diff --git a/cpu/cc253x/dev/cc2530-rf.c b/cpu/cc253x/dev/cc2530-rf.c
index fe52d79c3..3bd769142 100644
--- a/cpu/cc253x/dev/cc2530-rf.c
+++ b/cpu/cc253x/dev/cc2530-rf.c
@@ -96,6 +96,10 @@
 /* 192 ms, radio off -> on interval */
 #define ONOFF_TIME                    RTIMER_ARCH_SECOND / 3125
 
+#define CC2530_RF_CHANNEL_SET_ERROR      -1
+
+#define CC2530_RF_TX_POWER_TXCTRL_MIN_VAL 0x09 /* Value for min TX Power */
+#define CC2530_RF_TX_POWER_TXCTRL_DEF_VAL 0x69 /* Reset Value */
 /*---------------------------------------------------------------------------*/
 #if CC2530_RF_CONF_HEXDUMP
 #include "dev/io-arch.h"
@@ -114,50 +118,215 @@ static int on(void); /* prepare() needs our prototype */
 static int off(void); /* transmit() needs our prototype */
 static int channel_clear(void); /* transmit() needs our prototype */
 /*---------------------------------------------------------------------------*/
-int8_t
-cc2530_rf_channel_set(uint8_t channel)
+/* TX Power dBm lookup table. Values from SmartRF Studio v1.16.0 */
+typedef struct output_config {
+  radio_value_t power;
+  uint8_t txpower_val;
+} output_config_t;
+
+static const output_config_t output_power[] = {
+  {  5, 0xF5 }, /* 4.5 */
+  {  3, 0xE5 }, /* 2.5 */
+  {  1, 0xD5 },
+  {  0, 0xC5 }, /* -0.5 */
+  { -1, 0xB5 }, /* -1.5 */
+  { -3, 0xA5 },
+  { -4, 0x95 },
+  { -6, 0x85 },
+  { -8, 0x75 },
+  {-10, 0x65 },
+  {-12, 0x55 },
+  {-14, 0x45 },
+  {-16, 0x35 },
+  {-18, 0x25 },
+  {-20, 0x15 },
+  {-22, 0x05 },
+  {-28, 0x05 }, /* TXCTRL must be set to 0x09 */
+};
+
+#define OUTPUT_CONFIG_COUNT (sizeof(output_power) / sizeof(output_config_t))
+
+/* Max and Min Output Power in dBm */
+#define OUTPUT_POWER_MIN    (output_power[OUTPUT_CONFIG_COUNT - 1].power)
+#define OUTPUT_POWER_MAX    (output_power[0].power)
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Get the current operating channel
+ * \return Returns a value in [11,26] representing the current channel
+ */
+static uint8_t
+get_channel()
+{
+  return (uint8_t)((FREQCTRL + 44) / 5);
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Set the current operating channel
+ * \param channel The desired channel as a value in [11,26]
+ * \return Returns a value in [11,26] representing the current channel
+ *         or a negative value if \e channel was out of bounds
+ */
+static int8_t
+set_channel(uint8_t channel)
 {
   PUTSTRING("RF: Set Chan\n");
 
   if((channel < CC2530_RF_CHANNEL_MIN) || (channel > CC2530_RF_CHANNEL_MAX)) {
-    return -1;
+    return CC2530_RF_CHANNEL_SET_ERROR;
   }
 
+  /* Changes to FREQCTRL take effect after the next recalibration */
   /* Changes to FREQCTRL take effect after the next recalibration */
   off();
   FREQCTRL = (CC2530_RF_CHANNEL_MIN
       + (channel - CC2530_RF_CHANNEL_MIN) * CC2530_RF_CHANNEL_SPACING);
   on();
 
-  return (int8_t) channel;
+  return (int8_t)channel;
 }
 /*---------------------------------------------------------------------------*/
-uint8_t
-cc2530_rf_power_set(uint8_t new_power)
+static radio_value_t
+get_pan_id(void)
 {
-  PUTSTRING("RF: Set Power\n");
-  /* off() */
-  TXPOWER = new_power;
-  /* on() */
-
-  return TXPOWER;
+  return (radio_value_t)(PAN_ID1 << 8 | PAN_ID0);
 }
 /*---------------------------------------------------------------------------*/
-void
-cc2530_rf_set_addr(uint16_t pan)
+static void
+set_pan_id(uint16_t pan)
 {
-#if LINKADDR_SIZE==8 /* EXT_ADDR[7:0] is ignored when using short addresses */
-  int i;
-  for(i = (LINKADDR_SIZE - 1); i >= 0; --i) {
-    ((uint8_t *)&EXT_ADDR0)[i] = linkaddr_node_addr.u8[LINKADDR_SIZE - 1 - i];
-  }
-#endif
-
   PAN_ID0 = pan & 0xFF;
   PAN_ID1 = pan >> 8;
+}
+/*---------------------------------------------------------------------------*/
+static radio_value_t
+get_short_addr(void)
+{
+  return (radio_value_t)(SHORT_ADDR1 << 8 | SHORT_ADDR0);
+}
+/*---------------------------------------------------------------------------*/
+static void
+set_short_addr(uint16_t addr)
+{
+  SHORT_ADDR0 = addr & 0xFF;
+  SHORT_ADDR1 = addr >> 8;
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * \brief Reads the current signal strength (RSSI)
+ * \return The current RSSI in dBm
+ *
+ * This function reads the current RSSI on the currently configured
+ * channel.
+ */
+static radio_value_t
+get_rssi(void)
+{
+  int8_t rssi;
 
-  SHORT_ADDR0 = linkaddr_node_addr.u8[LINKADDR_SIZE - 1];
-  SHORT_ADDR1 = linkaddr_node_addr.u8[LINKADDR_SIZE - 2];
+  /* If we are off, turn on first */
+  if(RXENABLE == 0) {
+    rf_flags |= WAS_OFF;
+    on();
+  }
+
+  /* Wait on RSSI_VALID */
+  while((RSSISTAT & RSSISTAT_RSSI_VALID) == 0);
+
+  rssi = (radio_value_t)RSSI - RSSI_OFFSET;
+
+  /* If we were off, turn back off */
+  if((rf_flags & WAS_OFF) == WAS_OFF) {
+    rf_flags &= ~WAS_OFF;
+    off();
+  }
+
+  return rssi;
+}
+/*---------------------------------------------------------------------------*/
+/* Returns the current CCA threshold in dBm */
+static radio_value_t
+get_cca_threshold(void)
+{
+  return (int8_t)CCACTRL0 - RSSI_OFFSET;
+}
+/*---------------------------------------------------------------------------*/
+/* Sets the CCA threshold in dBm */
+static void
+set_cca_threshold(radio_value_t value)
+{
+  CCACTRL0 = (value + RSSI_OFFSET) & 0xFF;
+}
+/*---------------------------------------------------------------------------*/
+/* Returns the current TX power in dBm */
+static radio_value_t
+get_tx_power(void)
+{
+  int i;
+  uint8_t reg_val = TXPOWER;
+
+  if(TXCTRL == CC2530_RF_TX_POWER_TXCTRL_MIN_VAL) {
+    return OUTPUT_POWER_MIN;
+  }
+
+  /*
+   * Find the TXPOWER value in the lookup table
+   * If the value has been written with set_tx_power, we should be able to
+   * find the exact value. However, in case the register has been written in
+   * a different fashion, we return the immediately lower value of the lookup
+   */
+  for(i = 0; i < OUTPUT_CONFIG_COUNT; i++) {
+    if(reg_val >= output_power[i].txpower_val) {
+      return output_power[i].power;
+    }
+  }
+  return OUTPUT_POWER_MIN;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ * Set TX power to 'at least' power dBm
+ * This works with a lookup table. If the value of 'power' does not exist in
+ * the lookup table, TXPOWER will be set to the immediately higher available
+ * value
+ */
+static void
+set_tx_power(radio_value_t power)
+{
+  int i;
+
+  if(power <= output_power[OUTPUT_CONFIG_COUNT - 1].power) {
+    TXCTRL = CC2530_RF_TX_POWER_TXCTRL_MIN_VAL;
+    TXPOWER = output_power[OUTPUT_CONFIG_COUNT - 1].txpower_val;
+    return;
+  }
+
+  for(i = OUTPUT_CONFIG_COUNT - 2; i >= 0; --i) {
+    if(power <= output_power[i].power) {
+      /* Perhaps an earlier call set TXCTRL to 0x09. Restore */
+      TXCTRL = CC2530_RF_TX_POWER_TXCTRL_DEF_VAL;
+      TXPOWER = output_power[i].txpower_val;
+      return;
+    }
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+set_frame_filtering(uint8_t enable)
+{
+  if(enable) {
+    FRMFILT0 |= FRMFILT0_FRAME_FILTER_EN;
+  } else {
+    FRMFILT0 &= ~FRMFILT0_FRAME_FILTER_EN;
+  }
+}
+/*---------------------------------------------------------------------------*/
+static void
+set_auto_ack(uint8_t enable)
+{
+  if(enable) {
+    FRMCTRL0 |= FRMCTRL0_AUTOACK;
+  } else {
+    FRMCTRL0 &= ~FRMCTRL0_AUTOACK;
+  }
 }
 /*---------------------------------------------------------------------------*/
 /* Netstack API radio driver functions */
@@ -204,8 +373,7 @@ init(void)
   /* MAX FIFOP threshold */
   FIFOPCTRL = CC2530_RF_MAX_PACKET_LEN;
 
-  cc2530_rf_power_set(CC2530_RF_TX_POWER);
-  cc2530_rf_channel_set(CC2530_RF_CHANNEL);
+  TXPOWER = CC2530_RF_TX_POWER;
 
   RF_TX_LED_OFF();
   RF_RX_LED_OFF();
@@ -486,24 +654,148 @@ off(void)
 static radio_result_t
 get_value(radio_param_t param, radio_value_t *value)
 {
-  return RADIO_RESULT_NOT_SUPPORTED;
+  if(!value) {
+    return RADIO_RESULT_INVALID_VALUE;
+  }
+
+  switch(param) {
+  case RADIO_PARAM_POWER_MODE:
+    *value = RXENABLE == 0 ? RADIO_POWER_MODE_OFF : RADIO_POWER_MODE_ON;
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_CHANNEL:
+    *value = (radio_value_t)get_channel();
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_PAN_ID:
+    *value = get_pan_id();
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_16BIT_ADDR:
+    *value = get_short_addr();
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_RX_MODE:
+    *value = 0;
+    if(FRMFILT0 & FRMFILT0_FRAME_FILTER_EN) {
+      *value |= RADIO_RX_MODE_ADDRESS_FILTER;
+    }
+    if(FRMCTRL0 & FRMCTRL0_AUTOACK) {
+      *value |= RADIO_RX_MODE_AUTOACK;
+    }
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_TXPOWER:
+    *value = get_tx_power();
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_CCA_THRESHOLD:
+    *value = get_cca_threshold();
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_RSSI:
+    *value = get_rssi();
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_CHANNEL_MIN:
+    *value = CC2530_RF_CHANNEL_MIN;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_CHANNEL_MAX:
+    *value = CC2530_RF_CHANNEL_MAX;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_TXPOWER_MIN:
+    *value = OUTPUT_POWER_MIN;
+    return RADIO_RESULT_OK;
+  case RADIO_CONST_TXPOWER_MAX:
+    *value = OUTPUT_POWER_MAX;
+    return RADIO_RESULT_OK;
+  default:
+    return RADIO_RESULT_NOT_SUPPORTED;
+  }
 }
 /*---------------------------------------------------------------------------*/
 static radio_result_t
 set_value(radio_param_t param, radio_value_t value)
 {
-  return RADIO_RESULT_NOT_SUPPORTED;
+  switch(param) {
+  case RADIO_PARAM_POWER_MODE:
+    if(value == RADIO_POWER_MODE_ON) {
+      on();
+      return RADIO_RESULT_OK;
+    }
+    if(value == RADIO_POWER_MODE_OFF) {
+      off();
+      return RADIO_RESULT_OK;
+    }
+    return RADIO_RESULT_INVALID_VALUE;
+  case RADIO_PARAM_CHANNEL:
+    if(value < CC2530_RF_CHANNEL_MIN || value > CC2530_RF_CHANNEL_MAX) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+    if(set_channel(value) == CC2530_RF_CHANNEL_SET_ERROR) {
+      return RADIO_RESULT_ERROR;
+    }
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_PAN_ID:
+    set_pan_id(value & 0xffff);
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_16BIT_ADDR:
+    set_short_addr(value & 0xffff);
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_RX_MODE:
+    if(value & ~(RADIO_RX_MODE_ADDRESS_FILTER |
+                 RADIO_RX_MODE_AUTOACK)) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+
+    set_frame_filtering((value & RADIO_RX_MODE_ADDRESS_FILTER) != 0);
+    set_auto_ack((value & RADIO_RX_MODE_AUTOACK) != 0);
+
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_TXPOWER:
+    if(value < OUTPUT_POWER_MIN || value > OUTPUT_POWER_MAX) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+
+    set_tx_power(value);
+    return RADIO_RESULT_OK;
+  case RADIO_PARAM_CCA_THRESHOLD:
+    set_cca_threshold(value);
+    return RADIO_RESULT_OK;
+  default:
+    return RADIO_RESULT_NOT_SUPPORTED;
+  }
 }
 /*---------------------------------------------------------------------------*/
 static radio_result_t
 get_object(radio_param_t param, void *dest, size_t size)
 {
+  uint8_t *target;
+  int i;
+
+  if(param == RADIO_PARAM_64BIT_ADDR) {
+    if(size != 8 || !dest) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+
+    target = dest;
+    for(i = 0; i < 8; i++) {
+      target[i] = ((uint8_t *)&EXT_ADDR0)[7 - i] & 0xFF;
+    }
+
+    return RADIO_RESULT_OK;
+  }
   return RADIO_RESULT_NOT_SUPPORTED;
 }
 /*---------------------------------------------------------------------------*/
 static radio_result_t
 set_object(radio_param_t param, const void *src, size_t size)
 {
+  int i;
+
+  if(param == RADIO_PARAM_64BIT_ADDR) {
+    if(size != 8 || !src) {
+      return RADIO_RESULT_INVALID_VALUE;
+    }
+
+    for(i = 0; i < 8; i++) {
+      ((uint8_t *)&EXT_ADDR0)[i] = ((uint8_t *)src)[7 - i];
+    }
+
+    return RADIO_RESULT_OK;
+  }
   return RADIO_RESULT_NOT_SUPPORTED;
 }
 /*---------------------------------------------------------------------------*/
diff --git a/cpu/cc253x/dev/cc2530-rf.h b/cpu/cc253x/dev/cc2530-rf.h
index f5722db5f..4e092ca7a 100644
--- a/cpu/cc253x/dev/cc2530-rf.h
+++ b/cpu/cc253x/dev/cc2530-rf.h
@@ -120,9 +120,6 @@
 /*---------------------------------------------------------------------------*/
 extern const struct radio_driver cc2530_rf_driver;
 /*---------------------------------------------------------------------------*/
-int8_t cc2530_rf_channel_set(uint8_t channel);
-#define cc2530_rf_channel_get() ((uint8_t)((FREQCTRL + 44) / 5))
-uint8_t cc2530_rf_power_set(uint8_t new_power);
 void cc2530_rf_set_addr(uint16_t pan);
 /*---------------------------------------------------------------------------*/
 #endif /* CC2530_RF_H_ */
diff --git a/cpu/cc253x/sfr-bits.h b/cpu/cc253x/sfr-bits.h
index 7a4d72cac..09173cf18 100644
--- a/cpu/cc253x/sfr-bits.h
+++ b/cpu/cc253x/sfr-bits.h
@@ -184,6 +184,9 @@
 /*---------------------------------------------------------------------------
  * Radio Register Bits
  *---------------------------------------------------------------------------*/
+/* FRMFILT0 */
+#define FRMFILT0_FRAME_FILTER_EN    0x01
+
 /* FRMCTRL0 */
 #define FRMCTRL0_APPEND_DATA_MODE   0x80
 #define FRMCTRL0_AUTOCRC            0x40
diff --git a/platform/cc2530dk/contiki-main.c b/platform/cc2530dk/contiki-main.c
index 7e63650f9..22f458da8 100644
--- a/platform/cc2530dk/contiki-main.c
+++ b/platform/cc2530dk/contiki-main.c
@@ -9,6 +9,7 @@
 #include "dev/io-arch.h"
 #include "dev/dma.h"
 #include "dev/cc2530-rf.h"
+#include "dev/radio.h"
 #include "dev/watchdog.h"
 #include "dev/clock-isr.h"
 #include "dev/port2.h"
@@ -79,9 +80,11 @@ fade(int l) CC_NON_BANKED
 }
 /*---------------------------------------------------------------------------*/
 static void
-set_rime_addr(void) CC_NON_BANKED
+set_rf_params(void) CC_NON_BANKED
 {
   char i;
+  uint16_t short_addr;
+  uint8_t ext_addr[8];
 
 #if CC2530_CONF_MAC_FROM_PRIMARY
   __xdata unsigned char *macp = &X_IEEE_ADDR;
@@ -114,8 +117,12 @@ set_rime_addr(void) CC_NON_BANKED
   FMAP = CC2530_LAST_FLASH_BANK;
 #endif
 
-  for(i = (LINKADDR_SIZE - 1); i >= 0; --i) {
-    linkaddr_node_addr.u8[i] = *macp;
+  /*
+   * Read IEEE address from flash, store in ext_addr.
+   * Invert endianness (from little to big endian)
+   */
+  for(i = 7; i >= 0; --i) {
+    ext_addr[i] = *macp;
     macp++;
   }
 
@@ -125,6 +132,12 @@ set_rime_addr(void) CC_NON_BANKED
   ENABLE_INTERRUPTS();
 #endif
 
+  short_addr = ext_addr[7];
+  short_addr |= ext_addr[6] << 8;
+
+  /* Populate linkaddr_node_addr. Maintain endianness */
+  memcpy(&linkaddr_node_addr, &ext_addr[8 - LINKADDR_SIZE], LINKADDR_SIZE);
+
   /* Now the address is stored MSB first */
 #if STARTUP_CONF_VERBOSE
   PUTSTRING("Rime configured with address ");
@@ -136,7 +149,11 @@ set_rime_addr(void) CC_NON_BANKED
   PUTCHAR('\n');
 #endif
 
-  cc2530_rf_set_addr(IEEE802154_PANID);
+  /* Write params to RF registers */
+  NETSTACK_RADIO.set_value(RADIO_PARAM_PAN_ID, IEEE802154_PANID);
+  NETSTACK_RADIO.set_value(RADIO_PARAM_16BIT_ADDR, short_addr);
+  NETSTACK_RADIO.set_value(RADIO_PARAM_CHANNEL, CC2530_RF_CHANNEL);
+  NETSTACK_RADIO.set_object(RADIO_PARAM_64BIT_ADDR, ext_addr, 8);
   return;
 }
 /*---------------------------------------------------------------------------*/
@@ -235,7 +252,7 @@ main(void) CC_NON_BANKED
 
   /* initialize the netstack */
   netstack_init();
-  set_rime_addr();
+  set_rf_params();
 
 #if BUTTON_SENSOR_ON || ADC_SENSOR_ON
   process_start(&sensors_process, NULL);