Added platform configuration files with resource definitions for the JCreate and Sentilla USB platforms
This commit is contained in:
Niclas Finne
parent
1d07330ac0
commit
4b26f92e04
|
|
@ -1,7 +1,8 @@
|
||||||
# $Id: Makefile.jcreate,v 1.3 2010/08/25 19:34:42 nifi Exp $
|
# Use custom platform configuration
|
||||||
|
CFLAGS += -DPLATFORM_CONF_H=\"platform-jcreate-conf.h\"
|
||||||
|
|
||||||
# Some drivers such as ds2411.c only compile under platform sky
|
# Some drivers such as ds2411.c only compile under platform sky
|
||||||
CFLAGS += -DCONTIKI_TARGET_SKY -DLEDS_CONF_ALL=255
|
CFLAGS += -DCONTIKI_TARGET_SKY
|
||||||
|
|
||||||
CONTIKI_TARGET_SOURCEFILES += contiki-jcreate-platform.c \
|
CONTIKI_TARGET_SOURCEFILES += contiki-jcreate-platform.c \
|
||||||
battery-sensor.c radio-sensor.c \
|
battery-sensor.c radio-sensor.c \
|
||||||
|
|
|
||||||
212
platform/jcreate/platform-jcreate-conf.h
Normal file
212
platform/jcreate/platform-jcreate-conf.h
Normal file
|
|
@ -0,0 +1,212 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2011, Swedish Institute of Computer Science.
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \file
|
||||||
|
* Platform configuration for the Sentilla JCreate
|
||||||
|
* \author
|
||||||
|
* Niclas Finne <nfi@sics.se>
|
||||||
|
* Joakim Eriksson <joakime@sics.se>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __PLATFORM_CONF_H__
|
||||||
|
#define __PLATFORM_CONF_H__
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Definitions below are dictated by the hardware and not really
|
||||||
|
* changeable!
|
||||||
|
*/
|
||||||
|
/* Platform TMOTE_SKY */
|
||||||
|
#define TMOTE_SKY 1
|
||||||
|
|
||||||
|
#define LEDS_CONF_ALL 255
|
||||||
|
#define PLATFORM_HAS_LEDS 1
|
||||||
|
#define PLATFORM_HAS_BUTTON 0
|
||||||
|
|
||||||
|
/* CPU target speed in Hz */
|
||||||
|
#define F_CPU 3900000uL /*2457600uL*/
|
||||||
|
|
||||||
|
/* Our clock resolution, this is the same as Unix HZ. */
|
||||||
|
#define CLOCK_CONF_SECOND 128UL
|
||||||
|
|
||||||
|
#define BAUD2UBR(baud) ((F_CPU/baud))
|
||||||
|
|
||||||
|
#define CCIF
|
||||||
|
#define CLIF
|
||||||
|
|
||||||
|
#define CC_CONF_INLINE inline
|
||||||
|
|
||||||
|
#define HAVE_STDINT_H
|
||||||
|
#define MSP430_MEMCPY_WORKAROUND 1
|
||||||
|
#include "msp430def.h"
|
||||||
|
|
||||||
|
|
||||||
|
/* Types for clocks and uip_stats */
|
||||||
|
typedef unsigned short uip_stats_t;
|
||||||
|
typedef unsigned long clock_time_t;
|
||||||
|
typedef unsigned long off_t;
|
||||||
|
|
||||||
|
/* the low-level radio driver */
|
||||||
|
#define NETSTACK_CONF_RADIO cc2420_driver
|
||||||
|
|
||||||
|
/* LED ports */
|
||||||
|
#define LEDS_PxDIR P5DIR
|
||||||
|
#define LEDS_PxOUT P5OUT
|
||||||
|
#define LEDS_CONF_RED 0x10
|
||||||
|
#define LEDS_CONF_GREEN 0x20
|
||||||
|
#define LEDS_CONF_YELLOW 0x40
|
||||||
|
|
||||||
|
/* DCO speed resynchronization for more robust UART, etc. */
|
||||||
|
#ifndef DCOSYNCH_CONF_ENABLED
|
||||||
|
#define DCOSYNCH_CONF_ENABLED 1
|
||||||
|
#endif /* DCOSYNCH_CONF_ENABLED */
|
||||||
|
#ifndef DCOSYNCH_CONF_PERIOD
|
||||||
|
#define DCOSYNCH_CONF_PERIOD 30
|
||||||
|
#endif /* DCOSYNCH_CONF_PERIOD */
|
||||||
|
|
||||||
|
#define ROM_ERASE_UNIT_SIZE 512
|
||||||
|
#define XMEM_ERASE_UNIT_SIZE (64*1024L)
|
||||||
|
|
||||||
|
|
||||||
|
#define CFS_CONF_OFFSET_TYPE long
|
||||||
|
|
||||||
|
|
||||||
|
/* Use the first 64k of external flash for node configuration */
|
||||||
|
#define NODE_ID_XMEM_OFFSET (0 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
/* Use the second 64k of external flash for codeprop. */
|
||||||
|
#define EEPROMFS_ADDR_CODEPROP (1 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
#define CFS_XMEM_CONF_OFFSET (2 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
#define CFS_XMEM_CONF_SIZE (1 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
#define CFS_RAM_CONF_SIZE 4096
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus configuration for the TMote Sky.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* SPI input/output registers. */
|
||||||
|
#define SPI_TXBUF U0TXBUF
|
||||||
|
#define SPI_RXBUF U0RXBUF
|
||||||
|
|
||||||
|
/* USART0 Tx ready? */
|
||||||
|
#define SPI_WAITFOREOTx() while ((U0TCTL & TXEPT) == 0)
|
||||||
|
/* USART0 Rx ready? */
|
||||||
|
#define SPI_WAITFOREORx() while ((IFG1 & URXIFG0) == 0)
|
||||||
|
/* USART0 Tx buffer ready? */
|
||||||
|
#define SPI_WAITFORTxREADY() while ((IFG1 & UTXIFG0) == 0)
|
||||||
|
|
||||||
|
#define SCK 1 /* P3.1 - Output: SPI Serial Clock (SCLK) */
|
||||||
|
#define MOSI 2 /* P3.2 - Output: SPI Master out - slave in (MOSI) */
|
||||||
|
#define MISO 3 /* P3.3 - Input: SPI Master in - slave out (MISO) */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus - M25P80 external flash configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define FLASH_PWR 3 /* P4.3 Output */
|
||||||
|
#define FLASH_CS 4 /* P4.4 Output */
|
||||||
|
#define FLASH_HOLD 7 /* P4.7 Output */
|
||||||
|
|
||||||
|
/* Enable/disable flash access to the SPI bus (active low). */
|
||||||
|
|
||||||
|
#define SPI_FLASH_ENABLE() ( P4OUT &= ~BV(FLASH_CS) )
|
||||||
|
#define SPI_FLASH_DISABLE() ( P4OUT |= BV(FLASH_CS) )
|
||||||
|
|
||||||
|
#define SPI_FLASH_HOLD() ( P4OUT &= ~BV(FLASH_HOLD) )
|
||||||
|
#define SPI_FLASH_UNHOLD() ( P4OUT |= BV(FLASH_HOLD) )
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus - CC2420 pin configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CC2420_CONF_SYMBOL_LOOP_COUNT 800
|
||||||
|
|
||||||
|
/* P1.0 - Input: FIFOP from CC2420 */
|
||||||
|
#define CC2420_FIFOP_PORT(type) P1##type
|
||||||
|
#define CC2420_FIFOP_PIN 0
|
||||||
|
/* P1.3 - Input: FIFO from CC2420 */
|
||||||
|
#define CC2420_FIFO_PORT(type) P1##type
|
||||||
|
#define CC2420_FIFO_PIN 3
|
||||||
|
/* P1.4 - Input: CCA from CC2420 */
|
||||||
|
#define CC2420_CCA_PORT(type) P1##type
|
||||||
|
#define CC2420_CCA_PIN 4
|
||||||
|
/* P4.1 - Input: SFD from CC2420 */
|
||||||
|
#define CC2420_SFD_PORT(type) P4##type
|
||||||
|
#define CC2420_SFD_PIN 1
|
||||||
|
/* P4.2 - Output: SPI Chip Select (CS_N) */
|
||||||
|
#define CC2420_CSN_PORT(type) P4##type
|
||||||
|
#define CC2420_CSN_PIN 2
|
||||||
|
/* P4.5 - Output: VREG_EN to CC2420 */
|
||||||
|
#define CC2420_VREG_PORT(type) P4##type
|
||||||
|
#define CC2420_VREG_PIN 5
|
||||||
|
/* P4.6 - Output: RESET_N to CC2420 */
|
||||||
|
#define CC2420_RESET_PORT(type) P4##type
|
||||||
|
#define CC2420_RESET_PIN 6
|
||||||
|
|
||||||
|
#define CC2420_IRQ_VECTOR PORT1_VECTOR
|
||||||
|
|
||||||
|
/* Pin status. */
|
||||||
|
#define CC2420_FIFOP_IS_1 (!!(CC2420_FIFOP_PORT(IN) & BV(CC2420_FIFOP_PIN)))
|
||||||
|
#define CC2420_FIFO_IS_1 (!!(CC2420_FIFO_PORT(IN) & BV(CC2420_FIFO_PIN)))
|
||||||
|
#define CC2420_CCA_IS_1 (!!(CC2420_CCA_PORT(IN) & BV(CC2420_CCA_PIN)))
|
||||||
|
#define CC2420_SFD_IS_1 (!!(CC2420_SFD_PORT(IN) & BV(CC2420_SFD_PIN)))
|
||||||
|
|
||||||
|
/* The CC2420 reset pin. */
|
||||||
|
#define SET_RESET_INACTIVE() (CC2420_RESET_PORT(OUT) |= BV(CC2420_RESET_PIN))
|
||||||
|
#define SET_RESET_ACTIVE() (CC2420_RESET_PORT(OUT) &= ~BV(CC2420_RESET_PIN))
|
||||||
|
|
||||||
|
/* CC2420 voltage regulator enable pin. */
|
||||||
|
#define SET_VREG_ACTIVE() (CC2420_VREG_PORT(OUT) |= BV(CC2420_VREG_PIN))
|
||||||
|
#define SET_VREG_INACTIVE() (CC2420_VREG_PORT(OUT) &= ~BV(CC2420_VREG_PIN))
|
||||||
|
|
||||||
|
/* CC2420 rising edge trigger for external interrupt 0 (FIFOP). */
|
||||||
|
#define CC2420_FIFOP_INT_INIT() do { \
|
||||||
|
CC2420_FIFOP_PORT(IES) &= ~BV(CC2420_FIFOP_PIN); \
|
||||||
|
CC2420_CLEAR_FIFOP_INT(); \
|
||||||
|
} while(0)
|
||||||
|
|
||||||
|
/* FIFOP on external interrupt 0. */
|
||||||
|
#define CC2420_ENABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) |= BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
#define CC2420_DISABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) &= ~BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
#define CC2420_CLEAR_FIFOP_INT() do {CC2420_FIFOP_PORT(IFG) &= ~BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enables/disables CC2420 access to the SPI bus (not the bus).
|
||||||
|
* (Chip Select)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ENABLE CSn (active low) */
|
||||||
|
#define CC2420_SPI_ENABLE() (CC2420_CSN_PORT(OUT) &= ~BV(CC2420_CSN_PIN))
|
||||||
|
/* DISABLE CSn (active low) */
|
||||||
|
#define CC2420_SPI_DISABLE() (CC2420_CSN_PORT(OUT) |= BV(CC2420_CSN_PIN))
|
||||||
|
#define CC2420_SPI_IS_ENABLED() ((CC2420_CSN_PORT(OUT) & BV(CC2420_CSN_PIN)) != BV(CC2420_CSN_PIN))
|
||||||
|
|
||||||
|
#endif /* __PLATFORM_CONF_H__ */
|
||||||
|
|
@ -1,4 +1,5 @@
|
||||||
# $Id: Makefile.sentilla-usb,v 1.1 2010/08/25 19:57:33 nifi Exp $
|
# Use custom platform configuration
|
||||||
|
CFLAGS += -DPLATFORM_CONF_H=\"platform-sentilla-usb-conf.h\"
|
||||||
|
|
||||||
# Some drivers such as ds2411.c only compile under platform sky
|
# Some drivers such as ds2411.c only compile under platform sky
|
||||||
CFLAGS += -DCONTIKI_TARGET_SKY
|
CFLAGS += -DCONTIKI_TARGET_SKY
|
||||||
|
|
|
||||||
211
platform/sentilla-usb/platform-sentilla-usb-conf.h
Normal file
211
platform/sentilla-usb/platform-sentilla-usb-conf.h
Normal file
|
|
@ -0,0 +1,211 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2011, Swedish Institute of Computer Science.
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in the
|
||||||
|
* documentation and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
* SUCH DAMAGE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* \file
|
||||||
|
* Platform configuration for the Sentilla USB
|
||||||
|
* \author
|
||||||
|
* Niclas Finne <nfi@sics.se>
|
||||||
|
* Joakim Eriksson <joakime@sics.se>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __PLATFORM_CONF_H__
|
||||||
|
#define __PLATFORM_CONF_H__
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Definitions below are dictated by the hardware and not really
|
||||||
|
* changeable!
|
||||||
|
*/
|
||||||
|
/* Platform TMOTE_SKY */
|
||||||
|
#define TMOTE_SKY 1
|
||||||
|
|
||||||
|
#define PLATFORM_HAS_LEDS 1
|
||||||
|
#define PLATFORM_HAS_BUTTON 0
|
||||||
|
|
||||||
|
/* CPU target speed in Hz */
|
||||||
|
#define F_CPU 3900000uL /*2457600uL*/
|
||||||
|
|
||||||
|
/* Our clock resolution, this is the same as Unix HZ. */
|
||||||
|
#define CLOCK_CONF_SECOND 128UL
|
||||||
|
|
||||||
|
#define BAUD2UBR(baud) ((F_CPU/baud))
|
||||||
|
|
||||||
|
#define CCIF
|
||||||
|
#define CLIF
|
||||||
|
|
||||||
|
#define CC_CONF_INLINE inline
|
||||||
|
|
||||||
|
#define HAVE_STDINT_H
|
||||||
|
#define MSP430_MEMCPY_WORKAROUND 1
|
||||||
|
#include "msp430def.h"
|
||||||
|
|
||||||
|
|
||||||
|
/* Types for clocks and uip_stats */
|
||||||
|
typedef unsigned short uip_stats_t;
|
||||||
|
typedef unsigned long clock_time_t;
|
||||||
|
typedef unsigned long off_t;
|
||||||
|
|
||||||
|
/* the low-level radio driver */
|
||||||
|
#define NETSTACK_CONF_RADIO cc2420_driver
|
||||||
|
|
||||||
|
/* LED ports */
|
||||||
|
#define LEDS_PxDIR P5DIR
|
||||||
|
#define LEDS_PxOUT P5OUT
|
||||||
|
#define LEDS_CONF_RED 0x10
|
||||||
|
#define LEDS_CONF_GREEN 0x20
|
||||||
|
#define LEDS_CONF_YELLOW 0x40
|
||||||
|
|
||||||
|
/* DCO speed resynchronization for more robust UART, etc. */
|
||||||
|
#ifndef DCOSYNCH_CONF_ENABLED
|
||||||
|
#define DCOSYNCH_CONF_ENABLED 1
|
||||||
|
#endif /* DCOSYNCH_CONF_ENABLED */
|
||||||
|
#ifndef DCOSYNCH_CONF_PERIOD
|
||||||
|
#define DCOSYNCH_CONF_PERIOD 30
|
||||||
|
#endif /* DCOSYNCH_CONF_PERIOD */
|
||||||
|
|
||||||
|
#define ROM_ERASE_UNIT_SIZE 512
|
||||||
|
#define XMEM_ERASE_UNIT_SIZE (64*1024L)
|
||||||
|
|
||||||
|
|
||||||
|
#define CFS_CONF_OFFSET_TYPE long
|
||||||
|
|
||||||
|
|
||||||
|
/* Use the first 64k of external flash for node configuration */
|
||||||
|
#define NODE_ID_XMEM_OFFSET (0 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
/* Use the second 64k of external flash for codeprop. */
|
||||||
|
#define EEPROMFS_ADDR_CODEPROP (1 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
#define CFS_XMEM_CONF_OFFSET (2 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
#define CFS_XMEM_CONF_SIZE (1 * XMEM_ERASE_UNIT_SIZE)
|
||||||
|
|
||||||
|
#define CFS_RAM_CONF_SIZE 4096
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus configuration for the TMote Sky.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* SPI input/output registers. */
|
||||||
|
#define SPI_TXBUF U0TXBUF
|
||||||
|
#define SPI_RXBUF U0RXBUF
|
||||||
|
|
||||||
|
/* USART0 Tx ready? */
|
||||||
|
#define SPI_WAITFOREOTx() while ((U0TCTL & TXEPT) == 0)
|
||||||
|
/* USART0 Rx ready? */
|
||||||
|
#define SPI_WAITFOREORx() while ((IFG1 & URXIFG0) == 0)
|
||||||
|
/* USART0 Tx buffer ready? */
|
||||||
|
#define SPI_WAITFORTxREADY() while ((IFG1 & UTXIFG0) == 0)
|
||||||
|
|
||||||
|
#define SCK 1 /* P3.1 - Output: SPI Serial Clock (SCLK) */
|
||||||
|
#define MOSI 2 /* P3.2 - Output: SPI Master out - slave in (MOSI) */
|
||||||
|
#define MISO 3 /* P3.3 - Input: SPI Master in - slave out (MISO) */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus - M25P80 external flash configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define FLASH_PWR 3 /* P4.3 Output */
|
||||||
|
#define FLASH_CS 4 /* P4.4 Output */
|
||||||
|
#define FLASH_HOLD 7 /* P4.7 Output */
|
||||||
|
|
||||||
|
/* Enable/disable flash access to the SPI bus (active low). */
|
||||||
|
|
||||||
|
#define SPI_FLASH_ENABLE() ( P4OUT &= ~BV(FLASH_CS) )
|
||||||
|
#define SPI_FLASH_DISABLE() ( P4OUT |= BV(FLASH_CS) )
|
||||||
|
|
||||||
|
#define SPI_FLASH_HOLD() ( P4OUT &= ~BV(FLASH_HOLD) )
|
||||||
|
#define SPI_FLASH_UNHOLD() ( P4OUT |= BV(FLASH_HOLD) )
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI bus - CC2420 pin configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CC2420_CONF_SYMBOL_LOOP_COUNT 800
|
||||||
|
|
||||||
|
/* P1.0 - Input: FIFOP from CC2420 */
|
||||||
|
#define CC2420_FIFOP_PORT(type) P1##type
|
||||||
|
#define CC2420_FIFOP_PIN 0
|
||||||
|
/* P1.3 - Input: FIFO from CC2420 */
|
||||||
|
#define CC2420_FIFO_PORT(type) P1##type
|
||||||
|
#define CC2420_FIFO_PIN 3
|
||||||
|
/* P1.4 - Input: CCA from CC2420 */
|
||||||
|
#define CC2420_CCA_PORT(type) P1##type
|
||||||
|
#define CC2420_CCA_PIN 4
|
||||||
|
/* P4.1 - Input: SFD from CC2420 */
|
||||||
|
#define CC2420_SFD_PORT(type) P4##type
|
||||||
|
#define CC2420_SFD_PIN 1
|
||||||
|
/* P4.2 - Output: SPI Chip Select (CS_N) */
|
||||||
|
#define CC2420_CSN_PORT(type) P4##type
|
||||||
|
#define CC2420_CSN_PIN 2
|
||||||
|
/* P4.5 - Output: VREG_EN to CC2420 */
|
||||||
|
#define CC2420_VREG_PORT(type) P4##type
|
||||||
|
#define CC2420_VREG_PIN 5
|
||||||
|
/* P4.6 - Output: RESET_N to CC2420 */
|
||||||
|
#define CC2420_RESET_PORT(type) P4##type
|
||||||
|
#define CC2420_RESET_PIN 6
|
||||||
|
|
||||||
|
#define CC2420_IRQ_VECTOR PORT1_VECTOR
|
||||||
|
|
||||||
|
/* Pin status. */
|
||||||
|
#define CC2420_FIFOP_IS_1 (!!(CC2420_FIFOP_PORT(IN) & BV(CC2420_FIFOP_PIN)))
|
||||||
|
#define CC2420_FIFO_IS_1 (!!(CC2420_FIFO_PORT(IN) & BV(CC2420_FIFO_PIN)))
|
||||||
|
#define CC2420_CCA_IS_1 (!!(CC2420_CCA_PORT(IN) & BV(CC2420_CCA_PIN)))
|
||||||
|
#define CC2420_SFD_IS_1 (!!(CC2420_SFD_PORT(IN) & BV(CC2420_SFD_PIN)))
|
||||||
|
|
||||||
|
/* The CC2420 reset pin. */
|
||||||
|
#define SET_RESET_INACTIVE() (CC2420_RESET_PORT(OUT) |= BV(CC2420_RESET_PIN))
|
||||||
|
#define SET_RESET_ACTIVE() (CC2420_RESET_PORT(OUT) &= ~BV(CC2420_RESET_PIN))
|
||||||
|
|
||||||
|
/* CC2420 voltage regulator enable pin. */
|
||||||
|
#define SET_VREG_ACTIVE() (CC2420_VREG_PORT(OUT) |= BV(CC2420_VREG_PIN))
|
||||||
|
#define SET_VREG_INACTIVE() (CC2420_VREG_PORT(OUT) &= ~BV(CC2420_VREG_PIN))
|
||||||
|
|
||||||
|
/* CC2420 rising edge trigger for external interrupt 0 (FIFOP). */
|
||||||
|
#define CC2420_FIFOP_INT_INIT() do { \
|
||||||
|
CC2420_FIFOP_PORT(IES) &= ~BV(CC2420_FIFOP_PIN); \
|
||||||
|
CC2420_CLEAR_FIFOP_INT(); \
|
||||||
|
} while(0)
|
||||||
|
|
||||||
|
/* FIFOP on external interrupt 0. */
|
||||||
|
#define CC2420_ENABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) |= BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
#define CC2420_DISABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) &= ~BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
#define CC2420_CLEAR_FIFOP_INT() do {CC2420_FIFOP_PORT(IFG) &= ~BV(CC2420_FIFOP_PIN);} while(0)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enables/disables CC2420 access to the SPI bus (not the bus).
|
||||||
|
* (Chip Select)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ENABLE CSn (active low) */
|
||||||
|
#define CC2420_SPI_ENABLE() (CC2420_CSN_PORT(OUT) &= ~BV(CC2420_CSN_PIN))
|
||||||
|
/* DISABLE CSn (active low) */
|
||||||
|
#define CC2420_SPI_DISABLE() (CC2420_CSN_PORT(OUT) |= BV(CC2420_CSN_PIN))
|
||||||
|
#define CC2420_SPI_IS_ENABLED() ((CC2420_CSN_PORT(OUT) & BV(CC2420_CSN_PIN)) != BV(CC2420_CSN_PIN))
|
||||||
|
|
||||||
|
#endif /* __PLATFORM_CONF_H__ */
|
||||||
Loading…
Reference in a new issue