Doxygen fixes

This commit is contained in:
Simon Duquennoy 2014-12-02 12:00:00 +01:00
parent c2ca3e9fdb
commit 415506c3f6
5 changed files with 16 additions and 16 deletions

View file

@ -379,3 +379,5 @@ PROCESS_THREAD(servreg_hack_process, ev, data)
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
/** @} */

View file

@ -44,7 +44,7 @@
/**
* \defgroup simple-udp
* \defgroup simple-udp A simple UDP API
*
* The default Contiki UDP API is difficult to use. The simple-udp
* module provides a significantly simpler API.

View file

@ -112,7 +112,7 @@ typedef struct uip_icmp6_error{
* \brief Send an icmpv6 error message
* \param type type of the error message
* \param code of the error message
* \param type 32 bit parameter of the error message, semantic depends on error
* \param param 32 bit parameter of the error message, semantic depends on error
*/
void
uip_icmp6_error_output(uint8_t type, uint8_t code, uint32_t param);

View file

@ -33,7 +33,7 @@ init:
@echo "> Scanning files"
# This target requires and graphviz and doxygen
doxygen.log: docdirs = $(sort ,$(foreach dir,$(basedirs),${shell find ../${dir} -type d -not -path "*/.*" -not -path "*/obj_*"}))
doxygen.log: docdirs = $(sort $(foreach dir,$(basedirs),${shell find ../${dir} -type d -not -path "*/.*" -not -path "*/obj_*"}))
doxygen.log: docsrc = $(docdirs) $(foreach dir,$(docdirs),${shell find $(dir) -type f $(filetypes)}) $(manuals)
doxygen.log:
@doxygen Doxyfile

View file

@ -36,9 +36,9 @@ are part of the uIP IPv6 stack. A complete description can be found in the
corresponding IETF standards which are available at
http://www.ietf.org/rfc.html.
\note The #UIP_CONF_IPV6 compilation flag is used to enable IPv6 (and
disable IPv4). It is also recommended to set #UIP_CONF_IPV6_CHECKS to
1 if one cannot guarantee that the incoming packets are correctly formed.
\note The #NETSTACK_CONF_WITH_IPV6 compilation flag is used to enable IPv6.
It is also recommended to set #UIP_CONF_IPV6_CHECKS to 1
if one cannot guarantee that the incoming packets are correctly formed.
\subsection ipv6 IPv6 (RFC 2460)
The IP packets are processed in the #uip_process function.
@ -236,15 +236,15 @@ This section just lists all IPv6 related compile time flags. Each flag
function is documented in this page in the appropriate section.
\code
/*Boolean flags*/
UIP_CONF_IPV6
NETSTACK_CONF_WITH_IPV6
UIP_CONF_IPV6_CHECKS
UIP_CONF_IPV6_QUEUE_PKT
UIP_CONF_IPV6_REASSEMBLY
/*Integer flags*/
UIP_NETIF_MAX_ADDRESSES
UIP_ND6_MAX_PREFIXES
UIP_ND6_MAX_NEIGHBORS
UIP_ND6_MAX_DEFROUTER
UIP_CONF_NETIF_MAX_ADDRESSES
UIP_CONF_ND6_MAX_PREFIXES
UIP_CONF_ND6_MAX_DEFROUTERS
NBR_TABLE_CONF_MAX_NEIGHBORS
\endcode
<HR>
@ -257,10 +257,10 @@ reass "fragment reassembly" is enabled an additional buffer of the
same size is used.
The only difference with the IPv4 code is the per %neighbor buffering
that is available when #UIP_CONF_QUEUE_PKT is set to 1. This
that is available when #UIP_CONF_IPV6_QUEUE_PKT is set to 1. This
additional buffering is used to queue one packet per %neighbor while
performing address resolution for it. This is a very costly feature as
it increases the RAM usage by approximately #UIP_ND6_MAX_NEIGHBORS *
it increases the RAM usage by approximately #NBR_TABLE_CONF_MAX_NEIGHBORS *
#UIP_LINK_MTU bytes.
<HR>
@ -340,7 +340,7 @@ We will soon support RFC4944 transmission of IPv6 packets over 802.15.4\n
<b>IP layer</b><br>
\li IPv6 RFC2460 (MUST): When the compile flags UIP_CONF_IPV6_CHECKS and UIP_CONF_REASSEMBLY are set, full support
\li Neighbor Discovery RFC4861 (MUST): When the UIP_CONF_CHECKS and UIP_CONF_QUEUE_PKT flag are set, full support except redirect function
\li Neighbor Discovery RFC4861 (MUST): When the UIP_CONF_CHECKS and UIP_CONF_IPV6_QUEUE_PKT flag are set, full support except redirect function
\li Address Autoconfiguration RFC4862 (MUST): When the UIP_CONF_CHECKS flag is set, full support except sending MLD report (see MLD)
\li Path MTU Discovery RFC 1981 (SHOULD): no support
\li Jumbograms RFC 2675 (MAY): no support
@ -377,7 +377,5 @@ We pass all the tests for phase 2 except:
<HR>
@{
*/
/** @} */
/** @} */