Add params.c to Raven and sync with 128rfa1 contiki-conf.h
Contikimac works with mcu sleep on both platforms.
This commit is contained in:
David Kopf
parent
65032c4d35
commit
3612fdff5b
6 changed files with 638 additions and 453 deletions
|
|
@ -74,13 +74,12 @@ unsigned long clock_seconds(void);
|
|||
|
||||
/* Michael Hartman's atmega128rfa1 board has an external 32768Hz crystal connected to TOSC1 and 2 pins similar to the Raven 1284p */
|
||||
/* and theoretically can use TIMER2 with it to keep time. Else TIMER0 is used. */
|
||||
/* The sleep timer in raven-lcd.c also uses the crystal and adds a TIMER2 interrupt routine if not already define by clock.c */
|
||||
/* This has not been tested yet */
|
||||
/* The sleep timer requires the crystal and adds a TIMER2 interrupt routine if not already define by clock.c */
|
||||
#define AVR_CONF_USE32KCRYSTAL 0
|
||||
|
||||
/* Michael Hartman's protobyte board has LED on PORTE1, can be used for pings and radio on indication */
|
||||
/* However it requires disabling UART0. */
|
||||
#define RF230BB_CONF_LEDONPORTE1 1
|
||||
/* Michael Hartman's protobyte board has LED on PORTE1, used for radio on indication */
|
||||
/* However this results in disabling UART0. */
|
||||
#define RF230BB_CONF_LEDONPORTE1 0
|
||||
|
||||
/* COM port to be used for SLIP connection. This is usually UART0, but see above */
|
||||
#if RF230BB_CONF_LEDONPORTE1
|
||||
|
|
@ -96,47 +95,60 @@ unsigned long clock_seconds(void);
|
|||
/* Starting address for code received via the codeprop facility. Not tested on Raven */
|
||||
//#define EEPROMFS_ADDR_CODEPROP 0x8000
|
||||
|
||||
/* RADIOSTATS is used in rf230bb, clock.c and the webserver cgi to report radio usage */
|
||||
#define RADIOSTATS 1
|
||||
/* Logging adds 200 bytes to program size. RS232 output slows down webserver. */
|
||||
//#define LOG_CONF_ENABLED 1
|
||||
|
||||
/* More extensive stats */
|
||||
/* RADIOSTATS is used in rf230bb, clock.c and the webserver cgi to report radio usage */
|
||||
/* It has less overhead than ENERGEST */
|
||||
#define RADIOSTATS 1
|
||||
|
||||
/* More extensive stats, via main loop printfs or webserver status pages */
|
||||
#define ENERGEST_CONF_ON 1
|
||||
|
||||
/* Possible watchdog timeouts depend on mcu. Default is WDTO_2S. -1 Disables the watchdog. */
|
||||
/* Available watchdog timeouts depend on mcu. Default is WDTO_2S. -1 Disables the watchdog. */
|
||||
/* AVR Studio simulator tends to reboot due to clocking the WD 8 times too fast */
|
||||
//#define WATCHDOG_CONF_TIMEOUT -1
|
||||
|
||||
/* Debugflow macro, useful for tracing path through mac and radio interrupts */
|
||||
//#define DEBUGFLOWSIZE 128
|
||||
|
||||
/* Network setup. The new NETSTACK interface requires RF230BB (as does ip4) */
|
||||
#if RF230BB
|
||||
#undef PACKETBUF_CONF_HDR_SIZE //Use the packetbuf default for header size
|
||||
#else
|
||||
#define PACKETBUF_CONF_HDR_SIZE 0 //RF230 combined driver/mac handles headers internally
|
||||
#endif /*RF230BB */
|
||||
|
||||
/* Define MAX_*X_POWER to reduce tx power and ignore weak rx packets for testing a miniature multihop network.
|
||||
* Leave undefined for full power and sensitivity.
|
||||
* tx=0 (3dbm, default) to 15 (-17.2dbm)
|
||||
* RF230_CONF_AUTOACK sets the extended mode using the energy-detect register with rx=0 (-91dBm) to 84 (-7dBm)
|
||||
* else the rssi register is used having range 0 (91dBm) to 28 (-10dBm)
|
||||
* For simplicity RF230_MIN_RX_POWER is based on the energy-detect value and divided by 3 when autoack is not set.
|
||||
* On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested.
|
||||
* These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm
|
||||
* and a 10 meter range to a full-sensitivity RF230 sniffer.
|
||||
#define RF230_MAX_TX_POWER 15
|
||||
#define RF230_MIN_RX_POWER 30
|
||||
*/
|
||||
/* The rf231 and atmega128rfa1 can use an rssi threshold for triggering rx_busy that saves 0.5ma in rx mode */
|
||||
/* 1 - 15 maps into -90 to -48 dBm; the register is written with RF230_MIN_RX_POWER/6 + 1. Undefine for -100dBm sensitivity */
|
||||
//#define RF230_MIN_RX_POWER 0
|
||||
|
||||
/* Network setup */
|
||||
/* TX routine passes the cca/ack result in the return parameter */
|
||||
#define RDC_CONF_HARDWARE_ACK 1
|
||||
/* TX routine does automatic cca and optional backoff */
|
||||
#define RDC_CONF_HARDWARE_CSMA 1
|
||||
/* Allow MCU sleeping between channel checks */
|
||||
#define RDC_CONF_MCU_SLEEP 1
|
||||
|
||||
#if UIP_CONF_IPV6
|
||||
#define RIMEADDR_CONF_SIZE 8
|
||||
#define UIP_CONF_ICMP6 1
|
||||
#define UIP_CONF_UDP 1
|
||||
#define UIP_CONF_TCP 1
|
||||
//#define UIP_CONF_IPV6_RPL 0
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
||||
#else
|
||||
/* ip4 should build but is largely untested */
|
||||
#define RIMEADDR_CONF_SIZE 2
|
||||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
|
||||
/* See uip-ds6.h */
|
||||
#define UIP_CONF_DS6_NBR_NBU 20
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 20
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
#endif
|
||||
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 0
|
||||
|
|
@ -149,30 +161,10 @@ unsigned long clock_seconds(void);
|
|||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_1 {addr_contexts[1].prefix[0]=0xbb;addr_contexts[1].prefix[1]=0xbb;}
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_2 {addr_contexts[2].prefix[0]=0x20;addr_contexts[2].prefix[1]=0x01;addr_contexts[2].prefix[2]=0x49;addr_contexts[2].prefix[3]=0x78,addr_contexts[2].prefix[4]=0x1d;addr_contexts[2].prefix[5]=0xb1;}
|
||||
|
||||
/* 211 bytes per queue buffer */
|
||||
#define QUEUEBUF_CONF_NUM 8
|
||||
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 2
|
||||
|
||||
/* Take the default TCP maximum segment size for efficiency and simpler wireshark captures */
|
||||
/* Use this to prevent 6LowPAN fragmentation (whether or not fragmentation is enabled) */
|
||||
//#define UIP_CONF_TCP_MSS 48
|
||||
|
||||
/* 30 bytes per TCP connection */
|
||||
/* 6LoWPAN does not do well with concurrent TCP streams, as new browser GETs collide with packets coming */
|
||||
/* from previous GETs, causing decreased throughput, retransmissions, and timeouts. Increase to study this. */
|
||||
/* ACKs to other ports become interleaved with computation-intensive GETs, so ACKs are particularly missed. */
|
||||
/* Increasing the number of packet receive buffers in RAM helps to keep ACKs from being lost */
|
||||
|
||||
#define UIP_CONF_MAX_CONNECTIONS 4
|
||||
|
||||
/* 2 bytes per TCP listening port */
|
||||
#define UIP_CONF_MAX_LISTENPORTS 4
|
||||
|
||||
/* 25 bytes per UDP connection */
|
||||
#define UIP_CONF_UDP_CONNS 10
|
||||
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define UIP_CONF_FWCACHE_SIZE 0
|
||||
|
||||
|
|
@ -205,24 +197,75 @@ unsigned long clock_seconds(void);
|
|||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
/* How long to wait before terminating an idle TCP connection. Smaller to allow faster sleep. Default is 120 seconds */
|
||||
/* If wait is too short the connection can be reset as a result of multiple fragment reassembly timeouts */
|
||||
#define UIP_CONF_WAIT_TIMEOUT 20
|
||||
#define UIP_CONF_WAIT_TIMEOUT 20
|
||||
/* 211 bytes per queue buffer */
|
||||
#define QUEUEBUF_CONF_NUM 8
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 2
|
||||
/* Allocate remaining RAM as desired */
|
||||
/* 30 bytes per TCP connection */
|
||||
/* 6LoWPAN does not do well with concurrent TCP streams, as new browser GETs collide with packets coming */
|
||||
/* from previous GETs, causing decreased throughput, retransmissions, and timeouts. Increase to study this. */
|
||||
/* ACKs to other ports become interleaved with computation-intensive GETs, so ACKs are particularly missed. */
|
||||
/* Increasing the number of packet receive buffers in RAM helps to keep ACKs from being lost */
|
||||
#define UIP_CONF_MAX_CONNECTIONS 4
|
||||
/* 2 bytes per TCP listening port */
|
||||
#define UIP_CONF_MAX_LISTENPORTS 4
|
||||
/* 25 bytes per UDP connection */
|
||||
#define UIP_CONF_UDP_CONNS 10
|
||||
/* See uip-ds6.h */
|
||||
#define UIP_CONF_DS6_NBR_NBU 20
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 20
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
|
||||
|
||||
#elif 1 /* Contiki-mac radio cycling */
|
||||
#define NETSTACK_CONF_MAC nullmac_driver
|
||||
//#define NETSTACK_CONF_MAC csma_driver
|
||||
//#define NETSTACK_CONF_MAC nullmac_driver
|
||||
/* csma needed for burst mode at present. Webserver won't work without it */
|
||||
#define NETSTACK_CONF_MAC csma_driver
|
||||
#define NETSTACK_CONF_RDC contikimac_driver
|
||||
/* Default is two CCA separated by 500 usec */
|
||||
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
||||
/* Wireshark won't decode with the header, but padded packets will fail ipv6 checksum */
|
||||
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER 0
|
||||
/* So without the header this needed for RPL mesh to form */
|
||||
#define CONTIKIMAC_CONF_SHORTEST_PACKET_SIZE 43-18 //multicast RPL DIS length
|
||||
/* Not tested much yet */
|
||||
#define WITH_PHASE_OPTIMIZATION 0
|
||||
#define CONTIKIMAC_CONF_COMPOWER 1
|
||||
#define RIMESTATS_CONF_ON 1
|
||||
#define NETSTACK_CONF_FRAMER framer_802154
|
||||
#define NETSTACK_CONF_RADIO rf230_driver
|
||||
#define CHANNEL_802_15_4 26
|
||||
/* The radio needs to interrupt during an rtimer interrupt */
|
||||
#define RTIMER_CONF_NESTED_INTERRUPTS 1
|
||||
#define RF230_CONF_AUTOACK 1
|
||||
/* A 0 here means non-extended mode; 1 means extended mode with no retry, >1 for retrys */
|
||||
#define RF230_CONF_AUTORETRIES 1
|
||||
/* A 0 here means no cca; 1 means extended mode with cca but no retry, >1 for backoff retrys */
|
||||
#define RF230_CONF_CSMARETRIES 1
|
||||
#define CONTIKIMAC_CONF_RADIO_ALWAYS_ON 0
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
||||
/* 211 bytes per queue buffer. Contikimac burst mode needs 15 for a 1280 byte MTU */
|
||||
#define QUEUEBUF_CONF_NUM 15
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 2
|
||||
/* Allocate remaining RAM. Not much left due to queuebuf increase */
|
||||
#define UIP_CONF_MAX_CONNECTIONS 2
|
||||
#define UIP_CONF_MAX_LISTENPORTS 4
|
||||
#define UIP_CONF_UDP_CONNS 5
|
||||
#define UIP_CONF_DS6_NBR_NBU 4
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 4
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
|
||||
|
||||
#elif 1 /* cx-mac radio cycling */
|
||||
/* RF230 does clear-channel assessment in extended mode (autoretries>0) */
|
||||
|
|
@ -241,7 +284,21 @@ unsigned long clock_seconds(void);
|
|||
#define SICSLOWPAN_CONF_MAXAGE 3
|
||||
#define CXMAC_CONF_ANNOUNCEMENTS 0
|
||||
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
||||
|
||||
/* 211 bytes per queue buffer. Burst mode will need 15 for a 1280 byte MTU */
|
||||
#define QUEUEBUF_CONF_NUM 15
|
||||
/* 54 bytes per queue ref buffer */
|
||||
#define QUEUEBUF_CONF_REF_NUM 2
|
||||
/* Allocate remaining RAM. Not much left due to queuebuf increase */
|
||||
#define UIP_CONF_MAX_CONNECTIONS 2
|
||||
#define UIP_CONF_MAX_LISTENPORTS 4
|
||||
#define UIP_CONF_UDP_CONNS 5
|
||||
#define UIP_CONF_DS6_NBR_NBU 4
|
||||
#define UIP_CONF_DS6_DEFRT_NBU 2
|
||||
#define UIP_CONF_DS6_PREFIX_NBU 3
|
||||
#define UIP_CONF_DS6_ROUTE_NBU 4
|
||||
#define UIP_CONF_DS6_ADDR_NBU 3
|
||||
#define UIP_CONF_DS6_MADDR_NBU 0
|
||||
#define UIP_CONF_DS6_AADDR_NBU 0
|
||||
//Below gives 10% duty cycle, undef for default 5%
|
||||
//#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 80)
|
||||
//Below gives 50% duty cycle
|
||||
|
|
@ -251,34 +308,16 @@ unsigned long clock_seconds(void);
|
|||
#error Network configuration not specified!
|
||||
#endif /* Network setup */
|
||||
|
||||
/* Logging adds 200 bytes to program size */
|
||||
#define LOG_CONF_ENABLED 1
|
||||
|
||||
/* ************************************************************************** */
|
||||
//#pragma mark RPL Settings
|
||||
/* ************************************************************************** */
|
||||
#if UIP_CONF_IPV6_RPL
|
||||
|
||||
/* Define MAX_*X_POWER to reduce tx power and ignore weak rx packets for testing a miniature multihop network.
|
||||
* Leave undefined for full power and sensitivity.
|
||||
* tx=0 (3dbm, default) to 15 (-17.2dbm)
|
||||
* RF230_CONF_AUTOACK sets the extended mode using the energy-detect register with rx=0 (-91dBm) to 84 (-7dBm)
|
||||
* else the rssi register is used having range 0 (91dBm) to 28 (-10dBm)
|
||||
* For simplicity RF230_MIN_RX_POWER is based on the energy-detect value and divided by 3 when autoack is not set.
|
||||
* On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested.
|
||||
* These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm
|
||||
* and a 10 meter range to a full-sensitivity RF230 sniffer.
|
||||
#define RF230_MAX_TX_POWER 15
|
||||
#define RF230_MIN_RX_POWER 30
|
||||
*/
|
||||
|
||||
#define UIP_CONF_ROUTER 1
|
||||
#define UIP_CONF_ND6_SEND_RA 0
|
||||
#define UIP_CONF_ND6_REACHABLE_TIME 600000
|
||||
#define UIP_CONF_ND6_RETRANS_TIMER 10000
|
||||
|
||||
#undef UIP_CONF_UDP_CONNS
|
||||
#define UIP_CONF_UDP_CONNS 12
|
||||
/* For slow slip connections, to prevent buffer overruns */
|
||||
//#define UIP_CONF_RECEIVE_WINDOW 300
|
||||
#undef UIP_CONF_FWCACHE_SIZE
|
||||
|
|
@ -297,5 +336,6 @@ unsigned long clock_seconds(void);
|
|||
/* PROJECT_CONF_H might be defined in the project Makefile */
|
||||
#ifdef PROJECT_CONF_H
|
||||
#include PROJECT_CONF_H
|
||||
#endif /* PROJECT_CONF_H */
|
||||
#endif
|
||||
|
||||
#endif /* __CONTIKI_CONF_H__ */
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue