diff --git a/platform/zoul/remote-revb/README.md b/platform/zoul/remote-revb/README.md
index e92a1cac4..8b6095e24 100644
--- a/platform/zoul/remote-revb/README.md
+++ b/platform/zoul/remote-revb/README.md
@@ -26,6 +26,8 @@ The RE-Mote features a Zoul as its core module and it is bundled with the follow
 * Small form-factor of 73x40 mm.
 * Available with enclosure for indoor use
 
+The changes from Revision A to this new Revision B are summarized in the [Wiki](https://github.com/Zolertia/Resources/wiki/RE-Mote:-Enhancements-from-Rev.A-to-Rev.B)
+
 The most prominent feature of the RE-Mote is its ultra low-power implementation, allowing a flexible and time/date-aware control of the platform operation modes by using its real-time clock (RTCC) and an ultra-low power PIC governing the battery manager.
 
 The RE-Mote features an optional custom-made enclosure to fit most scenarios, allowing to easily connect sensors, actuators and rechargeable LiPo batteries.  Its on-board RP-SMA antenna eliminates the need to mechanize an external antenna, allowing to alternatively use either a sub-1GHz or 2.4GHz antenna, or a multiband one.  For dual band applications it is possible to use both sub-GHz and 2.4GHz interfaces simultaneously.
diff --git a/platform/zoul/remote-revb/board.h b/platform/zoul/remote-revb/board.h
index a88069e8e..783209e26 100644
--- a/platform/zoul/remote-revb/board.h
+++ b/platform/zoul/remote-revb/board.h
@@ -70,7 +70,7 @@
  * LED1.R/PD4            |-01|17-|   PB2/SPIO0.SCLK/CC1200.SCLK
  * LED2.G/JTAG.TDO/PB7   |-02|16-|   PB1/SPIO0.MOSI/CC1200.MOSI
  * LED3.B/JTAG.TDI/PB6   |-03|15-|   PB3/SPIO0.MISO/CC1200.MISO
- * UART0.RX/PA0          |-04|14-|   PA7/AIN7/USD.CS
+ * UART0.RX/PA0          |-04|14-|   PA7/AIN7/USD.CS|ADC5
  * UART0.TX/PA1          |-05|13-|   DGND
  * PD0                   |-06|12-|   D+3.3
  * I2C.SDA/PC2           |-07|11-|   PA5/AIN5/ADC1
@@ -78,7 +78,7 @@
  * DGND                  |-09|09-|   DGND
  * D+3.3                 |-10|08-|   D+5.0
  * CC1200.GPIO0/PB4      |-11|07-|   PA2/AIN2/ADC3
- * CC1200.GPIO2/PB0      |-12|06-|   PA6/AIN6/USD.SEL
+ * CC1200.GPIO2/PB0      |-12|06-|   PA6/AIN6/USD.SEL|ADC4
  * UART1.RX/PC1          |-13|05-|   PC6/SPI1.MISO
  * UART1.TX/PC0          |-14|04-|   PC5/SPI1.MOSI
  * DGND                  |-15|03-|   PC4/SPI1.SCLK
@@ -90,7 +90,7 @@
  * access to the RESET/user buttons:
  *
  * - JP4 (placed below JP6 connector): |1-| DGND, |2-| VBAT
- * - JP9 (placed above JP5 connector): |1-| BUTTON.RESET, |2-| BUTTON.USER
+ * - JP9 (placed above JP5 connector): |1-| BUTTON.RESET, |2-| BUTTON.USER|ADC6
  */
 /*---------------------------------------------------------------------------*/
 /** \name RE-Mote LED configuration