Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094).

The port was done jointly by Zolertia and George Oikonomou (University of Bristol).

platform/remote/dev/led-strip.h

@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2015, Zolertia
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/* -------------------------------------------------------------------------- */
+/**
+ * \addtogroup remote-sensors
+ * @{
+ *
+ * \defgroup remote-led-strip Re-Mote LED strip driver
+ *
+ * Driver to control a bright LED strip powered at 3VDC, drawing power directly
+ * from the battery power supply.  An example on how to adapt 12VDC LED strips
+ * to 3VDC is provided at http://www.hackster.io/zolertia
+ * @{
+ *
+ * \file
+ * Header file for the Re-Mote bright LED strip Driver
+ */
+/* -------------------------------------------------------------------------- */
+#ifndef LED_STRIP_H_
+#define LED_STRIP_H_
+/* -------------------------------------------------------------------------- */
+#include <stdint.h>
+/* -------------------------------------------------------------------------- */
+#define LED_STRIP_OFF   0xFF
+#define LED_STRIP_ON    0x00
+
+#define LED_STRIP_ERROR   -1
+/* -------------------------------------------------------------------------- */
+/**
+ * \brief Init function for the bright LED strip driver
+ *
+ * The LED strip driver allows to lighten up any application using up to 4
+ * LEDs 3VDC-powered per strip
+ * The function is set to power OFF the LEDs as default,
+ * it should be called from the contiki-main initialization process.
+ *
+ * \return ignored
+ */
+void led_strip_config(void);
+
+/**
+ * \brief Function to turn ON/OFF the LED strip
+ *
+ * \param val Set ON/OFF (LED_STRIP_ON or LED_STRIP_OFF)
+ * \return the selected antenna position, or LED_STRIP_ERROR if not
+ *         previously configured
+ */
+int led_strip_switch(uint8_t val);
+
+/**
+ * \brief Function to get the LED strip current state
+ *
+ * \return Current LED strip state or LED_STRIP_ERROR if not
+ *         previously configured
+ */
+int led_strip_get(void);
+/* -------------------------------------------------------------------------- */
+#endif /* ifndef LED_STRIP_H_ */
+/* -------------------------------------------------------------------------- */
+/**
+ * @}
+ * @}
+ */
+