES += httpd-simple.c
+
+CONTIKI_WITH_IPV6 = 1
+
+# REST Engine shall use Erbium CoAP implementation
+APPS += er-coap
+APPS += rest-engine
+APPS += mqtt
+
+CONTIKI=../../..
+include $(CONTIKI)/Makefile.include

examples/cc26xx/cc26xx-web-demo/Makefile.target

@@ -0,0 +1 @@
+TARGET = srf06-cc26xx

examples/cc26xx/cc26xx-web-demo/README.md

@@ -0,0 +1,169 @@
+CC26xx Web Demo Readme
+======================
+This demo project combines a number of web-based applications aiming to
+demonstrate the CC26xx capability. The applications are:
+
+* A network-based UART
+* A client for [6lbr](http://cetic.github.io/6lbr/)
+* A CoAP server
+* An MQTT client
+* A web server which can be used to display sensor readings but also to
+  configure MQTT functionality
+
+The example has been configured to run for both CC26xx-based boards: i) The
+SensorTag 2.0 and ii) The Srf06EB with a CC26xx EM mounted on it.
+
+To build the example for the Srf, simply run `make`. To build for the tag,
+run `make BOARD=sensortag`. Do not forget to `make clean` when switching
+between the two platforms.
+
+You can disable some of those individual components by changing the respective
+defines in `project-conf.h`. For instance, to disable the CoAP functionality,
+set `#define CC26XX_WEB_DEMO_CONF_COAP_SERVER 0`. The web server cannot be
+disabled, all other aforementioned applications can.
+
+Network UART (net-uart)
+-----------------------
+This example only makes sense if you are using the Srf or if you have taken
+the sensortag out of its case and you have it connected over JTAG to the Srf.
+
+The net-uart does two things:
+
+* When you type a string to the UART console, the string will be sent verbatim
+  to a remote UDP port 7777 listener. This can be for example a netcat listener
+  on a linux or OS X PC:
+  `nc -6ulkw 1 7777`
+* The net-uart also listens to UDP port 7777 and when it receives a string over
+  UDP, it will print it verbatim over UART.
+
+The example will initially send packets to a hard-coded IPv6 address. This can
+be changed very easily by entering a different IPv6 address to the console.
+Thus, when the serial input string is an IPv6 address, it will not be sent as
+any other string would, but instead it will configure the example to send to a
+different remote address. This new IPv6 address is not persistent across
+device reboots.
+
+6lbr Client
+-----------
+This will periodically send a UDP packet to your 6lbr, containing network
+information, which will be used by 6lbr to construct a network graph. To see
+this in action, fire up a browser and navigate to the 6lbr web page. The
+default address is http://[bbbb::100]. Once the page loads, click the 'sensors'
+tab, as per the image below.
+
+![6lbr](img/6lbr-web.png)
+
+CoAP Server
+-----------
+For this functionality to work, you will need to install the
+[Copper (Cu)](https://addons.mozilla.org/en-US/firefox/addon/copper-270430/)
+addon to your browser.
+
+From the sensors tab in the 6lbr web page, click the 'coap' link in the line
+corresponding to your CC26xx device. Once the addon fires up, select
+".well-known/core" in the left pane and then hit the 'Get' button at the top.
+
+![CoAP Resources](img/coap-resources.png)
+
+The Device will respond with a list of all available CoAP resources. This list
+will be different between the Srf and the SensorTag. The screenshot below shows
+a (partial) list of resources exported by the SensorTag CoAP server. Select
+a resource on the left pane and hit 'Get' to retrieve its value. Select
+`lt/g` and hit 'Post' to toggle the green LED, `lt/r` for the red one.
+
+You can also use CoAP to enable/disable BLE advertisements! Select
+`dev/ble_advd` and then hit the "Outgoing" button in the payload panel. Type in
+the desired payload, which can be:
+
+* `mode=on|off`
+* `name=<name>`
+* `interval=<secs>`
+
+or a combination of both delimited with an amp. For example, you can set as
+payload `mode=on&name=My CC26xx Device 4&interval=5`. Once you have set the
+payload, hit either the POST or PUT button.
+
+Bear in mind that you must set `name` at least once before enabling BLE
+advertisements. If you fail to do so, the RF will refuse to enter BLE mode and
+the CoAP engine will return 4.03 forbidden. The values of `name` and `interval`
+persist across BLE on/off cycles, so you only have to set them once. The values
+do _not_ persist through device powercycles.
+
+HTTPD
+-----
+Back on the 6lbr page, hit the 'web' link corresponding to your device. This
+will take you to a web page served by the CC26xx. The HTTPD serves two pages:
+
+* index.html: Provides sensor readings and network information
+* config.html: Can be used to configure the MQTT client (more below)
+
+In the navigation bar at the top there is also a third link, which will take
+you directly to your device's page on IBM's quickstart service.
+
+IBM Quickstart / MQTT Client
+----------------------------
+The MQTT client can be used to:
+
+* Publish sensor readings to an MQTT broker.
+* Subscribe to a topic and as a result receive commands from an MQTT broker
+
+The device will try to connect to IBM's quickstart over NAT64, so you will
+need a NAT64 gateway in your network to make this work. A guide on how to
+setup NAT64 is out of scope here. If this is not an option for you, you can
+configure the device to publish to a local MQTT broker over end-to-end IPv6.
+See below on how to change the destination broker's address.
+
+By default the device will publish readings to IBM's quickstart service. The
+publish messages include sensor readings but also some other information such
+as device uptime in seconds and a message sequence number. Click the "IBM
+Quickstart" link in the web page to go directly to your device's page
+on Quickstart. After a few seconds, you will see something like this:
+
+![A SensorTag on IBM Quickstart](img/quickstart-sensortag.png)
+
+Sensor readings are only published if they have changed since the previous
+reading (BatMon is an exception and always gets published). Additionally, you
+can turn on/off individual readings from the config.html web page, as per the
+figure below.
+
+![Sensor Readings Configuration](img/sensor-readings-config.png)
+
+Some of the MQTT client functionality can be configured even further:
+
+* You can change the broker IP and port. This is useful if you want to use your
+  own MQTT broker instead of IBM's quickstart. The example has been tested
+  successfully with [mosquitto](http://mosquitto.org/)
+* You can change the publish interval. Recommended values are 10secs or higher.
+  You will not be allowed to set this to anything less than 5 seconds.
+* If you want to use IBM's cloud service with a registered device, change
+  'Org ID' and provide an 'Auth Token', which acts as a 'password', but bear in
+  mind that it gets transported in clear text, both over the web configuration
+  page as well as inside MQTT messages.
+* The remaining configuration options are related to the content of MQTT
+  messages and in general you won't have to modify them.
+
+For the SensorTag, changes to the MQTT configuration get saved in external
+flash and persist across device restarts. The same does not hold true for
+Srf+EM builds.
+
+You can also subscribe to topics and receive commands, but this will only
+work if you use "Org ID" != 'quickstart'. Thus, if you provide a different
+Org ID (do not forget the auth token!), the device will subscribe to:
+
+`iot-2/cmd/+/fmt/json`
+
+You can then use this to toggle LEDs or to turn the buzzer on and off.
+The buzzer is only available on the SensorTag. To do this, you can for example
+use mosquitto client to publish to `iot-2/cmd/leds/fmt/json`. So, to turn
+the buzzer on, you would do this:
+
+`mosquitto_pub -h <broker IP> -m "1" -t iot-2/cmd/buzz/fmt/json`
+
+Where `broker IP` should be replaced with the IP address of your mosquitto
+broker (the one where you device has subscribed). Replace `-m "1'` with `-m "0"`
+to turn the buzzer back off. Replace `buzz` with `leds` in the topic to change
+the state of the LED.
+
+Bear in mind that, even though the topic suggests that messages are of json
+format, they are in fact not. This was done in order to avoid linking a json
+parser into the firmware.

examples/cc26xx/cc26xx-web-demo/cc26xx-web-demo.c

@@ -0,0 +1,893 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *   Main module for the CC26XX web demo. Activates on-device resources,
+ *   takes sensor readings periodically and caches them for all other modules
+ *   to use.
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "contiki-net.h"
+#include "rest-engine.h"
+#include "board-peripherals.h"
+#include "lib/sensors.h"
+#include "lib/list.h"
+#include "sys/process.h"
+#include "button-sensor.h"
+#include "batmon-sensor.h"
+#include "httpd-simple.h"
+#include "cc26xx-web-demo.h"
+#include "mqtt-client.h"
+#include "coap-server.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+PROCESS_NAME(cetic_6lbr_client_process);
+PROCESS(cc26xx_web_demo_process, "CC26XX Web Demo");
+/*---------------------------------------------------------------------------*/
+/*
+ * Update sensor readings in a staggered fashion every SENSOR_READING_PERIOD
+ * ticks + a random interval between 0 and SENSOR_READING_RANDOM ticks
+ */
+#define SENSOR_READING_PERIOD (CLOCK_SECOND * 20)
+#define SENSOR_READING_RANDOM (CLOCK_SECOND << 4)
+
+struct ctimer batmon_timer;
+
+#if BOARD_SENSORTAG
+struct ctimer bmp_timer, sht_timer, tmp_timer, opt_timer, mpu_timer;
+#endif
+/*---------------------------------------------------------------------------*/
+/* Provide visible feedback via LEDS while searching for a network */
+#define NO_NET_LED_DURATION        (CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC >> 1)
+
+static struct etimer et;
+static struct ctimer ct;
+/*---------------------------------------------------------------------------*/
+process_event_t cc26xx_web_demo_publish_event;
+process_event_t cc26xx_web_demo_config_loaded_event;
+process_event_t cc26xx_web_demo_load_config_defaults;
+/*---------------------------------------------------------------------------*/
+/* Saved settings on flash: store, offset, magic */
+#define CONFIG_FLASH_OFFSET        0
+#define CONFIG_MAGIC      0xCC265001
+
+cc26xx_web_demo_config_t cc26xx_web_demo_config;
+/*---------------------------------------------------------------------------*/
+/* A cache of sensor values. Updated periodically or upon key press */
+LIST(sensor_list);
+/*---------------------------------------------------------------------------*/
+/* The objects representing sensors used in this demo */
+#define DEMO_SENSOR(name, type, descr, xml_element, form_field, units) \
+  cc26xx_web_demo_sensor_reading_t name##_reading = \
+  { NULL, 0, 0, descr, xml_element, form_field, units, type, 1, 1 }
+
+/* CC26xx sensors */
+DEMO_SENSOR(batmon_temp, CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP,
+            "Battery Temp", "battery-temp", "batmon_temp",
+            CC26XX_WEB_DEMO_UNIT_TEMP);
+DEMO_SENSOR(batmon_volt, CC26XX_WEB_DEMO_SENSOR_BATMON_VOLT,
+            "Battery Volt", "battery-volt", "batmon_volt",
+            CC26XX_WEB_DEMO_UNIT_VOLT);
+
+/* Sensortag sensors */
+#if BOARD_SENSORTAG
+DEMO_SENSOR(bmp_pres, CC26XX_WEB_DEMO_SENSOR_BMP_PRES,
+            "Air Pressure", "air-pressure", "bmp_pres",
+            CC26XX_WEB_DEMO_UNIT_PRES);
+DEMO_SENSOR(bmp_temp, CC26XX_WEB_DEMO_SENSOR_BMP_TEMP,
+            "Air Temp", "air-temp", "bmp_temp",
+            CC26XX_WEB_DEMO_UNIT_TEMP);
+DEMO_SENSOR(sht_temp, CC26XX_WEB_DEMO_SENSOR_SHT_TEMP,
+            "SHT Temp", "sht-temp", "sht_temp",
+            CC26XX_WEB_DEMO_UNIT_TEMP);
+DEMO_SENSOR(sht_hum, CC26XX_WEB_DEMO_SENSOR_SHT_HUMIDITY,
+            "SHT Humidity", "sht-humidity", "sht_hum",
+            CC26XX_WEB_DEMO_UNIT_HUMIDITY);
+DEMO_SENSOR(tmp_amb, CC26XX_WEB_DEMO_SENSOR_TMP_AMBIENT,
+            "Ambient Temp", "ambient-temp", "tmp_amb",
+            CC26XX_WEB_DEMO_UNIT_TEMP);
+DEMO_SENSOR(tmp_obj, CC26XX_WEB_DEMO_SENSOR_TMP_OBJECT,
+            "Object Temp", "object-temp", "tmp_obj",
+            CC26XX_WEB_DEMO_UNIT_TEMP);
+DEMO_SENSOR(opt, CC26XX_WEB_DEMO_SENSOR_OPT_LIGHT,
+            "Light", "light", "light",
+            CC26XX_WEB_DEMO_UNIT_LIGHT);
+
+/* MPU Readings */
+DEMO_SENSOR(mpu_acc_x, CC26XX_WEB_DEMO_SENSOR_MPU_ACC_X,
+            "Acc X", "acc-x", "acc_x",
+            CC26XX_WEB_DEMO_UNIT_ACC);
+DEMO_SENSOR(mpu_acc_y, CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Y,
+            "Acc Y", "acc-y", "acc_y",
+            CC26XX_WEB_DEMO_UNIT_ACC);
+DEMO_SENSOR(mpu_acc_z, CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Z,
+            "Acc Z", "acc-z", "acc_z",
+            CC26XX_WEB_DEMO_UNIT_ACC);
+
+DEMO_SENSOR(mpu_gyro_x, CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_X,
+            "Gyro X", "gyro-x", "gyro_x",
+            CC26XX_WEB_DEMO_UNIT_GYRO);
+DEMO_SENSOR(mpu_gyro_y, CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Y,
+            "Gyro Y", "gyro-y", "gyro_y",
+            CC26XX_WEB_DEMO_UNIT_GYRO);
+DEMO_SENSOR(mpu_gyro_z, CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Z,
+            "Gyro Z", "gyro-z", "gyro_Z",
+            CC26XX_WEB_DEMO_UNIT_GYRO);
+#endif
+/*---------------------------------------------------------------------------*/
+#if BOARD_SENSORTAG
+static void init_bmp_reading(void *data);
+static void init_light_reading(void *data);
+static void init_sht_reading(void *data);
+static void init_tmp_reading(void *data);
+static void init_mpu_reading(void *data);
+#endif
+/*---------------------------------------------------------------------------*/
+static void
+publish_led_off(void *d)
+{
+  leds_off(CC26XX_WEB_DEMO_STATUS_LED);
+}
+/*---------------------------------------------------------------------------*/
+static void
+save_config()
+{
+  /* Dump current running config to flash */
+#if BOARD_SENSORTAG
+  int rv;
+  cc26xx_web_demo_sensor_reading_t *reading = NULL;
+
+  rv = ext_flash_open();
+
+  if(!rv) {
+    printf("Could not open flash to save config\n");
+    ext_flash_close();
+    return;
+  }
+
+  rv = ext_flash_erase(CONFIG_FLASH_OFFSET, sizeof(cc26xx_web_demo_config_t));
+
+  if(!rv) {
+    printf("Error erasing flash\n");
+  } else {
+    cc26xx_web_demo_config.magic = CONFIG_MAGIC;
+    cc26xx_web_demo_config.len = sizeof(cc26xx_web_demo_config_t);
+    cc26xx_web_demo_config.sensors_bitmap = 0;
+
+    for(reading = list_head(sensor_list);
+        reading != NULL;
+        reading = list_item_next(reading)) {
+      if(reading->publish) {
+        cc26xx_web_demo_config.sensors_bitmap |= (1 << reading->type);
+      }
+    }
+
+    rv = ext_flash_write(CONFIG_FLASH_OFFSET, sizeof(cc26xx_web_demo_config_t),
+                         (uint8_t *)&cc26xx_web_demo_config);
+    if(!rv) {
+      printf("Error saving config\n");
+    }
+  }
+
+  ext_flash_close();
+#endif
+}
+/*---------------------------------------------------------------------------*/
+static void
+load_config()
+{
+#if BOARD_SENSORTAG
+  /* Read from flash into a temp buffer */
+  cc26xx_web_demo_config_t tmp_cfg;
+  cc26xx_web_demo_sensor_reading_t *reading = NULL;
+
+  int rv = ext_flash_open();
+
+  if(!rv) {
+    printf("Could not open flash to load config\n");
+    ext_flash_close();
+    return;
+  }
+
+  rv = ext_flash_read(CONFIG_FLASH_OFFSET, sizeof(tmp_cfg),
+                      (uint8_t *)&tmp_cfg);
+
+  ext_flash_close();
+
+  if(!rv) {
+    printf("Error loading config\n");
+    return;
+  }
+
+  if(tmp_cfg.magic == CONFIG_MAGIC && tmp_cfg.len == sizeof(tmp_cfg)) {
+    memcpy(&cc26xx_web_demo_config, &tmp_cfg, sizeof(cc26xx_web_demo_config));
+  }
+
+  for(reading = list_head(sensor_list);
+      reading != NULL;
+      reading = list_item_next(reading)) {
+    if(cc26xx_web_demo_config.sensors_bitmap & (1 << reading->type)) {
+      reading->publish = 1;
+    } else {
+      reading->publish = 0;
+      snprintf(reading->converted, CC26XX_WEB_DEMO_CONVERTED_LEN, "\"N/A\"");
+    }
+  }
+#endif
+}
+/*---------------------------------------------------------------------------*/
+/* Don't start everything here, we need to dictate order of initialisation */
+AUTOSTART_PROCESSES(&cc26xx_web_demo_process);
+/*---------------------------------------------------------------------------*/
+int
+cc26xx_web_demo_ipaddr_sprintf(char *buf, uint8_t buf_len,
+                               const uip_ipaddr_t *addr)
+{
+  uint16_t a;
+  uint8_t len = 0;
+  int i, f;
+  for(i = 0, f = 0; i < sizeof(uip_ipaddr_t); i += 2) {
+    a = (addr->u8[i] << 8) + addr->u8[i + 1];
+    if(a == 0 && f >= 0) {
+      if(f++ == 0) {
+        len += snprintf(&buf[len], buf_len - len, "::");
+      }
+    } else {
+      if(f > 0) {
+        f = -1;
+      } else if(i > 0) {
+        len += snprintf(&buf[len], buf_len - len, ":");
+      }
+      len += snprintf(&buf[len], buf_len - len, "%x", a);
+    }
+  }
+
+  return len;
+}
+/*---------------------------------------------------------------------------*/
+const cc26xx_web_demo_sensor_reading_t *
+cc26xx_web_demo_sensor_lookup(int sens_type)
+{
+  cc26xx_web_demo_sensor_reading_t *reading = NULL;
+
+  for(reading = list_head(sensor_list);
+      reading != NULL;
+      reading = list_item_next(reading)) {
+    if(reading->type == sens_type) {
+      return reading;
+    }
+  }
+
+  return NULL;
+}
+/*---------------------------------------------------------------------------*/
+const cc26xx_web_demo_sensor_reading_t *
+cc26xx_web_demo_sensor_first()
+{
+  return list_head(sensor_list);
+}
+/*---------------------------------------------------------------------------*/
+void
+cc26xx_web_demo_restore_defaults(void)
+{
+  cc26xx_web_demo_sensor_reading_t *reading = NULL;
+
+  leds_on(LEDS_ALL);
+
+  for(reading = list_head(sensor_list);
+      reading != NULL;
+      reading = list_item_next(reading)) {
+    reading->publish = 1;
+  }
+
+#if CC26XX_WEB_DEMO_MQTT_CLIENT
+  process_post_synch(&mqtt_client_process,
+                     cc26xx_web_demo_load_config_defaults, NULL);
+#endif
+
+#if CC26XX_WEB_DEMO_NET_UART
+  process_post_synch(&net_uart_process, cc26xx_web_demo_load_config_defaults,
+                     NULL);
+#endif
+
+  save_config();
+
+  leds_off(LEDS_ALL);
+}
+/*---------------------------------------------------------------------------*/
+static int
+defaults_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  if(key_len != strlen("defaults") ||
+     strncasecmp(key, "defaults", strlen("defaults")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  cc26xx_web_demo_restore_defaults();
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+static int
+sensor_readings_handler(char *key, int key_len, char *val, int val_len)
+{
+  cc26xx_web_demo_sensor_reading_t *reading = NULL;
+  int rv;
+
+  for(reading = list_head(sensor_list);
+      reading != NULL;
+      reading = list_item_next(reading)) {
+    if(key_len == strlen(reading->form_field) &&
+       strncmp(reading->form_field, key, strlen(key)) == 0) {
+
+      rv = atoi(val);
+
+      /* Be pedantic: only accept 0 and 1, not just any non-zero value */
+      if(rv == 0) {
+        reading->publish = 0;
+        snprintf(reading->converted, CC26XX_WEB_DEMO_CONVERTED_LEN, "\"N/A\"");
+      } else if(rv == 1) {
+        reading->publish = 1;
+      } else {
+        return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+      }
+
+      return HTTPD_SIMPLE_POST_HANDLER_OK;
+    }
+  }
+
+  return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+}
+/*---------------------------------------------------------------------------*/
+HTTPD_SIMPLE_POST_HANDLER(sensor, sensor_readings_handler);
+HTTPD_SIMPLE_POST_HANDLER(defaults, defaults_post_handler);
+/*---------------------------------------------------------------------------*/
+static void
+get_batmon_reading(void *data)
+{
+  int value;
+  char *buf;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  if(batmon_temp_reading.publish) {
+    value = batmon_sensor.value(BATMON_SENSOR_TYPE_TEMP);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      batmon_temp_reading.raw = value;
+
+      buf = batmon_temp_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value >> 2,
+               (value & 0x00000003) * 25);
+    }
+  }
+
+  if(batmon_volt_reading.publish) {
+    value = batmon_sensor.value(BATMON_SENSOR_TYPE_VOLT);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      batmon_volt_reading.raw = value;
+
+      buf = batmon_volt_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d", (value * 125) >> 5);
+    }
+  }
+
+  ctimer_set(&batmon_timer, next, get_batmon_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+#if BOARD_SENSORTAG
+/*---------------------------------------------------------------------------*/
+static void
+compare_and_update(cc26xx_web_demo_sensor_reading_t *reading)
+{
+  if(reading->last == reading->raw) {
+    reading->changed = 0;
+  } else {
+    reading->last = reading->raw;
+    reading->changed = 1;
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+print_mpu_reading(int reading, char *buf)
+{
+  char *loc_buf = buf;
+
+  if(reading < 0) {
+    sprintf(loc_buf, "-");
+    reading = -reading;
+    loc_buf++;
+  }
+
+  sprintf(loc_buf, "%d.%02d", reading / 100, reading % 100);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_bmp_reading()
+{
+  int value;
+  char *buf;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  if(bmp_pres_reading.publish) {
+    value = bmp_280_sensor.value(BMP_280_SENSOR_TYPE_PRESS);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      bmp_pres_reading.raw = value;
+
+      compare_and_update(&bmp_pres_reading);
+
+      buf = bmp_pres_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value / 100,
+               value % 100);
+    }
+  }
+
+  if(bmp_temp_reading.publish) {
+    value = bmp_280_sensor.value(BMP_280_SENSOR_TYPE_TEMP);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      bmp_temp_reading.raw = value;
+
+      compare_and_update(&bmp_temp_reading);
+
+      buf = bmp_temp_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value / 100,
+               value % 100);
+    }
+  }
+
+  SENSORS_DEACTIVATE(bmp_280_sensor);
+
+  ctimer_set(&bmp_timer, next, init_bmp_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_tmp_reading()
+{
+  int value;
+  char *buf;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  if(tmp_amb_reading.publish || tmp_obj_reading.publish) {
+    if(tmp_007_sensor.value(TMP_007_SENSOR_TYPE_ALL) ==
+       CC26XX_SENSOR_READING_ERROR) {
+
+      SENSORS_DEACTIVATE(tmp_007_sensor);
+      ctimer_set(&tmp_timer, next, init_tmp_reading, NULL);
+    }
+  }
+
+  if(tmp_amb_reading.publish) {
+    value = tmp_007_sensor.value(TMP_007_SENSOR_TYPE_AMBIENT);
+    tmp_amb_reading.raw = value;
+
+    compare_and_update(&tmp_amb_reading);
+
+    buf = tmp_amb_reading.converted;
+    memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%03d", value / 1000,
+             value % 1000);
+  }
+
+  if(tmp_obj_reading.publish) {
+    value = tmp_007_sensor.value(TMP_007_SENSOR_TYPE_OBJECT);
+    tmp_obj_reading.raw = value;
+
+    compare_and_update(&tmp_obj_reading);
+
+    buf = tmp_obj_reading.converted;
+    memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%03d", value / 1000,
+             value % 1000);
+  }
+
+  SENSORS_DEACTIVATE(tmp_007_sensor);
+
+  ctimer_set(&tmp_timer, next, init_tmp_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_sht_reading()
+{
+  int value;
+  char *buf;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  if(sht_temp_reading.publish) {
+    value = sht_21_sensor.value(SHT_21_SENSOR_TYPE_TEMP);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      sht_temp_reading.raw = value;
+
+      compare_and_update(&sht_temp_reading);
+
+      buf = sht_temp_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value / 100,
+               value % 100);
+    }
+  }
+
+  if(sht_hum_reading.publish) {
+    value = sht_21_sensor.value(SHT_21_SENSOR_TYPE_HUMIDITY);
+    if(value != CC26XX_SENSOR_READING_ERROR) {
+      sht_hum_reading.raw = value;
+
+      compare_and_update(&sht_hum_reading);
+
+      buf = sht_hum_reading.converted;
+      memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+      snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value / 100,
+               value % 100);
+    }
+  }
+
+  ctimer_set(&sht_timer, next, init_sht_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_light_reading()
+{
+  int value;
+  char *buf;
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+
+  value = opt_3001_sensor.value(0);
+
+  SENSORS_DEACTIVATE(opt_3001_sensor);
+
+  if(value != CC26XX_SENSOR_READING_ERROR) {
+    opt_reading.raw = value;
+
+    compare_and_update(&opt_reading);
+
+    buf = opt_reading.converted;
+    memset(buf, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    snprintf(buf, CC26XX_WEB_DEMO_CONVERTED_LEN, "%d.%02d", value / 100,
+             value % 100);
+  }
+
+  ctimer_set(&opt_timer, next, init_light_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+get_mpu_reading()
+{
+  clock_time_t next = SENSOR_READING_PERIOD +
+    (random_rand() % SENSOR_READING_RANDOM);
+  int raw;
+
+  if(mpu_gyro_x_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_X);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_gyro_x_reading.raw = raw;
+    }
+  }
+
+  if(mpu_gyro_y_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_Y);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_gyro_y_reading.raw = raw;
+    }
+  }
+
+  if(mpu_gyro_z_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_GYRO_Z);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_gyro_z_reading.raw = raw;
+    }
+  }
+
+  if(mpu_acc_x_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_X);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_acc_x_reading.raw = raw;
+    }
+  }
+
+  if(mpu_acc_y_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_Y);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_acc_y_reading.raw = raw;
+    }
+  }
+
+  if(mpu_acc_z_reading.publish) {
+    raw = mpu_9250_sensor.value(MPU_9250_SENSOR_TYPE_ACC_Z);
+    if(raw != CC26XX_SENSOR_READING_ERROR) {
+      mpu_acc_z_reading.raw = raw;
+    }
+  }
+
+  SENSORS_DEACTIVATE(mpu_9250_sensor);
+
+  if(mpu_gyro_x_reading.publish) {
+    compare_and_update(&mpu_gyro_x_reading);
+    memset(mpu_gyro_x_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_gyro_x_reading.raw, mpu_gyro_x_reading.converted);
+  }
+
+  if(mpu_gyro_y_reading.publish) {
+    compare_and_update(&mpu_gyro_y_reading);
+    memset(mpu_gyro_y_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_gyro_y_reading.raw, mpu_gyro_y_reading.converted);
+  }
+
+  if(mpu_gyro_z_reading.publish) {
+    compare_and_update(&mpu_gyro_z_reading);
+    memset(mpu_gyro_z_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_gyro_z_reading.raw, mpu_gyro_z_reading.converted);
+  }
+
+  if(mpu_acc_x_reading.publish) {
+    compare_and_update(&mpu_acc_x_reading);
+    memset(mpu_acc_x_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_acc_x_reading.raw, mpu_acc_x_reading.converted);
+  }
+
+  if(mpu_acc_y_reading.publish) {
+    compare_and_update(&mpu_acc_y_reading);
+    memset(mpu_acc_y_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_acc_y_reading.raw, mpu_acc_y_reading.converted);
+  }
+
+  if(mpu_acc_z_reading.publish) {
+    compare_and_update(&mpu_acc_z_reading);
+    memset(mpu_acc_z_reading.converted, 0, CC26XX_WEB_DEMO_CONVERTED_LEN);
+    print_mpu_reading(mpu_acc_z_reading.raw, mpu_acc_z_reading.converted);
+  }
+
+  /* We only use the single timer */
+  ctimer_set(&mpu_timer, next, init_mpu_reading, NULL);
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_tmp_reading(void *data)
+{
+  if(tmp_amb_reading.publish || tmp_obj_reading.publish) {
+    SENSORS_ACTIVATE(tmp_007_sensor);
+  } else {
+    ctimer_set(&tmp_timer, CLOCK_SECOND, init_tmp_reading, NULL);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_bmp_reading(void *data)
+{
+  if(bmp_pres_reading.publish || bmp_temp_reading.publish) {
+    SENSORS_ACTIVATE(bmp_280_sensor);
+  } else {
+    ctimer_set(&bmp_timer, CLOCK_SECOND, init_bmp_reading, NULL);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_sht_reading(void *data)
+{
+  if(sht_hum_reading.publish || sht_temp_reading.publish) {
+    SENSORS_ACTIVATE(sht_21_sensor);
+  } else {
+    ctimer_set(&sht_timer, CLOCK_SECOND, init_sht_reading, NULL);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_light_reading(void *data)
+{
+  if(opt_reading.publish) {
+    SENSORS_ACTIVATE(opt_3001_sensor);
+  } else {
+    ctimer_set(&opt_timer, CLOCK_SECOND, init_light_reading, NULL);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_mpu_reading(void *data)
+{
+  int readings_bitmap = 0;
+
+  if(mpu_acc_x_reading.publish || mpu_acc_y_reading.publish ||
+     mpu_acc_z_reading.publish) {
+    readings_bitmap |= MPU_9250_SENSOR_TYPE_ACC;
+  }
+
+  if(mpu_gyro_x_reading.publish || mpu_gyro_y_reading.publish ||
+     mpu_gyro_z_reading.publish) {
+    readings_bitmap |= MPU_9250_SENSOR_TYPE_GYRO;
+  }
+
+  if(readings_bitmap) {
+    mpu_9250_sensor.configure(SENSORS_ACTIVE, readings_bitmap);
+  } else {
+    ctimer_set(&mpu_timer, CLOCK_SECOND, init_mpu_reading, NULL);
+  }
+}
+#endif
+/*---------------------------------------------------------------------------*/
+static void
+init_sensor_readings(void)
+{
+  /*
+   * Make a first pass and get all initial sensor readings. This will also
+   * trigger periodic value updates
+   */
+  get_batmon_reading(NULL);
+
+#if BOARD_SENSORTAG
+  init_bmp_reading(NULL);
+  init_light_reading(NULL);
+  init_sht_reading(NULL);
+  init_tmp_reading(NULL);
+  init_mpu_reading(NULL);
+#endif /* BOARD_SENSORTAG */
+
+  return;
+}
+/*---------------------------------------------------------------------------*/
+static void
+init_sensors(void)
+{
+
+  list_add(sensor_list, &batmon_temp_reading);
+  list_add(sensor_list, &batmon_volt_reading);
+  SENSORS_ACTIVATE(batmon_sensor);
+
+#if BOARD_SENSORTAG
+  list_add(sensor_list, &bmp_pres_reading);
+  list_add(sensor_list, &bmp_temp_reading);
+
+  list_add(sensor_list, &tmp_obj_reading);
+  list_add(sensor_list, &tmp_amb_reading);
+
+  list_add(sensor_list, &opt_reading);
+
+  list_add(sensor_list, &sht_hum_reading);
+  list_add(sensor_list, &sht_temp_reading);
+
+  list_add(sensor_list, &mpu_acc_x_reading);
+  list_add(sensor_list, &mpu_acc_y_reading);
+  list_add(sensor_list, &mpu_acc_z_reading);
+  list_add(sensor_list, &mpu_gyro_x_reading);
+  list_add(sensor_list, &mpu_gyro_y_reading);
+  list_add(sensor_list, &mpu_gyro_z_reading);
+
+  SENSORS_ACTIVATE(reed_relay_sensor);
+#endif
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(cc26xx_web_demo_process, ev, data)
+{
+  PROCESS_BEGIN();
+
+  printf("CC26XX Web Demo Process\n");
+
+  init_sensors();
+
+  cc26xx_web_demo_publish_event = process_alloc_event();
+  cc26xx_web_demo_config_loaded_event = process_alloc_event();
+  cc26xx_web_demo_load_config_defaults = process_alloc_event();
+
+  /* Start all other (enabled) processes first */
+  process_start(&httpd_simple_process, NULL);
+#if CC26XX_WEB_DEMO_COAP_SERVER
+  process_start(&coap_server_process, NULL);
+#endif
+
+#if CC26XX_WEB_DEMO_6LBR_CLIENT
+  process_start(&cetic_6lbr_client_process, NULL);
+#endif
+
+#if CC26XX_WEB_DEMO_MQTT_CLIENT
+  process_start(&mqtt_client_process, NULL);
+#endif
+
+#if CC26XX_WEB_DEMO_NET_UART
+  process_start(&net_uart_process, NULL);
+#endif
+
+  /*
+   * Now that processes have set their own config default values, set our
+   * own defaults and restore saved config from flash...
+   */
+  cc26xx_web_demo_config.sensors_bitmap = 0xFFFFFFFF; /* all on by default */
+  load_config();
+
+  /*
+   * Notify all other processes (basically the ones in this demo) that the
+   * configuration has been loaded from flash, in case they care
+   */
+  process_post(PROCESS_BROADCAST, cc26xx_web_demo_config_loaded_event, NULL);
+
+  init_sensor_readings();
+
+  httpd_simple_register_post_handler(&sensor_handler);
+  httpd_simple_register_post_handler(&defaults_handler);
+
+  etimer_set(&et, CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC);
+
+  /*
+   * Update all sensor readings on a configurable sensors_event
+   * (e.g a button press / or reed trigger)
+   */
+  while(1) {
+    if(ev == sensors_event && data == CC26XX_WEB_DEMO_SENSOR_READING_TRIGGER) {
+      if((CC26XX_WEB_DEMO_SENSOR_READING_TRIGGER)->value(
+          BUTTON_SENSOR_VALUE_DURATION) > CLOCK_SECOND * 5) {
+        printf("Restoring defaults!\n");
+        cc26xx_web_demo_restore_defaults();
+      } else {
+        init_sensor_readings();
+
+        process_post(PROCESS_BROADCAST, cc26xx_web_demo_publish_event, NULL);
+      }
+    } else if(ev == PROCESS_EVENT_TIMER && etimer_expired(&et)) {
+      if(uip_ds6_get_global(ADDR_PREFERRED) == NULL) {
+        leds_on(CC26XX_WEB_DEMO_STATUS_LED);
+        ctimer_set(&ct, NO_NET_LED_DURATION, publish_led_off, NULL);
+        etimer_set(&et, CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC);
+      }
+    } else if(ev == httpd_simple_event_new_config) {
+      save_config();
+#if BOARD_SENSORTAG
+    } else if(ev == sensors_event && data == &bmp_280_sensor) {
+      get_bmp_reading();
+    } else if(ev == sensors_event && data == &opt_3001_sensor) {
+      get_light_reading();
+    } else if(ev == sensors_event && data == &sht_21_sensor) {
+      get_sht_reading();
+    } else if(ev == sensors_event && data == &tmp_007_sensor) {
+      get_tmp_reading();
+    } else if(ev == sensors_event && data == &mpu_9250_sensor) {
+      get_mpu_reading();
+#endif
+    }
+
+    PROCESS_YIELD();
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/cc26xx-web-demo.h

@@ -0,0 +1,210 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-examples
+ * @{
+ *
+ * \defgroup cc26xx-web-demo CC26xx Web Demo
+ * @{
+ *
+ *   An example demonstrating:
+ *   * how to use a CC26XX-powered node in a deployment driven by a 6LBR
+ *   * how to expose on-device sensors as CoAP resources
+ *   * how to build a small web page which reports networking and sensory data
+ *   * how to configure functionality through the aforementioned web page using
+ *     HTTP POST requests
+ *   * a network-based UART
+ *
+ * \file
+ *   Main header file for the CC26XX web demo.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef CC26XX_WEB_DEMO_H_
+#define CC26XX_WEB_DEMO_H_
+/*---------------------------------------------------------------------------*/
+#include "dev/leds.h"
+#include "sys/process.h"
+#include "mqtt-client.h"
+#include "net-uart.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#ifdef CC26XX_WEB_DEMO_CONF_MQTT_CLIENT
+#define CC26XX_WEB_DEMO_MQTT_CLIENT CC26XX_WEB_DEMO_CONF_MQTT_CLIENT
+#else
+#define CC26XX_WEB_DEMO_MQTT_CLIENT 1
+#endif
+
+#ifdef CC26XX_WEB_DEMO_CONF_6LBR_CLIENT
+#define CC26XX_WEB_DEMO_6LBR_CLIENT CC26XX_WEB_DEMO_CONF_6LBR_CLIENT
+#else
+#define CC26XX_WEB_DEMO_6LBR_CLIENT 1
+#endif
+
+#ifdef CC26XX_WEB_DEMO_CONF_COAP_SERVER
+#define CC26XX_WEB_DEMO_COAP_SERVER CC26XX_WEB_DEMO_CONF_COAP_SERVER
+#else
+#define CC26XX_WEB_DEMO_COAP_SERVER 1
+#endif
+
+#ifdef CC26XX_WEB_DEMO_CONF_NET_UART
+#define CC26XX_WEB_DEMO_NET_UART CC26XX_WEB_DEMO_CONF_NET_UART
+#else
+#define CC26XX_WEB_DEMO_NET_UART 1
+#endif
+/*---------------------------------------------------------------------------*/
+/* User configuration */
+/* Take a sensor reading on button press */
+#define CC26XX_WEB_DEMO_SENSOR_READING_TRIGGER &button_left_sensor
+
+/* Payload length of ICMPv6 echo requests used to measure RSSI with def rt */
+#define CC26XX_WEB_DEMO_ECHO_REQ_PAYLOAD_LEN   20
+
+#if BOARD_SENSORTAG
+/* Force an MQTT publish on sensor event */
+#define CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER &reed_relay_sensor
+#else
+#define CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER &button_right_sensor
+#endif
+
+#define CC26XX_WEB_DEMO_STATUS_LED LEDS_GREEN
+/*---------------------------------------------------------------------------*/
+/* A timeout used when waiting to connect to a network */
+#define CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC        (CLOCK_SECOND >> 3)
+/*---------------------------------------------------------------------------*/
+/* Default configuration values */
+#define CC26XX_WEB_DEMO_DEFAULT_ORG_ID              "quickstart"
+#define CC26XX_WEB_DEMO_DEFAULT_TYPE_ID             "cc26xx"
+#define CC26XX_WEB_DEMO_DEFAULT_EVENT_TYPE_ID       "status"
+#define CC26XX_WEB_DEMO_DEFAULT_SUBSCRIBE_CMD_TYPE  "+"
+#define CC26XX_WEB_DEMO_DEFAULT_BROKER_PORT         1883
+#define CC26XX_WEB_DEMO_DEFAULT_PUBLISH_INTERVAL    (30 * CLOCK_SECOND)
+#define CC26XX_WEB_DEMO_DEFAULT_KEEP_ALIVE_TIMER    60
+#define CC26XX_WEB_DEMO_DEFAULT_RSSI_MEAS_INTERVAL  (CLOCK_SECOND * 30)
+/*---------------------------------------------------------------------------*/
+/*
+ * You normally won't have to change anything from here onwards unless you are
+ * extending the example
+ */
+/*---------------------------------------------------------------------------*/
+/* Sensor types */
+#define CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP   0
+#define CC26XX_WEB_DEMO_SENSOR_BATMON_VOLT   1
+#define CC26XX_WEB_DEMO_SENSOR_BMP_PRES      2
+#define CC26XX_WEB_DEMO_SENSOR_BMP_TEMP      3
+#define CC26XX_WEB_DEMO_SENSOR_TMP_AMBIENT   4
+#define CC26XX_WEB_DEMO_SENSOR_TMP_OBJECT    5
+#define CC26XX_WEB_DEMO_SENSOR_SHT_TEMP      6
+#define CC26XX_WEB_DEMO_SENSOR_SHT_HUMIDITY  7
+#define CC26XX_WEB_DEMO_SENSOR_OPT_LIGHT     8
+#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_X     9
+#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Y     10
+#define CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Z     11
+#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_X    12
+#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Y    13
+#define CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Z    14
+/*---------------------------------------------------------------------------*/
+extern process_event_t cc26xx_web_demo_publish_event;
+extern process_event_t cc26xx_web_demo_config_loaded_event;
+extern process_event_t cc26xx_web_demo_load_config_defaults;
+/*---------------------------------------------------------------------------*/
+#define CC26XX_WEB_DEMO_UNIT_TEMP     "C"
+#define CC26XX_WEB_DEMO_UNIT_VOLT     "mV"
+#define CC26XX_WEB_DEMO_UNIT_PRES     "hPa"
+#define CC26XX_WEB_DEMO_UNIT_HUMIDITY "%RH"
+#define CC26XX_WEB_DEMO_UNIT_LIGHT    "lux"
+#define CC26XX_WEB_DEMO_UNIT_ACC      "G"
+#define CC26XX_WEB_DEMO_UNIT_GYRO     "deg per sec"
+/*---------------------------------------------------------------------------*/
+/* A data type for sensor readings, internally stored in a linked list */
+#define CC26XX_WEB_DEMO_CONVERTED_LEN        12
+
+typedef struct cc26xx_web_demo_sensor_reading {
+  struct cc26xx_web_demo_sensor_reading *next;
+  int raw;
+  int last;
+  const char *descr;
+  const char *xml_element;
+  const char *form_field;
+  char *units;
+  uint8_t type;
+  uint8_t publish;
+  uint8_t changed;
+  char converted[CC26XX_WEB_DEMO_CONVERTED_LEN];
+} cc26xx_web_demo_sensor_reading_t;
+/*---------------------------------------------------------------------------*/
+/* Global configuration */
+typedef struct cc26xx_web_demo_config_s {
+  uint32_t magic;
+  int len;
+  uint32_t sensors_bitmap;
+  mqtt_client_config_t mqtt_config;
+  net_uart_config_t net_uart;
+} cc26xx_web_demo_config_t;
+
+extern cc26xx_web_demo_config_t cc26xx_web_demo_config;
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Performs a lookup for a reading of a specific type of sensor
+ * \param sens_type CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP...
+ * \return A pointer to the reading data structure or NULL
+ */
+const cc26xx_web_demo_sensor_reading_t *cc26xx_web_demo_sensor_lookup(int sens_type);
+
+/**
+ * \brief Returns the first available sensor reading
+ * \return A pointer to the reading data structure or NULL
+ */
+const cc26xx_web_demo_sensor_reading_t *cc26xx_web_demo_sensor_first(void);
+
+/**
+ * \brief Print an IPv6 address into a buffer
+ * \param buf A pointer to the buffer where this function will print the IPv6
+ *        address
+ * \param buf_len the length of the buffer
+ * \param addr A pointer to the IPv6 address
+ * \return The number of bytes written to the buffer
+ *
+ * It is the caller's responsibility to allocate enough space for buf
+ */
+int cc26xx_web_demo_ipaddr_sprintf(char *buf, uint8_t buf_len,
+                                   const uip_ipaddr_t *addr);
+
+/**
+ * \brief Resets the example to a default configuration
+ */
+void cc26xx_web_demo_restore_defaults(void);
+/*---------------------------------------------------------------------------*/
+#endif /* CC26XX_WEB_DEMO_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/cetic-6lbr-client.c

@@ -0,0 +1,197 @@
+/*
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *     An implementation of a 6LBR UDP client. Is used to populate the 6LBR
+ *     web server's 'sensors' tab
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "contiki-lib.h"
+#include "contiki-net.h"
+#include "net/rpl/rpl.h"
+#include "net/ip/uip.h"
+
+#include <string.h>
+#include <stdio.h>
+/*---------------------------------------------------------------------------*/
+#define DEBUG 0
+#include "net/ip/uip-debug.h"
+/*---------------------------------------------------------------------------*/
+#ifndef CETIC_6LBR_NODE_INFO_PORT
+#define CETIC_6LBR_NODE_INFO_PORT 3000
+#endif
+
+#define MAX_PAYLOAD_LEN    40
+#define MSG_INTERVAL       (60 * CLOCK_SECOND)
+/*---------------------------------------------------------------------------*/
+static struct uip_udp_conn *client_conn = NULL;
+static struct etimer et;
+static uip_ip6addr_t dest_addr;
+/*---------------------------------------------------------------------------*/
+PROCESS(cetic_6lbr_client_process, "6LBR Client Process");
+/*---------------------------------------------------------------------------*/
+static void
+tcpip_handler(void)
+{
+  char *str;
+
+  if(uip_newdata()) {
+    str = uip_appdata;
+    str[uip_datalen()] = '\0';
+    PRINTF("Response from the server: '%s'\n", str);
+  }
+}
+/*---------------------------------------------------------------------------*/
+static char *
+add_ipaddr(char *buf, const uip_ipaddr_t *addr)
+{
+  uint16_t a;
+  unsigned int i;
+  int f;
+  char *p = buf;
+
+  for(i = 0, f = 0; i < sizeof(uip_ipaddr_t); i += 2) {
+    a = (addr->u8[i] << 8) + addr->u8[i + 1];
+    if(a == 0 && f >= 0) {
+      if(f++ == 0) {
+        p += sprintf(p, "::");
+      }
+    } else {
+      if(f > 0) {
+        f = -1;
+      } else if(i > 0) {
+        p += sprintf(p, ":");
+      }
+      p += sprintf(p, "%04x", a);
+    }
+  }
+  return p;
+}
+/*---------------------------------------------------------------------------*/
+static void
+timeout_handler(void)
+{
+  static int seq_id;
+  char buf[MAX_PAYLOAD_LEN];
+  int i;
+  uip_ip6addr_t *globaladdr = NULL;
+  uint16_t dest_port = CETIC_6LBR_NODE_INFO_PORT;
+  int has_dest = 0;
+  rpl_dag_t *dag;
+
+  uip_ds6_addr_t *addr_desc = uip_ds6_get_global(ADDR_PREFERRED);
+  if(addr_desc != NULL) {
+    globaladdr = &addr_desc->ipaddr;
+    dag = rpl_get_any_dag();
+    if(dag) {
+      uip_ipaddr_copy(&dest_addr, globaladdr);
+      memcpy(&dest_addr.u8[8], &dag->dag_id.u8[8], sizeof(uip_ipaddr_t) / 2);
+      has_dest = 1;
+    }
+  }
+
+  if(has_dest) {
+    if(client_conn == NULL) {
+      PRINTF("UDP-CLIENT: address destination: ");
+      PRINT6ADDR(&dest_addr);
+      PRINTF("\n");
+      client_conn = udp_new(&dest_addr, UIP_HTONS(dest_port), NULL);
+
+      if(client_conn != NULL) {
+        PRINTF("Created a connection with the server ");
+        PRINT6ADDR(&client_conn->ripaddr);
+        PRINTF(" local/remote port %u/%u\n",
+               UIP_HTONS(client_conn->lport), UIP_HTONS(client_conn->rport));
+      } else {
+        PRINTF("Could not open connection\n");
+      }
+    } else {
+      if(memcmp(&client_conn->ripaddr, &dest_addr, sizeof(uip_ipaddr_t)) != 0) {
+        PRINTF("UDP-CLIENT: new address destination: ");
+        PRINT6ADDR(&dest_addr);
+        PRINTF("\n");
+        uip_udp_remove(client_conn);
+        client_conn = udp_new(&dest_addr, UIP_HTONS(dest_port), NULL);
+        if(client_conn != NULL) {
+          PRINTF("Created a connection with the server ");
+          PRINT6ADDR(&client_conn->ripaddr);
+          PRINTF(" local/remote port %u/%u\n",
+                 UIP_HTONS(client_conn->lport), UIP_HTONS(client_conn->rport));
+        } else {
+          PRINTF("Could not open connection\n");
+        }
+      }
+    }
+    if(client_conn != NULL) {
+      PRINTF("Client sending to: ");
+      PRINT6ADDR(&client_conn->ripaddr);
+      i = sprintf(buf, "%d | ", ++seq_id);
+      dag = rpl_get_any_dag();
+      if(dag && dag->instance->def_route) {
+        add_ipaddr(buf + i, &dag->instance->def_route->ipaddr);
+      } else {
+        sprintf(buf + i, "(null)");
+      }
+      PRINTF(" (msg: %s)\n", buf);
+      uip_udp_packet_send(client_conn, buf, strlen(buf));
+    } else {
+      PRINTF("No connection created\n");
+    }
+  } else {
+    PRINTF("No address configured\n");
+  }
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(cetic_6lbr_client_process, ev, data)
+{
+
+  PROCESS_BEGIN();
+
+  printf("6LBR Client Process\n");
+
+  memset(&dest_addr, 0, sizeof(uip_ipaddr_t));
+
+  etimer_set(&et, MSG_INTERVAL);
+  while(1) {
+    PROCESS_YIELD();
+    if(etimer_expired(&et)) {
+      timeout_handler();
+      etimer_set(&et, MSG_INTERVAL);
+    } else if(ev == tcpip_event) {
+      tcpip_handler();
+    }
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/coap-server.c

@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *     A CC26XX-specific CoAP server
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "contiki-net.h"
+#include "rest-engine.h"
+#include "board-peripherals.h"
+#include "dev/cc26xx-rf.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+/* Common resources */
+extern resource_t res_leds;
+
+extern resource_t res_batmon_temp;
+extern resource_t res_batmon_volt;
+
+extern resource_t res_device_sw;
+extern resource_t res_device_hw;
+extern resource_t res_device_uptime;
+extern resource_t res_device_cfg_reset;
+
+#if CC26XX_RF_BLE_SUPPORT
+extern resource_t res_ble_advd;
+#endif
+
+/* Board-specific resources */
+#if BOARD_SENSORTAG
+extern resource_t res_bmp280_temp;
+extern resource_t res_bmp280_press;
+extern resource_t res_tmp007_amb;
+extern resource_t res_tmp007_obj;
+extern resource_t res_sht21_temp;
+extern resource_t res_sht21_hum;
+extern resource_t res_opt3001_light;
+extern resource_t res_mpu_acc_x;
+extern resource_t res_mpu_acc_y;
+extern resource_t res_mpu_acc_z;
+extern resource_t res_mpu_gyro_x;
+extern resource_t res_mpu_gyro_y;
+extern resource_t res_mpu_gyro_z;
+extern resource_t res_toggle_red;
+extern resource_t res_toggle_green;
+#else
+extern resource_t res_toggle_red;
+extern resource_t res_toggle_green;
+extern resource_t res_toggle_orange;
+extern resource_t res_toggle_yellow;
+#endif
+/*---------------------------------------------------------------------------*/
+const char *coap_server_not_found_msg = "Resource not found";
+const char *coap_server_supported_msg = "Supported:"
+                                        "text/plain,"
+                                        "application/json,"
+                                        "application/xml";
+/*---------------------------------------------------------------------------*/
+static void
+start_board_resources(void)
+{
+#if BOARD_SENSORTAG
+  rest_activate_resource(&res_bmp280_temp, "sen/bar/temp");
+  rest_activate_resource(&res_bmp280_press, "sen/bar/pres");
+  rest_activate_resource(&res_tmp007_amb, "sen/tmp/amb");
+  rest_activate_resource(&res_tmp007_obj, "sen/tmp/obj");
+  rest_activate_resource(&res_sht21_temp, "sen/sht/t");
+  rest_activate_resource(&res_sht21_hum, "sen/sht/h");
+  rest_activate_resource(&res_opt3001_light, "sen/opt/light");
+  rest_activate_resource(&res_mpu_acc_x, "sen/mpu/acc/x");
+  rest_activate_resource(&res_mpu_acc_y, "sen/mpu/acc/y");
+  rest_activate_resource(&res_mpu_acc_z, "sen/mpu/acc/z");
+  rest_activate_resource(&res_mpu_gyro_x, "sen/mpu/gyro/x");
+  rest_activate_resource(&res_mpu_gyro_y, "sen/mpu/gyro/y");
+  rest_activate_resource(&res_mpu_gyro_z, "sen/mpu/gyro/z");
+  rest_activate_resource(&res_leds, "lt");
+  rest_activate_resource(&res_toggle_green, "lt/g");
+  rest_activate_resource(&res_toggle_red, "lt/r");
+#elif BOARD_SMARTRF06EB
+  rest_activate_resource(&res_leds, "lt");
+  rest_activate_resource(&res_toggle_red, "lt/r");
+  rest_activate_resource(&res_toggle_yellow, "lt/y");
+  rest_activate_resource(&res_toggle_green, "lt/g");
+  rest_activate_resource(&res_toggle_orange, "lt/o");
+#endif
+}
+/*---------------------------------------------------------------------------*/
+PROCESS(coap_server_process, "CC26XX CoAP Server");
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(coap_server_process, ev, data)
+{
+  PROCESS_BEGIN();
+
+  printf("CC26XX CoAP Server\n");
+
+  /* Initialize the REST engine. */
+  rest_init_engine();
+
+  rest_activate_resource(&res_batmon_temp, "sen/batmon/temp");
+  rest_activate_resource(&res_batmon_volt, "sen/batmon/voltage");
+
+  rest_activate_resource(&res_device_hw, "dev/mdl/hw");
+  rest_activate_resource(&res_device_sw, "dev/mdl/sw");
+  rest_activate_resource(&res_device_uptime, "dev/uptime");
+  rest_activate_resource(&res_device_cfg_reset, "dev/cfg_reset");
+
+#if CC26XX_RF_BLE_SUPPORT
+  rest_activate_resource(&res_ble_advd, "dev/ble_advd");
+#endif
+
+  start_board_resources();
+
+  /* Define application-specific events here. */
+  while(1) {
+    PROCESS_WAIT_EVENT();
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/coap-server.h

@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *     Header file for the CC26xx web demo CoAP functionality
+ */
+/*---------------------------------------------------------------------------*/
+#include "sys/process.h"
+/*---------------------------------------------------------------------------*/
+#ifndef COAP_SERVER_H_
+#define COAP_SERVER_H_
+/*---------------------------------------------------------------------------*/
+extern const char *coap_server_not_found_msg;
+extern const char *coap_server_supported_msg;
+/*---------------------------------------------------------------------------*/
+PROCESS_NAME(coap_server_process);
+/*---------------------------------------------------------------------------*/
+#endif /* COAP_SERVER_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/httpd-simple.h

@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2010, Swedish Institute of Computer Science.
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \file
+ *         Header file for the HTTPD of the cc26xx web demo example.
+ * \author
+ *         Adam Dunkels <adam@sics.se>
+ *         Niclas Finne <nfi@sics.se>
+ *         Joakim Eriksson <joakime@sics.se>
+ *         Texas Instruments Incorporated - http://www.ti.com/
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef HTTPD_SIMPLE_H_
+#define HTTPD_SIMPLE_H_
+/*---------------------------------------------------------------------------*/
+#include "contiki-net.h"
+#include "sys/process.h"
+#include "cc26xx-web-demo.h"
+/*---------------------------------------------------------------------------*/
+/* Ideally a multiple of TCP_MSS */
+#ifdef HTTPD_SIMPLE_CONF_MAIN_BUF_SIZE
+#define HTTPD_SIMPLE_MAIN_BUF_SIZE HTTPD_SIMPLE_CONF_BUF_SIZE
+#else
+#define HTTPD_SIMPLE_MAIN_BUF_SIZE UIP_TCP_MSS
+#endif
+/*---------------------------------------------------------------------------*/
+#define HTTPD_PATHLEN  16
+#define HTTPD_INBUF_LEN (HTTPD_PATHLEN + 10)
+
+#define TMP_BUF_SIZE   (UIP_TCP_MSS + 1)
+/*---------------------------------------------------------------------------*/
+/* POST request handlers */
+#define HTTPD_SIMPLE_POST_HANDLER_OK      1
+#define HTTPD_SIMPLE_POST_HANDLER_UNKNOWN 0
+#define HTTPD_SIMPLE_POST_HANDLER_ERROR   0xFFFFFFFF
+
+/**
+ * \brief Datatype for a handler which can process incoming POST requests
+ * \param key The configuration key to be updated
+ * \param key_len The length of the key argument
+ * \param val The new configuration value for key
+ * \param val_len The length of the value argument
+ *
+ * \return 1: HTTPD_SIMPLE_POST_HANDLER_OK if the function can handle the
+ * request, HTTPD_SIMPLE_POST_HANDLER_UNKNOWN if it does not know how to handle
+ * it. HTTPD_SIMPLE_POST_HANDLER_ERROR if it does know how to handle it but
+ * the request was malformed.
+ */
+typedef struct httpd_simple_post_handler {
+  struct httpd_simple_post_handler *next;
+  int (*handler)(char *key, int key_len, char *val, int val_len);
+} httpd_simple_post_handler_t;
+
+/* Declare a handler */
+#define HTTPD_SIMPLE_POST_HANDLER(name, fp) \
+  httpd_simple_post_handler_t name##_handler = { NULL, fp }
+
+/**
+ * \brief Register a handler for POST requests
+ * \param h A pointer to the handler structure
+ */
+void httpd_simple_register_post_handler(httpd_simple_post_handler_t *h);
+/*---------------------------------------------------------------------------*/
+/*
+ * An event generated by the HTTPD when a new configuration request has been
+ * received
+ */
+extern process_event_t httpd_simple_event_new_config;
+/*---------------------------------------------------------------------------*/
+PROCESS_NAME(httpd_simple_process);
+/*---------------------------------------------------------------------------*/
+#endif /* HTTPD_SIMPLE_H_ */

examples/cc26xx/cc26xx-web-demo/mqtt-client.c

@@ -0,0 +1,975 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *   MQTT/IBM cloud service client for the CC26XX web demo.
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "rpl/rpl-private.h"
+#include "mqtt.h"
+#include "net/rpl/rpl.h"
+#include "net/ip/uip.h"
+#include "net/ipv6/uip-icmp6.h"
+#include "net/ipv6/sicslowpan.h"
+#include "sys/etimer.h"
+#include "sys/ctimer.h"
+#include "lib/sensors.h"
+#include "button-sensor.h"
+#include "board-peripherals.h"
+#include "cc26xx-web-demo.h"
+#include "dev/leds.h"
+#include "mqtt-client.h"
+#include "httpd-simple.h"
+
+#include <string.h>
+#include <strings.h>
+/*---------------------------------------------------------------------------*/
+/*
+ * IBM server: messaging.quickstart.internetofthings.ibmcloud.com
+ * (184.172.124.189) mapped in an NAT64 (prefix 64:ff9b::/96) IPv6 address
+ * Note: If not able to connect; lookup the IP address again as it may change.
+ *
+ * If the node has a broker IP setting saved on flash, this value here will
+ * get ignored
+ */
+static const char *broker_ip = "0064:ff9b:0000:0000:0000:0000:b8ac:7cbd";
+/*---------------------------------------------------------------------------*/
+/*
+ * A timeout used when waiting for something to happen (e.g. to connect or to
+ * disconnect)
+ */
+#define STATE_MACHINE_PERIODIC     (CLOCK_SECOND >> 1)
+/*---------------------------------------------------------------------------*/
+/* Provide visible feedback via LEDS during various states */
+/* When connecting to broker */
+#define CONNECTING_LED_DURATION    (CLOCK_SECOND >> 3)
+
+/* Each time we try to publish */
+#define PUBLISH_LED_ON_DURATION    (CLOCK_SECOND)
+/*---------------------------------------------------------------------------*/
+/* Connections and reconnections */
+#define RETRY_FOREVER              0xFF
+#define RECONNECT_INTERVAL         (CLOCK_SECOND * 2)
+
+/*
+ * Number of times to try reconnecting to the broker.
+ * Can be a limited number (e.g. 3, 10 etc) or can be set to RETRY_FOREVER
+ */
+#define RECONNECT_ATTEMPTS         RETRY_FOREVER
+#define CONNECTION_STABLE_TIME     (CLOCK_SECOND * 5)
+#define NEW_CONFIG_WAIT_INTERVAL   (CLOCK_SECOND * 20)
+static struct timer connection_life;
+static uint8_t connect_attempt;
+/*---------------------------------------------------------------------------*/
+/* Various states */
+static uint8_t state;
+#define MQTT_CLIENT_STATE_INIT            0
+#define MQTT_CLIENT_STATE_REGISTERED      1
+#define MQTT_CLIENT_STATE_CONNECTING      2
+#define MQTT_CLIENT_STATE_CONNECTED       3
+#define MQTT_CLIENT_STATE_PUBLISHING      4
+#define MQTT_CLIENT_STATE_DISCONNECTED    5
+#define MQTT_CLIENT_STATE_NEWCONFIG       6
+#define MQTT_CLIENT_STATE_CONFIG_ERROR 0xFE
+#define MQTT_CLIENT_STATE_ERROR        0xFF
+/*---------------------------------------------------------------------------*/
+/* Maximum TCP segment size for outgoing segments of our socket */
+#define MQTT_CLIENT_MAX_SEGMENT_SIZE    32
+/*---------------------------------------------------------------------------*/
+/*
+ * Buffers for Client ID and Topic.
+ * Make sure they are large enough to hold the entire respective string
+ *
+ * d:quickstart:status:EUI64 is 32 bytes long
+ * iot-2/evt/status/fmt/json is 25 bytes
+ * We also need space for the null termination
+ */
+#define BUFFER_SIZE 64
+static char client_id[BUFFER_SIZE];
+static char pub_topic[BUFFER_SIZE];
+static char sub_topic[BUFFER_SIZE];
+/*---------------------------------------------------------------------------*/
+/*
+ * The main MQTT buffers.
+ * We will need to increase if we start publishing more data.
+ */
+#define APP_BUFFER_SIZE 512
+static struct mqtt_connection conn;
+static char app_buffer[APP_BUFFER_SIZE];
+/*---------------------------------------------------------------------------*/
+#define QUICKSTART "quickstart"
+/*---------------------------------------------------------------------------*/
+static struct mqtt_message *msg_ptr = 0;
+static struct etimer publish_periodic_timer;
+static struct ctimer ct;
+static char *buf_ptr;
+static uint16_t seq_nr_value = 0;
+/*---------------------------------------------------------------------------*/
+static uip_ip6addr_t def_route;
+/*---------------------------------------------------------------------------*/
+/* Parent RSSI functionality */
+static struct uip_icmp6_echo_reply_notification echo_reply_notification;
+static struct etimer echo_request_timer;
+int def_rt_rssi = 0;
+/*---------------------------------------------------------------------------*/
+const static cc26xx_web_demo_sensor_reading_t *reading;
+/*---------------------------------------------------------------------------*/
+mqtt_client_config_t *conf;
+/*---------------------------------------------------------------------------*/
+PROCESS(mqtt_client_process, "CC26XX MQTT Client");
+/*---------------------------------------------------------------------------*/
+static void
+publish_led_off(void *d)
+{
+  leds_off(CC26XX_WEB_DEMO_STATUS_LED);
+}
+/*---------------------------------------------------------------------------*/
+static void
+new_net_config(void)
+{
+  /*
+   * We got a new configuration over the net.
+   *
+   * Disconnect from the current broker and stop the periodic timer.
+   *
+   * When the source of the new configuration is done, we will get notified
+   * via an event.
+   */
+  if(state == MQTT_CLIENT_STATE_NEWCONFIG) {
+    return;
+  }
+
+  state = MQTT_CLIENT_STATE_NEWCONFIG;
+
+  etimer_stop(&publish_periodic_timer);
+  mqtt_disconnect(&conn);
+}
+/*---------------------------------------------------------------------------*/
+static int
+org_id_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  if(key_len != strlen("org_id") ||
+     strncasecmp(key, "org_id", strlen("org_id")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_ORG_ID_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->org_id, 0, MQTT_CLIENT_CONFIG_ORG_ID_LEN);
+    memcpy(conf->org_id, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+type_id_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  if(key_len != strlen("type_id") ||
+     strncasecmp(key, "type_id", strlen("type_id")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_TYPE_ID_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->type_id, 0, MQTT_CLIENT_CONFIG_TYPE_ID_LEN);
+    memcpy(conf->type_id, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+event_type_id_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  if(key_len != strlen("event_type_id") ||
+     strncasecmp(key, "event_type_id", strlen("event_type_id")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_EVENT_TYPE_ID_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->event_type_id, 0, MQTT_CLIENT_CONFIG_EVENT_TYPE_ID_LEN);
+    memcpy(conf->event_type_id, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+cmd_type_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  if(key_len != strlen("cmd_type") ||
+     strncasecmp(key, "cmd_type", strlen("cmd_type")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_CMD_TYPE_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->cmd_type, 0, MQTT_CLIENT_CONFIG_CMD_TYPE_LEN);
+    memcpy(conf->cmd_type, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+auth_token_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  if(key_len != strlen("auth_token") ||
+     strncasecmp(key, "auth_token", strlen("auth_token")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_AUTH_TOKEN_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->auth_token, 0, MQTT_CLIENT_CONFIG_AUTH_TOKEN_LEN);
+    memcpy(conf->auth_token, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+interval_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = 0;
+
+  if(key_len != strlen("interval") ||
+     strncasecmp(key, "interval", strlen("interval")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  rv = atoi(val);
+
+  if(rv < MQTT_CLIENT_PUBLISH_INTERVAL_MIN ||
+     rv > MQTT_CLIENT_PUBLISH_INTERVAL_MAX) {
+    return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  }
+
+  conf->pub_interval = rv * CLOCK_SECOND;
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+static int
+port_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = 0;
+
+  if(key_len != strlen("broker_port") ||
+     strncasecmp(key, "broker_port", strlen("broker_port")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  rv = atoi(val);
+
+  if(rv <= 65535 && rv > 0) {
+    conf->broker_port = rv;
+  } else {
+    return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  }
+
+  new_net_config();
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+static int
+ip_addr_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+
+  if(key_len != strlen("broker_ip") ||
+     strncasecmp(key, "broker_ip", strlen("broker_ip")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > MQTT_CLIENT_CONFIG_IP_ADDR_STR_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    memset(conf->broker_ip, 0, MQTT_CLIENT_CONFIG_IP_ADDR_STR_LEN);
+    memcpy(conf->broker_ip, val, val_len);
+
+    rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+  }
+
+  new_net_config();
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+reconnect_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  if(key_len != strlen("reconnect") ||
+     strncasecmp(key, "reconnect", strlen("reconnect")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  new_net_config();
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+static int
+ping_interval_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = 0;
+
+  if(key_len != strlen("ping_interval") ||
+     strncasecmp(key, "ping_interval", strlen("ping_interval")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  rv = atoi(val);
+
+  if(rv < MQTT_CLIENT_RSSI_MEASURE_INTERVAL_MIN ||
+     rv > MQTT_CLIENT_RSSI_MEASURE_INTERVAL_MAX) {
+    return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  }
+
+  conf->def_rt_ping_interval = rv * CLOCK_SECOND;
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+HTTPD_SIMPLE_POST_HANDLER(org_id, org_id_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(type_id, type_id_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(event_type_id, event_type_id_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(cmd_type, cmd_type_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(auth_token, auth_token_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(ip_addr, ip_addr_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(port, port_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(interval, interval_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(reconnect, reconnect_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(ping_interval, ping_interval_post_handler);
+/*---------------------------------------------------------------------------*/
+static void
+echo_reply_handler(uip_ipaddr_t *source, uint8_t ttl, uint8_t *data,
+                   uint16_t datalen)
+{
+  if(uip_ip6addr_cmp(source, uip_ds6_defrt_choose())) {
+    def_rt_rssi = sicslowpan_get_last_rssi();
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+pub_handler(const char *topic, uint16_t topic_len, const uint8_t *chunk,
+            uint16_t chunk_len)
+{
+  DBG("Pub Handler: topic='%s' (len=%u), chunk_len=%u\n", topic, topic_len,
+      chunk_len);
+
+  /* If we don't like the length, ignore */
+  if(topic_len != 23 || chunk_len != 1) {
+    printf("Incorrect topic or chunk len. Ignored\n");
+    return;
+  }
+
+  /* If the format != json, ignore */
+  if(strncmp(&topic[topic_len - 4], "json", 4) != 0) {
+    printf("Incorrect format\n");
+  }
+
+  if(strncmp(&topic[10], "leds", 4) == 0) {
+    if(chunk[0] == '1') {
+      leds_on(LEDS_RED);
+    } else if(chunk[0] == '0') {
+      leds_off(LEDS_RED);
+    }
+    return;
+  }
+
+#if BOARD_SENSORTAG
+  if(strncmp(&topic[10], "buzz", 4) == 0) {
+    if(chunk[0] == '1') {
+      buzzer_start(1000);
+    } else if(chunk[0] == '0') {
+      buzzer_stop();
+    }
+    return;
+  }
+#endif
+}
+/*---------------------------------------------------------------------------*/
+static void
+mqtt_event(struct mqtt_connection *m, mqtt_event_t event, void *data)
+{
+  switch(event) {
+  case MQTT_EVENT_CONNECTED: {
+    DBG("APP - Application has a MQTT connection\n");
+    timer_set(&connection_life, CONNECTION_STABLE_TIME);
+    state = MQTT_CLIENT_STATE_CONNECTED;
+    break;
+  }
+  case MQTT_EVENT_DISCONNECTED: {
+    DBG("APP - MQTT Disconnect. Reason %u\n", *((mqtt_event_t *)data));
+
+    /* Do nothing if the disconnect was the result of an incoming config */
+    if(state != MQTT_CLIENT_STATE_NEWCONFIG) {
+      state = MQTT_CLIENT_STATE_DISCONNECTED;
+      process_poll(&mqtt_client_process);
+    }
+    break;
+  }
+  case MQTT_EVENT_PUBLISH: {
+    msg_ptr = data;
+
+    /* Implement first_flag in publish message? */
+    if(msg_ptr->first_chunk) {
+      msg_ptr->first_chunk = 0;
+      DBG("APP - Application received a publish on topic '%s'. Payload "
+          "size is %i bytes. Content:\n\n",
+          msg_ptr->topic, msg_ptr->payload_length);
+    }
+
+    pub_handler(msg_ptr->topic, strlen(msg_ptr->topic), msg_ptr->payload_chunk,
+                msg_ptr->payload_length);
+    break;
+  }
+  case MQTT_EVENT_SUBACK: {
+    DBG("APP - Application is subscribed to topic successfully\n");
+    break;
+  }
+  case MQTT_EVENT_UNSUBACK: {
+    DBG("APP - Application is unsubscribed to topic successfully\n");
+    break;
+  }
+  case MQTT_EVENT_PUBACK: {
+    DBG("APP - Publishing complete.\n");
+    break;
+  }
+  default:
+    DBG("APP - Application got a unhandled MQTT event: %i\n", event);
+    break;
+  }
+}
+/*---------------------------------------------------------------------------*/
+static int
+construct_pub_topic(void)
+{
+  int len = snprintf(pub_topic, BUFFER_SIZE, "iot-2/evt/%s/fmt/json",
+                     conf->event_type_id);
+
+  /* len < 0: Error. Len >= BUFFER_SIZE: Buffer too small */
+  if(len < 0 || len >= BUFFER_SIZE) {
+    printf("Pub Topic: %d, Buffer %d\n", len, BUFFER_SIZE);
+    return 0;
+  }
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+static int
+construct_sub_topic(void)
+{
+  int len = snprintf(sub_topic, BUFFER_SIZE, "iot-2/cmd/%s/fmt/json",
+                     conf->cmd_type);
+
+  /* len < 0: Error. Len >= BUFFER_SIZE: Buffer too small */
+  if(len < 0 || len >= BUFFER_SIZE) {
+    printf("Sub Topic: %d, Buffer %d\n", len, BUFFER_SIZE);
+    return 0;
+  }
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+static int
+construct_client_id(void)
+{
+  int len = snprintf(client_id, BUFFER_SIZE, "d:%s:%s:%02x%02x%02x%02x%02x%02x",
+                     conf->org_id, conf->type_id,
+                     linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1],
+                     linkaddr_node_addr.u8[2], linkaddr_node_addr.u8[5],
+                     linkaddr_node_addr.u8[6], linkaddr_node_addr.u8[7]);
+
+  /* len < 0: Error. Len >= BUFFER_SIZE: Buffer too small */
+  if(len < 0 || len >= BUFFER_SIZE) {
+    printf("Client ID: %d, Buffer %d\n", len, BUFFER_SIZE);
+    return 0;
+  }
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+static void
+update_config(void)
+{
+  if(construct_client_id() == 0) {
+    /* Fatal error. Client ID larger than the buffer */
+    state = MQTT_CLIENT_STATE_CONFIG_ERROR;
+    return;
+  }
+
+  if(construct_sub_topic() == 0) {
+    /* Fatal error. Topic larger than the buffer */
+    state = MQTT_CLIENT_STATE_CONFIG_ERROR;
+    return;
+  }
+
+  if(construct_pub_topic() == 0) {
+    /* Fatal error. Topic larger than the buffer */
+    state = MQTT_CLIENT_STATE_CONFIG_ERROR;
+    return;
+  }
+
+  /* Reset the counter */
+  seq_nr_value = 0;
+
+  state = MQTT_CLIENT_STATE_INIT;
+
+  /*
+   * Schedule next timer event ASAP
+   *
+   * If we entered an error state then we won't do anything when it fires.
+   *
+   * Since the error at this stage is a config error, we will only exit this
+   * error state if we get a new config.
+   */
+  etimer_set(&publish_periodic_timer, 0);
+
+  return;
+}
+/*---------------------------------------------------------------------------*/
+static int
+init_config()
+{
+  /* Populate configuration with default values */
+  memset(conf, 0, sizeof(mqtt_client_config_t));
+
+  memcpy(conf->org_id, CC26XX_WEB_DEMO_DEFAULT_ORG_ID, 11);
+  memcpy(conf->type_id, CC26XX_WEB_DEMO_DEFAULT_TYPE_ID, 7);
+  memcpy(conf->event_type_id, CC26XX_WEB_DEMO_DEFAULT_EVENT_TYPE_ID, 7);
+  memcpy(conf->broker_ip, broker_ip, strlen(broker_ip));
+  memcpy(conf->cmd_type, CC26XX_WEB_DEMO_DEFAULT_SUBSCRIBE_CMD_TYPE, 1);
+
+  conf->broker_port = CC26XX_WEB_DEMO_DEFAULT_BROKER_PORT;
+  conf->pub_interval = CC26XX_WEB_DEMO_DEFAULT_PUBLISH_INTERVAL;
+  conf->def_rt_ping_interval = CC26XX_WEB_DEMO_DEFAULT_RSSI_MEAS_INTERVAL;
+
+  return 1;
+}
+/*---------------------------------------------------------------------------*/
+static void
+register_http_post_handlers(void)
+{
+  httpd_simple_register_post_handler(&org_id_handler);
+  httpd_simple_register_post_handler(&type_id_handler);
+  httpd_simple_register_post_handler(&event_type_id_handler);
+  httpd_simple_register_post_handler(&cmd_type_handler);
+  httpd_simple_register_post_handler(&auth_token_handler);
+  httpd_simple_register_post_handler(&interval_handler);
+  httpd_simple_register_post_handler(&port_handler);
+  httpd_simple_register_post_handler(&ip_addr_handler);
+  httpd_simple_register_post_handler(&reconnect_handler);
+  httpd_simple_register_post_handler(&ping_interval_handler);
+}
+/*---------------------------------------------------------------------------*/
+static void
+subscribe(void)
+{
+  /* Publish MQTT topic in IBM quickstart format */
+  mqtt_status_t status;
+
+  status = mqtt_subscribe(&conn, NULL, sub_topic, MQTT_QOS_LEVEL_0);
+
+  DBG("APP - Subscribing!\n");
+  if(status == MQTT_STATUS_OUT_QUEUE_FULL) {
+    DBG("APP - Tried to subscribe but command queue was full!\n");
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+publish(void)
+{
+  /* Publish MQTT topic in IBM quickstart format */
+  int len;
+  int remaining = APP_BUFFER_SIZE;
+
+  seq_nr_value++;
+
+  buf_ptr = app_buffer;
+
+  len = snprintf(buf_ptr, remaining,
+                 "{"
+                 "\"d\":{"
+                 "\"myName\":\"%s\","
+                 "\"Seq #\":%d,"
+                 "\"Uptime (sec)\":%lu",
+                 BOARD_STRING, seq_nr_value, clock_seconds());
+
+  if(len < 0 || len >= remaining) {
+    printf("Buffer too short. Have %d, need %d + \\0\n", remaining, len);
+    return;
+  }
+
+  remaining -= len;
+  buf_ptr += len;
+
+  /* Put our Default route's string representation in a buffer */
+  char def_rt_str[64];
+  memset(def_rt_str, 0, sizeof(def_rt_str));
+  cc26xx_web_demo_ipaddr_sprintf(def_rt_str, sizeof(def_rt_str),
+                                 uip_ds6_defrt_choose());
+
+  len = snprintf(buf_ptr, remaining, ",\"Def Route\":\"%s\",\"RSSI (dBm)\":%d",
+                 def_rt_str, def_rt_rssi);
+
+  if(len < 0 || len >= remaining) {
+    printf("Buffer too short. Have %d, need %d + \\0\n", remaining, len);
+    return;
+  }
+  remaining -= len;
+  buf_ptr += len;
+
+  memcpy(&def_route, uip_ds6_defrt_choose(), sizeof(uip_ip6addr_t));
+
+  for(reading = cc26xx_web_demo_sensor_first();
+      reading != NULL; reading = reading->next) {
+    if(reading->publish && reading->raw != CC26XX_SENSOR_READING_ERROR) {
+      len = snprintf(buf_ptr, remaining,
+                     ",\"%s (%s)\":%s", reading->descr, reading->units,
+                     reading->converted);
+
+      if(len < 0 || len >= remaining) {
+        printf("Buffer too short. Have %d, need %d + \\0\n", remaining, len);
+        return;
+      }
+      remaining -= len;
+      buf_ptr += len;
+    }
+  }
+
+  len = snprintf(buf_ptr, remaining, "}}");
+
+  if(len < 0 || len >= remaining) {
+    printf("Buffer too short. Have %d, need %d + \\0\n", remaining, len);
+    return;
+  }
+
+  mqtt_publish(&conn, NULL, pub_topic, (uint8_t *)app_buffer,
+               strlen(app_buffer), MQTT_QOS_LEVEL_0, MQTT_RETAIN_OFF);
+
+  DBG("APP - Publish!\n");
+}
+/*---------------------------------------------------------------------------*/
+static void
+connect_to_broker(void)
+{
+  /* Connect to MQTT server */
+  mqtt_connect(&conn, conf->broker_ip, conf->broker_port,
+               conf->pub_interval * 3);
+
+  state = MQTT_CLIENT_STATE_CONNECTING;
+}
+/*---------------------------------------------------------------------------*/
+static void
+ping_parent(void)
+{
+  if(uip_ds6_get_global(ADDR_PREFERRED) == NULL) {
+    return;
+  }
+
+  uip_icmp6_send(uip_ds6_defrt_choose(), ICMP6_ECHO_REQUEST, 0,
+                 CC26XX_WEB_DEMO_ECHO_REQ_PAYLOAD_LEN);
+}
+/*---------------------------------------------------------------------------*/
+static void
+state_machine(void)
+{
+  switch(state) {
+  case MQTT_CLIENT_STATE_INIT:
+    /* If we have just been configured register MQTT connection */
+    mqtt_register(&conn, &mqtt_client_process, client_id, mqtt_event,
+                  MQTT_CLIENT_MAX_SEGMENT_SIZE);
+
+    /*
+     * If we are not using the quickstart service (thus we are an IBM
+     * registered device), we need to provide user name and password
+     */
+    if(strncasecmp(conf->org_id, QUICKSTART, strlen(conf->org_id)) != 0) {
+      if(strlen(conf->auth_token) == 0) {
+        printf("User name set, but empty auth token\n");
+        state = MQTT_CLIENT_STATE_ERROR;
+        break;
+      } else {
+        mqtt_set_username_password(&conn, "use-token-auth",
+                                   conf->auth_token);
+      }
+    }
+
+    /* _register() will set auto_reconnect. We don't want that. */
+    conn.auto_reconnect = 0;
+    connect_attempt = 1;
+
+    /*
+     * Wipe out the default route so we'll republish it every time we switch to
+     * a new broker
+     */
+    memset(&def_route, 0, sizeof(def_route));
+
+    state = MQTT_CLIENT_STATE_REGISTERED;
+    DBG("Init\n");
+    /* Continue */
+  case MQTT_CLIENT_STATE_REGISTERED:
+    if(uip_ds6_get_global(ADDR_PREFERRED) != NULL) {
+      /* Registered and with a public IP. Connect */
+      DBG("Registered. Connect attempt %u\n", connect_attempt);
+      ping_parent();
+      connect_to_broker();
+    }
+    etimer_set(&publish_periodic_timer, CC26XX_WEB_DEMO_NET_CONNECT_PERIODIC);
+    return;
+    break;
+  case MQTT_CLIENT_STATE_CONNECTING:
+    leds_on(CC26XX_WEB_DEMO_STATUS_LED);
+    ctimer_set(&ct, CONNECTING_LED_DURATION, publish_led_off, NULL);
+    /* Not connected yet. Wait */
+    DBG("Connecting (%u)\n", connect_attempt);
+    break;
+  case MQTT_CLIENT_STATE_CONNECTED:
+    /* Don't subscribe unless we are a registered device */
+    if(strncasecmp(conf->org_id, QUICKSTART, strlen(conf->org_id)) == 0) {
+      DBG("Using 'quickstart': Skipping subscribe\n");
+      state = MQTT_CLIENT_STATE_PUBLISHING;
+    }
+    /* Continue */
+  case MQTT_CLIENT_STATE_PUBLISHING:
+    /* If the timer expired, the connection is stable. */
+    if(timer_expired(&connection_life)) {
+      /*
+       * Intentionally using 0 here instead of 1: We want RECONNECT_ATTEMPTS
+       * attempts if we disconnect after a successful connect
+       */
+      connect_attempt = 0;
+    }
+
+    if(mqtt_ready(&conn) && conn.out_buffer_sent) {
+      /* Connected. Publish */
+      if(state == MQTT_CLIENT_STATE_CONNECTED) {
+        subscribe();
+        state = MQTT_CLIENT_STATE_PUBLISHING;
+      } else {
+        leds_on(CC26XX_WEB_DEMO_STATUS_LED);
+        ctimer_set(&ct, PUBLISH_LED_ON_DURATION, publish_led_off, NULL);
+        publish();
+      }
+      etimer_set(&publish_periodic_timer, conf->pub_interval);
+
+      DBG("Publishing\n");
+      /* Return here so we don't end up rescheduling the timer */
+      return;
+    } else {
+      /*
+       * Our publish timer fired, but some MQTT packet is already in flight
+       * (either not sent at all, or sent but not fully ACKd).
+       *
+       * This can mean that we have lost connectivity to our broker or that
+       * simply there is some network delay. In both cases, we refuse to
+       * trigger a new message and we wait for TCP to either ACK the entire
+       * packet after retries, or to timeout and notify us.
+       */
+      DBG("Publishing... (MQTT state=%d, q=%u)\n", conn.state,
+          conn.out_queue_full);
+    }
+    break;
+  case MQTT_CLIENT_STATE_DISCONNECTED:
+    DBG("Disconnected\n");
+    if(connect_attempt < RECONNECT_ATTEMPTS ||
+       RECONNECT_ATTEMPTS == RETRY_FOREVER) {
+      /* Disconnect and backoff */
+      clock_time_t interval;
+      mqtt_disconnect(&conn);
+      connect_attempt++;
+
+      interval = connect_attempt < 3 ? RECONNECT_INTERVAL << connect_attempt :
+        RECONNECT_INTERVAL << 3;
+
+      DBG("Disconnected. Attempt %u in %lu ticks\n", connect_attempt, interval);
+
+      etimer_set(&publish_periodic_timer, interval);
+
+      state = MQTT_CLIENT_STATE_REGISTERED;
+      return;
+    } else {
+      /* Max reconnect attempts reached. Enter error state */
+      state = MQTT_CLIENT_STATE_ERROR;
+      DBG("Aborting connection after %u attempts\n", connect_attempt - 1);
+    }
+    break;
+  case MQTT_CLIENT_STATE_NEWCONFIG:
+    /* Only update config after we have disconnected */
+    if(conn.state == MQTT_CONN_STATE_NOT_CONNECTED) {
+      update_config();
+      DBG("New config\n");
+
+      /* update_config() scheduled next pass. Return */
+      return;
+    }
+    break;
+  case MQTT_CLIENT_STATE_CONFIG_ERROR:
+    /* Idle away. The only way out is a new config */
+    printf("Bad configuration.\n");
+    return;
+  case MQTT_CLIENT_STATE_ERROR:
+  default:
+    leds_on(CC26XX_WEB_DEMO_STATUS_LED);
+    /*
+     * 'default' should never happen.
+     *
+     * If we enter here it's because of some error. Stop timers. The only thing
+     * that can bring us out is a new config event
+     */
+    printf("Default case: State=0x%02x\n", state);
+    return;
+  }
+
+  /* If we didn't return so far, reschedule ourselves */
+  etimer_set(&publish_periodic_timer, STATE_MACHINE_PERIODIC);
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(mqtt_client_process, ev, data)
+{
+
+  PROCESS_BEGIN();
+
+  printf("CC26XX MQTT Client Process\n");
+
+  conf = &cc26xx_web_demo_config.mqtt_config;
+  if(init_config() != 1) {
+    PROCESS_EXIT();
+  }
+
+  register_http_post_handlers();
+
+  update_config();
+
+  def_rt_rssi = 0x8000000;
+  uip_icmp6_echo_reply_callback_add(&echo_reply_notification,
+                                    echo_reply_handler);
+  etimer_set(&echo_request_timer, conf->def_rt_ping_interval);
+
+  /* Main loop */
+  while(1) {
+
+    PROCESS_YIELD();
+
+    if(ev == sensors_event && data == CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER) {
+      if(state == MQTT_CLIENT_STATE_ERROR) {
+        connect_attempt = 1;
+        state = MQTT_CLIENT_STATE_REGISTERED;
+      }
+    }
+
+    if(ev == httpd_simple_event_new_config) {
+      /*
+       * Schedule next pass in a while. When HTTPD sends us this event, it is
+       * also in the process of sending the config page. Wait a little before
+       * reconnecting, so as to not cause congestion.
+       */
+      etimer_set(&publish_periodic_timer, NEW_CONFIG_WAIT_INTERVAL);
+    }
+
+    if((ev == PROCESS_EVENT_TIMER && data == &publish_periodic_timer) ||
+       ev == PROCESS_EVENT_POLL ||
+       ev == cc26xx_web_demo_publish_event ||
+       (ev == sensors_event && data == CC26XX_WEB_DEMO_MQTT_PUBLISH_TRIGGER)) {
+      state_machine();
+    }
+
+    if(ev == PROCESS_EVENT_TIMER && data == &echo_request_timer) {
+      ping_parent();
+      etimer_set(&echo_request_timer, conf->def_rt_ping_interval);
+    }
+
+    if(ev == cc26xx_web_demo_load_config_defaults) {
+      init_config();
+      etimer_set(&publish_periodic_timer, NEW_CONFIG_WAIT_INTERVAL);
+    }
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/mqtt-client.h

@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *     Header file for the CC26xx web demo MQTT client functionality
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef MQTT_CLIENT_H_
+#define MQTT_CLIENT_H_
+/*---------------------------------------------------------------------------*/
+#define MQTT_CLIENT_CONFIG_ORG_ID_LEN        32
+#define MQTT_CLIENT_CONFIG_TYPE_ID_LEN       32
+#define MQTT_CLIENT_CONFIG_AUTH_TOKEN_LEN    32
+#define MQTT_CLIENT_CONFIG_EVENT_TYPE_ID_LEN 32
+#define MQTT_CLIENT_CONFIG_CMD_TYPE_LEN       8
+#define MQTT_CLIENT_CONFIG_IP_ADDR_STR_LEN   64
+/*---------------------------------------------------------------------------*/
+#define MQTT_CLIENT_RSSI_MEASURE_INTERVAL_MAX 86400 /* secs: 1 day */
+#define MQTT_CLIENT_RSSI_MEASURE_INTERVAL_MIN     5 /* secs */
+#define MQTT_CLIENT_PUBLISH_INTERVAL_MAX      86400 /* secs: 1 day */
+#define MQTT_CLIENT_PUBLISH_INTERVAL_MIN          5 /* secs */
+/*---------------------------------------------------------------------------*/
+PROCESS_NAME(mqtt_client_process);
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Data structure declaration for the MQTT client configuration
+ */
+typedef struct mqtt_client_config {
+  char org_id[MQTT_CLIENT_CONFIG_ORG_ID_LEN];
+  char type_id[MQTT_CLIENT_CONFIG_TYPE_ID_LEN];
+  char auth_token[MQTT_CLIENT_CONFIG_AUTH_TOKEN_LEN];
+  char event_type_id[MQTT_CLIENT_CONFIG_EVENT_TYPE_ID_LEN];
+  char broker_ip[MQTT_CLIENT_CONFIG_IP_ADDR_STR_LEN];
+  char cmd_type[MQTT_CLIENT_CONFIG_CMD_TYPE_LEN];
+  clock_time_t pub_interval;
+  int def_rt_ping_interval;
+  uint16_t broker_port;
+} mqtt_client_config_t;
+/*---------------------------------------------------------------------------*/
+#endif /* MQTT_CLIENT_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/net-uart.c

@@ -0,0 +1,344 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *     A process which receives data over UART and transmits them over UDP
+ *     to a pre-defined IPv6 address and port. It also listens on the same UDP
+ *     port for messages, which it prints out over UART.
+ *
+ *     For this example to work, you will have to modify the destination IPv6
+ *     address by adjusting the set_dest_addr() macro below.
+ *
+ *     To listen on your linux or OS X box:
+ *     nc -6ulkw 1 REMOTE_PORT
+ *
+ *     (REMOTE_PORT should be the actual value of the define below, e.g. 7777)
+ *
+ *     Once netcat is up and listening, type something to the CC26xx's terminal
+ *     Bear in mind that the datagram will only be sent after a 0x0a (LF) char
+ *     has been received. Therefore, if you are on Win, do NOT use PuTTY for
+ *     this purpose, since it does not send 0x0a as part of the line end. On
+ *     Win XP use hyperterm. On Win 7 use some other software (e.g. Tera Term,
+ *     which can be configured to send CRLF on enter keystrokes).
+ *
+ *     To send data in the other direction from your linux or OS X box:
+ *
+ *        nc -6u \<node IPv6 address\> REMOTE_PORT
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "sys/process.h"
+#include "dev/serial-line.h"
+#include "net/ip/uip.h"
+#include "net/ip/uip-udp-packet.h"
+#include "net/ip/uiplib.h"
+#include "lpm.h"
+#include "net-uart.h"
+#include "httpd-simple.h"
+
+#include "ti-lib.h"
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+/*---------------------------------------------------------------------------*/
+#define DEBUG DEBUG_NONE
+#include "net/ip/uip-debug.h"
+/*---------------------------------------------------------------------------*/
+#define REMOTE_PORT  7777
+#define MAX_MSG_SIZE  100
+
+#define set_dest_addr() uip_ip6addr(&remote_addr, \
+                                    0xBBBB, 0x0000, 0x0000, 0x0000, \
+                                    0x3E07, 0x54FF, 0xFE74, 0x4885);
+/*---------------------------------------------------------------------------*/
+#define ADDRESS_CONVERSION_OK       1
+#define ADDRESS_CONVERSION_ERROR    0
+/*---------------------------------------------------------------------------*/
+#ifndef MIN
+#define MIN(n, m)   (((n) < (m)) ? (n) : (m))
+#endif
+/*---------------------------------------------------------------------------*/
+static struct uip_udp_conn *udp_conn = NULL;
+
+static uint8_t buffer[MAX_MSG_SIZE];
+static uint8_t msg_len;
+static uip_ip6addr_t remote_addr;
+/*---------------------------------------------------------------------------*/
+#define IPV6_ADDR_STR_LEN       64
+/*---------------------------------------------------------------------------*/
+PROCESS(net_uart_process, "Net UART Process");
+/*---------------------------------------------------------------------------*/
+/*
+ * \brief Attempts to convert a string representation of an IPv6 address to a
+ * numeric one.
+ * \param buf The buffer with the string to be converted.
+ * \return ADDRESS_CONVERSION_OK or ADDRESS_CONVERSION_ERROR
+ *
+ * ToDo: Add support for NAT64 conversion in case the incoming address is a v4
+ * This is now supported in the current master, so when we pull it in this will
+ * be very straightforward.
+ */
+static int
+set_new_ip_address(char *buf)
+{
+  /*
+   * uiplib_ip6addrconv will immediately start writing into the supplied buffer
+   * even if it subsequently fails. Thus, pass an intermediate buffer
+   */
+  uip_ip6addr_t tmp_addr;
+
+  int rv = uiplib_ip6addrconv(buf, &tmp_addr);
+
+  if(rv == ADDRESS_CONVERSION_OK) {
+    /* Conversion OK, copy to our main buffer */
+    memcpy(&remote_addr, &tmp_addr, sizeof(remote_addr));
+
+    PRINTF("Updated remote address ");
+    PRINT6ADDR(&remote_addr);
+    PRINTF("\n");
+  }
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static void
+net_input(void)
+{
+  if(uip_newdata()) {
+    memset(buffer, 0, MAX_MSG_SIZE);
+    msg_len = MIN(uip_datalen(), MAX_MSG_SIZE - 1);
+
+    /* Copy data */
+    memcpy(buffer, uip_appdata, msg_len);
+    printf("%s", (char *)buffer);
+  }
+
+  return;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ * In order to maintain UART input operation:
+ * - Keep the uart clocked in sleep and deep sleep
+ * - Keep the serial PD on in deep sleep
+ */
+static lpm_power_domain_lock_t lock;
+/*---------------------------------------------------------------------------*/
+static void
+release_uart(void)
+{
+  /* Release serial PD lock */
+  lpm_pd_lock_release(&lock);
+
+  /* Let the UART turn off during Sleep and Deep Sleep */
+  ti_lib_prcm_peripheral_sleep_disable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_peripheral_deep_sleep_disable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+}
+/*---------------------------------------------------------------------------*/
+static void
+keep_uart_on(void)
+{
+  /* Keep the serial PD on */
+  lpm_pd_lock_obtain(&lock, PRCM_DOMAIN_SERIAL);
+
+  /* Keep the UART clock on during Sleep and Deep Sleep */
+  ti_lib_prcm_peripheral_sleep_enable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_peripheral_deep_sleep_enable(PRCM_PERIPH_UART0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+}
+/*---------------------------------------------------------------------------*/
+static int
+remote_port_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv;
+
+  if(key_len != strlen("net_uart_port") ||
+     strncasecmp(key, "net_uart_port", strlen("net_uart_port")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  rv = atoi(val);
+
+  if(rv <= 65535 && rv > 0) {
+    cc26xx_web_demo_config.net_uart.remote_port = (uint16_t)rv;
+  } else {
+    return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  }
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+static int
+remote_ipv6_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv = HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+
+  if(key_len != strlen("net_uart_ip") ||
+     strncasecmp(key, "net_uart_ip", strlen("net_uart_ip")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  if(val_len > IPV6_ADDR_STR_LEN) {
+    /* Ours but bad value */
+    rv = HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  } else {
+    if(set_new_ip_address(val)) {
+      memset(cc26xx_web_demo_config.net_uart.remote_address, 0,
+             NET_UART_IP_ADDR_STRLEN);
+      memcpy(cc26xx_web_demo_config.net_uart.remote_address, val, val_len);
+      rv = HTTPD_SIMPLE_POST_HANDLER_OK;
+    }
+  }
+
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+static int
+on_off_post_handler(char *key, int key_len, char *val, int val_len)
+{
+  int rv;
+
+  if(key_len != strlen("net_uart_on") ||
+     strncasecmp(key, "net_uart_on", strlen("net_uart_on")) != 0) {
+    /* Not ours */
+    return HTTPD_SIMPLE_POST_HANDLER_UNKNOWN;
+  }
+
+  rv = atoi(val);
+
+  /* Be pedantic: only accept 0 and 1, not just any non-zero value */
+  if(rv == 0) {
+    cc26xx_web_demo_config.net_uart.enable = 0;
+    release_uart();
+  } else if(rv == 1) {
+    cc26xx_web_demo_config.net_uart.enable = 1;
+    keep_uart_on();
+  } else {
+    return HTTPD_SIMPLE_POST_HANDLER_ERROR;
+  }
+
+  return HTTPD_SIMPLE_POST_HANDLER_OK;
+}
+/*---------------------------------------------------------------------------*/
+HTTPD_SIMPLE_POST_HANDLER(remote_port, remote_port_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(remote_ipv6, remote_ipv6_post_handler);
+HTTPD_SIMPLE_POST_HANDLER(on_off, on_off_post_handler);
+/*---------------------------------------------------------------------------*/
+static void
+set_config_defaults(void)
+{
+  /* Set a hard-coded destination address to start with */
+  set_dest_addr();
+
+  /* Set config defaults */
+  cc26xx_web_demo_ipaddr_sprintf(cc26xx_web_demo_config.net_uart.remote_address,
+                                 NET_UART_IP_ADDR_STRLEN, &remote_addr);
+  cc26xx_web_demo_config.net_uart.remote_port = REMOTE_PORT;
+  cc26xx_web_demo_config.net_uart.enable = 1;
+}
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(net_uart_process, ev, data)
+{
+  PROCESS_BEGIN();
+
+  printf("CC26XX Net UART Process\n");
+
+  set_config_defaults();
+
+  udp_conn = udp_new(NULL, UIP_HTONS(0), NULL);
+  udp_bind(udp_conn, UIP_HTONS(REMOTE_PORT));
+
+  if(udp_conn == NULL) {
+    printf("No UDP connection available, exiting the process!\n");
+    PROCESS_EXIT();
+  }
+
+  httpd_simple_register_post_handler(&remote_port_handler);
+  httpd_simple_register_post_handler(&remote_ipv6_handler);
+  httpd_simple_register_post_handler(&on_off_handler);
+
+  while(1) {
+
+    PROCESS_YIELD();
+
+    if(ev == serial_line_event_message) {
+      /*
+       * If the message contains a new IP address, save it and go back to
+       * waiting.
+       */
+      if(set_new_ip_address((char *)data) == ADDRESS_CONVERSION_ERROR) {
+        /* Not an IP address in the message. Send to current destination */
+        memset(buffer, 0, MAX_MSG_SIZE);
+
+        /* We need to add a line feed, thus never fill the entire buffer */
+        msg_len = MIN(strlen(data), MAX_MSG_SIZE - 1);
+        memcpy(buffer, data, msg_len);
+
+        /* Add a line feed */
+        buffer[msg_len] = 0x0A;
+        msg_len++;
+
+        uip_udp_packet_sendto(
+          udp_conn, buffer, msg_len, &remote_addr,
+          UIP_HTONS(cc26xx_web_demo_config.net_uart.remote_port));
+      }
+    } else if(ev == tcpip_event) {
+      net_input();
+    } else if(ev == cc26xx_web_demo_config_loaded_event) {
+      /*
+       * New config. Check if it's possible to update the remote address.
+       * The port will have been updated already
+       */
+      set_new_ip_address(cc26xx_web_demo_config.net_uart.remote_address);
+
+      if(cc26xx_web_demo_config.net_uart.enable == 1) {
+        keep_uart_on();
+      }
+    } else if(ev == cc26xx_web_demo_load_config_defaults) {
+      set_config_defaults();
+    }
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

examples/cc26xx/cc26xx-web-demo/net-uart.h

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef NET_UART_H_
+#define NET_UART_H_
+/*---------------------------------------------------------------------------*/
+#include "net/ip/uip.h"
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#define NET_UART_IP_ADDR_STRLEN   64
+/*---------------------------------------------------------------------------*/
+PROCESS_NAME(net_uart_process);
+/*---------------------------------------------------------------------------*/
+typedef struct net_uart_config_s {
+  char remote_address[NET_UART_IP_ADDR_STRLEN];
+  uint16_t remote_port;
+  uint8_t enable;
+} net_uart_config_t;
+/*---------------------------------------------------------------------------*/
+#endif /* NET_UART_H_ */
+/*---------------------------------------------------------------------------*/

examples/cc26xx/cc26xx-web-demo/project-conf.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef PROJECT_CONF_H_
+#define PROJECT_CONF_H_
+/*---------------------------------------------------------------------------*/
+/* Change to match your configuration */
+#define NETSTACK_CONF_RDC     contikimac_driver
+#define IEEE802154_CONF_PANID            0xABCD
+#define CC26XX_RF_CONF_CHANNEL               25
+#define CC26XX_MODEL_CONF_CPU_VARIANT      2650 /* CC2650 */
+#define CC26XX_RF_CONF_BLE_SUPPORT            1 /* Only available with CC2650 */
+/*---------------------------------------------------------------------------*/
+/* Enable/Disable Components of this Demo */
+#define CC26XX_WEB_DEMO_CONF_MQTT_CLIENT      1
+#define CC26XX_WEB_DEMO_CONF_6LBR_CLIENT      1
+#define CC26XX_WEB_DEMO_CONF_COAP_SERVER      1
+#define CC26XX_WEB_DEMO_CONF_NET_UART         1
+/*---------------------------------------------------------------------------*/
+/* Shrink the size of the uIP buffer, routing table and ND cache */
+#define UIP_CONF_BUFFER_SIZE                900
+#define NBR_TABLE_CONF_MAX_NEIGHBORS          8
+#define UIP_CONF_MAX_ROUTES                   8
+/*---------------------------------------------------------------------------*/
+#endif /* PROJECT_CONF_H_ */
+/*---------------------------------------------------------------------------*/

examples/cc26xx/cc26xx-web-demo/resources/res-ble-advd.c

@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *      CoAP resource to start/stop/configure BLE advertisements
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "rest-engine.h"
+#include "er-coap.h"
+#include "dev/cc26xx-rf.h"
+
+#include <string.h>
+#include <stdlib.h>
+/*---------------------------------------------------------------------------*/
+#define BLE_NAME_BUF_LEN 32
+/*---------------------------------------------------------------------------*/
+const char *forbidden_payload = "Name to advertise unspecified.\n"
+                                "Use name=<name> in the request";
+/*---------------------------------------------------------------------------*/
+static void
+res_ble_post_put_handler(void *request, void *response, uint8_t *buffer,
+                         uint16_t preferred_size, int32_t *offset)
+{
+  size_t len = 0;
+  const char *text = NULL;
+  char name[BLE_NAME_BUF_LEN];
+  int success = 0;
+  int rv;
+
+  memset(name, 0, BLE_NAME_BUF_LEN);
+
+  len = REST.get_post_variable(request, "name", &text);
+
+  if(len > 0 && len < BLE_NAME_BUF_LEN) {
+    memcpy(name, text, len);
+    cc26xx_rf_ble_beacond_config(0, name);
+    success = 1;
+  }
+
+  len = REST.get_post_variable(request, "interval", &text);
+
+  rv = atoi(text);
+
+  if(rv > 0) {
+    cc26xx_rf_ble_beacond_config((clock_time_t)(rv * CLOCK_SECOND), NULL);
+    success = 1;
+  }
+
+  len = REST.get_post_variable(request, "mode", &text);
+
+  if(len) {
+    if(strncmp(text, "on", len) == 0) {
+      if(cc26xx_rf_ble_beacond_start()) {
+        success = 1;
+      } else {
+        REST.set_response_status(response, REST.status.FORBIDDEN);
+        REST.set_response_payload(response, forbidden_payload,
+                                  strlen(forbidden_payload));
+        return;
+      }
+    } else if(strncmp(text, "off", len) == 0) {
+      cc26xx_rf_ble_beacond_stop();
+      success = 1;
+    } else {
+      success = 0;
+    }
+  }
+
+  if(!success) {
+    REST.set_response_status(response, REST.status.BAD_REQUEST);
+  }
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_ble_advd,
+         "title=\"BLE advd config: POST/PUT name=<name>&mode=on|off"
+         "&interval=<secs>\";rt=\"Control\"",
+         NULL,
+         res_ble_post_put_handler,
+         res_ble_post_put_handler,
+         NULL);
+/*---------------------------------------------------------------------------*/
+/** @} */

examples/cc26xx/cc26xx-web-demo/resources/res-device.c

@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *  CoAP resource handler for CC26XX software and hardware version
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "rest-engine.h"
+#include "er-coap.h"
+#include "sys/clock.h"
+#include "cc26xx-model.h"
+#include "coap-server.h"
+#include "cc26xx-web-demo.h"
+
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_hw(void *request, void *response, uint8_t *buffer,
+                   uint16_t preferred_size, int32_t *offset)
+{
+  unsigned int accept = -1;
+
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s on CC%u", BOARD_STRING,
+             CC26XX_MODEL_CPU_VARIANT);
+
+    REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{\"HW Ver\":\"%s on CC%u\"}",
+             BOARD_STRING, CC26XX_MODEL_CPU_VARIANT);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_XML) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_XML);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE,
+             "<hw-ver val=\"%s on CC%u\"/>", BOARD_STRING,
+             CC26XX_MODEL_CPU_VARIANT);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    REST.set_response_payload(response, coap_server_supported_msg,
+                              strlen(coap_server_supported_msg));
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_sw(void *request, void *response, uint8_t *buffer,
+                   uint16_t preferred_size, int32_t *offset)
+{
+  unsigned int accept = -1;
+
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", CONTIKI_VERSION_STRING);
+
+    REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{\"SW Ver\":\"%s\"}",
+             CONTIKI_VERSION_STRING);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_XML) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_XML);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE,
+             "<sw-ver val=\"%s\"/>", CONTIKI_VERSION_STRING);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    REST.set_response_payload(response, coap_server_supported_msg,
+                              strlen(coap_server_supported_msg));
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_uptime(void *request, void *response, uint8_t *buffer,
+                       uint16_t preferred_size, int32_t *offset)
+{
+  unsigned int accept = -1;
+
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%lu", clock_seconds());
+
+    REST.set_response_payload(response, (uint8_t *)buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{\"uptime\":%lu}",
+             clock_seconds());
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_XML) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_XML);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE,
+             "<uptime val=\"%lu\" unit=\"sec\"/>", clock_seconds());
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    REST.set_response_payload(response, coap_server_supported_msg,
+                              strlen(coap_server_supported_msg));
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_post_handler_cfg_reset(void *request, void *response, uint8_t *buffer,
+                           uint16_t preferred_size, int32_t *offset)
+{
+  cc26xx_web_demo_restore_defaults();
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_device_sw,
+         "title=\"Software version\";rt=\"text\"",
+         res_get_handler_sw,
+         NULL,
+         NULL,
+         NULL);
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_device_uptime,
+         "title=\"Uptime\";rt=\"seconds\"",
+         res_get_handler_uptime,
+         NULL,
+         NULL,
+         NULL);
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_device_hw,
+         "title=\"Hardware version\";rt=\"text\"",
+         res_get_handler_hw,
+         NULL,
+         NULL,
+         NULL);
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_device_cfg_reset,
+         "title=\"Reset Device Config: POST\";rt=\"Control\"",
+         NULL, res_post_handler_cfg_reset, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+/** @} */

examples/cc26xx/cc26xx-web-demo/resources/res-leds.c

@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *      CoAP resource handler for the CC26xx LEDs. Slightly modified copy of
+ *      the one found in Contiki's original CoAP example.
+ * \author
+ *      Matthias Kovatsch <kovatsch@inf.ethz.ch> (original)
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "rest-engine.h"
+#include "dev/leds.h"
+
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+static void
+res_post_put_handler(void *request, void *response, uint8_t *buffer,
+                     uint16_t preferred_size, int32_t *offset)
+{
+  size_t len = 0;
+  const char *color = NULL;
+  const char *mode = NULL;
+  uint8_t led = 0;
+  int success = 1;
+
+  if((len = REST.get_query_variable(request, "color", &color))) {
+    if(strncmp(color, "r", len) == 0) {
+      led = LEDS_RED;
+    } else if(strncmp(color, "g", len) == 0) {
+      led = LEDS_GREEN;
+#if BOARD_SMARTRF06EB
+    } else if(strncmp(color, "y", len) == 0) {
+      led = LEDS_YELLOW;
+    } else if(strncmp(color, "o", len) == 0) {
+      led = LEDS_ORANGE;
+#endif
+    } else {
+      success = 0;
+    }
+  } else {
+    success = 0;
+  }
+
+  if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
+    if(strncmp(mode, "on", len) == 0) {
+      leds_on(led);
+    } else if(strncmp(mode, "off", len) == 0) {
+      leds_off(led);
+    } else {
+      success = 0;
+    }
+  } else {
+    success = 0;
+  }
+
+  if(!success) {
+    REST.set_response_status(response, REST.status.BAD_REQUEST);
+  }
+}
+/*---------------------------------------------------------------------------*/
+/*
+ * A simple actuator example, depending on the color query parameter and post
+ * variable mode, corresponding led is activated or deactivated
+ */
+#if BOARD_SENSORTAG
+#define RESOURCE_PARAMS "r|g"
+#elif BOARD_SMARTRF06EB
+#define RESOURCE_PARAMS "r|g|y|o"
+#endif
+
+RESOURCE(res_leds,
+         "title=\"LEDs: ?color=" RESOURCE_PARAMS ", POST/PUT mode=on|off\";rt=\"Control\"",
+         NULL,
+         res_post_put_handler,
+         res_post_put_handler,
+         NULL);
+/*---------------------------------------------------------------------------*/
+/** @} */

examples/cc26xx/cc26xx-web-demo/resources/res-sensors.c

@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *  CoAP resource handler for the Sensortag-CC26xx sensors
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "rest-engine.h"
+#include "er-coap.h"
+#include "cc26xx-web-demo.h"
+#include "coap-server.h"
+
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+/*
+ * Generic resource handler for any sensor in this example. Ultimately gets
+ * called by all handlers and populates the CoAP response
+ */
+static void
+res_get_handler_all(int sens_type, void *request, void *response,
+                    uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
+{
+  unsigned int accept = -1;
+  const cc26xx_web_demo_sensor_reading_t *reading;
+
+  reading = cc26xx_web_demo_sensor_lookup(sens_type);
+
+  if(reading == NULL) {
+    REST.set_response_status(response, REST.status.NOT_FOUND);
+    REST.set_response_payload(response, coap_server_not_found_msg,
+                              strlen(coap_server_not_found_msg));
+    return;
+  }
+
+  REST.get_header_accept(request, &accept);
+
+  if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
+    REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%s", reading->converted);
+
+    REST.set_response_payload(response, (uint8_t *)buffer,
+                              strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_JSON) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{\"%s\":%s}",
+             reading->descr, reading->converted);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else if(accept == REST.type.APPLICATION_XML) {
+    REST.set_header_content_type(response, REST.type.APPLICATION_XML);
+    snprintf((char *)buffer, REST_MAX_CHUNK_SIZE,
+             "<%s val=\"%s\" unit=\"%s\"/>", reading->xml_element,
+             reading->converted, reading->units);
+
+    REST.set_response_payload(response, buffer, strlen((char *)buffer));
+  } else {
+    REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
+    REST.set_response_payload(response, coap_server_supported_msg,
+                              strlen(coap_server_supported_msg));
+  }
+}
+/*---------------------------------------------------------------------------*/
+/* BatMon resources and handler: Temperature, Voltage */
+static void
+res_get_handler_batmon_temp(void *request, void *response, uint8_t *buffer,
+                            uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_BATMON_TEMP, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_batmon_volt(void *request, void *response, uint8_t *buffer,
+                            uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_BATMON_VOLT, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_batmon_temp, "title=\"Battery Temp\";rt=\"C\"",
+         res_get_handler_batmon_temp, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_batmon_volt, "title=\"Battery Voltage\";rt=\"mV\"",
+         res_get_handler_batmon_volt, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+#if BOARD_SENSORTAG
+/*---------------------------------------------------------------------------*/
+/* MPU resources and handler: Accelerometer and Gyro */
+static void
+res_get_handler_mpu_acc_x(void *request, void *response, uint8_t *buffer,
+                          uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_ACC_X, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_mpu_acc_y(void *request, void *response, uint8_t *buffer,
+                          uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Y, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_mpu_acc_z(void *request, void *response, uint8_t *buffer,
+                          uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_ACC_Z, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_mpu_gyro_x(void *request, void *response, uint8_t *buffer,
+                           uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_X, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_mpu_gyro_y(void *request, void *response, uint8_t *buffer,
+                           uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Y, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_mpu_gyro_z(void *request, void *response, uint8_t *buffer,
+                           uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_MPU_GYRO_Z, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_mpu_acc_x, "title=\"Acc X\";rt=\"G\"", res_get_handler_mpu_acc_x,
+         NULL, NULL, NULL);
+RESOURCE(res_mpu_acc_y, "title=\"Acc Y\";rt=\"G\"", res_get_handler_mpu_acc_y,
+         NULL, NULL, NULL);
+RESOURCE(res_mpu_acc_z, "title=\"Acc Z\";rt=\"G\"", res_get_handler_mpu_acc_z,
+         NULL, NULL, NULL);
+
+RESOURCE(res_mpu_gyro_x, "title=\"Gyro X\";rt=\"deg/sec\"",
+         res_get_handler_mpu_gyro_x, NULL, NULL, NULL);
+RESOURCE(res_mpu_gyro_y, "title=\"Gyro Y\";rt=\"deg/sec\"",
+         res_get_handler_mpu_gyro_y, NULL, NULL, NULL);
+RESOURCE(res_mpu_gyro_z, "title=\"Gyro Z\";rt=\"deg/sec\"",
+         res_get_handler_mpu_gyro_z, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+/* TMP sensor resources and handlers: Object, Ambient */
+static void
+res_get_handler_obj_temp(void *request, void *response, uint8_t *buffer,
+                         uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_TMP_OBJECT, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_amb_temp(void *request, void *response, uint8_t *buffer,
+                         uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_TMP_AMBIENT, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_tmp007_obj, "title=\"Temperature (Object)\";rt=\"C\"",
+         res_get_handler_obj_temp, NULL, NULL, NULL);
+
+RESOURCE(res_tmp007_amb, "title=\"Temperature (Ambient)\";rt=\"C\"",
+         res_get_handler_amb_temp, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+/* BMP sensor resources: Temperature, Pressure */
+static void
+res_get_handler_bmp_temp(void *request, void *response, uint8_t *buffer,
+                         uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_BMP_TEMP, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_bmp_press(void *request, void *response, uint8_t *buffer,
+                          uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_BMP_PRES, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_bmp280_temp, "title=\"Barometer (Temperature)\";rt=\"C\"",
+         res_get_handler_bmp_temp, NULL, NULL, NULL);
+
+RESOURCE(res_bmp280_press,
+         "title=\"Barometer (Pressure)\";rt=\"hPa (hectopascal / millibar)\"",
+         res_get_handler_bmp_press, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+/* SHT21 sensor resources and handler: Temperature, Pressure */
+static void
+res_get_handler_sht_temp(void *request, void *response, uint8_t *buffer,
+                         uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_SHT_TEMP, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_get_handler_sht_humidity(void *request, void *response, uint8_t *buffer,
+                             uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_SHT_HUMIDITY, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_sht21_temp, "title=\"Temperature\";rt=\"C\"",
+         res_get_handler_sht_temp, NULL, NULL, NULL);
+
+RESOURCE(res_sht21_hum, "title=\"Humidity\";rt=\"%RH\"",
+         res_get_handler_sht_humidity, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+/* Illuminance resources and handler */
+static void
+res_get_handler_opt(void *request, void *response, uint8_t *buffer,
+                    uint16_t preferred_size, int32_t *offset)
+{
+  res_get_handler_all(CC26XX_WEB_DEMO_SENSOR_OPT_LIGHT, request, response,
+                      buffer, preferred_size, offset);
+}
+/*---------------------------------------------------------------------------*/
+RESOURCE(res_opt3001_light, "title=\"Illuminance\";rt=\"Lux\"",
+         res_get_handler_opt, NULL, NULL, NULL);
+/*---------------------------------------------------------------------------*/
+#endif /* BOARD_SENSORTAG */
+/*---------------------------------------------------------------------------*/
+/** @} */

examples/cc26xx/cc26xx-web-demo/resources/res-toggle-leds.c

@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-web-demo
+ * @{
+ *
+ * \file
+ *      CoAP resource to toggle LEDs. Slightly modified copy of the one found
+ *      in Contiki's original CoAP example.
+ * \author
+ *      Matthias Kovatsch <kovatsch@inf.ethz.ch> (original)
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "rest-engine.h"
+#include "dev/leds.h"
+
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+static void
+res_post_handler_red(void *request, void *response, uint8_t *buffer,
+                     uint16_t preferred_size, int32_t *offset)
+{
+  leds_toggle(LEDS_RED);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_post_handler_green(void *request, void *response, uint8_t *buffer,
+                       uint16_t preferred_size, int32_t *offset)
+{
+  leds_toggle(LEDS_GREEN);
+}
+/*---------------------------------------------------------------------------*/
+/* Toggles the red led */
+RESOURCE(res_toggle_red,
+         "title=\"Red LED\";rt=\"Control\"",
+         NULL,
+         res_post_handler_red,
+         NULL,
+         NULL);
+
+/* Toggles the green led */
+RESOURCE(res_toggle_green,
+         "title=\"Green LED\";rt=\"Control\"",
+         NULL,
+         res_post_handler_green,
+         NULL,
+         NULL);
+/*---------------------------------------------------------------------------*/
+/* An additional 2 LEDs on the Srf */
+#if BOARD_SMARTRF06EB
+/*---------------------------------------------------------------------------*/
+static void
+res_post_handler_yellow(void *request, void *response, uint8_t *buffer,
+                        uint16_t preferred_size, int32_t *offset)
+{
+  leds_toggle(LEDS_YELLOW);
+}
+/*---------------------------------------------------------------------------*/
+static void
+res_post_handler_orange(void *request, void *response, uint8_t *buffer,
+                        uint16_t preferred_size, int32_t *offset)
+{
+  leds_toggle(LEDS_ORANGE);
+}
+/*---------------------------------------------------------------------------*/
+/* Toggles the yellow led */
+RESOURCE(res_toggle_yellow,
+         "title=\"Yellow LED\";rt=\"Control\"",
+         NULL,
+         res_post_handler_yellow,
+         NULL,
+         NULL);
+
+/* Toggles the orange led */
+RESOURCE(res_toggle_orange,
+         "title=\"Orange LED\";rt=\"Control\"",
+         NULL,
+         res_post_handler_orange,
+         NULL,
+         NULL);
+#endif
+/*---------------------------------------------------------------------------*/
+/** @} */

examples/cc26xx/project-conf.h

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef PROJECT_CONF_H_
+#define PROJECT_CONF_H_
+/*---------------------------------------------------------------------------*/
+/* Disable button shutdown functionality */
+#define BUTTON_SENSOR_CONF_ENABLE_SHUTDOWN    0
+/*---------------------------------------------------------------------------*/
+/* Change to match your configuration */
+#define NETSTACK_CONF_RDC     contikimac_driver
+#define IEEE802154_CONF_PANID            0xABCD
+#define CC26XX_RF_CONF_CHANNEL               25
+#define CC26XX_MODEL_CONF_CPU_VARIANT      2650 /* CC2650 */
+#define CC26XX_RF_CONF_BLE_SUPPORT            1 /* Only available with CC2650 */
+/*---------------------------------------------------------------------------*/
+#endif /* PROJECT_CONF_H_ */
+/*---------------------------------------------------------------------------*/

examples/er-rest-example/er-example-observe-client.c

@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2014, Daniele Alessandrelli.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ */
+
+/**
+ * \file
+ *      Erbium (Er) CoAP observe client example.
+ * \author
+ *      Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "contiki.h"
+#include "contiki-net.h"
+#include "er-coap-engine.h"
+#include "dev/button-sensor.h"
+
+/*----------------------------------------------------------------------------*/
+#define DEBUG 0
+#if DEBUG
+#define PRINTF(...) printf(__VA_ARGS__)
+#define PRINTFLN(format, ...) printf(format "\n", ##__VA_ARGS__)
+#define PRINT6ADDR(addr) PRINTF("[%02x%02x:%02x%02x:%02x%02x:%02x%02x:" \
+                                "%02x%02x:%02x%02x:%02x%02x:%02x%02x]", \
+                                ((uint8_t *)addr)[0], ((uint8_t *)addr)[1], \
+                                ((uint8_t *)addr)[2], ((uint8_t *)addr)[3], \
+                                ((uint8_t *)addr)[4], ((uint8_t *)addr)[5], \
+                                ((uint8_t *)addr)[6], ((uint8_t *)addr)[7], \
+                                ((uint8_t *)addr)[8], ((uint8_t *)addr)[9], \
+                                ((uint8_t *)addr)[10], ((uint8_t *)addr)[11], \
+                                ((uint8_t *)addr)[12], ((uint8_t *)addr)[13], \
+                                ((uint8_t *)addr)[14], ((uint8_t *)addr)[15])
+#else
+#define PRINTF(...)
+#define PRINT6ADDR(addr)
+#define PRINTFLN(...)
+#endif
+
+/*----------------------------------------------------------------------------*/
+/* FIXME: This server address is hard-coded for Cooja */
+#define SERVER_NODE(ipaddr)   uip_ip6addr(ipaddr, 0xfe80, 0, 0, 0, 0x0212, \
+                                          0x7402, 0x0002, 0x0202)
+#define REMOTE_PORT     UIP_HTONS(COAP_DEFAULT_PORT)
+/* Toggle interval in seconds */
+#define TOGGLE_INTERVAL 30
+/* The path of the resource to observe */
+#define OBS_RESOURCE_URI "test/push"
+
+/*----------------------------------------------------------------------------*/
+static uip_ipaddr_t server_ipaddr[1]; /* holds the server ip address */
+static coap_observee_t *obs;
+
+/*----------------------------------------------------------------------------*/
+PROCESS(er_example_observe_client, "Erbium Coap Observe Client Example");
+AUTOSTART_PROCESSES(&er_example_observe_client);
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Handle the response to the observe request and the following notifications
+ */
+static void
+notification_callback(coap_observee_t *obs, void *notification,
+                      coap_notification_flag_t flag)
+{
+  int len = 0;
+  const uint8_t *payload = NULL;
+
+  printf("Notification handler\n");
+  printf("Observee URI: %s\n", obs->url);
+  if(notification) {
+    len = coap_get_payload(notification, &payload);
+  }
+  switch(flag) {
+  case NOTIFICATION_OK:
+    printf("NOTIFICATION OK: %*s\n", len, (char *)payload);
+    break;
+  case OBSERVE_OK: /* server accepeted observation request */
+    printf("OBSERVE_OK: %*s\n", len, (char *)payload);
+    break;
+  case OBSERVE_NOT_SUPPORTED:
+    printf("OBSERVE_NOT_SUPPORTED: %*s\n", len, (char *)payload);
+    obs = NULL;
+    break;
+  case ERROR_RESPONSE_CODE:
+    printf("ERROR_RESPONSE_CODE: %*s\n", len, (char *)payload);
+    obs = NULL;
+    break;
+  case NO_REPLY_FROM_SERVER:
+    printf("NO_REPLY_FROM_SERVER: "
+           "removing observe registration with token %x%x\n",
+           obs->token[0], obs->token[1]);
+    obs = NULL;
+    break;
+  }
+}
+/*----------------------------------------------------------------------------*/
+/*
+ * Toggle the observation of the remote resource
+ */
+void
+toggle_observation(void)
+{
+  if(obs) {
+    printf("Stopping observation\n");
+    coap_obs_remove_observee(obs);
+    obs = NULL;
+  } else {
+    printf("Starting observation\n");
+    obs = coap_obs_request_registration(server_ipaddr, REMOTE_PORT,
+                                        OBS_RESOURCE_URI, notification_callback, NULL);
+  }
+}
+/*----------------------------------------------------------------------------*/
+/*
+ * The main (proto-)thread. It starts/stops the observation of the remote
+ * resource every time the timer elapses or the button (if available) is
+ * pressed
+ */
+PROCESS_THREAD(er_example_observe_client, ev, data)
+{
+  PROCESS_BEGIN();
+
+  static struct etimer et;
+
+  /* store server address in server_ipaddr */
+  SERVER_NODE(server_ipaddr);
+  /* receives all CoAP messages */
+  coap_init_engine();
+  /* init timer and button (if available) */
+  etimer_set(&et, TOGGLE_INTERVAL * CLOCK_SECOND);
+#if PLATFORM_HAS_BUTTON
+  SENSORS_ACTIVATE(button_sensor);
+  printf("Press a button to start/stop observation of remote resource\n");
+#endif
+  /* toggle observation every time the timer elapses or the button is pressed */
+  while(1) {
+    PROCESS_YIELD();
+    if(etimer_expired(&et)) {
+      printf("--Toggle timer--\n");
+      toggle_observation();
+      printf("\n--Done--\n");
+      etimer_reset(&et);
+#if PLATFORM_HAS_BUTTON
+    } else if(ev == sensors_event && data == &button_sensor) {
+      printf("--Toggle tutton--\n");
+      toggle_observation();
+      printf("\n--Done--\n");
+#endif
+    }
+  }
+  PROCESS_END();
+}

examples/er-rest-example/project-conf.h

@@ -93,4 +93,6 @@
 #undef COAP_PROXY_OPTION_PROCESSING
 #define COAP_PROXY_OPTION_PROCESSING   0
 
+/* Enable client-side support for COAP observe */
+#define COAP_OBSERVE_CLIENT 1
 #endif /* __PROJECT_ERBIUM_CONF_H__ */

examples/er-rest-example/server-client-observe.csc

@@ -0,0 +1,203 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<simconf>
+  <project EXPORT="discard">[APPS_DIR]/mrm</project>
+  <project EXPORT="discard">[APPS_DIR]/mspsim</project>
+  <project EXPORT="discard">[APPS_DIR]/avrora</project>
+  <project EXPORT="discard">[APPS_DIR]/serial_socket</project>
+  <project EXPORT="discard">[APPS_DIR]/collect-view</project>
+  <project EXPORT="discard">[APPS_DIR]/powertracker</project>
+  <simulation>
+    <title>REST with RPL router</title>
+    <speedlimit>1.0</speedlimit>
+    <randomseed>123456</randomseed>
+    <motedelay_us>1000000</motedelay_us>
+    <radiomedium>
+      org.contikios.cooja.radiomediums.UDGM
+      <transmitting_range>50.0</transmitting_range>
+      <interference_range>50.0</interference_range>
+      <success_ratio_tx>1.0</success_ratio_tx>
+      <success_ratio_rx>1.0</success_ratio_rx>
+    </radiomedium>
+    <events>
+      <logoutput>40000</logoutput>
+    </events>
+    <motetype>
+      org.contikios.cooja.mspmote.SkyMoteType
+      <identifier>rplroot</identifier>
+      <description>Sky RPL Root</description>
+      <source EXPORT="discard">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.c</source>
+      <commands EXPORT="discard">make border-router.sky TARGET=sky</commands>
+      <firmware EXPORT="copy">[CONTIKI_DIR]/examples/ipv6/rpl-border-router/border-router.sky</firmware>
+      <moteinterface>org.contikios.cooja.interfaces.Position</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.RimeAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.IPAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.Mote2MoteRelations</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.MoteAttributes</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspClock</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspMoteID</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyButton</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyFlash</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspSerial</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyLED</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
+    </motetype>
+    <motetype>
+      org.contikios.cooja.mspmote.SkyMoteType
+      <identifier>server</identifier>
+      <description>Erbium Server</description>
+      <source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.c</source>
+      <commands EXPORT="discard">make er-example-server.sky TARGET=sky</commands>
+      <firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-server.sky</firmware>
+      <moteinterface>org.contikios.cooja.interfaces.Position</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.RimeAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.IPAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.Mote2MoteRelations</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.MoteAttributes</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspClock</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspMoteID</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyButton</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyFlash</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspSerial</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyLED</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
+    </motetype>
+    <motetype>
+      org.contikios.cooja.mspmote.SkyMoteType
+      <identifier>client</identifier>
+      <description>Erbium Client</description>
+      <source EXPORT="discard">[CONTIKI_DIR]/examples/er-rest-example/er-example-observe-client.c</source>
+      <commands EXPORT="discard">make er-example-observe-client.sky TARGET=sky</commands>
+      <firmware EXPORT="copy">[CONTIKI_DIR]/examples/er-rest-example/er-example-observe-client.sky</firmware>
+      <moteinterface>org.contikios.cooja.interfaces.Position</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.RimeAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.IPAddress</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.Mote2MoteRelations</moteinterface>
+      <moteinterface>org.contikios.cooja.interfaces.MoteAttributes</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspClock</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspMoteID</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyButton</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyFlash</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyCoffeeFilesystem</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.Msp802154Radio</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspSerial</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyLED</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.MspDebugOutput</moteinterface>
+      <moteinterface>org.contikios.cooja.mspmote.interfaces.SkyTemperature</moteinterface>
+    </motetype>
+    <mote>
+      <breakpoints />
+      <interface_config>
+        org.contikios.cooja.interfaces.Position
+        <x>33.260163187353555</x>
+        <y>30.643217359962595</y>
+        <z>0.0</z>
+      </interface_config>
+      <interface_config>
+        org.contikios.cooja.mspmote.interfaces.MspMoteID
+        <id>1</id>
+      </interface_config>
+      <motetype_identifier>rplroot</motetype_identifier>
+    </mote>
+    <mote>
+      <breakpoints />
+      <interface_config>
+        org.contikios.cooja.interfaces.Position
+        <x>54.537149936813485</x>
+        <y>51.51086225537906</y>
+        <z>0.0</z>
+      </interface_config>
+      <interface_config>
+        org.contikios.cooja.mspmote.interfaces.MspMoteID
+        <id>2</id>
+      </interface_config>
+      <motetype_identifier>server</motetype_identifier>
+    </mote>
+    <mote>
+      <breakpoints />
+      <interface_config>
+        org.contikios.cooja.interfaces.Position
+        <x>77.97942851220571</x>
+        <y>67.86182390447284</y>
+        <z>0.0</z>
+      </interface_config>
+      <interface_config>
+        org.contikios.cooja.mspmote.interfaces.MspMoteID
+        <id>3</id>
+      </interface_config>
+      <motetype_identifier>client</motetype_identifier>
+    </mote>
+  </simulation>
+  <plugin>
+    org.contikios.cooja.plugins.SimControl
+    <width>259</width>
+    <z>3</z>
+    <height>179</height>
+    <location_x>2</location_x>
+    <location_y>1</location_y>
+  </plugin>
+  <plugin>
+    org.contikios.cooja.plugins.Visualizer
+    <plugin_config>
+      <skin>org.contikios.cooja.plugins.skins.IDVisualizerSkin</skin>
+      <skin>org.contikios.cooja.plugins.skins.UDGMVisualizerSkin</skin>
+      <skin>org.contikios.cooja.plugins.skins.MoteTypeVisualizerSkin</skin>
+      <skin>org.contikios.cooja.plugins.skins.AttributeVisualizerSkin</skin>
+      <skin>org.contikios.cooja.plugins.skins.LEDVisualizerSkin</skin>
+      <skin>org.contikios.cooja.plugins.skins.AddressVisualizerSkin</skin>
+      <viewport>2.092412892721766 0.0 0.0 2.092412892721766 34.70057915472623 -45.606066372444175</viewport>
+    </plugin_config>
+    <width>300</width>
+    <z>4</z>
+    <height>178</height>
+    <location_x>261</location_x>
+    <location_y>1</location_y>
+  </plugin>
+  <plugin>
+    org.contikios.cooja.plugins.LogListener
+    <plugin_config>
+      <filter />
+      <formatted_time />
+      <coloring />
+    </plugin_config>
+    <width>762</width>
+    <z>0</z>
+    <height>491</height>
+    <location_x>2</location_x>
+    <location_y>182</location_y>
+  </plugin>
+  <plugin>
+    org.contikios.cooja.plugins.RadioLogger
+    <plugin_config>
+      <split>167</split>
+      <formatted_time />
+      <showdups>false</showdups>
+      <hidenodests>false</hidenodests>
+      <analyzers name="6lowpan" />
+    </plugin_config>
+    <width>560</width>
+    <z>1</z>
+    <height>492</height>
+    <location_x>764</location_x>
+    <location_y>181</location_y>
+  </plugin>
+  <plugin>
+    org.contikios.cooja.serialsocket.SerialSocketServer
+    <mote_arg>0</mote_arg>
+    <plugin_config>
+      <port>60001</port>
+      <bound>true</bound>
+    </plugin_config>
+    <width>362</width>
+    <z>2</z>
+    <height>116</height>
+    <location_x>561</location_x>
+    <location_y>1</location_y>
+  </plugin>
+</simconf>
+

examples/z1/Makefile

@@ -5,7 +5,8 @@ endif
 # Enable to pull-in Z1SP specific test/source files
 ZOLERTIA_Z1SP=0
 
-CONTIKI_PROJECT = test-phidgets blink test-adxl345 test-tmp102 test-light-ziglet test-battery test-sht11 test-relay-phidget test-tlc59116
+CONTIKI_PROJECT = test-phidgets blink test-adxl345 test-tmp102 test-light-ziglet
+CONTIKI_PROJECT += test-battery test-relay-phidget test-tlc59116 test-sht25
 CONTIKI_SOURCEFILES += sht11.c
 APPS=serial-shell
 

examples/z1/test-sht25.c

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2015, Zolertia <http://www.zolertia.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/**
+ * \file
+ *         A quick program for testing the SHT25 temperature and humidity sensor
+ * \author
+ *         Antonio Lignan <alinan@zolertia.com>
+ */
+#include <stdio.h>
+#include "contiki.h"
+#include "dev/sht25.h"
+
+PROCESS(test_sht25_process, "SHT25 test");
+AUTOSTART_PROCESSES(&test_sht25_process);
+
+static struct etimer et;
+
+PROCESS_THREAD(test_sht25_process, ev, data)
+{
+  int16_t temperature, humidity;
+
+  PROCESS_BEGIN();
+  SENSORS_ACTIVATE(sht25);
+
+  while(1) {
+    etimer_set(&et, CLOCK_SECOND);
+    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
+    temperature = sht25.value(SHT25_VAL_TEMP);
+    printf("Temperature %d.%d ºC\n", temperature / 100, temperature % 100);
+    humidity = sht25.value(SHT25_VAL_HUM);
+    printf("Humidity %d.%d %RH\n", humidity / 100, humidity % 100);
+  }
+  PROCESS_END();
+}

platform/cc2538dk/dev/button-sensor.c

@@ -103,25 +103,17 @@ btn_callback(uint8_t port, uint8_t pin)
   }
 
   timer_set(&debouncetimer, CLOCK_SECOND / 8);
-  if(port == GPIO_A_NUM) {
+
+  if((port == BUTTON_SELECT_PORT) && (pin == BUTTON_SELECT_PIN)) {
     sensors_changed(&button_select_sensor);
-  } else if(port == GPIO_C_NUM) {
-    switch(pin) {
-    case BUTTON_LEFT_PIN:
+  } else if((port == BUTTON_LEFT_PORT) && (pin == BUTTON_LEFT_PIN)) {
     sensors_changed(&button_left_sensor);
-      break;
-    case BUTTON_RIGHT_PIN:
+  } else if((port == BUTTON_RIGHT_PORT) && (pin == BUTTON_RIGHT_PIN)) {
     sensors_changed(&button_right_sensor);
-      break;
-    case BUTTON_UP_PIN:
+  } else if((port == BUTTON_UP_PORT) && (pin == BUTTON_UP_PIN)) {
     sensors_changed(&button_up_sensor);
-      break;
-    case BUTTON_DOWN_PIN:
+  } else if((port == BUTTON_DOWN_PORT) && (pin == BUTTON_DOWN_PIN)) {
     sensors_changed(&button_down_sensor);
-      break;
-    default:
-      return;
-    }
   }
 }
 /*---------------------------------------------------------------------------*/

platform/srf06-cc26xx/Makefile.srf06-cc26xx

@@ -0,0 +1,36 @@
+# srf06-cc26xx platform makefile
+
+ifndef CONTIKI
+  $(error CONTIKI not defined! You must specify where CONTIKI resides!)
+endif
+
+### Board and BSP selection
+ifeq ($(BOARD),)
+  BOARD=srf06
+endif
+
+### Configure the build for the board and pull in board-specific sources
+CONTIKI_TARGET_DIRS += . $(BOARD)
+PLATFORM_ROOT_DIR = $(CONTIKI)/platform/$(TARGET)
+
+### Include the board dir if one exists
+-include $(PLATFORM_ROOT_DIR)/$(BOARD)/Makefile.$(BOARD)
+
+CONTIKI_TARGET_SOURCEFILES += contiki-main.c
+CONTIKI_TARGET_SOURCEFILES += sensors.c leds.c
+CONTIKI_TARGET_SOURCEFILES += $(BOARD_SOURCEFILES)
+
+CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
+
+CLEAN += *.srf06-cc26xx
+
+### Unless the example dictates otherwise, build with code size optimisations
+ifndef SMALL
+  SMALL = 0
+endif
+
+### Define the CPU directory
+CONTIKI_CPU=$(CONTIKI)/cpu/cc26xx
+include $(CONTIKI_CPU)/Makefile.cc26xx
+
+MODULES += core/net core/net/mac core/net/mac/contikimac core/net/llsec

platform/srf06-cc26xx/README.md

@@ -0,0 +1,180 @@
+Getting Started with Contiki for TI CC26xx
+==========================================
+
+This guide's aim is to help you start using Contiki for TI's CC26xx. The
+platform supports two different boards:
+
+* SmartRF 06 Evaluation Board with a CC26xx Evaluation Module (relevant files
+  and drivers are under `srf06/`)
+* CC26xx SensorTag 2.0 (relevant drivers under `sensortag/`)
+
+The CPU code, common for both platforms, can be found under `$(CONTIKI)/cpu/cc26xx`.
+The port was developed and tested with CC2650s, but the intention is for it to
+work with the CC2630 as well. Thus, bug reports are welcome for both chips.
+Bear in mind that the CC2630 does not have BLE capability.
+
+This port is only meant to work with 7x7mm chips
+
+This guide assumes that you have basic understanding of how to use the command
+line and perform basic admin tasks on UNIX family OSs.
+
+Port Features
+=============
+The platform has the following key features:
+
+* Deep Sleep support with RAM retention for ultra-low energy consumption.
+* Support for CC26xx RF in IEEE as well as BLE mode (BLE support is very basic
+  since Contiki does not provide a BLE stack).
+
+In terms of hardware support, the following drivers have been implemented:
+
+* SmartRF06 EB peripherals
+  * LEDs
+  * Buttons
+  * UART connectivity over the XDS100v3 backchannel
+* SensorTag 2.0
+  * LEDs
+  * Buttons (One of the buttons can be used as a shutdown button)
+  * Reed relay
+  * Motion Processing Unit (MPU9250 - Accelerometer, Gyro)
+  * BMP280 sensor
+  * TMP007 sensor
+  * SHT21 sensor
+  * OPT3001 sensor
+  * Buzzer
+  * External SPI flash
+
+Examples
+========
+The port comes with two examples: A very basic example and a mode advanced one
+(web demo). The former demonstrates how to read sensors and how to use board
+peripherals. It also demonstrates how to send out BLE advertisements.
+The latter includes a CoAP server, an MQTT client which connects and publishes
+to the IBM quickstart service, a net-based UART and lastly a web server that
+can be used to configure the rest of the example.
+
+More details about those two examples can be found in their respective READMEs.
+
+Requirements
+============
+To use the port you need:
+
+* TI's CC26xxware sources (more below)
+* Software to program the nodes. Use TI's SmartRF Flash Programmer
+* A toolchain to build firmware: The port has been developed and tested with
+  GNU Tools for ARM Embedded Processors <https://launchpad.net/gcc-arm-embedded>.
+  The port was developed and tested using this version:
+
+    $ arm-none-eabi-gcc -v
+    [...]
+    gcc version 4.9.3 20141119 (release) [ARM/embedded-4_9-branch revision 218278] (GNU Tools for ARM Embedded Processors)
+
+* You may also need other drivers so that the SmartRF can communicate with your
+operating system and so that you can use the chip's UART for I/O. Please read
+the section ["Drivers" in the CC2538DK readme](https://github.com/contiki-os/contiki/tree/master/platform/cc2538dk#drivers).
+
+Environment
+===========
+To use this port, you will need to download and extract CC26xxware sources, 
+provided by TI here http://www.ti.com/tool/cc26xxware. Once you have done this, you will need to configure the Contiki
+build system so that it can locate and compile them as part of the build process.
+
+To do this, you will need to set the following environment variable:
+
+*  `TI_CC26XXWARE`
+
+    Stores the path to a directory containing the following:
+
+    * cc26xxware sources under `$(TI_CC26XXWARE)/driverlib`
+    * cc26xxware includes under `$(TI_CC26XXWARE)/inc`
+    * Startup files under `$(TI_CC26XXWARE)/startup_files`
+
+This _must_ be a path relative to the Contiki source directory. For
+example, if Contiki is in `/home/user/contiki-2.x` and the CC26xxware is in
+`/home/user/cc26xxware`, then `TI_CC26XXWARE` must be set to `../cc26xxware`
+
+The variable can be set within the example's Makefile, by adding this:
+
+    TI_CC26XXWARE=../cc26xxware
+
+or you can use an environment variable, like so:
+
+    export TI_CC26XXWARE=../cc26xxware
+
+Filename conflicts between Contiki and CC26xxware
+=================================================
+There is a file called `timer.c` both in Contiki as well as in CC26xxware. The
+way things are configured now, we don't use the latter. However, if you need to
+start using it at some point, you will need to rename it:
+
+From `$(TI_CC26XXWARE)/driverlib/cc26xx/source/timer.c` to `driverlib-timer.c`
+
+Sensortag vs Srf06
+==================
+To build for the sensortag, set `BOARD=sensortag`. You can do that by exporting
+it as an environment variable, by adding it to your Makefile or by adding it to
+your make command as an argument
+
+If the `BOARD` variable is not equal to `sensortag`, an image for the Srf06
+CC26XXEM will be built instead.
+
+If you want to switch between building for one platform to the other, make
+certain to `make clean` before building for the new one, or you will get linker
+errors.
+
+Low Power Operation
+===================
+The platform takes advantage of the CC26xx's power saving features. In a
+nutshell, here is how things work:
+
+* When the RF is TXing, the CPU will enter sleep mode and will resume after TX
+  has completed.
+* When there are no events in the Contiki event queue, the chip will enter
+  'some' low power mode (more below).
+
+We do not use pre-defined power profiles (e.g. as mentioned in the TRM or as
+we do for the CC2538 with LPM1, LPM2 etc). Each time we enter low power
+operation, we either put the CM3 to sleep or to deep sleep. The latter case is
+highly configurable: the LPM engine allows other code modules to register
+themselves for notifications and to configure low power operation. With these
+facilities, a module can e.g. prohibit deep sleep altogether, or it can request
+that a power domain be kept powered. The LPM engine will turn off as many
+CC26xx components as it can while satisfying all restrictions set by registered
+modules.
+
+To determine which power mode to use, the following logic is followed:
+
+* The deepest available low power mode can be hard-coded by using
+  the `LPM_MODE_MAX_SUPPORTED` macro in the LPM driver (`lpm.[ch]`). Thus, it
+  is possible to prohibit deep sleep altogether.
+* Code modules which are affected by low power operation can 'register'
+  themselves with the LPM driver.
+* If the projected low-power duration is lower than `STANDBY_MIN_DURATION`,
+  the chip will simply sleep.
+* If the projected low power duration is sufficiently long, the LPM will visit
+  all registered modules to query the maximum allowed power mode (maximum means
+  sleep vs deep sleep in this context). It will then drop to this power mode.
+  This is where a code module can forbid deep sleep if required.
+* All registered modules will be notified when the chip is about to enter
+  deep sleep, as well as after wake-up.
+
+When the chip does enter deep sleep:
+
+* The RF Core, VIMS, SYSBUS and CPU power domains are always turned off. Due to
+  the way the RF driver works, the RFCORE PD should be off already.
+* Peripheral clocks stop
+* The Serial and Peripheral power domains are turned off, unless an LPM module
+  requests them to stay operational. For example, the net-uart demo keeps the
+  serial power domain powered on and the UART clocked under sleep and deep
+  sleep in order to retain UART RX functionality.
+* If both SERIAL and PERIPH PDs are turned off, we also switch power source to
+  the uLDO for ultra low leakage under deep sleep.
+
+The chip will come out of low power mode by one of the following events:
+
+* Button press or, in the case of the SensorTag, a reed relay trigger
+* Software clock tick (timer). The clock ticks at 128Hz, therefore the maximum
+  time we will ever spend in a sleep mode is 7.8125ms. In hardware terms, this
+  is an AON RTC Channel 2 compare interrupt.
+* Rtimer triggers, as part of ContikiMAC's sleep/wake-up cycles. The rtimer
+  sits on the AON RTC channel 0.

platform/srf06-cc26xx/contiki-conf.h

@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * \addtogroup cc26xx-srf-tag
+ * @{
+ *
+ * \file
+ *  Configuration for the srf06-cc26xx platform
+ */
+#ifndef CONTIKI_CONF_H
+#define CONTIKI_CONF_H
+
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+/* Include Project Specific conf */
+#ifdef PROJECT_CONF_H
+#include PROJECT_CONF_H
+#endif /* PROJECT_CONF_H */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name CC26xx flavour selection
+ * @{
+ */
+#ifndef CC26XX_MODEL_CONF_CPU_VARIANT
+#define CC26XX_MODEL_CONF_CPU_VARIANT 2650 /**< 2650 => CC2650, 2630 => CC2630 */
+
+#endif
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Network Stack Configuration
+ *
+ * @{
+ */
+#ifndef NETSTACK_CONF_NETWORK
+#if NETSTACK_CONF_WITH_IPV6
+#define NETSTACK_CONF_NETWORK sicslowpan_driver
+#else
+#define NETSTACK_CONF_NETWORK rime_driver
+#endif /* NETSTACK_CONF_WITH_IPV6 */
+#endif /* NETSTACK_CONF_NETWORK */
+
+#ifndef NETSTACK_CONF_MAC
+#define NETSTACK_CONF_MAC     csma_driver
+#endif
+
+#ifndef NETSTACK_CONF_RDC
+#define NETSTACK_CONF_RDC     contikimac_driver
+#endif
+
+/* Configure NullRDC for when it's selected */
+#define NULLRDC_802154_AUTOACK                  1
+#define NULLRDC_802154_AUTOACK_HW               1
+
+/* Configure ContikiMAC for when it's selected */
+#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER  0
+#define CONTIKIMAC_CONF_WITH_PHASE_OPTIMIZATION 0
+#define WITH_FAST_SLEEP                         1
+
+#ifndef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
+#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE    8
+#endif
+
+#ifndef NETSTACK_CONF_FRAMER
+#define NETSTACK_CONF_FRAMER  framer_802154
+#endif
+
+#define NETSTACK_CONF_RADIO   cc26xx_rf_driver
+#define NETSTACK_RADIO_MAX_PAYLOAD_LEN        125
+
+/* 6LoWPAN */
+#define SICSLOWPAN_CONF_COMPRESSION          SICSLOWPAN_COMPRESSION_HC06
+#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD  63
+#define SICSLOWPAN_CONF_FRAG                    1
+#define SICSLOWPAN_CONF_MAXAGE                  8
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name IEEE address configuration
+ *
+ * Used to generate our RIME & IPv6 address
+ * @{
+ */
+/**
+ * \brief Location of the IEEE address
+ * 0 => Read from InfoPage,
+ * 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
+ */
+#ifndef IEEE_ADDR_CONF_HARDCODED
+#define IEEE_ADDR_CONF_HARDCODED             0
+#endif
+
+/**
+ * \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
+ * is defined as 1
+ */
+#ifndef IEEE_ADDR_CONF_ADDRESS
+#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
+#endif
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name RF configuration
+ *
+ * @{
+ */
+/* RF Config */
+#ifndef IEEE802154_CONF_PANID
+#define IEEE802154_CONF_PANID           0xABCD /**< Default PAN ID */
+#endif
+
+#ifndef CC26XX_RF_CONF_CHANNEL
+#define CC26XX_RF_CONF_CHANNEL              25 /**< Default RF channel */
+#endif
+
+#ifndef CC26XX_RF_CONF_AUTOACK
+#define CC26XX_RF_CONF_AUTOACK               1 /**< RF H/W generates ACKs */
+#endif
+
+#ifndef CC26XX_RF_CONF_PROMISCOUS
+#define CC26XX_RF_CONF_PROMISCOUS            0 /**< 1 to enable promiscous mode */
+#endif
+
+#ifndef CC26XX_RF_CONF_BLE_SUPPORT
+#define CC26XX_RF_CONF_BLE_SUPPORT           0 /**< 0 to disable BLE support */
+#endif
+
+/*
+ * Patch Management for the CPE itself and for BLE and IEEE modes
+ *
+ * Don't change these unless you know what you're doing
+ */
+#ifndef CC26XX_CONF_CPE_HAS_PATCHES
+#define CC26XX_CONF_CPE_HAS_PATCHES          0 /**< 1 to enable patching the CPE */
+#endif
+
+#ifndef CC26XX_CONF_BLE_HAS_PATCHES
+#define CC26XX_CONF_BLE_HAS_PATCHES          0 /**< 1 to enable patching BLE mode */
+#endif
+
+#ifndef CC26XX_CONF_IEEE_HAS_PATCHES
+#define CC26XX_CONF_IEEE_HAS_PATCHES         0 /**< 1 to enable patching IEEE mode */
+#endif
+/** @} */
+/*---------------------------------------------------------------------------*/
+/** @} */
+/**
+ * \name IPv6, RIME and network buffer configuration
+ *
+ * @{
+ */
+/* Don't let contiki-default-conf.h decide if we are an IPv6 build */
+#ifndef NETSTACK_CONF_WITH_IPV6
+#define NETSTACK_CONF_WITH_IPV6              0
+#endif
+
+#if NETSTACK_CONF_WITH_IPV6
+/*---------------------------------------------------------------------------*/
+/* Addresses, Sizes and Interfaces */
+#define LINKADDR_CONF_SIZE                   8
+#define UIP_CONF_LL_802154                   1
+#define UIP_CONF_LLH_LEN                     0
+
+/* The size of the uIP main buffer */
+#ifndef UIP_CONF_BUFFER_SIZE
+#define UIP_CONF_BUFFER_SIZE              1000
+#endif
+
+/* ND and Routing */
+#ifndef UIP_CONF_ROUTER
+#define UIP_CONF_ROUTER                      1
+#endif
+
+#define UIP_CONF_ND6_SEND_RA                 0
+#define UIP_CONF_IP_FORWARD                  0
+#define RPL_CONF_STATS                       0
+#define RPL_CONF_MAX_DAG_ENTRIES             1
+#ifndef RPL_CONF_OF
+#define RPL_CONF_OF rpl_mrhof
+#endif
+
+#define UIP_CONF_ND6_REACHABLE_TIME     600000
+#define UIP_CONF_ND6_RETRANS_TIMER       10000
+
+#ifndef NBR_TABLE_CONF_MAX_NEIGHBORS
+#define NBR_TABLE_CONF_MAX_NEIGHBORS        20
+#endif
+#ifndef UIP_CONF_MAX_ROUTES
+#define UIP_CONF_MAX_ROUTES                 20
+#endif
+
+#ifndef UIP_CONF_TCP
+#define UIP_CONF_TCP                         1
+#endif
+#ifndef UIP_CONF_TCP_MSS
+#define UIP_CONF_TCP_MSS                   128
+#endif
+
+#define UIP_CONF_UDP                         1
+#define UIP_CONF_UDP_CHECKSUMS               1
+#define UIP_CONF_ICMP6                       1
+/*---------------------------------------------------------------------------*/
+#else /* NETSTACK_CONF_WITH_IPV6 */
+/* Network setup for non-IPv6 (rime). */
+#define UIP_CONF_IP_FORWARD                  1
+
+#define RIME_CONF_NO_POLITE_ANNOUCEMENTS     0
+
+#endif /* NETSTACK_CONF_WITH_IPV6 */
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Generic Configuration directives
+ *
+ * @{
+ */
+#ifndef ENERGEST_CONF_ON
+#define ENERGEST_CONF_ON            0 /**< Energest Module */
+#endif
+
+#ifndef STARTUP_CONF_VERBOSE
+#define STARTUP_CONF_VERBOSE        1 /**< Set to 0 to decrease startup verbosity */
+#endif
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Character I/O Configuration
+ *
+ * @{
+ */
+#ifndef CC26XX_UART_CONF_ENABLE
+#define CC26XX_UART_CONF_ENABLE            1 /**< Enable/Disable UART I/O */
+#endif
+
+#ifndef CC26XX_UART_CONF_BAUD_RATE
+#define CC26XX_UART_CONF_BAUD_RATE    115200 /**< Default UART0 baud rate */
+#endif
+
+/* Turn off example-provided putchars */
+#define SLIP_BRIDGE_CONF_NO_PUTCHAR        1
+#define SLIP_RADIO_CONF_NO_PUTCHAR         1
+
+#ifndef SLIP_ARCH_CONF_ENABLED
+/*
+ * Determine whether we need SLIP
+ * This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
+ * keep using SLIP
+ */
+#if defined (UIP_FALLBACK_INTERFACE) || defined (CMD_CONF_OUTPUT)
+#define SLIP_ARCH_CONF_ENABLED             1
+#endif
+#endif
+
+/**
+ * \brief Define this as 1 to build a headless node.
+ *
+ * The UART will not be initialised its clock will be gated, offering some
+ * energy savings. The USB will not be initialised either
+ */
+#ifndef CC26XX_CONF_QUIET
+#define CC26XX_CONF_QUIET                  0
+#endif
+
+/* CC26XX_CONF_QUIET is hard and overrides all other related defines */
+#if CC26XX_CONF_QUIET
+#undef CC26XX_UART_CONF_ENABLE
+#define CC26XX_UART_CONF_ENABLE            0
+
+#undef STARTUP_CONF_VERBOSE
+#define STARTUP_CONF_VERBOSE               0
+#endif /* CC26XX_CONF_QUIET */
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Button configurations
+ *
+ * Configure a button as power on/off: We use the right button for both boards.
+ * @{
+ */
+#ifndef BUTTON_SENSOR_CONF_ENABLE_SHUTDOWN
+#define BUTTON_SENSOR_CONF_ENABLE_SHUTDOWN 1
+#endif
+
+/* Notify various examples that we have Buttons */
+#define PLATFORM_HAS_BUTTON      1
+/** @} */
+/*---------------------------------------------------------------------------*/
+/* Platform-specific define to signify sensor reading failure */
+#define CC26XX_SENSOR_READING_ERROR        0x80000000
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Compiler configuration and platform-specific type definitions
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define CLOCK_CONF_SECOND 128
+
+/* Compiler configurations */
+#define CCIF
+#define CLIF
+
+/* Platform typedefs */
+typedef uint32_t clock_time_t;
+typedef uint32_t uip_stats_t;
+
+/* Clock (time) comparison macro */
+#define CLOCK_LT(a,b)  ((signed long)((a)-(b)) < 0)
+
+/*
+ * rtimer.h typedefs rtimer_clock_t as unsigned short. We need to define
+ * RTIMER_CLOCK_LT to override this
+ */
+typedef uint32_t rtimer_clock_t;
+#define RTIMER_CLOCK_LT(a,b)     ((int32_t)((a)-(b)) < 0)
+/** @} */
+/*---------------------------------------------------------------------------*/
+/* board.h assumes that basic configuration is done */
+#include "board.h"
+/*---------------------------------------------------------------------------*/
+#endif /* CONTIKI_CONF_H */
+
+/** @} */

platform/srf06-cc26xx/contiki-main.c

@@ -0,0 +1,256 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup cc26xx-platforms
+ * @{
+ *
+ * \defgroup cc26xx-srf-tag SmartRF+CC26xx EM and the CC26xx SensorTag 2.0
+ *
+ * This platform supports two different boards:
+ * 1) A standard TI SmartRF06EB with a CC26xx EM mounted on it and
+ * 2) The new TI SensorTag2.0
+ * @{
+ */
+#include "ti-lib.h"
+#include "contiki.h"
+#include "contiki-net.h"
+#include "leds.h"
+#include "lpm.h"
+#include "gpio-interrupt.h"
+#include "dev/watchdog.h"
+#include "ieee-addr.h"
+#include "vims.h"
+#include "cc26xx-model.h"
+#include "dev/cc26xx-uart.h"
+#include "dev/cc26xx-rtc.h"
+#include "dev/cc26xx-rf.h"
+#include "sys_ctrl.h"
+#include "uart.h"
+#include "sys/clock.h"
+#include "sys/rtimer.h"
+#include "lib/sensors.h"
+#include "button-sensor.h"
+#include "dev/serial-line.h"
+#include "net/mac/frame802154.h"
+
+#include "driverlib/driverlib_ver.h"
+
+#include <stdio.h>
+/*---------------------------------------------------------------------------*/
+static void
+fade(unsigned char l)
+{
+  volatile int i;
+  int k, j;
+  for(k = 0; k < 800; ++k) {
+    j = k > 400 ? 800 - k : k;
+
+    leds_on(l);
+    for(i = 0; i < j; ++i) {
+      __asm("nop");
+    }
+    leds_off(l);
+    for(i = 0; i < 400 - j; ++i) {
+      __asm("nop");
+    }
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+set_rf_params(void)
+{
+  uint16_t short_addr;
+  uint8_t ext_addr[8];
+  radio_value_t val = 0;
+
+  ieee_addr_cpy_to(ext_addr, 8);
+
+  short_addr = ext_addr[7];
+  short_addr |= ext_addr[6] << 8;
+
+  /* Populate linkaddr_node_addr. Maintain endianness */
+  memcpy(&linkaddr_node_addr, &ext_addr[8 - LINKADDR_SIZE], LINKADDR_SIZE);
+
+  NETSTACK_RADIO.set_value(RADIO_PARAM_PAN_ID, IEEE802154_PANID);
+  NETSTACK_RADIO.set_value(RADIO_PARAM_16BIT_ADDR, short_addr);
+  NETSTACK_RADIO.set_value(RADIO_PARAM_CHANNEL, CC26XX_RF_CHANNEL);
+  NETSTACK_RADIO.set_object(RADIO_PARAM_64BIT_ADDR, ext_addr, 8);
+
+  NETSTACK_RADIO.get_value(RADIO_PARAM_CHANNEL, &val);
+  printf(" RF: Channel %d\n", val);
+
+#if STARTUP_CONF_VERBOSE
+  {
+    int i;
+    printf(" Link layer addr: ");
+    for(i = 0; i < LINKADDR_SIZE - 1; i++) {
+      printf("%02x:", linkaddr_node_addr.u8[i]);
+    }
+    printf("%02x\n", linkaddr_node_addr.u8[i]);
+  }
+#endif
+}
+/*---------------------------------------------------------------------------*/
+static void
+select_lf_xosc(void)
+{
+  ti_lib_osc_interface_enable();
+
+  /* Make sure the SMPH clock within AUX is enabled */
+  ti_lib_aux_wuc_clock_enable(AUX_WUC_SMPH_CLOCK);
+  while(ti_lib_aux_wuc_clock_status(AUX_WUC_SMPH_CLOCK) != AUX_WUC_CLOCK_READY);
+
+  /* Switch LF clock source to the LF RCOSC if required */
+  if(ti_lib_osc_clock_source_get(OSC_SRC_CLK_LF) != OSC_XOSC_LF) {
+    ti_lib_osc_clock_source_set(OSC_SRC_CLK_LF, OSC_XOSC_LF);
+  }
+
+  ti_lib_osc_interface_disable();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Main function for CC26xx-based platforms
+ *
+ * The same main() is used for both Srf+CC26xxEM as well as for the SensorTag
+ */
+int
+main(void)
+{
+  /* Set the LF XOSC as the LF system clock source */
+  select_lf_xosc();
+
+  /*
+   * Make sure to open the latches - this will be important when returning
+   * from shutdown
+   */
+  ti_lib_pwr_ctrl_io_freeze_disable();
+
+  /* Use DCDC instead of LDO to save current */
+  ti_lib_pwr_ctrl_source_set(PWRCTRL_PWRSRC_DCDC);
+
+  lpm_init();
+
+  board_init();
+
+  /* Enable flash cache and prefetch. */
+  ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_ENABLED);
+  ti_lib_vims_configure(VIMS_BASE, true, true);
+
+  gpio_interrupt_init();
+
+  /* Clock must always be enabled for the semaphore module */
+  HWREG(AUX_WUC_BASE + AUX_WUC_O_MODCLKEN1) = AUX_WUC_MODCLKEN1_SMPH;
+
+  leds_init();
+
+  fade(LEDS_RED);
+
+  cc26xx_rtc_init();
+  clock_init();
+  rtimer_init();
+
+  board_init();
+
+  watchdog_init();
+  process_init();
+
+  random_init(0x1234);
+
+  /* Character I/O Initialisation */
+#if CC26XX_UART_CONF_ENABLE
+  cc26xx_uart_init();
+  cc26xx_uart_set_input(serial_line_input_byte);
+#endif
+
+  serial_line_init();
+
+  printf("Starting " CONTIKI_VERSION_STRING "\n");
+  printf("With CC26xxware v%u.%02u.%02u.%u\n", DRIVERLIB_MAJOR_VER,
+         DRIVERLIB_MINOR_VER, DRIVERLIB_PATCH_VER, DRIVERLIB_BUILD_ID);
+  printf(BOARD_STRING " using CC%u\n", CC26XX_MODEL_CPU_VARIANT);
+
+  process_start(&etimer_process, NULL);
+  ctimer_init();
+
+  energest_init();
+  ENERGEST_ON(ENERGEST_TYPE_CPU);
+
+  fade(LEDS_YELLOW);
+
+  printf(" Net: ");
+  printf("%s\n", NETSTACK_NETWORK.name);
+  printf(" MAC: ");
+  printf("%s\n", NETSTACK_MAC.name);
+  printf(" RDC: ");
+  printf("%s", NETSTACK_RDC.name);
+
+  if(NETSTACK_RDC.channel_check_interval() != 0) {
+    printf(", Channel Check Interval: %u ticks",
+           NETSTACK_RDC.channel_check_interval());
+  }
+  printf("\n");
+
+  netstack_init();
+
+  set_rf_params();
+
+#if NETSTACK_CONF_WITH_IPV6
+  memcpy(&uip_lladdr.addr, &linkaddr_node_addr, sizeof(uip_lladdr.addr));
+  queuebuf_init();
+  process_start(&tcpip_process, NULL);
+#endif /* NETSTACK_CONF_WITH_IPV6 */
+
+  fade(LEDS_GREEN);
+
+  process_start(&sensors_process, NULL);
+
+  autostart_start(autostart_processes);
+
+  watchdog_start();
+
+  fade(LEDS_ORANGE);
+
+  while(1) {
+    uint8_t r;
+    do {
+      r = process_run();
+      watchdog_periodic();
+    } while(r > 0);
+
+    /* Drop to some low power mode */
+    lpm_drop();
+  }
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

platform/srf06-cc26xx/sensortag/Makefile.sensortag

@@ -0,0 +1,8 @@
+CFLAGS += -DBOARD_SENSORTAG=1 -DTI_BSP_BOARD_HDR=\"ti-bsp-st.h\"
+CFLAGS += -DBACKDOOR_IOID=0x00000000
+
+BOARD_SOURCEFILES += leds-arch.c sensortag-sensors.c  sensor-common.c
+BOARD_SOURCEFILES += bmp-280-sensor.c tmp-007-sensor.c opt-3001-sensor.c
+BOARD_SOURCEFILES += sht-21-sensor.c mpu-9250-sensor.c button-sensor.c
+BOARD_SOURCEFILES += reed-relay.c ext-flash.c buzzer.c
+BOARD_SOURCEFILES += board.c board-spi.c board-i2c.c

platform/srf06-cc26xx/sensortag/bmp-280-sensor.c

@@ -0,0 +1,391 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-bmp-sensor
+ * @{
+ *
+ * \file
+ *  Driver for the Sensortag-CC26XX BMP280 Altimeter / Pressure Sensor
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "lib/sensors.h"
+#include "bmp-280-sensor.h"
+#include "sys/ctimer.h"
+#include "sensor-common.h"
+#include "board-i2c.h"
+#include "ti-lib.h"
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+/*---------------------------------------------------------------------------*/
+#define DEBUG 0
+#if DEBUG
+#define PRINTF(...) printf(__VA_ARGS__)
+#else
+#define PRINTF(...)
+#endif
+/*---------------------------------------------------------------------------*/
+#define BMP280_I2C_ADDRESS                  0x77
+/*---------------------------------------------------------------------------*/
+/* Registers */
+#define ADDR_CALIB                          0x88
+#define ADDR_PROD_ID                        0xD0
+#define ADDR_RESET                          0xE0
+#define ADDR_STATUS                         0xF3
+#define ADDR_CTRL_MEAS                      0xF4
+#define ADDR_CONFIG                         0xF5
+#define ADDR_PRESS_MSB                      0xF7
+#define ADDR_PRESS_LSB                      0xF8
+#define ADDR_PRESS_XLSB                     0xF9
+#define ADDR_TEMP_MSB                       0xFA
+#define ADDR_TEMP_LSB                       0xFB
+#define ADDR_TEMP_XLSB                      0xFC
+/*---------------------------------------------------------------------------*/
+/* Reset values */
+#define VAL_PROD_ID                         0x58
+#define VAL_RESET                           0x00
+#define VAL_STATUS                          0x00
+#define VAL_CTRL_MEAS                       0x00
+#define VAL_CONFIG                          0x00
+#define VAL_PRESS_MSB                       0x80
+#define VAL_PRESS_LSB                       0x00
+#define VAL_TEMP_MSB                        0x80
+#define VAL_TEMP_LSB                        0x00
+/*---------------------------------------------------------------------------*/
+/* Test values */
+#define VAL_RESET_EXECUTE                   0xB6
+#define VAL_CTRL_MEAS_TEST                  0x55
+/*---------------------------------------------------------------------------*/
+/* Misc. */
+#define MEAS_DATA_SIZE                      6
+#define CALIB_DATA_SIZE                     24
+/*---------------------------------------------------------------------------*/
+#define RES_OFF                             0
+#define RES_ULTRA_LOW_POWER                 1
+#define RES_LOW_POWER                       2
+#define RES_STANDARD                        3
+#define RES_HIGH                            5
+#define RES_ULTRA_HIGH                      6
+/*---------------------------------------------------------------------------*/
+/* Bit fields in CTRL_MEAS register */
+#define PM_OFF                              0
+#define PM_FORCED                           1
+#define PM_NORMAL                           3
+/*---------------------------------------------------------------------------*/
+#define OSRST(v)                            ((v) << 5)
+#define OSRSP(v)                            ((v) << 2)
+/*---------------------------------------------------------------------------*/
+typedef struct bmp_280_calibration {
+  uint16_t dig_t1;
+  int16_t dig_t2;
+  int16_t dig_t3;
+  uint16_t dig_p1;
+  int16_t dig_p2;
+  int16_t dig_p3;
+  int16_t dig_p4;
+  int16_t dig_p5;
+  int16_t dig_p6;
+  int16_t dig_p7;
+  int16_t dig_p8;
+  int16_t dig_p9;
+  int32_t t_fine;
+} bmp_280_calibration_t;
+/*---------------------------------------------------------------------------*/
+static uint8_t calibration_data[CALIB_DATA_SIZE];
+/*---------------------------------------------------------------------------*/
+#define SENSOR_STATUS_DISABLED     0
+#define SENSOR_STATUS_INITIALISED  1
+#define SENSOR_STATUS_NOT_READY    2
+#define SENSOR_STATUS_READY        3
+
+static int enabled = SENSOR_STATUS_DISABLED;
+/*---------------------------------------------------------------------------*/
+/* A buffer for the raw reading from the sensor */
+#define SENSOR_DATA_BUF_SIZE   6
+
+static uint8_t sensor_value[SENSOR_DATA_BUF_SIZE];
+/*---------------------------------------------------------------------------*/
+/* Wait SENSOR_STARTUP_DELAY clock ticks for the sensor to be ready - ~80ms */
+#define SENSOR_STARTUP_DELAY 11
+
+static struct ctimer startup_timer;
+/*---------------------------------------------------------------------------*/
+static void
+notify_ready(void *not_used)
+{
+  enabled = SENSOR_STATUS_READY;
+  sensors_changed(&bmp_280_sensor);
+}
+/*---------------------------------------------------------------------------*/
+static void
+select(void)
+{
+  /* Set up I2C */
+  board_i2c_select(BOARD_I2C_INTERFACE_0, BMP280_I2C_ADDRESS);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initalise the sensor
+ */
+static void
+init(void)
+{
+  uint8_t val;
+
+  select();
+
+  /* Read and store calibration data */
+  sensor_common_read_reg(ADDR_CALIB, calibration_data, CALIB_DATA_SIZE);
+
+  /* Reset the sensor */
+  val = VAL_RESET_EXECUTE;
+  sensor_common_write_reg(ADDR_RESET, &val, sizeof(val));
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Enable/disable measurements
+ * \param enable 0: disable, enable otherwise
+ *
+ * @return      none
+ */
+static void
+enable_sensor(bool enable)
+{
+  uint8_t val;
+
+  select();
+
+  if(enable) {
+    /* Enable forced mode */
+    val = PM_NORMAL | OSRSP(1) | OSRST(1);
+  } else {
+    val = PM_OFF;
+  }
+  sensor_common_write_reg(ADDR_CTRL_MEAS, &val, sizeof(val));
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Read temperature and pressure data
+ * \param data Pointer to a buffer where temperature and pressure will be
+ *             written (6 bytes)
+ * \return True if valid data could be retrieved
+ */
+static bool
+read_data(uint8_t *data)
+{
+  bool success;
+
+  select();
+
+  success = sensor_common_read_reg(ADDR_PRESS_MSB, data, MEAS_DATA_SIZE);
+  if(!success) {
+    sensor_common_set_error_data(data, MEAS_DATA_SIZE);
+  }
+
+  return success;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Convert raw data to values in degrees C (temp) and Pascal (pressure)
+ * \param data Pointer to a buffer that holds raw sensor data
+ * \param temp Pointer to a variable where the converted temperature will be
+ *             written
+ * \param press Pointer to a variable where the converted pressure will be
+ *              written
+ */
+static void
+convert(uint8_t *data, int32_t *temp, uint32_t *press)
+{
+  int32_t utemp, upress;
+  bmp_280_calibration_t *p = (bmp_280_calibration_t *)calibration_data;
+  int32_t v_x1_u32r;
+  int32_t v_x2_u32r;
+  int32_t temperature;
+  uint32_t pressure;
+
+  /* Pressure */
+  upress = (int32_t)((((uint32_t)(data[0])) << 12)
+                     | (((uint32_t)(data[1])) << 4) | ((uint32_t)data[2] >> 4));
+
+  /* Temperature */
+  utemp = (int32_t)((((uint32_t)(data[3])) << 12) | (((uint32_t)(data[4])) << 4)
+                    | ((uint32_t)data[5] >> 4));
+
+  /* Compensate temperature */
+  v_x1_u32r = ((((utemp >> 3) - ((int32_t)p->dig_t1 << 1)))
+               * ((int32_t)p->dig_t2)) >> 11;
+  v_x2_u32r = (((((utemp >> 4) - ((int32_t)p->dig_t1))
+                 * ((utemp >> 4) - ((int32_t)p->dig_t1))) >> 12)
+               * ((int32_t)p->dig_t3))
+    >> 14;
+  p->t_fine = v_x1_u32r + v_x2_u32r;
+  temperature = (p->t_fine * 5 + 128) >> 8;
+  *temp = temperature;
+
+  /* Compensate pressure */
+  v_x1_u32r = (((int32_t)p->t_fine) >> 1) - (int32_t)64000;
+  v_x2_u32r = (((v_x1_u32r >> 2) * (v_x1_u32r >> 2)) >> 11)
+    * ((int32_t)p->dig_p6);
+  v_x2_u32r = v_x2_u32r + ((v_x1_u32r * ((int32_t)p->dig_p5)) << 1);
+  v_x2_u32r = (v_x2_u32r >> 2) + (((int32_t)p->dig_p4) << 16);
+  v_x1_u32r =
+    (((p->dig_p3 * (((v_x1_u32r >> 2) * (v_x1_u32r >> 2)) >> 13)) >> 3)
+     + ((((int32_t)p->dig_p2) * v_x1_u32r) >> 1)) >> 18;
+  v_x1_u32r = ((((32768 + v_x1_u32r)) * ((int32_t)p->dig_p1)) >> 15);
+
+  if(v_x1_u32r == 0) {
+    return; /* Avoid exception caused by division by zero */
+  }
+
+  pressure = (((uint32_t)(((int32_t)1048576) - upress) - (v_x2_u32r >> 12)))
+    * 3125;
+  if(pressure < 0x80000000) {
+    pressure = (pressure << 1) / ((uint32_t)v_x1_u32r);
+  } else {
+    pressure = (pressure / (uint32_t)v_x1_u32r) * 2;
+  }
+
+  v_x1_u32r = (((int32_t)p->dig_p9)
+               * ((int32_t)(((pressure >> 3) * (pressure >> 3)) >> 13))) >> 12;
+  v_x2_u32r = (((int32_t)(pressure >> 2)) * ((int32_t)p->dig_p8)) >> 13;
+  pressure = (uint32_t)((int32_t)pressure
+                        + ((v_x1_u32r + v_x2_u32r + p->dig_p7) >> 4));
+
+  *press = pressure;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Returns a reading from the sensor
+ * \param BMP_280_SENSOR_TYPE_TEMP or BMP_280_SENSOR_TYPE_PRESS
+ * \return Temperature (centi degrees C) or Pressure (Pascal).
+ */
+static int
+value(int type)
+{
+  int rv;
+  int32_t temp = 0;
+  uint32_t pres = 0;
+
+  if(enabled != SENSOR_STATUS_READY) {
+    PRINTF("Sensor disabled or starting up (%d)\n", enabled);
+    return CC26XX_SENSOR_READING_ERROR;
+  }
+
+  if((type != BMP_280_SENSOR_TYPE_TEMP) && type != BMP_280_SENSOR_TYPE_PRESS) {
+    PRINTF("Invalid type\n");
+    return CC26XX_SENSOR_READING_ERROR;
+  } else {
+    memset(sensor_value, 0, SENSOR_DATA_BUF_SIZE);
+
+    rv = read_data(sensor_value);
+
+    if(rv == 0) {
+      return CC26XX_SENSOR_READING_ERROR;
+    }
+
+    PRINTF("val: %02x%02x%02x %02x%02x%02x\n",
+           sensor_value[0], sensor_value[1], sensor_value[2],
+           sensor_value[3], sensor_value[4], sensor_value[5]);
+
+    convert(sensor_value, &temp, &pres);
+
+    if(type == BMP_280_SENSOR_TYPE_TEMP) {
+      rv = (int)temp;
+    } else if(type == BMP_280_SENSOR_TYPE_PRESS) {
+      rv = (int)pres;
+    }
+  }
+  return rv;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Configuration function for the BMP280 sensor.
+ *
+ * \param type Activate, enable or disable the sensor. See below
+ * \param enable
+ *
+ * When type == SENSORS_HW_INIT we turn on the hardware
+ * When type == SENSORS_ACTIVE and enable==1 we enable the sensor
+ * When type == SENSORS_ACTIVE and enable==0 we disable the sensor
+ */
+static int
+configure(int type, int enable)
+{
+  switch(type) {
+  case SENSORS_HW_INIT:
+    enabled = SENSOR_STATUS_INITIALISED;
+    init();
+    break;
+  case SENSORS_ACTIVE:
+    /* Must be initialised first */
+    if(enabled == SENSOR_STATUS_DISABLED) {
+      return SENSOR_STATUS_DISABLED;
+    }
+    if(enable) {
+      enable_sensor(1);
+      ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
+      enabled = SENSOR_STATUS_NOT_READY;
+    } else {
+      ctimer_stop(&startup_timer);
+      enable_sensor(0);
+      enabled = SENSOR_STATUS_INITIALISED;
+    }
+    break;
+  default:
+    break;
+  }
+  return enabled;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Returns the status of the sensor
+ * \param type SENSORS_ACTIVE or SENSORS_READY
+ * \return 1 if the sensor is enabled
+ */
+static int
+status(int type)
+{
+  switch(type) {
+  case SENSORS_ACTIVE:
+  case SENSORS_READY:
+    return enabled;
+    break;
+  default:
+    break;
+  }
+  return SENSOR_STATUS_DISABLED;
+}
+/*---------------------------------------------------------------------------*/
+SENSORS_SENSOR(bmp_280_sensor, "BMP280", value, configure, status);
+/*---------------------------------------------------------------------------*/
+/** @} */

platform/srf06-cc26xx/sensortag/bmp-280-sensor.h

@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-peripherals
+ * @{
+ *
+ * \defgroup sensortag-cc26xx-bmp-sensor SensorTag 2.0 Pressure Sensor
+ *
+ * Due to the time required for the sensor to startup, this driver is meant to
+ * be used in an asynchronous fashion. The caller must first activate the
+ * sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
+ * sequence, but the call will not wait for it to complete so that the CPU can
+ * perform other tasks or drop to a low power mode.
+ *
+ * Once the sensor is stable, the driver will generate a sensors_changed event.
+ *
+ * Once a reading has been taken, the caller has two options:
+ * - Turn the sensor off by calling SENSORS_DEACTIVATE, but in order to take
+ *   subsequent readings SENSORS_ACTIVATE must be called again
+ * - Leave the sensor on. In this scenario, the caller can simply keep calling
+ *   value() for subsequent readings, but having the sensor on will consume
+ *   energy
+ * @{
+ *
+ * \file
+ * Header file for the Sensortag-CC26xx BMP280 Altimeter / Pressure Sensor
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BMP_280_SENSOR_H_
+#define BMP_280_SENSOR_H_
+/*---------------------------------------------------------------------------*/
+#define BMP_280_SENSOR_TYPE_TEMP    1
+#define BMP_280_SENSOR_TYPE_PRESS   2
+/*---------------------------------------------------------------------------*/
+extern const struct sensors_sensor bmp_280_sensor;
+/*---------------------------------------------------------------------------*/
+#endif /* BMP_280_SENSOR_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

platform/srf06-cc26xx/sensortag/board-i2c.c

@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-i2c
+ * @{
+ *
+ * \file
+ * Board-specific I2C driver for the Sensortag-CC26xx
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "ti-lib.h"
+#include "board-i2c.h"
+/*---------------------------------------------------------------------------*/
+static uint8_t slave_addr = 0x00;
+static uint8_t interface = 0xFF;
+/*---------------------------------------------------------------------------*/
+static bool
+i2c_status()
+{
+  uint32_t status;
+
+  status = ti_lib_i2c_master_err(I2C0_BASE);
+  if(status & (I2C_MSTAT_DATACK_N_M | I2C_MSTAT_ADRACK_N_M)) {
+    ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_ERROR_STOP);
+  }
+
+  return status == I2C_MASTER_ERR_NONE;
+}
+/*---------------------------------------------------------------------------*/
+void
+board_i2c_init()
+{
+  /* The I2C peripheral must be enabled */
+  ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_I2C0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* Reset the I2C controller */
+  HWREG(PRCM_BASE + PRCM_O_RESETI2C) = PRCM_RESETI2C_I2C;
+
+  /* Enable and initialize the I2C master module */
+  ti_lib_i2c_master_init_exp_clk(I2C0_BASE,
+                                 ti_lib_sys_ctrl_peripheral_clock_get(
+                                   PRCM_PERIPH_I2C0, SYSCTRL_SYSBUS_ON),
+                                 true);
+}
+/*---------------------------------------------------------------------------*/
+bool
+board_i2c_write(uint8_t *data, uint8_t len)
+{
+  uint32_t i;
+  bool success;
+
+  /* Write slave address */
+  ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
+
+  /* Write first byte */
+  ti_lib_i2c_master_data_put(I2C0_BASE, data[0]);
+
+  /* Check if another master has access */
+  while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+
+  /* Assert RUN + START */
+  ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
+  while(ti_lib_i2c_master_busy(I2C0_BASE));
+  success = i2c_status();
+
+  for(i = 1; i < len && success; i++) {
+    /* Write next byte */
+    ti_lib_i2c_master_data_put(I2C0_BASE, data[i]);
+    if(i < len - 1) {
+      /* Clear START */
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
+      while(ti_lib_i2c_master_busy(I2C0_BASE));
+      success = i2c_status();
+    }
+  }
+
+  /* Assert stop */
+  if(success) {
+    /* Assert STOP */
+    ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_FINISH);
+    while(ti_lib_i2c_master_busy(I2C0_BASE));
+    success = i2c_status();
+    while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+  }
+
+  return success;
+}
+/*---------------------------------------------------------------------------*/
+bool
+board_i2c_write_single(uint8_t data)
+{
+  bool success;
+
+  /* Write slave address */
+  ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
+
+  /* Write first byte */
+  ti_lib_i2c_master_data_put(I2C0_BASE, data);
+
+  /* Check if another master has access */
+  while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+
+  /* Assert RUN + START + STOP */
+  ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_SINGLE_SEND);
+  while(ti_lib_i2c_master_busy(I2C0_BASE));
+  success = i2c_status();
+
+  return success;
+}
+/*---------------------------------------------------------------------------*/
+bool
+board_i2c_read(uint8_t *data, uint8_t len)
+{
+  uint8_t i;
+  bool success;
+
+  /* Set slave address */
+  ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
+
+  /* Check if another master has access */
+  while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+
+  /* Assert RUN + START + ACK */
+  ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
+
+  i = 0;
+  success = true;
+  while(i < (len - 1) && success) {
+    while(ti_lib_i2c_master_busy(I2C0_BASE));
+    success = i2c_status();
+    if(success) {
+      data[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
+      i++;
+    }
+  }
+
+  if(success) {
+    while(ti_lib_i2c_master_busy(I2C0_BASE));
+    success = i2c_status();
+    if(success) {
+      data[len - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
+      while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+    }
+  }
+
+  return success;
+}
+/*---------------------------------------------------------------------------*/
+bool
+board_i2c_write_read(uint8_t *wdata, uint8_t wlen, uint8_t *rdata, uint8_t rlen)
+{
+  uint32_t i;
+  bool success;
+
+  /* Set slave address for write */
+  ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, false);
+
+  /* Write first byte */
+  ti_lib_i2c_master_data_put(I2C0_BASE, wdata[0]);
+
+  /* Check if another master has access */
+  while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+
+  /* Assert RUN + START */
+  ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_START);
+  while(ti_lib_i2c_master_busy(I2C0_BASE));
+  success = i2c_status();
+
+  for(i = 1; i < wlen && success; i++) {
+    /* Write next byte */
+    ti_lib_i2c_master_data_put(I2C0_BASE, wdata[i]);
+    if(i < wlen - 1) {
+      /* Clear START */
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_SEND_CONT);
+      while(ti_lib_i2c_master_busy(I2C0_BASE));
+      success = i2c_status();
+    }
+  }
+  if(!success) {
+    return false;
+  }
+
+  /* Set slave address for read */
+  ti_lib_i2c_master_slave_addr_set(I2C0_BASE, slave_addr, true);
+
+  /* Assert ACK */
+  ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_START);
+
+  i = 0;
+  while(i < (rlen - 1) && success) {
+    while(ti_lib_i2c_master_busy(I2C0_BASE));
+    success = i2c_status();
+    if(success) {
+      rdata[i] = ti_lib_i2c_master_data_get(I2C0_BASE);
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_CONT);
+      i++;
+    }
+  }
+
+  if(success) {
+    while(ti_lib_i2c_master_busy(I2C0_BASE));
+    success = i2c_status();
+    if(success) {
+      rdata[rlen - 1] = ti_lib_i2c_master_data_get(I2C0_BASE);
+      ti_lib_i2c_master_control(I2C0_BASE, I2C_MASTER_CMD_BURST_RECEIVE_FINISH);
+      while(ti_lib_i2c_master_bus_busy(I2C0_BASE));
+    }
+  }
+
+  return success;
+}
+/*---------------------------------------------------------------------------*/
+void
+board_i2c_select(uint8_t new_interface, uint8_t address)
+{
+  slave_addr = address;
+
+  if(new_interface != interface) {
+    interface = new_interface;
+    if(interface == BOARD_I2C_INTERFACE_0) {
+      ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA, IOC_NO_IOPULL);
+      ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL, IOC_NO_IOPULL);
+      ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA, BOARD_IOID_SCL);
+      ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA_HP);
+      ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL_HP);
+    } else if(interface == BOARD_I2C_INTERFACE_1) {
+      ti_lib_ioc_io_port_pull_set(BOARD_IOID_SDA_HP, IOC_NO_IOPULL);
+      ti_lib_ioc_io_port_pull_set(BOARD_IOID_SCL_HP, IOC_NO_IOPULL);
+      ti_lib_ioc_pin_type_i2c(I2C0_BASE, BOARD_IOID_SDA_HP, BOARD_IOID_SCL_HP);
+      ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SDA);
+      ti_lib_ioc_pin_type_gpio_input(BOARD_IOID_SCL);
+    }
+  }
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

platform/srf06-cc26xx/sensortag/board-i2c.h

@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-peripherals
+ * @{
+ *
+ * \defgroup sensortag-cc26xx-i2c SensorTag 2.0 I2C functions
+ * @{
+ *
+ * \file
+ * Header file for the Sensortag-CC26xx I2C Driver
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BOARD_I2C_H_
+#define BOARD_I2C_H_
+/*---------------------------------------------------------------------------*/
+#include <stdint.h>
+#include <stdbool.h>
+/*---------------------------------------------------------------------------*/
+#define BOARD_I2C_INTERFACE_0     0
+#define BOARD_I2C_INTERFACE_1     1
+/*---------------------------------------------------------------------------*/
+#define board_i2c_deselect(...)
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initialise the I2C controller with defaults for the sensortag
+ */
+void board_i2c_init(void);
+
+/**
+ * \brief Select an I2C slave
+ * \param interface The I2C interface to be used (BOARD_I2C_INTERFACE_0 or _1)
+ * \param slave_addr The slave's address
+ *
+ * The various sensors on the sensortag are connected either on interface 0 or
+ * 1. All sensors are connected to interface 0, with the exception of the MPU
+ * that is connected to 1.
+ */
+void board_i2c_select(uint8_t interface, uint8_t slave_addr);
+
+/**
+ * \brief Burst read from an I2C device
+ * \param buf Pointer to a buffer where the read data will be stored
+ * \param len Number of bytes to read
+ * \return True on success
+ */
+bool board_i2c_read(uint8_t *buf, uint8_t len);
+
+/**
+ * \brief Burst write to an I2C device
+ * \param buf Pointer to the buffer to be written
+ * \param len Number of bytes to write
+ * \return True on success
+ */
+bool board_i2c_write(uint8_t *buf, uint8_t len);
+
+/**
+ * \brief Single write to an I2C device
+ * \param data The byte to write
+ * \return True on success
+ */
+bool board_i2c_write_single(uint8_t data);
+
+/**
+ * \brief Write and read in one operation
+ * \param wdata Pointer to the buffer to be written
+ * \param wlen Number of bytes to write
+ * \param rdata Pointer to a buffer where the read data will be stored
+ * \param rlen Number of bytes to read
+ * \return True on success
+ */
+bool board_i2c_write_read(uint8_t *wdata, uint8_t wlen, uint8_t *rdata,
+                          uint8_t rlen);
+/*---------------------------------------------------------------------------*/
+#endif /* BOARD_I2C_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

platform/srf06-cc26xx/sensortag/board-peripherals.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/** \addtogroup cc26xx-srf-tag
+ * @{
+ *
+ * \file
+ * Header file with definitions related to the sensors on the Sensortag-CC26xx
+ *
+ * \note   Do not include this file directly.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BOARD_PERIPHERALS_H_
+#define BOARD_PERIPHERALS_H_
+/*---------------------------------------------------------------------------*/
+#include "bmp-280-sensor.h"
+#include "tmp-007-sensor.h"
+#include "opt-3001-sensor.h"
+#include "sht-21-sensor.h"
+#include "mpu-9250-sensor.h"
+#include "reed-relay.h"
+#include "buzzer.h"
+#include "ext-flash.h"
+/*---------------------------------------------------------------------------*/
+#endif /* BOARD_PERIPHERALS_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ */

platform/srf06-cc26xx/sensortag/board-spi.c

@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-spi
+ * @{
+ *
+ * \file
+ * Board-specific SPI driver for the Sensortag-CC26xx
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki.h"
+#include "ti-lib.h"
+#include "board-spi.h"
+#include "board.h"
+/*---------------------------------------------------------------------------*/
+#define CPU_FREQ      48000000ul
+/*---------------------------------------------------------------------------*/
+int
+board_spi_write(const uint8_t *buf, size_t len)
+{
+  while(len > 0) {
+    uint32_t ul;
+
+    ti_lib_ssi_data_put(SSI0_BASE, *buf);
+    ti_lib_rom_ssi_data_get(SSI0_BASE, &ul);
+    len--;
+    buf++;
+  }
+
+  return 0;
+}
+/*---------------------------------------------------------------------------*/
+int
+board_spi_read(uint8_t *buf, size_t len)
+{
+  while(len > 0) {
+    uint32_t ul;
+
+    if(!ti_lib_rom_ssi_data_put_non_blocking(SSI0_BASE, 0)) {
+      /* Error */
+      return -1;
+    }
+    ti_lib_rom_ssi_data_get(SSI0_BASE, &ul);
+    *buf = (uint8_t)ul;
+    len--;
+    buf++;
+  }
+  return 0;
+}
+/*---------------------------------------------------------------------------*/
+void
+board_spi_flush()
+{
+  uint32_t ul;
+  while(ti_lib_rom_ssi_data_get_non_blocking(SSI0_BASE, &ul));
+}
+/*---------------------------------------------------------------------------*/
+void
+board_spi_open(uint32_t bit_rate, uint32_t clk_pin)
+{
+  uint32_t buf;
+
+  /* SPI power */
+  ti_lib_rom_prcm_peripheral_run_enable(PRCM_PERIPH_SSI0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* SPI configuration */
+  ti_lib_ssi_int_disable(SSI0_BASE, SSI_RXOR | SSI_RXFF | SSI_RXTO | SSI_TXFF);
+  ti_lib_ssi_int_clear(SSI0_BASE, SSI_RXOR | SSI_RXTO);
+  ti_lib_rom_ssi_config_set_exp_clk(SSI0_BASE, CPU_FREQ, SSI_FRF_MOTO_MODE_0,
+                                    SSI_MODE_MASTER, bit_rate, 8);
+  ti_lib_rom_ioc_pin_type_ssi_master(SSI0_BASE, BOARD_IOID_SPI_MISO,
+                                     BOARD_IOID_SPI_MOSI, IOID_UNUSED, clk_pin);
+  ti_lib_ssi_enable(SSI0_BASE);
+
+  /* Get rid of residual data from SSI port */
+  while(ti_lib_ssi_data_get_non_blocking(SSI0_BASE, &buf));
+}
+/*---------------------------------------------------------------------------*/
+void
+board_spi_close()
+{
+  /* Power down SSI0 */
+  ti_lib_rom_prcm_peripheral_run_disable(PRCM_PERIPH_SSI0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

platform/srf06-cc26xx/sensortag/board-spi.h

@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-peripherals
+ * @{
+ *
+ * \defgroup sensortag-cc26xx-spi SensorTag 2.0 SPI functions
+ * @{
+ *
+ * \file
+ * Header file for the Sensortag-CC26xx SPI Driver
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BOARD_SPI_H_
+#define BOARD_SPI_H_
+/*---------------------------------------------------------------------------*/
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdbool.h>
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Initialize the SPI interface
+ * \param bit_rate The bit rate to use
+ * \param clk_pin The IOID for the clock pin. This can be IOID_0 etc
+ * \return none
+ */
+void board_spi_open(uint32_t bit_rate, uint32_t clk_pin);
+
+/**
+ * \brief Close the SPI interface
+ * \return True when successful.
+ */
+void board_spi_close(void);
+
+/**
+ * \brief Clear data from the SPI interface
+ * \return none
+ */
+void board_spi_flush(void);
+
+/**
+ * \brief Read from an SPI device
+ * \param buf The buffer to store data
+ * \param length The number of bytes to read
+ * \return True when successful.
+ */
+int board_spi_read(uint8_t *buf, size_t length);
+
+/**
+ * \brief Write to an SPI device
+ * \param buf The buffer with the data to write
+ * \param length The number of bytes to write
+ * \return True when successful.
+ */
+int board_spi_write(const uint8_t *buf, size_t length);
+/*---------------------------------------------------------------------------*/
+#endif /* BOARD_SPI_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */

platform/srf06-cc26xx/sensortag/board.c

@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup sensortag-cc26xx-peripherals
+ * @{
+ *
+ * \file
+ *  Sensortag-specific board initialisation driver
+ */
+/*---------------------------------------------------------------------------*/
+#include "contiki-conf.h"
+#include "lib/sensors.h"
+#include "buzzer.h"
+#include "lpm.h"
+#include "ti-lib.h"
+#include "board-peripherals.h"
+#include "board-i2c.h"
+
+#include <stdint.h>
+#include <string.h>
+/*---------------------------------------------------------------------------*/
+#define PRCM_DOMAINS (PRCM_DOMAIN_SERIAL | PRCM_DOMAIN_PERIPH)
+/*---------------------------------------------------------------------------*/
+static void
+power_domains_on(void)
+{
+  /* Turn on relevant power domains */
+  ti_lib_prcm_power_domain_on(PRCM_DOMAINS);
+
+  /* Wait for domains to power on */
+  while((ti_lib_prcm_power_domain_status(PRCM_DOMAINS)
+        != PRCM_DOMAIN_POWER_ON));
+}
+/*---------------------------------------------------------------------------*/
+static void
+lpm_wakeup_handler(void)
+{
+  power_domains_on();
+
+  board_i2c_init();
+}
+/*---------------------------------------------------------------------------*/
+static void
+shutdown_handler(uint8_t mode)
+{
+  if(mode == LPM_MODE_SHUTDOWN) {
+    buzzer_stop();
+    SENSORS_DEACTIVATE(bmp_280_sensor);
+    SENSORS_DEACTIVATE(opt_3001_sensor);
+    SENSORS_DEACTIVATE(tmp_007_sensor);
+    SENSORS_DEACTIVATE(sht_21_sensor);
+    mpu_9250_sensor.configure(MPU_9250_SENSOR_SHUTDOWN, 0);
+  }
+}
+/*---------------------------------------------------------------------------*/
+/*
+ * Declare a data structure to register with LPM.
+ * We don't care about what power mode we'll drop to, we don't care about
+ * getting notified before deep sleep. All we need is to be notified when we
+ * wake up so we can turn power domains back on for I2C and SSI, and to make
+ * sure everything on the board is off before CM3 shutdown.
+ */
+LPM_MODULE(sensortag_module, NULL, shutdown_handler, lpm_wakeup_handler);
+/*---------------------------------------------------------------------------*/
+void
+board_init()
+{
+  /* Disable global interrupts */
+  uint8_t int_disabled = ti_lib_int_master_disable();
+
+  power_domains_on();
+
+  /* Configure all clock domains to run at full speed */
+  ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_SYSBUS, PRCM_CLOCK_DIV_1);
+  ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_CPU, PRCM_CLOCK_DIV_1);
+  ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_TIMER, PRCM_CLOCK_DIV_1);
+  ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_SERIAL, PRCM_CLOCK_DIV_1);
+  ti_lib_prcm_clock_configure_set(PRCM_DOMAIN_PERIPH, PRCM_CLOCK_DIV_1);
+
+  /* Enable GPIO peripheral */
+  ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_GPIO);
+
+  /* Apply settings and wait for them to take effect */
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* Enable GPT0 module - Wait for the clock to be enabled */
+  ti_lib_prcm_peripheral_run_enable(PRCM_PERIPH_TIMER0);
+  ti_lib_prcm_load_set();
+  while(!ti_lib_prcm_load_get());
+
+  /* Keys (input pullup) */
+  ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_KEY_LEFT);
+  ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_KEY_RIGHT);
+  ti_lib_ioc_io_port_pull_set(BOARD_IOID_KEY_LEFT, IOC_IOPULL_UP);
+  ti_lib_ioc_io_port_pull_set(BOARD_IOID_KEY_RIGHT, IOC_IOPULL_UP);
+
+  /* I2C controller */
+  board_i2c_init();
+
+  /* Sensor interface */
+  ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_MPU_INT);
+  ti_lib_ioc_io_port_pull_set(BOARD_IOID_MPU_INT, IOC_IOPULL_DOWN);
+
+  ti_lib_rom_ioc_pin_type_gpio_input(BOARD_IOID_REED_RELAY);
+  ti_lib_ioc_io_port_pull_set(BOARD_IOID_REED_RELAY, IOC_IOPULL_DOWN);
+
+  ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_MPU_POWER);
+
+  /* Flash interface */
+  ti_lib_rom_ioc_pin_type_gpio_output(BOARD_IOID_FLASH_CS);
+  ti_lib_gpio_pin_write(BOARD_FLASH_CS, 1);
+
+  buzzer_init();
+
+  lpm_register_module(&sensortag_module);
+
+  /* Re-enable interrupt if initially enabled. */
+  if(!int_disabled) {
+    ti_lib_int_master_enable();
+  }
+}
+/*---------------------------------------------------------------------------*/
+/** @} */

platform/srf06-cc26xx/sensortag/board.h

@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*---------------------------------------------------------------------------*/
+/** \addtogroup cc26xx-srf-tag
+ * @{
+ *
+ * \defgroup sensortag-cc26xx-peripherals Sensortag Peripherals
+ *
+ * Defines related to the Sensortag-CC26XX
+ *
+ * This file provides connectivity information on LEDs, Buttons, UART and
+ * other peripherals
+ *
+ * This file can be used as the basis to configure other boards using the
+ * CC26XX code as their basis.
+ *
+ * This file is not meant to be modified by the user.
+ * @{
+ *
+ * \file
+ * Header file with definitions related to the I/O connections on the TI
+ * Sensortag
+ *
+ * \note   Do not include this file directly. It gets included by contiki-conf
+ *         after all relevant directives have been set.
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef BOARD_H_
+#define BOARD_H_
+/*---------------------------------------------------------------------------*/
+#include "ioc.h"
+/*---------------------------------------------------------------------------*/
+/**
+ * \name LED configurations
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+/* Some files include leds.h before us, so we need to get rid of defaults in
+ * leds.h before we provide correct definitions */
+#undef LEDS_GREEN
+#undef LEDS_YELLOW
+#undef LEDS_RED
+#undef LEDS_CONF_ALL
+
+#define LEDS_RED       1
+#define LEDS_GREEN     2
+#define LEDS_YELLOW    LEDS_GREEN
+#define LEDS_ORANGE    LEDS_RED
+
+#define LEDS_CONF_ALL  3
+
+/* Notify various examples that we have LEDs */
+#define PLATFORM_HAS_LEDS        1
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name LED IOID mappings
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_LED_1          IOID_10
+#define BOARD_IOID_LED_2          IOID_15
+#define BOARD_LED_1               (1 << BOARD_IOID_LED_1)
+#define BOARD_LED_2               (1 << BOARD_IOID_LED_2)
+#define BOARD_LED_ALL             (BOARD_LED_1 | BOARD_LED_2)
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name UART IOID mapping
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_UART_RX        IOID_17
+#define BOARD_IOID_UART_TX        IOID_16
+#define BOARD_IOID_UART_CTS       IOID_UNUSED
+#define BOARD_IOID_UART_RTS       IOID_UNUSED
+#define BOARD_UART_RXD            (1 << BOARD_IOID_UART_RXD)
+#define BOARD_UART_TXD            (1 << BOARD_IOID_UART_TXD)
+#define BOARD_UART_CTS            (1 << BOARD_IOID_UART_CTS)
+#define BOARD_UART_RTS            (1 << BOARD_IOID_UART_RTS)
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Button IOID mapping
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_KEY_LEFT       IOID_0
+#define BOARD_IOID_KEY_RIGHT      IOID_4
+#define BOARD_KEY_LEFT            (1 << BOARD_IOID_KEY_LEFT)
+#define BOARD_KEY_RIGHT           (1 << BOARD_IOID_KEY_RIGHT)
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief SPI IOID mappings
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_SPI_MOSI       IOID_19
+#define BOARD_IOID_SPI_MISO       IOID_18
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Buzzer configuration
+ * @{
+ */
+#define BOARD_IOID_BUZZER         IOID_21 /**< Buzzer Pin */
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Reed Relay IOID mapping
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_REED_RELAY     IOID_3
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name External flash IOID mapping
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_FLASH_CS       IOID_14
+#define BOARD_FLASH_CS            (1 << BOARD_IOID_FLASH_CS)
+#define BOARD_SPI_CLK_FLASH       IOID_11
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief I2C IOID mappings
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_SDA            IOID_5 /**< Interface 0 SDA: All sensors bar MPU */
+#define BOARD_IOID_SCL            IOID_6 /**< Interface 0 SCL: All sensors bar MPU */
+#define BOARD_IOID_SDA_HP         IOID_8 /**< Interface 1 SDA: MPU */
+#define BOARD_IOID_SCL_HP         IOID_9 /**< Interface 1 SCL: MPU */
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief MPU IOID mappings
+ *
+ * Those values are not meant to be modified by the user
+ * @{
+ */
+#define BOARD_IOID_MPU_INT        IOID_7
+#define BOARD_IOID_MPU_POWER      IOID_12
+#define BOARD_MPU_INT             (1 << BOARD_IOID_MPU_INT)
+#define BOARD_MPU_POWER           (1 << BOARD_IOID_MPU_POWER)
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \name Device string used on startup
+ * @{
+ */
+#define BOARD_STRING "TI CC2650 SensorTag"
+
+/** @} */
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Board specific iniatialisation
+ * @{
+ */
+void board_init(void);
+/** @} */
+/*---------------------------------------------------------------------------*/
+#endif /* BOARD_H_ */
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */