Added 6502 driver for WIZnet W5100 in MACRAW mode.
This commit is contained in:
Oliver Schmidt
parent
2316c6b461
commit
2d7d1b123d
|
|
@ -35,7 +35,7 @@ ifndef CC65_HOME
|
||||||
${error CC65_HOME not defined! You must specify where cc65 resides}
|
${error CC65_HOME not defined! You must specify where cc65 resides}
|
||||||
endif
|
endif
|
||||||
|
|
||||||
all: cs8900a.eth lan91c96.eth
|
all: cs8900a.eth lan91c96.eth w5100.eth
|
||||||
|
|
||||||
CONTIKI_TARGET_DIRS = . lib sys
|
CONTIKI_TARGET_DIRS = . lib sys
|
||||||
CONTIKI_CPU_DIRS = . lib sys ctk net
|
CONTIKI_CPU_DIRS = . lib sys ctk net
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ bufsize:.res 2 ; Size
|
||||||
|
|
||||||
.zeropage
|
.zeropage
|
||||||
|
|
||||||
sp: .res 2 ; Stack pointer (Do not trash !)
|
sp: .res 2 ; Stack pointer (Do not trash !)
|
||||||
reg: .res 2 ; Address of rxtxreg
|
reg: .res 2 ; Address of rxtxreg
|
||||||
ptr: .res 2 ; Indirect addressing pointer
|
ptr: .res 2 ; Indirect addressing pointer
|
||||||
len: .res 2 ; Frame length
|
len: .res 2 ; Frame length
|
||||||
|
|
|
||||||
458
cpu/6502/net/w5100.S
Normal file
458
cpu/6502/net/w5100.S
Normal file
|
|
@ -0,0 +1,458 @@
|
||||||
|
;
|
||||||
|
; Copyright (c) 2013, Oliver Schmidt
|
||||||
|
; All rights reserved.
|
||||||
|
;
|
||||||
|
; Redistribution and use in source and binary forms, with or without
|
||||||
|
; modification, are permitted provided that the following conditions
|
||||||
|
; are met:
|
||||||
|
; 1. Redistributions of source code must retain the above copyright
|
||||||
|
; notice, this list of conditions and the following disclaimer.
|
||||||
|
; 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
; notice, this list of conditions and the following disclaimer in the
|
||||||
|
; documentation and/or other materials provided with the distribution.
|
||||||
|
; 3. Neither the name of the Institute nor the names of its contributors
|
||||||
|
; may be used to endorse or promote products derived from this software
|
||||||
|
; without specific prior written permission.
|
||||||
|
;
|
||||||
|
; THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||||
|
; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||||
|
; ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||||
|
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||||
|
; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||||
|
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||||
|
; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||||
|
; SUCH DAMAGE.
|
||||||
|
;
|
||||||
|
; This file is part of the Contiki operating system.
|
||||||
|
;
|
||||||
|
; Author: Oliver Schmidt <ol.sc@web.de>
|
||||||
|
;
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
.segment "JUMPTABLE"
|
||||||
|
|
||||||
|
; Driver signature
|
||||||
|
.byte $65, $74, $68 ; "eth"
|
||||||
|
.byte $01 ; Ethernet driver API version number
|
||||||
|
|
||||||
|
; Ethernet address
|
||||||
|
mac: .byte $00, $08, $DC ; OUI of WIZnet
|
||||||
|
.byte $11, $11, $11
|
||||||
|
|
||||||
|
; Buffer attributes
|
||||||
|
bufaddr:.res 2 ; Address
|
||||||
|
bufsize:.res 2 ; Size
|
||||||
|
|
||||||
|
; Jump table.
|
||||||
|
.addr init
|
||||||
|
.addr poll
|
||||||
|
.addr send
|
||||||
|
.addr exit
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
.zeropage
|
||||||
|
|
||||||
|
sp: .res 2 ; Stack pointer (Do not trash !)
|
||||||
|
reg: .res 2 ; Pointer Register content
|
||||||
|
ptr: .res 2 ; Indirect addressing pointer
|
||||||
|
len: .res 2 ; Data length
|
||||||
|
cnt: .res 2 ; Data length counter
|
||||||
|
adv: .res 2 ; Data pointer advancement
|
||||||
|
dir: .res 1 ; Transfer direction
|
||||||
|
bas: .res 1 ; Socket 0 Base Address (hibyte)
|
||||||
|
lim: .res 1 ; Socket 0 memory limit (hibyte)
|
||||||
|
tmp: .res 1 ; Temporary value
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
.rodata
|
||||||
|
|
||||||
|
fixup: .byte fixup02-fixup01, fixup03-fixup02, fixup04-fixup03
|
||||||
|
.byte fixup05-fixup04, fixup06-fixup05, fixup07-fixup06
|
||||||
|
.byte fixup08-fixup07, fixup09-fixup08, fixup10-fixup09
|
||||||
|
.byte fixup11-fixup10, fixup12-fixup11, fixup13-fixup12
|
||||||
|
.byte fixup14-fixup13, fixup15-fixup14, fixup16-fixup15
|
||||||
|
.byte fixup17-fixup16, fixup18-fixup17, fixup19-fixup18
|
||||||
|
.byte fixup20-fixup19, fixup21-fixup20, fixup22-fixup21
|
||||||
|
.byte fixup23-fixup22, fixup24-fixup23, fixup25-fixup24
|
||||||
|
|
||||||
|
fixups = * - fixup
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
mode := $FF00 ; High byte patched at runtime
|
||||||
|
addr := $FF01 ; High byte patched at runtime
|
||||||
|
data := $FF03 ; High byte patched at runtime
|
||||||
|
|
||||||
|
.data
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
init:
|
||||||
|
; Save address of register base
|
||||||
|
sta reg
|
||||||
|
stx reg+1
|
||||||
|
|
||||||
|
; Start with first fixup location
|
||||||
|
lda #<(fixup01+1)
|
||||||
|
ldx #>(fixup01+1)
|
||||||
|
sta ptr
|
||||||
|
stx ptr+1
|
||||||
|
ldx #$FF
|
||||||
|
ldy #$00
|
||||||
|
|
||||||
|
; Fixup address at location
|
||||||
|
: lda reg
|
||||||
|
ora (ptr),y
|
||||||
|
sta (ptr),y
|
||||||
|
iny
|
||||||
|
lda reg+1
|
||||||
|
sta (ptr),y
|
||||||
|
dey
|
||||||
|
|
||||||
|
; Advance to next fixup location
|
||||||
|
inx
|
||||||
|
cpx #fixups
|
||||||
|
bcs :+
|
||||||
|
lda ptr
|
||||||
|
clc
|
||||||
|
adc fixup,x
|
||||||
|
sta ptr
|
||||||
|
bcc :-
|
||||||
|
inc ptr+1
|
||||||
|
bcs :- ; Always
|
||||||
|
|
||||||
|
; S/W Reset
|
||||||
|
: lda #$80
|
||||||
|
fixup01:sta mode
|
||||||
|
:
|
||||||
|
fixup02:lda mode
|
||||||
|
bmi :-
|
||||||
|
|
||||||
|
; Indirect Bus I/F mode, Address Auto-Increment, Ping Block
|
||||||
|
lda #$13
|
||||||
|
fixup03:sta mode
|
||||||
|
|
||||||
|
; Source Hardware Address Register: MAC Address
|
||||||
|
ldx #$00 ; Hibyte
|
||||||
|
ldy #$09 ; Lobyte
|
||||||
|
jsr set_addr
|
||||||
|
: lda mac,x
|
||||||
|
fixup04:sta data
|
||||||
|
inx
|
||||||
|
cpx #$06
|
||||||
|
bcc :-
|
||||||
|
|
||||||
|
; RX Memory Size Register: Assign 8KB to socket 0
|
||||||
|
; TX Memory Size Register: Assign 8KB to socket 0
|
||||||
|
ldx #$00 ; Hibyte
|
||||||
|
ldy #$1A ; Lobyte
|
||||||
|
jsr set_addr
|
||||||
|
lda #$03
|
||||||
|
fixup05:sta data
|
||||||
|
fixup06:sta data
|
||||||
|
|
||||||
|
; Socket 0 Mode Register: MACRAW, MAC Filter
|
||||||
|
; Socket 0 Command Register: OPEN
|
||||||
|
ldy #$00
|
||||||
|
jsr set_addrsocket0
|
||||||
|
lda #$44
|
||||||
|
fixup07:sta data
|
||||||
|
lda #$01
|
||||||
|
fixup08:sta data
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
poll:
|
||||||
|
; Set parameters for receiving data
|
||||||
|
lda #>$6000 ; Socket 0 RX Base Address
|
||||||
|
ldx #$00 ; Read
|
||||||
|
jsr set_parameters
|
||||||
|
|
||||||
|
; Socket RX Received Size Register: != 0 ?
|
||||||
|
ldy #$26 ; Socket RX Received Size Register
|
||||||
|
jsr set_addrsocket0
|
||||||
|
fixup09:lda data ; Hibyte
|
||||||
|
fixup10:ora data ; Lobyte
|
||||||
|
bne :+
|
||||||
|
|
||||||
|
; No data available
|
||||||
|
tax
|
||||||
|
rts
|
||||||
|
|
||||||
|
; Process the incoming data
|
||||||
|
; -------------------------
|
||||||
|
|
||||||
|
: ; ldy #$28 ; Socket RX Read Pointer Register
|
||||||
|
; jsr set_addrsocket0
|
||||||
|
|
||||||
|
; Calculate and set pyhsical address
|
||||||
|
jsr set_addrphysical
|
||||||
|
|
||||||
|
; Read MAC raw 2byte packet size header
|
||||||
|
jsr get_datacheckaddr ; Hibyte
|
||||||
|
sta adv+1
|
||||||
|
jsr get_datacheckaddr ; Lobyte
|
||||||
|
sta adv
|
||||||
|
|
||||||
|
; Subtract 2byte header and set length
|
||||||
|
sec
|
||||||
|
sbc #<$0002
|
||||||
|
sta len
|
||||||
|
sta cnt
|
||||||
|
lda adv+1
|
||||||
|
sbc #>$0002
|
||||||
|
sta len+1
|
||||||
|
sta cnt+1
|
||||||
|
|
||||||
|
; Is bufsize < length ?
|
||||||
|
lda bufsize
|
||||||
|
cmp len
|
||||||
|
lda bufsize+1
|
||||||
|
sbc len+1
|
||||||
|
bcs :+
|
||||||
|
|
||||||
|
; Set data length = 0 and skip read
|
||||||
|
lda #$00
|
||||||
|
sta len
|
||||||
|
sta len+1
|
||||||
|
beq :++ ; Always
|
||||||
|
|
||||||
|
; Read data
|
||||||
|
: jsr mov_data
|
||||||
|
|
||||||
|
; Set parameters for common code
|
||||||
|
: lda #$40 ; RECV
|
||||||
|
ldy #$28 ; Socket 0 RX Read Pointer Register
|
||||||
|
|
||||||
|
; Advance pointer register
|
||||||
|
common: jsr set_addrsocket0
|
||||||
|
tay ; Save command
|
||||||
|
lda reg
|
||||||
|
clc
|
||||||
|
adc adv
|
||||||
|
tax
|
||||||
|
lda reg+1
|
||||||
|
adc adv+1
|
||||||
|
fixup11:sta data ; Hibyte
|
||||||
|
fixup12:stx data ; Lobyte
|
||||||
|
|
||||||
|
; Set command register
|
||||||
|
tya ; Restore command
|
||||||
|
jsr set_addrcmdreg0
|
||||||
|
fixup13:sta data
|
||||||
|
|
||||||
|
; Return data length (will be ignored for send)
|
||||||
|
lda len
|
||||||
|
ldx len+1
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
send:
|
||||||
|
; Save data length
|
||||||
|
sta len
|
||||||
|
stx len+1
|
||||||
|
sta cnt
|
||||||
|
stx cnt+1
|
||||||
|
sta adv
|
||||||
|
stx adv+1
|
||||||
|
|
||||||
|
; Set parameters for transmitting data
|
||||||
|
lda #>$4000 ; Socket 0 TX Base Address
|
||||||
|
ldx #$01 ; Write
|
||||||
|
jsr set_parameters
|
||||||
|
|
||||||
|
; Socket 0 TX Free Size Register: < length ?
|
||||||
|
: ldy #$20
|
||||||
|
jsr set_addrsocket0
|
||||||
|
fixup14:lda data ; Hibyte
|
||||||
|
fixup15:ldx data ; Lobyte
|
||||||
|
cpx len
|
||||||
|
sbc len+1
|
||||||
|
bcc :-
|
||||||
|
|
||||||
|
; Send the data
|
||||||
|
; -------------
|
||||||
|
|
||||||
|
ldy #$24 ; Socket TX Write Pointer Register
|
||||||
|
jsr set_addrsocket0
|
||||||
|
|
||||||
|
; Calculate and set pyhsical address
|
||||||
|
jsr set_addrphysical
|
||||||
|
|
||||||
|
; Write data
|
||||||
|
jsr mov_data
|
||||||
|
|
||||||
|
; Set parameters for common code
|
||||||
|
lda #$20 ; SEND
|
||||||
|
ldy #$24 ; Socket TX Write Pointer Register
|
||||||
|
bne common ; Always
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
exit:
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
set_addrphysical:
|
||||||
|
fixup16:lda data ; Hibyte
|
||||||
|
fixup17:ldy data ; Lobyte
|
||||||
|
sta reg+1
|
||||||
|
sty reg
|
||||||
|
and #>$1FFF ; Socket Mask Address (hibyte)
|
||||||
|
ora bas ; Socket Base Address (hibyte)
|
||||||
|
tax
|
||||||
|
set_addr:
|
||||||
|
fixup18:stx addr ; Hibyte
|
||||||
|
fixup19:sty addr+1 ; Lobyte
|
||||||
|
rts
|
||||||
|
|
||||||
|
set_addrcmdreg0:
|
||||||
|
ldy #$01 ; Socket Command Register
|
||||||
|
set_addrsocket0:
|
||||||
|
ldx #>$0400 ; Socket 0 register base address
|
||||||
|
bne set_addr ; Always
|
||||||
|
|
||||||
|
set_addrbase:
|
||||||
|
ldx bas ; Socket Base Address (hibyte)
|
||||||
|
ldy #<$0000 ; Socket Base Address (lobyte)
|
||||||
|
beq set_addr ; Always
|
||||||
|
|
||||||
|
get_datacheckaddr:
|
||||||
|
fixup20:lda data
|
||||||
|
ldx addr ; Hibyte
|
||||||
|
cpx lim ; Socket memory limit (hibyte)
|
||||||
|
bcs set_addrbase
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
set_parameters:
|
||||||
|
; Setup variables in zero page
|
||||||
|
sta bas ; Socket Base Address
|
||||||
|
clc
|
||||||
|
adc #>$2000 ; Socket memory size
|
||||||
|
sta lim ; Socket memory limit
|
||||||
|
stx dir ; Transfer direction
|
||||||
|
|
||||||
|
; Set indirect addressing pointer
|
||||||
|
lda bufaddr
|
||||||
|
ldx bufaddr+1
|
||||||
|
sta ptr
|
||||||
|
stx ptr+1
|
||||||
|
|
||||||
|
; Wait for previous command to complete
|
||||||
|
; Socket 0 Command Register: = 0 ?
|
||||||
|
: jsr set_addrcmdreg0
|
||||||
|
fixup21:lda data
|
||||||
|
bne :-
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
||||||
|
mov_data:
|
||||||
|
; Calculate highest R/W address allowing
|
||||||
|
; to R/W without address wraparound
|
||||||
|
sec
|
||||||
|
lda #<$0000 ; Socket memory limit (lobyte)
|
||||||
|
sbc len
|
||||||
|
tay
|
||||||
|
lda lim ; Socket memory limit (hibyte)
|
||||||
|
sbc len+1
|
||||||
|
tax
|
||||||
|
tya
|
||||||
|
|
||||||
|
; R/W without address wraparound possible because
|
||||||
|
; highest R/W address > actual R/W address ?
|
||||||
|
; sec
|
||||||
|
fixup22:sbc addr+1 ; Lobyte
|
||||||
|
tay
|
||||||
|
txa
|
||||||
|
fixup23:sbc addr ; Hibyte
|
||||||
|
tax
|
||||||
|
tya
|
||||||
|
bcs :+
|
||||||
|
|
||||||
|
; Calculate length of first chunk
|
||||||
|
; clc
|
||||||
|
adc len
|
||||||
|
sta cnt
|
||||||
|
tay
|
||||||
|
txa
|
||||||
|
adc len+1
|
||||||
|
sta cnt+1
|
||||||
|
tax
|
||||||
|
tya
|
||||||
|
|
||||||
|
; R/W first chunk
|
||||||
|
jsr rw_data
|
||||||
|
|
||||||
|
; Wraparound R/W address
|
||||||
|
jsr set_addrbase
|
||||||
|
|
||||||
|
; Set buffer pointer for second chunk
|
||||||
|
clc
|
||||||
|
lda bufaddr
|
||||||
|
adc cnt
|
||||||
|
sta ptr
|
||||||
|
lda bufaddr+1
|
||||||
|
adc cnt+1
|
||||||
|
sta ptr+1
|
||||||
|
|
||||||
|
; Calculate length of second chunk
|
||||||
|
sec
|
||||||
|
lda len
|
||||||
|
sbc cnt
|
||||||
|
sta cnt
|
||||||
|
lda len+1
|
||||||
|
sbc cnt+1
|
||||||
|
sta cnt+1
|
||||||
|
|
||||||
|
; Get length of (second) chunk
|
||||||
|
: lda cnt
|
||||||
|
ldx cnt+1
|
||||||
|
|
||||||
|
; R/W (second) chunk
|
||||||
|
rw_data:eor #$FF ; Two's complement part 1
|
||||||
|
tay
|
||||||
|
iny ; Two's complement part 2
|
||||||
|
sty tmp
|
||||||
|
sec
|
||||||
|
lda ptr
|
||||||
|
sbc tmp
|
||||||
|
sta ptr
|
||||||
|
lda ptr+1
|
||||||
|
sbc #$00
|
||||||
|
sta ptr+1
|
||||||
|
lda dir ; Transfer direction
|
||||||
|
bne :++
|
||||||
|
|
||||||
|
; Read data
|
||||||
|
:
|
||||||
|
fixup24:lda data
|
||||||
|
sta (ptr),y
|
||||||
|
iny
|
||||||
|
bne :-
|
||||||
|
inc ptr+1
|
||||||
|
dex
|
||||||
|
bpl :-
|
||||||
|
rts
|
||||||
|
|
||||||
|
; Write data
|
||||||
|
: lda (ptr),y
|
||||||
|
fixup25:sta data
|
||||||
|
iny
|
||||||
|
bne :-
|
||||||
|
inc ptr+1
|
||||||
|
dex
|
||||||
|
bpl :-
|
||||||
|
rts
|
||||||
|
|
||||||
|
;---------------------------------------------------------------------
|
||||||
|
|
@ -60,6 +60,7 @@ disk: all
|
||||||
java -jar $(AC) -p contiki.dsk contiki.cfg bin 0 < $(CONTIKI)/tools/$(TARGET)/sample.cfg
|
java -jar $(AC) -p contiki.dsk contiki.cfg bin 0 < $(CONTIKI)/tools/$(TARGET)/sample.cfg
|
||||||
java -jar $(AC) -p contiki.dsk cs8900a.eth rel 0 < cs8900a.eth
|
java -jar $(AC) -p contiki.dsk cs8900a.eth rel 0 < cs8900a.eth
|
||||||
java -jar $(AC) -p contiki.dsk lan91c96.eth rel 0 < lan91c96.eth
|
java -jar $(AC) -p contiki.dsk lan91c96.eth rel 0 < lan91c96.eth
|
||||||
|
java -jar $(AC) -p contiki.dsk w5100.eth rel 0 < w5100.eth
|
||||||
ifeq ($(findstring WITH_MOUSE,$(DEFINES)),WITH_MOUSE)
|
ifeq ($(findstring WITH_MOUSE,$(DEFINES)),WITH_MOUSE)
|
||||||
java -jar $(AC) -p contiki.dsk a2e.stdmou.mou rel 0 < $(CC65_HOME)/mou/a2e.stdmou.mou
|
java -jar $(AC) -p contiki.dsk a2e.stdmou.mou rel 0 < $(CC65_HOME)/mou/a2e.stdmou.mou
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue