Merge pull request #194 from g-oikonomou/cc2538-forward
New Platform: TI CC2538 Development Kit
This commit is contained in:
Adam Dunkels
commit
260b004b7e
74 changed files with 13125 additions and 0 deletions
86
cpu/cc2538/Makefile.cc2538
Normal file
86
cpu/cc2538/Makefile.cc2538
Normal file
|
|
@ -0,0 +1,86 @@
|
|||
CC = arm-none-eabi-gcc
|
||||
CPP = arm-none-eabi-cpp
|
||||
LD = arm-none-eabi-gcc
|
||||
AR = arm-none-eabi-ar
|
||||
OBJCOPY = arm-none-eabi-objcopy
|
||||
NM = arm-none-eabi-nm
|
||||
|
||||
LDSCRIPT = $(OBJECTDIR)/cc2538.ld
|
||||
|
||||
CFLAGS += -O2 -mcpu=cortex-m3 -mthumb -mlittle-endian
|
||||
CFLAGS += -fshort-enums -fomit-frame-pointer -fno-strict-aliasing
|
||||
CFLAGS += -Wall
|
||||
LDFLAGS += -mcpu=cortex-m3 -mthumb -nostartfiles
|
||||
LDFLAGS += -T $(LDSCRIPT)
|
||||
LDFLAGS += -Wl,-Map=$(@:.elf=-$(TARGET).map),--cref,--no-warn-mismatch
|
||||
OBJCOPY_FLAGS += -O binary --gap-fill 0xff
|
||||
|
||||
### Are we building with code size optimisations?
|
||||
ifeq ($(SMALL),1)
|
||||
CFLAGS += -ffunction-sections -fdata-sections
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
endif
|
||||
|
||||
### If the user-specified a Node ID, pass a define
|
||||
ifdef NODEID
|
||||
CFLAGS += -DIEEE_ADDR_NODE_ID=$(NODEID)
|
||||
endif
|
||||
|
||||
### CPU-dependent cleanup files
|
||||
CLEAN += symbols.c symbols.h *.d *.elf
|
||||
|
||||
### CPU-dependent directories
|
||||
CONTIKI_CPU_DIRS = . dev usb
|
||||
|
||||
### Use the existing debug I/O in cpu/arm/common
|
||||
CONTIKI_CPU_DIRS += ../arm/common/dbg-io
|
||||
|
||||
### Use usb core from cpu/cc253x/usb/common
|
||||
CONTIKI_CPU_DIRS += ../cc253x/usb/common ../cc253x/usb/common/cdc-acm
|
||||
|
||||
### CPU-dependent source files
|
||||
CONTIKI_CPU_SOURCEFILES += clock.c rtimer-arch.c uart.c watchdog.c
|
||||
CONTIKI_CPU_SOURCEFILES += nvic.c cpu.c sys-ctrl.c gpio.c ioc.c
|
||||
CONTIKI_CPU_SOURCEFILES += cc2538-rf.c udma.c lpm.c
|
||||
CONTIKI_CPU_SOURCEFILES += dbg.c ieee-addr.c
|
||||
CONTIKI_CPU_SOURCEFILES += slip-arch.c slip.c
|
||||
|
||||
DEBUG_IO_SOURCEFILES += dbg-printf.c dbg-snprintf.c dbg-sprintf.c strformat.c
|
||||
|
||||
USB_CORE_SOURCEFILES += usb-core.c cdc-acm.c
|
||||
USB_ARCH_SOURCEFILES += usb-arch.c usb-serial.c cdc-acm-descriptors.c
|
||||
|
||||
CONTIKI_SOURCEFILES += $(CONTIKI_CPU_SOURCEFILES) $(DEBUG_IO_SOURCEFILES)
|
||||
CONTIKI_SOURCEFILES += $(USB_CORE_SOURCEFILES) $(USB_ARCH_SOURCEFILES)
|
||||
|
||||
### Don't treat the .elf as intermediate
|
||||
.PRECIOUS: %.elf %.bin
|
||||
|
||||
### Always re-build ieee-addr.o in case the command line passes a new NODEID
|
||||
FORCE:
|
||||
|
||||
$(OBJECTDIR)/ieee-addr.o: ieee-addr.c FORCE
|
||||
$(CC) $(CFLAGS) -c $< -o $@
|
||||
|
||||
### Compilation rules
|
||||
CUSTOM_RULE_LINK=1
|
||||
|
||||
%.elf: $(TARGET_STARTFILES) %.co $(PROJECT_OBJECTFILES) $(PROJECT_LIBRARIES) contiki-$(TARGET).a $(LDSCRIPT)
|
||||
$(LD) $(LDFLAGS) ${filter-out $(LDSCRIPT) %.a,$^} ${filter %.a,$^} -o $@
|
||||
|
||||
%.bin: %.elf
|
||||
$(OBJCOPY) $(OBJCOPY_FLAGS) $< $@
|
||||
|
||||
### We don't really need the .bin for the .$(TARGET) but let's make sure it
|
||||
### gets built
|
||||
%.$(TARGET): %.elf %.bin
|
||||
cp $< $@
|
||||
|
||||
### This rule is used to generate the correct linker script
|
||||
LDGENFLAGS += $(addprefix -D,$(subst $(COMMA), ,$(DEFINES)))
|
||||
LDGENFLAGS += $(addprefix -I,$(SOURCEDIRS))
|
||||
LDGENFLAGS += -imacros "contiki-conf.h"
|
||||
LDGENFLAGS += -P -E
|
||||
|
||||
$(LDSCRIPT): $(CONTIKI_CPU)/cc2538.lds FORCE
|
||||
$(CPP) $(LDGENFLAGS) $< -o $@
|
||||
87
cpu/cc2538/cc2538.lds
Normal file
87
cpu/cc2538/cc2538.lds
Normal file
|
|
@ -0,0 +1,87 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*
|
||||
* cc2538 linker configuration file. This is not the actual file used at link
|
||||
* stage. Rather, it is used as input for the auto-generation of the actual
|
||||
* ld script, which is called cc2538.ld and will be in the project directory
|
||||
*/
|
||||
#if (LPM_CONF_MAX_PM==2) && (LPM_CONF_ENABLE != 0)
|
||||
#define SRAM_START 0x20004000
|
||||
#define SRAM_LEN 0x00004000
|
||||
#else
|
||||
#define SRAM_START 0x20000000
|
||||
#define SRAM_LEN 0x00008000
|
||||
#endif
|
||||
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x200000, LENGTH = 0x0007FFD4
|
||||
FLASH_CCA (RX) : ORIGIN = 0x0027FFD4, LENGTH = 12
|
||||
SRAM (RWX) : ORIGIN = SRAM_START, LENGTH = SRAM_LEN
|
||||
}
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
_text = .;
|
||||
KEEP(*(.vectors))
|
||||
*(.text*)
|
||||
*(.rodata*)
|
||||
_etext = .;
|
||||
} > FLASH= 0
|
||||
|
||||
.data :
|
||||
{
|
||||
_data = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
_edata = .;
|
||||
} > SRAM AT > FLASH
|
||||
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx*)
|
||||
} > FLASH
|
||||
|
||||
.bss :
|
||||
{
|
||||
_bss = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
_ebss = .;
|
||||
} > SRAM
|
||||
|
||||
.flashcca :
|
||||
{
|
||||
KEEP(*(.flashcca))
|
||||
} > FLASH_CCA
|
||||
}
|
||||
227
cpu/cc2538/clock.c
Normal file
227
cpu/cc2538/clock.c
Normal file
|
|
@ -0,0 +1,227 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-clock cc2538 Clock
|
||||
*
|
||||
* Implementation of the clock module for the cc2538
|
||||
*
|
||||
* To implement the clock functionality, we use the SysTick peripheral on the
|
||||
* cortex-M3. We run the system clock at 16 MHz and we set the SysTick to give
|
||||
* us 128 interrupts / sec
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Clock driver implementation for the TI cc2538
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "systick.h"
|
||||
#include "reg.h"
|
||||
#include "cpu.h"
|
||||
#include "dev/gptimer.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
|
||||
#include "sys/energest.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define RELOAD_VALUE (125000 - 1) /** Fire 128 times / sec */
|
||||
|
||||
static volatile clock_time_t count;
|
||||
static volatile unsigned long secs = 0;
|
||||
static volatile uint8_t second_countdown = CLOCK_SECOND;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Arch-specific implementation of clock_init for the cc2538
|
||||
*
|
||||
* We initialise the SysTick to fire 128 interrupts per second, giving us a
|
||||
* value of 128 for CLOCK_SECOND
|
||||
*
|
||||
* We also initialise GPT0:Timer A, which is used by clock_delay_usec().
|
||||
* We use 16-bit range (individual), count-down, one-shot, no interrupts.
|
||||
* The system clock is at 16MHz giving us 62.5 nano sec ticks for Timer A.
|
||||
* Prescaled by 16 gives us a very convenient 1 tick per usec
|
||||
*/
|
||||
void
|
||||
clock_init(void)
|
||||
{
|
||||
count = 0;
|
||||
|
||||
REG(SYSTICK_STRELOAD) = RELOAD_VALUE;
|
||||
|
||||
/* System clock source, Enable */
|
||||
REG(SYSTICK_STCTRL) |= SYSTICK_STCTRL_CLK_SRC | SYSTICK_STCTRL_ENABLE;
|
||||
|
||||
/* Enable the SysTick Interrupt */
|
||||
REG(SYSTICK_STCTRL) |= SYSTICK_STCTRL_INTEN;
|
||||
|
||||
/*
|
||||
* Remove the clock gate to enable GPT0 and then initialise it
|
||||
* We only use GPT0 for clock_delay_usec. We initialise it here so we can
|
||||
* have it ready when it's needed
|
||||
*/
|
||||
REG(SYS_CTRL_RCGCGPT) |= SYS_CTRL_RCGCGPT_GPT0;
|
||||
|
||||
/* Make sure GPT0 is off */
|
||||
REG(GPT_0_BASE | GPTIMER_CTL) = 0;
|
||||
|
||||
|
||||
/* 16-bit */
|
||||
REG(GPT_0_BASE | GPTIMER_CFG) = 0x04;
|
||||
|
||||
/* One-Shot, Count Down, No Interrupts */
|
||||
REG(GPT_0_BASE | GPTIMER_TAMR) = GPTIMER_TAMR_TAMR_ONE_SHOT;
|
||||
|
||||
/* Prescale by 16 (thus, value 15 in TAPR) */
|
||||
REG(GPT_0_BASE | GPTIMER_TAPR) = 0x0F;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
CCIF clock_time_t
|
||||
clock_time(void)
|
||||
{
|
||||
return count;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
clock_set_seconds(unsigned long sec)
|
||||
{
|
||||
secs = sec;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
CCIF unsigned long
|
||||
clock_seconds(void)
|
||||
{
|
||||
return secs;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
clock_wait(clock_time_t i)
|
||||
{
|
||||
clock_time_t start;
|
||||
|
||||
start = clock_time();
|
||||
while(clock_time() - start < (clock_time_t)i);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Arch-specific implementation of clock_delay_usec for the cc2538
|
||||
* \param len Delay \e len uSecs
|
||||
*
|
||||
* See clock_init() for GPT0 Timer A's configuration
|
||||
*/
|
||||
void
|
||||
clock_delay_usec(uint16_t len)
|
||||
{
|
||||
REG(GPT_0_BASE | GPTIMER_TAILR) = len;
|
||||
REG(GPT_0_BASE | GPTIMER_CTL) |= GPTIMER_CTL_TAEN;
|
||||
|
||||
/* One-Shot mode: TAEN will be cleared when the timer reaches 0 */
|
||||
while(REG(GPT_0_BASE | GPTIMER_CTL) & GPTIMER_CTL_TAEN);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Obsolete delay function but we implement it here since some code
|
||||
* still uses it
|
||||
*/
|
||||
void
|
||||
clock_delay(unsigned int i)
|
||||
{
|
||||
clock_delay_usec(i);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Adjust the clock by moving it forward by a number of ticks
|
||||
* \param ticks The number of ticks
|
||||
*
|
||||
* This function is useful when coming out of PM1/2, during which the system
|
||||
* clock is stopped. We adjust the clock by moving it forward by a number of
|
||||
* ticks equal to the deep sleep duration. We update the seconds counter if
|
||||
* we have to and we also do some housekeeping so that the next second will
|
||||
* increment when it is meant to.
|
||||
*
|
||||
* \note This function is only meant to be used by lpm_exit(). Applications
|
||||
* should really avoid calling this
|
||||
*/
|
||||
void
|
||||
clock_adjust(clock_time_t ticks)
|
||||
{
|
||||
/* Halt the SysTick while adjusting */
|
||||
REG(SYSTICK_STCTRL) &= ~SYSTICK_STCTRL_ENABLE;
|
||||
|
||||
/* Moving forward by more than a second? */
|
||||
secs += ticks >> 7;
|
||||
|
||||
/* Increment tick count */
|
||||
count += ticks;
|
||||
|
||||
/*
|
||||
* Update internal second countdown so that next second change will actually
|
||||
* happen when it's meant to happen.
|
||||
*/
|
||||
second_countdown -= ticks;
|
||||
|
||||
if(second_countdown == 0 || second_countdown > 128) {
|
||||
secs++;
|
||||
second_countdown -= 128;
|
||||
}
|
||||
|
||||
/* Re-Start the SysTick */
|
||||
REG(SYSTICK_STCTRL) |= SYSTICK_STCTRL_ENABLE;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief The clock Interrupt Service Routine. It polls the etimer process
|
||||
* if an etimer has expired. It also updates the software clock tick and
|
||||
* seconds counter since reset.
|
||||
*/
|
||||
void
|
||||
clock_isr(void)
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
count++;
|
||||
if(etimer_pending()) {
|
||||
etimer_request_poll();
|
||||
}
|
||||
|
||||
if(--second_countdown == 0) {
|
||||
secs++;
|
||||
second_countdown = CLOCK_SECOND;
|
||||
}
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
72
cpu/cc2538/cpu.c
Normal file
72
cpu/cc2538/cpu.c
Normal file
|
|
@ -0,0 +1,72 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-cpu
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementations of interrupt control on the cc2538 Cortex-M3 micro
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
unsigned long __attribute__((naked))
|
||||
cpu_cpsie(void)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
/* Read PRIMASK and enable interrupts */
|
||||
__asm(" mrs r0, PRIMASK\n"
|
||||
" cpsie i\n"
|
||||
" bx lr\n"
|
||||
: "=r" (ret));
|
||||
|
||||
/* The inline asm returns, we never reach here.
|
||||
* We add a return statement to keep the compiler happy */
|
||||
return ret;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
unsigned long __attribute__((naked))
|
||||
cpu_cpsid(void)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
/* Read PRIMASK and disable interrupts */
|
||||
__asm(" mrs r0, PRIMASK\n"
|
||||
" cpsid i\n"
|
||||
" bx lr\n"
|
||||
: "=r" (ret));
|
||||
|
||||
/* The inline asm returns, we never reach here.
|
||||
* We add a return statement to keep the compiler happy */
|
||||
return ret;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
65
cpu/cc2538/cpu.h
Normal file
65
cpu/cc2538/cpu.h
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-cpu cc2538 CPU
|
||||
*
|
||||
* cc2538 CPU-specific functions for the cc2538 core
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with prototypes for interrupt control on the cc2538
|
||||
* Cortex-M3 micro
|
||||
*
|
||||
*/
|
||||
#ifndef CPU_H_
|
||||
#define CPU_H_
|
||||
|
||||
/** \brief Disables all CPU interrupts */
|
||||
unsigned long cpu_cpsid(void);
|
||||
|
||||
/** \brief Enables all CPU interrupts */
|
||||
unsigned long cpu_cpsie(void);
|
||||
|
||||
/** \brief Enables all CPU interrupts */
|
||||
#define INTERRUPTS_ENABLE() cpu_cpsie()
|
||||
|
||||
/** \brief Disables all CPU interrupts. */
|
||||
#define INTERRUPTS_DISABLE() cpu_cpsid()
|
||||
|
||||
#endif /* CPU_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
117
cpu/cc2538/dbg.c
Normal file
117
cpu/cc2538/dbg.c
Normal file
|
|
@ -0,0 +1,117 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/** \addtogroup cc2538-char-io
|
||||
* @{ */
|
||||
/**
|
||||
* \file
|
||||
* Implementation of arch-specific functions required by the dbg_io API in
|
||||
* cpu/arm/common/dbg-io
|
||||
*/
|
||||
#include "contiki.h"
|
||||
|
||||
#include "dbg.h"
|
||||
#include "dev/uart.h"
|
||||
#include "usb/usb-serial.h"
|
||||
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef DBG_CONF_USB
|
||||
#define DBG_CONF_USB 0
|
||||
#endif
|
||||
|
||||
#if DBG_CONF_USB
|
||||
#define write_byte(b) usb_serial_writeb(b)
|
||||
#define flush() usb_serial_flush()
|
||||
#else
|
||||
#define write_byte(b) uart_write_byte(b)
|
||||
#define flush()
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#undef putchar
|
||||
#undef puts
|
||||
|
||||
#define SLIP_END 0300
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int
|
||||
putchar(int c)
|
||||
{
|
||||
#if DBG_CONF_SLIP_MUX
|
||||
static char debug_frame = 0;
|
||||
|
||||
if(!debug_frame) {
|
||||
write_byte(SLIP_END);
|
||||
write_byte('\r');
|
||||
debug_frame = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
write_byte(c);
|
||||
|
||||
if(c == '\n') {
|
||||
#if DBG_CONF_SLIP_MUX
|
||||
write_byte(SLIP_END);
|
||||
debug_frame = 0;
|
||||
#endif
|
||||
dbg_flush();
|
||||
}
|
||||
return c;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
unsigned int
|
||||
dbg_send_bytes(const unsigned char *s, unsigned int len)
|
||||
{
|
||||
unsigned int i = 0;
|
||||
|
||||
while(s && *s != 0) {
|
||||
if(i >= len) {
|
||||
break;
|
||||
}
|
||||
putchar(*s++);
|
||||
i++;
|
||||
}
|
||||
return i;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int
|
||||
puts(const char *s)
|
||||
{
|
||||
unsigned int i = 0;
|
||||
|
||||
while(s && *s != 0) {
|
||||
putchar(*s++);
|
||||
i++;
|
||||
}
|
||||
putchar('\n');
|
||||
return i;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
91
cpu/cc2538/dbg.h
Normal file
91
cpu/cc2538/dbg.h
Normal file
|
|
@ -0,0 +1,91 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-char-io cc2538 Character I/O
|
||||
*
|
||||
* cc2538 CPU-specific functions for debugging and SLIP I/O
|
||||
*
|
||||
* On the cc2538, character I/O can be directed over USB or UART. This is
|
||||
* controlled by a series of configuration directives:
|
||||
* - SLIP_ARCH_CONF_USB: Controls the operation of slip-arch.
|
||||
* - CC2538_RF_CONF_SNIFFER_USB: Controls the output of the RF driver when
|
||||
* operating as a sniffer
|
||||
* - DBG_CONF_USB: Controls all debugging output
|
||||
*
|
||||
* Defaults for those defines are set in contiki-conf.h
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538 Debug I/O module
|
||||
*/
|
||||
#ifndef DBG_H_
|
||||
#define DBG_H_
|
||||
|
||||
#include "contiki-conf.h"
|
||||
|
||||
#include "usb/usb-serial.h"
|
||||
/**
|
||||
* \brief Print a stream of bytes
|
||||
* \param seq A pointer to the stream
|
||||
* \param len The number of bytes to print
|
||||
* \return The number of printed bytes
|
||||
*
|
||||
* This function is an arch-specific implementation required by the dbg-io
|
||||
* API in cpu/arm/common/dbg-io. It prints a stream of bytes over the
|
||||
* peripheral used by the platform.
|
||||
*/
|
||||
unsigned int dbg_send_bytes(const unsigned char *seq, unsigned int len);
|
||||
|
||||
/**
|
||||
* \brief Flushes character output
|
||||
*
|
||||
* When debugging is sent over USB, this functions causes the USB
|
||||
* driver to immediately TX the content of output buffers. When
|
||||
* debugging is over UART, this function does nothing.
|
||||
*
|
||||
* There is nothing stopping you from using this macro in your code but
|
||||
* normally, you won't have to.
|
||||
*/
|
||||
#if DBG_CONF_USB
|
||||
#define dbg_flush() usb_serial_flush()
|
||||
#else
|
||||
#define dbg_flush()
|
||||
#endif
|
||||
|
||||
#endif /* DBG_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
47
cpu/cc2538/debug-uart.h
Normal file
47
cpu/cc2538/debug-uart.h
Normal file
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-char-io
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* This file is here because DBG I/O expects it to be. It just includes
|
||||
* our own dbg.h which has a non-misleading name and which also adheres
|
||||
* to Contiki's naming convention
|
||||
*/
|
||||
#ifndef DEBUG_UART_H_
|
||||
#define DEBUG_UART_H_
|
||||
|
||||
#include "dbg.h"
|
||||
|
||||
#endif /* DEBUG_UART_H_ */
|
||||
|
||||
/** @} */
|
||||
60
cpu/cc2538/dev/ana-regs.h
Normal file
60
cpu/cc2538/dev/ana-regs.h
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rfcore
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header with declarations of ANA_REGS module registers.
|
||||
*/
|
||||
#ifndef ANA_REGS_H
|
||||
#define ANA_REGS_H
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name ANA_REGS register offsets
|
||||
* @{
|
||||
*/
|
||||
#define ANA_REGS_IVCTRL 0x00000004
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name ANA_REGS_IVCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define ANA_REGS_IVCTRL_DAC_CURR_CTRL 0x00000030 /**< Controls bias current to DAC */
|
||||
#define ANA_REGS_IVCTRL_LODIV_BIAS_CTRL 0x00000008 /**< Controls bias current to LODIV */
|
||||
#define ANA_REGS_IVCTRL_TXMIX_DC_CTRL 0x00000004 /**< Controls DC bias in TXMIX */
|
||||
#define ANA_REGS_IVCTRL_PA_BIAS_CTRL 0x00000003 /**< Controls bias current to PA */
|
||||
/** @} */
|
||||
|
||||
#endif /* ANA_REGS_H */
|
||||
/** @} */
|
||||
724
cpu/cc2538/dev/cc2538-rf.c
Normal file
724
cpu/cc2538/dev/cc2538-rf.c
Normal file
|
|
@ -0,0 +1,724 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rf
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 RF driver
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/radio.h"
|
||||
#include "sys/clock.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "net/packetbuf.h"
|
||||
#include "net/rime/rimestats.h"
|
||||
#include "net/rime/rimeaddr.h"
|
||||
#include "net/netstack.h"
|
||||
#include "sys/energest.h"
|
||||
#include "dev/cc2538-rf.h"
|
||||
#include "dev/rfcore.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "dev/udma.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define CHECKSUM_LEN 2
|
||||
|
||||
/* uDMA channel control persistent flags */
|
||||
#define UDMA_TX_FLAGS (UDMA_CHCTL_ARBSIZE_128 | UDMA_CHCTL_XFERMODE_AUTO \
|
||||
| UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_DSTSIZE_8 \
|
||||
| UDMA_CHCTL_SRCINC_8 | UDMA_CHCTL_DSTINC_NONE)
|
||||
|
||||
#define UDMA_RX_FLAGS (UDMA_CHCTL_ARBSIZE_128 | UDMA_CHCTL_XFERMODE_AUTO \
|
||||
| UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_DSTSIZE_8 \
|
||||
| UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_DSTINC_8)
|
||||
|
||||
/*
|
||||
* uDMA transfer threshold. DMA will only be used to read an incoming frame
|
||||
* if its size is above this threshold
|
||||
*/
|
||||
#define UDMA_RX_SIZE_THRESHOLD 3
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include <stdio.h>
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Local RF Flags */
|
||||
#define RX_ACTIVE 0x80
|
||||
#define RF_MUST_RESET 0x40
|
||||
#define WAS_OFF 0x10
|
||||
#define RF_ON 0x01
|
||||
|
||||
/* Bit Masks for the last byte in the RX FIFO */
|
||||
#define CRC_BIT_MASK 0x80
|
||||
#define LQI_BIT_MASK 0x7F
|
||||
/* RSSI Offset */
|
||||
#define RSSI_OFFSET 73
|
||||
|
||||
/* 192 usec off -> on interval (RX Callib -> SFD Wait). We wait a bit more */
|
||||
#define ONOFF_TIME RTIMER_ARCH_SECOND / 3125
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sniffer configuration */
|
||||
#ifndef CC2538_RF_CONF_SNIFFER_USB
|
||||
#define CC2538_RF_CONF_SNIFFER_USB 0
|
||||
#endif
|
||||
|
||||
#if CC2538_RF_CONF_SNIFFER
|
||||
static const uint8_t magic[] = { 0x53, 0x6E, 0x69, 0x66 }; /** Snif */
|
||||
|
||||
#if CC2538_RF_CONF_SNIFFER_USB
|
||||
#include "usb/usb-serial.h"
|
||||
#define write_byte(b) usb_serial_writeb(b)
|
||||
#define flush() usb_serial_flush()
|
||||
#else
|
||||
#include "dev/uart.h"
|
||||
#define write_byte(b) uart_write_byte(b)
|
||||
#define flush()
|
||||
#endif
|
||||
|
||||
#else /* CC2538_RF_CONF_SNIFFER */
|
||||
#define write_byte(b)
|
||||
#define flush()
|
||||
#endif /* CC2538_RF_CONF_SNIFFER */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifdef CC2538_RF_CONF_AUTOACK
|
||||
#define CC2538_RF_AUTOACK CC2538_RF_CONF_AUTOACK
|
||||
#else
|
||||
#define CC2538_RF_AUTOACK 1
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static uint8_t rf_flags;
|
||||
|
||||
static int on(void);
|
||||
static int off(void);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(cc2538_rf_process, "cc2538 RF driver");
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t
|
||||
cc2538_rf_channel_get()
|
||||
{
|
||||
uint8_t chan = REG(RFCORE_XREG_FREQCTRL) & RFCORE_XREG_FREQCTRL_FREQ;
|
||||
|
||||
return ((chan - CC2538_RF_CHANNEL_MIN) / CC2538_RF_CHANNEL_SPACING
|
||||
+ CC2538_RF_CHANNEL_MIN);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int8_t
|
||||
cc2538_rf_channel_set(uint8_t channel)
|
||||
{
|
||||
PRINTF("RF: Set Channel\n");
|
||||
|
||||
if((channel < CC2538_RF_CHANNEL_MIN) || (channel > CC2538_RF_CHANNEL_MAX)) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Changes to FREQCTRL take effect after the next recalibration */
|
||||
off();
|
||||
REG(RFCORE_XREG_FREQCTRL) = (CC2538_RF_CHANNEL_MIN
|
||||
+ (channel - CC2538_RF_CHANNEL_MIN) * CC2538_RF_CHANNEL_SPACING);
|
||||
on();
|
||||
|
||||
return (int8_t) channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t
|
||||
cc2538_rf_power_set(uint8_t new_power)
|
||||
{
|
||||
PRINTF("RF: Set Power\n");
|
||||
|
||||
REG(RFCORE_XREG_TXPOWER) = new_power;
|
||||
|
||||
return (REG(RFCORE_XREG_TXPOWER) & 0xFF);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* ToDo: Check once we have info on the... infopage */
|
||||
void
|
||||
cc2538_rf_set_addr(uint16_t pan)
|
||||
{
|
||||
#if RIMEADDR_SIZE==8
|
||||
/* EXT_ADDR[7:0] is ignored when using short addresses */
|
||||
int i;
|
||||
|
||||
for(i = (RIMEADDR_SIZE - 1); i >= 0; --i) {
|
||||
((uint32_t *)RFCORE_FFSM_EXT_ADDR0)[i] =
|
||||
rimeaddr_node_addr.u8[RIMEADDR_SIZE - 1 - i];
|
||||
}
|
||||
#endif
|
||||
|
||||
REG(RFCORE_FFSM_PAN_ID0) = pan & 0xFF;
|
||||
REG(RFCORE_FFSM_PAN_ID1) = pan >> 8;
|
||||
|
||||
REG(RFCORE_FFSM_SHORT_ADDR0) = rimeaddr_node_addr.u8[RIMEADDR_SIZE - 1];
|
||||
REG(RFCORE_FFSM_SHORT_ADDR1) = rimeaddr_node_addr.u8[RIMEADDR_SIZE - 2];
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Netstack API radio driver functions */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
channel_clear(void)
|
||||
{
|
||||
int cca;
|
||||
|
||||
PRINTF("RF: CCA\n");
|
||||
|
||||
/* If we are off, turn on first */
|
||||
if((REG(RFCORE_XREG_FSMSTAT0) & RFCORE_XREG_FSMSTAT0_FSM_FFCTRL_STATE) == 0) {
|
||||
rf_flags |= WAS_OFF;
|
||||
on();
|
||||
}
|
||||
|
||||
/* Wait on RSSI_VALID */
|
||||
while((REG(RFCORE_XREG_RSSISTAT) & RFCORE_XREG_RSSISTAT_RSSI_VALID) == 0);
|
||||
|
||||
if(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_CCA) {
|
||||
cca = CC2538_RF_CCA_CLEAR;
|
||||
} else {
|
||||
cca = CC2538_RF_CCA_BUSY;
|
||||
}
|
||||
|
||||
/* If we were off, turn back off */
|
||||
if((rf_flags & WAS_OFF) == WAS_OFF) {
|
||||
rf_flags &= ~WAS_OFF;
|
||||
off();
|
||||
}
|
||||
|
||||
return cca;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
on(void)
|
||||
{
|
||||
PRINTF("RF: On\n");
|
||||
|
||||
if(!(rf_flags & RX_ACTIVE)) {
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
CC2538_RF_CSP_ISRXON();
|
||||
|
||||
rf_flags |= RX_ACTIVE;
|
||||
}
|
||||
|
||||
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
off(void)
|
||||
{
|
||||
PRINTF("RF: Off\n");
|
||||
|
||||
/* Wait for ongoing TX to complete (e.g. this could be an outgoing ACK) */
|
||||
while(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE);
|
||||
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
|
||||
/* Don't turn off if we are off as this will trigger a Strobe Error */
|
||||
if(REG(RFCORE_XREG_RXENABLE) != 0) {
|
||||
CC2538_RF_CSP_ISRFOFF();
|
||||
}
|
||||
|
||||
rf_flags &= ~RX_ACTIVE;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
init(void)
|
||||
{
|
||||
PRINTF("RF: Init\n");
|
||||
|
||||
if(rf_flags & RF_ON) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Enable clock for the RF Core while Running, in Sleep and Deep Sleep */
|
||||
REG(SYS_CTRL_RCGCRFC) = 1;
|
||||
REG(SYS_CTRL_SCGCRFC) = 1;
|
||||
REG(SYS_CTRL_DCGCRFC) = 1;
|
||||
|
||||
REG(RFCORE_XREG_CCACTRL0) = CC2538_RF_CCA_THRES_USER_GUIDE;
|
||||
|
||||
/*
|
||||
* Changes from default values
|
||||
* See User Guide, section "Register Settings Update"
|
||||
*/
|
||||
REG(RFCORE_XREG_TXFILTCFG) = 0x09; /** TX anti-aliasing filter bandwidth */
|
||||
REG(RFCORE_XREG_AGCCTRL1) = 0x15; /** AGC target value */
|
||||
REG(ANA_REGS_IVCTRL) = 0x0B; /** Bias currents */
|
||||
|
||||
/*
|
||||
* Defaults:
|
||||
* Auto CRC; Append RSSI, CRC-OK and Corr. Val.; CRC calculation;
|
||||
* RX and TX modes with FIFOs
|
||||
*/
|
||||
REG(RFCORE_XREG_FRMCTRL0) = RFCORE_XREG_FRMCTRL0_AUTOCRC;
|
||||
|
||||
#if CC2538_RF_AUTOACK
|
||||
REG(RFCORE_XREG_FRMCTRL0) |= RFCORE_XREG_FRMCTRL0_AUTOACK;
|
||||
#endif
|
||||
|
||||
/* If we are a sniffer, turn off frame filtering */
|
||||
#if CC2538_RF_CONF_SNIFFER
|
||||
REG(RFCORE_XREG_FRMFILT0) &= ~RFCORE_XREG_FRMFILT0_FRAME_FILTER_EN;
|
||||
#endif
|
||||
|
||||
/* Disable source address matching and autopend */
|
||||
REG(RFCORE_XREG_SRCMATCH) = 0;
|
||||
|
||||
/* MAX FIFOP threshold */
|
||||
REG(RFCORE_XREG_FIFOPCTRL) = CC2538_RF_MAX_PACKET_LEN;
|
||||
|
||||
cc2538_rf_power_set(CC2538_RF_TX_POWER);
|
||||
cc2538_rf_channel_set(CC2538_RF_CHANNEL);
|
||||
|
||||
/* Acknowledge RF interrupts, FIFOP only */
|
||||
REG(RFCORE_XREG_RFIRQM0) |= RFCORE_XREG_RFIRQM0_FIFOP;
|
||||
nvic_interrupt_enable(NVIC_INT_RF_RXTX);
|
||||
|
||||
/* Acknowledge all RF Error interrupts */
|
||||
REG(RFCORE_XREG_RFERRM) = RFCORE_XREG_RFERRM_RFERRM;
|
||||
nvic_interrupt_enable(NVIC_INT_RF_ERR);
|
||||
|
||||
if(CC2538_RF_CONF_TX_USE_DMA) {
|
||||
/* Disable peripheral triggers for the channel */
|
||||
udma_channel_mask_set(CC2538_RF_CONF_TX_DMA_CHAN);
|
||||
|
||||
/*
|
||||
* Set the channel's DST. SRC can not be set yet since it will change for
|
||||
* each transfer
|
||||
*/
|
||||
udma_set_channel_dst(CC2538_RF_CONF_TX_DMA_CHAN, RFCORE_SFR_RFDATA);
|
||||
}
|
||||
|
||||
if(CC2538_RF_CONF_RX_USE_DMA) {
|
||||
/* Disable peripheral triggers for the channel */
|
||||
udma_channel_mask_set(CC2538_RF_CONF_RX_DMA_CHAN);
|
||||
|
||||
/*
|
||||
* Set the channel's SRC. DST can not be set yet since it will change for
|
||||
* each transfer
|
||||
*/
|
||||
udma_set_channel_src(CC2538_RF_CONF_RX_DMA_CHAN, RFCORE_SFR_RFDATA);
|
||||
}
|
||||
|
||||
process_start(&cc2538_rf_process, NULL);
|
||||
|
||||
rf_flags |= RF_ON;
|
||||
|
||||
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
||||
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
prepare(const void *payload, unsigned short payload_len)
|
||||
{
|
||||
uint8_t i;
|
||||
|
||||
PRINTF("RF: Prepare 0x%02x bytes\n", payload_len + CHECKSUM_LEN);
|
||||
|
||||
/*
|
||||
* When we transmit in very quick bursts, make sure previous transmission
|
||||
* is not still in progress before re-writing to the TX FIFO
|
||||
*/
|
||||
while(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE);
|
||||
|
||||
if((rf_flags & RX_ACTIVE) == 0) {
|
||||
on();
|
||||
}
|
||||
|
||||
CC2538_RF_CSP_ISFLUSHTX();
|
||||
|
||||
PRINTF("RF: data = ");
|
||||
/* Send the phy length byte first */
|
||||
REG(RFCORE_SFR_RFDATA) = payload_len + CHECKSUM_LEN;
|
||||
|
||||
if(CC2538_RF_CONF_TX_USE_DMA) {
|
||||
PRINTF("<uDMA payload>");
|
||||
|
||||
/* Set the transfer source's end address */
|
||||
udma_set_channel_src(CC2538_RF_CONF_TX_DMA_CHAN,
|
||||
(uint32_t)(payload) + payload_len - 1);
|
||||
|
||||
/* Configure the control word */
|
||||
udma_set_channel_control_word(CC2538_RF_CONF_TX_DMA_CHAN,
|
||||
UDMA_TX_FLAGS | udma_xfer_size(payload_len));
|
||||
|
||||
/* Enabled the RF TX uDMA channel */
|
||||
udma_channel_enable(CC2538_RF_CONF_TX_DMA_CHAN);
|
||||
|
||||
/* Trigger the uDMA transfer */
|
||||
udma_channel_sw_request(CC2538_RF_CONF_TX_DMA_CHAN);
|
||||
|
||||
/*
|
||||
* No need to wait for this to end. Even if transmit() gets called
|
||||
* immediately, the uDMA controller will stream the frame to the TX FIFO
|
||||
* faster than transmit() can empty it
|
||||
*/
|
||||
} else {
|
||||
for(i = 0; i < payload_len; i++) {
|
||||
REG(RFCORE_SFR_RFDATA) = ((unsigned char *)(payload))[i];
|
||||
PRINTF("%02x", ((unsigned char *)(payload))[i]);
|
||||
}
|
||||
}
|
||||
PRINTF("\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
transmit(unsigned short transmit_len)
|
||||
{
|
||||
uint8_t counter;
|
||||
int ret = RADIO_TX_ERR;
|
||||
rtimer_clock_t t0;
|
||||
|
||||
PRINTF("RF: Transmit\n");
|
||||
|
||||
if(!(rf_flags & RX_ACTIVE)) {
|
||||
t0 = RTIMER_NOW();
|
||||
on();
|
||||
rf_flags |= WAS_OFF;
|
||||
while(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
|
||||
}
|
||||
|
||||
if(channel_clear() == CC2538_RF_CCA_BUSY) {
|
||||
RIMESTATS_ADD(contentiondrop);
|
||||
return RADIO_TX_COLLISION;
|
||||
}
|
||||
|
||||
/*
|
||||
* prepare() double checked that TX_ACTIVE is low. If SFD is high we are
|
||||
* receiving. Abort transmission and bail out with RADIO_TX_COLLISION
|
||||
*/
|
||||
if(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_SFD) {
|
||||
RIMESTATS_ADD(contentiondrop);
|
||||
return RADIO_TX_COLLISION;
|
||||
}
|
||||
|
||||
/* Start the transmission */
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
||||
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
|
||||
|
||||
CC2538_RF_CSP_ISTXON();
|
||||
|
||||
counter = 0;
|
||||
while(!((REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE))
|
||||
&& (counter++ < 3)) {
|
||||
clock_delay_usec(6);
|
||||
}
|
||||
|
||||
if(!(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE)) {
|
||||
PRINTF("RF: TX never active.\n");
|
||||
CC2538_RF_CSP_ISFLUSHTX();
|
||||
ret = RADIO_TX_ERR;
|
||||
} else {
|
||||
/* Wait for the transmission to finish */
|
||||
while(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE);
|
||||
ret = RADIO_TX_OK;
|
||||
}
|
||||
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
|
||||
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
||||
|
||||
if(rf_flags & WAS_OFF) {
|
||||
rf_flags &= ~WAS_OFF;
|
||||
off();
|
||||
}
|
||||
|
||||
RIMESTATS_ADD(lltx);
|
||||
|
||||
return ret;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
send(const void *payload, unsigned short payload_len)
|
||||
{
|
||||
prepare(payload, payload_len);
|
||||
return transmit(payload_len);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
read(void *buf, unsigned short bufsize)
|
||||
{
|
||||
uint8_t i;
|
||||
uint8_t len;
|
||||
uint8_t crc_corr;
|
||||
int8_t rssi;
|
||||
|
||||
PRINTF("RF: Read\n");
|
||||
|
||||
if((REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_FIFOP) == 0) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Check the length */
|
||||
len = REG(RFCORE_SFR_RFDATA);
|
||||
|
||||
/* Check for validity */
|
||||
if(len > CC2538_RF_MAX_PACKET_LEN) {
|
||||
/* Oops, we must be out of sync. */
|
||||
PRINTF("RF: bad sync\n");
|
||||
|
||||
RIMESTATS_ADD(badsynch);
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
return 0;
|
||||
}
|
||||
|
||||
if(len <= CC2538_RF_MIN_PACKET_LEN) {
|
||||
PRINTF("RF: too short\n");
|
||||
|
||||
RIMESTATS_ADD(tooshort);
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
return 0;
|
||||
}
|
||||
|
||||
if(len - CHECKSUM_LEN > bufsize) {
|
||||
PRINTF("RF: too long\n");
|
||||
|
||||
RIMESTATS_ADD(toolong);
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* If we reach here, chances are the FIFO is holding a valid frame */
|
||||
PRINTF("RF: read (0x%02x bytes) = ", len);
|
||||
len -= CHECKSUM_LEN;
|
||||
|
||||
/* Don't bother with uDMA for short frames (e.g. ACKs) */
|
||||
if(CC2538_RF_CONF_RX_USE_DMA && len > UDMA_RX_SIZE_THRESHOLD) {
|
||||
PRINTF("<uDMA payload>");
|
||||
|
||||
/* Set the transfer destination's end address */
|
||||
udma_set_channel_dst(CC2538_RF_CONF_RX_DMA_CHAN,
|
||||
(uint32_t)(buf) + len - 1);
|
||||
|
||||
/* Configure the control word */
|
||||
udma_set_channel_control_word(CC2538_RF_CONF_RX_DMA_CHAN,
|
||||
UDMA_RX_FLAGS | udma_xfer_size(len));
|
||||
|
||||
/* Enabled the RF RX uDMA channel */
|
||||
udma_channel_enable(CC2538_RF_CONF_RX_DMA_CHAN);
|
||||
|
||||
/* Trigger the uDMA transfer */
|
||||
udma_channel_sw_request(CC2538_RF_CONF_RX_DMA_CHAN);
|
||||
|
||||
/* Wait for the transfer to complete. */
|
||||
while(udma_channel_get_mode(CC2538_RF_CONF_RX_DMA_CHAN));
|
||||
} else {
|
||||
for(i = 0; i < len; ++i) {
|
||||
((unsigned char *)(buf))[i] = REG(RFCORE_SFR_RFDATA);
|
||||
PRINTF("%02x", ((unsigned char *)(buf))[i]);
|
||||
}
|
||||
}
|
||||
|
||||
/* Read the RSSI and CRC/Corr bytes */
|
||||
rssi = ((int8_t)REG(RFCORE_SFR_RFDATA)) - RSSI_OFFSET;
|
||||
crc_corr = REG(RFCORE_SFR_RFDATA);
|
||||
|
||||
PRINTF("%02x%02x\n", (uint8_t)rssi, crc_corr);
|
||||
|
||||
/* MS bit CRC OK/Not OK, 7 LS Bits, Correlation value */
|
||||
if(crc_corr & CRC_BIT_MASK) {
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, rssi);
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, crc_corr & LQI_BIT_MASK);
|
||||
RIMESTATS_ADD(llrx);
|
||||
} else {
|
||||
RIMESTATS_ADD(badcrc);
|
||||
PRINTF("RF: Bad CRC\n");
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if CC2538_RF_CONF_SNIFFER
|
||||
write_byte(magic[0]);
|
||||
write_byte(magic[1]);
|
||||
write_byte(magic[2]);
|
||||
write_byte(magic[3]);
|
||||
write_byte(len + 2);
|
||||
for(i = 0; i < len; ++i) {
|
||||
write_byte(((unsigned char *)(buf))[i]);
|
||||
}
|
||||
write_byte(rssi);
|
||||
write_byte(crc_corr);
|
||||
flush();
|
||||
#endif
|
||||
|
||||
/* If FIFOP==1 and FIFO==0 then we had a FIFO overflow at some point. */
|
||||
if(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_FIFOP) {
|
||||
if(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_FIFO) {
|
||||
process_poll(&cc2538_rf_process);
|
||||
} else {
|
||||
CC2538_RF_CSP_ISFLUSHRX();
|
||||
}
|
||||
}
|
||||
|
||||
return (len);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
receiving_packet(void)
|
||||
{
|
||||
PRINTF("RF: Receiving\n");
|
||||
|
||||
/*
|
||||
* SFD high while transmitting and receiving.
|
||||
* TX_ACTIVE high only when transmitting
|
||||
*
|
||||
* FSMSTAT1 & (TX_ACTIVE | SFD) == SFD <=> receiving
|
||||
*/
|
||||
return ((REG(RFCORE_XREG_FSMSTAT1)
|
||||
& (RFCORE_XREG_FSMSTAT1_TX_ACTIVE | RFCORE_XREG_FSMSTAT1_SFD))
|
||||
== RFCORE_XREG_FSMSTAT1_SFD);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
pending_packet(void)
|
||||
{
|
||||
PRINTF("RF: Pending\n");
|
||||
|
||||
return (REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_FIFOP);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
const struct radio_driver cc2538_rf_driver = {
|
||||
init,
|
||||
prepare,
|
||||
transmit,
|
||||
send,
|
||||
read,
|
||||
channel_clear,
|
||||
receiving_packet,
|
||||
pending_packet,
|
||||
on,
|
||||
off,
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Implementation of the cc2538 RF driver process
|
||||
*
|
||||
* This process is started by init(). It simply sits there waiting for
|
||||
* an event. Upon frame reception, the RX ISR will poll this process.
|
||||
* Subsequently, the contiki core will generate an event which will
|
||||
* call this process so that the received frame can be picked up from
|
||||
* the RF RX FIFO
|
||||
*
|
||||
*/
|
||||
PROCESS_THREAD(cc2538_rf_process, ev, data)
|
||||
{
|
||||
int len;
|
||||
PROCESS_BEGIN();
|
||||
|
||||
while(1) {
|
||||
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
|
||||
|
||||
packetbuf_clear();
|
||||
len = read(packetbuf_dataptr(), PACKETBUF_SIZE);
|
||||
|
||||
if(len > 0) {
|
||||
packetbuf_set_datalen(len);
|
||||
|
||||
NETSTACK_RDC.input();
|
||||
}
|
||||
|
||||
/* If we were polled due to an RF error, reset the transceiver */
|
||||
if(rf_flags & RF_MUST_RESET) {
|
||||
rf_flags = 0;
|
||||
|
||||
off();
|
||||
init();
|
||||
}
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief The cc2538 RF RX/TX ISR
|
||||
*
|
||||
* This is the interrupt service routine for all RF interrupts relating
|
||||
* to RX and TX. Error conditions are handled by cc2538_rf_err_isr().
|
||||
* Currently, we only acknowledge the FIFOP interrupt source.
|
||||
*/
|
||||
void
|
||||
cc2538_rf_rx_tx_isr(void)
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
process_poll(&cc2538_rf_process);
|
||||
|
||||
/* We only acknowledge FIFOP so we can safely wipe out the entire SFR */
|
||||
REG(RFCORE_SFR_RFIRQF0) = 0;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief The cc2538 RF Error ISR
|
||||
*
|
||||
* This is the interrupt service routine for all RF errors. We
|
||||
* acknowledge every error type and instead of trying to be smart and
|
||||
* act differently depending on error condition, we simply reset the
|
||||
* transceiver. RX FIFO overflow is an exception, we ignore this error
|
||||
* since read() handles it anyway.
|
||||
*
|
||||
* However, we don't want to reset within this ISR. If the error occurs
|
||||
* while we are reading a frame out of the FIFO, trashing the FIFO in
|
||||
* the middle of read(), would result in further errors (RX underflows).
|
||||
*
|
||||
* Instead, we set a flag and poll the driver process. The process will
|
||||
* reset the transceiver without any undesirable consequences.
|
||||
*/
|
||||
void
|
||||
cc2538_rf_err_isr(void)
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
PRINTF("RF Error: 0x%08lx\n", REG(RFCORE_SFR_RFERRF));
|
||||
|
||||
/* If the error is not an RX FIFO overflow, set a flag */
|
||||
if(REG(RFCORE_SFR_RFERRF) != RFCORE_SFR_RFERRF_RXOVERF) {
|
||||
rf_flags |= RF_MUST_RESET;
|
||||
}
|
||||
|
||||
REG(RFCORE_SFR_RFERRF) = 0;
|
||||
|
||||
process_poll(&cc2538_rf_process);
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
176
cpu/cc2538/dev/cc2538-rf.h
Normal file
176
cpu/cc2538/dev/cc2538-rf.h
Normal file
|
|
@ -0,0 +1,176 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* This file is part of the Contiki operating system.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-rf cc2538 RF Driver
|
||||
*
|
||||
* Driver implementation for the cc2538 RF transceiver
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538 RF driver
|
||||
*/
|
||||
#ifndef CC2538_RF_H__
|
||||
#define CC2538_RF_H__
|
||||
|
||||
#include "contiki.h"
|
||||
#include "dev/radio.h"
|
||||
#include "dev/rfcore.h"
|
||||
#include "reg.h"
|
||||
/*---------------------------------------------------------------------------
|
||||
* RF Config
|
||||
*---------------------------------------------------------------------------*/
|
||||
/* Constants */
|
||||
#define CC2538_RF_CCA_THRES_USER_GUIDE 0xF8
|
||||
#define CC2538_RF_TX_POWER_RECOMMENDED 0xD5 /* ToDo: Determine value */
|
||||
#define CC2538_RF_CHANNEL_MIN 11
|
||||
#define CC2538_RF_CHANNEL_MAX 26
|
||||
#define CC2538_RF_CHANNEL_SPACING 5
|
||||
#define CC2538_RF_MAX_PACKET_LEN 127
|
||||
#define CC2538_RF_MIN_PACKET_LEN 4
|
||||
#define CC2538_RF_CCA_CLEAR 1
|
||||
#define CC2538_RF_CCA_BUSY 0
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifdef CC2538_RF_CONF_TX_POWER
|
||||
#define CC2538_RF_TX_POWER CC2538_RF_CONF_TX_POWER
|
||||
#else
|
||||
#define CC2538_RF_TX_POWER CC2538_RF_TX_POWER_RECOMMENDED
|
||||
#endif /* CC2538_RF_CONF_TX_POWER */
|
||||
|
||||
#ifdef CC2538_RF_CONF_CCA_THRES
|
||||
#define CC2538_RF_CCA_THRES CC2538_RF_CONF_CCA_THRES
|
||||
#else
|
||||
#define CC2538_RF_CCA_THRES CCA_THRES_USER_GUIDE /** User guide recommendation */
|
||||
#endif /* CC2538_RF_CONF_CCA_THRES */
|
||||
|
||||
#ifdef CC2538_RF_CONF_CHANNEL
|
||||
#define CC2538_RF_CHANNEL CC2538_RF_CONF_CHANNEL
|
||||
#else
|
||||
#define CC2538_RF_CHANNEL 18
|
||||
#endif /* CC2538_RF_CONF_CHANNEL */
|
||||
|
||||
#ifdef CC2538_RF_CONF_AUTOACK
|
||||
#define CC2538_RF_AUTOACK CC2538_RF_CONF_AUTOACK
|
||||
#else
|
||||
#define CC2538_RF_AUTOACK 1
|
||||
#endif /* CC2538_RF_CONF_AUTOACK */
|
||||
/*---------------------------------------------------------------------------
|
||||
* Command Strobe Processor
|
||||
*---------------------------------------------------------------------------*/
|
||||
/* OPCODES */
|
||||
#define CC2538_RF_CSP_OP_ISRXON 0xE3
|
||||
#define CC2538_RF_CSP_OP_ISTXON 0xE9
|
||||
#define CC2538_RF_CSP_OP_ISTXONCCA 0xEA
|
||||
#define CC2538_RF_CSP_OP_ISRFOFF 0xEF
|
||||
#define CC2538_RF_CSP_OP_ISFLUSHRX 0xED
|
||||
#define CC2538_RF_CSP_OP_ISFLUSHTX 0xEE
|
||||
|
||||
/**
|
||||
* \brief Send an RX ON command strobe to the CSP
|
||||
*/
|
||||
#define CC2538_RF_CSP_ISRXON() \
|
||||
do { REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISRXON; } while(0)
|
||||
|
||||
/**
|
||||
* \brief Send a TX ON command strobe to the CSP
|
||||
*/
|
||||
#define CC2538_RF_CSP_ISTXON() \
|
||||
do { REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISTXON; } while(0)
|
||||
|
||||
/**
|
||||
* \brief Send a RF OFF command strobe to the CSP
|
||||
*/
|
||||
#define CC2538_RF_CSP_ISRFOFF() \
|
||||
do { REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISRFOFF; } while(0)
|
||||
|
||||
/**
|
||||
* \brief Flush the RX FIFO
|
||||
*/
|
||||
#define CC2538_RF_CSP_ISFLUSHRX() do { \
|
||||
REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISFLUSHRX; \
|
||||
REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISFLUSHRX; \
|
||||
} while(0)
|
||||
|
||||
/**
|
||||
* \brief Flush the TX FIFO
|
||||
*/
|
||||
#define CC2538_RF_CSP_ISFLUSHTX() do { \
|
||||
REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISFLUSHTX; \
|
||||
REG(RFCORE_SFR_RFST) = CC2538_RF_CSP_OP_ISFLUSHTX; \
|
||||
} while(0)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** The NETSTACK data structure for the cc2538 RF driver */
|
||||
extern const struct radio_driver cc2538_rf_driver;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Set the current operating channel
|
||||
* \param channel The desired channel as a value in [11,26]
|
||||
* \return Returns a value in [11,26] representing the current channel
|
||||
* or a negative value if \e channel was out of bounds
|
||||
*/
|
||||
int8_t cc2538_rf_channel_set(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Get the current operating channel
|
||||
* \return Returns a value in [11,26] representing the current channel
|
||||
*/
|
||||
uint8_t cc2538_rf_channel_get();
|
||||
|
||||
/**
|
||||
* \brief Sets RF TX power
|
||||
* \param new_power The desired power level
|
||||
* \return The power level in use after the adjustment
|
||||
*
|
||||
* The value specified in \e new_power will be written directly to the
|
||||
* RFCORE_XREG_TXPOWER register. See the datasheet for more details on
|
||||
* possible values.
|
||||
*/
|
||||
uint8_t cc2538_rf_power_set(uint8_t new_power);
|
||||
|
||||
/**
|
||||
* \brief Sets addresses and PAN identifier to the relevant RF hardware
|
||||
* registers
|
||||
* \param pan The PAN Identifier
|
||||
*
|
||||
* Values for short and extended addresses are not needed as parameters
|
||||
* since they exist in the rimeaddr buffer in the contiki core. They
|
||||
* are thus simply copied over from there.
|
||||
*/
|
||||
void cc2538_rf_set_addr(uint16_t pan);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* CC2538_RF_H__ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
147
cpu/cc2538/dev/gpio.c
Normal file
147
cpu/cc2538/dev/gpio.c
Normal file
|
|
@ -0,0 +1,147 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-gpio
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 GPIO controller
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/energest.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/gpio.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "reg.h"
|
||||
#include "lpm.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
/**
|
||||
* \brief Pointer to a function to be called when a GPIO interrupt is detected.
|
||||
* Callbacks for Port A, Pins[0:7] are stored in positions [0:7] of this
|
||||
* buffer, Port B callbacks in [8:15] and so on
|
||||
*/
|
||||
static gpio_callback_t gpio_callbacks[32];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
gpio_register_callback(gpio_callback_t f, uint8_t port, uint8_t pin)
|
||||
{
|
||||
gpio_callbacks[(port << 3) + pin] = f;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Run through all registered GPIO callbacks and invoke those
|
||||
* associated with the \a port and the pins specified by \a mask
|
||||
* \param mask Search callbacks associated with pins specified by this mask
|
||||
* \param port Search callbacks associated with this port. Here, port is
|
||||
* specified as a number between 0 and 3. Port A: 0, Port B: 1 etc */
|
||||
void
|
||||
notify(uint8_t mask, uint8_t port)
|
||||
{
|
||||
uint8_t i;
|
||||
gpio_callback_t *f = &gpio_callbacks[port << 3];
|
||||
|
||||
for(i = 0; i < 8; i++) {
|
||||
if(mask & (1 << i)) {
|
||||
if((*f) != NULL) {
|
||||
(*f)(port, i);
|
||||
}
|
||||
}
|
||||
f++;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Interrupt service routine for Port A */
|
||||
void
|
||||
gpio_port_a_isr()
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
lpm_exit();
|
||||
|
||||
notify(REG(GPIO_A_BASE | GPIO_MIS), GPIO_A_NUM);
|
||||
|
||||
REG(GPIO_A_BASE | GPIO_IC) = 0xFF;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Interrupt service routine for Port B */
|
||||
void
|
||||
gpio_port_b_isr()
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
lpm_exit();
|
||||
|
||||
notify(REG(GPIO_B_BASE | GPIO_MIS), GPIO_B_NUM);
|
||||
|
||||
REG(GPIO_B_BASE | GPIO_IC) = 0xFF;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Interrupt service routine for Port C */
|
||||
void
|
||||
gpio_port_c_isr()
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
lpm_exit();
|
||||
|
||||
notify(REG(GPIO_C_BASE | GPIO_MIS), GPIO_C_NUM);
|
||||
|
||||
REG(GPIO_C_BASE | GPIO_IC) = 0xFF;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Interrupt service routine for Port D */
|
||||
void
|
||||
gpio_port_d_isr()
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
lpm_exit();
|
||||
|
||||
notify(REG(GPIO_D_BASE | GPIO_MIS), GPIO_D_NUM);
|
||||
|
||||
REG(GPIO_D_BASE | GPIO_IC) = 0xFF;
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
gpio_init()
|
||||
{
|
||||
memset(gpio_callbacks, 0, sizeof(gpio_callbacks));
|
||||
}
|
||||
/** @} */
|
||||
479
cpu/cc2538/dev/gpio.h
Normal file
479
cpu/cc2538/dev/gpio.h
Normal file
|
|
@ -0,0 +1,479 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-gpio cc2538 General-Purpose I/O
|
||||
*
|
||||
* Driver for the cc2538 GPIO controller
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register and macro declarations for the cc2538 GPIO module
|
||||
*/
|
||||
#ifndef GPIO_H_
|
||||
#define GPIO_H_
|
||||
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/**
|
||||
* \brief Type definition for callbacks invoked by the GPIO ISRs
|
||||
* \param port The port that triggered the GPIO interrupt. \e port is passed
|
||||
* by its numeric representation (Port A:0, B:1 etc). Defines for
|
||||
* these numeric representations are GPIO_x_NUM
|
||||
* \param pin The pin that triggered the interrupt, specified by number
|
||||
* (0, 1, ..., 7)
|
||||
*
|
||||
* This is the prototype of a function pointer passed to
|
||||
* gpio_register_callback(). These callbacks are registered on a port/pin
|
||||
* basis. When a GPIO port generates an interrupt, if a callback has been
|
||||
* registered for the port/pin combination, the ISR will invoke it. The ISR
|
||||
* will pass the port/pin as arguments in that call, so that a developer can
|
||||
* re-use the same callback for multiple port/pin combinations
|
||||
*/
|
||||
typedef void (* gpio_callback_t)(uint8_t port, uint8_t pin);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Base addresses for the GPIO register instances
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_A_BASE 0x400D9000 /**< GPIO_A */
|
||||
#define GPIO_B_BASE 0x400DA000 /**< GPIO_B */
|
||||
#define GPIO_C_BASE 0x400DB000 /**< GPIO_C */
|
||||
#define GPIO_D_BASE 0x400DC000 /**< GPIO_D */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Numeric representation of the four GPIO ports
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_A_NUM 0 /**< GPIO_A: 0 */
|
||||
#define GPIO_B_NUM 1 /**< GPIO_B: 1 */
|
||||
#define GPIO_C_NUM 2 /**< GPIO_C: 2 */
|
||||
#define GPIO_D_NUM 3 /**< GPIO_D: 3 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name GPIO Manipulation macros
|
||||
* @{
|
||||
*/
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to input.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_SET_INPUT(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_DIR) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to output.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_SET_OUTPUT(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_DIR) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to detect edge.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_DETECT_EDGE(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IS) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to detect level.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_DETECT_LEVEL(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IS) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to trigger an
|
||||
* interrupt on both edges.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_TRIGGER_BOTH_EDGES(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IBE) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to trigger an
|
||||
* interrupt on single edge (controlled by GPIO_IEV).
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_TRIGGER_SINGLE_EDGE(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IBE) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to trigger an
|
||||
* interrupt on rising edge.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_DETECT_RISING(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IEV) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Set pins with PIN_MASK of port with PORT_BASE to trigger an
|
||||
* interrupt on falling edge.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_DETECT_FALLING(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IEV) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Enable interrupt triggering for pins with PIN_MASK of port with
|
||||
* PORT_BASE.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_ENABLE_INTERRUPT(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IE) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Disable interrupt triggering for pins with PIN_MASK of port with
|
||||
* PORT_BASE.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_DISABLE_INTERRUPT(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_IE) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Enable interrupt triggering for pins with PIN_MASK of port with
|
||||
* PORT_BASE.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_PERIPHERAL_CONTROL(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_AFSEL) |= PIN_MASK; } while(0)
|
||||
|
||||
/** \brief Disable interrupt triggering for pins with PIN_MASK of port with
|
||||
* PORT_BASE.
|
||||
* \param PORT_BASE GPIO Port register offset
|
||||
* \param PIN_MASK Pin number mask. Pin 0: 0x01, Pin 1: 0x02 ... Pin 7: 0x80
|
||||
*/
|
||||
#define GPIO_SOFTWARE_CONTROL(PORT_BASE, PIN_MASK) \
|
||||
do { REG(PORT_BASE | GPIO_AFSEL) &= ~PIN_MASK; } while(0)
|
||||
|
||||
/**
|
||||
* \brief Converts a pin number to a pin mask
|
||||
* \param The pin number in the range [0..7]
|
||||
* \return A pin mask which can be used as the PIN_MASK argument of the macros
|
||||
* in this category
|
||||
*/
|
||||
#define GPIO_PIN_MASK(PIN) (1 << PIN)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO Register offset declarations
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_DATA 0x00000000 /**< Data register */
|
||||
#define GPIO_DIR 0x00000400 /**< Data direction register */
|
||||
#define GPIO_IS 0x00000404 /**< Interrupt sense */
|
||||
#define GPIO_IBE 0x00000408 /**< Interrupt both edges */
|
||||
#define GPIO_IEV 0x0000040C /**< Interrupt event */
|
||||
#define GPIO_IE 0x00000410 /**< Interrupt mask */
|
||||
#define GPIO_RIS 0x00000414 /**< Interrupt status - raw */
|
||||
#define GPIO_MIS 0x00000418 /**< Interrupt status - masked */
|
||||
#define GPIO_IC 0x0000041C /**< Interrupt clear */
|
||||
#define GPIO_AFSEL 0x00000420 /**< Mode control select */
|
||||
#define GPIO_GPIOLOCK 0x00000520 /**< GPIO commit unlock */
|
||||
#define GPIO_GPIOCR 0x00000524 /**< GPIO commit */
|
||||
#define GPIO_PMUX 0x00000700 /**< PMUX register */
|
||||
#define GPIO_P_EDGE_CTRL 0x00000704 /**< Port edge control */
|
||||
#define GPIO_USB_CTRL 0x00000708 /**< USB input power-up edge ctrl */
|
||||
#define GPIO_PI_IEN 0x00000710 /**< Power-up interrupt enable */
|
||||
#define GPIO_IRQ_DETECT_ACK 0x00000718 /**< IRQ detect ACK - I/O ports */
|
||||
#define GPIO_USB_IRQ_ACK 0x0000071C /**< IRQ detect ACK - USB */
|
||||
#define GPIO_IRQ_DETECT_UNMASK 0x00000720 /**< IRQ detect ACK - masked */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_DATA register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_DATA_DATA 0x000000FF /**< Input and output data */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_DIR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_DIR_DIR 0x000000FF /**< Pin Input (0) / Output (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IS_IS 0x000000FF /**< Detect Edge (0) / Level (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IBE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IBE_IBE 0x000000FF /**< Both Edges (1) / Single (0) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IEV register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IEV_IEV 0x000000FF /**< Rising (1) / Falling (0) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IE_IE 0x000000FF /**< Masked (0) / Not Masked (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_RIS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_RIS_RIS 0x000000FF /**< Raw interrupt status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_MIS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MIS_MIS 0x000000FF /**< Masked interrupt status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IC register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IC_IC 0x000000FF /**< Clear edge detection (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_AFSEL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_AFSEL_AFSEL 0x000000FF /**< Software (0) / Peripheral (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_GPIOLOCK register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_GPIOLOCK_LOCK 0xFFFFFFFF /**< Locked (1) / Unlocked (0) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_GPIOCR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_GPIOCR_CR 0x000000FF /**< Allow alternate function (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_PMUX register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PMUX_CKOEN 0x00000080 /**< Clock out enable */
|
||||
#define GPIO_PMUX_CKOPIN 0x00000010 /**< Decouple control pin select */
|
||||
#define GPIO_PMUX_DCEN 0x00000008 /**< Decouple control enable */
|
||||
#define GPIO_PMUX_DCPIN 0x00000001 /**< Decouple control pin select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_P_EDGE_CTRL register bit masks.
|
||||
* \brief Rising (0) / Falling (1)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC7 0x80000000 /**< Port D bit 7 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC6 0x40000000 /**< Port D bit 6 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC5 0x20000000 /**< Port D bit 5 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC4 0x10000000 /**< Port D bit 4 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC3 0x08000000 /**< Port D bit 3 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC2 0x04000000 /**< Port D bit 2 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC1 0x02000000 /**< Port D bit 1 */
|
||||
#define GPIO_P_EDGE_CTRL_PDIRC0 0x01000000 /**< Port D bit 0 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC7 0x00800000 /**< Port C bit 7 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC6 0x00400000 /**< Port C bit 6 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC5 0x00200000 /**< Port C bit 5 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC4 0x00100000 /**< Port C bit 4 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC3 0x00080000 /**< Port C bit 3 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC2 0x00040000 /**< Port C bit 2 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC1 0x00020000 /**< Port C bit 1 */
|
||||
#define GPIO_P_EDGE_CTRL_PCIRC0 0x00010000 /**< Port C bit 0 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC7 0x00008000 /**< Port B bit 7 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC6 0x00004000 /**< Port B bit 6 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC5 0x00002000 /**< Port B bit 5 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC4 0x00001000 /**< Port B bit 4 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC3 0x00000800 /**< Port B bit 3 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC2 0x00000400 /**< Port B bit 2 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC1 0x00000200 /**< Port B bit 1 */
|
||||
#define GPIO_P_EDGE_CTRL_PBIRC0 0x00000100 /**< Port B bit 0 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC7 0x00000080 /**< Port A bit 7 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC6 0x00000040 /**< Port A bit 6 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC5 0x00000020 /**< Port A bit 5 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC4 0x00000010 /**< Port A bit 4 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC3 0x00000008 /**< Port A bit 3 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC2 0x00000004 /**< Port A bit 2 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC1 0x00000002 /**< Port A bit 1 */
|
||||
#define GPIO_P_EDGE_CTRL_PAIRC0 0x00000001 /**< Port A bit 0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_USB_CTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_USB_CTRL_USB_EDGE_CTL 0x00000001 /**< Rising (0) / Falling (1) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_PI_IEN register bit masks.
|
||||
* \brief Enabled (1) / Disabled (0)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PI_IEN_PDIEN7 0x80000000 /**< Port D bit 7 */
|
||||
#define GPIO_PI_IEN_PDIEN6 0x40000000 /**< Port D bit 6 */
|
||||
#define GPIO_PI_IEN_PDIEN5 0x20000000 /**< Port D bit 5 */
|
||||
#define GPIO_PI_IEN_PDIEN4 0x10000000 /**< Port D bit 4 */
|
||||
#define GPIO_PI_IEN_PDIEN3 0x08000000 /**< Port D bit 3 */
|
||||
#define GPIO_PI_IEN_PDIEN2 0x04000000 /**< Port D bit 2 */
|
||||
#define GPIO_PI_IEN_PDIEN1 0x02000000 /**< Port D bit 1 */
|
||||
#define GPIO_PI_IEN_PDIEN0 0x01000000 /**< Port D bit 0 */
|
||||
#define GPIO_PI_IEN_PCIEN7 0x00800000 /**< Port C bit 7 */
|
||||
#define GPIO_PI_IEN_PCIEN6 0x00400000 /**< Port C bit 6 */
|
||||
#define GPIO_PI_IEN_PCIEN5 0x00200000 /**< Port C bit 5 */
|
||||
#define GPIO_PI_IEN_PCIEN4 0x00100000 /**< Port C bit 4 */
|
||||
#define GPIO_PI_IEN_PCIEN3 0x00080000 /**< Port C bit 3 */
|
||||
#define GPIO_PI_IEN_PCIEN2 0x00040000 /**< Port C bit 2 */
|
||||
#define GPIO_PI_IEN_PCIEN1 0x00020000 /**< Port C bit 1 */
|
||||
#define GPIO_PI_IEN_PCIEN0 0x00010000 /**< Port C bit 0 */
|
||||
#define GPIO_PI_IEN_PBIEN7 0x00008000 /**< Port B bit 7 */
|
||||
#define GPIO_PI_IEN_PBIEN6 0x00004000 /**< Port B bit 6 */
|
||||
#define GPIO_PI_IEN_PBIEN5 0x00002000 /**< Port B bit 5 */
|
||||
#define GPIO_PI_IEN_PBIEN4 0x00001000 /**< Port B bit 4 */
|
||||
#define GPIO_PI_IEN_PBIEN3 0x00000800 /**< Port B bit 3 */
|
||||
#define GPIO_PI_IEN_PBIEN2 0x00000400 /**< Port B bit 2 */
|
||||
#define GPIO_PI_IEN_PBIEN1 0x00000200 /**< Port B bit 1 */
|
||||
#define GPIO_PI_IEN_PBIEN0 0x00000100 /**< Port B bit 0 */
|
||||
#define GPIO_PI_IEN_PAIEN7 0x00000080 /**< Port A bit 7 */
|
||||
#define GPIO_PI_IEN_PAIEN6 0x00000040 /**< Port A bit 6 */
|
||||
#define GPIO_PI_IEN_PAIEN5 0x00000020 /**< Port A bit 5 */
|
||||
#define GPIO_PI_IEN_PAIEN4 0x00000010 /**< Port A bit 4 */
|
||||
#define GPIO_PI_IEN_PAIEN3 0x00000008 /**< Port A bit 3 */
|
||||
#define GPIO_PI_IEN_PAIEN2 0x00000004 /**< Port A bit 2 */
|
||||
#define GPIO_PI_IEN_PAIEN1 0x00000002 /**< Port A bit 1 */
|
||||
#define GPIO_PI_IEN_PAIEN0 0x00000001 /**< Port A bit 0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IRQ_DETECT_ACK register bit masks
|
||||
* \brief Detected (1) / Undetected (0)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK7 0x80000000 /**< Port D bit 7 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK6 0x40000000 /**< Port D bit 6 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK5 0x20000000 /**< Port D bit 5 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK4 0x10000000 /**< Port D bit 4 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK3 0x08000000 /**< Port D bit 3 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK2 0x04000000 /**< Port D bit 2 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK1 0x02000000 /**< Port D bit 1 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PDIACK0 0x01000000 /**< Port D bit 0 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK7 0x00800000 /**< Port C bit 7 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK6 0x00400000 /**< Port C bit 6 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK5 0x00200000 /**< Port C bit 5 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK4 0x00100000 /**< Port C bit 4 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK3 0x00080000 /**< Port C bit 3 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK2 0x00040000 /**< Port C bit 2 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK1 0x00020000 /**< Port C bit 1 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PCIACK0 0x00010000 /**< Port C bit 0 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK7 0x00008000 /**< Port B bit 7 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK6 0x00004000 /**< Port B bit 6 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK5 0x00002000 /**< Port B bit 5 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK4 0x00001000 /**< Port B bit 4 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK3 0x00000800 /**< Port B bit 3 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK2 0x00000400 /**< Port B bit 2 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK1 0x00000200 /**< Port B bit 1 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PBIACK0 0x00000100 /**< Port B bit 0 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK7 0x00000080 /**< Port A bit 7 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK6 0x00000040 /**< Port A bit 6 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK5 0x00000020 /**< Port A bit 5 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK4 0x00000010 /**< Port A bit 4 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK3 0x00000008 /**< Port A bit 3 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK2 0x00000004 /**< Port A bit 2 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK1 0x00000002 /**< Port A bit 1 */
|
||||
#define GPIO_IRQ_DETECT_ACK_PAIACK0 0x00000001 /**< Port A bit 0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_USB_IRQ_ACK register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_USB_IRQ_ACK_USBACK 0x00000001 /**< Detected (1) / Not detected (0) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPIO_IRQ_DETECT_UNMASK register bit masks.
|
||||
* \brief Detected (1) / Not detected (0)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK7 0x80000000 /**< Port D bit 7 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK6 0x40000000 /**< Port D bit 6 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK5 0x20000000 /**< Port D bit 5 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK4 0x10000000 /**< Port D bit 4 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK3 0x08000000 /**< Port D bit 3 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK2 0x04000000 /**< Port D bit 2 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK1 0x02000000 /**< Port D bit 1 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PDIACK0 0x01000000 /**< Port D bit 0 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK7 0x00800000 /**< Port C bit 7 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK6 0x00400000 /**< Port C bit 6 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK5 0x00200000 /**< Port C bit 5 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK4 0x00100000 /**< Port C bit 4 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK3 0x00080000 /**< Port C bit 3 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK2 0x00040000 /**< Port C bit 2 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK1 0x00020000 /**< Port C bit 1 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PCIACK0 0x00010000 /**< Port C bit 0 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK7 0x00008000 /**< Port B bit 7 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK6 0x00004000 /**< Port B bit 6 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK5 0x00002000 /**< Port B bit 5 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK4 0x00001000 /**< Port B bit 4 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK3 0x00000800 /**< Port B bit 3 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK2 0x00000400 /**< Port B bit 2 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK1 0x00000200 /**< Port B bit 1 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PBIACK0 0x00000100 /**< Port B bit 0 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK7 0x00000080 /**< Port A bit 7 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK6 0x00000040 /**< Port A bit 6 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK5 0x00000020 /**< Port A bit 5 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK4 0x00000010 /**< Port A bit 4 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK3 0x00000008 /**< Port A bit 3 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK2 0x00000004 /**< Port A bit 2 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK1 0x00000002 /**< Port A bit 1 */
|
||||
#define GPIO_IRQ_DETECT_UNMASK_PAIACK0 0x00000001 /**< Port A bit 0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Initialise the GPIO module */
|
||||
void gpio_init();
|
||||
|
||||
/**
|
||||
* \brief Register GPIO callback
|
||||
* \param f Pointer to a function to be called when \a pin of \a port
|
||||
* generates an interrupt
|
||||
* \param port Associate \a f with this port. \e port must be specified with
|
||||
* its numeric representation (Port A:0, B:1 etc). Defines for these
|
||||
* numeric representations are GPIO_x_NUM
|
||||
* \param pin Associate \a f with this pin, which is specified by number
|
||||
* (0, 1, ..., 7)
|
||||
*/
|
||||
void gpio_register_callback(gpio_callback_t f, uint8_t port, uint8_t pin);
|
||||
|
||||
#endif /* GPIO_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
335
cpu/cc2538/dev/gptimer.h
Normal file
335
cpu/cc2538/dev/gptimer.h
Normal file
|
|
@ -0,0 +1,335 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-gptimer cc2538 General-Purpose Timers
|
||||
*
|
||||
* Driver for the cc2538 General Purpose Timers
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538 General Purpose Timers
|
||||
*/
|
||||
#ifndef GPTIMER_H_
|
||||
#define GPTIMER_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Base addresses for the GPT register instances
|
||||
* @{
|
||||
*/
|
||||
#define GPT_0_BASE 0x40030000 /**< GPTIMER0 */
|
||||
#define GPT_1_BASE 0x40031000 /**< GPTIMER1 */
|
||||
#define GPT_2_BASE 0x40032000 /**< GPTIMER2 */
|
||||
#define GPT_3_BASE 0x40033000 /**< GPTIMER3 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER Register offset declarations
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_CFG 0x00000000 /**< GPTM configuration */
|
||||
#define GPTIMER_TAMR 0x00000004 /**< GPTM Timer A mode */
|
||||
#define GPTIMER_TBMR 0x00000008 /**< GPTM Timer B mode */
|
||||
#define GPTIMER_CTL 0x0000000C /**< GPTM control */
|
||||
#define GPTIMER_SYNC 0x00000010 /**< GPTM synchronize (0 only) */
|
||||
#define GPTIMER_IMR 0x00000018 /**< GPTM interrupt mask */
|
||||
#define GPTIMER_RIS 0x0000001C /**< GPTM raw interrupt status */
|
||||
#define GPTIMER_MIS 0x00000020 /**< GPTM masked interrupt status */
|
||||
#define GPTIMER_ICR 0x00000024 /**< GPTM interrupt clear */
|
||||
#define GPTIMER_TAILR 0x00000028 /**< GPTM Timer A interval load */
|
||||
#define GPTIMER_TBILR 0x0000002C /**< GPTM Timer B interval load */
|
||||
#define GPTIMER_TAMATCHR 0x00000030 /**< GPTM Timer A match */
|
||||
#define GPTIMER_TBMATCHR 0x00000034 /**< GPTM Timer B match */
|
||||
#define GPTIMER_TAPR 0x00000038 /**< GPTM Timer A prescale */
|
||||
#define GPTIMER_TBPR 0x0000003C /**< GPTM Timer B prescale */
|
||||
#define GPTIMER_TAPMR 0x00000040 /**< GPTM Timer A prescale match */
|
||||
#define GPTIMER_TBPMR 0x00000044 /**< GPTM Timer B prescale match */
|
||||
#define GPTIMER_TAR 0x00000048 /**< GPTM Timer A */
|
||||
#define GPTIMER_TBR 0x0000004C /**< GPTM Timer B */
|
||||
#define GPTIMER_TAV 0x00000050 /**< GPTM Timer A value */
|
||||
#define GPTIMER_TBV 0x00000054 /**< GPTM Timer B value */
|
||||
#define GPTIMER_RTCPD 0x00000058 /**< GPTM RTC predivide */
|
||||
#define GPTIMER_TAPS 0x0000005C /**< GPTM Timer A prescale snapshot */
|
||||
#define GPTIMER_TBPS 0x00000060 /**< GPTM Timer B prescale snapshot */
|
||||
#define GPTIMER_TAPV 0x00000064 /**< GPTM Timer A prescale value */
|
||||
#define GPTIMER_TBPV 0x00000068 /**< GPTM Timer B prescale value */
|
||||
#define GPTIMER_PP 0x00000FC0 /**< GPTM peripheral properties */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_CFG register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_CFG_GPTMCFG 0x00000007 /**< configuration */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TnMR bit values
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAMR_TAMR_ONE_SHOT 0x00000001
|
||||
#define GPTIMER_TAMR_TAMR_PERIODIC 0x00000002
|
||||
#define GPTIMER_TAMR_TAMR_CAPTURE 0x00000003
|
||||
#define GPTIMER_TBMR_TBMR_ONE_SHOT 0x00000001
|
||||
#define GPTIMER_TBMR_TBMR_PERIODIC 0x00000002
|
||||
#define GPTIMER_TBMR_TBMR_CAPTURE 0x00000003
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAMR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAMR_TAPLO 0x00000800 /**< Legacy PWM operation */
|
||||
#define GPTIMER_TAMR_TAMRSU 0x00000400 /**< Timer A match register update mode */
|
||||
#define GPTIMER_TAMR_TAPWMIE 0x00000200 /**< Timer A PWM interrupt enable */
|
||||
#define GPTIMER_TAMR_TAILD 0x00000100 /**< Timer A PWM interval load write */
|
||||
#define GPTIMER_TAMR_TASNAPS 0x00000080 /**< Timer A snap-shot mode */
|
||||
#define GPTIMER_TAMR_TAWOT 0x00000040 /**< Timer A wait-on-trigger */
|
||||
#define GPTIMER_TAMR_TAMIE 0x00000020 /**< Timer A match interrupt enable */
|
||||
#define GPTIMER_TAMR_TACDIR 0x00000010 /**< Timer A count direction */
|
||||
#define GPTIMER_TAMR_TAAMS 0x00000008 /**< Timer A alternate mode */
|
||||
#define GPTIMER_TAMR_TACMR 0x00000004 /**< Timer A capture mode */
|
||||
#define GPTIMER_TAMR_TAMR 0x00000003 /**< Timer A mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBMR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBMR_TBPLO 0x00000800 /**< Legacy PWM operation */
|
||||
#define GPTIMER_TBMR_TBMRSU 0x00000400 /**< Timer B match register update mode */
|
||||
#define GPTIMER_TBMR_TBPWMIE 0x00000200 /**< Timer B PWM interrupt enable */
|
||||
#define GPTIMER_TBMR_TBILD 0x00000100 /**< Timer B PWM interval load write */
|
||||
#define GPTIMER_TBMR_TBSNAPS 0x00000080 /**< Timer B snap-shot mode */
|
||||
#define GPTIMER_TBMR_TBWOT 0x00000040 /**< Timer B wait-on-trigger */
|
||||
#define GPTIMER_TBMR_TBMIE 0x00000020 /**< Timer B match interrupt enable */
|
||||
#define GPTIMER_TBMR_TBCDIR 0x00000010 /**< Timer B count direction */
|
||||
#define GPTIMER_TBMR_TBAMS 0x00000008 /**< Timer B alternate mode */
|
||||
#define GPTIMER_TBMR_TBCMR 0x00000004 /**< Timer B capture mode */
|
||||
#define GPTIMER_TBMR_TBMR 0x00000003 /**< Timer B mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_CTL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_CTL_TBPWML 0x00004000 /**< Timer B PWM output level */
|
||||
#define GPTIMER_CTL_TBOTE 0x00002000 /**< Timer B output trigger enable */
|
||||
#define GPTIMER_CTL_TBEVENT 0x00000C00 /**< Timer B event mode */
|
||||
#define GPTIMER_CTL_TBSTALL 0x00000200 /**< Timer B stall enable */
|
||||
#define GPTIMER_CTL_TBEN 0x00000100 /**< Timer B enable */
|
||||
#define GPTIMER_CTL_TAPWML 0x00000040 /**< Timer A PWM output level */
|
||||
#define GPTIMER_CTL_TAOTE 0x00000020 /**< Timer A output trigger enable */
|
||||
#define GPTIMER_CTL_RTCEN 0x00000010 /**< RTC enable */
|
||||
#define GPTIMER_CTL_TAEVENT 0x0000000C /**< Timer A event mode */
|
||||
#define GPTIMER_CTL_TASTALL 0x00000002 /**< Timer A stall enable */
|
||||
#define GPTIMER_CTL_TAEN 0x00000001 /**< Timer A enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_SYNC register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_SYNC_SYNC3 0x000000C0 /**< Synchronize GPTM3 */
|
||||
#define GPTIMER_SYNC_SYNC2 0x00000030 /**< Synchronize GPTM2 */
|
||||
#define GPTIMER_SYNC_SYNC1 0x0000000C /**< Synchronize GPTM1 */
|
||||
#define GPTIMER_SYNC_SYNC0 0x00000003 /**< Synchronize GPTM0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_IMR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_IMR_TBMIM 0x00000800 /**< Timer B match int mask */
|
||||
#define GPTIMER_IMR_CBEIM 0x00000400 /**< Timer B capture event int mask */
|
||||
#define GPTIMER_IMR_CBMIM 0x00000200 /**< Timer B capture match int mask */
|
||||
#define GPTIMER_IMR_TBTOIM 0x00000100 /**< Timer B time-out int mask */
|
||||
#define GPTIMER_IMR_TAMIM 0x00000010 /**< Timer A match int mask */
|
||||
#define GPTIMER_IMR_RTCIM 0x00000008 /**< RTC int mask */
|
||||
#define GPTIMER_IMR_CAEIM 0x00000004 /**< Timer A capture event int mask */
|
||||
#define GPTIMER_IMR_CAMIM 0x00000002 /**< Timer A capture match int mask */
|
||||
#define GPTIMER_IMR_TATOIM 0x00000001 /**< Timer A time-out int mask */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_RIS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_RIS_TBMRIS 0x00000800 /**< Timer B match raw status */
|
||||
#define GPTIMER_RIS_CBERIS 0x00000400 /**< Timer B capture event raw status */
|
||||
#define GPTIMER_RIS_CBMRIS 0x00000200 /**< Timer B capture match raw status */
|
||||
#define GPTIMER_RIS_TBTORIS 0x00000100 /**< Timer B time-out raw status */
|
||||
#define GPTIMER_RIS_TAMRIS 0x00000010 /**< Timer A match raw status */
|
||||
#define GPTIMER_RIS_RTCRIS 0x00000008 /**< RTC raw status */
|
||||
#define GPTIMER_RIS_CAERIS 0x00000004 /**< Timer A capture event raw status */
|
||||
#define GPTIMER_RIS_CAMRIS 0x00000002 /**< Timer A capture match raw status */
|
||||
#define GPTIMER_RIS_TATORIS 0x00000001 /**< Timer A time-out raw status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_MIS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_MIS_TBMMIS 0x00000800 /**< Timer B match masked status */
|
||||
#define GPTIMER_MIS_CBEMIS 0x00000400 /**< Timer B capture event masked status */
|
||||
#define GPTIMER_MIS_CBMMIS 0x00000200 /**< Timer B capture match masked status */
|
||||
#define GPTIMER_MIS_TBTOMIS 0x00000100 /**< Timer B time-out masked status */
|
||||
#define GPTIMER_MIS_TAMRIS 0x00000010 /**< Timer A match masked status */
|
||||
#define GPTIMER_MIS_RTCMIS 0x00000008 /**< RTC masked status */
|
||||
#define GPTIMER_MIS_CAEMIS 0x00000004 /**< Timer A capture event masked status */
|
||||
#define GPTIMER_MIS_CAMMIS 0x00000002 /**< Timer A capture match masked status */
|
||||
#define GPTIMER_MIS_TATOMIS 0x00000001 /**< Timer A time-out masked status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_ICR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_ICR_WUECINT 0x00010000 /**< write update error int clear */
|
||||
#define GPTIMER_ICR_TBMCINT 0x00000800 /**< Timer B match int clear */
|
||||
#define GPTIMER_ICR_CBECINT 0x00000400 /**< Timer B capture event int clear */
|
||||
#define GPTIMER_ICR_CBMCINT 0x00000200 /**< Timer B capture match int clear */
|
||||
#define GPTIMER_ICR_TBTOCINT 0x00000100 /**< Timer B time-out int clear */
|
||||
#define GPTIMER_ICR_TAMCINT 0x00000010 /**< Timer A match int clear */
|
||||
#define GPTIMER_ICR_RTCCINT 0x00000008 /**< RTC interrupt clear */
|
||||
#define GPTIMER_ICR_CAECINT 0x00000004 /**< Timer A capture event int clear */
|
||||
#define GPTIMER_ICR_CAMCINT 0x00000002 /**< Timer A capture match int clear */
|
||||
#define GPTIMER_ICR_TATOCINT 0x00000001 /**< Timer A time-out int clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAILR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAILR_TAILR 0xFFFFFFFF /**< A interval load register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBILR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBILR_TBILR 0x0000FFFF /**< B interval load register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAMATCHR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAMATCHR_TAMR 0xFFFFFFFF /**< Timer A match register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBMATCHR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBMATCHR_TBMR 0x0000FFFF /**< Timer B match register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAPR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAPR_TAPSR 0x000000FF /**< Timer A prescale */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBPR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBPR_TBPSR 0x000000FF /**< Timer B prescale */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAPMR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAPMR_TAPSR 0x000000FF /**< Timer A prescale match */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBPMR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBPMR_TBPSR 0x000000FF /**< Timer B prescale match */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAR_TAR 0xFFFFFFFF /**< Timer A register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBR_TBR 0x0000FFFF /**< Timer B register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAV register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAV_TAV 0xFFFFFFFF /**< Timer A register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBV register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBV_PRE 0x00FF0000 /**< Timer B prescale register */
|
||||
#define GPTIMER_TBV_TBV 0x0000FFFF /**< Timer B register */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_RTCPD register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_RTCPD_RTCPD 0x0000FFFF /**< RTC predivider */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAPS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAPS_PSS 0x0000FFFF /**< Timer A prescaler */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBPS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBPS_PSS 0x0000FFFF /**< Timer B prescaler */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TAPV register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TAPV_PSV 0x0000FFFF /**< Timer A prescaler value */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_TBPV register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_TBPV_PSV 0x0000FFFF /**< Timer B prescaler value */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name GPTIMER_PP register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define GPTIMER_PP_ALTCLK 0x00000040 /**< Alternate clock source */
|
||||
#define GPTIMER_PP_SYNCNT 0x00000020 /**< Synchronized start */
|
||||
#define GPTIMER_PP_CHAIN 0x00000010 /**< Chain with other timers */
|
||||
#define GPTIMER_PP_SIZE 0x0000000F /**< Timer size */
|
||||
/** @} */
|
||||
|
||||
#endif /* GPTIMER_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
66
cpu/cc2538/dev/ioc.c
Normal file
66
cpu/cc2538/dev/ioc.c
Normal file
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-ioc
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of IOC functions
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/ioc.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
static uint32_t *ioc_over;
|
||||
static uint32_t *ioc_sel;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
ioc_init()
|
||||
{
|
||||
ioc_over = (uint32_t *)IOC_PA0_OVER;
|
||||
ioc_sel = (uint32_t *)IOC_PA0_SEL;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
ioc_set_over(uint8_t port, uint8_t pin, uint8_t over)
|
||||
{
|
||||
ioc_over[(port << 3) + pin] = over;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
ioc_set_sel(uint8_t port, uint8_t pin, uint8_t sel)
|
||||
{
|
||||
ioc_sel[(port << 3) + pin] = sel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
278
cpu/cc2538/dev/ioc.h
Normal file
278
cpu/cc2538/dev/ioc.h
Normal file
|
|
@ -0,0 +1,278 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-ioc cc2538 I/O Control
|
||||
*
|
||||
* cc2538 I/O Control Module
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with declarations for the I/O Control module
|
||||
*/
|
||||
#ifndef IOC_H_
|
||||
#define IOC_H_
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name IOC Signal Select Registers
|
||||
* @{
|
||||
*/
|
||||
#define IOC_PA0_SEL 0x400D4000
|
||||
#define IOC_PA1_SEL 0x400D4004
|
||||
#define IOC_PA2_SEL 0x400D4008
|
||||
#define IOC_PA3_SEL 0x400D400C
|
||||
#define IOC_PA4_SEL 0x400D4010
|
||||
#define IOC_PA5_SEL 0x400D4014
|
||||
#define IOC_PA6_SEL 0x400D4018
|
||||
#define IOC_PA7_SEL 0x400D401C
|
||||
#define IOC_PB0_SEL 0x400D4020
|
||||
#define IOC_PB1_SEL 0x400D4024
|
||||
#define IOC_PB2_SEL 0x400D4028
|
||||
#define IOC_PB3_SEL 0x400D402C
|
||||
#define IOC_PB4_SEL 0x400D4030
|
||||
#define IOC_PB5_SEL 0x400D4034
|
||||
#define IOC_PB6_SEL 0x400D4038
|
||||
#define IOC_PB7_SEL 0x400D403C
|
||||
#define IOC_PC0_SEL 0x400D4040
|
||||
#define IOC_PC1_SEL 0x400D4044
|
||||
#define IOC_PC2_SEL 0x400D4048
|
||||
#define IOC_PC3_SEL 0x400D404C
|
||||
#define IOC_PC4_SEL 0x400D4050
|
||||
#define IOC_PC5_SEL 0x400D4054
|
||||
#define IOC_PC6_SEL 0x400D4058
|
||||
#define IOC_PC7_SEL 0x400D405C
|
||||
#define IOC_PD0_SEL 0x400D4060
|
||||
#define IOC_PD1_SEL 0x400D4064
|
||||
#define IOC_PD2_SEL 0x400D4068
|
||||
#define IOC_PD3_SEL 0x400D406C
|
||||
#define IOC_PD4_SEL 0x400D4070
|
||||
#define IOC_PD5_SEL 0x400D4074
|
||||
#define IOC_PD6_SEL 0x400D4078
|
||||
#define IOC_PD7_SEL 0x400D407C
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name IOC Override Configuration Registers
|
||||
* @{
|
||||
*/
|
||||
#define IOC_PA0_OVER 0x400D4080
|
||||
#define IOC_PA1_OVER 0x400D4084
|
||||
#define IOC_PA2_OVER 0x400D4088
|
||||
#define IOC_PA3_OVER 0x400D408C
|
||||
#define IOC_PA4_OVER 0x400D4090
|
||||
#define IOC_PA5_OVER 0x400D4094
|
||||
#define IOC_PA6_OVER 0x400D4098
|
||||
#define IOC_PA7_OVER 0x400D409C
|
||||
#define IOC_PB0_OVER 0x400D40A0
|
||||
#define IOC_PB1_OVER 0x400D40A4
|
||||
#define IOC_PB2_OVER 0x400D40A8
|
||||
#define IOC_PB3_OVER 0x400D40AC
|
||||
#define IOC_PB4_OVER 0x400D40B0
|
||||
#define IOC_PB5_OVER 0x400D40B4
|
||||
#define IOC_PB6_OVER 0x400D40B8
|
||||
#define IOC_PB7_OVER 0x400D40BC
|
||||
#define IOC_PC0_OVER 0x400D40C0
|
||||
#define IOC_PC1_OVER 0x400D40C4
|
||||
#define IOC_PC2_OVER 0x400D40C8
|
||||
#define IOC_PC3_OVER 0x400D40CC
|
||||
#define IOC_PC4_OVER 0x400D40D0
|
||||
#define IOC_PC5_OVER 0x400D40D4
|
||||
#define IOC_PC6_OVER 0x400D40D8
|
||||
#define IOC_PC7_OVER 0x400D40DC
|
||||
#define IOC_PD0_OVER 0x400D40E0
|
||||
#define IOC_PD1_OVER 0x400D40E4
|
||||
#define IOC_PD2_OVER 0x400D40E8
|
||||
#define IOC_PD3_OVER 0x400D40EC
|
||||
#define IOC_PD4_OVER 0x400D40F0
|
||||
#define IOC_PD5_OVER 0x400D40F4
|
||||
#define IOC_PD6_OVER 0x400D40F8
|
||||
#define IOC_PD7_OVER 0x400D40FC
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name IOC Input Pin Select Registers
|
||||
* @{
|
||||
*/
|
||||
#define IOC_UARTRXD_UART0 0x400D4100 /**< UART0 RX */
|
||||
#define IOC_UARTCTS_UART1 0x400D4104 /**< UART1 CTS */
|
||||
#define IOC_UARTRXD_UART1 0x400D4108 /**< UART1 RX */
|
||||
#define IOC_CLK_SSI_SSI0 0x400D410C /**< SSI0 Clock */
|
||||
#define IOC_SSIRXD_SSI0 0x400D4110 /**< SSI0 RX */
|
||||
#define IOC_SSIFSSIN_SSI0 0x400D4114 /**< SSI0 FSSIN */
|
||||
#define IOC_CLK_SSIIN_SSI0 0x400D4118 /**< SSI0 Clock SSIIN */
|
||||
#define IOC_CLK_SSI_SSI1 0x400D411C /**< SSI1 Clock */
|
||||
#define IOC_SSIRXD_SSI1 0x400D4120 /**< SSI1 RX */
|
||||
#define IOC_SSIFSSIN_SSI1 0x400D4124 /**< SSI1 FSSIN Select */
|
||||
#define IOC_CLK_SSIIN_SSI1 0x400D4128 /**< SSI1 Clock SSIIN */
|
||||
#define IOC_I2CMSSDA 0x400D412C /**< I2C SDA */
|
||||
#define IOC_I2CMSSCL 0x400D4130 /**< I2C SCL */
|
||||
#define IOC_GPT0OCP1 0x400D4134 /**< GPT0OCP1 */
|
||||
#define IOC_GPT0OCP2 0x400D4138 /**< GPT0OCP2 */
|
||||
#define IOC_GPT1OCP1 0x400D413C /**< GPT1OCP1 */
|
||||
#define IOC_GPT1OCP2 0x400D4140 /**< GPT1OCP2 */
|
||||
#define IOC_GPT2OCP1 0x400D4144 /**< GPT2OCP1 */
|
||||
#define IOC_GPT2OCP2 0x400D4148 /**< GPT2OCP2 */
|
||||
#define IOC_GPT3OCP1 0x400D414C /**< GPT3OCP1 */
|
||||
#define IOC_GPT3OCP2 0x400D4150 /**< GPT3OCP2 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name I/O Control Register Bit Masks
|
||||
* @{
|
||||
*/
|
||||
#define IOC_OVR_MASK 0x0000000F /**< IOC_Pxn_OVER registers */
|
||||
#define IOC_PXX_SEL_MASK 0x0000001F /**< IOC_Pxn_SEL registers */
|
||||
#define IOC_INPUT_SEL_MASK 0x0000001F /**< All other IOC registers */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name INPUT_SEL Values (For Pin Selection Registers)
|
||||
* @{
|
||||
*/
|
||||
#define IOC_INPUT_SEL_PA0 0x00000000
|
||||
#define IOC_INPUT_SEL_PA1 0x00000001
|
||||
#define IOC_INPUT_SEL_PA2 0x00000002
|
||||
#define IOC_INPUT_SEL_PA3 0x00000003
|
||||
#define IOC_INPUT_SEL_PA4 0x00000004
|
||||
#define IOC_INPUT_SEL_PA5 0x00000005
|
||||
#define IOC_INPUT_SEL_PA6 0x00000006
|
||||
#define IOC_INPUT_SEL_PA7 0x00000007
|
||||
#define IOC_INPUT_SEL_PB0 0x00000008
|
||||
#define IOC_INPUT_SEL_PB1 0x00000009
|
||||
#define IOC_INPUT_SEL_PB2 0x0000000A
|
||||
#define IOC_INPUT_SEL_PB3 0x0000000B
|
||||
#define IOC_INPUT_SEL_PB4 0x0000000C
|
||||
#define IOC_INPUT_SEL_PB5 0x0000000D
|
||||
#define IOC_INPUT_SEL_PB6 0x0000000E
|
||||
#define IOC_INPUT_SEL_PB7 0x0000000F
|
||||
#define IOC_INPUT_SEL_PC0 0x00000010
|
||||
#define IOC_INPUT_SEL_PC1 0x00000011
|
||||
#define IOC_INPUT_SEL_PC2 0x00000012
|
||||
#define IOC_INPUT_SEL_PC3 0x00000013
|
||||
#define IOC_INPUT_SEL_PC4 0x00000014
|
||||
#define IOC_INPUT_SEL_PC5 0x00000015
|
||||
#define IOC_INPUT_SEL_PC6 0x00000016
|
||||
#define IOC_INPUT_SEL_PC7 0x00000017
|
||||
#define IOC_INPUT_SEL_PD0 0x00000018
|
||||
#define IOC_INPUT_SEL_PD1 0x00000019
|
||||
#define IOC_INPUT_SEL_PD2 0x0000001A
|
||||
#define IOC_INPUT_SEL_PD3 0x0000001B
|
||||
#define IOC_INPUT_SEL_PD4 0x0000001C
|
||||
#define IOC_INPUT_SEL_PD5 0x0000001D
|
||||
#define IOC_INPUT_SEL_PD6 0x0000001E
|
||||
#define IOC_INPUT_SEL_PD7 0x0000001F
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Peripheral Signal Select Values (for IOC_Pxx_SEL registers)
|
||||
* @{
|
||||
*/
|
||||
#define IOC_PXX_SEL_UART0_TXD 0x00000000
|
||||
#define IOC_PXX_SEL_UART1_RTS 0x00000001
|
||||
#define IOC_PXX_SEL_UART1_TXD 0x00000002
|
||||
#define IOC_PXX_SEL_SSI0_TXD 0x00000003
|
||||
#define IOC_PXX_SEL_SSI0_CLKOUT 0x00000004
|
||||
#define IOC_PXX_SEL_SSI0_FSSOUT 0x00000005
|
||||
#define IOC_PXX_SEL_SSI0_STXSER_EN 0x00000006
|
||||
#define IOC_PXX_SEL_SSI1_TXD 0x00000007
|
||||
#define IOC_PXX_SEL_SSI1_CLKOUT 0x00000008
|
||||
#define IOC_PXX_SEL_SSI1_FSSOUT 0x00000009
|
||||
#define IOC_PXX_SEL_SSI1_STXSER_EN 0x0000000A
|
||||
#define IOC_PXX_SEL_I2C_CMSSDA 0x0000000B
|
||||
#define IOC_PXX_SEL_I2C_CMSSCL 0x0000000C
|
||||
#define IOC_PXX_SEL_GPT0_ICP1 0x0000000D
|
||||
#define IOC_PXX_SEL_GPT0_ICP2 0x0000000E
|
||||
#define IOC_PXX_SEL_GPT1_ICP1 0x0000000F
|
||||
#define IOC_PXX_SEL_GPT1_ICP2 0x00000010
|
||||
#define IOC_PXX_SEL_GPT2_ICP1 0x00000011
|
||||
#define IOC_PXX_SEL_GPT2_ICP2 0x00000012
|
||||
#define IOC_PXX_SEL_GPT3_ICP1 0x00000013
|
||||
#define IOC_PXX_SEL_GPT3_ICP2 0x00000014
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Values for IOC_PXX_OVER
|
||||
* @{
|
||||
*/
|
||||
#define IOC_OVERRIDE_OE 0x00000008 /**< Output Enable */
|
||||
#define IOC_OVERRIDE_PUE 0x00000004 /**< Pull Up Enable */
|
||||
#define IOC_OVERRIDE_PDE 0x00000002 /**< Pull Down Enable */
|
||||
#define IOC_OVERRIDE_ANA 0x00000001 /**< Analog Enable */
|
||||
#define IOC_OVERRIDE_DIS 0x00000000 /**< Override Disabled */
|
||||
/** @} */
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name IOC Functions
|
||||
* @{
|
||||
*/
|
||||
/** \brief Initialise the IOC driver */
|
||||
void ioc_init();
|
||||
|
||||
/**
|
||||
* \brief Set Port:Pin override function
|
||||
* \param port The port as a number (PA: 0, PB: 1 etc)
|
||||
* \param pin The pin as a number
|
||||
* \param over The desired override configuration
|
||||
*
|
||||
* \e over can take the following values:
|
||||
*
|
||||
* - IOC_OVERRIDE_OE: Output
|
||||
* - IOC_OVERRIDE_PUE: Pull-Up
|
||||
* - IOC_OVERRIDE_PDE: Pull-Down
|
||||
* - IOC_OVERRIDE_ANA: Analog
|
||||
* - IOC_OVERRIDE_DIS: Disabled
|
||||
*/
|
||||
void ioc_set_over(uint8_t port, uint8_t pin, uint8_t over);
|
||||
|
||||
/**
|
||||
* \brief Function select for Port:Pin
|
||||
* \param port The port as a number (PA: 0, PB: 1 etc)
|
||||
* \param pin The pin as a number
|
||||
* \param sel The desired function
|
||||
*
|
||||
* The value of \e sel can be any of the IOC_PXX_SEL_xyz defines. For example
|
||||
* IOC_PXX_SEL_UART0_TXD will set the port to act as UART0 TX
|
||||
*/
|
||||
void ioc_set_sel(uint8_t port, uint8_t pin, uint8_t sel);
|
||||
|
||||
/**
|
||||
* \brief Generates an IOC_INPUT_SEL_PXn value from a port/pin number
|
||||
* \param port The port as a number (PA: 0, PB: 1 etc)
|
||||
* \param pin The pin as a number
|
||||
* \return A value which can be written in the INPUT_SEL bits of various IOC
|
||||
* registers
|
||||
*/
|
||||
#define ioc_input_sel(port, pin) ((port << 3) | pin)
|
||||
|
||||
/** @} */
|
||||
#endif /* IOC_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
68
cpu/cc2538/dev/mpu.h
Normal file
68
cpu/cc2538/dev/mpu.h
Normal file
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-mpu cc2538 Memory Protection Unit
|
||||
*
|
||||
* Driver for the cc2538 Memory Protection Unit
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the ARM Memory Protection Unit
|
||||
*/
|
||||
#ifndef MPU_H_
|
||||
#define MPU_H_
|
||||
|
||||
#define MPU_MPU_TYPE 0xE000ED90 /**< MPU Type */
|
||||
#define MPU_MPU_CTRL 0xE000ED94 /**< MPU Control */
|
||||
#define MPU_MPU_NUMBER 0xE000ED98 /**< MPU Region Number */
|
||||
#define MPU_MPU_BASE 0xE000ED9C /**< MPU Region Base Address */
|
||||
#define MPU_MPU_ATTR 0xE000EDA0 /**< MPU Region Attribute and Size */
|
||||
#define MPU_MPU_BASE1 0xE000EDA4 /**< MPU Region Base Address Alias 1 */
|
||||
#define MPU_MPU_ATTR1 0xE000EDA8 /**< MPU Region Attribute and Size Alias 1 */
|
||||
#define MPU_MPU_BASE2 0xE000EDAC /**< MPU Region Base Address Alias 2 */
|
||||
#define MPU_MPU_ATTR2 0xE000EDB0 /**< MPU Region Attribute and Size Alias 2*/
|
||||
#define MPU_MPU_BASE3 0xE000EDB4 /**< MPU Region Base Address Alias 3 */
|
||||
#define MPU_MPU_ATTR3 0xE000EDB8 /**< MPU Region Attribute and Size Alias 3*/
|
||||
#define MPU_DBG_CTRL 0xE000EDF0 /**< Debug Control and Status Reg */
|
||||
#define MPU_DBG_XFER 0xE000EDF4 /**< Debug Core Reg. Transfer Select */
|
||||
#define MPU_DBG_DATA 0xE000EDF8 /**< Debug Core Register Data */
|
||||
#define MPU_DBG_INT 0xE000EDFC /**< Debug Reset Interrupt Control */
|
||||
#define MPU_SW_TRIG 0xE000EF00 /**< Software Trigger Interrupt */
|
||||
|
||||
#endif /* MPU_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
111
cpu/cc2538/dev/nvic.c
Normal file
111
cpu/cc2538/dev/nvic.c
Normal file
|
|
@ -0,0 +1,111 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-nvic
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the cc2538 NVIC
|
||||
* All interrupt-related functionality is implemented here
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "dev/scb.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
static uint32_t *interrupt_enable;
|
||||
static uint32_t *interrupt_disable;
|
||||
static uint32_t *interrupt_pend;
|
||||
static uint32_t *interrupt_unpend;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_init()
|
||||
{
|
||||
interrupt_enable = (uint32_t *)NVIC_EN0;
|
||||
interrupt_disable = (uint32_t *)NVIC_DIS0;
|
||||
interrupt_pend = (uint32_t *)NVIC_PEND0;
|
||||
interrupt_unpend = (uint32_t *)NVIC_UNPEND0;
|
||||
|
||||
/* Provide our interrupt table to the NVIC */
|
||||
REG(SCB_VTABLE) = (NVIC_CONF_VTABLE_BASE | NVIC_CONF_VTABLE_OFFSET);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_interrupt_enable(uint32_t intr)
|
||||
{
|
||||
/* Writes of 0 are ignored, which is why we can simply use = */
|
||||
interrupt_enable[intr >> 5] = 1 << (intr & 0x1F);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_interrupt_disable(uint32_t intr)
|
||||
{
|
||||
/* Writes of 0 are ignored, which is why we can simply use = */
|
||||
interrupt_disable[intr >> 5] = 1 << (intr & 0x1F);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_interrupt_en_restore(uint32_t intr, uint8_t v)
|
||||
{
|
||||
if(v != 1) {
|
||||
return;
|
||||
}
|
||||
|
||||
interrupt_enable[intr >> 5] = 1 << (intr & 0x1F);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t
|
||||
nvic_interrupt_en_save(uint32_t intr)
|
||||
{
|
||||
uint8_t rv = ((interrupt_enable[intr >> 5] & (1 << (intr & 0x1F)))
|
||||
> NVIC_INTERRUPT_DISABLED);
|
||||
|
||||
nvic_interrupt_disable(intr);
|
||||
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_interrupt_pend(uint32_t intr)
|
||||
{
|
||||
/* Writes of 0 are ignored, which is why we can simply use = */
|
||||
interrupt_pend[intr >> 5] = 1 << (intr & 0x1F);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
nvic_interrupt_unpend(uint32_t intr)
|
||||
{
|
||||
/* Writes of 0 are ignored, which is why we can simply use = */
|
||||
interrupt_unpend[intr >> 5] = 1 << (intr & 0x1F);
|
||||
}
|
||||
/** @} */
|
||||
248
cpu/cc2538/dev/nvic.h
Normal file
248
cpu/cc2538/dev/nvic.h
Normal file
|
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-nvic cc2538 Nested Vectored Interrupt Controller
|
||||
*
|
||||
* Driver for the cc2538 NVIC controller
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the ARM Nested Vectored Interrupt Controller
|
||||
*/
|
||||
#ifndef NVIC_H_
|
||||
#define NVIC_H_
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name NVIC Constants and Configuration
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_VTABLE_IN_SRAM 0x20000000
|
||||
#define NVIC_VTABLE_IN_CODE 0x00000000
|
||||
|
||||
#define NVIC_INTERRUPT_ENABLED 0x00000001
|
||||
#define NVIC_INTERRUPT_DISABLED 0x00000000
|
||||
|
||||
#ifndef NVIC_CONF_VTABLE_BASE
|
||||
#define NVIC_CONF_VTABLE_BASE NVIC_VTABLE_IN_CODE
|
||||
#endif
|
||||
|
||||
#ifndef NVIC_CONF_VTABLE_OFFSET
|
||||
#define NVIC_CONF_VTABLE_OFFSET 0x200000
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name NVIC Interrupt assignments
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_INT_GPIO_PORT_A 0 /**< GPIO port A */
|
||||
#define NVIC_INT_GPIO_PORT_B 1 /**< GPIO port B */
|
||||
#define NVIC_INT_GPIO_PORT_C 2 /**< GPIO port C */
|
||||
#define NVIC_INT_GPIO_PORT_D 3 /**< GPIO port D */
|
||||
#define NVIC_INT_UART0 5 /**< UART0 */
|
||||
#define NVIC_INT_UART1 6 /**< UART1 */
|
||||
#define NVIC_INT_SSI0 7 /**< SSI0 */
|
||||
#define NVIC_INT_I2C 8 /**< I2C */
|
||||
#define NVIC_INT_ADC 14 /**< ADC */
|
||||
#define NVIC_INT_WDT 18 /**< Watchdog Timer */
|
||||
#define NVIC_INT_GPTIMER_0A 19 /**< GPTimer 0A */
|
||||
#define NVIC_INT_GPTIMER_0B 20 /**< GPTimer 0B */
|
||||
#define NVIC_INT_GPTIMER_1A 21 /**< GPTimer 1A */
|
||||
#define NVIC_INT_GPTIMER_1B 22 /**< GPTimer 1B */
|
||||
#define NVIC_INT_GPTIMER_2A 23 /**< GPTimer 2A */
|
||||
#define NVIC_INT_GPTIMER_2B 24 /**< GPTimer 2B */
|
||||
#define NVIC_INT_ADC_CMP 25 /**< Analog Comparator */
|
||||
#define NVIC_INT_RF_RXTX_ALT 26 /**< RF TX/RX (Alternate) */
|
||||
#define NVIC_INT_RF_ERR_ALT 27 /**< RF Error (Alternate) */
|
||||
#define NVIC_INT_SYS_CTRL 28 /**< System Control */
|
||||
#define NVIC_INT_FLASH_CTRL 29 /**< Flash memory control */
|
||||
#define NVIC_INT_AES_ALT 30 /**< AES (Alternate) */
|
||||
#define NVIC_INT_PKA_ALT 31 /**< PKA (Alternate) */
|
||||
#define NVIC_INT_SM_TIMER_ALT 32 /**< SM Timer (Alternate) */
|
||||
#define NVIC_INT_MAC_TIMER_ALT 33 /**< MAC Timer (Alternate) */
|
||||
#define NVIC_INT_SSI1 34 /**< SSI1 */
|
||||
#define NVIC_INT_GPTIMER_3A 35 /**< GPTimer 3A */
|
||||
#define NVIC_INT_GPTIMER_3B 36 /**< GPTimer 3B */
|
||||
#define NVIC_INT_UDMA 46 /**< uDMA software */
|
||||
#define NVIC_INT_UDMA_ERR 47 /**< uDMA error */
|
||||
#define NVIC_INT_USB 140 /**< USB */
|
||||
#define NVIC_INT_RF_RXTX 141 /**< RF Core Rx/Tx */
|
||||
#define NVIC_INT_RF_ERR 142 /**< RF Core Error */
|
||||
#define NVIC_INT_AES 143 /**< AES */
|
||||
#define NVIC_INT_PKA 144 /**< PKA */
|
||||
#define NVIC_INT_SM_TIMER 145 /**< SM Timer */
|
||||
#define NVIC_INT_MACTIMER 146 /**< MAC Timer */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name NVIC Register Declarations
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_EN0 0xE000E100 /**< Interrupt 0-31 Set Enable */
|
||||
#define NVIC_EN1 0xE000E104 /**< Interrupt 32-54 Set Enable */
|
||||
#define NVIC_EN2 0xE000E108 /**< Interrupt 64-95 Set Enable */
|
||||
#define NVIC_EN3 0xE000E10C /**< Interrupt 96-127 Set Enable */
|
||||
#define NVIC_EN4 0xE000E110 /**< Interrupt 128-131 Set Enable */
|
||||
#define NVIC_DIS0 0xE000E180 /**< Interrupt 0-31 Clear Enable */
|
||||
#define NVIC_DIS1 0xE000E184 /**< Interrupt 32-54 Clear Enable */
|
||||
#define NVIC_DIS2 0xE000E188 /**< Interrupt 64-95 Clear Enable */
|
||||
#define NVIC_DIS3 0xE000E18C /**< Interrupt 96-127 Clear Enable */
|
||||
#define NVIC_DIS4 0xE000E190 /**< Interrupt 128-131 Clear Enable */
|
||||
#define NVIC_PEND0 0xE000E200 /**< Interrupt 0-31 Set Pending */
|
||||
#define NVIC_PEND1 0xE000E204 /**< Interrupt 32-54 Set Pending */
|
||||
#define NVIC_PEND2 0xE000E208 /**< Interrupt 64-95 Set Pending */
|
||||
#define NVIC_PEND3 0xE000E20C /**< Interrupt 96-127 Set Pending */
|
||||
#define NVIC_PEND4 0xE000E210 /**< Interrupt 128-131 Set Pending */
|
||||
#define NVIC_UNPEND0 0xE000E280 /**< Interrupt 0-31 Clear Pending */
|
||||
#define NVIC_UNPEND1 0xE000E284 /**< Interrupt 32-54 Clear Pending */
|
||||
#define NVIC_UNPEND2 0xE000E288 /**< Interrupt 64-95 Clear Pending */
|
||||
#define NVIC_UNPEND3 0xE000E28C /**< Interrupt 96-127 Clear Pending */
|
||||
#define NVIC_UNPEND4 0xE000E290 /**< Interrupt 128-131 Clear Pending */
|
||||
#define NVIC_ACTIVE0 0xE000E300 /**< Interrupt 0-31 Active Bit */
|
||||
#define NVIC_ACTIVE1 0xE000E304 /**< Interrupt 32-54 Active Bit */
|
||||
#define NVIC_ACTIVE2 0xE000E308 /**< Interrupt 64-95 Active Bit */
|
||||
#define NVIC_ACTIVE3 0xE000E30C /**< Interrupt 96-127 Active Bit */
|
||||
#define NVIC_ACTIVE4 0xE000E310 /**< Interrupt 128-131 Active Bit */
|
||||
#define NVIC_PRI0 0xE000E400 /**< Interrupt 0-3 Priority */
|
||||
#define NVIC_PRI1 0xE000E404 /**< Interrupt 4-7 Priority */
|
||||
#define NVIC_PRI2 0xE000E408 /**< Interrupt 8-11 Priority */
|
||||
#define NVIC_PRI3 0xE000E40C /**< Interrupt 12-15 Priority */
|
||||
#define NVIC_PRI4 0xE000E410 /**< Interrupt 16-19 Priority */
|
||||
#define NVIC_PRI5 0xE000E414 /**< Interrupt 20-23 Priority */
|
||||
#define NVIC_PRI6 0xE000E418 /**< Interrupt 24-27 Priority */
|
||||
#define NVIC_PRI7 0xE000E41C /**< Interrupt 28-31 Priority */
|
||||
#define NVIC_PRI8 0xE000E420 /**< Interrupt 32-35 Priority */
|
||||
#define NVIC_PRI9 0xE000E424 /**< Interrupt 36-39 Priority */
|
||||
#define NVIC_PRI10 0xE000E428 /**< Interrupt 40-43 Priority */
|
||||
#define NVIC_PRI11 0xE000E42C /**< Interrupt 44-47 Priority */
|
||||
#define NVIC_PRI12 0xE000E430 /**< Interrupt 48-51 Priority */
|
||||
#define NVIC_PRI13 0xE000E434 /**< Interrupt 52-53 Priority */
|
||||
#define NVIC_PRI14 0xE000E438 /**< Interrupt 56-59 Priority */
|
||||
#define NVIC_PRI15 0xE000E43C /**< Interrupt 60-63 Priority */
|
||||
#define NVIC_PRI16 0xE000E440 /**< Interrupt 64-67 Priority */
|
||||
#define NVIC_PRI17 0xE000E444 /**< Interrupt 68-71 Priority */
|
||||
#define NVIC_PRI18 0xE000E448 /**< Interrupt 72-75 Priority */
|
||||
#define NVIC_PRI19 0xE000E44C /**< Interrupt 76-79 Priority */
|
||||
#define NVIC_PRI20 0xE000E450 /**< Interrupt 80-83 Priority */
|
||||
#define NVIC_PRI21 0xE000E454 /**< Interrupt 84-87 Priority */
|
||||
#define NVIC_PRI22 0xE000E458 /**< Interrupt 88-91 Priority */
|
||||
#define NVIC_PRI23 0xE000E45C /**< Interrupt 92-95 Priority */
|
||||
#define NVIC_PRI24 0xE000E460 /**< Interrupt 96-99 Priority */
|
||||
#define NVIC_PRI25 0xE000E464 /**< Interrupt 100-103 Priority */
|
||||
#define NVIC_PRI26 0xE000E468 /**< Interrupt 104-107 Priority */
|
||||
#define NVIC_PRI27 0xE000E46C /**< Interrupt 108-111 Priority */
|
||||
#define NVIC_PRI28 0xE000E470 /**< Interrupt 112-115 Priority */
|
||||
#define NVIC_PRI29 0xE000E474 /**< Interrupt 116-119 Priority */
|
||||
#define NVIC_PRI30 0xE000E478 /**< Interrupt 120-123 Priority */
|
||||
#define NVIC_PRI31 0xE000E47C /**< Interrupt 124-127 Priority */
|
||||
#define NVIC_PRI32 0xE000E480 /**< Interrupt 128-131 Priority */
|
||||
#define NVIC_PRI33 0xE000E480 /**< Interrupt 132-135 Priority */
|
||||
#define NVIC_PRI34 0xE000E484 /**< Interrupt 136-139 Priority */
|
||||
#define NVIC_PRI35 0xE000E488 /**< Interrupt 140-143 Priority */
|
||||
#define NVIC_PRI36 0xE000E48c /**< Interrupt 144-147 Priority */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Initialises the NVIC driver */
|
||||
void nvic_init();
|
||||
|
||||
/**
|
||||
* \brief Enables interrupt intr
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
*
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to enable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
void nvic_interrupt_enable(uint32_t intr);
|
||||
|
||||
/**
|
||||
* \brief Disables interrupt intr
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
*
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to disable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
void nvic_interrupt_disable(uint32_t intr);
|
||||
|
||||
/**
|
||||
* \brief Enables interrupt intr if v > 0
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
* \param v 0: No effect, 1: Enables the interrupt
|
||||
*
|
||||
* This function is useful to restore an interrupt to a state previously
|
||||
* saved by nvic_interrupt_en_save. Thus, if when nvic_interrupt_en_save was
|
||||
* called the interrupt was enabled, this function will re-enabled it.
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to disable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
void nvic_interrupt_en_restore(uint32_t intr, uint8_t v);
|
||||
|
||||
/**
|
||||
* \brief Checks the interrupt enabled status for intr
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
* \return 1: Enabled, 0: Disabled
|
||||
*
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to disable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
uint8_t nvic_interrupt_en_save(uint32_t intr);
|
||||
|
||||
/**
|
||||
* \brief Sets intr to pending
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
*
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to enable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
void nvic_interrupt_pend(uint32_t intr);
|
||||
|
||||
/**
|
||||
* \brief Sets intr to no longer pending
|
||||
* \param intr The interrupt number (NOT the vector number). For example,
|
||||
* GPIO Port A interrupt is 0, not 16.
|
||||
*
|
||||
* Possible values for the \e intr param are defined as NVIC_INT_xyz. For
|
||||
* instance, to disable the GPIO Port A interrupt, pass NVIC_INT_GPIO_PORT_A
|
||||
*/
|
||||
void nvic_interrupt_unpend(uint32_t intr);
|
||||
|
||||
#endif /* NVIC_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
133
cpu/cc2538/dev/random.c
Normal file
133
cpu/cc2538/dev/random.c
Normal file
|
|
@ -0,0 +1,133 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-random cc2538 Random Number Generator
|
||||
*
|
||||
* Driver for the cc2538 Hardware Random Number Generator
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Random number generator routines exploiting the cc2538 hardware
|
||||
* capabilities.
|
||||
*
|
||||
* This file overrides core/lib/random.c.
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/rfcore.h"
|
||||
#include "dev/cc2538-rf.h"
|
||||
#include "dev/soc-adc.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "reg.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Generates a new random number using the cc2538 RNG.
|
||||
* \return The random number.
|
||||
*/
|
||||
unsigned short
|
||||
random_rand(void)
|
||||
{
|
||||
uint32_t rv;
|
||||
|
||||
/* Clock the RNG LSFR once */
|
||||
REG(SOC_ADC_ADCCON1) |= SOC_ADC_ADCCON1_RCTRL0;
|
||||
|
||||
rv = REG(SOC_ADC_RNDL) | (REG(SOC_ADC_RNDH) << 8);
|
||||
return ((unsigned short)rv);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Seed the cc2538 random number generator.
|
||||
* \param seed Ignored. It's here because the function prototype is in core.
|
||||
*
|
||||
* We form a seed for the RNG by sampling IF_ADC as
|
||||
* discussed in the user guide.
|
||||
* Seeding with this method should not be done during
|
||||
* normal radio operation. Thus, use this function before
|
||||
* initialising the network.
|
||||
*
|
||||
* \note Must not be called after the RF driver has been initialised and is
|
||||
* in normal operation. If it is absolutely necessary to do so, the
|
||||
* radio will need re-initialised.
|
||||
*/
|
||||
void
|
||||
random_init(unsigned short seed)
|
||||
{
|
||||
int i;
|
||||
unsigned short s = 0;
|
||||
|
||||
/* Make sure the RNG is on */
|
||||
REG(SOC_ADC_ADCCON1) &= ~(SOC_ADC_ADCCON1_RCTRL1 | SOC_ADC_ADCCON1_RCTRL0);
|
||||
|
||||
/* Enable clock for the RF Core */
|
||||
REG(SYS_CTRL_RCGCRFC) = 1;
|
||||
|
||||
/* Infinite RX - FRMCTRL0[3:2] = 10
|
||||
* This will mess with radio operation - see note above */
|
||||
REG(RFCORE_XREG_FRMCTRL0) = 0x00000008;
|
||||
|
||||
/* Turn RF on */
|
||||
CC2538_RF_CSP_ISRXON();
|
||||
|
||||
/*
|
||||
* Wait until "the chip has been in RX long enough for the transients to
|
||||
* have died out. A convenient way to do this is to wait for the RSSI-valid
|
||||
* signal to go high."
|
||||
*/
|
||||
while(!(REG(RFCORE_XREG_RSSISTAT) & RFCORE_XREG_RSSISTAT_RSSI_VALID));
|
||||
|
||||
/*
|
||||
* Form the seed by concatenating bits from IF_ADC in the RF receive path.
|
||||
* Keep sampling until we have read at least 16 bits AND the seed is valid
|
||||
*
|
||||
* Invalid seeds are 0x0000 and 0x8003 and should not be used.
|
||||
*/
|
||||
while(s == 0x0000 || s == 0x8003) {
|
||||
for(i = 0; i < 16; i++) {
|
||||
s |= (REG(RFCORE_XREG_RFRND) & RFCORE_XREG_RFRND_IRND);
|
||||
s <<= 1;
|
||||
}
|
||||
}
|
||||
|
||||
/* High byte first */
|
||||
REG(SOC_ADC_RNDL) = (s >> 8) & 0x00FF;
|
||||
REG(SOC_ADC_RNDL) = s & 0xFF;
|
||||
|
||||
/* RF Off. NETSTACK_RADIO.init() will sort out normal RF operation */
|
||||
CC2538_RF_CSP_ISRFOFF();
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
126
cpu/cc2538/dev/rfcore-ffsm.h
Normal file
126
cpu/cc2538/dev/rfcore-ffsm.h
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rfcore
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header with declarations of the RF Core FFSM registers.
|
||||
*/
|
||||
#ifndef RFCORE_FFSM_H_
|
||||
#define RFCORE_FFSM_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM register offsets
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SRCRESMASK0 0x40088580 /**< Src addr matching result */
|
||||
#define RFCORE_FFSM_SRCRESMASK1 0x40088584 /**< Src addr matching result */
|
||||
#define RFCORE_FFSM_SRCRESMASK2 0x40088588 /**< Src addr matching result */
|
||||
#define RFCORE_FFSM_SRCRESINDEX 0x4008858C /**< Src addr matching result */
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN0 0x40088590 /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN1 0x40088594 /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN2 0x40088598 /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN0 0x4008859C /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN1 0x400885A0 /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN2 0x400885A4 /**< Src addr matching control */
|
||||
#define RFCORE_FFSM_EXT_ADDR0 0x400885A8 /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR1 0x400885AC /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR2 0x400885B0 /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR3 0x400885B4 /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR4 0x400885B8 /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR5 0x400885BC /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR6 0x400885C0 /**< Local address information */
|
||||
#define RFCORE_FFSM_EXT_ADDR7 0x400885C4 /**< Local address information */
|
||||
#define RFCORE_FFSM_PAN_ID0 0x400885C8 /**< Local address information */
|
||||
#define RFCORE_FFSM_PAN_ID1 0x400885CC /**< Local address information */
|
||||
#define RFCORE_FFSM_SHORT_ADDR0 0x400885D0 /**< Local address information */
|
||||
#define RFCORE_FFSM_SHORT_ADDR1 0x400885D4 /**< Local address information */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_SRCRESMASK[0:2] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SRCRESMASK0_SRCRESMASK0 0x000000FF /**< Ext addr match */
|
||||
#define RFCORE_FFSM_SRCRESMASK1_SRCRESMASK1 0x000000FF /**< Short addr match */
|
||||
#define RFCORE_FFSM_SRCRESMASK2_SRCRESMASK2 0x000000FF /**< 24-bit mask */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_SRCRESINDEX register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SRCRESINDEX_SRCRESINDEX 0x000000FF /**< LS Entry bit index */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_SRCEXTPENDEN[0:2] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN0_SRCEXTPENDEN0 0x000000FF /**< 8 LSBs */
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN1_SRCEXTPENDEN1 0x000000FF /**< 8 middle bits */
|
||||
#define RFCORE_FFSM_SRCEXTPENDEN2_SRCEXTPENDEN2 0x000000FF /**< 8 MSBs */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_SRCSHORTPENDEN[0:2] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN0_SRCSHORTPENDEN0 0x000000FF /**< 8 LSBs */
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN1_SRCSHORTPENDEN1 0x000000FF /**< 8 middle */
|
||||
#define RFCORE_FFSM_SRCSHORTPENDEN2_SRCSHORTPENDEN2 0x000000FF /**< 8 MSBs */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_EXT_ADDR[0:7] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_EXT_ADDR0_EXT_ADDR0 0x000000FF /**< EXT_ADDR[7:0] */
|
||||
#define RFCORE_FFSM_EXT_ADDR1_EXT_ADDR1 0x000000FF /**< EXT_ADDR[15:8] */
|
||||
#define RFCORE_FFSM_EXT_ADDR2_EXT_ADDR2 0x000000FF /**< EXT_ADDR[23:16] */
|
||||
#define RFCORE_FFSM_EXT_ADDR3_EXT_ADDR3 0x000000FF /**< EXT_ADDR[31:24] */
|
||||
#define RFCORE_FFSM_EXT_ADDR4_EXT_ADDR4 0x000000FF /**< EXT_ADDR[39:32] */
|
||||
#define RFCORE_FFSM_EXT_ADDR5_EXT_ADDR5 0x000000FF /**< EXT_ADDR[47:40] */
|
||||
#define RFCORE_FFSM_EXT_ADDR6_EXT_ADDR6 0x000000FF /**< EXT_ADDR[55:48] */
|
||||
#define RFCORE_FFSM_EXT_ADDR7_EXT_ADDR7 0x000000FF /**< EXT_ADDR[63:56] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_PAN_ID[0:1] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_PAN_ID0_PAN_ID0 0x000000FF /**< PAN_ID[7:0] */
|
||||
#define RFCORE_FFSM_PAN_ID1_PAN_ID1 0x000000FF /**< PAN_ID[15:8] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM_SHORT_ADDR[0:1] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_FFSM_SHORT_ADDR0_SHORT_ADDR0 0x000000FF /**< SHORT_ADDR[7:0] */
|
||||
#define RFCORE_FFSM_SHORT_ADDR1_SHORT_ADDR1 0x000000FF /**< SHORT_ADDR[15:8] */
|
||||
/** @} */
|
||||
|
||||
#endif /* RFCORE_FFSM_H_ */
|
||||
/** @} */
|
||||
176
cpu/cc2538/dev/rfcore-sfr.h
Normal file
176
cpu/cc2538/dev/rfcore-sfr.h
Normal file
|
|
@ -0,0 +1,176 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rfcore
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header with declarations of the RF Core SFR registers. Includes
|
||||
* declarations of MAC timer registers.
|
||||
*/
|
||||
#ifndef RFCORE_SFR_H_
|
||||
#define RFCORE_SFR_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR register offsets (MAC Timer)
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTCSPCFG 0x40088800 /**< MAC Timer event configuration */
|
||||
#define RFCORE_SFR_MTCTRL 0x40088804 /**< MAC Timer control register */
|
||||
#define RFCORE_SFR_MTIRQM 0x40088808 /**< MAC Timer interrupt mask */
|
||||
#define RFCORE_SFR_MTIRQF 0x4008880C /**< MAC Timer interrupt flags */
|
||||
#define RFCORE_SFR_MTMSEL 0x40088810 /**< MAC Timer multiplex select */
|
||||
#define RFCORE_SFR_MTM0 0x40088814 /**< MAC Timer MUX register 0 */
|
||||
#define RFCORE_SFR_MTM1 0x40088818 /**< MAC Timer MUX register 1 */
|
||||
#define RFCORE_SFR_MTMOVF2 0x4008881C /**< MAC Timer MUX overflow 2 */
|
||||
#define RFCORE_SFR_MTMOVF1 0x40088820 /**< MAC Timer MUX overflow 1 */
|
||||
#define RFCORE_SFR_MTMOVF0 0x40088824 /**< MAC Timer MUX overflow 0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR register offsets (RF)
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFDATA 0x40088828 /**< TX/RX FIFO data */
|
||||
#define RFCORE_SFR_RFERRF 0x4008882C /**< RF error interrupt flags */
|
||||
#define RFCORE_SFR_RFIRQF1 0x40088830 /**< RF interrupt flags */
|
||||
#define RFCORE_SFR_RFIRQF0 0x40088834 /**< RF interrupt flags */
|
||||
#define RFCORE_SFR_RFST 0x40088838 /**< RF CSMA-CA/strobe processor */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTCSPCFG register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTCSPCFG_MACTIMER_EVENMT_CFG 0x00000070 /**< MT_EVENT2 pulse event trigger */
|
||||
#define RFCORE_SFR_MTCSPCFG_MACTIMER_EVENT1_CFG 0x00000007 /**< MT_EVENT1 pulse event trigger */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTCTRL_LATCH_MODE 0x00000008 /**< OVF counter latch mode */
|
||||
#define RFCORE_SFR_MTCTRL_STATE 0x00000004 /**< State of MAC Timer */
|
||||
#define RFCORE_SFR_MTCTRL_SYNC 0x00000002 /**< Timer start/stop timing */
|
||||
#define RFCORE_SFR_MTCTRL_RUN 0x00000001 /**< Timer start/stop */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTIRQM register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_OVF_COMPARE2M 0x00000020 /**< MACTIMER_OVF_COMPARE2 mask */
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_OVF_COMPARE1M 0x00000010 /**< MACTIMER_OVF_COMPARE1 mask */
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_OVF_PERM 0x00000008 /**< MACTIMER_OVF_PER mask */
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_COMPARE2M 0x00000004 /**< MACTIMER_COMPARE2 mask */
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_COMPARE1M 0x00000002 /**< MACTIMER_COMPARE1 mask */
|
||||
#define RFCORE_SFR_MTIRQM_MACTIMER_PERM 0x00000001 /**< MACTIMER_PER mask */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTIRQF register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_OVF_COMPARE2F 0x00000020 /**< MACTIMER_OVF_COMPARE2 flag */
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_OVF_COMPARE1F 0x00000010 /**< MACTIMER_OVF_COMPARE1 flag */
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_OVF_PERF 0x00000008 /**< MACTIMER_OVF_PER flag */
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_COMPARE2F 0x00000004 /**< MACTIMER_COMPARE2 flag */
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_COMPARE1F 0x00000002 /**< MACTIMER_COMPARE1 flag */
|
||||
#define RFCORE_SFR_MTIRQF_MACTIMER_PERF 0x00000001 /**< MACTIMER_PER flag */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTMSEL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTMSEL_MTMOVFSEL 0x00000070 /**< MTMOVF register select */
|
||||
#define RFCORE_SFR_MTMSEL_MTMSEL 0x00000007 /**< MTM register select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTM[0:2] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTM0_MTM0 0x000000FF /**< Register[7:0] */
|
||||
#define RFCORE_SFR_MTM1_MTM1 0x000000FF /**< Register[15:8] */
|
||||
#define RFCORE_SFR_MTMOVF2_MTMOVF2 0x000000FF /**< Register[23:16] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_MTMOVF[1:0] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_MTMOVF1_MTMOVF1 0x000000FF /**< Register[15:8] */
|
||||
#define RFCORE_SFR_MTMOVF0_MTMOVF0 0x000000FF /**< Register[7:0] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_RFDATA register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFDATA_RFD 0x000000FF /**< Read/Write Data from RF FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_RFERRF register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFERRF_STROBEERR 0x00000040 /**< Strobe error */
|
||||
#define RFCORE_SFR_RFERRF_TXUNDERF 0x00000020 /**< TX FIFO underflowed */
|
||||
#define RFCORE_SFR_RFERRF_TXOVERF 0x00000010 /**< TX FIFO overflowed */
|
||||
#define RFCORE_SFR_RFERRF_RXUNDERF 0x00000008 /**< RX FIFO underflowed */
|
||||
#define RFCORE_SFR_RFERRF_RXOVERF 0x00000004 /**< RX FIFO overflowed */
|
||||
#define RFCORE_SFR_RFERRF_RXABO 0x00000002 /**< Frame RX was aborted */
|
||||
#define RFCORE_SFR_RFERRF_NLOCK 0x00000001 /**< Frequency synthesizer lock error */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_RFIRQF1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFIRQF1_CSP_WAIT 0x00000020 /**< CSP Execution continued */
|
||||
#define RFCORE_SFR_RFIRQF1_CSP_STOP 0x00000010 /**< CSP has stopped program */
|
||||
#define RFCORE_SFR_RFIRQF1_CSP_MANINT 0x00000008 /**< CSP Manual interrupt */
|
||||
#define RFCORE_SFR_RFIRQF1_RFIDLE 0x00000004 /**< IDLE state entered */
|
||||
#define RFCORE_SFR_RFIRQF1_TXDONE 0x00000002 /**< Complete frame TX finished */
|
||||
#define RFCORE_SFR_RFIRQF1_TXACKDONE 0x00000001 /**< ACK frame TX finished */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_RFIRQF0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFIRQF0_RXMASKZERO 0x00000080 /**< RXENABLE gone all-zero */
|
||||
#define RFCORE_SFR_RFIRQF0_RXPKTDONE 0x00000040 /**< Complete frame RX */
|
||||
#define RFCORE_SFR_RFIRQF0_FRAME_ACCEPTED 0x00000020 /**< Frame has passed frame filter */
|
||||
#define RFCORE_SFR_RFIRQF0_SRC_MATCH_FOUND 0x00000010 /**< Source match is found */
|
||||
#define RFCORE_SFR_RFIRQF0_SRC_MATCH_DONE 0x00000008 /**< Source matching is complete */
|
||||
#define RFCORE_SFR_RFIRQF0_FIFOP 0x00000004 /**< RX FIFO exceeded threshold */
|
||||
#define RFCORE_SFR_RFIRQF0_SFD 0x00000002 /**< SFD TX or RX */
|
||||
#define RFCORE_SFR_RFIRQF0_ACT_UNUSED 0x00000001 /**< Reserved */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_SFR_RFST register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_SFR_RFST_INSTR 0x000000FF /**< Data written to this register */
|
||||
/** @} */
|
||||
|
||||
#endif /* RFCORE_SFR_H_ */
|
||||
/** @} */
|
||||
671
cpu/cc2538/dev/rfcore-xreg.h
Normal file
671
cpu/cc2538/dev/rfcore-xreg.h
Normal file
|
|
@ -0,0 +1,671 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rfcore
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header with declarations of the RF Core XREGs.
|
||||
*/
|
||||
#ifndef RFCORE_XREG_H_
|
||||
#define RFCORE_XREG_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_FFSM register offsets
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FRMFILT0 0x40088600 /**< Frame filtering control */
|
||||
#define RFCORE_XREG_FRMFILT1 0x40088604 /**< Frame filtering control */
|
||||
#define RFCORE_XREG_SRCMATCH 0x40088608 /**< Source address matching */
|
||||
#define RFCORE_XREG_SRCSHORTEN0 0x4008860C /**< Short address matching */
|
||||
#define RFCORE_XREG_SRCSHORTEN1 0x40088610 /**< Short address matching */
|
||||
#define RFCORE_XREG_SRCSHORTEN2 0x40088614 /**< Short address matching */
|
||||
#define RFCORE_XREG_SRCEXTEN0 0x40088618 /**< Extended address matching */
|
||||
#define RFCORE_XREG_SRCEXTEN1 0x4008861C /**< Extended address matching */
|
||||
#define RFCORE_XREG_SRCEXTEN2 0x40088620 /**< Extended address matching */
|
||||
#define RFCORE_XREG_FRMCTRL0 0x40088624 /**< Frame handling */
|
||||
#define RFCORE_XREG_FRMCTRL1 0x40088628 /**< Frame handling */
|
||||
#define RFCORE_XREG_RXENABLE 0x4008862C /**< RX enabling */
|
||||
#define RFCORE_XREG_RXMASKSET 0x40088630 /**< RX enabling */
|
||||
#define RFCORE_XREG_RXMASKCLR 0x40088634 /**< RX disabling */
|
||||
#define RFCORE_XREG_FREQTUNE 0x40088638 /**< Crystal oscillator freq tuning */
|
||||
#define RFCORE_XREG_FREQCTRL 0x4008863C /**< Controls the RF frequency */
|
||||
#define RFCORE_XREG_TXPOWER 0x40088640 /**< Controls the output power */
|
||||
#define RFCORE_XREG_TXCTRL 0x40088644 /**< Controls the TX settings */
|
||||
#define RFCORE_XREG_FSMSTAT0 0x40088648 /**< Radio status register */
|
||||
#define RFCORE_XREG_FSMSTAT1 0x4008864C /**< Radio status register */
|
||||
#define RFCORE_XREG_FIFOPCTRL 0x40088650 /**< FIFOP threshold */
|
||||
#define RFCORE_XREG_FSMCTRL 0x40088654 /**< FSM options */
|
||||
#define RFCORE_XREG_CCACTRL0 0x40088658 /**< CCA threshold */
|
||||
#define RFCORE_XREG_CCACTRL1 0x4008865C /**< Other CCA Options */
|
||||
#define RFCORE_XREG_RSSI 0x40088660 /**< RSSI status register */
|
||||
#define RFCORE_XREG_RSSISTAT 0x40088664 /**< RSSI valid status register */
|
||||
#define RFCORE_XREG_RXFIRST 0x40088668 /**< First byte in RX FIFO */
|
||||
#define RFCORE_XREG_RXFIFOCNT 0x4008866C /**< Number of bytes in RX FIFO */
|
||||
#define RFCORE_XREG_TXFIFOCNT 0x40088670 /**< Number of bytes in TX FIFO */
|
||||
#define RFCORE_XREG_RXFIRST_PTR 0x40088674 /**< RX FIFO pointer */
|
||||
#define RFCORE_XREG_RXLAST_PTR 0x40088678 /**< RX FIFO pointer */
|
||||
#define RFCORE_XREG_RXP1_PTR 0x4008867C /**< RX FIFO pointer */
|
||||
#define RFCORE_XREG_RXP2_PTR 0x40088680 /**< RX FIFO pointer */
|
||||
#define RFCORE_XREG_TXFIRST_PTR 0x40088684 /**< TX FIFO pointer */
|
||||
#define RFCORE_XREG_TXLAST_PTR 0x40088688 /**< TX FIFO pointer */
|
||||
#define RFCORE_XREG_RFIRQM0 0x4008868C /**< RF interrupt masks */
|
||||
#define RFCORE_XREG_RFIRQM1 0x40088690 /**< RF interrupt masks */
|
||||
#define RFCORE_XREG_RFERRM 0x40088694 /**< RF error interrupt mask */
|
||||
#define RFCORE_XREG_D18_SPARE_OPAMPMC 0x40088698 /**< Operational amp mode ctrl */
|
||||
#define RFCORE_XREG_RFRND 0x4008869C /**< Random data */
|
||||
#define RFCORE_XREG_MDMCTRL0 0x400886A0 /**< Controls modem */
|
||||
#define RFCORE_XREG_MDMCTRL1 0x400886A4 /**< Controls modem */
|
||||
#define RFCORE_XREG_FREQEST 0x400886A8 /**< Estimated RF frequency offset */
|
||||
#define RFCORE_XREG_RXCTRL 0x400886AC /**< Tune receive section */
|
||||
#define RFCORE_XREG_FSCTRL 0x400886B0 /**< Tune frequency synthesizer */
|
||||
#define RFCORE_XREG_FSCAL1 0x400886B8 /**< Tune frequency calibration */
|
||||
#define RFCORE_XREG_FSCAL2 0x400886BC /**< Tune frequency calibration */
|
||||
#define RFCORE_XREG_FSCAL3 0x400886C0 /**< Tune frequency calibration */
|
||||
#define RFCORE_XREG_AGCCTRL0 0x400886C4 /**< AGC dynamic range control */
|
||||
#define RFCORE_XREG_AGCCTRL1 0x400886C8 /**< AGC reference level */
|
||||
#define RFCORE_XREG_AGCCTRL2 0x400886CC /**< AGC gain override */
|
||||
#define RFCORE_XREG_AGCCTRL3 0x400886D0 /**< AGC control */
|
||||
#define RFCORE_XREG_ADCTEST0 0x400886D4 /**< ADC tuning */
|
||||
#define RFCORE_XREG_ADCTEST1 0x400886D8 /**< ADC tuning */
|
||||
#define RFCORE_XREG_ADCTEST2 0x400886DC /**< ADC tuning */
|
||||
#define RFCORE_XREG_MDMTEST0 0x400886E0 /**< Test register for modem */
|
||||
#define RFCORE_XREG_MDMTEST1 0x400886E4 /**< Test Register for Modem */
|
||||
#define RFCORE_XREG_DACTEST0 0x400886E8 /**< DAC override value */
|
||||
#define RFCORE_XREG_DACTEST1 0x400886EC /**< DAC override value */
|
||||
#define RFCORE_XREG_DACTEST2 0x400886F0 /**< DAC test setting */
|
||||
#define RFCORE_XREG_ATEST 0x400886F4 /**< Analog test control */
|
||||
#define RFCORE_XREG_PTEST0 0x400886F8 /**< Override power-down register */
|
||||
#define RFCORE_XREG_PTEST1 0x400886FC /**< Override power-down register */
|
||||
#define RFCORE_XREG_CSPPROG0 0x40088700 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG1 0x40088704 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG2 0x40088708 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG3 0x4008870C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG4 0x40088710 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG5 0x40088714 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG6 0x40088718 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG7 0x4008871C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG8 0x40088720 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG9 0x40088724 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG10 0x40088728 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG11 0x4008872C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG12 0x40088730 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG13 0x40088734 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG14 0x40088738 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG15 0x4008873C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG16 0x40088740 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG17 0x40088744 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG18 0x40088748 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG19 0x4008874C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG20 0x40088750 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG21 0x40088754 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG22 0x40088758 /**< CSP program */
|
||||
#define RFCORE_XREG_CSPPROG23 0x4008875C /**< CSP program */
|
||||
#define RFCORE_XREG_CSPCTRL 0x40088780 /**< CSP control bit */
|
||||
#define RFCORE_XREG_CSPSTAT 0x40088784 /**< CSP status register */
|
||||
#define RFCORE_XREG_CSPX 0x40088788 /**< CSP X data register */
|
||||
#define RFCORE_XREG_CSPY 0x4008878C /**< CSP Y data register */
|
||||
#define RFCORE_XREG_CSPZ 0x40088790 /**< CSP Z data register */
|
||||
#define RFCORE_XREG_CSPT 0x40088794 /**< CSP T data register */
|
||||
#define RFCORE_XREG_RFC_DUTY_CYCLE 0x400887A0 /**< RX duty cycle control */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL0 0x400887AC /**< RF observation mux control */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL1 0x400887B0 /**< RF observation mux control */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL2 0x400887B4 /**< RF observation mux control */
|
||||
#define RFCORE_XREG_TXFILTCFG 0x400887E8 /**< TX filter configuration */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FRMFILT0 register offsets
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FRMFILT0_MAX_FRAME_VERSION 0x0000000C /**< Frame version filtering */
|
||||
#define RFCORE_XREG_FRMFILT0_PAN_COORDINATOR 0x00000002 /**< PAN coordinator */
|
||||
#define RFCORE_XREG_FRMFILT0_FRAME_FILTER_EN 0x00000001 /**< Enables frame filtering */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FRMFILT1 register offsets
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FRMFILT1_ACCEPT_FT_3_MAC_CMD 0x00000040 /**< MAC command frame filt */
|
||||
#define RFCORE_XREG_FRMFILT1_ACCEPT_FT_2_ACK 0x00000020 /**< ack frame filt */
|
||||
#define RFCORE_XREG_FRMFILT1_ACCEPT_FT_1_DATA 0x00000010 /**< data frame filt */
|
||||
#define RFCORE_XREG_FRMFILT1_ACCEPT_FT_0_BEACON 0x00000008 /**< beacon frame filt */
|
||||
#define RFCORE_XREG_FRMFILT1_MODIFY_FT_FILTER 0x00000006 /**< Frame type modify */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCMATCH register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCMATCH_PEND_DATAREQ_ONLY 0x00000004 /**< AUTOPEND function */
|
||||
#define RFCORE_XREG_SRCMATCH_AUTOPEND 0x00000002 /**< Automatic acknowledgment */
|
||||
#define RFCORE_XREG_SRCMATCH_SRC_MATCH_EN 0x00000001 /**< Source address matching enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCSHORTEN0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCSHORTEN0_SHORT_ADDR_EN 0x000000FF /**< SHORT_ADDR_EN[7:0] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCSHORTEN1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCSHORTEN1_SHORT_ADDR_EN 0x000000FF /**< SHORT_ADDR_EN[15:8] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCSHORTEN2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCSHORTEN2_SHORT_ADDR_EN 0x000000FF /**< SHORT_ADDR_EN[23:16] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCEXTEN0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCEXTEN0_EXT_ADDR_EN 0x000000FF /**< EXT_ADDR_EN[7:0] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCEXTEN1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCEXTEN1_EXT_ADDR_EN 0x000000FF /**< EXT_ADDR_EN[15:8] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_SRCEXTEN2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_SRCEXTEN2_EXT_ADDR_EN 0x000000FF /**< EXT_ADDR_EN[23:16] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FRMCTRL0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FRMCTRL0_APPEND_DATA_MODE 0x00000080 /**< Append data mode */
|
||||
#define RFCORE_XREG_FRMCTRL0_AUTOCRC 0x00000040 /**< Auto CRC generation / checking */
|
||||
#define RFCORE_XREG_FRMCTRL0_AUTOACK 0x00000020 /**< Transmit ACK frame enable */
|
||||
#define RFCORE_XREG_FRMCTRL0_ENERGY_SCAN 0x00000010 /**< RSSI register content control */
|
||||
#define RFCORE_XREG_FRMCTRL0_RX_MODE 0x0000000C /**< Set RX modes */
|
||||
#define RFCORE_XREG_FRMCTRL0_TX_MODE 0x00000003 /**< Set test modes for TX */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FRMCTRL1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FRMCTRL1_PENDING_OR 0x00000004 /**< Pending data bit control */
|
||||
#define RFCORE_XREG_FRMCTRL1_IGNORE_TX_UNDERF 0x00000002 /**< TX underflow ignore */
|
||||
#define RFCORE_XREG_FRMCTRL1_SET_RXENMASK_ON_TX 0x00000001 /**< RXENABLE control */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXENABLE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXENABLE_RXENMASK 0x000000FF /**< Enables the receiver. */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXMASKSET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXMASKSET_RXENMASKSET 0x000000FF /**< Write to RXENMASK (OR) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXMASKCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXMASKCLR_RXENMASKCLR 0x000000FF /**< RXENMASK clear bits */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FREQTUNE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FREQTUNE_XOSC32M_TUNE 0x0000000F /**< Tune crystal oscillator */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FREQCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FREQCTRL_FREQ 0x0000007F /**< Frequency control word */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_TXPOWER register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_TXPOWER_PA_POWER 0x000000F0 /**< PA power control */
|
||||
#define RFCORE_XREG_TXPOWER_PA_BIAS 0x0000000F /**< PA bias control */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_TXCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_TXCTRL_DAC_CURR 0x00000070 /**< Change the current in the DAC. */
|
||||
#define RFCORE_XREG_TXCTRL_DAC_DC 0x0000000C /**< Adjusts the DC level to the TX mixer */
|
||||
#define RFCORE_XREG_TXCTRL_TXMIX_CURRENT 0x00000003 /**< TX mixer core current */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSMSTAT0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSMSTAT0_CAL_DONE 0x00000080 /**< Calib has been performed */
|
||||
#define RFCORE_XREG_FSMSTAT0_CAL_RUNNING 0x00000040 /**< Calib status */
|
||||
#define RFCORE_XREG_FSMSTAT0_FSM_FFCTRL_STATE 0x0000003F /**< FIFO and FFCTRL status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSMSTAT1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSMSTAT1_FIFO 0x00000080 /**< FIFO status */
|
||||
#define RFCORE_XREG_FSMSTAT1_FIFOP 0x00000040 /**< FIFOP status */
|
||||
#define RFCORE_XREG_FSMSTAT1_SFD 0x00000020 /**< SFD was sent/received */
|
||||
#define RFCORE_XREG_FSMSTAT1_CCA 0x00000010 /**< Clear channel assessment */
|
||||
#define RFCORE_XREG_FSMSTAT1_SAMPLED_CCA 0x00000008 /**< CCA sample value */
|
||||
#define RFCORE_XREG_FSMSTAT1_LOCK_STATUS 0x00000004 /**< PLL lock status */
|
||||
#define RFCORE_XREG_FSMSTAT1_TX_ACTIVE 0x00000002 /**< Status signal - TX states */
|
||||
#define RFCORE_XREG_FSMSTAT1_RX_ACTIVE 0x00000001 /**< Status signal - RX states */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FIFOPCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FIFOPCTRL_FIFOP_THR 0x0000007F /**< FIFOP signal threshold */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSMCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSMCTRL_SLOTTED_ACK 0x00000002 /**< ACK frame TX timing */
|
||||
#define RFCORE_XREG_FSMCTRL_RX2RX_TIME_OFF 0x00000001 /**< 12-sym timeout after RX */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CCACTRL0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CCACTRL0_CCA_THR 0x000000FF /**< Clear-channel-assessment */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CCACTRL1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CCACTRL1_CCA_MODE 0x00000018 /**< CCA mode */
|
||||
#define RFCORE_XREG_CCACTRL1_CCA_HYST 0x00000007 /**< CCA hysteresis */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RSSI register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RSSI_RSSI_VAL 0x000000FF /**< RSSI estimate */
|
||||
#define RFCORE_XREG_RSSI_RSSI_VAL_S 0
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RSSISTAT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RSSISTAT_RSSI_VALID 0x00000001 /**< RSSI value is valid */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXFIRST register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXFIRST_DATA 0x000000FF /**< First byte of the RX FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXFIFOCNT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXFIFOCNT_RXFIFOCNT 0x000000FF /**< Number of bytes in the RX FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_TXFIFOCNT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_TXFIFOCNT_TXFIFOCNT 0x000000FF /**< Number of bytes in the TX FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RX FIFO pointers
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXFIRST_PTR_RXFIRST_PTR 0x000000FF /**< Byte 1 */
|
||||
#define RFCORE_XREG_RXLAST_PTR_RXLAST_PTR 0x000000FF /**< Last byte + 1 */
|
||||
#define RFCORE_XREG_RXP1_PTR_RXP1_PTR 0x000000FF /**< Frame 1, byte 1 */
|
||||
#define RFCORE_XREG_RXP2_PTR_RXP2_PTR 0x000000FF /**< Last frame, byte 1 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name TX FIFO pointers
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_TXFIRST_PTR_TXFIRST_PTR 0x000000FF /**< Next byte to be TXd */
|
||||
#define RFCORE_XREG_TXLAST_PTR_TXLAST_PTR 0x000000FF /**< Last byte + 1 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFIRQM0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFIRQM0_RFIRQM 0x000000FF /**< Interrupt source bit mask */
|
||||
#define RFCORE_XREG_RFIRQM0_RXMASKZERO 0x00000080 /**< RXENABLE gone all-zero */
|
||||
#define RFCORE_XREG_RFIRQM0_RXPKTDONE 0x00000040 /**< Complete frame RX */
|
||||
#define RFCORE_XREG_RFIRQM0_FRAME_ACCEPTED 0x00000020 /**< Frame has passed frame filter */
|
||||
#define RFCORE_XREG_RFIRQM0_SRC_MATCH_FOUND 0x00000010 /**< Source match is found */
|
||||
#define RFCORE_XREG_RFIRQM0_SRC_MATCH_DONE 0x00000008 /**< Source matching is complete */
|
||||
#define RFCORE_XREG_RFIRQM0_FIFOP 0x00000004 /**< RX FIFO exceeded threshold */
|
||||
#define RFCORE_XREG_RFIRQM0_SFD 0x00000002 /**< SFD TX or RX */
|
||||
#define RFCORE_XREG_RFIRQM0_ACT_UNUSED 0x00000001 /**< Reserved */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFIRQM1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFIRQM1_RFIRQM 0x0000003F /**< Interrupt source bit mask */
|
||||
#define RFCORE_XREG_RFIRQM1_CSP_WAIT 0x00000020 /**< CSP Execution continued */
|
||||
#define RFCORE_XREG_RFIRQM1_CSP_STOP 0x00000010 /**< CSP has stopped program */
|
||||
#define RFCORE_XREG_RFIRQM1_CSP_MANINT 0x00000008 /**< CSP Manual interrupt */
|
||||
#define RFCORE_XREG_RFIRQM1_RFIDLE 0x00000004 /**< IDLE state entered */
|
||||
#define RFCORE_XREG_RFIRQM1_TXDONE 0x00000002 /**< Complete frame TX finished */
|
||||
#define RFCORE_XREG_RFIRQM1_TXACKDONE 0x00000001 /**< ACK frame TX finished */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFERRM register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFERRM_RFERRM 0x0000007F /**< RF error interrupt mask */
|
||||
#define RFCORE_XREG_RFERRM_STROBEERR 0x00000040 /**< Strobe error */
|
||||
#define RFCORE_XREG_RFERRM_TXUNDERF 0x00000020 /**< TX FIFO underflowed */
|
||||
#define RFCORE_XREG_RFERRM_TXOVERF 0x00000010 /**< TX FIFO overflowed */
|
||||
#define RFCORE_XREG_RFERRM_RXUNDERF 0x00000008 /**< RX FIFO underflowed */
|
||||
#define RFCORE_XREG_RFERRM_RXOVERF 0x00000004 /**< RX FIFO overflowed */
|
||||
#define RFCORE_XREG_RFERRM_RXABO 0x00000002 /**< Frame RX was aborted */
|
||||
#define RFCORE_XREG_RFERRM_NLOCK 0x00000001 /**< Frequency synthesizer lock error */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_D18_SPARE_OPAMPMC register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_D18_SPARE_OPAMPMC_MODE 0x00000003 /**< Operational amplifier mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFRND register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFRND_QRND 0x00000002 /**< Random bit from the Q channel */
|
||||
#define RFCORE_XREG_RFRND_IRND 0x00000001 /**< Random bit from the I channel */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_MDMCTRL0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_MDMCTRL0_DEM_NUM_ZEROS 0x000000C0 /**< Num of zero symbols before sync word */
|
||||
#define RFCORE_XREG_MDMCTRL0_DEMOD_AVG_MODE 0x00000020 /**< Frequency offset averaging filter */
|
||||
#define RFCORE_XREG_MDMCTRL0_PREAMBLE_LENGTH 0x0000001E /**< Number of preamble bytes */
|
||||
#define RFCORE_XREG_MDMCTRL0_TX_FILTER 0x00000001 /**< TX filter type */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_MDMCTRL1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_MDMCTRL1_CORR_THR_SFD 0x00000020 /**< SFD detection requirements */
|
||||
#define RFCORE_XREG_MDMCTRL1_CORR_THR 0x0000001F /**< Demodulator correlator threshold */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FREQEST register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FREQEST_FREQEST 0x000000FF
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RXCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RXCTRL_GBIAS_LNA2_REF 0x00000030 /**< LNA2/mixer PTAT current output */
|
||||
#define RFCORE_XREG_RXCTRL_GBIAS_LNA_REF 0x0000000C /**< LNA PTAT current output */
|
||||
#define RFCORE_XREG_RXCTRL_MIX_CURRENT 0x00000003 /**< Control of the output current */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSCTRL_PRE_CURRENT 0x000000C0 /**< Prescaler current setting */
|
||||
#define RFCORE_XREG_FSCTRL_LODIV_BUF_CURRENT_TX 0x00000030 /**< Adjusts current in mixer and PA adjust */
|
||||
#define RFCORE_XREG_FSCTRL_LODIV_BUF_CURRENT_RX 0x0000000C /**< Adjusts current in mixer and PA adjust */
|
||||
#define RFCORE_XREG_FSCTRL_LODIV_CURRENT 0x00000003 /**< Adjusts divider currents */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSCAL1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSCAL1_VCO_CURR_CAL_OE 0x00000080 /**< Override current calibration */
|
||||
#define RFCORE_XREG_FSCAL1_VCO_CURR_CAL 0x0000007C /**< Calibration result */
|
||||
#define RFCORE_XREG_FSCAL1_VCO_CURR 0x00000003 /**< Defines current in VCO core */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSCAL2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSCAL2_VCO_CAPARR_OE 0x00000040 /**< Override the calibration result */
|
||||
#define RFCORE_XREG_FSCAL2_VCO_CAPARR 0x0000003F /**< VCO capacitor array setting */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_FSCAL3 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_FSCAL3_VCO_DAC_EN_OV 0x00000040 /**< VCO DAC Enable */
|
||||
#define RFCORE_XREG_FSCAL3_VCO_VC_DAC 0x0000003C /**< Varactor control voltage Bit vector */
|
||||
#define RFCORE_XREG_FSCAL3_VCO_CAPARR_CAL_CTRL 0x00000003 /**< Calibration accuracy setting */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_AGCCTRL0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_AGCCTRL0_AGC_DR_XTND_EN 0x00000040 /**< AAF attenuation adjustment */
|
||||
#define RFCORE_XREG_AGCCTRL0_AGC_DR_XTND_THR 0x0000003F /**< Enable extra attenuation in front end */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_AGCCTRL1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_AGCCTRL1_AGC_REF 0x0000003F /**< Target value for the AGC control loop */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_AGCCTRL2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_AGCCTRL2_LNA1_CURRENT 0x000000C0 /**< Overrride value for LNA 1 */
|
||||
#define RFCORE_XREG_AGCCTRL2_LNA2_CURRENT 0x00000038 /**< Overrride value for LNA 2 */
|
||||
#define RFCORE_XREG_AGCCTRL2_LNA3_CURRENT 0x00000006 /**< Overrride value for LNA 3 */
|
||||
#define RFCORE_XREG_AGCCTRL2_LNA_CURRENT_OE 0x00000001 /**< AGC LNA override */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_AGCCTRL3 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_AGCCTRL3_AGC_SETTLE_WAIT 0x00000060 /**< AGC analog gain wait */
|
||||
#define RFCORE_XREG_AGCCTRL3_AGC_WIN_SIZE 0x00000018 /**< AGC accumulate-and-dump window size */
|
||||
#define RFCORE_XREG_AGCCTRL3_AAF_RP 0x00000006 /**< AGC to AAF control signal override */
|
||||
#define RFCORE_XREG_AGCCTRL3_AAF_RP_OE 0x00000001 /**< AAF control signal override */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_ADCTEST0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_ADCTEST0_ADC_VREF_ADJ 0x000000C0 /**< Quantizer threshold control */
|
||||
#define RFCORE_XREG_ADCTEST0_ADC_QUANT_ADJ 0x00000030 /**< Quantizer threshold control */
|
||||
#define RFCORE_XREG_ADCTEST0_ADC_GM_ADJ 0x0000000E /**< Gm-control for test and debug */
|
||||
#define RFCORE_XREG_ADCTEST0_ADC_DAC2_EN 0x00000001 /**< Enables DAC2 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_ADCTEST1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_ADCTEST1_ADC_TEST_CTRL 0x000000F0 /**< ADC test mode selector */
|
||||
#define RFCORE_XREG_ADCTEST1_ADC_C2_ADJ 0x0000000C /**< ADC capacitor value adjust */
|
||||
#define RFCORE_XREG_ADCTEST1_ADC_C3_ADJ 0x00000003 /**< ADC capacitor value adjust */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_ADCTEST2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_ADCTEST2_ADC_TEST_MODE 0x00000060 /**< ADC data output test mode */
|
||||
#define RFCORE_XREG_ADCTEST2_AAF_RS 0x00000018 /**< AAF series resistance control */
|
||||
#define RFCORE_XREG_ADCTEST2_ADC_FF_ADJ 0x00000006 /**< Adjust feed forward */
|
||||
#define RFCORE_XREG_ADCTEST2_ADC_DAC_ROT 0x00000001 /**< Control of DAC DWA scheme */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_MDMTEST0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_MDMTEST0_TX_TONE 0x000000F0 /**< Baseband tone TX enable */
|
||||
#define RFCORE_XREG_MDMTEST0_DC_WIN_SIZE 0x0000000C /**< Controls the numbers of samples */
|
||||
#define RFCORE_XREG_MDMTEST0_DC_BLOCK_MODE 0x00000003 /**< Mode of operation select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_MDMTEST1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_MDMTEST1_USEMIRROR_IF 0x00000020 /**< IF frequency select */
|
||||
#define RFCORE_XREG_MDMTEST1_MOD_IF 0x00000010 /**< Modulation select */
|
||||
#define RFCORE_XREG_MDMTEST1_RAMP_AMP 0x00000008 /**< Ramping of DAC output enable */
|
||||
#define RFCORE_XREG_MDMTEST1_RFC_SNIFF_EN 0x00000004 /**< Packet sniffer module enable */
|
||||
#define RFCORE_XREG_MDMTEST1_MODULATION_MODE 0x00000002 /**< RF-modulation mode */
|
||||
#define RFCORE_XREG_MDMTEST1_LOOPBACK_EN 0x00000001 /**< Modulated data loopback enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_DACTEST0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_DACTEST0_DAC_Q 0x400886FF /**< Q-branch DAC override value */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_DACTEST1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_DACTEST1_DAC_I 0x400886FF /**< I-branch DAC override value */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_DACTEST2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_DACTEST2_DAC_DEM_EN 0x00000020 /**< Dynamic element matching enable */
|
||||
#define RFCORE_XREG_DACTEST2_DAC_CASC_CTRL 0x00000018 /**< Adjustment of output stage */
|
||||
#define RFCORE_XREG_DACTEST2_DAC_SRC 0x00000007 /**< TX DAC data src select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_ATEST register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_ATEST_ATEST_CTRL 0x0000003F /**< Controls the analog test mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_PTEST0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_PTEST0_PRE_PD 0x00000080 /**< Prescaler power-down signal */
|
||||
#define RFCORE_XREG_PTEST0_CHP_PD 0x00000040 /**< Charge pump power-down signal */
|
||||
#define RFCORE_XREG_PTEST0_ADC_PD 0x00000020 /**< ADC power-down signal When */
|
||||
#define RFCORE_XREG_PTEST0_DAC_PD 0x00000010 /**< DAC power-down signal When */
|
||||
#define RFCORE_XREG_PTEST0_LNA_PD 0x0000000C /**< Low-noise amplifier power-down */
|
||||
#define RFCORE_XREG_PTEST0_TXMIX_PD 0x00000002 /**< Transmit mixer power-down */
|
||||
#define RFCORE_XREG_PTEST0_AAF_PD 0x00000001 /**< Antialiasing filter power-down */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_PTEST1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_PTEST1_PD_OVERRIDE 0x00000008 /**< Override module enabling and disabling */
|
||||
#define RFCORE_XREG_PTEST1_PA_PD 0x00000004 /**< Power amplifier power-down signal */
|
||||
#define RFCORE_XREG_PTEST1_VCO_PD 0x00000002 /**< VCO power-down signal */
|
||||
#define RFCORE_XREG_PTEST1_LODIV_PD 0x00000001 /**< LO power-down signal */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPPROG[0:24] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPPROG_CSP_INSTR 0x000000FF /**< Byte N of the CSP program */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPCTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPCTRL_MCU_CTRL 0x00000001 /**< CSP MCU control input */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPSTAT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPSTAT_CSP_RUNNING 0x00000020 /**< CSP Running / Idle */
|
||||
#define RFCORE_XREG_CSPSTAT_CSP_PC 0x0000001F /**< CSP program counter */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPX register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPX_CSPX 0x000000FF /**< CSP X data */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPY register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPY_CSPY 0x000000FF /**< CSP Y data */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPZ register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPZ_CSPZ 0x000000FF /**< CSP Z data */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_CSPT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_CSPT_CSPT 0x000000FF /**< CSP T data */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFC_DUTY_CYCLE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFC_DUTY_CYCLE_SWD_EN 0x00000040 /**< Wire debug mode */
|
||||
#define RFCORE_XREG_RFC_DUTY_CYCLE_DTC_DCCAL_MODE 0x00000030 /**< Periodic DC-recalibration mode */
|
||||
#define RFCORE_XREG_RFC_DUTY_CYCLE_DUTYCYCLE_CNF 0x0000000E /**< Defines duty cycling */
|
||||
#define RFCORE_XREG_RFC_DUTY_CYCLE_DUTYCYCLE_EN 0x00000001 /**< Duty cycling mode enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_RFC_OBS_CTRL[0:2] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL0_RFC_OBS_POL0 0x00000040 /**< RFC_OBS_MUX0 XOR bit */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL0_RFC_OBS_MUX0 0x0000003F /**< RF Core MUX out control */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL1_RFC_OBS_POL1 0x00000040 /**< RFC_OBS_MUX0 XOR bit */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL1_RFC_OBS_MUX1 0x0000003F /**< RF Core MUX out control */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL2_RFC_OBS_POL2 0x00000040 /**< RFC_OBS_MUX0 XOR bit */
|
||||
#define RFCORE_XREG_RFC_OBS_CTRL2_RFC_OBS_MUX2 0x0000003F /**< RF Core MUX out control */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name RFCORE_XREG_TXFILTCFG register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define RFCORE_XREG_TXFILTCFG_FC 0x0000000F /**< Drives signal rfr_txfilt_fc */
|
||||
/** @} */
|
||||
|
||||
#endif /* RFCORE_XREG_H_ */
|
||||
/** @} */
|
||||
57
cpu/cc2538/dev/rfcore.h
Normal file
57
cpu/cc2538/dev/rfcore.h
Normal file
|
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-rfcore cc2538 RF Core
|
||||
*
|
||||
* Declarations of RF Core registers. Includes SFR, XREG and FFSM
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Top-level header file for cc2538 RF Core registers. Includes the files
|
||||
* where the actual declarations reside
|
||||
*/
|
||||
#ifndef RFCORE_H_
|
||||
#define RFCORE_H_
|
||||
|
||||
#include "dev/rfcore-ffsm.h"
|
||||
#include "dev/rfcore-xreg.h"
|
||||
#include "dev/rfcore-sfr.h"
|
||||
#include "dev/ana-regs.h"
|
||||
|
||||
#endif /* RFCORE_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
81
cpu/cc2538/dev/scb.h
Normal file
81
cpu/cc2538/dev/scb.h
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-scb cc2538 System Control Block
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the System Control Block (SCB)
|
||||
*/
|
||||
#ifndef SCB_H_
|
||||
#define SCB_H_
|
||||
|
||||
#define SCB_CPUID 0xE000ED00 /**< CPU ID Base */
|
||||
#define SCB_INTCTRL 0xE000ED04 /**< Interrupt Control and State */
|
||||
#define SCB_VTABLE 0xE000ED08 /**< Vector Table Offset */
|
||||
#define SCB_APINT 0xE000ED0C /**< Application Interrupt and Reset Control */
|
||||
#define SCB_SYSCTRL 0xE000ED10 /**< System Control */
|
||||
#define SCB_CFGCTRL 0xE000ED14 /**< Configuration and Control */
|
||||
#define SCB_SYSPRI1 0xE000ED18 /**< System Handler Priority 1 */
|
||||
#define SCB_SYSPRI2 0xE000ED1C /**< System Handler Priority 2 */
|
||||
#define SCB_SYSPRI3 0xE000ED20 /**< System Handler Priority 3 */
|
||||
#define SCB_SYSHNDCTRL 0xE000ED24 /**< System Handler Control and State */
|
||||
#define SCB_FAULTSTAT 0xE000ED28 /**< Configurable Fault Status */
|
||||
#define SCB_HFAULTSTAT 0xE000ED2C /**< Hard Fault Status */
|
||||
#define SCB_DEBUG_STAT 0xE000ED30 /**< Debug Status Register */
|
||||
#define SCB_MMADDR 0xE000ED34 /**< Memory Management Fault Address */
|
||||
#define SCB_FAULT_ADDR 0xE000ED38 /**< Bus Fault Address */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name VTABLE register bits
|
||||
* @{
|
||||
*/
|
||||
#define SCB_VTABLE_BASE 0x20000000 /**< Vector Table Base */
|
||||
#define SCB_VTABLE_OFFSET_M 0x1FFFFE00 /**< Vector Table Offset */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SCB_SYSCTRL register bits
|
||||
* @{
|
||||
*/
|
||||
#define SCB_SYSCTRL_SEVONPEND 0x00000010 /**< Wake up on pending */
|
||||
#define SCB_SYSCTRL_SLEEPDEEP 0x00000004 /**< Deep sleep enable */
|
||||
#define SCB_SYSCTRL_SLEEPEXIT 0x00000002 /**< Sleep on ISR exit */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
#endif /* SCB_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
119
cpu/cc2538/dev/smwdthrosc.h
Normal file
119
cpu/cc2538/dev/smwdthrosc.h
Normal file
|
|
@ -0,0 +1,119 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-smwdthrosc cc2538 Sleep Timer and Watchdog
|
||||
*
|
||||
* Register declarations for the cc2538 Sleep Timer and Watchdog
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register declarations and bit masks for the cc2538
|
||||
* Sleep Timer and Watchdog
|
||||
*/
|
||||
#ifndef SMWDTHROSC_H_
|
||||
#define SMWDTHROSC_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name ST and WDT Register offset declarations
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_WDCTL 0x400D5000 /**< Watchdog Control */
|
||||
#define SMWDTHROSC_ST0 0x400D5040 /**< ST count/compare value 0 */
|
||||
#define SMWDTHROSC_ST1 0x400D5044 /**< ST count/compare value 1 */
|
||||
#define SMWDTHROSC_ST2 0x400D5048 /**< ST count/compare value 2 */
|
||||
#define SMWDTHROSC_ST3 0x400D504C /**< ST count/compare value 3 */
|
||||
#define SMWDTHROSC_STLOAD 0x400D5050 /**< Compare value load status */
|
||||
#define SMWDTHROSC_STCC 0x400D5054 /**< ST capture control */
|
||||
#define SMWDTHROSC_STCS 0x400D5058 /**< ST capture status */
|
||||
#define SMWDTHROSC_STCV0 0x400D505C /**< ST capture value 0 */
|
||||
#define SMWDTHROSC_STCV1 0x400D5060 /**< ST capture value 1 */
|
||||
#define SMWDTHROSC_STCV2 0x400D5064 /**< ST capture value 2 */
|
||||
#define SMWDTHROSC_STCV3 0x400D5068 /**< ST capture value 3 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_WDCTL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_WDCTL_CLR 0x000000F0 /**< Clear timer mask */
|
||||
#define SMWDTHROSC_WDCTL_CLR_3 0x00000080 /**< Clear timer mask[3] */
|
||||
#define SMWDTHROSC_WDCTL_CLR_2 0x00000040 /**< Clear timer mask[2] */
|
||||
#define SMWDTHROSC_WDCTL_CLR_1 0x00000020 /**< Clear timer mask[1] */
|
||||
#define SMWDTHROSC_WDCTL_CLR_0 0x00000010 /**< Clear timer mask[0] */
|
||||
#define SMWDTHROSC_WDCTL_EN 0x00000008 /**< Enable mask */
|
||||
#define SMWDTHROSC_WDCTL_MODE 0x00000004 /**< Mode select mask */
|
||||
#define SMWDTHROSC_WDCTL_INT 0x00000003 /**< Interval Select mask */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_ST[0:3] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_ST0_ST0 0x000000FF /**< ST count/compare bits [7:0] */
|
||||
#define SMWDTHROSC_ST1_ST1 0x000000FF /**< ST count/compare bits [15:8] */
|
||||
#define SMWDTHROSC_ST2_ST2 0x000000FF /**< ST count/compare bits [23:16] */
|
||||
#define SMWDTHROSC_ST3_ST3 0x000000FF /**< ST count/compare bits [31:24] */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_STLOAD register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_STLOAD_STLOAD 0x00000001 /**< STx upload status signal */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_STCC register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_STCC_PORT 0x00000038 /**< Port select */
|
||||
#define SMWDTHROSC_STCC_PIN 0x00000007 /**< Pin select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_STCS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_STCS_VALID 0x00000001 /**< Capture valid flag */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SMWDTHROSC_STCV[0:3] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SMWDTHROSC_STCV0_STCV0 0x000000FF /**< ST capture bits [7:0] */
|
||||
#define SMWDTHROSC_STCV1_STCV1 0x000000FF /**< ST capture bits [15:8] */
|
||||
#define SMWDTHROSC_STCV2_STCV2 0x000000FF /**< ST capture bits [23:16] */
|
||||
#define SMWDTHROSC_STCV3_STCV3 0x000000FF /**< ST capture bits [32:24] */
|
||||
/** @} */
|
||||
|
||||
#endif /* SMWDTHROSC_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
112
cpu/cc2538/dev/soc-adc.h
Normal file
112
cpu/cc2538/dev/soc-adc.h
Normal file
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-soc-adc cc2538 ADC and RNG
|
||||
*
|
||||
* Register declarations for the cc2538 ADC and H/W RNG
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register declarations for the cc2538 ADC and H/W RNG
|
||||
*/
|
||||
#ifndef SOC_ADC_H_
|
||||
#define SOC_ADC_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name ADC and RNG Register offset declarations
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_ADCCON1 0x400D7000 /**< ADC Control 1 */
|
||||
#define SOC_ADC_ADCCON2 0x400D7004 /**< ADC Control 2 */
|
||||
#define SOC_ADC_ADCCON3 0x400D7008 /**< ADC Control 3 */
|
||||
#define SOC_ADC_ADCL 0x400D700C /**< ADC Result, least significant part */
|
||||
#define SOC_ADC_ADCH 0x400D7010 /**< ADC Result, most significant part */
|
||||
#define SOC_ADC_RNDL 0x400D7014 /**< RNG low byte */
|
||||
#define SOC_ADC_RNDH 0x400D7018 /**< RNG high byte */
|
||||
#define SOC_ADC_CMPCTL 0x400D7024 /**< Analog comparator control and status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_ADCCON1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_ADCCON1_EOC 0x00000080 /**< End of conversion */
|
||||
#define SOC_ADC_ADCCON1_ST 0x00000040 /**< Start conversion */
|
||||
#define SOC_ADC_ADCCON1_STSEL 0x00000030 /**< Start select */
|
||||
#define SOC_ADC_ADCCON1_RCTRL 0x0000000C /**< Controls the 16-bit RNG */
|
||||
#define SOC_ADC_ADCCON1_RCTRL1 0x00000008 /**< RCTRL high bit */
|
||||
#define SOC_ADC_ADCCON1_RCTRL0 0x00000004 /**< RCTRL low bit */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_ADCCON2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_ADCCON2_SREF 0x000000C0 /**< Reference voltage for sequence */
|
||||
#define SOC_ADC_ADCCON2_SDIV 0x00000030 /**< Decimation rate for sequence */
|
||||
#define SOC_ADC_ADCCON2_SCH 0x0000000F /**< Sequence channel select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_ADCCON3 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_ADCCON3_EREF 0x000000C0 /**< Reference voltage for extra */
|
||||
#define SOC_ADC_ADCCON3_EDIV 0x00000030 /**< Decimation rate for extra */
|
||||
#define SOC_ADC_ADCCON3_ECH 0x0000000F /**< Single channel select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_ADC[L:H] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_ADCL_ADC 0x000000FC /**< ADC Result, least significant part */
|
||||
#define SOC_ADC_ADCH_ADC 0x000000FF /**< ADC Result, most significant part */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_RND[L:H] register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_RNDL_RNDL 0x000000FF /**< Random value/seed or CRC result low byte */
|
||||
#define SOC_ADC_RNDH_RNDH 0x000000FF /**< Random value or CRC result/input data, high byte */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SOC_ADC_CMPCTL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SOC_ADC_CMPCTL_EN 0x00000002 /**< Comparator enable */
|
||||
#define SOC_ADC_CMPCTL_OUTPUT 0x00000001 /**< Comparator output */
|
||||
/** @} */
|
||||
|
||||
#endif /* SOC_ADC_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
75
cpu/cc2538/dev/sys-ctrl.c
Normal file
75
cpu/cc2538/dev/sys-ctrl.c
Normal file
|
|
@ -0,0 +1,75 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-sys-ctrl
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 System Control driver
|
||||
*/
|
||||
#include "reg.h"
|
||||
#include "cpu.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
sys_ctrl_init()
|
||||
{
|
||||
uint32_t val;
|
||||
|
||||
/*
|
||||
* Desired Clock Ctrl configuration:
|
||||
* 32KHz source: RC
|
||||
* System Clock: 32 MHz
|
||||
* Power Down Unused
|
||||
* I/O Div: 16MHz
|
||||
* Sys Div: 16MHz
|
||||
* Rest: Don't care
|
||||
*/
|
||||
|
||||
val = SYS_CTRL_CLOCK_CTRL_OSC32K | SYS_CTRL_CLOCK_CTRL_OSC_PD
|
||||
| SYS_CTRL_CLOCK_CTRL_IO_DIV_16MHZ | SYS_CTRL_CLOCK_CTRL_SYS_DIV_16MHZ;
|
||||
REG(SYS_CTRL_CLOCK_CTRL) = val;
|
||||
|
||||
while((REG(SYS_CTRL_CLOCK_STA) & SYS_CTRL_CLOCK_STA_OSC) != 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
sys_ctrl_reset()
|
||||
{
|
||||
REG(SYS_CTRL_PWRDBG) = SYS_CTRL_PWRDBG_FORCE_WARM_RESET;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
248
cpu/cc2538/dev/sys-ctrl.h
Normal file
248
cpu/cc2538/dev/sys-ctrl.h
Normal file
|
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-sys-ctrl cc2538 System Control
|
||||
*
|
||||
* Driver for the cc2538 System Control Module
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538 System Control driver
|
||||
*/
|
||||
#ifndef SYS_CTRL_H_
|
||||
#define SYS_CTRL_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SysCtrl Constants, used by the SYS_DIV and IO_DIV bits of the
|
||||
* SYS_CTRL_CLOCK_CTRL register
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_32MHZ 32000000
|
||||
#define SYS_CTRL_16MHZ 16000000
|
||||
#define SYS_CTRL_8MHZ 8000000
|
||||
#define SYS_CTRL_4MHZ 4000000
|
||||
#define SYS_CTRL_2MHZ 2000000
|
||||
#define SYS_CTRL_1MHZ 1000000
|
||||
#define SYS_CTRL_500KHZ 500000
|
||||
#define SYS_CTRL_250KHZ 250000
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Definitions of Sys Ctrl registers
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_CLOCK_CTRL 0x400D2000 /**< Clock control register */
|
||||
#define SYS_CTRL_CLOCK_STA 0x400D2004 /**< Clock status register */
|
||||
#define SYS_CTRL_RCGCGPT 0x400D2008 /**< GPT[3:0] clocks - active mode */
|
||||
#define SYS_CTRL_SCGCGPT 0x400D200C /**< GPT[3:0] clocks - sleep mode */
|
||||
#define SYS_CTRL_DCGCGPT 0x400D2010 /**< GPT[3:0] clocks - PM0 */
|
||||
#define SYS_CTRL_SRGPT 0x400D2014 /**< GPT[3:0] reset control */
|
||||
#define SYS_CTRL_RCGCSSI 0x400D2018 /**< SSI[1:0] clocks - active mode */
|
||||
#define SYS_CTRL_SCGCSSI 0x400D201C /**< SSI[1:0] clocks - sleep mode */
|
||||
#define SYS_CTRL_DCGCSSI 0x400D2020 /**< SSI[1:0] clocks - PM0 mode */
|
||||
#define SYS_CTRL_SRSSI 0x400D2024 /**< SSI[1:0] reset control */
|
||||
#define SYS_CTRL_RCGCUART 0x400D2028 /**< UART[1:0] clocks - active mode */
|
||||
#define SYS_CTRL_SCGCUART 0x400D202C /**< UART[1:0] clocks - sleep mode */
|
||||
#define SYS_CTRL_DCGCUART 0x400D2030 /**< UART[1:0] clocks - PM0 */
|
||||
#define SYS_CTRL_SRUART 0x400D2034 /**< UART[1:0] reset control */
|
||||
#define SYS_CTRL_RCGCI2C 0x400D2038 /**< I2C clocks - active mode */
|
||||
#define SYS_CTRL_SCGCI2C 0x400D203C /**< I2C clocks - sleep mode */
|
||||
#define SYS_CTRL_DCGCI2C 0x400D2040 /**< I2C clocks - PM0 */
|
||||
#define SYS_CTRL_SRI2C 0x400D2044 /**< I2C clocks - reset control */
|
||||
#define SYS_CTRL_RCGCSEC 0x400D2048 /**< Sec Mod clocks - active mode */
|
||||
#define SYS_CTRL_SCGCSEC 0x400D204C /**< Sec Mod clocks - sleep mode */
|
||||
#define SYS_CTRL_DCGCSEC 0x400D2050 /**< Sec Mod clocks - PM0 */
|
||||
#define SYS_CTRL_SRSEC 0x400D2054 /**< Sec Mod reset control */
|
||||
#define SYS_CTRL_PMCTL 0x400D2058 /**< Power Mode Control */
|
||||
#define SYS_CTRL_SRCRC 0x400D205C /**< CRC on state retention */
|
||||
#define SYS_CTRL_PWRDBG 0x400D2074 /**< Power debug register */
|
||||
#define SYS_CTRL_CLD 0x400D2080 /**< clock loss detection feature */
|
||||
#define SYS_CTRL_IWE 0x400D2094 /**< interrupt wake-up. */
|
||||
#define SYS_CTRL_I_MAP 0x400D2098 /**< Interrupt map select */
|
||||
#define SYS_CTRL_RCGCRFC 0x400D20A8 /**< RF Core clocks - active mode */
|
||||
#define SYS_CTRL_SCGCRFC 0x400D20AC /**< RF Core clocks - Sleep mode */
|
||||
#define SYS_CTRL_DCGCRFC 0x400D20B0 /**< RF Core clocks - PM0 */
|
||||
#define SYS_CTRL_EMUOVR 0x400D20B4 /**< Emulator override */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_CLOCK_CTRL register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_CLOCK_CTRL_OSC32K_CALDIS 0x02000000
|
||||
#define SYS_CTRL_CLOCK_CTRL_OSC32K 0x01000000
|
||||
#define SYS_CTRL_CLOCK_CTRL_AMP_DET 0x00200000
|
||||
#define SYS_CTRL_CLOCK_CTRL_OSC_PD 0x00020000
|
||||
#define SYS_CTRL_CLOCK_CTRL_OSC 0x00010000
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV 0x00000700
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV 0x00000007
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_CLOCK_STA register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_CLOCK_STA_SYNC_32K 0x04000000
|
||||
#define SYS_CTRL_CLOCK_STA_OSC32K_CALDIS 0x02000000
|
||||
#define SYS_CTRL_CLOCK_STA_OSC32K 0x01000000
|
||||
#define SYS_CTRL_CLOCK_STA_RST 0x00C00000
|
||||
#define SYS_CTRL_CLOCK_STA_SOURCE_CHANGE 0x00100000
|
||||
#define SYS_CTRL_CLOCK_STA_XOSC_STB 0x00080000
|
||||
#define SYS_CTRL_CLOCK_STA_HSOSC_STB 0x00040000
|
||||
#define SYS_CTRL_CLOCK_STA_OSC_PD 0x00020000
|
||||
#define SYS_CTRL_CLOCK_STA_OSC 0x00010000
|
||||
#define SYS_CTRL_CLOCK_STA_IO_DIV 0x00000700
|
||||
#define SYS_CTRL_CLOCK_STA_RTCLK_FREQ 0x00000018
|
||||
#define SYS_CTRL_CLOCK_STA_SYS_DIV 0x00000007
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_RCGCGPT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_RCGCGPT_GPT3 0x00000008 /**< GPT3 clock enable, CPU running */
|
||||
#define SYS_CTRL_RCGCGPT_GPT2 0x00000004 /**< GPT2 clock enable, CPU running */
|
||||
#define SYS_CTRL_RCGCGPT_GPT1 0x00000002 /**< GPT1 clock enable, CPU running */
|
||||
#define SYS_CTRL_RCGCGPT_GPT0 0x00000001 /**< GPT0 clock enable, CPU running */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_SCGCGPT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_SCGCGPT_GPT3 0x00000008 /**< GPT3 clock enable, CPU IDLE */
|
||||
#define SYS_CTRL_SCGCGPT_GPT2 0x00000004 /**< GPT2 clock enable, CPU IDLE */
|
||||
#define SYS_CTRL_SCGCGPT_GPT1 0x00000002 /**< GPT1 clock enable, CPU IDLE */
|
||||
#define SYS_CTRL_SCGCGPT_GPT0 0x00000001 /**< GPT0 clock enable, CPU IDLE */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_DCGCGPT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_DCGCGPT_GPT3 0x00000008 /**< GPT3 clock enable, PM0 */
|
||||
#define SYS_CTRL_DCGCGPT_GPT2 0x00000004 /**< GPT2 clock enable, PM0 */
|
||||
#define SYS_CTRL_DCGCGPT_GPT1 0x00000002 /**< GPT1 clock enable, PM0 */
|
||||
#define SYS_CTRL_DCGCGPT_GPT0 0x00000001 /**< GPT0 clock enable, PM0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_SRGPT register bits
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_SRGPT_GPT3 0x00000008 /**< GPT3 is reset */
|
||||
#define SYS_CTRL_SRGPT_GPT2 0x00000004 /**< GPT2 is reset */
|
||||
#define SYS_CTRL_SRGPT_GPT1 0x00000002 /**< GPT1 is reset */
|
||||
#define SYS_CTRL_SRGPT_GPT0 0x00000001 /**< GPT0 is reset */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_PWRDBG register bits
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_PWRDBG_FORCE_WARM_RESET 0x00000008
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Possible values for the SYS_CTRL_CLOCK_CTRL_SYS_DIV bits
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_32MHZ 0x00000000
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_16MHZ 0x00000001
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_8MHZ 0x00000002
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_4MHZ 0x00000003
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_2MHZ 0x00000004
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_1MHZ 0x00000005
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_500KHZ 0x00000006
|
||||
#define SYS_CTRL_CLOCK_CTRL_SYS_DIV_250KHZ 0x00000007
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name Possible values for the SYS_CTRL_CLOCK_CTRL_IO_DIV bits
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_32MHZ 0x00000000
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_16MHZ 0x00000100
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_8MHZ 0x00000200
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_4MHZ 0x00000300
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_2MHZ 0x00000400
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_1MHZ 0x00000500
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_500KHZ 0x00000600
|
||||
#define SYS_CTRL_CLOCK_CTRL_IO_DIV_250KHZ 0x00000700
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_RCGCUART Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_RCGCUART_UART1 0x00000002 /**< UART1 Clock, CPU running */
|
||||
#define SYS_CTRL_RCGCUART_UART0 0x00000001 /**< UART0 Clock, CPU running */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_SCGCUART Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_SCGCUART_UART1 0x00000002 /**< UART1 Clock, CPU IDLE */
|
||||
#define SYS_CTRL_SCGCUART_UART0 0x00000001 /**< UART0 Clock, CPU IDLE */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_RCGCUART Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_DCGCUART_UART1 0x00000002 /**< UART1 Clock, PM0 */
|
||||
#define SYS_CTRL_DCGCUART_UART0 0x00000001 /**< UART0 Clock, PM0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_SRUART register bits
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_SRUART_UART1 0x00000002 /**< UART1 module is reset */
|
||||
#define SYS_CTRL_SRUART_UART0 0x00000001 /**< UART0 module is reset */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SYS_CTRL_PMCTL register values
|
||||
* @{
|
||||
*/
|
||||
#define SYS_CTRL_PMCTL_PM3 0x00000003 /**< PM3 */
|
||||
#define SYS_CTRL_PMCTL_PM2 0x00000002 /**< PM2 */
|
||||
#define SYS_CTRL_PMCTL_PM1 0x00000001 /**< PM1 */
|
||||
#define SYS_CTRL_PMCTL_PM0 0x00000000 /**< PM0 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SysCtrl functions
|
||||
* @{
|
||||
*/
|
||||
/** \brief Initialises the System Control Driver. The main purpose of this
|
||||
* function is to power up and select clocks and oscillators */
|
||||
void sys_ctrl_init();
|
||||
|
||||
/** \brief Generates a warm reset through the SYS_CTRL_PWRDBG register */
|
||||
void sys_ctrl_reset();
|
||||
|
||||
/** @} */
|
||||
|
||||
#endif /* SYS_CTRL_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
53
cpu/cc2538/dev/systick.h
Normal file
53
cpu/cc2538/dev/systick.h
Normal file
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http:/www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \file
|
||||
* Header for with definitions related to the cc2538 SysTick
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef SYSTICK_H_
|
||||
#define SYSTICK_H_
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* SysTick Register Definitions */
|
||||
#define SYSTICK_STCTRL 0xE000E010 /* Control and Status */
|
||||
#define SYSTICK_STRELOAD 0xE000E014 /* Reload Value */
|
||||
#define SYSTICK_STCURRENT 0xE000E018 /* Current Value */
|
||||
#define SYSTICK_STCAL 0xE000E01C /* SysTick Calibration */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Bit Definitions for the STCTRL Register */
|
||||
#define SYSTICK_STCTRL_COUNT 0x00010000 /* Count Flag */
|
||||
#define SYSTICK_STCTRL_CLK_SRC 0x00000004 /* Clock Source */
|
||||
#define SYSTICK_STCTRL_INTEN 0x00000002 /* Interrupt Enable */
|
||||
#define SYSTICK_STCTRL_ENABLE 0x00000001 /* Enable */
|
||||
|
||||
#endif /* SYSTICK_H_ */
|
||||
|
||||
/** @} */
|
||||
172
cpu/cc2538/dev/uart.c
Normal file
172
cpu/cc2538/dev/uart.c
Normal file
|
|
@ -0,0 +1,172 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-uart
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 UART driver
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/energest.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "dev/ioc.h"
|
||||
#include "dev/gpio.h"
|
||||
#include "dev/uart.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
|
||||
static int (* input_handler)(unsigned char c);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
reset(void)
|
||||
{
|
||||
uint32_t lchr;
|
||||
|
||||
/* Make sure the UART is disabled before trying to configure it */
|
||||
REG(UART_0_BASE | UART_CTL) = UART_CTL_TXE | UART_CTL_RXE;
|
||||
|
||||
/* Clear error status */
|
||||
REG(UART_0_BASE | UART_ECR) = 0xFF;
|
||||
|
||||
/* Store LCHR configuration */
|
||||
lchr = REG(UART_0_BASE | UART_LCRH);
|
||||
|
||||
/* Flush FIFOs by clearing LCHR.FEN */
|
||||
REG(UART_0_BASE | UART_LCRH) = 0;
|
||||
|
||||
/* Restore LCHR configuration */
|
||||
REG(UART_0_BASE | UART_LCRH) = lchr;
|
||||
|
||||
/* UART Enable */
|
||||
REG(UART_0_BASE | UART_CTL) |= UART_CTL_UARTEN;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
uart_init(void)
|
||||
{
|
||||
/* Enable clock for the UART while Running, in Sleep and Deep Sleep */
|
||||
REG(SYS_CTRL_RCGCUART) |= SYS_CTRL_RCGCUART_UART0;
|
||||
REG(SYS_CTRL_SCGCUART) |= SYS_CTRL_DCGCUART_UART0;
|
||||
REG(SYS_CTRL_DCGCUART) |= SYS_CTRL_DCGCUART_UART0;
|
||||
|
||||
/* Run on SYS_DIV */
|
||||
REG(UART_0_BASE | UART_CC) = 0;
|
||||
|
||||
/* PA1: UART TX */
|
||||
REG(IOC_PA1_SEL) = IOC_PXX_SEL_UART0_TXD;
|
||||
|
||||
/* PA0: UART RX */
|
||||
REG(IOC_UARTRXD_UART0) = IOC_INPUT_SEL_PA0;
|
||||
|
||||
/* Pad Control: PA1 Output Enable */
|
||||
REG(IOC_PA1_OVER) = IOC_OVERRIDE_OE;
|
||||
|
||||
/* Set PA[1:0] to peripheral mode */
|
||||
REG(GPIO_A_BASE | GPIO_AFSEL) |= (0x00000002 | 0x00000001);
|
||||
|
||||
/*
|
||||
* UART Interrupt Masks:
|
||||
* Acknowledge RX and RX Timeout
|
||||
* Acknowledge Framing, Overrun and Break Errors
|
||||
*/
|
||||
REG(UART_0_BASE | UART_IM) = UART_IM_RXIM | UART_IM_RTIM;
|
||||
REG(UART_0_BASE | UART_IM) |= UART_IM_OEIM | UART_IM_BEIM | UART_IM_FEIM;
|
||||
|
||||
REG(UART_0_BASE | UART_IFLS) =
|
||||
UART_IFLS_RXIFLSEL_1_8 | UART_IFLS_TXIFLSEL_1_2;
|
||||
|
||||
/* Make sure the UART is disabled before trying to configure it */
|
||||
REG(UART_0_BASE | UART_CTL) = UART_CTL_TXE | UART_CTL_RXE;
|
||||
|
||||
/* Baud Rate Generation */
|
||||
REG(UART_0_BASE | UART_IBRD) = UART_CONF_IBRD;
|
||||
REG(UART_0_BASE | UART_FBRD) = UART_CONF_FBRD;
|
||||
|
||||
/* UART Control: 8N1 with FIFOs */
|
||||
REG(UART_0_BASE | UART_LCRH) = UART_LCRH_WLEN_8 | UART_LCRH_FEN;
|
||||
|
||||
/* UART Enable */
|
||||
REG(UART_0_BASE | UART_CTL) |= UART_CTL_UARTEN;
|
||||
|
||||
/* Enable UART0 Interrupts */
|
||||
nvic_interrupt_enable(NVIC_INT_UART0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
uart_set_input(int (* input)(unsigned char c))
|
||||
{
|
||||
input_handler = input;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
uart_write_byte(uint8_t b)
|
||||
{
|
||||
/* Block if the TX FIFO is full */
|
||||
while(REG(UART_0_BASE | UART_FR) & UART_FR_TXFF);
|
||||
|
||||
REG(UART_0_BASE | UART_DR) = b;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
uart_isr(void)
|
||||
{
|
||||
uint16_t mis;
|
||||
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
/* Store the current MIS and clear all flags early, except the RTM flag.
|
||||
* This will clear itself when we read out the entire FIFO contents */
|
||||
mis = REG(UART_0_BASE | UART_MIS) & 0x0000FFFF;
|
||||
|
||||
REG(UART_0_BASE | UART_ICR) = 0x0000FFBF;
|
||||
|
||||
if(mis & (UART_MIS_RXMIS | UART_MIS_RTMIS)) {
|
||||
while(!(REG(UART_0_BASE | UART_FR) & UART_FR_RXFE)) {
|
||||
if(input_handler != NULL) {
|
||||
input_handler((unsigned char)(REG(UART_0_BASE | UART_DR) & 0xFF));
|
||||
} else {
|
||||
/* To prevent an Overrun Error, we need to flush the FIFO even if we
|
||||
* don't have an input_handler. Use mis as a data trash can */
|
||||
mis = REG(UART_0_BASE | UART_DR);
|
||||
}
|
||||
}
|
||||
} else if(mis & (UART_MIS_OEMIS | UART_MIS_BEMIS | UART_MIS_FEMIS)) {
|
||||
/* ISR triggered due to some error condition */
|
||||
reset();
|
||||
}
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
|
||||
/** @} */
|
||||
382
cpu/cc2538/dev/uart.h
Normal file
382
cpu/cc2538/dev/uart.h
Normal file
|
|
@ -0,0 +1,382 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-uart cc2538 UART
|
||||
*
|
||||
* Driver for the cc2538 UART controller
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538 UART driver
|
||||
*/
|
||||
#ifndef UART_H_
|
||||
#define UART_H_
|
||||
|
||||
#include "contiki.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART base addresses
|
||||
* @{
|
||||
*/
|
||||
#define UART_0_BASE 0x4000C000
|
||||
#define UART_1_BASE 0x4000D000
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Baud rate defines
|
||||
*
|
||||
* Used in uart_init() to set the values of UART_IBRD and UART_FBRD in order to
|
||||
* achieve some standard baud rates. These defines assume that the UART is
|
||||
* clocked at 16MHz and that Clock Div is 16 (UART_CTL:HSE clear)
|
||||
* @{
|
||||
*/
|
||||
#define UART_IBRD_115200 8 /**< IBRD value for baud rate 115200 */
|
||||
#define UART_FBRD_115200 44 /**< FBRD value for baud rate 115200 */
|
||||
#define UART_IBRD_230400 4 /**< IBRD value for baud rate 230400 */
|
||||
#define UART_FBRD_230400 22 /**< FBRD value for baud rate 230400 */
|
||||
#define UART_IBRD_460800 2 /**< IBRD value for baud rate 230400 */
|
||||
#define UART_FBRD_460800 11 /**< FBRD value for baud rate 230400 */
|
||||
|
||||
#if UART_CONF_BAUD_RATE==115200
|
||||
#define UART_CONF_IBRD UART_IBRD_115200
|
||||
#define UART_CONF_FBRD UART_FBRD_115200
|
||||
#elif UART_CONF_BAUD_RATE==230400
|
||||
#define UART_CONF_IBRD UART_IBRD_230400
|
||||
#define UART_CONF_FBRD UART_FBRD_230400
|
||||
#elif UART_CONF_BAUD_RATE==460800
|
||||
#define UART_CONF_IBRD UART_IBRD_460800
|
||||
#define UART_CONF_FBRD UART_FBRD_460800
|
||||
#else /* Bail out with an error unless the user provided custom values */
|
||||
#if !(defined UART_CONF_IBRD && defined UART_CONF_FBRD)
|
||||
#error "UART baud rate misconfigured and custom IBRD/FBRD values not provided"
|
||||
#error "Check the value of UART_CONF_BAUD_RATE in contiki-conf.h or project-conf.h"
|
||||
#error "Supported values are 115200, 230400 and 460800. Alternatively, you can"
|
||||
#error "provide custom values for UART_CONF_IBRD and UART_CONF_FBRD"
|
||||
#endif
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART Register Offsets
|
||||
* @{
|
||||
*/
|
||||
#define UART_DR 0x00000000 /**< UART data */
|
||||
#define UART_RSR 0x00000004 /**< UART RX status and err clear */
|
||||
#define UART_ECR 0x00000004 /**< UART RX status and err clear */
|
||||
#define UART_FR 0x00000018 /**< UART flag */
|
||||
#define UART_ILPR 0x00000020 /**< UART IrDA low-power */
|
||||
#define UART_IBRD 0x00000024 /**< UART BAUD divisor: integer */
|
||||
#define UART_FBRD 0x00000028 /**< UART BAUD divisor: fractional */
|
||||
#define UART_LCRH 0x0000002C /**< UART line control */
|
||||
#define UART_CTL 0x00000030 /**< UART control */
|
||||
#define UART_IFLS 0x00000034 /**< UART interrupt FIFO level */
|
||||
#define UART_IM 0x00000038 /**< UART interrupt mask */
|
||||
#define UART_RIS 0x0000003C /**< UART raw interrupt status */
|
||||
#define UART_MIS 0x00000040 /**< UART masked interrupt status */
|
||||
#define UART_ICR 0x00000044 /**< UART interrupt clear */
|
||||
#define UART_DMACTL 0x00000048 /**< UART DMA control */
|
||||
#define UART_LCTL 0x00000090 /**< UART LIN control */
|
||||
#define UART_LSS 0x00000094 /**< UART LIN snap shot */
|
||||
#define UART_LTIM 0x00000098 /**< UART LIN timer */
|
||||
#define UART_NINEBITADDR 0x000000A4 /**< UART 9-bit self address */
|
||||
#define UART_NINEBITAMASK 0x000000A8 /**< UART 9-bit self address mask */
|
||||
#define UART_PP 0x00000FC0 /**< UART peripheral properties */
|
||||
#define UART_CC 0x00000FC8 /**< UART clock configuration */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_DR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_DR_OE 0x00000800 /**< UART overrun error */
|
||||
#define UART_DR_BE 0x00000400 /**< UART break error */
|
||||
#define UART_DR_PE 0x00000200 /**< UART parity error */
|
||||
#define UART_DR_FE 0x00000100 /**< UART framing error */
|
||||
#define UART_DR_DATA 0x000000FF /**< Data transmitted or received */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_RSR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_RSR_OE 0x00000008 /**< UART overrun error */
|
||||
#define UART_RSR_BE 0x00000004 /**< UART break error */
|
||||
#define UART_RSR_PE 0x00000002 /**< UART parity error */
|
||||
#define UART_RSR_FE 0x00000001 /**< UART framing error */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_ECR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_ECR_DATA 0x000000FF /**< Error clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_FR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_FR_TXFE 0x00000080 /**< UART transmit FIFO empty */
|
||||
#define UART_FR_RXFF 0x00000040 /**< UART receive FIFO full */
|
||||
#define UART_FR_TXFF 0x00000020 /**< UART transmit FIFO full */
|
||||
#define UART_FR_RXFE 0x00000010 /**< UART receive FIFO empty */
|
||||
#define UART_FR_BUSY 0x00000008 /**< UART busy */
|
||||
#define UART_FR_CTS 0x00000001 /**< Clear to send */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_ILPR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_ILPR_ILPDVSR 0x000000FF /**< IrDA low-power divisor */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_IBRD Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_IBRD_DIVINT 0x0000FFFF /**< Integer baud-rate divisor */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_FPRD Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_FBRD_DIVFRAC 0x0000003F /**< Fractional baud-rate divisor */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_LCRH Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_LCRH_SPS 0x00000080 /**< UART stick parity select */
|
||||
#define UART_LCRH_WLEN 0x00000060 /**< UART word length */
|
||||
#define UART_LCRH_FEN 0x00000010 /**< UART enable FIFOs */
|
||||
#define UART_LCRH_STP2 0x00000008 /**< UART two stop bits select */
|
||||
#define UART_LCRH_EPS 0x00000004 /**< UART even parity select */
|
||||
#define UART_LCRH_PEN 0x00000002 /**< UART parity enable */
|
||||
#define UART_LCRH_BRK 0x00000001 /**< UART send break */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_LCRH_WLEN Values
|
||||
* @{
|
||||
*/
|
||||
#define UART_LCRH_WLEN_8 0x00000060
|
||||
#define UART_LCRH_WLEN_7 0x00000040
|
||||
#define UART_LCRH_WLEN_6 0x00000020
|
||||
#define UART_LCRH_WLEN_5 0x00000000
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_CTL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_CTL_RXE 0x00000200 /**< UART receive enable */
|
||||
#define UART_CTL_TXE 0x00000100 /**< UART transmit enable */
|
||||
#define UART_CTL_LBE 0x00000080 /**< UART loop back enable */
|
||||
#define UART_CTL_LIN 0x00000040 /**< LIN mode enable */
|
||||
#define UART_CTL_HSE 0x00000020 /**< High-speed enable */
|
||||
#define UART_CTL_EOT 0x00000010 /**< End of transmission */
|
||||
#define UART_CTL_SMART 0x00000008 /**< ISO 7816 Smart Card support */
|
||||
#define UART_CTL_SIRLP 0x00000004 /**< UART SIR low-power mode */
|
||||
#define UART_CTL_SIREN 0x00000002 /**< UART SIR enable */
|
||||
#define UART_CTL_UARTEN 0x00000001 /**< UART enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_IFLS Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_IFLS_RXIFLSEL 0x00000038 /**< UART RX FIFO level select */
|
||||
#define UART_IFLS_TXIFLSEL 0x00000007 /**< UART TX FIFO level select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_IFLS_RXIFLSEL Possible Values
|
||||
* @{
|
||||
*/
|
||||
#define UART_IFLS_RXIFLSEL_7_8 0x00000020 /**< UART RX FIFO >= 7/8 full */
|
||||
#define UART_IFLS_RXIFLSEL_3_4 0x00000018 /**< UART RX FIFO >= 3/4 full */
|
||||
#define UART_IFLS_RXIFLSEL_1_2 0x00000010 /**< UART RX FIFO >= 1/2 full */
|
||||
#define UART_IFLS_RXIFLSEL_1_4 0x00000008 /**< UART RX FIFO >= 1/4 full */
|
||||
#define UART_IFLS_RXIFLSEL_1_8 0x00000000 /**< UART RX FIFO >= 1/8 full */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_IFLS_TXIFLSEL Possible Values
|
||||
* @{
|
||||
*/
|
||||
#define UART_IFLS_TXIFLSEL_1_8 0x00000004 /**< UART TX FIFO >= 1/8 empty */
|
||||
#define UART_IFLS_TXIFLSEL_1_4 0x00000003 /**< UART TX FIFO >= 1/4 empty */
|
||||
#define UART_IFLS_TXIFLSEL_1_2 0x00000002 /**< UART TX FIFO >= 1/2 empty */
|
||||
#define UART_IFLS_TXIFLSEL_3_4 0x00000001 /**< UART TX FIFO >= 3/4 empty */
|
||||
#define UART_IFLS_TXIFLSEL_7_8 0x00000000 /**< UART TX FIFO >= 7/8 empty */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_IM Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_IM_LME5IM 0x00008000 /**< LIN mode edge 5 intr mask */
|
||||
#define UART_IM_LME1IM 0x00004000 /**< LIN mode edge 1 intr mask */
|
||||
#define UART_IM_LMSBIM 0x00002000 /**< LIN mode sync break mask */
|
||||
#define UART_IM_NINEBITIM 0x00001000 /**< 9-bit mode interrupt mask */
|
||||
#define UART_IM_OEIM 0x00000400 /**< UART overrun error mask */
|
||||
#define UART_IM_BEIM 0x00000200 /**< UART break error mask */
|
||||
#define UART_IM_PEIM 0x00000100 /**< UART parity error mask */
|
||||
#define UART_IM_FEIM 0x00000080 /**< UART framing error */
|
||||
#define UART_IM_RTIM 0x00000040 /**< UART receive time-out mask */
|
||||
#define UART_IM_TXIM 0x00000020 /**< UART transmit intr mask */
|
||||
#define UART_IM_RXIM 0x00000010 /**< UART receive interrupt mask */
|
||||
#define UART_IM_CTSIM 0x00000002 /**< UART CTS modem mask */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_RIS Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_RIS_LME5RIS 0x00008000 /**< LIN mode edge 5 raw */
|
||||
#define UART_RIS_LME1RIS 0x00004000 /**< LIN mode edge 1 raw */
|
||||
#define UART_RIS_LMSBRIS 0x00002000 /**< LIN mode sync break raw */
|
||||
#define UART_RIS_NINEBITRIS 0x00001000 /**< 9-bit mode raw intr */
|
||||
#define UART_RIS_OERIS 0x00000400 /**< UART overrun error raw */
|
||||
#define UART_RIS_BERIS 0x00000200 /**< UART break error raw */
|
||||
#define UART_RIS_PERIS 0x00000100 /**< UART parity error raw */
|
||||
#define UART_RIS_FERIS 0x00000080 /**< UART framing error raw */
|
||||
#define UART_RIS_RTRIS 0x00000040 /**< UART RX time-out raw */
|
||||
#define UART_RIS_TXRIS 0x00000020 /**< UART transmit raw */
|
||||
#define UART_RIS_RXRIS 0x00000010 /**< UART receive raw */
|
||||
#define UART_RIS_CTSRIS 0x00000002 /**< UART CTS modem */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_RIS Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_MIS_LME5MIS 0x00008000 /**< LIN mode edge 5 masked stat */
|
||||
#define UART_MIS_LME1MIS 0x00004000 /**< LIN mode edge 1 masked stat */
|
||||
#define UART_MIS_LMSBMIS 0x00002000 /**< LIN mode sync br masked stat */
|
||||
#define UART_MIS_NINEBITMIS 0x00001000 /**< 9-bit mode masked stat */
|
||||
#define UART_MIS_OEMIS 0x00000400 /**< UART overrun err masked stat */
|
||||
#define UART_MIS_BEMIS 0x00000200 /**< UART break err masked stat */
|
||||
#define UART_MIS_PEMIS 0x00000100 /**< UART parity err masked stat */
|
||||
#define UART_MIS_FEMIS 0x00000080 /**< UART framing err masked stat */
|
||||
#define UART_MIS_RTMIS 0x00000040 /**< UART RX time-out masked stat */
|
||||
#define UART_MIS_TXMIS 0x00000020 /**< UART TX masked intr stat */
|
||||
#define UART_MIS_RXMIS 0x00000010 /**< UART RX masked intr stat */
|
||||
#define UART_MIS_CTSMIS 0x00000002 /**< UART CTS modem masked stat */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_ICR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_ICR_LME5IC 0x00008000 /**< LIN mode edge 5 intr clear */
|
||||
#define UART_ICR_LME1IC 0x00004000 /**< LIN mode edge 1 intr clear */
|
||||
#define UART_ICR_LMSBIC 0x00002000 /**< LIN mode sync br intr clear */
|
||||
#define UART_ICR_NINEBITIC 0x00001000 /**< 9-bit mode intr clear */
|
||||
#define UART_ICR_OEIC 0x00000400 /**< Overrun error intr clear */
|
||||
#define UART_ICR_BEIC 0x00000200 /**< Break error intr clear */
|
||||
#define UART_ICR_PEIC 0x00000100 /**< Parity error intr clear */
|
||||
#define UART_ICR_FEIC 0x00000080 /**< Framing error intr clear */
|
||||
#define UART_ICR_RTIC 0x00000040 /**< Receive time-out intr clear */
|
||||
#define UART_ICR_TXIC 0x00000020 /**< Transmit intr clear */
|
||||
#define UART_ICR_RXIC 0x00000010 /**< Receive intr clear */
|
||||
#define UART_ICR_CTSIC 0x00000002 /**< UART CTS modem intr clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_DMACTL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_DMACTL_DMAERR 0x00000004 /**< DMA on error */
|
||||
#define UART_DMACTL_TXDMAE 0x00000002 /**< Transmit DMA enable */
|
||||
#define UART_DMACTL_RXDMAE 0x00000001 /**< Receive DMA enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_LCTL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_LCTL_BLEN 0x00000030 /**< Sync break length */
|
||||
#define UART_LCTL_MASTER 0x00000001 /**< LIN master enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_LSS Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_LSS_TSS 0x0000FFFF /**< Timer snap shot */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_LTIM Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_LTIM_TIMER 0x0000FFFF /**< Timer value */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_O_NINEBITADDR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_NINEBITADDR_NINEBITEN 0x00008000 /**< Enable 9-bit mode */
|
||||
#define UART_NINEBITADDR_ADDR 0x000000FF /**< Self address for 9-bit mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_O_NINEBITADDR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_NINEBITAMASK_RANGE 0x0000FF00 /**< Self addr range, 9-bit mode */
|
||||
#define UART_NINEBITAMASK_MASK 0x000000FF /**< Self addr mask, 9-bit mode */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_PP Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_PP_NB 0x00000002 /**< 9-bit support */
|
||||
#define UART_PP_SC 0x00000001 /**< Smart card support */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART_CC Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define UART_CC_CS 0x00000007 /**< UART BAUD & sys clock source */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** \brief Initialises the UART controller, configures I/O control
|
||||
* and interrupts */
|
||||
void uart_init(void);
|
||||
|
||||
/** \brief Sends a single character down the UART
|
||||
* \param b The character to transmit
|
||||
*/
|
||||
void uart_write_byte(uint8_t b);
|
||||
|
||||
/** \brief Assigns a callback to be called when the UART receives a byte
|
||||
* \param input A pointer to the function
|
||||
*/
|
||||
void uart_set_input(int (* input)(unsigned char c));
|
||||
|
||||
/** @} */
|
||||
|
||||
#endif /* UART_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
51
cpu/cc2538/dev/uart1.h
Normal file
51
cpu/cc2538/dev/uart1.h
Normal file
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-uart
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* This file really only exists because some examples rely on it.
|
||||
*
|
||||
* For instance, some examples do uart1_set_input(f). We re-write this to
|
||||
* uart_set_input
|
||||
*/
|
||||
#ifndef UART1_H_
|
||||
#define UART1_H_
|
||||
|
||||
#include "dev/uart.h"
|
||||
|
||||
#define BAUD2UBR(x) x
|
||||
#define uart1_set_input(f) uart_set_input(f)
|
||||
|
||||
#endif /* UART1_H_ */
|
||||
|
||||
/** @} */
|
||||
259
cpu/cc2538/dev/udma.c
Normal file
259
cpu/cc2538/dev/udma.c
Normal file
|
|
@ -0,0 +1,259 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-udma
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 micro-DMA driver
|
||||
*/
|
||||
#include "contiki-conf.h"
|
||||
#include "dev/udma.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
struct channel_ctrl {
|
||||
uint32_t src_end_ptr;
|
||||
uint32_t dst_end_ptr;
|
||||
uint32_t ctrl_word;
|
||||
uint32_t unused;
|
||||
};
|
||||
|
||||
static volatile struct channel_ctrl channel_config[UDMA_CONF_MAX_CHANNEL + 1]
|
||||
__attribute__ ((aligned(1024)));
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_init()
|
||||
{
|
||||
memset(&channel_config, 0, sizeof(channel_config));
|
||||
|
||||
REG(UDMA_CFG) = UDMA_CFG_MASTEN;
|
||||
|
||||
REG(UDMA_CTLBASE) = (uint32_t)(&channel_config);
|
||||
|
||||
nvic_interrupt_enable(NVIC_INT_UDMA);
|
||||
nvic_interrupt_enable(NVIC_INT_UDMA_ERR);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_set_channel_src(uint8_t channel, uint32_t src_end)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
channel_config[channel].src_end_ptr = src_end;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_set_channel_dst(uint8_t channel, uint32_t dst_end)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
channel_config[channel].dst_end_ptr = dst_end;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_set_channel_control_word(uint8_t channel, uint32_t ctrl)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
channel_config[channel].ctrl_word = ctrl;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_set_channel_assignment(uint8_t channel, uint8_t enc)
|
||||
{
|
||||
uint32_t base_chmap = UDMA_CHMAP0;
|
||||
uint8_t shift;
|
||||
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Calculate the address of the relevant CHMAP register */
|
||||
base_chmap += (channel >> 3) * 4;
|
||||
|
||||
/* Calculate the shift value for the correct CHMAP register bits */
|
||||
shift = (channel & 0x07);
|
||||
|
||||
/* Read CHMAPx value, zero out channel's bits and write the new value */
|
||||
REG(base_chmap) = (REG(base_chmap) & ~(0x0F << shift)) | (enc << shift);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_enable(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_ENASET) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_disable(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Writes of 0 have no effect, this no need for RMW */
|
||||
REG(UDMA_ENACLR) = 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_use_alternate(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_ALTSET) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_use_primary(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Writes of 0 have no effect, this no need for RMW */
|
||||
REG(UDMA_ALTCLR) = 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_prio_set_high(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_PRIOSET) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_prio_set_default(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Writes of 0 have no effect, this no need for RMW */
|
||||
REG(UDMA_PRIOCLR) = 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_use_burst(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_USEBURSTSET) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_use_single(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Writes of 0 have no effect, this no need for RMW */
|
||||
REG(UDMA_USEBURSTCLR) = 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_mask_set(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_REQMASKSET) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_mask_clr(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Writes of 0 have no effect, this no need for RMW */
|
||||
REG(UDMA_REQMASKCLR) = 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_channel_sw_request(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return;
|
||||
}
|
||||
|
||||
REG(UDMA_SWREQ) |= 1 << channel;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t
|
||||
udma_channel_get_mode(uint8_t channel)
|
||||
{
|
||||
if(channel > UDMA_CONF_MAX_CHANNEL) {
|
||||
return 0;
|
||||
}
|
||||
|
||||
return (channel_config[channel].ctrl_word & 0x07);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_isr()
|
||||
{
|
||||
/* Simply clear Channel interrupt status for now */
|
||||
REG(UDMA_CHIS) = UDMA_CHIS_CHIS;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
udma_err_isr()
|
||||
{
|
||||
/* Stub Implementation, just clear the error flag */
|
||||
REG(UDMA_ERRCLR) = 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
703
cpu/cc2538/dev/udma.h
Normal file
703
cpu/cc2538/dev/udma.h
Normal file
|
|
@ -0,0 +1,703 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-udma cc2538 micro-DMA
|
||||
*
|
||||
* Driver for the cc2538 uDMA controller
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register, macro and function declarations for the cc2538
|
||||
* micro-DMA controller module
|
||||
*/
|
||||
#ifndef UDMA_H_
|
||||
#define UDMA_H_
|
||||
|
||||
#include "contiki-conf.h"
|
||||
|
||||
/*
|
||||
* Enable all uDMA channels unless a conf file tells us to do otherwise.
|
||||
* Using all 31 channels will consume a lot of RAM for the channel control
|
||||
* data structure. Thus it's wise to set this define to the number of the
|
||||
* highest channel in use
|
||||
*/
|
||||
#ifndef UDMA_CONF_MAX_CHANNEL
|
||||
#define UDMA_CONF_MAX_CHANNEL 31
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name uDMA Register offset declarations
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_STAT 0x400FF000 /**< DMA status */
|
||||
#define UDMA_CFG 0x400FF004 /**< DMA configuration */
|
||||
#define UDMA_CTLBASE 0x400FF008 /**< DMA channel control base pointer */
|
||||
#define UDMA_ALTBASE 0x400FF00C /**< DMA alternate channel control base pointer */
|
||||
#define UDMA_WAITSTAT 0x400FF010 /**< DMA channel wait-on-request status */
|
||||
#define UDMA_SWREQ 0x400FF014 /**< DMA channel software request */
|
||||
#define UDMA_USEBURSTSET 0x400FF018 /**< DMA channel useburst set */
|
||||
#define UDMA_USEBURSTCLR 0x400FF01C /**< DMA channel useburst clear */
|
||||
#define UDMA_REQMASKSET 0x400FF020 /**< DMA channel request mask set */
|
||||
#define UDMA_REQMASKCLR 0x400FF024 /**< DMA channel request mask clear */
|
||||
#define UDMA_ENASET 0x400FF028 /**< DMA channel enable set */
|
||||
#define UDMA_ENACLR 0x400FF02C /**< DMA channel enable clear */
|
||||
#define UDMA_ALTSET 0x400FF030 /**< DMA channel primary alternate set */
|
||||
#define UDMA_ALTCLR 0x400FF034 /**< DMA channel primary alternate clear */
|
||||
#define UDMA_PRIOSET 0x400FF038 /**< DMA channel priority set */
|
||||
#define UDMA_PRIOCLR 0x400FF03C /**< DMA channel priority clear */
|
||||
#define UDMA_ERRCLR 0x400FF04C /**< DMA bus error clear */
|
||||
#define UDMA_CHASGN 0x400FF500 /**< DMA channel assignment */
|
||||
#define UDMA_CHIS 0x400FF504 /**< DMA channel interrupt status */
|
||||
#define UDMA_CHMAP0 0x400FF510 /**< DMA channel map select 0 */
|
||||
#define UDMA_CHMAP1 0x400FF514 /**< DMA channel map select 1 */
|
||||
#define UDMA_CHMAP2 0x400FF518 /**< DMA channel map select 2 */
|
||||
#define UDMA_CHMAP3 0x400FF51C /**< DMA channel map select 3 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_STAT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_STAT_DMACHANS 0x001F0000 /**< Available uDMA channels minus 1 */
|
||||
#define UDMA_STAT_STATE 0x000000F0 /**< Control state machine status */
|
||||
#define UDMA_STAT_MASTEN 0x00000001 /**< Master enable status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CFG register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CFG_MASTEN 0x00000001 /**< Controller master enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CTLBASE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CTLBASE_ADDR 0xFFFFFC00 /**< Channel control base address */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ALTBASE register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ALTBASE_ADDR 0xFFFFFFFF /**< Alternate channel address pointer */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_WAITSTAT register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_WAITSTAT_WAITREQ 0xFFFFFFFF /**< Channel [n] wait status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_SWREQ register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_SWREQ_SWREQ 0xFFFFFFFF /**< Channel [n] software request */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_USEBURSTSET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_USEBURSTSET_SET 0xFFFFFFFF /**< Channel [n] useburst set */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_USEBURSTCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_USEBURSTCLR_CLR 0xFFFFFFFF /**< Channel [n] useburst clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_REQMASKSET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_REQMASKSET_SET 0xFFFFFFFF /**< Channel [n] request mask set */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_REQMASKCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_REQMASKCLR_CLR 0xFFFFFFFF /**< Channel [n] request mask clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ENASET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ENASET_SET 0xFFFFFFFF /**< Channel [n] enable set */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ENACLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ENACLR_CLR 0xFFFFFFFF /**< Channel [n] enable clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ALTSET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ALTSET_SET 0xFFFFFFFF /**< Channel [n] alternate set */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ALTCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ALTCLR_CLR 0xFFFFFFFF /**< Channel [n] alternate clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_PRIOSET register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_PRIOSET_SET 0xFFFFFFFF /**< Channel [n] priority set */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_PRIOCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_PRIOCLR_CLR 0xFFFFFFFF /**< Channel [n] priority clear */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_ERRCLR register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_ERRCLR_ERRCLR 0x00000001 /**< uDMA bus error status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CHASGN register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHASGN_CHASGN 0xFFFFFFFF /**< Channel [n] assignment select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CHIS register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHIS_CHIS 0xFFFFFFFF /**< Channel [n] interrupt status */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CHMAP0 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHMAP0_CH7SEL 0xF0000000 /**< uDMA channel 7 source select */
|
||||
#define UDMA_CHMAP0_CH6SEL 0x0F000000 /**< uDMA channel 6 source select */
|
||||
#define UDMA_CHMAP0_CH5SEL 0x00F00000 /**< uDMA channel 5 source select */
|
||||
#define UDMA_CHMAP0_CH4SEL 0x000F0000 /**< uDMA channel 4 source select */
|
||||
#define UDMA_CHMAP0_CH3SEL 0x0000F000 /**< uDMA channel 3 source select */
|
||||
#define UDMA_CHMAP0_CH2SEL 0x00000F00 /**< uDMA channel 2 source select */
|
||||
#define UDMA_CHMAP0_CH1SEL 0x000000F0 /**< uDMA channel 1 source select */
|
||||
#define UDMA_CHMAP0_CH0SEL 0x0000000F /**< uDMA channel 0 source select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UDMA_CHMAP1 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHMAP1_CH15SEL 0xF0000000 /**< uDMA channel 15 source select */
|
||||
#define UDMA_CHMAP1_CH14SEL 0x0F000000 /**< uDMA channel 14 source select */
|
||||
#define UDMA_CHMAP1_CH13SEL 0x00F00000 /**< uDMA channel 13 source select */
|
||||
#define UDMA_CHMAP1_CH12SEL 0x000F0000 /**< uDMA channel 12 source select */
|
||||
#define UDMA_CHMAP1_CH11SEL 0x0000F000 /**< uDMA channel 11 source select */
|
||||
#define UDMA_CHMAP1_CH10SEL 0x00000F00 /**< uDMA channel 10 source select */
|
||||
#define UDMA_CHMAP1_CH9SEL 0x000000F0 /**< uDMA channel 9 source select */
|
||||
#define UDMA_CHMAP1_CH8SEL 0x0000000F /**< uDMA channel 8 source select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CHMAP2 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHMAP2_CH23SEL 0xF0000000 /**< uDMA channel 23 source select */
|
||||
#define UDMA_CHMAP2_CH22SEL 0x0F000000 /**< uDMA channel 22 source select */
|
||||
#define UDMA_CHMAP2_CH21SEL 0x00F00000 /**< uDMA channel 21 source select */
|
||||
#define UDMA_CHMAP2_CH20SEL 0x000F0000 /**< uDMA channel 20 source select */
|
||||
#define UDMA_CHMAP2_CH19SEL 0x0000F000 /**< uDMA channel 19 source select */
|
||||
#define UDMA_CHMAP2_CH18SEL 0x00000F00 /**< uDMA channel 18 source select */
|
||||
#define UDMA_CHMAP2_CH17SEL 0x000000F0 /**< uDMA channel 17 source select */
|
||||
#define UDMA_CHMAP2_CH16SEL 0x0000000F /**< uDMA channel 16 source select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name UDMA_CHMAP3 register bit masks
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHMAP3_CH31SEL 0xF0000000 /**< uDMA channel 31 source select */
|
||||
#define UDMA_CHMAP3_CH30SEL 0x0F000000 /**< uDMA channel 30 source select */
|
||||
#define UDMA_CHMAP3_CH29SEL 0x00F00000 /**< uDMA channel 29 source select */
|
||||
#define UDMA_CHMAP3_CH28SEL 0x000F0000 /**< uDMA channel 28 source select */
|
||||
#define UDMA_CHMAP3_CH27SEL 0x0000F000 /**< uDMA channel 27 source select */
|
||||
#define UDMA_CHMAP3_CH26SEL 0x00000F00 /**< uDMA channel 26 source select */
|
||||
#define UDMA_CHMAP3_CH25SEL 0x000000F0 /**< uDMA channel 25 source select */
|
||||
#define UDMA_CHMAP3_CH24SEL 0x0000000F /**< uDMA channel 24 source select */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name uDMA Channel encoding assignments
|
||||
* @{
|
||||
*/
|
||||
/* Channel 0 */
|
||||
#define UDMA_CH0_RESERVED0 0x00
|
||||
#define UDMA_CH0_RESERVED1 0x01
|
||||
#define UDMA_CH0_RESERVED2 0x02
|
||||
#define UDMA_CH0_RESERVED3 0x03
|
||||
#define UDMA_CH0_USB 0x04
|
||||
|
||||
/* Channel 1 */
|
||||
#define UDMA_CH1_RESERVED0 0x00
|
||||
#define UDMA_CH1_RESERVED1 0x01
|
||||
#define UDMA_CH1_RESERVED2 0x02
|
||||
#define UDMA_CH1_RESERVED3 0x03
|
||||
#define UDMA_CH1_ADC 0x04
|
||||
|
||||
/* Channel 2 */
|
||||
#define UDMA_CH2_RESERVED0 0x00
|
||||
#define UDMA_CH2_TIMER3A 0x01
|
||||
#define UDMA_CH2_RESERVED2 0x02
|
||||
#define UDMA_CH2_RESERVED3 0x03
|
||||
#define UDMA_CH2_FLASH 0x04
|
||||
|
||||
/* Channel 3 */
|
||||
#define UDMA_CH3_RESERVED0 0x00
|
||||
#define UDMA_CH3_TIMER3B 0x01
|
||||
#define UDMA_CH3_RESERVED2 0x02
|
||||
#define UDMA_CH3_RESERVED3 0x03
|
||||
#define UDMA_CH3_RFCORETRG1 0x04
|
||||
|
||||
/* Channel 4 */
|
||||
#define UDMA_CH4_RESERVED0 0x00
|
||||
#define UDMA_CH4_TIMER2A 0x01
|
||||
#define UDMA_CH4_RESERVED2 0x02
|
||||
#define UDMA_CH4_RESERVED3 0x03
|
||||
#define UDMA_CH4_RFCORETRG2 0x04
|
||||
|
||||
/* Channel 5 */
|
||||
#define UDMA_CH5_RESERVED0 0x00
|
||||
#define UDMA_CH5_TIMER2B 0x01
|
||||
#define UDMA_CH5_RESERVED2 0x02
|
||||
#define UDMA_CH5_RESERVED3 0x03
|
||||
#define UDMA_CH5_RESERVED4 0x04
|
||||
|
||||
/* Channel 6 */
|
||||
#define UDMA_CH6_RESERVED0 0x00
|
||||
#define UDMA_CH6_TIMER2A 0x01
|
||||
#define UDMA_CH6_RESERVED2 0x02
|
||||
#define UDMA_CH6_RESERVED3 0x03
|
||||
#define UDMA_CH6_RESERVED4 0x04
|
||||
|
||||
/* Channel 7 */
|
||||
#define UDMA_CH7_RESERVED0 0x00
|
||||
#define UDMA_CH7_TIMER2B 0x01
|
||||
#define UDMA_CH7_RESERVED2 0x02
|
||||
#define UDMA_CH7_RESERVED3 0x03
|
||||
#define UDMA_CH7_RESERVED4 0x04
|
||||
|
||||
/* Channel 8 */
|
||||
#define UDMA_CH8_UART0RX 0x00
|
||||
#define UDMA_CH8_UART1RX 0x01
|
||||
#define UDMA_CH8_RESERVED2 0x02
|
||||
#define UDMA_CH8_RESERVED3 0x03
|
||||
#define UDMA_CH8_RESERVED4 0x04
|
||||
|
||||
/* Channel 9 */
|
||||
#define UDMA_CH9_UART0TX 0x00
|
||||
#define UDMA_CH9_UART1TX 0x01
|
||||
#define UDMA_CH9_RESERVED2 0x02
|
||||
#define UDMA_CH9_RESERVED3 0x03
|
||||
#define UDMA_CH9_RESERVED4 0x04
|
||||
|
||||
/* Channel 10 */
|
||||
#define UDMA_CH10_SSI0RX 0x00
|
||||
#define UDMA_CH10_SSI1RX 0x01
|
||||
#define UDMA_CH10_RESERVED2 0x02
|
||||
#define UDMA_CH10_RESERVED3 0x03
|
||||
#define UDMA_CH10_RESERVED4 0x04
|
||||
|
||||
/* Channel 11 */
|
||||
#define UDMA_CH11_SSI0TX 0x00
|
||||
#define UDMA_CH11_SSI1TX 0x01
|
||||
#define UDMA_CH11_RESERVED2 0x02
|
||||
#define UDMA_CH11_RESERVED3 0x03
|
||||
#define UDMA_CH11_RESERVED4 0x04
|
||||
|
||||
/* Channel 12 */
|
||||
#define UDMA_CH12_RESERVED0 0x00
|
||||
#define UDMA_CH12_RESERVED1 0x01
|
||||
#define UDMA_CH12_RESERVED2 0x02
|
||||
#define UDMA_CH12_RESERVED3 0x03
|
||||
#define UDMA_CH12_RESERVED4 0x04
|
||||
|
||||
/* Channel 13 */
|
||||
#define UDMA_CH13_RESERVED0 0x00
|
||||
#define UDMA_CH13_RESERVED1 0x01
|
||||
#define UDMA_CH13_RESERVED2 0x02
|
||||
#define UDMA_CH13_RESERVED3 0x03
|
||||
#define UDMA_CH13_RESERVED4 0x04
|
||||
|
||||
/* Channel 14 */
|
||||
#define UDMA_CH14_ADC0 0x00
|
||||
#define UDMA_CH14_TIMER2A 0x01
|
||||
#define UDMA_CH14_RESERVED2 0x02
|
||||
#define UDMA_CH14_RESERVED3 0x03
|
||||
#define UDMA_CH14_RESERVED4 0x04
|
||||
|
||||
/* Channel 15 */
|
||||
#define UDMA_CH15_ADC1 0x00
|
||||
#define UDMA_CH15_TIMER2B 0x01
|
||||
#define UDMA_CH15_RESERVED2 0x02
|
||||
#define UDMA_CH15_RESERVED3 0x03
|
||||
#define UDMA_CH15_RESERVED4 0x04
|
||||
|
||||
/* Channel 16 */
|
||||
#define UDMA_CH16_ADC2 0x00
|
||||
#define UDMA_CH16_RESERVED1 0x01
|
||||
#define UDMA_CH16_RESERVED2 0x02
|
||||
#define UDMA_CH16_RESERVED3 0x03
|
||||
#define UDMA_CH16_RESERVED4 0x04
|
||||
|
||||
/* Channel 17 */
|
||||
#define UDMA_CH17_ADC3 0x00
|
||||
#define UDMA_CH17_RESERVED1 0x01
|
||||
#define UDMA_CH17_RESERVED2 0x02
|
||||
#define UDMA_CH17_RESERVED3 0x03
|
||||
#define UDMA_CH17_RESERVED4 0x04
|
||||
|
||||
/* Channel 18 */
|
||||
#define UDMA_CH18_TIMER0A 0x00
|
||||
#define UDMA_CH18_TIMER1A 0x01
|
||||
#define UDMA_CH18_RESERVED2 0x02
|
||||
#define UDMA_CH18_RESERVED3 0x03
|
||||
#define UDMA_CH18_RESERVED4 0x04
|
||||
|
||||
/* Channel 19 */
|
||||
#define UDMA_CH19_TIMER0B 0x00
|
||||
#define UDMA_CH19_TIMER1B 0x01
|
||||
#define UDMA_CH19_RESERVED2 0x02
|
||||
#define UDMA_CH19_RESERVED3 0x03
|
||||
#define UDMA_CH19_RESERVED4 0x04
|
||||
|
||||
/* Channel 20 */
|
||||
#define UDMA_CH20_TIMER1A 0x00
|
||||
#define UDMA_CH20_RESERVED1 0x01
|
||||
#define UDMA_CH20_RESERVED2 0x02
|
||||
#define UDMA_CH20_RESERVED3 0x03
|
||||
#define UDMA_CH20_RESERVED4 0x04
|
||||
|
||||
/* Channel 21 */
|
||||
#define UDMA_CH21_TIMER1B 0x00
|
||||
#define UDMA_CH21_RESERVED1 0x01
|
||||
#define UDMA_CH21_RESERVED2 0x02
|
||||
#define UDMA_CH21_RESERVED3 0x03
|
||||
#define UDMA_CH21_RESERVED4 0x04
|
||||
|
||||
/* Channel 22 */
|
||||
#define UDMA_CH22_UART1RX 0x00
|
||||
#define UDMA_CH22_RESERVED1 0x01
|
||||
#define UDMA_CH22_RESERVED2 0x02
|
||||
#define UDMA_CH22_RESERVED3 0x03
|
||||
#define UDMA_CH22_RESERVED4 0x04
|
||||
|
||||
/* Channel 23 */
|
||||
#define UDMA_CH23_UART1TX 0x00
|
||||
#define UDMA_CH23_RESERVED1 0x01
|
||||
#define UDMA_CH23_RESERVED2 0x02
|
||||
#define UDMA_CH23_RESERVED3 0x03
|
||||
#define UDMA_CH23_RESERVED4 0x04
|
||||
|
||||
/* Channel 24 */
|
||||
#define UDMA_CH24_SSI1RX 0x00
|
||||
#define UDMA_CH24_ADC4 0x01
|
||||
#define UDMA_CH24_RESERVED2 0x02
|
||||
#define UDMA_CH24_RESERVED3 0x03
|
||||
#define UDMA_CH24_RESERVED4 0x04
|
||||
|
||||
/* Channel 25 */
|
||||
#define UDMA_CH25_SSI1TX 0x00
|
||||
#define UDMA_CH25_ADC5 0x01
|
||||
#define UDMA_CH25_RESERVED2 0x02
|
||||
#define UDMA_CH25_RESERVED3 0x03
|
||||
#define UDMA_CH25_RESERVED4 0x04
|
||||
|
||||
/* Channel 26 */
|
||||
#define UDMA_CH26_RESERVED0 0x00
|
||||
#define UDMA_CH26_ADC6 0x01
|
||||
#define UDMA_CH26_RESERVED2 0x02
|
||||
#define UDMA_CH26_RESERVED3 0x03
|
||||
#define UDMA_CH26_RESERVED4 0x04
|
||||
|
||||
/* Channel 27 */
|
||||
#define UDMA_CH27_RESERVED0 0x00
|
||||
#define UDMA_CH27_ADC7 0x01
|
||||
#define UDMA_CH27_RESERVED2 0x02
|
||||
#define UDMA_CH27_RESERVED3 0x03
|
||||
#define UDMA_CH27_RESERVED4 0x04
|
||||
|
||||
/* Channel 28 */
|
||||
#define UDMA_CH28_RESERVED0 0x00
|
||||
#define UDMA_CH28_RESERVED1 0x01
|
||||
#define UDMA_CH28_RESERVED2 0x02
|
||||
#define UDMA_CH28_RESERVED3 0x03
|
||||
#define UDMA_CH28_RESERVED4 0x04
|
||||
|
||||
/* Channel 29 */
|
||||
#define UDMA_CH29_RESERVED0 0x00
|
||||
#define UDMA_CH29_RESERVED1 0x01
|
||||
#define UDMA_CH29_RESERVED2 0x02
|
||||
#define UDMA_CH29_RESERVED3 0x03
|
||||
#define UDMA_CH29_RFCORET2TRG1 0x04
|
||||
|
||||
/* Channel 30 */
|
||||
#define UDMA_CH30_SW 0x00
|
||||
#define UDMA_CH30_RESERVED1 0x01
|
||||
#define UDMA_CH30_RESERVED2 0x02
|
||||
#define UDMA_CH30_RESERVED3 0x03
|
||||
#define UDMA_CH30_RFCORET2TRG2 0x04
|
||||
|
||||
/* Channel 31 */
|
||||
#define UDMA_CH31_RESERVED0 0x00
|
||||
#define UDMA_CH31_RESERVED1 0x01
|
||||
#define UDMA_CH31_RESERVED2 0x02
|
||||
#define UDMA_CH31_RESERVED3 0x03
|
||||
#define UDMA_CH31_RESERVED4 0x04
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Values to ORd together as the ctrl argument of
|
||||
* udma_set_channel_control_word()
|
||||
* @{
|
||||
*/
|
||||
#define UDMA_CHCTL_DSTINC_NONE 0xC0000000 /**< Dst address no increment */
|
||||
#define UDMA_CHCTL_DSTINC_32 0x80000000 /**< Dst address increment 32 bit */
|
||||
#define UDMA_CHCTL_DSTINC_16 0x40000000 /**< Dst address increment 16 bit */
|
||||
#define UDMA_CHCTL_DSTINC_8 0x00000000 /**< Dst address increment 8 bit */
|
||||
|
||||
#define UDMA_CHCTL_DSTSIZE_32 0x20000000 /**< Destination size 32 bit */
|
||||
#define UDMA_CHCTL_DSTSIZE_16 0x10000000 /**< Destination size 16 bit */
|
||||
#define UDMA_CHCTL_DSTSIZE_8 0x00000000 /**< Destination size 8 bit */
|
||||
|
||||
#define UDMA_CHCTL_SRCINC_NONE 0x0C000000 /**< Source address no increment */
|
||||
#define UDMA_CHCTL_SRCINC_32 0x08000000 /**< Source address increment 32 bit */
|
||||
#define UDMA_CHCTL_SRCINC_16 0x04000000 /**< Source address increment 16 bit */
|
||||
#define UDMA_CHCTL_SRCINC_8 0x00000000 /**< Source address increment 8 bit */
|
||||
|
||||
#define UDMA_CHCTL_SRCSIZE_32 0x02000000 /**< Source size 32 bit */
|
||||
#define UDMA_CHCTL_SRCSIZE_16 0x01000000 /**< Source size 16 bit */
|
||||
#define UDMA_CHCTL_SRCSIZE_8 0x00000000 /**< Source size 8 bit */
|
||||
|
||||
#define UDMA_CHCTL_ARBSIZE_1 0x00000000 /**< Arbitration size 1 Transfer */
|
||||
#define UDMA_CHCTL_ARBSIZE_2 0x00004000 /**< Arbitration size 2 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_4 0x00008000 /**< Arbitration size 4 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 /**< Arbitration size 8 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_16 0x00010000 /**< Arbitration size 16 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_32 0x00014000 /**< Arbitration size 32 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_64 0x00018000 /**< Arbitration size 64 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 /**< Arbitration size 128 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_256 0x00020000 /**< Arbitration size 256 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_512 0x00024000 /**< Arbitration size 512 Transfers */
|
||||
#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 /**< Arbitration size 1024 Transfers */
|
||||
|
||||
#define UDMA_CHCTL_XFERMODE_STOP 0x00000000 /**< Stop */
|
||||
#define UDMA_CHCTL_XFERMODE_BASIC 0x00000001 /**< Basic */
|
||||
#define UDMA_CHCTL_XFERMODE_AUTO 0x00000002 /**< Auto-Request */
|
||||
#define UDMA_CHCTL_XFERMODE_PINGPONG 0x00000003 /**< Ping-Pong */
|
||||
#define UDMA_CHCTL_XFERMODE_MEM_SG 0x00000004 /**< Memory Scatter-Gather */
|
||||
#define UDMA_CHCTL_XFERMODE_MEM_SGA 0x00000005 /**< Memory Scatter-Gather Alt */
|
||||
#define UDMA_CHCTL_XFERMODE_PER_SG 0x00000006 /**< Peripheral Scatter-Gather */
|
||||
#define UDMA_CHCTL_XFERMODE_PER_SGA 0x00000007 /**< Peripheral Scatter-Gather Alt */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* \brief Initialise the uDMA driver
|
||||
*
|
||||
* Prepares the channel control structure and enables the controller
|
||||
*/
|
||||
void udma_init(void);
|
||||
|
||||
/**
|
||||
* \brief Sets the channels source address
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
* \param
|
||||
*/
|
||||
void udma_set_channel_src(uint8_t channel, uint32_t src_end);
|
||||
|
||||
/**
|
||||
* \brief
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_set_channel_dst(uint8_t channel, uint32_t dst_end);
|
||||
|
||||
/**
|
||||
* \brief Configure the channel's control word
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
* \param ctrl The value of the control word
|
||||
*
|
||||
* The value of the control word is generated by ORing the values defined as
|
||||
* UDMA_CHCTL_xyz
|
||||
*
|
||||
* For example, to configure a channel with 8 bit source and destination size,
|
||||
* 0 source increment and 8 bit destination increment, one would need to pass
|
||||
* UDMA_CHCTL_DSTINC_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_SRCSIZE_8 |
|
||||
* UDMA_CHCTL_DSTSIZE_8
|
||||
*
|
||||
* Macros defined as 0 can be omitted.
|
||||
*/
|
||||
void udma_set_channel_control_word(uint8_t channel, uint32_t ctrl);
|
||||
|
||||
/**
|
||||
* \brief Choose an encoding for a uDMA channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
* \param enc A value in [0 , 4]
|
||||
*
|
||||
* Possible values for the \e encoding param are defined as UDMA_CHnn_xyz
|
||||
*/
|
||||
void udma_set_channel_assignment(uint8_t channel, uint8_t enc);
|
||||
|
||||
/**
|
||||
* \brief Enables a uDMA channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_enable(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Disables a uDMA channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_disable(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Use the alternate control data structure for a channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*
|
||||
* \note Currently, the driver only reserves memory space for primary contrl
|
||||
* data structures
|
||||
*/
|
||||
void udma_channel_use_alternate(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Use the primary control data structure for a channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_use_primary(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Set a uDMA channel to high priority
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_prio_set_high(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Set a uDMA channel to default priority
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_prio_set_default(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Configure a channel to only use burst transfers
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*
|
||||
* \note The uDMA controller may under certain conditions automatically disable
|
||||
* burst mode, in which case this function will need to be called again to
|
||||
* re-enable them
|
||||
*/
|
||||
void udma_channel_use_burst(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Configure a channel to use single as well as burst requests
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_use_single(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Disable peripheral triggers for a uDMA channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*
|
||||
* Calling this function will result in the uDMA controller not acknowledging
|
||||
* peripheral-generated transfer triggers. Afterwards, the channel may be used
|
||||
* with software triggers
|
||||
*/
|
||||
void udma_channel_mask_set(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Enable peripheral triggers for a uDMA channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_mask_clr(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Generate a software trigger to start a transfer
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
*/
|
||||
void udma_channel_sw_request(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Retrieve the current mode for a channel
|
||||
* \param channel The channel as a value in [0 , UDMA_CONF_MAX_CHANNEL]
|
||||
* \return The channel's current mode
|
||||
*
|
||||
* The return value will be one of the UDMA_CHCTL_XFERMODE_xyz defines. This
|
||||
* function is useful to determine whether a uDMA transfer has completed, in
|
||||
* which case the return value will be UDMA_CHCTL_XFERMODE_STOP
|
||||
*/
|
||||
uint8_t udma_channel_get_mode(uint8_t channel);
|
||||
|
||||
/**
|
||||
* \brief Calculate the value of the xfersize field in the control structure
|
||||
* \param len The number of items to be transferred
|
||||
* \return The value to be written to the control structure to achieve the
|
||||
* desired transfer size
|
||||
*
|
||||
* If we want to transfer \e len items, we will normally do something like
|
||||
* udma_set_channel_control_word(OTHER_FLAGS | udma_xfer_size(len))
|
||||
*/
|
||||
#define udma_xfer_size(len) ((len - 1) << 4)
|
||||
|
||||
#endif /* UDMA_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
355
cpu/cc2538/dev/usb-regs.h
Normal file
355
cpu/cc2538/dev/usb-regs.h
Normal file
|
|
@ -0,0 +1,355 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/** \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-usb cc2538 USB controller
|
||||
*
|
||||
* Driver for the cc2538 USB controller.
|
||||
*
|
||||
* We use the USB core in cpu/cc253x/usb which is known to work on Linux as
|
||||
* well as on OS X.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with declarations for the cc2538 USB registers
|
||||
*/
|
||||
#ifndef USB_REGS_H_
|
||||
#define USB_REGS_H_
|
||||
|
||||
#include "contiki-conf.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB Register Offsets
|
||||
* @{
|
||||
*/
|
||||
#define USB_ADDR 0x40089000 /**< Function address */
|
||||
#define USB_POW 0x40089004 /**< Power/Control register */
|
||||
#define USB_IIF 0x40089008 /**< IN EPs and EP0 interrupt flags */
|
||||
#define USB_OIF 0x40089010 /**< OUT endpoint interrupt flags */
|
||||
#define USB_CIF 0x40089018 /**< Common USB interrupt flags */
|
||||
#define USB_IIE 0x4008901C /**< IN EPs and EP0 interrupt mask */
|
||||
#define USB_OIE 0x40089024 /**< Out EPs interrupt-enable mask */
|
||||
#define USB_CIE 0x4008902C /**< Common USB interrupt mask */
|
||||
#define USB_FRML 0x40089030 /**< Current frame number (low byte) */
|
||||
#define USB_FRMH 0x40089034 /**< Current frame number (high) */
|
||||
#define USB_INDEX 0x40089038 /**< Current endpoint index register */
|
||||
#define USB_CTRL 0x4008903C /**< USB control register */
|
||||
#define USB_MAXI 0x40089040 /**< MAX packet size for IN EPs{1-5} */
|
||||
#define USB_CS0_CSIL 0x40089044 /**< EP0 Control and Status or IN EPs
|
||||
control and status (low) */
|
||||
#define USB_CS0 0x40089044 /**< EP0 Control and Status
|
||||
(Alias for USB_CS0_CSIL) */
|
||||
#define USB_CSIL 0x40089044 /**< IN EPs control and status (low)
|
||||
(Alias for USB_CS0_CSIL) */
|
||||
#define USB_CSIH 0x40089048 /**< IN EPs control and status (high) */
|
||||
#define USB_MAXO 0x4008904C /**< MAX packet size for OUT EPs */
|
||||
#define USB_CSOL 0x40089050 /**< OUT EPs control and status (low) */
|
||||
#define USB_CSOH 0x40089054 /**< OUT EPs control and status (high) */
|
||||
#define USB_CNT0_CNTL 0x40089058 /**< Number of RX bytes in EP0 FIFO
|
||||
or number of bytes in EP{1-5}
|
||||
OUT FIFO (low) */
|
||||
#define USB_CNT0 0x40089058 /**< Number of RX bytes in EP0 FIFO
|
||||
(Alias for USB_CNT0_CNTL) */
|
||||
#define USB_CNTL 0x40089058 /**< Number of bytes in EP{1-5}
|
||||
OUT FIFO (low)
|
||||
(Alias for USB_CNT0_CNTL) */
|
||||
#define USB_CNTH 0x4008905C /**< Number of bytes in EP{1-5}
|
||||
OUT FIFO (high) */
|
||||
#define USB_F0 0x40089080 /**< Endpoint-0 FIFO */
|
||||
#define USB_F1 0x40089088 /**< Endpoint-1 FIFO */
|
||||
#define USB_F2 0x40089090 /**< Endpoint-2 FIFO */
|
||||
#define USB_F3 0x40089098 /**< Endpoint-3 FIFO */
|
||||
#define USB_F4 0x400890A0 /**< Endpoint-4 FIFO */
|
||||
#define USB_F5 0x400890A8 /**< Endpoint-5 FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_ADDR Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_ADDR_UPDATE 0x00000080 /**< 1 while address updating */
|
||||
#define USB_ADDR_USBADDR 0x0000007F /**< Device address */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_POW Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_POW_ISO_WAIT_SOF 0x00000080 /**< 1 until SOF received - ISO only */
|
||||
#define USB_POW_RST 0x00000008 /**< 1 During reset signaling */
|
||||
#define USB_POW_RESUME 0x00000004 /**< Remote wakeup resume signalling */
|
||||
#define USB_POW_SUSPEND 0x00000002 /**< Suspend mode entered */
|
||||
#define USB_POW_SUSPEND_EN 0x00000001 /**< Suspend enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_IIF Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_IIF_INEP5IF 0x00000020 /**< IN EP5 Interrupt flag */
|
||||
#define USB_IIF_INEP4IF 0x00000010 /**< IN EP4 Interrupt flag */
|
||||
#define USB_IIF_INEP3IF 0x00000008 /**< IN EP3 Interrupt flag */
|
||||
#define USB_IIF_INEP2IF 0x00000004 /**< IN EP2 Interrupt flag */
|
||||
#define USB_IIF_INEP1IF 0x00000002 /**< IN EP1 Interrupt flag */
|
||||
#define USB_IIF_EP0IF 0x00000001 /**< EP0 Interrupt flag */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_OIF Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_OIF_OUTEP5IF 0x00000020 /**< OUT EP5 Interrupt flag */
|
||||
#define USB_OIF_OUTEP4IF 0x00000010 /**< OUT EP4 Interrupt flag */
|
||||
#define USB_OIF_OUTEP3IF 0x00000008 /**< OUT EP3 Interrupt flag */
|
||||
#define USB_OIF_OUTEP2IF 0x00000004 /**< OUT EP2 Interrupt flag */
|
||||
#define USB_OIF_OUTEP1IF 0x00000002 /**< OUT EP1 Interrupt flag */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CIF Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CIF_SOFIF 0x00000008 /**< Start-of-frame interrupt flag */
|
||||
#define USB_CIF_RSTIF 0x00000004 /**< Reset interrupt flag */
|
||||
#define USB_CIF_RESUMEIF 0x00000002 /**< Resume interrupt flag */
|
||||
#define USB_CIF_SUSPENDIF 0x00000001 /**< Suspend interrupt flag */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_IIE Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_IIE_INEP5IE 0x00000020 /**< IN EP5 interrupt enable */
|
||||
#define USB_IIE_INEP4IE 0x00000010 /**< IN EP4 interrupt enable */
|
||||
#define USB_IIE_INEP3IE 0x00000008 /**< IN EP3 interrupt enable */
|
||||
#define USB_IIE_INEP2IE 0x00000004 /**< IN EP2 interrupt enable */
|
||||
#define USB_IIE_INEP1IE 0x00000002 /**< IN EP1 interrupt enable */
|
||||
#define USB_IIE_EP0IE 0x00000001 /**< EP0 interrupt enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_OIE Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_OIE_OUTEP5IE 0x00000020 /**< OUT EP5 interrupt enable */
|
||||
#define USB_OIE_OUTEP4IE 0x00000010 /**< OUT EP4 interrupt enable */
|
||||
#define USB_OIE_OUTEP3IE 0x00000008 /**< OUT EP3 interrupt enable */
|
||||
#define USB_OIE_OUTEP2IE 0x00000004 /**< OUT EP2 interrupt enable */
|
||||
#define USB_OIE_OUTEP1IE 0x00000002 /**< OUT EP1 interrupt enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CIE Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CIE_SOFIE 0x00000008 /**< Start-of-frame interrupt enable */
|
||||
#define USB_CIE_RSTIE 0x00000004 /**< Reset interrupt enable */
|
||||
#define USB_CIE_RESUMEIE 0x00000002 /**< Resume interrupt enable */
|
||||
#define USB_CIE_SUSPENDIE 0x00000001 /**< Suspend interrupt enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_FRML Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_FRML_FRAME 0x000000FF /**< Low byte of 11-bit frame number */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_FRMH Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_FRMH_FRAME 0x00000007 /**< 3 MSBs of 11-bit frame number */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_INDEX Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_INDEX_USBINDEX 0x0000000F /**< Endpoint selected */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CTRL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CTRL_PLL_LOCKED 0x00000080 /**< PLL locked status */
|
||||
#define USB_CTRL_PLL_EN 0x00000002 /**< 48-MHz USB PLL enable */
|
||||
#define USB_CTRL_USB_EN 0x00000001 /**< USB enable */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_MAXI Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_MAXI_USBMAXI 0x000000FF /**< Maximum packet size */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CS0_CSIL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
/** Listed as reserved in the UG, is this right? */
|
||||
#define USB_CS0_CLR_SETUP_END 0x00000080
|
||||
|
||||
/** Deassert OUTPKT_RDY bit of this register or reset the data toggle to 0 */
|
||||
#define USB_CS0_CSIL_CLR_OUTPKT_RDY_or_CLR_DATA_TOG 0x00000040
|
||||
#define USB_CS0_CLR_OUTPKT_RDY 0x00000040
|
||||
#define USB_CSIL_CLR_DATA_TOG 0x00000040
|
||||
|
||||
/**
|
||||
* Set this bit to 1 to terminate the current transaction or
|
||||
* is set when a STALL handshake has been sent
|
||||
*/
|
||||
#define USB_CS0_CSIL_SEND_STALL_or_SENT_STALL 0x00000020
|
||||
#define USB_CS0_SEND_STALL 0x00000020
|
||||
#define USB_CSIL_SENT_STALL 0x00000020
|
||||
|
||||
/**
|
||||
* Is set if the control transfer ends due to a premature end-of-control
|
||||
* transfer or set to 1 to make the USB controller reply with a STALL handshake
|
||||
* when receiving IN tokens
|
||||
*/
|
||||
#define USB_CS0_CSIL_SETUP_END_or_SEND_STALL 0x00000010
|
||||
#define USB_CS0_SETUP_END 0x00000010
|
||||
#define USB_CSIL_SEND_STALL 0x00000010
|
||||
|
||||
/**
|
||||
* Signal the end of a data transfer or set to 1 to flush next packet that
|
||||
* is ready to transfer from the IN FIFO
|
||||
*/
|
||||
#define USB_CS0_CSIL_DATA_END_or_FLUSH_PACKET 0x00000008
|
||||
#define USB_CS0_DATA_END 0x00000008
|
||||
#define USB_CSIL_FLUSH_PACKET 0x00000008
|
||||
|
||||
/**
|
||||
* Set when a STALL handshake is sent or set if an IN token is received when
|
||||
* INPKT_RDY = 0, and a zero-length data packet is transmitted in response to
|
||||
* the IN token. In bulk/interrupt mode, this bit is set when a NAK is returned
|
||||
* in response to an IN token
|
||||
*/
|
||||
#define USB_CS0_CSIL_SENT_STALL_or_UNDERRUN 0x00000004
|
||||
#define USB_CS0_SENT_STALL 0x00000004
|
||||
#define USB_CSIL_UNDERRUN 0x00000004
|
||||
|
||||
/**
|
||||
* Data packet has been loaded into the EP0 FIFO or at least one packet in the
|
||||
* IN FIFO
|
||||
*/
|
||||
#define USB_CS0_CSIL_INPKT_RDY_or_PKT_PRESENT 0x00000002
|
||||
#define USB_CS0_INPKT_RDY 0x00000002
|
||||
#define USB_CSIL_PKT_PRESENT 0x00000002
|
||||
|
||||
/** Data packet received or data packet has been loaded into the IN FIFO */
|
||||
#define USB_CS0_CSIL_OUTPKT_RDY_or_INPKT_RDY 0x00000001
|
||||
#define USB_CS0_OUTPKT_RDY 0x00000001
|
||||
#define USB_CSIL_INPKT_RDY 0x00000001
|
||||
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CSIH Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CSIH_AUTISET 0x00000080 /**< Auto-assert INPKT_RDY */
|
||||
#define USB_CSIH_ISO 0x00000040 /**< Selects IN endpoint type */
|
||||
#define USB_CSIH_FORCE_DATA_TOG 0x00000008 /**< IN EP force data toggle switch */
|
||||
#define USB_CSIH_IN_DBL_BUF 0x00000001 /**< Double buffering enable (IN FIFO) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_MAXO Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_MAXO_USBMAXO 0x000000FF /**< Maximum packet size */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CSOL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CSOL_CLR_DATA_TOG 0x00000080 /**< Setting resets data toggle to 0 */
|
||||
#define USB_CSOL_SENT_STALL 0x00000040 /**< STALL handshake sent */
|
||||
#define USB_CSOL_SEND_STALL 0x00000020 /**< Reply with STALL to OUT tokens */
|
||||
#define USB_CSOL_FLUSH_PACKET 0x00000010 /**< Flush next packet read from OUT FIFO */
|
||||
#define USB_CSOL_DATA_ERROR 0x00000008 /**< CRC or bit-stuff error in RX packet */
|
||||
#define USB_CSOL_OVERRUN 0x00000004 /**< OUT packet can not be loaded into OUT FIFO */
|
||||
#define USB_CSOL_FIFO_FULL 0x00000002 /**< OUT FIFO full */
|
||||
#define USB_CSOL_OUTPKT_RDY 0x00000001 /**< OUT packet read in OUT FIFO */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CSOH Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CSOH_AUTOCLEAR 0x00000080 /**< Auto-clear OUTPKT_RDY */
|
||||
#define USB_CSOH_ISO 0x00000040 /**< Selects OUT endpoint type */
|
||||
#define USB_CSOH_OUT_DBL_BUF 0x00000001 /**< Double buffering enable (OUT FIFO) */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CNT0_CNTL Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CNT0_CNTL_USBCNT0 0x0000003F /**< Number of RX bytes in EP0 FIFO */
|
||||
#define USB_CNT0_USBCNT0 0x0000003F
|
||||
|
||||
#define USB_CNT0_CNTL_USBCNT_5_0 0x0000003F /**< 6 LSBs of the number of RX
|
||||
bytes in EP1-5 OUT FIFO */
|
||||
#define USB_CNTL_USBCNT_5_0 0x0000003F
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_CNTH Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_CNTH_USBCNT 0x00000007 /**< 3 MSBs of RX byte number */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB_F[0-5] Register Bit-Masks
|
||||
* @{
|
||||
*/
|
||||
#define USB_F0_USBF0 0x000000FF /**< Endpoint 0 FIFO mask */
|
||||
#define USB_F1_USBF1 0x000000FF /**< Endpoint 1 FIFO mask */
|
||||
#define USB_F2_USBF2 0x000000FF /**< Endpoint 2 FIFO mask */
|
||||
#define USB_F3_USBF3 0x000000FF /**< Endpoint 3 FIFO mask */
|
||||
#define USB_F4_USBF4 0x000000FF /**< Endpoint 4 FIFO mask */
|
||||
#define USB_F5_USBF5 0x000000FF /**< Endpoint 5 FIFO mask */
|
||||
/** @} */
|
||||
|
||||
#endif /* USB_REGS_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
95
cpu/cc2538/dev/watchdog.c
Normal file
95
cpu/cc2538/dev/watchdog.c
Normal file
|
|
@ -0,0 +1,95 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-wdt cc2538 watchdog timer driver
|
||||
*
|
||||
* Driver for the cc2538 Watchdog Timer
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the cc2538 watchdog driver. The peripheral runs in
|
||||
* watchdog mode.
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "reg.h"
|
||||
#include "cpu.h"
|
||||
#include "dev/smwdthrosc.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Initialisation function for the WDT. Currently simply explicitly
|
||||
* sets the WDT interval to max interval */
|
||||
void
|
||||
watchdog_init(void)
|
||||
{
|
||||
/* Max interval, don't enable yet */
|
||||
REG(SMWDTHROSC_WDCTL) = 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Starts the WDT in watchdog mode, maximum interval */
|
||||
void
|
||||
watchdog_start(void)
|
||||
{
|
||||
/* Max interval (32768), watchdog mode, Enable */
|
||||
REG(SMWDTHROSC_WDCTL) = SMWDTHROSC_WDCTL_EN;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Writes the WDT clear sequence. This function assumes that we are
|
||||
* in watchdog mode and that interval bits (bits [1:0]) are 00 */
|
||||
void
|
||||
watchdog_periodic(void)
|
||||
{
|
||||
/* Safe to write to bits [3:0] since EN is 1 */
|
||||
REG(SMWDTHROSC_WDCTL) = (SMWDTHROSC_WDCTL_CLR_3 | SMWDTHROSC_WDCTL_CLR_1);
|
||||
REG(SMWDTHROSC_WDCTL) = (SMWDTHROSC_WDCTL_CLR_2 | SMWDTHROSC_WDCTL_CLR_0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief In watchdog mode, the WDT can not be stopped. This function is
|
||||
* defined here to satisfy API requirements.
|
||||
*/
|
||||
void
|
||||
watchdog_stop(void)
|
||||
{
|
||||
return;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \brief Keeps control until the WDT throws a reset signal */
|
||||
void
|
||||
watchdog_reboot(void)
|
||||
{
|
||||
INTERRUPTS_DISABLE();
|
||||
while(1);
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
65
cpu/cc2538/ieee-addr.c
Normal file
65
cpu/cc2538/ieee-addr.c
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-ieee-addr
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the cc2538 IEEE addresses
|
||||
*/
|
||||
#include "contiki-conf.h"
|
||||
#include "net/rime/rimeaddr.h"
|
||||
#include "ieee-addr.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
ieee_addr_cpy_to(uint8_t *dst, uint8_t len)
|
||||
{
|
||||
if(IEEE_ADDR_CONF_HARDCODED) {
|
||||
uint8_t ieee_addr_hc[8] = IEEE_ADDR_CONF_ADDRESS;
|
||||
|
||||
memcpy(dst, &ieee_addr_hc[8 - len], len);
|
||||
} else {
|
||||
/* Reading from Info Page, we need to invert byte order */
|
||||
int i;
|
||||
for(i = 0; i < len; i++) {
|
||||
dst[i] = ((uint8_t *)IEEE_ADDR_LOCATION_PRIMARY)[len - 1 - i];
|
||||
}
|
||||
}
|
||||
|
||||
#if IEEE_ADDR_NODE_ID
|
||||
dst[len - 1] = IEEE_ADDR_NODE_ID & 0xFF;
|
||||
dst[len - 2] = IEEE_ADDR_NODE_ID >> 8;
|
||||
#endif
|
||||
}
|
||||
|
||||
/** @} */
|
||||
80
cpu/cc2538/ieee-addr.h
Normal file
80
cpu/cc2538/ieee-addr.h
Normal file
|
|
@ -0,0 +1,80 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-ieee-addr cc2538 IEEE Address Control
|
||||
*
|
||||
* Driver for the retrieval of an IEEE address from flash
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register and macro declarations for the cc2538 IEEE address
|
||||
* driver
|
||||
*/
|
||||
#ifndef IEEE_ADDR_H_
|
||||
#define IEEE_ADDR_H_
|
||||
|
||||
#include "contiki-conf.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name IEEE address locations
|
||||
* @{
|
||||
*/
|
||||
#define IEEE_ADDR_LOCATION_PRIMARY 0x00280020 /**< IEEE address location */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* \brief Copy the node's IEEE address to a destination memory area
|
||||
* \param dst A pointer to the destination area where the IEEE address is to be
|
||||
* written
|
||||
* \param len The number of bytes to write to destination area
|
||||
*
|
||||
* The address will be read from an InfoPage location or a hard-coded address
|
||||
* will be used, depending on the value of configuration parameter
|
||||
* IEEE_ADDR_CONF_HARDCODED
|
||||
*
|
||||
* This function will copy \e len LS bytes
|
||||
*
|
||||
* The destination address will be populated with dst[0] holding the MSB and
|
||||
* dst[len - 1] holding the LSB
|
||||
*/
|
||||
void ieee_addr_cpy_to(uint8_t *dst, uint8_t len);
|
||||
|
||||
#endif /* IEEE_ADDR_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
316
cpu/cc2538/lpm.c
Normal file
316
cpu/cc2538/lpm.c
Normal file
|
|
@ -0,0 +1,316 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-lpm
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of low power modes ofr the cc2538
|
||||
*/
|
||||
#include "contiki-conf.h"
|
||||
#include "sys/energest.h"
|
||||
#include "sys/process.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "dev/scb.h"
|
||||
#include "dev/rfcore-xreg.h"
|
||||
#include "dev/usb-regs.h"
|
||||
#include "rtimer-arch.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#if ENERGEST_CONF_ON
|
||||
static unsigned long irq_energest = 0;
|
||||
|
||||
#define ENERGEST_IRQ_SAVE(a) do { \
|
||||
a = energest_type_time(ENERGEST_TYPE_IRQ); } while(0)
|
||||
#define ENERGEST_IRQ_RESTORE(a) do { \
|
||||
energest_type_set(ENERGEST_TYPE_IRQ, a); } while(0)
|
||||
#else
|
||||
#define ENERGEST_IRQ_SAVE(a) do {} while(0)
|
||||
#define ENERGEST_IRQ_RESTORE(a) do {} while(0)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Deep Sleep thresholds in rtimer ticks (~30.5 usec)
|
||||
*
|
||||
* If Deep Sleep duration < DEEP_SLEEP_PM1_THRESHOLD, simply enter PM0
|
||||
* If duration < DEEP_SLEEP_PM2_THRESHOLD drop to PM1
|
||||
* else PM2.
|
||||
*/
|
||||
#define DEEP_SLEEP_PM1_THRESHOLD 10
|
||||
#define DEEP_SLEEP_PM2_THRESHOLD 100
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define assert_wfi() do { asm("wfi"::); } while(0)
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#if LPM_CONF_STATS
|
||||
rtimer_clock_t lpm_stats[3];
|
||||
|
||||
#define LPM_STATS_INIT() do { memset(lpm_stats, 0, sizeof(lpm_stats)); \
|
||||
} while(0)
|
||||
#define LPM_STATS_ADD(pm, val) do { lpm_stats[pm] += val; } while(0)
|
||||
#else
|
||||
#define LPM_STATS_INIT()
|
||||
#define LPM_STATS_ADD(stat, val)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Remembers what time it was when went to deep sleep
|
||||
* This is used when coming out of PM1/2 to adjust the system clock, which
|
||||
* stops ticking while in those PMs
|
||||
*/
|
||||
static rtimer_clock_t sleep_enter_time;
|
||||
|
||||
#define RTIMER_CLOCK_TICK_RATIO (RTIMER_SECOND / CLOCK_SECOND)
|
||||
|
||||
void clock_adjust(clock_time_t ticks);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Stores the currently specified MAX allowed PM */
|
||||
static uint8_t max_pm;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Routine to put is in PM0. We also need to do some housekeeping if the stats
|
||||
* or the energest module is enabled
|
||||
*/
|
||||
static void
|
||||
enter_pm0(void)
|
||||
{
|
||||
ENERGEST_OFF(ENERGEST_TYPE_CPU);
|
||||
ENERGEST_ON(ENERGEST_TYPE_LPM);
|
||||
|
||||
/* We are only interested in IRQ energest while idle or in LPM */
|
||||
ENERGEST_IRQ_RESTORE(irq_energest);
|
||||
|
||||
/*
|
||||
* After PM0 we don't need to adjust the system clock. Thus, saving the time
|
||||
* we enter Deep Sleep is only required if we are keeping stats.
|
||||
*/
|
||||
if(LPM_CONF_STATS) {
|
||||
sleep_enter_time = RTIMER_NOW();
|
||||
}
|
||||
|
||||
assert_wfi();
|
||||
|
||||
/* We reach here when the interrupt context that woke us up has returned */
|
||||
LPM_STATS_ADD(0, RTIMER_NOW() - sleep_enter_time);
|
||||
|
||||
/* Remember IRQ energest for next pass */
|
||||
ENERGEST_IRQ_SAVE(irq_energest);
|
||||
|
||||
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LPM);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
select_32_mhz_xosc(void)
|
||||
{
|
||||
/* Turn on the 32 MHz XOSC and source the system clock on it. */
|
||||
REG(SYS_CTRL_CLOCK_CTRL) &= ~SYS_CTRL_CLOCK_CTRL_OSC;
|
||||
|
||||
/* Wait for the switch to take place */
|
||||
while((REG(SYS_CTRL_CLOCK_STA) & SYS_CTRL_CLOCK_STA_OSC) != 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
select_16_mhz_rcosc(void)
|
||||
{
|
||||
/*First, make sure there is no ongoing clock source change */
|
||||
while((REG(SYS_CTRL_CLOCK_STA) & SYS_CTRL_CLOCK_STA_SOURCE_CHANGE) != 0);
|
||||
|
||||
/* Set the System Clock to use the 16MHz RC OSC */
|
||||
REG(SYS_CTRL_CLOCK_CTRL) |= SYS_CTRL_CLOCK_CTRL_OSC;
|
||||
|
||||
/* Wait till it's happened */
|
||||
while((REG(SYS_CTRL_CLOCK_STA) & SYS_CTRL_CLOCK_STA_OSC) == 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
lpm_exit()
|
||||
{
|
||||
if((REG(SYS_CTRL_PMCTL) & SYS_CTRL_PMCTL_PM3) == SYS_CTRL_PMCTL_PM0) {
|
||||
/* We either just exited PM0 or we were not sleeping in the first place.
|
||||
* We don't need to do anything clever */
|
||||
return;
|
||||
}
|
||||
|
||||
LPM_STATS_ADD(REG(SYS_CTRL_PMCTL) & SYS_CTRL_PMCTL_PM3,
|
||||
RTIMER_NOW() - sleep_enter_time);
|
||||
|
||||
/* Adjust the system clock, since it was not counting while we were sleeping
|
||||
* We need to convert sleep duration from rtimer ticks to clock ticks and
|
||||
* this will cost us some accuracy */
|
||||
clock_adjust((clock_time_t)
|
||||
((RTIMER_NOW() - sleep_enter_time) / RTIMER_CLOCK_TICK_RATIO));
|
||||
|
||||
/* Restore system clock to the 32 MHz XOSC */
|
||||
select_32_mhz_xosc();
|
||||
|
||||
/* Restore PMCTL to PM0 for next pass */
|
||||
REG(SYS_CTRL_PMCTL) = SYS_CTRL_PMCTL_PM0;
|
||||
|
||||
/* Remember IRQ energest for next pass */
|
||||
ENERGEST_IRQ_SAVE(irq_energest);
|
||||
|
||||
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LPM);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
lpm_enter()
|
||||
{
|
||||
rtimer_clock_t lpm_exit_time;
|
||||
rtimer_clock_t duration;
|
||||
|
||||
/*
|
||||
* If either the RF or the USB is on, dropping to PM1/2 would equal pulling
|
||||
* the rug (32MHz XOSC) from under their feet. Thus, we only drop to PM0.
|
||||
* PM0 is also used if max_pm==0
|
||||
*
|
||||
* Note: USB Suspend/Resume/Remote Wake-Up are not supported. Once the PLL is
|
||||
* on, it stays on.
|
||||
*/
|
||||
if((REG(RFCORE_XREG_FSMSTAT0) & RFCORE_XREG_FSMSTAT0_FSM_FFCTRL_STATE) != 0
|
||||
|| REG(USB_CTRL) != 0 || max_pm == 0) {
|
||||
enter_pm0();
|
||||
|
||||
/* We reach here when the interrupt context that woke us up has returned */
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* USB PLL was off. Radio was off: Some Duty Cycling in place.
|
||||
* rtimers run on the Sleep Timer. Thus, if we have a scheduled rtimer
|
||||
* task, a Sleep Timer interrupt will fire and will wake us up.
|
||||
* Choose the most suitable PM based on anticipated deep sleep duration
|
||||
*/
|
||||
lpm_exit_time = rtimer_arch_next_trigger();
|
||||
duration = lpm_exit_time - RTIMER_NOW();
|
||||
|
||||
if(duration < DEEP_SLEEP_PM1_THRESHOLD || lpm_exit_time == 0) {
|
||||
/* Anticipated duration too short or no scheduled rtimer task. Use PM0 */
|
||||
enter_pm0();
|
||||
|
||||
/* We reach here when the interrupt context that woke us up has returned */
|
||||
return;
|
||||
}
|
||||
|
||||
/* If we reach here, we -may- (but may as well not) be dropping to PM1+. We
|
||||
* know the USB and RF are off so we can switch to the 16MHz RCOSC. */
|
||||
select_16_mhz_rcosc();
|
||||
|
||||
/*
|
||||
* Switching the System Clock from the 32MHz XOSC to the 16MHz RC OSC may
|
||||
* have taken a while. Re-estimate sleep duration.
|
||||
*/
|
||||
duration = lpm_exit_time - RTIMER_NOW();
|
||||
|
||||
if(duration < DEEP_SLEEP_PM1_THRESHOLD) {
|
||||
/*
|
||||
* oops... The clock switch took some time and now the remaining sleep
|
||||
* duration is too short. Restore the clock source to the 32MHz XOSC and
|
||||
* abort the LPM attempt altogether. We can't drop to PM0,
|
||||
* we need to yield to main() since we may have events to service now.
|
||||
*/
|
||||
select_32_mhz_xosc();
|
||||
|
||||
return;
|
||||
} else if(duration >= DEEP_SLEEP_PM2_THRESHOLD && max_pm == 2) {
|
||||
/* Long sleep duration and PM2 is allowed. Use it */
|
||||
REG(SYS_CTRL_PMCTL) = SYS_CTRL_PMCTL_PM2;
|
||||
} else {
|
||||
/*
|
||||
* Anticipated duration too short for PM2 but long enough for PM1 and we
|
||||
* are allowed to use PM1
|
||||
*/
|
||||
REG(SYS_CTRL_PMCTL) = SYS_CTRL_PMCTL_PM1;
|
||||
}
|
||||
|
||||
/* We are only interested in IRQ energest while idle or in LPM */
|
||||
ENERGEST_IRQ_RESTORE(irq_energest);
|
||||
ENERGEST_OFF(ENERGEST_TYPE_CPU);
|
||||
ENERGEST_ON(ENERGEST_TYPE_LPM);
|
||||
|
||||
/* Remember the current time so we can adjust the clock when we wake up */
|
||||
sleep_enter_time = RTIMER_NOW();
|
||||
|
||||
/*
|
||||
* Last chance to abort entering Deep Sleep.
|
||||
*
|
||||
* - There is the slight off-chance that a SysTick interrupt fired while we
|
||||
* were trying to make up our mind. This may have raised an event.
|
||||
* - The Sleep Timer may have fired
|
||||
*
|
||||
* Check if there is still a scheduled rtimer task and check for pending
|
||||
* events before going to Deep Sleep
|
||||
*/
|
||||
if(process_nevents() || rtimer_arch_next_trigger() == 0) {
|
||||
/* Event flag raised or rtimer inactive.
|
||||
* Turn on the 32MHz XOSC, restore PMCTL and abort */
|
||||
select_32_mhz_xosc();
|
||||
|
||||
REG(SYS_CTRL_PMCTL) = SYS_CTRL_PMCTL_PM0;
|
||||
} else {
|
||||
/* All clear. Assert WFI and drop to PM1/2. This is now un-interruptible */
|
||||
assert_wfi();
|
||||
}
|
||||
|
||||
/*
|
||||
* We reach here after coming back from PM1/2. The interrupt context that
|
||||
* woke us up has returned. lpm_exit() has run, it has switched the system
|
||||
* clock source back to the 32MHz XOSC, it has adjusted the system clock,
|
||||
* it has restored PMCTL and it has done energest housekeeping
|
||||
*/
|
||||
return;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
lpm_set_max_pm(uint8_t pm)
|
||||
{
|
||||
max_pm = pm > LPM_CONF_MAX_PM ? LPM_CONF_MAX_PM : pm;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
lpm_init()
|
||||
{
|
||||
/*
|
||||
* The main loop calls lpm_enter() when we have no more events to service.
|
||||
* By default, we will enter PM0 unless lpm_enter() decides otherwise
|
||||
*/
|
||||
REG(SYS_CTRL_PMCTL) = SYS_CTRL_PMCTL_PM0;
|
||||
REG(SCB_SYSCTRL) |= SCB_SYSCTRL_SLEEPDEEP;
|
||||
|
||||
max_pm = LPM_CONF_MAX_PM;
|
||||
|
||||
LPM_STATS_INIT();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
189
cpu/cc2538/lpm.h
Normal file
189
cpu/cc2538/lpm.h
Normal file
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
* Copyright (c) 2013, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-lpm cc2538 Low Power Modes
|
||||
*
|
||||
* Driver for the cc2538 power modes
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register, macro and function declarations for the cc2538
|
||||
* low power module
|
||||
*/
|
||||
#ifndef LPM_H_
|
||||
#define LPM_H_
|
||||
|
||||
#include "contiki-conf.h"
|
||||
#include "rtimer.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name LPM stats
|
||||
*
|
||||
* Maintains a record of how many rtimer ticks spent in each Power Mode.
|
||||
* Mainly used for debugging the module
|
||||
* @{
|
||||
*/
|
||||
#if LPM_CONF_STATS
|
||||
extern rtimer_clock_t lpm_stats[3];
|
||||
|
||||
/**
|
||||
* \brief Read the time spent in a PM in rtimer ticks
|
||||
* \param pm The pm as a value in [0,2]
|
||||
*/
|
||||
#define LPM_STATS_GET(pm) lpm_stats[pm]
|
||||
#else
|
||||
#define LPM_STATS_GET(pm)
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Constants to be used as arguments to lpm_set_max_pm()
|
||||
* @{
|
||||
*/
|
||||
#define LPM_PM0 0
|
||||
#define LPM_PM1 1
|
||||
#define LPM_PM2 2
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the LPM module
|
||||
*/
|
||||
void lpm_init(void);
|
||||
|
||||
/**
|
||||
* \brief Drop to Deep Sleep
|
||||
*
|
||||
* This function triggers a sequence to enter Deep Sleep. The sequence involves
|
||||
* determining the most suitable PM and switching the system clock source to
|
||||
* the 16MHz if required. If the energest module is enabled, the sequence also
|
||||
* performs some simple energest calculations.
|
||||
*
|
||||
* Broadly speaking, this function will be called from the main loop when all
|
||||
* events have been serviced. This functions aims to be clever enough in order
|
||||
* to be able to choose between PMs 0/1/2 depending on chip status and
|
||||
* anticipated sleep duration. This choice is made subject to configuration
|
||||
* restrictions and subject to restrictions imposed by calls to
|
||||
* lpm_set_max_pm().
|
||||
*
|
||||
* This PM selection heuristic has the following primary criteria:
|
||||
* - Is the RF off?
|
||||
* - Is the USB PLL off?
|
||||
* - Is the Sleep Timer scheduled to fire an interrupt?
|
||||
*
|
||||
* If the answer to any of those questions is no, we will drop to PM0 and
|
||||
* will wake up to any interrupt. Best case scenario (if nothing else happens),
|
||||
* we will idle until the next SysTick in no more than 1000/CLOCK_SECOND ms
|
||||
* (7.8125ms).
|
||||
*
|
||||
* If all can be answered with 'yes', we can drop to PM1/2 knowing that the
|
||||
* Sleep Timer will wake us up. Depending on the estimated deep sleep duration
|
||||
* and the max PM allowed by user configuration, we select the most efficient
|
||||
* Power Mode to drop to. If the duration is too short, we simply IDLE in PM0.
|
||||
*
|
||||
* Dropping to PM1/2 requires a switch to the 16MHz OSC. We have the option of
|
||||
* letting the SoC do this for us automatically. However, if an interrupt fires
|
||||
* during this automatic switch, we will need to re-assert WFI. To avoid this
|
||||
* complexity, we perform the switch to the 16MHz OSC manually in software and
|
||||
* we assert WFI after the transition has been completed. This gives us a
|
||||
* chance to bail out if an interrupt fires or an event is raised during the
|
||||
* transition. If nothing happens, dropping to PM1+ is un-interruptible and
|
||||
* with a deterministic duration. When we wake up, we switch back to the 32MHz
|
||||
* OSC manually before handing control back to main. This is implemented in
|
||||
* lpm_exit(), which will always be called from within the Sleep Timer ISR
|
||||
* context.
|
||||
*
|
||||
* \sa main(), rtimer_arch_next_trigger(), lpm_exit(), lpm_set_max_pm()
|
||||
*/
|
||||
void lpm_enter(void);
|
||||
|
||||
/**
|
||||
* \brief Perform an 'Exit Deep Sleep' sequence
|
||||
*
|
||||
* This routine is called from within the context of the ISR that caused us to
|
||||
* come out of PM1/2. It performs a wake up sequence to make sure the 32MHz OSC
|
||||
* is back on and the system clock is sourced on it.
|
||||
*
|
||||
* While in PMs 1 and 2, the system clock stops ticking. This functions adjusts
|
||||
* it when we wake up.
|
||||
*
|
||||
* We always exit PM1/2 as a result of a scheduled rtimer task or a GPIO
|
||||
* interrupt. This may lead to other parts of the code trying to use the RF,
|
||||
* so we need to switch the clock source \e before said code gets executed.
|
||||
*
|
||||
* \sa lpm_enter(), rtimer_isr()
|
||||
*/
|
||||
void lpm_exit(void);
|
||||
|
||||
/**
|
||||
* \brief Prevent the SoC from dropping to a PM higher than \e max_pm
|
||||
* \param pm The highest PM we are allowed to enter, specified as a
|
||||
* number in [0, 2]
|
||||
*
|
||||
* Defines for the \e pm argument are LPM_PMx.
|
||||
*
|
||||
* This function can be used by software in situations where some power
|
||||
* modes are undesirable. If, for example, an application needs to avoid PM2,
|
||||
* it would call lpm_set_max_pm(LPM_PM1).
|
||||
* If an application wants to avoid PM1 as well, it would call
|
||||
* lpm_set_max_pm(LPM_PM0)
|
||||
*
|
||||
* PM0 can not be disabled at runtime. Use LPM_CONF_ENABLE to disable LPM
|
||||
* support altogether
|
||||
*
|
||||
* \note If the value of argument \e pm is greater than the value of the
|
||||
* LPM_CONF_MAX_PM configuration directive, LPM_CONF_MAX_PM is used. Thus
|
||||
* if LPM_CONF_MAX_PM==1, calling lpm_set_max_pm(LPM_PM2) would
|
||||
* result in a maximum PM set to 1 and all subsequent Deep Sleeps would
|
||||
* be limited to either PM0 or PM1.
|
||||
*
|
||||
* \sa lpm_enter()
|
||||
*/
|
||||
void lpm_set_max_pm(uint8_t pm);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Disable the entire module if required */
|
||||
#if LPM_CONF_ENABLE==0
|
||||
#define lpm_init()
|
||||
#define lpm_enter()
|
||||
#define lpm_exit()
|
||||
#define lpm_set_max_pm(...)
|
||||
#endif
|
||||
|
||||
#endif /* LPM_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
48
cpu/cc2538/mtarch.h
Normal file
48
cpu/cc2538/mtarch.h
Normal file
|
|
@ -0,0 +1,48 @@
|
|||
/*
|
||||
* Copyright (c) 2010, Loughborough University - Computer Science
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above
|
||||
* copyright notice, this list of conditions and the following
|
||||
* disclaimer in the documentation and/or other materials provided
|
||||
* with the distribution.
|
||||
* 3. The name of the author may not be used to endorse or promote
|
||||
* products derived from this software without specific prior
|
||||
* written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*/
|
||||
/*
|
||||
* \file
|
||||
* Stub header file for multi-threading. It doesn't do anything, it
|
||||
* just exists so that mt.c can compile cleanly.
|
||||
*
|
||||
* This is based on the original mtarch.h for z80 by Takahide Matsutsuka
|
||||
*
|
||||
* \author
|
||||
* George Oikonomou - <oikonomou@users.sourceforge.net>
|
||||
*/
|
||||
#ifndef __MTARCH_H__
|
||||
#define __MTARCH_H__
|
||||
|
||||
struct mtarch_thread {
|
||||
unsigned char *sp;
|
||||
};
|
||||
|
||||
#endif /* __MTARCH_H__ */
|
||||
64
cpu/cc2538/reg.h
Normal file
64
cpu/cc2538/reg.h
Normal file
|
|
@ -0,0 +1,64 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-reg cc2538 Register Manipulation
|
||||
*
|
||||
* Macros for hardware access, both direct and via the bit-band region.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with register manipulation macro definitions
|
||||
*/
|
||||
#ifndef REG_H_
|
||||
#define REG_H_
|
||||
|
||||
#define REG(x) (*((volatile unsigned long *)(x)))
|
||||
#define REG_H(x) (*((volatile unsigned short *)(x)))
|
||||
#define REG_B(x) (*((volatile unsigned char *)(x)))
|
||||
#define REG_BIT_W(x, b) \
|
||||
REG(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \
|
||||
(((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
|
||||
#define REG_BIT_H(x, b) \
|
||||
REG_H(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \
|
||||
(((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
|
||||
#define REG_BIT_B(x, b) \
|
||||
REG_B(((unsigned long)(x) & 0xF0000000) | 0x02000000 | \
|
||||
(((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
|
||||
|
||||
#endif /* REG_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
158
cpu/cc2538/rtimer-arch.c
Normal file
158
cpu/cc2538/rtimer-arch.c
Normal file
|
|
@ -0,0 +1,158 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-rtimer
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of the arch-specific rtimer functions for the cc2538
|
||||
*
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/energest.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "dev/smwdthrosc.h"
|
||||
#include "cpu.h"
|
||||
#include "lpm.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static volatile rtimer_clock_t next_trigger;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief We don't need to explicitly initialise anything but this
|
||||
* routine is required by the API.
|
||||
*
|
||||
* The Sleep Timer starts ticking automatically as soon as the device
|
||||
* turns on. We don't need to turn on interrupts before the first call
|
||||
* to rtimer_arch_schedule()
|
||||
*/
|
||||
void
|
||||
rtimer_arch_init(void)
|
||||
{
|
||||
return;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Schedules an rtimer task to be triggered at time t
|
||||
* \param t The time when the task will need executed. This is an absolute
|
||||
* time, in other words the task will be executed AT time \e t,
|
||||
* not IN \e t ticks
|
||||
*/
|
||||
void
|
||||
rtimer_arch_schedule(rtimer_clock_t t)
|
||||
{
|
||||
rtimer_clock_t now;
|
||||
|
||||
/* STLOAD must be 1 */
|
||||
while((REG(SMWDTHROSC_STLOAD) & SMWDTHROSC_STLOAD_STLOAD) != 1);
|
||||
|
||||
INTERRUPTS_DISABLE();
|
||||
|
||||
now = RTIMER_NOW();
|
||||
|
||||
/*
|
||||
* New value must be 5 ticks in the future. The ST may tick once while we're
|
||||
* writing the registers. We play it safe here and we add a bit of leeway
|
||||
*/
|
||||
if((int32_t)(t - now) < 7) {
|
||||
t = now + 7;
|
||||
}
|
||||
|
||||
/* ST0 latches ST[1:3] and must be written last */
|
||||
REG(SMWDTHROSC_ST3) = (t >> 24) & 0x000000FF;
|
||||
REG(SMWDTHROSC_ST2) = (t >> 16) & 0x000000FF;
|
||||
REG(SMWDTHROSC_ST1) = (t >> 8) & 0x000000FF;
|
||||
REG(SMWDTHROSC_ST0) = t & 0x000000FF;
|
||||
|
||||
INTERRUPTS_ENABLE();
|
||||
|
||||
/* Store the value. The LPM module will query us for it */
|
||||
next_trigger = t;
|
||||
|
||||
nvic_interrupt_enable(NVIC_INT_SM_TIMER);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
rtimer_clock_t
|
||||
rtimer_arch_next_trigger()
|
||||
{
|
||||
return next_trigger;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the current real-time clock time
|
||||
* \return The current rtimer time in ticks
|
||||
*/
|
||||
rtimer_clock_t
|
||||
rtimer_arch_now()
|
||||
{
|
||||
rtimer_clock_t rv;
|
||||
|
||||
/* SMWDTHROSC_ST0 latches ST[1:3] and must be read first */
|
||||
rv = REG(SMWDTHROSC_ST0);
|
||||
rv |= (REG(SMWDTHROSC_ST1) << 8);
|
||||
rv |= (REG(SMWDTHROSC_ST2) << 16);
|
||||
rv |= (REG(SMWDTHROSC_ST3) << 24);
|
||||
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief The rtimer ISR
|
||||
*
|
||||
* Interrupts are only turned on when we have an rtimer task to schedule
|
||||
* Once the interrupt fires, the task is called and then interrupts no
|
||||
* longer get acknowledged until the next task needs scheduled.
|
||||
*/
|
||||
void
|
||||
rtimer_isr()
|
||||
{
|
||||
ENERGEST_ON(ENERGEST_TYPE_IRQ);
|
||||
|
||||
next_trigger = 0;
|
||||
|
||||
nvic_interrupt_unpend(NVIC_INT_SM_TIMER);
|
||||
nvic_interrupt_disable(NVIC_INT_SM_TIMER);
|
||||
|
||||
/*
|
||||
* If we were in PM1+, call the wake-up sequence first. This will make sure
|
||||
* that the 32MHz OSC is selected as the clock source. We need to do this
|
||||
* before calling the next rtimer_task, since the task may need the RF.
|
||||
*/
|
||||
lpm_exit();
|
||||
|
||||
rtimer_run_next();
|
||||
|
||||
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
82
cpu/cc2538/rtimer-arch.h
Normal file
82
cpu/cc2538/rtimer-arch.h
Normal file
|
|
@ -0,0 +1,82 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-rtimer cc2538 rtimer
|
||||
*
|
||||
* Implementation of the rtimer module for the cc2538
|
||||
*
|
||||
* The rtimer runs on the Sleep Timer. This is a design choice, as many parts
|
||||
* of Contiki like rtimers with a value of RTIMER_ARCH_SECOND being a power of
|
||||
* two. The ST runs on the 32kHz clock, which can provide us with an excellent
|
||||
* value of 32768 for RTIMER_ARCH_SECOND.
|
||||
*
|
||||
* Additionally, since the ST keeps running in PM2, we can do things like drop
|
||||
* to PM2 and schedule a wake-up time through the rtimer API.
|
||||
*
|
||||
* \note If the 32kHz clock is running on the 32kHz RC OSC, the rtimer is
|
||||
* not 100% accurate (the RC OSC does not run at exactly 32.768 kHz). For
|
||||
* applications requiring higher accuracy, the 32kHz clock should be changed to
|
||||
* use the XOSC as its source. To see which low-frequency OSC the 32kHz clock
|
||||
* is running on, see cpu/cc2538/clock.c.
|
||||
*
|
||||
* \sa cpu/cc2538/clock.c
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* \file
|
||||
* Header file for the cc2538 rtimer driver
|
||||
*/
|
||||
#ifndef RTIMER_ARCH_H_
|
||||
#define RTIMER_ARCH_H_
|
||||
|
||||
#include "contiki.h"
|
||||
#include "dev/gptimer.h"
|
||||
|
||||
#define RTIMER_ARCH_SECOND 32768
|
||||
|
||||
/** \sa RTIMER_NOW() */
|
||||
rtimer_clock_t rtimer_arch_now(void);
|
||||
|
||||
/**
|
||||
* \brief Get the time of the next scheduled rtimer trigger
|
||||
* \return The time next rtimer ISR is scheduled for
|
||||
*/
|
||||
rtimer_clock_t rtimer_arch_next_trigger(void);
|
||||
|
||||
#endif /* RTIMER_ARCH_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
86
cpu/cc2538/slip-arch.c
Normal file
86
cpu/cc2538/slip-arch.c
Normal file
|
|
@ -0,0 +1,86 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-char-io
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Arch-specific SLIP functions for the cc2538
|
||||
*
|
||||
* SLIP can be configured to operate over UART or over USB-Serial, depending
|
||||
* on the value of SLIP_ARCH_CONF_USB
|
||||
*/
|
||||
#include "contiki-conf.h"
|
||||
#include "dev/slip.h"
|
||||
#include "dev/uart.h"
|
||||
#include "usb/usb-serial.h"
|
||||
|
||||
#ifndef SLIP_ARCH_CONF_USB
|
||||
#define SLIP_ARCH_CONF_USB 0
|
||||
#endif
|
||||
|
||||
#if SLIP_ARCH_CONF_USB
|
||||
#define write_byte(b) usb_serial_writeb(b)
|
||||
#define set_input(f) usb_serial_set_input(f)
|
||||
#define flush() usb_serial_flush()
|
||||
#else
|
||||
#define write_byte(b) uart_write_byte(b)
|
||||
#define set_input(f) uart_set_input(f)
|
||||
#define flush()
|
||||
#endif
|
||||
|
||||
#define SLIP_END 0300
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Write a byte over SLIP
|
||||
* \param c the byte
|
||||
*/
|
||||
void
|
||||
slip_arch_writeb(unsigned char c)
|
||||
{
|
||||
write_byte(c);
|
||||
if(c == SLIP_END) {
|
||||
flush();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the arch-specific SLIP driver
|
||||
* \param ubr Ignored for the cc2538
|
||||
*/
|
||||
void
|
||||
slip_arch_init(unsigned long ubr)
|
||||
{
|
||||
set_input(slip_input_byte);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
167
cpu/cc2538/usb/cdc-acm-descriptors.c
Normal file
167
cpu/cc2538/usb/cdc-acm-descriptors.c
Normal file
|
|
@ -0,0 +1,167 @@
|
|||
/*
|
||||
* Copyright (c) 2009, Simon Berg
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-usb
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* CDC-ACM mode USB descriptor for the cc2538 USB controller
|
||||
*
|
||||
* This file is a copy of cpu/arm/common/usb/cdc-acm/cdc-acm-descriptors.c
|
||||
* with the only change being the values for VID and PID
|
||||
*/
|
||||
#include "descriptors.h"
|
||||
#include "contiki-conf.h"
|
||||
#include "cdc.h"
|
||||
#include "usb-arch.h"
|
||||
|
||||
const struct usb_st_device_descriptor device_descriptor =
|
||||
{
|
||||
sizeof(struct usb_st_device_descriptor),
|
||||
DEVICE,
|
||||
0x0200,
|
||||
CDC,
|
||||
0,
|
||||
0,
|
||||
CTRL_EP_SIZE,
|
||||
0x0451, /* Vendor: TI */
|
||||
0x16C8, /* Product: cc2538EM ("CC2538 USB CDC") */
|
||||
0x0000,
|
||||
1,
|
||||
2,
|
||||
3,
|
||||
1
|
||||
};
|
||||
|
||||
const struct configuration_st {
|
||||
struct usb_st_configuration_descriptor configuration;
|
||||
struct usb_st_interface_descriptor comm;
|
||||
struct usb_cdc_header_func_descriptor header;
|
||||
struct usb_cdc_abstract_ctrl_mgmnt_func_descriptor abstract_ctrl;
|
||||
struct usb_cdc_union_func_descriptor union_descr;
|
||||
struct usb_cdc_call_mgmnt_func_descriptor call_mgmt;
|
||||
#if 1
|
||||
struct usb_st_endpoint_descriptor ep_notification;
|
||||
#endif
|
||||
struct usb_st_interface_descriptor data;
|
||||
struct usb_st_endpoint_descriptor ep_in;
|
||||
struct usb_st_endpoint_descriptor ep_out;
|
||||
} configuration_block =
|
||||
{
|
||||
/* Configuration */
|
||||
{
|
||||
sizeof(configuration_block.configuration),
|
||||
CONFIGURATION,
|
||||
sizeof(configuration_block),
|
||||
2,
|
||||
1,
|
||||
0,
|
||||
0x80,
|
||||
250
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.comm),
|
||||
INTERFACE,
|
||||
0,
|
||||
0,
|
||||
1,
|
||||
CDC,
|
||||
ABSTRACT_CONTROL_MODEL,
|
||||
V_25TER_PROTOCOL,
|
||||
0
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.header),
|
||||
CS_INTERFACE,
|
||||
CDC_FUNC_DESCR_HEADER,
|
||||
0x0110
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.abstract_ctrl),
|
||||
CS_INTERFACE,
|
||||
CDC_FUNC_DESCR_ABSTRACT_CTRL_MGMNT,
|
||||
0x2, /** Set line coding */
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.union_descr),
|
||||
CS_INTERFACE,
|
||||
CDC_FUNC_DESCR_UNION,
|
||||
0, /** Master */
|
||||
{1} /** Slave */
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.call_mgmt),
|
||||
CS_INTERFACE,
|
||||
CDC_FUNC_DESCR_CALL_MGMNT,
|
||||
0x00,
|
||||
1 /** data interface */
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.ep_notification),
|
||||
ENDPOINT,
|
||||
0x81,
|
||||
0x03,
|
||||
USB_EP1_SIZE,
|
||||
255 /** 255ms polling, not really used so maximum value used */
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.data),
|
||||
INTERFACE,
|
||||
1,
|
||||
0,
|
||||
2,
|
||||
CDC_DATA,
|
||||
0,
|
||||
0, /** TRANSPARENT_PROTOCOL*/
|
||||
0
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.ep_in),
|
||||
ENDPOINT,
|
||||
0x82,
|
||||
0x02,
|
||||
USB_EP2_SIZE,
|
||||
0
|
||||
},
|
||||
{
|
||||
sizeof(configuration_block.ep_out),
|
||||
ENDPOINT,
|
||||
0x03,
|
||||
0x02,
|
||||
USB_EP3_SIZE,
|
||||
0
|
||||
}
|
||||
|
||||
};
|
||||
|
||||
const struct usb_st_configuration_descriptor const *configuration_head =
|
||||
(struct usb_st_configuration_descriptor const *)&configuration_block;
|
||||
|
||||
/** @} */
|
||||
1256
cpu/cc2538/usb/usb-arch.c
Normal file
1256
cpu/cc2538/usb/usb-arch.c
Normal file
File diff suppressed because it is too large
Load diff
319
cpu/cc2538/usb/usb-serial.c
Normal file
319
cpu/cc2538/usb/usb-serial.c
Normal file
|
|
@ -0,0 +1,319 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Philippe Retornaz
|
||||
* Copyright (c) 2012, EPFL STI IMT LSRO1 -- Mobots group
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-usb
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Platform process which implements a UART-like functionality over the
|
||||
* cc2538's USB hardware.
|
||||
*
|
||||
* This has been ported over from platform/cc2530dk
|
||||
*
|
||||
* \author
|
||||
* - Philippe Retornaz (EPFL) - Original code
|
||||
* - George Oikonomou - <oikonomou@users.sourceforge.net>
|
||||
* Turned this to a 'serial over USB' platform process, ported for cc2538
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/process.h"
|
||||
#include "net/rime/rimeaddr.h"
|
||||
#include "usb-api.h"
|
||||
#include "usb.h"
|
||||
#include "usb-arch.h"
|
||||
#include "cdc-acm/cdc-acm.h"
|
||||
#include "ieee-addr.h"
|
||||
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
|
||||
#if DEBUG
|
||||
#include <stdio.h>
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
struct lang_id {
|
||||
uint8_t size;
|
||||
uint8_t type;
|
||||
uint16_t langid;
|
||||
};
|
||||
static const struct lang_id lang_id = { sizeof(lang_id), 3, 0x0409 };
|
||||
/*---------------------------------------------------------------------------*/
|
||||
struct serial_nr {
|
||||
uint8_t size;
|
||||
uint8_t type;
|
||||
uint16_t string[16];
|
||||
};
|
||||
static struct serial_nr serial_nr = {
|
||||
sizeof(serial_nr),
|
||||
3, {
|
||||
'A', 'A', 'A', 'A', 'A', 'A', 'A', 'A',
|
||||
'A', 'A', 'A', 'A', 'A', 'A', 'A', 'A'
|
||||
}
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
struct manufacturer {
|
||||
uint8_t size;
|
||||
uint8_t type;
|
||||
uint16_t string[17];
|
||||
};
|
||||
static const struct manufacturer manufacturer = {
|
||||
sizeof(manufacturer),
|
||||
3,
|
||||
{
|
||||
'T', 'e', 'x', 'a', 's', ' ',
|
||||
'I', 'n', 's', 't', 'r', 'u', 'm', 'e', 'n', 't', 's'
|
||||
}
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
struct product {
|
||||
uint8_t size;
|
||||
uint8_t type;
|
||||
uint16_t string[21];
|
||||
};
|
||||
static const struct product product = {
|
||||
sizeof(product),
|
||||
3,
|
||||
{
|
||||
'c', 'c', '2', '5', '3', '8', ' ',
|
||||
'S', 'y', 's', 't', 'e', 'm', '-', 'o', 'n', '-', 'C', 'h', 'i', 'p'
|
||||
}
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define EPIN 0x82
|
||||
#define EPOUT 0x03
|
||||
|
||||
#define RX_BUFFER_SIZE USB_EP3_SIZE
|
||||
#define TX_BUFFER_SIZE (USB_EP2_SIZE - 1)
|
||||
|
||||
typedef struct _USBBuffer usb_buffer;
|
||||
|
||||
static usb_buffer data_rx_urb;
|
||||
static usb_buffer data_tx_urb;
|
||||
static uint8_t usb_rx_data[RX_BUFFER_SIZE];
|
||||
static uint8_t enabled = 0;
|
||||
|
||||
#define SLIP_END 0300
|
||||
static uint8_t usb_tx_data[TX_BUFFER_SIZE];
|
||||
static uint8_t buffered_data = 0;
|
||||
|
||||
/* Callback to the input handler */
|
||||
static int (* input_handler)(unsigned char c);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
uint8_t *
|
||||
usb_class_get_string_descriptor(uint16_t lang, uint8_t string)
|
||||
{
|
||||
switch (string) {
|
||||
case 0:
|
||||
return (uint8_t *)&lang_id;
|
||||
case 1:
|
||||
return (uint8_t *)&manufacturer;
|
||||
case 2:
|
||||
return (uint8_t *)&product;
|
||||
case 3:
|
||||
return (uint8_t *)&serial_nr;
|
||||
default:
|
||||
return NULL;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
set_serial_number(void)
|
||||
{
|
||||
uint8_t i;
|
||||
uint8_t ieee[8];
|
||||
uint8_t lown, highn;
|
||||
uint8_t c;
|
||||
|
||||
ieee_addr_cpy_to(ieee, 8);
|
||||
|
||||
for(i = 0; i < 8; i++) {
|
||||
lown = ieee[i] & 0x0F;
|
||||
highn = ieee[i] >> 4;
|
||||
c = lown > 9 ? 'A' + lown - 0xA : lown + '0';
|
||||
serial_nr.string[i * 2 + 1] = c;
|
||||
c = highn > 9 ? 'A' + highn - 0xA : highn + '0';
|
||||
serial_nr.string[i * 2] = c;
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
queue_rx_urb(void)
|
||||
{
|
||||
data_rx_urb.flags = USB_BUFFER_PACKET_END;
|
||||
data_rx_urb.flags |= USB_BUFFER_NOTIFY;
|
||||
data_rx_urb.data = usb_rx_data;
|
||||
data_rx_urb.left = RX_BUFFER_SIZE;
|
||||
data_rx_urb.next = NULL;
|
||||
usb_submit_recv_buffer(EPOUT, &data_rx_urb);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
do_work(void)
|
||||
{
|
||||
unsigned int events;
|
||||
|
||||
events = usb_get_global_events();
|
||||
if(events & USB_EVENT_CONFIG) {
|
||||
/* Configure EPs. Don't enable them yet, until the CDC line is up */
|
||||
usb_setup_bulk_endpoint(EPIN);
|
||||
usb_setup_bulk_endpoint(EPOUT);
|
||||
|
||||
queue_rx_urb();
|
||||
}
|
||||
if(events & USB_EVENT_RESET) {
|
||||
enabled = 0;
|
||||
}
|
||||
|
||||
events = usb_cdc_acm_get_events();
|
||||
if(events & USB_CDC_ACM_LINE_STATE) {
|
||||
uint8_t line_state = usb_cdc_acm_get_line_state();
|
||||
PRINTF("CDC-ACM event 0x%04x, Line State = %u\n", events, line_state);
|
||||
if(line_state == 0) {
|
||||
/* CDC-ACM line went down. Stop streaming */
|
||||
enabled = 0;
|
||||
} else if(line_state == (USB_CDC_ACM_DTE | USB_CDC_ACM_RTS)) {
|
||||
enabled = 1;
|
||||
} else {
|
||||
/*
|
||||
* During tests on Ubuntu and OS X, line_state never stays == 2
|
||||
* (USB_CDC_ACM_RTS) for too long. We always see this value when the
|
||||
* line is in the process of going up or coming down. If it is going
|
||||
* up, value 3 will enable us shortly. Otherwise, we may as well
|
||||
* disable already.
|
||||
*
|
||||
* All other values: disable
|
||||
*/
|
||||
enabled = 0;
|
||||
}
|
||||
}
|
||||
|
||||
if(!enabled) {
|
||||
return;
|
||||
}
|
||||
|
||||
events = usb_get_ep_events(EPOUT);
|
||||
if((events & USB_EP_EVENT_NOTIFICATION)
|
||||
&& !(data_rx_urb.flags & USB_BUFFER_SUBMITTED)) {
|
||||
if(!(data_rx_urb.flags & USB_BUFFER_FAILED)) {
|
||||
if(input_handler) {
|
||||
uint8_t len;
|
||||
uint8_t i;
|
||||
|
||||
len = RX_BUFFER_SIZE - data_rx_urb.left;
|
||||
for(i = 0; i < len; i++) {
|
||||
input_handler(usb_rx_data[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
queue_rx_urb();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
usb_serial_flush()
|
||||
{
|
||||
if(buffered_data == 0) {
|
||||
return;
|
||||
}
|
||||
|
||||
data_tx_urb.flags = USB_BUFFER_SHORT_END;
|
||||
data_tx_urb.flags |= USB_BUFFER_NOTIFY;
|
||||
data_tx_urb.next = NULL;
|
||||
data_tx_urb.data = usb_tx_data;
|
||||
data_tx_urb.left = buffered_data;
|
||||
buffered_data = 0;
|
||||
usb_submit_xmit_buffer(EPIN, &data_tx_urb);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
usb_serial_writeb(uint8_t b)
|
||||
{
|
||||
if(!enabled) {
|
||||
buffered_data = 0;
|
||||
return;
|
||||
}
|
||||
|
||||
usb_tx_data[buffered_data] = b;
|
||||
buffered_data++;
|
||||
|
||||
if(buffered_data == TX_BUFFER_SIZE) {
|
||||
usb_serial_flush();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(usb_serial_process, "USB-Serial process");
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(usb_serial_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
set_serial_number();
|
||||
|
||||
usb_setup();
|
||||
usb_cdc_acm_setup();
|
||||
usb_set_global_event_process(&usb_serial_process);
|
||||
usb_cdc_acm_set_event_process(&usb_serial_process);
|
||||
usb_set_ep_event_process(EPIN, &usb_serial_process);
|
||||
usb_set_ep_event_process(EPOUT, &usb_serial_process);
|
||||
|
||||
while(1) {
|
||||
PROCESS_WAIT_EVENT();
|
||||
if(ev == PROCESS_EVENT_EXIT) {
|
||||
break;
|
||||
}
|
||||
if(ev == PROCESS_EVENT_POLL) {
|
||||
do_work();
|
||||
}
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
usb_serial_set_input(int (* input)(unsigned char c))
|
||||
{
|
||||
input_handler = input;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
usb_serial_init()
|
||||
{
|
||||
process_start(&usb_serial_process, NULL);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
73
cpu/cc2538/usb/usb-serial.h
Normal file
73
cpu/cc2538/usb/usb-serial.h
Normal file
|
|
@ -0,0 +1,73 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-usb
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for cc2538's UART-like I/O over USB
|
||||
*/
|
||||
#ifndef USB_SERIAL_H_
|
||||
#define USB_SERIAL_H_
|
||||
|
||||
#include "contiki.h"
|
||||
|
||||
/**
|
||||
* \brief Initialise the Serial-over-USB process
|
||||
*/
|
||||
void usb_serial_init(void);
|
||||
|
||||
/**
|
||||
* \brief Write a byte over USB
|
||||
* \param b The byte
|
||||
* \sa usb_serial_flush()
|
||||
*
|
||||
* USB-Serial output is buffered. The buffer is actually submitted to the USB
|
||||
* controller for transmission when:
|
||||
* - It is full or
|
||||
* - The code explicitly calls usb_serial_flush()
|
||||
*/
|
||||
void usb_serial_writeb(uint8_t b);
|
||||
|
||||
/**
|
||||
* \brief Set an input hook for bytes received over USB
|
||||
* \param input A pointer to a function to be called when a byte is received
|
||||
*/
|
||||
void usb_serial_set_input(int (* input)(unsigned char c));
|
||||
|
||||
/**
|
||||
* \brief Immediately transmit the content of Serial-over-USB TX buffers
|
||||
* \sa usb_serial_writeb()
|
||||
*/
|
||||
void usb_serial_flush(void);
|
||||
|
||||
#endif /* USB_SERIAL_H_ */
|
||||
|
||||
/** @} */
|
||||
7
examples/cc2538dk/Makefile
Normal file
7
examples/cc2538dk/Makefile
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
|
||||
CONTIKI_PROJECT = cc2538-demo timer-test
|
||||
|
||||
all: $(CONTIKI_PROJECT)
|
||||
|
||||
CONTIKI = ../..
|
||||
include $(CONTIKI)/Makefile.include
|
||||
1
examples/cc2538dk/Makefile.target
Normal file
1
examples/cc2538dk/Makefile.target
Normal file
|
|
@ -0,0 +1 @@
|
|||
TARGET = cc2538dk
|
||||
160
examples/cc2538dk/cc2538-demo.c
Normal file
160
examples/cc2538dk/cc2538-demo.c
Normal file
|
|
@ -0,0 +1,160 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-examples cc2538dk Example Projects
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-demo cc2538dk Demo Project
|
||||
*
|
||||
* Example project demonstrating the cc2538dk functionality
|
||||
*
|
||||
* This assumes that you are using a SmartRF06EB with a cc2538 EM
|
||||
*
|
||||
* - Boot sequence: LEDs flashing, LED2 followed by LED3 then LED4
|
||||
* - etimer/clock : Every LOOP_INTERVAL clock ticks the LED defined as
|
||||
* LEDS_PERIODIC will turn on
|
||||
* - rtimer : Exactly LEDS_OFF_HYSTERISIS rtimer ticks later,
|
||||
* LEDS_PERIODIC will turn back off
|
||||
* - Buttons :
|
||||
* - BTN_DOWN turns on LEDS_REBOOT and causes a watchdog reboot
|
||||
* - BTN_UP to soft reset (SYS_CTRL_PWRDBG::FORCE_WARM_RESET)
|
||||
* - BTN_LEFT and BTN_RIGHT flash the LED defined as LEDS_BUTTON
|
||||
* - UART : Every LOOP_INTERVAL the EM will print something over the
|
||||
* UART. Receiving an entire line of text over UART (ending
|
||||
* in \\r) will cause LEDS_SERIAL_IN to toggle
|
||||
* - Radio comms : BTN_SELECT sends a rime broadcast. Reception of a rime
|
||||
* packet will toggle LEDs defined as LEDS_RF_RX
|
||||
*
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Example demonstrating the cc2538dk platform
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "cpu.h"
|
||||
#include "sys/etimer.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/uart.h"
|
||||
#include "dev/button-sensor.h"
|
||||
#include "dev/watchdog.h"
|
||||
#include "dev/serial-line.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "net/rime/broadcast.h"
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdint.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define LOOP_INTERVAL CLOCK_SECOND
|
||||
#define LEDS_OFF_HYSTERISIS (RTIMER_SECOND >> 1)
|
||||
#define LEDS_PERIODIC LEDS_YELLOW
|
||||
#define LEDS_BUTTON LEDS_RED
|
||||
#define LEDS_SERIAL_IN LEDS_ORANGE
|
||||
#define LEDS_REBOOT LEDS_ALL
|
||||
#define LEDS_RF_RX (LEDS_YELLOW | LEDS_ORANGE)
|
||||
#define BROADCAST_CHANNEL 129
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct etimer et;
|
||||
static struct rtimer rt;
|
||||
static uint16_t counter;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(cc2538_demo_process, "cc2538 demo process");
|
||||
AUTOSTART_PROCESSES(&cc2538_demo_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
broadcast_recv(struct broadcast_conn *c, const rimeaddr_t *from)
|
||||
{
|
||||
leds_toggle(LEDS_RF_RX);
|
||||
printf("Received %u bytes: '0x%04x'\n", packetbuf_datalen(),
|
||||
*(uint16_t *)packetbuf_dataptr());
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static const struct broadcast_callbacks bc_rx = { broadcast_recv };
|
||||
static struct broadcast_conn bc;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
rt_callback(struct rtimer *t, void *ptr)
|
||||
{
|
||||
leds_off(LEDS_PERIODIC);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(cc2538_demo_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_EXITHANDLER(broadcast_close(&bc))
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
counter = 0;
|
||||
broadcast_open(&bc, BROADCAST_CHANNEL, &bc_rx);
|
||||
|
||||
while(1) {
|
||||
etimer_set(&et, CLOCK_SECOND);
|
||||
|
||||
PROCESS_YIELD();
|
||||
|
||||
if(ev == PROCESS_EVENT_TIMER) {
|
||||
leds_on(LEDS_PERIODIC);
|
||||
printf("Counter = 0x%08x\n", counter);
|
||||
|
||||
etimer_set(&et, CLOCK_SECOND);
|
||||
rtimer_set(&rt, RTIMER_NOW() + LEDS_OFF_HYSTERISIS, 1,
|
||||
rt_callback, NULL);
|
||||
} else if(ev == sensors_event) {
|
||||
if(data == &button_select_sensor) {
|
||||
packetbuf_copyfrom(&counter, sizeof(counter));
|
||||
broadcast_send(&bc);
|
||||
} else if(data == &button_left_sensor || data == &button_right_sensor) {
|
||||
leds_toggle(LEDS_BUTTON);
|
||||
} else if(data == &button_down_sensor) {
|
||||
cpu_cpsid();
|
||||
leds_on(LEDS_REBOOT);
|
||||
watchdog_reboot();
|
||||
} else if(data == &button_up_sensor) {
|
||||
sys_ctrl_reset();
|
||||
}
|
||||
} else if(ev == serial_line_event_message) {
|
||||
leds_toggle(LEDS_SERIAL_IN);
|
||||
}
|
||||
counter++;
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
45
examples/cc2538dk/project-conf.h
Normal file
45
examples/cc2538dk/project-conf.h
Normal file
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-examples
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Project specific configuration defines for the basic cc2538dk examples
|
||||
*/
|
||||
#ifndef PROJECT_CONF_H_
|
||||
#define PROJECT_CONF_H_
|
||||
|
||||
#define NETSTACK_CONF_RDC nullrdc_driver
|
||||
|
||||
#endif /* PROJECT_CONF_H_ */
|
||||
|
||||
/** @} */
|
||||
10
examples/cc2538dk/sniffer/Makefile
Normal file
10
examples/cc2538dk/sniffer/Makefile
Normal file
|
|
@ -0,0 +1,10 @@
|
|||
DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
|
||||
PROJECT_SOURCEFILES += stub-rdc.c
|
||||
|
||||
CONTIKI_PROJECT = sniffer
|
||||
|
||||
all: $(CONTIKI_PROJECT)
|
||||
|
||||
CONTIKI = ../../..
|
||||
|
||||
include $(CONTIKI)/Makefile.include
|
||||
1
examples/cc2538dk/sniffer/Makefile.target
Normal file
1
examples/cc2538dk/sniffer/Makefile.target
Normal file
|
|
@ -0,0 +1 @@
|
|||
TARGET = cc2538dk
|
||||
45
examples/cc2538dk/sniffer/netstack.c
Normal file
45
examples/cc2538dk/sniffer/netstack.c
Normal file
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* Copyright (c) 2010, Loughborough University - Computer Science
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \file
|
||||
* Stub file overriding core/net/netstack.c. What we want to achieve
|
||||
* here is call netstack_init from main without initialising the RDC,
|
||||
* MAC and Network layers. It will just turn on the radio instead.
|
||||
*
|
||||
* \author
|
||||
* George Oikonomou - <oikonomou@users.sourceforge.net>
|
||||
*/
|
||||
#include "netstack.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
netstack_init(void)
|
||||
{
|
||||
NETSTACK_RADIO.init();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
49
examples/cc2538dk/sniffer/project-conf.h
Normal file
49
examples/cc2538dk/sniffer/project-conf.h
Normal file
|
|
@ -0,0 +1,49 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-sniffer
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Project specific configuration defines for the cc2538 sniffer
|
||||
*/
|
||||
#ifndef PROJECT_CONF_H_
|
||||
#define PROJECT_CONF_H_
|
||||
|
||||
#define CC2538_RF_CONF_SNIFFER 1
|
||||
#define CC2538_RF_CONF_AUTOACK 0
|
||||
#define NETSTACK_CONF_RDC stub_rdc_driver
|
||||
|
||||
#define UART_CONF_BAUD_RATE 460800
|
||||
|
||||
#endif /* PROJECT_CONF_H_ */
|
||||
|
||||
/** @} */
|
||||
72
examples/cc2538dk/sniffer/sniffer.c
Normal file
72
examples/cc2538dk/sniffer/sniffer.c
Normal file
|
|
@ -0,0 +1,72 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-examples
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-sniffer cc2538dk Sniffer
|
||||
*
|
||||
* Sniffer for the cc2538dk platform. Originally based on the sensinode
|
||||
* and cc2530dk sniffers.
|
||||
*
|
||||
* This example is to be used combined with the sensniff host-side tool,
|
||||
* which can be downloaded from: https://github.com/g-oikonomou/sensniff
|
||||
*
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of a Sniffer Process Thread
|
||||
*/
|
||||
#include "contiki.h"
|
||||
|
||||
#define DEBUG DEBUG_NONE
|
||||
#include "net/uip-debug.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(sniffer_process, "Sniffer process");
|
||||
AUTOSTART_PROCESSES(&sniffer_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(sniffer_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
PRINTF("Sniffer started\n");
|
||||
|
||||
PROCESS_EXIT();
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
96
examples/cc2538dk/sniffer/stub-rdc.c
Normal file
96
examples/cc2538dk/sniffer/stub-rdc.c
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* Copyright (c) 2010, Loughborough University - Computer Science
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the Institute nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \file
|
||||
* Definition of a fake RDC driver to be used with passive
|
||||
* examples. The sniffer will never send packets and it will never
|
||||
* push incoming packets up the stack. We do this by defining this
|
||||
* driver as our RDC. We then drop everything
|
||||
*
|
||||
* \author
|
||||
* George Oikonomou - <oikonomou@users.sourceforge.net>
|
||||
*/
|
||||
#include "net/mac/mac.h"
|
||||
#include "net/mac/rdc.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
send(mac_callback_t sent, void *ptr)
|
||||
{
|
||||
if(sent) {
|
||||
sent(ptr, MAC_TX_OK, 1);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
send_list(mac_callback_t sent, void *ptr, struct rdc_buf_list *list)
|
||||
{
|
||||
if(sent) {
|
||||
sent(ptr, MAC_TX_OK, 1);
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
input(void)
|
||||
{
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
on(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int
|
||||
off(int keep_radio_on)
|
||||
{
|
||||
return keep_radio_on;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static unsigned short
|
||||
cca(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
init(void)
|
||||
{
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
const struct rdc_driver stub_rdc_driver = {
|
||||
"stub-rdc",
|
||||
init,
|
||||
send,
|
||||
send_list,
|
||||
input,
|
||||
on,
|
||||
off,
|
||||
cca,
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
183
examples/cc2538dk/timer-test.c
Normal file
183
examples/cc2538dk/timer-test.c
Normal file
|
|
@ -0,0 +1,183 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-examples
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-timers cc2538dk Timer Test Project
|
||||
*
|
||||
* This example tests the correct functionality of clocks and timers.
|
||||
*
|
||||
* More specifically, it tests clock_seconds, rtimers, etimers and
|
||||
* clock_delay_usec.
|
||||
*
|
||||
* This is largely-based on the same example of the cc2530 port.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Tests related to clocks and timers
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "sys/clock.h"
|
||||
#include "sys/rtimer.h"
|
||||
#include "dev/leds.h"
|
||||
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define TIMER_TEST_CONF_TEST_CLOCK_DELAY_USEC 1
|
||||
#define TIMER_TEST_CONF_TEST_RTIMER 1
|
||||
#define TIMER_TEST_CONF_TEST_ETIMER 1
|
||||
#define TIMER_TEST_CONF_TEST_CLOCK_SECONDS 1
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct etimer et;
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_CLOCK_DELAY_USEC
|
||||
static rtimer_clock_t start_count, end_count, diff;
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_CLOCK_SECONDS
|
||||
static unsigned long sec;
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_ETIMER
|
||||
static clock_time_t count;
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_RTIMER
|
||||
static struct rtimer rt;
|
||||
rtimer_clock_t rt_now, rt_for;
|
||||
static clock_time_t ct;
|
||||
#endif
|
||||
|
||||
static uint8_t i;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(timer_test_process, "Timer test process");
|
||||
AUTOSTART_PROCESSES(&timer_test_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#if TIMER_TEST_CONF_TEST_RTIMER
|
||||
void
|
||||
rt_callback(struct rtimer *t, void *ptr)
|
||||
{
|
||||
rt_now = RTIMER_NOW();
|
||||
ct = clock_time();
|
||||
printf("Task called at %lu (clock = %lu)\n", rt_now, ct);
|
||||
}
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(timer_test_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
|
||||
etimer_set(&et, 2 * CLOCK_SECOND);
|
||||
|
||||
PROCESS_YIELD();
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_CLOCK_DELAY_USEC
|
||||
printf("-----------------------------------------\n");
|
||||
printf("clock_delay_usec test, (10,000 x i) usec:\n");
|
||||
printf("N.B. clock_delay_usec is more accurate than rtimers\n");
|
||||
i = 1;
|
||||
while(i < 7) {
|
||||
start_count = RTIMER_NOW();
|
||||
clock_delay_usec(10000 * i);
|
||||
end_count = RTIMER_NOW();
|
||||
diff = end_count - start_count;
|
||||
printf("Requested: %u usec, Real: %lu rtimer ticks = ~%lu us\n",
|
||||
10000 * i, diff, diff * 1000000 / RTIMER_SECOND);
|
||||
i++;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_RTIMER
|
||||
printf("-----------------------------------------\n");
|
||||
printf("Rtimer Test, 1 sec (%u rtimer ticks):\n", RTIMER_SECOND);
|
||||
i = 0;
|
||||
while(i < 5) {
|
||||
etimer_set(&et, 2 * CLOCK_SECOND);
|
||||
printf("=======================\n");
|
||||
ct = clock_time();
|
||||
rt_now = RTIMER_NOW();
|
||||
rt_for = rt_now + RTIMER_SECOND;
|
||||
printf("Now=%lu (clock = %lu) - For=%lu\n", rt_now, ct, rt_for);
|
||||
if(rtimer_set(&rt, rt_for, 1, rt_callback, NULL) != RTIMER_OK) {
|
||||
printf("Error setting\n");
|
||||
}
|
||||
|
||||
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
||||
i++;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_ETIMER
|
||||
printf("-----------------------------------------\n");
|
||||
printf("Clock tick and etimer test, 1 sec (%u clock ticks):\n",
|
||||
CLOCK_SECOND);
|
||||
i = 0;
|
||||
while(i < 10) {
|
||||
etimer_set(&et, CLOCK_SECOND);
|
||||
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
||||
etimer_reset(&et);
|
||||
|
||||
count = clock_time();
|
||||
printf("%lu ticks\n", count);
|
||||
|
||||
leds_toggle(LEDS_RED);
|
||||
i++;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if TIMER_TEST_CONF_TEST_CLOCK_SECONDS
|
||||
printf("-----------------------------------------\n");
|
||||
printf("Clock seconds test (5s):\n");
|
||||
i = 0;
|
||||
while(i < 10) {
|
||||
etimer_set(&et, 5 * CLOCK_SECOND);
|
||||
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
|
||||
etimer_reset(&et);
|
||||
|
||||
sec = clock_seconds();
|
||||
printf("%lu seconds\n", sec);
|
||||
|
||||
leds_toggle(LEDS_GREEN);
|
||||
i++;
|
||||
}
|
||||
#endif
|
||||
|
||||
printf("Done!\n");
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
10
examples/cc2538dk/udp-ipv6-echo-server/Makefile
Normal file
10
examples/cc2538dk/udp-ipv6-echo-server/Makefile
Normal file
|
|
@ -0,0 +1,10 @@
|
|||
UIP_CONF_IPV6=1
|
||||
UIP_CONF_RPL=1
|
||||
|
||||
CONTIKI_PROJECT = udp-echo-server
|
||||
|
||||
all: $(CONTIKI_PROJECT)
|
||||
|
||||
CONTIKI = ../../..
|
||||
|
||||
include $(CONTIKI)/Makefile.include
|
||||
1
examples/cc2538dk/udp-ipv6-echo-server/Makefile.target
Normal file
1
examples/cc2538dk/udp-ipv6-echo-server/Makefile.target
Normal file
|
|
@ -0,0 +1 @@
|
|||
TARGET = cc2538dk
|
||||
113
examples/cc2538dk/udp-ipv6-echo-server/udp-echo-server.c
Normal file
113
examples/cc2538dk/udp-ipv6-echo-server/udp-echo-server.c
Normal file
|
|
@ -0,0 +1,113 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/** \addtogroup cc2538-examples
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-echo-server cc2538dk UDP Echo Server Project
|
||||
*
|
||||
* Tests that a node can correctly join an RPL network and also tests UDP
|
||||
* functionality
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* An example of a simple UDP echo server for the cc2538dk platform
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "contiki-lib.h"
|
||||
#include "contiki-net.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
#define DEBUG DEBUG_PRINT
|
||||
#include "net/uip-debug.h"
|
||||
#include "dev/watchdog.h"
|
||||
#include "dev/leds.h"
|
||||
#include "net/rpl/rpl.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define UIP_IP_BUF ((struct uip_ip_hdr *)&uip_buf[UIP_LLH_LEN])
|
||||
#define UIP_UDP_BUF ((struct uip_udp_hdr *)&uip_buf[uip_l2_l3_hdr_len])
|
||||
|
||||
#define MAX_PAYLOAD_LEN 120
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static struct uip_udp_conn *server_conn;
|
||||
static char buf[MAX_PAYLOAD_LEN];
|
||||
static uint16_t len;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS(udp_echo_server_process, "UDP echo server process");
|
||||
AUTOSTART_PROCESSES(&udp_echo_server_process);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
tcpip_handler(void)
|
||||
{
|
||||
memset(buf, 0, MAX_PAYLOAD_LEN);
|
||||
if(uip_newdata()) {
|
||||
leds_on(LEDS_RED);
|
||||
len = uip_datalen();
|
||||
memcpy(buf, uip_appdata, len);
|
||||
PRINTF("%u bytes from [", len);
|
||||
PRINT6ADDR(&UIP_IP_BUF->srcipaddr);
|
||||
PRINTF("]:%u\n", UIP_HTONS(UIP_UDP_BUF->srcport));
|
||||
uip_ipaddr_copy(&server_conn->ripaddr, &UIP_IP_BUF->srcipaddr);
|
||||
server_conn->rport = UIP_UDP_BUF->srcport;
|
||||
|
||||
uip_udp_packet_send(server_conn, buf, len);
|
||||
uip_create_unspecified(&server_conn->ripaddr);
|
||||
server_conn->rport = 0;
|
||||
}
|
||||
leds_off(LEDS_RED);
|
||||
return;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
PROCESS_THREAD(udp_echo_server_process, ev, data)
|
||||
{
|
||||
|
||||
PROCESS_BEGIN();
|
||||
PRINTF("Starting UDP echo server\n");
|
||||
|
||||
server_conn = udp_new(NULL, UIP_HTONS(0), NULL);
|
||||
udp_bind(server_conn, UIP_HTONS(3000));
|
||||
|
||||
PRINTF("Listen port: 3000, TTL=%u\n", server_conn->ttl);
|
||||
|
||||
while(1) {
|
||||
PROCESS_YIELD();
|
||||
if(ev == tcpip_event) {
|
||||
tcpip_handler();
|
||||
}
|
||||
}
|
||||
|
||||
PROCESS_END();
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
32
platform/cc2538dk/Makefile.cc2538dk
Normal file
32
platform/cc2538dk/Makefile.cc2538dk
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
# cc2538dk platform makefile
|
||||
|
||||
ifndef CONTIKI
|
||||
$(error CONTIKI not defined! You must specify where CONTIKI resides!)
|
||||
endif
|
||||
|
||||
CONTIKI_TARGET_DIRS = . dev
|
||||
|
||||
CONTIKI_TARGET_SOURCEFILES += leds.c leds-arch.c
|
||||
CONTIKI_TARGET_SOURCEFILES += contiki-main.c
|
||||
CONTIKI_TARGET_SOURCEFILES += sensors.c smartrf-sensors.c button-sensor.c
|
||||
|
||||
TARGET_START_SOURCEFILES += startup-gcc.c
|
||||
TARGET_STARTFILES = ${addprefix $(OBJECTDIR)/,${call oname, $(TARGET_START_SOURCEFILES)}}
|
||||
|
||||
CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
|
||||
|
||||
CLEAN += *.cc2538dk
|
||||
|
||||
### Unless the example dictates otherwise, build with code size optimisations
|
||||
ifndef SMALL
|
||||
SMALL = 1
|
||||
endif
|
||||
|
||||
### If the prject's Makefile specified IPv6, the pre-processor needs to know
|
||||
ifeq ($(UIP_CONF_IPV6),1)
|
||||
CFLAGS += -DUIP_CONF_IPV6=1
|
||||
endif
|
||||
|
||||
### Define the CPU directory
|
||||
CONTIKI_CPU=$(CONTIKI)/cpu/cc2538
|
||||
include $(CONTIKI_CPU)/Makefile.cc2538
|
||||
460
platform/cc2538dk/README.md
Normal file
460
platform/cc2538dk/README.md
Normal file
|
|
@ -0,0 +1,460 @@
|
|||
Getting Started with Contiki for TI CC2538DK
|
||||
============================================
|
||||
|
||||
This guide's aim is to help you start using Contiki for TI's CC2538 Development Kit. By
|
||||
CC2538DK we mean a TI CC2538 Evaluation Module (EM), either standalone and powered by USB or attached to a SmartRF06 Evaluation Board (EB) or Battery Board (BB). The general usage scenario assumes that the EM is attached to a SmartRF06EB and is powered by it.
|
||||
|
||||
This guide assumes that you have basic understanding of how to use the command line and perform basic admin tasks on UNIX family OSs.
|
||||
|
||||
Port Features
|
||||
=============
|
||||
The platform has the following key features:
|
||||
|
||||
* Deep Sleep support with RAM retention for ultra-low energy consumption.
|
||||
* Native USB support (CDC-ACM). SLIP over UART for border routers is no longer a bottleneck.
|
||||
* DMA transfers for increased performance (RAM to/from RF, RAM to/from USB).
|
||||
|
||||
In terms of hardware support, the following drivers have been implemented:
|
||||
|
||||
* CC2538 System-on-Chip:
|
||||
* Standard Cortex M3 peripherals (NVIC, SCB, SysTick)
|
||||
* Sleep Timer (underpins rtimers)
|
||||
* SysTick (underpins the platform clock and Contiki's timers infrastructure)
|
||||
* RF
|
||||
* UART
|
||||
* Watchdog (in watchdog mode)
|
||||
* USB (in CDC-ACM)
|
||||
* uDMA Controller (RAM to/from USB and RAM to/from RF)
|
||||
* Random number generator
|
||||
* Low Power Modes
|
||||
* General-Purpose Timers. NB: GPT0 is in use by the platform code, the remaining GPTs are available for application development.
|
||||
* SmartRF06 EB and BB peripherals
|
||||
* LEDs
|
||||
* Buttons
|
||||
* UART connectivity over the XDS100v3 backchannel (EB only)
|
||||
|
||||
Requirements
|
||||
============
|
||||
To start using Contiki, you will need the following:
|
||||
|
||||
* A toolchain to compile Contiki for the CC2538.
|
||||
* Drivers so that your OS can communicate with your hardware.
|
||||
* Software to upload images to the CC2538.
|
||||
|
||||
Different tasks can be performed under different operating systems. The table below summarises what task can be performed on which OS:
|
||||
|
||||
Windows Linux OS-X
|
||||
Building Contiki Y Y N
|
||||
Node Programming Y Y N
|
||||
Console output
|
||||
(UART) Y Y Y
|
||||
(USB CDC-ACM) Y Y Y
|
||||
Border Routers
|
||||
(UART) N Y Y
|
||||
(USB CDC-ACM) N Y Y
|
||||
Sniffer
|
||||
(UART) N Y Y
|
||||
(USB CDC-ACM) N Y Y
|
||||
|
||||
The platform has been developed and tested under Windows XP, Mac OS X 10.7 and Ubuntu 12.04 and 12.10. The matrix above has been populated based on information for those OSs.
|
||||
|
||||
Install a Toolchain
|
||||
-------------------
|
||||
The toolchain used to build contiki is arm-gcc (Sorcery CodeBench), also used by other arm-based Contiki ports. If you are using Instant Contiki, you will have this pre-installed in your system. To find out if this is the case, try this:
|
||||
|
||||
$ arm-none-eabi-gcc -v
|
||||
Using built-in specs.
|
||||
Target: arm-none-eabi
|
||||
Configured with: /scratch/julian/lite-respin/eabi/src/gcc-4.3/configure
|
||||
...
|
||||
(skip)
|
||||
...
|
||||
Thread model: single
|
||||
gcc version 4.3.2 (Sourcery G++ Lite 2008q3-66)
|
||||
|
||||
If the toolchain is not installed, download and install one of the following two versions:
|
||||
|
||||
* Sourcery Codebench Lite for ARM processors from the URL below. Make sure to select the EABI Release. <http://www.mentor.com/embedded-software/sourcery-tools/sourcery-codebench/editions/lite-edition/>
|
||||
* Alternatively, you can use this older version for Linux. At the time of writing, this is the version used by Contiki's regression tests. <https://sourcery.mentor.com/public/gnu_toolchain/arm-none-eabi/arm-2008q3-66-arm-none-eabi-i686-pc-linux-gnu.tar.bz2>
|
||||
|
||||
The former is newer. The latter has been in use for a longer period of time and the Contiki code has been tested with it more extensively. The CC2538DK port code has been developed and tested with both.
|
||||
|
||||
Drivers
|
||||
-------
|
||||
You will need to install drivers so that your Operating System can communicate with the hardware
|
||||
|
||||
### For the SmartRF06 EB (UART)
|
||||
The SmartRF communicates with the PC with a piece of hardware called the TI XDS100v3 Emulator (from now on simply XDS). This is a combined JTAG/UART interface and is used to program the EM, for debugging and for UART character I/O.
|
||||
|
||||
You will need to install XDS drivers if you want to do anything useful with the CC2538 UART.
|
||||
|
||||
* **For Windows**: Installing [SmartRF Studio][smart-rf-studio] will install the drivers (A beta version is needed, not the one currently distributed on the TI site). Read the [SmartRF User Guide][smart-rf-ug] for more detailed instructions. After driver installation, the XDS will appear as a COM port.
|
||||
* **For Linux**: The XDS is based on an FTDI chip and new Linux kernels provide very good support for FTDI chips. If the kernel module does not kick in automatically, perform the following steps:
|
||||
* Connect the SmartRF to the linux box. Find the device's VID and PID (0403:a6d1 in the output below):
|
||||
|
||||
$ lsusb
|
||||
...
|
||||
Bus 001 Device 002: ID 0403:a6d1 Future Technology Devices International, Ltd
|
||||
...
|
||||
|
||||
|
||||
* As root or with `sudo`, run the command below (if necessary, replace the `vendor` and `product` arguments with the values you got from `lsusb`):
|
||||
|
||||
modprobe ftdi_sio vendor=0x403 product=0xa6d1
|
||||
|
||||
* You may have have to remove package `brltty`, if it's installed.
|
||||
* The board should have enumerated as `/dev/ttyUSB{0,1}`. `ttyUSB1` will be the UART backchannel.
|
||||
* **For OS X**: We need to hack the kernel extension (kext) a little bit:
|
||||
* First, install the FTDI VCP driver from <http://www.ftdichip.com/Drivers/VCP.htm>
|
||||
* Edit `/System/Library/Extensions/FTDIUSBSerialDriver.kext/Contents/Info.plist` with a text editor.
|
||||
* Add the following block somewhere under `IOKitPersonalities`.
|
||||
|
||||
<key>TI_XDS100v3</key>
|
||||
<dict>
|
||||
<key>CFBundleIdentifier</key>
|
||||
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
|
||||
<key>IOClass</key>
|
||||
<string>FTDIUSBSerialDriver</string>
|
||||
<key>IOProviderClass</key>
|
||||
<string>IOUSBInterface</string>
|
||||
<key>bConfigurationValue</key>
|
||||
<integer>1</integer>
|
||||
<key>bInterfaceNumber</key>
|
||||
<integer>1</integer>
|
||||
<key>idProduct</key>
|
||||
<integer>42705</integer>
|
||||
<key>idVendor</key>
|
||||
<integer>1027</integer>
|
||||
</dict>
|
||||
|
||||
* If the kext is loaded at the time you perform this change, you will have to either reload it or reboot the Mac. At the time of writing this guide, reloading the kext would fail with errors so rebooting appears to be the only solution.
|
||||
* After you have rebooted, plug in the SmartRF, turn it on and then load the kext manually:
|
||||
|
||||
sudo kextload /System/Library/Extensions/FTDIUSBSerialDriver.kext
|
||||
|
||||
If everything worked, the XDS will have enumerated as `/dev/tty.usbserial-<serial-number>`
|
||||
|
||||
### For the CC2538EM (USB CDC-ACM)
|
||||
The CC2538 EM's USB Vendor and Product IDs are the following:
|
||||
|
||||
* VID 0x0451
|
||||
* PID 0x16C8
|
||||
|
||||
The implementation in Contiki is pure CDC-ACM: The Linux and OS X kernels know exactly what to do and drivers are not required.
|
||||
|
||||
On windows, you will need to provide a driver:
|
||||
|
||||
* Download this LUFA CDC-ACM driver:
|
||||
<http://code.google.com/p/lufa-lib/source/browse/trunk/Demos/Device/LowLevel/VirtualSerial/LUFA+VirtualSerial.inf>
|
||||
* Adjust the VID and PID near the end with the values at the start of this section.
|
||||
* Next time you get prompted for the driver, include the directory containing the .inf file in the search path and the driver will be installed.
|
||||
|
||||
### Improve Stability on Linux
|
||||
There are some issues under recent Ubuntu versions (e.g. 12.10). The problem manifests itself as frequent connects/disconnects for the first approximately 30 seconds after the device has been connected to the host (Both UART and USB). The reason for this is that, as soon as the device is connected, the modem manager kicks in and starts probing it. To prevent this, we can tell the modem manager to leave this device alone:
|
||||
|
||||
* edit `/lib/udev/rules.d/77-mm-usb-device-blacklist.rules`
|
||||
* Add the following line somewhere:
|
||||
|
||||
ATTRS{idVendor}=="0451", ATTRS{idProduct}=="16c8", ENV{ID_MM_DEVICE_IGNORE}="1"
|
||||
|
||||
* This line will instruct modem-manager to ignore the EM's USB port. To achieve the same for the SmartRF's XDS port, add a similar line but replace `idVendor` and `idProduct` with the XDS' VID/PID: 0403/a6d1.
|
||||
|
||||
* restart the modem-manager process:
|
||||
|
||||
sudo service modemmanager restart
|
||||
|
||||
This will tell modem manager to suppress probing for these VID/PID combinations. Keep in mind that the `blacklist.rules` file may get overwritten by future modem-manager updates and you may have to re-apply the fix in the future.
|
||||
|
||||
### Jumper Settings
|
||||
Be careful with jumper settings on the CC2538 EM. The EM can be powered from the SmartRF or it can be powered from its own USB port.
|
||||
|
||||
* Locate the pair of adjacent jumpers on the EM.
|
||||
* To power the EM from the SmartRF, place the jumper on the inner two pins (the ones closest to the SoC).
|
||||
* To power the EM from its USB, place the jumper on the two pins nearest to the USB port.
|
||||
|
||||
The USB functionality will work on both situations, the jumper only controlls power supply.
|
||||
|
||||
### Device Enumerations
|
||||
For the UART, serial line settings are 115200 8N1, no flow control.
|
||||
|
||||
Once all drivers have been installed correctly:
|
||||
|
||||
On windows, devices will appear as a virtual COM port (applies to both the UART/XDS as well as USB CDC-ACM).
|
||||
|
||||
On Linux and OS X, devices will appear under `/dev/`.
|
||||
|
||||
On OS X:
|
||||
|
||||
* XDS backchannel: `tty.usbserial-<serial number>`
|
||||
* EM in CDC-ACM: `tty.usbmodemf<X><ABC>` (X a letter, ABC a number e.g. `tty.usbmodemfd121`)
|
||||
|
||||
On Linux:
|
||||
|
||||
* XDS backchannel: `ttyUSB1`
|
||||
* EM in CDC-ACM: `ttyACMn` (n=0, 1, ....)
|
||||
|
||||
Software to Program the Nodes
|
||||
-----------------------------
|
||||
On Windows, nodes can be programmed with TI's [ArmProgConsole/SmartRF Flash Programmer][prog-tool]. The README should be self-explanatory. With ArmProgConsole, upload the file with a `.bin` extension.
|
||||
|
||||
On Linux, nodes can be programmed with TI's [UniFlash] tool. With UniFlash, use the file with `.elf` extension.
|
||||
|
||||
The file with a `.cc2538dk` extension is a copy of the `.elf` file.
|
||||
|
||||
Use the Port
|
||||
============
|
||||
The following examples are intended to work off-the-shelf:
|
||||
|
||||
* Examples under `examples/cc2538dk`
|
||||
* Border router: `examples/ipv6/rpl-border-router`
|
||||
* Webserver: `examples/webserver-ipv6`
|
||||
|
||||
We can also use the CoAP example from `examples/er-rest-example/`. However, the example's `Makefile` is slightly problematic at the time of writing this guide. As a workaround, open it and delete this entire block:
|
||||
|
||||
ifneq ($(TARGET), minimal-net)
|
||||
ifneq ($(TARGET), native)
|
||||
ifneq ($(TARGET), econotag)
|
||||
ifneq ($(findstring avr,$(TARGET)), avr)
|
||||
PROJECT_SOURCEFILES += static-routing.c
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
The key is to prevent compilation of `static-routing.c`. If you're curious about more info, see the discussion here:
|
||||
<http://thread.gmane.org/gmane.os.contiki.devel/16543>
|
||||
|
||||
and the related bug report here:
|
||||
<https://github.com/contiki-os/contiki/issues/87>
|
||||
|
||||
Build your First Examples
|
||||
-------------------------
|
||||
It is recommended to start with the `cc2538-demo` and `timer-test` examples under `examples/cc2538dk/`. These are very simple examples which will help you get familiar with the hardware and the environment.
|
||||
|
||||
Strictly speaking, to build them you need to run `make TARGET=cc2538dk`. However, the example directories contain a `Makefile.target` which is automatically included and specifies the correct `TARGET=` argument. Thus, for examples under the `cc2538dk` directory, you can simply run `make`.
|
||||
|
||||
For the `cc2538-demo`, the comments at the top of `cc2538-demo.c` describe in detail what the example does.
|
||||
|
||||
Node IEEE/RIME/IPv6 Addresses
|
||||
-----------------------------
|
||||
|
||||
Nodes will generally autoconfigure their IPv6 address based on their IEEE address. The IEEE address can be read directly from the CC2538 Info Page, or it can be hard-coded. Additionally, the user may specify a 2-byte value at build time, which will be used as the IEEE address' 2 LSBs.
|
||||
|
||||
To configure the IEEE address source location (Info Page or hard-coded), use the `IEEE_ADDR_CONF_HARDCODED` define in contiki-conf.h:
|
||||
|
||||
* 0: Info Page
|
||||
* 1: Hard-coded
|
||||
|
||||
If `IEEE_ADDR_CONF_HARDCODED` is defined as 1, the IEEE address will take its value from the `IEEE_ADDR_CONF_ADDRESS` define.
|
||||
|
||||
Additionally, you can override the IEEE's 2 LSBs, by using the `NODEID` make variable. The value of `NODEID` will become the value of the `IEEE_ADDR_NODE_ID` pre-processor define. If `NODEID` is not defined, `IEEE_ADDR_NODE_ID` will not get defined either. For example:
|
||||
|
||||
make NODEID=0x79ab
|
||||
|
||||
This will result in the 2 last bytes of the IEEE address getting set to 0x79 0xAB
|
||||
|
||||
Note: Some early production devices do not have am IEEE address written on the Info Page. For those devices, using value 0 above will result in a Rime address of all 0xFFs. If your device is in this category, define `IEEE_ADDR_CONF_HARDCODED` to 1 and specify `NODEID` to differentiate between devices.
|
||||
|
||||
### Scripted multi-image builds
|
||||
|
||||
You can build multiple nodes with different `NODEID`s sequentially. The only platform file relying on the value of `NODEID` (or more accurately `IEEE_ADDR_NODE_ID`) is `ieee-addr.c`, which will get recompiled at each build invocation. As a result, the build system can be scripted to build you multiple firmware images, each one with a different MAC address. Bear in mind that, if you choose to do such scripting, you will need to make a copy of each firmware before invoking the next build, since each new image will overwrite the previous one. Thus, for example, you could do something like this:
|
||||
|
||||
for image in 1 2 3 4; do make cc2538-demo NODEID=$image && \
|
||||
cp cc2538-demo.cc2538dk cc2538-demo-$image.cc2538dk; done
|
||||
|
||||
Which would build you `cc2538-demo-1.cc2538dk`, `cc2538-demo-2.cc2538dk` etc
|
||||
|
||||
As discussed above, only `ieee-addr.c` will get recompiled for every build. Thus, if you start relying on the value of `IEEE_ADDR_NODE_ID` in other code modules, this trick will not work off-the-shelf. In a scenario like that, you would have to modify your script to touch those code modules between every build. For instance, if you are using an imaginary `foo.c` which needs to see changes to `NODEID`, the script above could be modified like so:
|
||||
|
||||
for image in 1 2 3 4; do make cc2538-demo NODEID=$image && \
|
||||
cp cc2538-demo.cc2538dk cc2538-demo-$image.cc2538dk && \
|
||||
touch foo.c; done
|
||||
|
||||
|
||||
Build a 6LoWPAN Testbed
|
||||
-----------------------
|
||||
Once you are familiar with the basics, get a mini 6LoWPAN testbed.
|
||||
|
||||
Start by building a border router from `examples/ipv6/rpl-border-router`
|
||||
|
||||
* Turn on debugging output by changing `#define DEBUG DEBUG_NONE` to `#define DEBUG DEBUG_PRINT` in `border-router.c`.
|
||||
* The border router's configuration (`project-conf.h`), sets the maximum size of the uIP buffer (`UIP_CONF_BUFFER_SIZE`). This is a bit restrictive for this platform: we can afford to allocate more memory of we want to. It's not necessary, but feel free to remove the lines below from `project-conf.h`, allowing the platform to use its own default value.
|
||||
|
||||
#ifndef UIP_CONF_BUFFER_SIZE
|
||||
#define UIP_CONF_BUFFER_SIZE 140
|
||||
#endif
|
||||
|
||||
* `make TARGET=cc2538dk`
|
||||
* Flash your device with `border-router.cc2538dk` or `border-router.bin`.
|
||||
* Connect device to Linux or OS X over its XDS port.
|
||||
* `cd $(CONTIKI)/tools`
|
||||
* `make tunslip6`
|
||||
* `sudo $(CONTIKI)/tools/tunslip6 -s /dev/<device> aaaa::1/64`
|
||||
* The router will print its own IPv6 address. Use it below.
|
||||
|
||||
Got configuration message of type P
|
||||
Setting prefix aaaa::
|
||||
created a new RPL dag
|
||||
Server IPv6 addresses:
|
||||
aaaa::212:4b00:89ab:cdef
|
||||
fe80::212:4b00:89ab:cdef
|
||||
|
||||
* `ping6 <address>`
|
||||
* `curl -g "http://[<address-inside-the-brackets>]"` and the border router will serve you a web-page. Try from a browser too.
|
||||
|
||||
Afterwards, build RPL nodes in `examples/cc2538dk/udp-ipv6-echo-server`
|
||||
|
||||
* If you are not reading node MAC addresses from the Info Page, make sure you assign a new MAC address for each node by passing `NODEID=xyz` to the make command line, as discussed in an earlier section.
|
||||
* `make` (or `make NODEID=xyz`). You don't need to specify `TARGET=` as this is saved in `Makefile.target`
|
||||
* Flash device with `udp-echo-server.cc2538dk` or `.bin`.
|
||||
* If you want to see console output, connect the device to a PC over its XDS port. You don't need to do that though, this example will work on 'headless' nodes. This may be a good chance to try out your BB, if you have one.
|
||||
* Repeat for more nodes, each one with a new `NODEID` if necessary.
|
||||
|
||||
More things to play around with
|
||||
|
||||
* Feel free to throw some webservers in the mix. In `examples/webserver-ipv6`, run `make TARGET=cc2538dk NODEID=<value>`
|
||||
* `ping6` and `netcat` the RPL nodes (the echo server listens on UDP 3000): `nc -6u <address> 3000`
|
||||
* Retrieve a webpage from a node. Use `curl` as above, or you can `wget` or you can fire up a browser and navigate to the websever's address.
|
||||
|
||||
Build a Sniffer - Live Traffic Capture with Wireshark
|
||||
-----------------------------------------------------
|
||||
There is a sniffer example in `examples/cc2538dk/sniffer/`
|
||||
|
||||
Diverging from platform defaults, this example configures the UART to use a baud rate of 460800. The reason is that sniffers operating at 115200 are liable to corrupt frames. This is almost certain to occur when sniffing a ContikiMAC-based deployment. See more details on how to configure UART baud rates in the "Advanced Topics" section.
|
||||
|
||||
Once you have built it and flashed your device, download and run `sensniff` on your PC (Linux or OS X). Get it from:
|
||||
<https://github.com/g-oikonomou/sensniff>
|
||||
|
||||
Instructions on what to do with `sensniff` are in its README. Make sure to set the `-b` command line parameter correctly to match the sniffer's UART baud rate. Lastly, bear in mind that Host-to-Peripheral commands will not work with the CC2538 at this stage.
|
||||
|
||||
Mix & Match with CC2530s
|
||||
------------------------
|
||||
Every aspect of the CC2538 port is interoprable with the existing CC2530 port. Same 6LoWPAN prefix, same .15.4 channel and PAN ID etc. Thus, you can throw in CC2530s at will, for as long as you are using NullRDC. For instance, you can have a CC2531 border router with SmartRF06 + CC2538 EMs as RPL nodes. Or you can have a CC2538 border router with SmartRF05 + CC2530EM RPL nodes etc.
|
||||
|
||||
If you want to add CC2530s to the network, make sure you have followed the CC2530 how-to on the main contiki wiki:
|
||||
<https://github.com/contiki-os/contiki/wiki/8051-Based-Platforms>
|
||||
|
||||
Advanced Topics
|
||||
===============
|
||||
The platform's functionality can be customised by tweaking the various configuration directives in `platform/cc2538dk/contiki-conf.h`. Bear in mind that defines specified in `contiki-conf.h` can be over-written by defines specified in `project-conf.h`, which is a file commonly encountered in example directories.
|
||||
|
||||
Thus, if you want to modify the platform's default behaviour, change values in `contiki-conf.h`. If you want to configure custom behaviour for a specific example, modify this example's `project-conf.h`.
|
||||
|
||||
N.B. Some defines in `contiki-conf.h` are not meant to be modified.
|
||||
|
||||
Switching between UART and USB (CDC-ACM)
|
||||
----------------------------------------
|
||||
By default, everything is configured to use the UART (stdio, border router's SLIP, sniffer's output stream). If you want to change this, these are the relevant lines in contiki-conf.h (0: UART, 1: USB):
|
||||
|
||||
#define SLIP_ARCH_CONF_USB 0 /** SLIP over UART by default */
|
||||
#define CC2538_RF_CONF_SNIFFER_USB 0 /** Sniffer out over UART by default */
|
||||
#define DBG_CONF_USB 0 /** All debugging over UART by default */
|
||||
|
||||
You can multiplex things (for instance, SLIP as well as debugging over USB or SLIP over USB but debugging over UART and other combinations).
|
||||
|
||||
UART Baud Rate
|
||||
--------------
|
||||
By default, the CC2538 UART is configured with a baud rate of 115200. It is easy to increase this to 230400 by changing the value of `UART_CONF_BAUD_RATE` in `contiki-conf.h` or `project-conf.h`.
|
||||
|
||||
#define UART_CONF_BAUD_RATE 230400
|
||||
|
||||
Currently, this configuration directive only supports values 115200, 230400 and 460800. Custom baud rates can also be achieved by following the steps below:
|
||||
|
||||
* Configure `UART_CONF_BAUD_RATE` with an unsupported value to prevent it from auto-choosing values for IBRD and FBRD. For instance, in your project-conf.h you can do:
|
||||
|
||||
#define UART_CONF_BAUD_RATE 0
|
||||
|
||||
* Provide custom values for `UART_CONF_IBRD` and `UART_CONF_FBRD` according to the guidelines in the CC2538 User Guide.
|
||||
|
||||
RF and USB DMA
|
||||
--------------
|
||||
Transfers between RAM and the RF and USB will be conducted with DMA. If for whatever reason you wish to disable this, here are the relevant configuration lines.
|
||||
|
||||
#define USB_ARCH_CONF_DMA 1
|
||||
#define CC2538_RF_CONF_TX_USE_DMA 1
|
||||
#define CC2538_RF_CONF_RX_USE_DMA 1
|
||||
|
||||
Low-Power Modes
|
||||
---------------
|
||||
The CC2538 port supports power modes for low energy consumption. The SoC will enter a low power mode as part of the main loop when there are no more events to service.
|
||||
|
||||
LPM support can be disabled in its entirety by setting `LPM_CONF_ENABLE` to 0 in `contiki-conf.h` or `project-conf.h`.
|
||||
|
||||
NOTE: If you are using PG2 version of the Evaluation Module, the SoC will refuse to enter Power Modes 1+ if the debugger is connected and will always enter PM0 regardless of configuration. In order to get real low power mode functionality, make sure the debugger is disconnected. The Battery Board is ideal to test this.
|
||||
|
||||
The Low-Power module uses a simple heuristic to determine the best power mode, depending on anticipated Deep Sleep duration and the state of various peripherals.
|
||||
|
||||
In a nutshell, the algorithm first answers the following questions:
|
||||
|
||||
* Is the RF off?
|
||||
* Is the USB PLL off?
|
||||
* Is the Sleep Timer scheduled to fire an interrupt?
|
||||
|
||||
If the answer to any of the above question is "No", the SoC will enter PM0. If the answer to all questions is "Yes", the SoC will enter one of PMs 0/1/2 depending on the expected Deep Sleep duration and subject to user configuration and application requirements.
|
||||
|
||||
At runtime, the application may enable/disable some Power Modes by making calls to `lpm_set_max_pm()`. For example, to avoid PM2 an application could call `lpm_set_max_pm(1)`. Subsequently, to re-enable PM2 the application would call `lpm_set_max_pm(2)`.
|
||||
|
||||
The LPM module can be configured with a hard maximum permitted power mode.
|
||||
|
||||
#define LPM_CONF_MAX_PM N
|
||||
|
||||
Where N corresponds to the PM number. Supported values are 0, 1, 2. PM3 is not supported. Thus, if the value of the define is 1, the SoC will only ever enter PMs 0 or 1 but never 2 and so on.
|
||||
|
||||
The configuration directive `LPM_CONF_MAX_PM` sets a hard upper boundary. For instance, if `LPM_CONF_MAX_PM` is defined as 1, calls to `lpm_set_max_pm()` can only enable/disable PM1. In this scenario, PM2 can not be enabled at runtime.
|
||||
|
||||
When setting `LPM_CONF_MAX_PM` to 0 or 1, the entire SRAM will be available. Crucially, when value 2 is used the linker will automatically stop using the SoC's SRAM non-retention area, resulting in a total available RAM of 16MB instead of 32MB.
|
||||
|
||||
### LPM and Duty Cycling Driver
|
||||
LPM is highly related to the operations of the Radio Duty Cycling (RDC) driver of the Contiki network stack and will work correctly with ContikiMAC and NullRDC.
|
||||
|
||||
* With ContikiMAC, PMs 0/1/2 are supported subject to user configuration.
|
||||
* When NullRDC is in use, the radio will be always on. As a result, the algorithm discussed above will always choose PM0 and will never attempt to drop to PM1/2.
|
||||
* The LPP driver is also supported but in order to use it, one needs to set `LPM_CONF_MAX_PM` to 0. Setting a higher value will result in "Sleep Forever" situations. This is inefficient and as a result LPP is not recommended for situations requiring low energy consumption. The main reason for this behaviour is a [bug in LPP][lpp-rf-off-bug]. Once this has been resolved, simple modifications to the LPM module will be implemented to support all three PMs under LPP.
|
||||
|
||||
Build headless nodes
|
||||
--------------------
|
||||
It is possible to turn off all character I/O for nodes not connected to a PC. Doing this will entirely disable the UART as well as the USB controller, preserving energy in the long term. The define used to achieve this is (1: Quiet, 0: Normal output):
|
||||
|
||||
#define CC2538_CONF_QUIET 0
|
||||
|
||||
Setting this define to 1 will automatically set the following to 0:
|
||||
|
||||
* `USB_SERIAL_CONF_ENABLE`
|
||||
* `UART_CONF_ENABLE`
|
||||
* `STARTUP_CONF_VERBOSE`
|
||||
|
||||
Further Code Size Reduction
|
||||
---------------------------
|
||||
The build system currently uses optimization level `-O2`. Further code size reduction can be achieved by replacing `-O2` with `-Os` in `cpu/cc2538/Makefile.cc2538`. However, this is not selected as default because images generated with gcc version 4.7.2 (Sourcery CodeBench Lite) are broken for unknown reasons.
|
||||
|
||||
If you are using gcc version 4.3.2 (Sourcery G++ Lite), you should be able to switch to `-Os` without problems.
|
||||
|
||||
Doxygen Documentation
|
||||
=====================
|
||||
This port's code has been documented with doxygen. To build the documentation, navigate to `$(CONTIKI)/doc` and run `make`. This will build the entire contiki documentation and may take a while.
|
||||
|
||||
If you want to build this platform's documentation only and skip the remaining platforms, run this:
|
||||
|
||||
make basedirs="platform/cc2538dk core cpu/cc2538 examples/cc2538dk"
|
||||
|
||||
Once you've built the docs, open `$(CONTIKI)/doc/html/index.html` and enjoy.
|
||||
|
||||
Other Versions of this Guide
|
||||
============================
|
||||
If you prefer this guide in other formats, use the excellent [pandoc] to convert it.
|
||||
|
||||
* **pdf**: `pandoc -s --toc README.md -o README.pdf`
|
||||
* **html**: `pandoc -s --toc README.md -o README.html`
|
||||
|
||||
More Reading
|
||||
============
|
||||
1. [SmartRF06 Evaluation Board User's Guide, (SWRU321)][smart-rf-ug]
|
||||
2. CC2538 System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee®/ZigBee IP® Applications, (SWRU319A)
|
||||
|
||||
[smart-rf-studio]: http://fill.me.soon "SmartRF"
|
||||
[smart-rf-ug]: http://www.ti.com/litv/pdf/swru321 "SmartRF06 Evaluation Board User's Guide"
|
||||
[cc2538-ug]: http://fill.me.soon "CC2538 System-on-Chip User Guide"
|
||||
[prog-tool]: http://fill.me.soon "Programmer Tool - TBA"
|
||||
[uniflash]: http://processors.wiki.ti.com/index.php/Category:CCS_UniFlash "UniFlash"
|
||||
[pandoc]: http://johnmacfarlane.net/pandoc/ "Pandoc - a universal document converter"
|
||||
[lpp-rf-off-bug]: https://github.com/contiki-os/contiki/issues/104 "LPP RF off() bug"
|
||||
402
platform/cc2538dk/contiki-conf.h
Normal file
402
platform/cc2538dk/contiki-conf.h
Normal file
|
|
@ -0,0 +1,402 @@
|
|||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Configuration for the cc2538dk platform
|
||||
*/
|
||||
#ifndef CONTIKI_CONF_H_
|
||||
#define CONTIKI_CONF_H_
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Include Project Specific conf */
|
||||
#ifdef PROJECT_CONF_H
|
||||
#include PROJECT_CONF_H
|
||||
#endif /* PROJECT_CONF_H */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Compiler configuration and platform-specific type definitions
|
||||
*
|
||||
* Those values are not meant to be modified by the user
|
||||
* @{
|
||||
*/
|
||||
#define CLOCK_CONF_SECOND 128
|
||||
|
||||
/* Compiler configurations */
|
||||
#define CCIF
|
||||
#define CLIF
|
||||
|
||||
/* Platform typedefs */
|
||||
typedef uint32_t clock_time_t;
|
||||
typedef uint32_t uip_stats_t;
|
||||
|
||||
/*
|
||||
* rtimer.h typedefs rtimer_clock_t as unsigned short. We need to define
|
||||
* RTIMER_CLOCK_LT to override this
|
||||
*/
|
||||
typedef uint32_t rtimer_clock_t;
|
||||
#define RTIMER_CLOCK_LT(a,b) ((int32_t)((a)-(b)) < 0)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name USB 'core' configuration
|
||||
*
|
||||
* Those values are not meant to be modified by the user, except where stated
|
||||
* otherwise
|
||||
* @{
|
||||
*/
|
||||
#define CTRL_EP_SIZE 8
|
||||
#define USB_EP1_SIZE 32
|
||||
#define USB_EP2_SIZE 64
|
||||
#define USB_EP3_SIZE 64
|
||||
#define USB_ARCH_WRITE_NOTIFY 0
|
||||
|
||||
#ifndef USB_ARCH_CONF_DMA
|
||||
#define USB_ARCH_CONF_DMA 1 /**< Change to Enable/Disable USB DMA */
|
||||
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Generic Configuration directives
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
#ifndef ENERGEST_CONF_ON
|
||||
#define ENERGEST_CONF_ON 0 /**< Energest Module */
|
||||
#endif
|
||||
|
||||
#ifndef STARTUP_CONF_VERBOSE
|
||||
#define STARTUP_CONF_VERBOSE 1 /**< Set to 0 to decrease startup verbosity */
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name uDMA Configuration and channel allocations
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
#define USB_ARCH_CONF_RX_DMA_CHAN 0 /**< USB -> RAM DMA channel */
|
||||
#define USB_ARCH_CONF_TX_DMA_CHAN 1 /**< RAM -> USB DMA channel */
|
||||
#define CC2538_RF_CONF_TX_DMA_CHAN 2 /**< RF -> RAM DMA channel */
|
||||
#define CC2538_RF_CONF_RX_DMA_CHAN 3 /**< RAM -> RF DMA channel */
|
||||
#define UDMA_CONF_MAX_CHANNEL CC2538_RF_CONF_RX_DMA_CHAN
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Character I/O Configuration
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
#ifndef UART_CONF_ENABLE
|
||||
#define UART_CONF_ENABLE 1 /**< Enable/Disable UART I/O */
|
||||
#endif
|
||||
|
||||
#ifndef UART_CONF_BAUD_RATE
|
||||
#define UART_CONF_BAUD_RATE 115200 /**< Default baud rate */
|
||||
#endif
|
||||
|
||||
#ifndef SLIP_ARCH_CONF_USB
|
||||
#define SLIP_ARCH_CONF_USB 0 /**< SLIP over UART by default */
|
||||
#endif
|
||||
#ifndef CC2538_RF_CONF_SNIFFER_USB
|
||||
#define CC2538_RF_CONF_SNIFFER_USB 0 /**< Sniffer out over UART by default */
|
||||
#endif
|
||||
#ifndef DBG_CONF_USB
|
||||
#define DBG_CONF_USB 0 /**< All debugging over UART by default */
|
||||
#endif
|
||||
|
||||
/* Turn off example-provided putchars */
|
||||
#define SLIP_BRIDGE_CONF_NO_PUTCHAR 1
|
||||
#define SLIP_RADIO_CONF_NO_PUTCHAR 1
|
||||
|
||||
/*
|
||||
* Determine whether we need SLIP
|
||||
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
|
||||
* keep using SLIP
|
||||
*/
|
||||
#if defined (UIP_FALLBACK_INTERFACE) || defined (CMD_CONF_OUTPUT)
|
||||
#define SLIP_ARCH_CONF_ENABLED 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* When set, the radio turns off address filtering and sends all captured
|
||||
* frames down a peripheral (UART or USB, depending on the value of
|
||||
* CC2538_RF_CONF_SNIFFER_USB)
|
||||
*/
|
||||
#ifndef CC2538_RF_CONF_SNIFFER
|
||||
#define CC2538_RF_CONF_SNIFFER 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \brief Define this as 1 to build a headless node.
|
||||
*
|
||||
* The UART will not be initialised its clock will be gated, offering some
|
||||
* energy savings. The USB will not be initialised either
|
||||
*/
|
||||
#ifndef CC2538_CONF_QUIET
|
||||
#define CC2538_CONF_QUIET 0
|
||||
#endif
|
||||
|
||||
/* CC2538_CONF_QUIET is hard and overrides all other related defines */
|
||||
#if CC2538_CONF_QUIET
|
||||
#undef USB_SERIAL_CONF_ENABLE
|
||||
#define USB_SERIAL_CONF_ENABLE 0
|
||||
|
||||
#undef UART_CONF_ENABLE
|
||||
#define UART_CONF_ENABLE 0
|
||||
|
||||
#undef STARTUP_CONF_VERBOSE
|
||||
#define STARTUP_CONF_VERBOSE 0
|
||||
|
||||
/* Little sanity check: We can't have quiet sniffers */
|
||||
#if CC2538_RF_CONF_SNIFFER
|
||||
#error "CC2538_RF_CONF_SNIFFER == 1 and CC2538_CONF_QUIET == 1"
|
||||
#error "These values are conflicting. Please set either to 0"
|
||||
#endif
|
||||
#endif /* CC2538_CONF_QUIET */
|
||||
|
||||
/**
|
||||
* \brief Enable the USB core only if we need it
|
||||
*/
|
||||
#ifndef USB_SERIAL_CONF_ENABLE
|
||||
#define USB_SERIAL_CONF_ENABLE \
|
||||
((SLIP_ARCH_CONF_USB & SLIP_ARCH_CONF_ENABLED) | \
|
||||
DBG_CONF_USB | \
|
||||
(CC2538_RF_CONF_SNIFFER & CC2538_RF_CONF_SNIFFER_USB))
|
||||
#endif
|
||||
|
||||
/*
|
||||
* If debugging and SLIP use the same peripheral, this will be 1. Don't modify
|
||||
* this
|
||||
*/
|
||||
#if SLIP_ARCH_CONF_ENABLED
|
||||
#define DBG_CONF_SLIP_MUX (SLIP_ARCH_CONF_USB==DBG_CONF_USB)
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* board.h assumes that basic configuration is done */
|
||||
#include "board.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Network Stack Configuration
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
#ifndef NETSTACK_CONF_NETWORK
|
||||
#if UIP_CONF_IPV6
|
||||
#define NETSTACK_CONF_NETWORK sicslowpan_driver
|
||||
#else
|
||||
#define NETSTACK_CONF_NETWORK rime_driver
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
#endif /* NETSTACK_CONF_NETWORK */
|
||||
|
||||
#ifndef NETSTACK_CONF_MAC
|
||||
#define NETSTACK_CONF_MAC csma_driver
|
||||
#endif
|
||||
|
||||
#ifndef NETSTACK_CONF_RDC
|
||||
#define NETSTACK_CONF_RDC contikimac_driver
|
||||
#endif
|
||||
|
||||
/* Configure NullRDC for when it's selected */
|
||||
#define NULLRDC_802154_AUTOACK 1
|
||||
#define NULLRDC_802154_AUTOACK_HW 1
|
||||
|
||||
/* Configure ContikiMAC for when it's selected */
|
||||
#define CONTIKIMAC_CONF_WITH_CONTIKIMAC_HEADER 0
|
||||
#define WITH_PHASE_OPTIMIZATION 0
|
||||
#define WITH_FAST_SLEEP 1
|
||||
|
||||
#ifndef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
|
||||
#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8
|
||||
#endif
|
||||
|
||||
#ifndef NETSTACK_CONF_FRAMER
|
||||
#define NETSTACK_CONF_FRAMER framer_802154
|
||||
#endif
|
||||
|
||||
#define NETSTACK_CONF_RADIO cc2538_rf_driver
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name LPM configuration
|
||||
* @{
|
||||
*/
|
||||
#ifndef LPM_CONF_ENABLE
|
||||
#define LPM_CONF_ENABLE 1 /**< Set to 0 to disable LPM entirely */
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \brief Maximum PM
|
||||
*
|
||||
* The SoC will never drop to a Power Mode deeper than the one specified here.
|
||||
* 0 for PM0, 1 for PM1 and 2 for PM2
|
||||
*/
|
||||
#ifndef LPM_CONF_MAX_PM
|
||||
#define LPM_CONF_MAX_PM 1
|
||||
#endif
|
||||
|
||||
#ifndef LPM_CONF_STATS
|
||||
#define LPM_CONF_STATS 0 /**< Set to 1 to enable LPM-related stats */
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name IEEE address configuration
|
||||
*
|
||||
* Used to generate our RIME & IPv6 address
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* \brief Location of the IEEE address
|
||||
* 0 => Read from InfoPage,
|
||||
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
|
||||
*/
|
||||
#ifndef IEEE_ADDR_CONF_HARDCODED
|
||||
#define IEEE_ADDR_CONF_HARDCODED 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
|
||||
* is defined as 1
|
||||
*/
|
||||
#ifndef IEEE_ADDR_CONF_ADDRESS
|
||||
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name RF configuration
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
/* RF Config */
|
||||
#define IEEE802154_CONF_PANID 0x5449 /**< Default PAN ID: TI */
|
||||
|
||||
#ifndef CC2538_RF_CONF_CHANNEL
|
||||
#define CC2538_RF_CONF_CHANNEL 25
|
||||
#endif /* CC2538_RF_CONF_CHANNEL */
|
||||
|
||||
#ifndef CC2538_RF_CONF_AUTOACK
|
||||
#define CC2538_RF_CONF_AUTOACK 1 /**< RF H/W generates ACKs */
|
||||
#endif /* CC2538_CONF_AUTOACK */
|
||||
|
||||
#ifndef CC2538_RF_CONF_TX_USE_DMA
|
||||
#define CC2538_RF_CONF_TX_USE_DMA 1 /**< RF TX over DMA */
|
||||
#endif
|
||||
|
||||
#ifndef CC2538_RF_CONF_RX_USE_DMA
|
||||
#define CC2538_RF_CONF_RX_USE_DMA 1 /**< RF RX over DMA */
|
||||
#endif
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name IPv6, RIME and network buffer configuration
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Don't let contiki-default-conf.h decide if we are an IPv6 build */
|
||||
#ifndef UIP_CONF_IPV6
|
||||
#define UIP_CONF_IPV6 0
|
||||
#endif
|
||||
|
||||
#if UIP_CONF_IPV6
|
||||
/* Addresses, Sizes and Interfaces */
|
||||
/* 8-byte addresses here, 2 otherwise */
|
||||
#define RIMEADDR_CONF_SIZE 8
|
||||
#define UIP_CONF_LL_802154 1
|
||||
#define UIP_CONF_LLH_LEN 0
|
||||
#define UIP_CONF_NETIF_MAX_ADDRESSES 3
|
||||
|
||||
/* TCP, UDP, ICMP */
|
||||
#ifndef UIP_CONF_TCP
|
||||
#define UIP_CONF_TCP 1
|
||||
#endif
|
||||
#define UIP_CONF_TCP_MSS 64
|
||||
#define UIP_CONF_UDP 1
|
||||
#define UIP_CONF_UDP_CHECKSUMS 1
|
||||
#define UIP_CONF_ICMP6 1
|
||||
|
||||
/* ND and Routing */
|
||||
#ifndef UIP_CONF_ROUTER
|
||||
#define UIP_CONF_ROUTER 1
|
||||
#endif
|
||||
|
||||
#ifndef UIP_CONF_IPV6_RPL
|
||||
#define UIP_CONF_IPV6_RPL 1
|
||||
#endif
|
||||
|
||||
#define UIP_CONF_ND6_SEND_RA 0
|
||||
#define UIP_CONF_IP_FORWARD 0
|
||||
#define RPL_CONF_STATS 0
|
||||
#define RPL_CONF_MAX_DAG_ENTRIES 1
|
||||
#ifndef RPL_CONF_OF
|
||||
#define RPL_CONF_OF rpl_of_etx
|
||||
#endif
|
||||
|
||||
#define UIP_CONF_ND6_REACHABLE_TIME 600000
|
||||
#define UIP_CONF_ND6_RETRANS_TIMER 10000
|
||||
|
||||
#ifndef UIP_CONF_DS6_NBR_NBU
|
||||
#define UIP_CONF_DS6_NBR_NBU 20
|
||||
#endif
|
||||
#ifndef UIP_CONF_MAX_ROUTES
|
||||
#define UIP_CONF_MAX_ROUTES 20
|
||||
#endif
|
||||
|
||||
/* uIP */
|
||||
#ifndef UIP_CONF_BUFFER_SIZE
|
||||
#define UIP_CONF_BUFFER_SIZE 1300
|
||||
#endif
|
||||
|
||||
#define UIP_CONF_IPV6_QUEUE_PKT 0
|
||||
#define UIP_CONF_IPV6_CHECKS 1
|
||||
#define UIP_CONF_IPV6_REASSEMBLY 0
|
||||
#define UIP_CONF_MAX_LISTENPORTS 8
|
||||
|
||||
/* 6lowpan */
|
||||
#define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06
|
||||
#define SICSLOWPAN_CONF_COMPRESSION_THRESHOLD 63
|
||||
#ifndef SICSLOWPAN_CONF_FRAG
|
||||
#define SICSLOWPAN_CONF_FRAG 1
|
||||
#endif
|
||||
#define SICSLOWPAN_CONF_MAXAGE 8
|
||||
|
||||
/* Define our IPv6 prefixes/contexts here */
|
||||
#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
|
||||
#define SICSLOWPAN_CONF_ADDR_CONTEXT_0 { \
|
||||
addr_contexts[0].prefix[0] = 0xaa; \
|
||||
addr_contexts[0].prefix[1] = 0xaa; \
|
||||
}
|
||||
|
||||
#define MAC_CONF_CHANNEL_CHECK_RATE 8
|
||||
|
||||
#ifndef QUEUEBUF_CONF_NUM
|
||||
#define QUEUEBUF_CONF_NUM 8
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#else /* UIP_CONF_IPV6 */
|
||||
/* Network setup for non-IPv6 (rime). */
|
||||
#define UIP_CONF_IP_FORWARD 1
|
||||
|
||||
#ifndef UIP_CONF_BUFFER_SIZE
|
||||
#define UIP_CONF_BUFFER_SIZE 108
|
||||
#endif
|
||||
|
||||
#define RIME_CONF_NO_POLITE_ANNOUCEMENTS 0
|
||||
|
||||
#ifndef QUEUEBUF_CONF_NUM
|
||||
#define QUEUEBUF_CONF_NUM 8
|
||||
#endif
|
||||
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
#endif /* CONTIKI_CONF_H_ */
|
||||
|
||||
/** @} */
|
||||
226
platform/cc2538dk/contiki-main.c
Normal file
226
platform/cc2538dk/contiki-main.c
Normal file
|
|
@ -0,0 +1,226 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup platform
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538 The cc2538 Development Kit platform
|
||||
*
|
||||
* The cc2538DK is the new platform by Texas Instruments, based on the
|
||||
* cc2530 SoC with an ARM Cortex-M3 core.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Main module for the cc2538dk platform
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/sys-ctrl.h"
|
||||
#include "dev/scb.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "dev/uart.h"
|
||||
#include "dev/watchdog.h"
|
||||
#include "dev/ioc.h"
|
||||
#include "dev/button-sensor.h"
|
||||
#include "dev/serial-line.h"
|
||||
#include "dev/slip.h"
|
||||
#include "dev/cc2538-rf.h"
|
||||
#include "dev/udma.h"
|
||||
#include "usb/usb-serial.h"
|
||||
#include "lib/random.h"
|
||||
#include "net/netstack.h"
|
||||
#include "net/queuebuf.h"
|
||||
#include "net/tcpip.h"
|
||||
#include "net/uip.h"
|
||||
#include "net/mac/frame802154.h"
|
||||
#include "cpu.h"
|
||||
#include "reg.h"
|
||||
#include "ieee-addr.h"
|
||||
#include "lpm.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#if STARTUP_CONF_VERBOSE
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
|
||||
#if UART_CONF_ENABLE
|
||||
#define PUTS(s) puts(s)
|
||||
#else
|
||||
#define PUTS(s)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
fade(unsigned char l)
|
||||
{
|
||||
volatile int i;
|
||||
int k, j;
|
||||
for(k = 0; k < 800; ++k) {
|
||||
j = k > 400 ? 800 - k : k;
|
||||
|
||||
leds_on(l);
|
||||
for(i = 0; i < j; ++i) {
|
||||
asm("nop");
|
||||
}
|
||||
leds_off(l);
|
||||
for(i = 0; i < 400 - j; ++i) {
|
||||
asm("nop");
|
||||
}
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
set_rime_addr()
|
||||
{
|
||||
ieee_addr_cpy_to(&rimeaddr_node_addr.u8[0], RIMEADDR_SIZE);
|
||||
|
||||
#if STARTUP_CONF_VERBOSE
|
||||
{
|
||||
int i;
|
||||
printf("Rime configured with address ");
|
||||
for(i = 0; i < RIMEADDR_SIZE - 1; i++) {
|
||||
printf("%02x:", rimeaddr_node_addr.u8[i]);
|
||||
}
|
||||
printf("%02x\n", rimeaddr_node_addr.u8[i]);
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Main routine for the cc2538dk platform
|
||||
*/
|
||||
int
|
||||
main(void)
|
||||
{
|
||||
nvic_init();
|
||||
sys_ctrl_init();
|
||||
clock_init();
|
||||
lpm_init();
|
||||
rtimer_init();
|
||||
gpio_init();
|
||||
ioc_init();
|
||||
|
||||
leds_init();
|
||||
fade(LEDS_YELLOW);
|
||||
|
||||
process_init();
|
||||
|
||||
watchdog_init();
|
||||
button_sensor_init();
|
||||
|
||||
/*
|
||||
* Character I/O Initialisation.
|
||||
* When the UART receives a character it will call serial_line_input_byte to
|
||||
* notify the core. The same applies for the USB driver.
|
||||
*
|
||||
* If slip-arch is also linked in afterwards (e.g. if we are a border router)
|
||||
* it will overwrite one of the two peripheral input callbacks. Characters
|
||||
* received over the relevant peripheral will be handled by
|
||||
* slip_input_byte instead
|
||||
*/
|
||||
#if UART_CONF_ENABLE
|
||||
uart_init();
|
||||
uart_set_input(serial_line_input_byte);
|
||||
#endif
|
||||
|
||||
#if USB_SERIAL_CONF_ENABLE
|
||||
usb_serial_init();
|
||||
usb_serial_set_input(serial_line_input_byte);
|
||||
#endif
|
||||
|
||||
serial_line_init();
|
||||
|
||||
INTERRUPTS_ENABLE();
|
||||
fade(LEDS_GREEN);
|
||||
|
||||
PUTS(CONTIKI_VERSION_STRING);
|
||||
PUTS(BOARD_STRING);
|
||||
|
||||
PRINTF(" Net: ");
|
||||
PRINTF("%s\n", NETSTACK_NETWORK.name);
|
||||
PRINTF(" MAC: ");
|
||||
PRINTF("%s\n", NETSTACK_MAC.name);
|
||||
PRINTF(" RDC: ");
|
||||
PRINTF("%s\n", NETSTACK_RDC.name);
|
||||
|
||||
/* Initialise the H/W RNG engine. */
|
||||
random_init(0);
|
||||
|
||||
udma_init();
|
||||
|
||||
process_start(&etimer_process, NULL);
|
||||
ctimer_init();
|
||||
|
||||
set_rime_addr();
|
||||
netstack_init();
|
||||
cc2538_rf_set_addr(IEEE802154_PANID);
|
||||
|
||||
#if UIP_CONF_IPV6
|
||||
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
|
||||
queuebuf_init();
|
||||
process_start(&tcpip_process, NULL);
|
||||
#endif /* UIP_CONF_IPV6 */
|
||||
|
||||
process_start(&sensors_process, NULL);
|
||||
|
||||
energest_init();
|
||||
ENERGEST_ON(ENERGEST_TYPE_CPU);
|
||||
|
||||
autostart_start(autostart_processes);
|
||||
|
||||
watchdog_start();
|
||||
fade(LEDS_ORANGE);
|
||||
|
||||
while(1) {
|
||||
uint8_t r;
|
||||
do {
|
||||
/* Reset watchdog and handle polls and events */
|
||||
watchdog_periodic();
|
||||
|
||||
r = process_run();
|
||||
} while(r > 0);
|
||||
|
||||
/* We have serviced all pending events. Enter a Low-Power mode. */
|
||||
lpm_enter();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
190
platform/cc2538dk/dev/board.h
Normal file
190
platform/cc2538dk/dev/board.h
Normal file
|
|
@ -0,0 +1,190 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/** \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-smartrf SmartRF06EB Peripherals
|
||||
*
|
||||
* Defines related to the SmartRF06EB
|
||||
*
|
||||
* This file provides connectivity information on LEDs, Buttons, UART and
|
||||
* other SmartRF peripherals
|
||||
*
|
||||
* Notably, PC0 is used to drive LED1 as well as the USB D+ pullup. Therefore
|
||||
* when USB is enabled, LED1 can not be driven by firmware.
|
||||
*
|
||||
* This file can be used as the basis to configure other platforms using the
|
||||
* cc2538 SoC.
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file with definitions related to the I/O connections on the TI
|
||||
* SmartRF06EB
|
||||
*
|
||||
* \note Do not include this file directly. It gets included by contiki-conf
|
||||
* after all relevant directives have been set.
|
||||
*/
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#include "dev/gpio.h"
|
||||
#include "dev/nvic.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SmartRF LED configuration
|
||||
*
|
||||
* LEDs on the SmartRF06 (EB and BB) are connected as follows:
|
||||
* - LED1 (Red) -> PC0
|
||||
* - LED2 (Yellow) -> PC1
|
||||
* - LED3 (Green) -> PC2
|
||||
* - LED4 (Orange) -> PC3
|
||||
*
|
||||
* LED1 shares the same pin with the USB pullup
|
||||
* @{
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Some files include leds.h before us, so we need to get rid of defaults in
|
||||
* leds.h before we provide correct definitions */
|
||||
#undef LEDS_GREEN
|
||||
#undef LEDS_YELLOW
|
||||
#undef LEDS_RED
|
||||
#undef LEDS_CONF_ALL
|
||||
|
||||
#define LEDS_YELLOW 2 /**< LED2 (Yellow) -> PC1 */
|
||||
#define LEDS_GREEN 4 /**< LED3 (Green) -> PC2 */
|
||||
#define LEDS_ORANGE 8 /**< LED4 (Orange) -> PC3 */
|
||||
|
||||
#if USB_SERIAL_CONF_ENABLE
|
||||
#define LEDS_CONF_ALL 14
|
||||
#define LEDS_RED LEDS_ORANGE
|
||||
#else
|
||||
#define LEDS_CONF_ALL 15
|
||||
#define LEDS_RED 1 /**< LED1 (Red) -> PC0 */
|
||||
#endif
|
||||
|
||||
/* Notify various examples that we have LEDs */
|
||||
#define PLATFORM_HAS_LEDS 1
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name USB configuration
|
||||
*
|
||||
* The USB pullup is driven by PC0 and is shared with LED1
|
||||
*/
|
||||
#define USB_PULLUP_PORT GPIO_C_BASE
|
||||
#define USB_PULLUP_PIN 0
|
||||
#define USB_PULLUP_PIN_MASK (1 << USB_PULLUP_PIN)
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name UART configuration
|
||||
*
|
||||
* On the SmartRF06EB, the UART (XDS back channel) is connected to the
|
||||
* following ports/pins
|
||||
* - RX: PA0
|
||||
* - TX: PA1
|
||||
* - CTS: PB0 (Can only be used with UART1)
|
||||
* - RTS: PD3 (Can only be used with UART1)
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
#define UART_RX_PORT GPIO_A_NUM
|
||||
#define UART_RX_PIN 0
|
||||
|
||||
#define UART_TX_PORT GPIO_A_NUM
|
||||
#define UART_TX_PIN 1
|
||||
|
||||
#define UART_CTS_PORT GPIO_B_NUM
|
||||
#define UART_CTS_PIN 0
|
||||
|
||||
#define UART_RTS_PORT GPIO_D_NUM
|
||||
#define UART_RTS_PIN 3
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** \name SmartRF Button configuration
|
||||
*
|
||||
* Buttons on the SmartRF06 are connected as follows:
|
||||
* - BUTTON_SELECT -> PA3
|
||||
* - BUTTON_LEFT -> PC4
|
||||
* - BUTTON_RIGHT -> PC5
|
||||
* - BUTTON_UP -> PC6
|
||||
* - BUTTON_DOWN -> PC7
|
||||
* @{
|
||||
*/
|
||||
/** BUTTON_SELECT -> PA3 */
|
||||
#define BUTTON_SELECT_PORT_NO GPIO_A_NUM
|
||||
#define BUTTON_SELECT_PIN 3
|
||||
#define BUTTON_SELECT_PORT GPIO_A_BASE
|
||||
#define BUTTON_SELECT_PIN_MASK (1 << BUTTON_SELECT_PIN)
|
||||
#define BUTTON_SELECT_VECTOR NVIC_INT_GPIO_PORT_A
|
||||
|
||||
/** BUTTON_LEFT -> PC4 */
|
||||
#define BUTTON_LEFT_PORT_NO GPIO_C_NUM
|
||||
#define BUTTON_LEFT_PIN 4
|
||||
#define BUTTON_LEFT_PORT GPIO_C_BASE
|
||||
#define BUTTON_LEFT_PIN_MASK (1 << BUTTON_LEFT_PIN)
|
||||
#define BUTTON_LEFT_VECTOR NVIC_INT_GPIO_PORT_C
|
||||
|
||||
/** BUTTON_RIGHT -> PC5 */
|
||||
#define BUTTON_RIGHT_PORT_NO GPIO_C_NUM
|
||||
#define BUTTON_RIGHT_PIN 5
|
||||
#define BUTTON_RIGHT_PORT GPIO_C_BASE
|
||||
#define BUTTON_RIGHT_PIN_MASK (1 << BUTTON_RIGHT_PIN)
|
||||
#define BUTTON_RIGHT_VECTOR NVIC_INT_GPIO_PORT_C
|
||||
|
||||
/** BUTTON_UP -> PC6 */
|
||||
#define BUTTON_UP_PORT_NO GPIO_C_NUM
|
||||
#define BUTTON_UP_PIN 6
|
||||
#define BUTTON_UP_PORT GPIO_C_BASE
|
||||
#define BUTTON_UP_PIN_MASK (1 << BUTTON_UP_PIN)
|
||||
#define BUTTON_UP_VECTOR NVIC_INT_GPIO_PORT_C
|
||||
|
||||
/** BUTTON_DOWN -> PC7 */
|
||||
#define BUTTON_DOWN_PORT_NO GPIO_C_NUM
|
||||
#define BUTTON_DOWN_PIN 7
|
||||
#define BUTTON_DOWN_PORT GPIO_C_BASE
|
||||
#define BUTTON_DOWN_PIN_MASK (1 << BUTTON_DOWN_PIN)
|
||||
#define BUTTON_DOWN_VECTOR NVIC_INT_GPIO_PORT_C
|
||||
|
||||
/* Notify various examples that we have Buttons */
|
||||
#define PLATFORM_HAS_BUTTON 1
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name Device string used on startup
|
||||
* @{
|
||||
*/
|
||||
#define BOARD_STRING "TI SmartRF06 + cc2538EM"
|
||||
/** @} */
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
250
platform/cc2538dk/dev/button-sensor.c
Normal file
250
platform/cc2538dk/dev/button-sensor.c
Normal file
|
|
@ -0,0 +1,250 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538dk-button-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the SmartRF06EB buttons
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/nvic.h"
|
||||
#include "dev/ioc.h"
|
||||
#include "dev/gpio.h"
|
||||
#include "dev/button-sensor.h"
|
||||
#include "sys/timer.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
|
||||
static struct timer debouncetimer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Common initialiser for all buttons
|
||||
* \param port_base GPIO port's register offset
|
||||
* \param pin_mask Pin mask corresponding to the button's pin
|
||||
*/
|
||||
static void
|
||||
config(uint32_t port_base, uint32_t pin_mask)
|
||||
{
|
||||
/* Software controlled */
|
||||
GPIO_SOFTWARE_CONTROL(port_base, pin_mask);
|
||||
|
||||
/* Set pin to input */
|
||||
GPIO_SET_INPUT(port_base, pin_mask);
|
||||
|
||||
/* Enable edge detection */
|
||||
GPIO_DETECT_EDGE(port_base, pin_mask);
|
||||
|
||||
/* Single edge */
|
||||
GPIO_TRIGGER_SINGLE_EDGE(port_base, pin_mask);
|
||||
|
||||
/* Trigger interrupt on Falling edge */
|
||||
GPIO_DETECT_RISING(port_base, pin_mask);
|
||||
|
||||
GPIO_ENABLE_INTERRUPT(port_base, pin_mask);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Callback registered with the GPIO module. Gets fired with a button
|
||||
* port/pin generates an interrupt
|
||||
* \param port The port number that generated the interrupt
|
||||
* \param pin The pin number that generated the interrupt. This is the pin
|
||||
* absolute number (i.e. 0, 1, ..., 7), not a mask
|
||||
*/
|
||||
static void
|
||||
btn_callback(uint8_t port, uint8_t pin)
|
||||
{
|
||||
if(!timer_expired(&debouncetimer)) {
|
||||
return;
|
||||
}
|
||||
|
||||
timer_set(&debouncetimer, CLOCK_SECOND / 8);
|
||||
if(port == GPIO_A_NUM) {
|
||||
sensors_changed(&button_select_sensor);
|
||||
} else if(port == GPIO_C_NUM) {
|
||||
switch(pin) {
|
||||
case BUTTON_LEFT_PIN:
|
||||
sensors_changed(&button_left_sensor);
|
||||
break;
|
||||
case BUTTON_RIGHT_PIN:
|
||||
sensors_changed(&button_right_sensor);
|
||||
break;
|
||||
case BUTTON_UP_PIN:
|
||||
sensors_changed(&button_up_sensor);
|
||||
break;
|
||||
case BUTTON_DOWN_PIN:
|
||||
sensors_changed(&button_down_sensor);
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Init function for the select button.
|
||||
*
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also not required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type ignored
|
||||
* \param value ignored
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_select(int type, int value)
|
||||
{
|
||||
config(BUTTON_SELECT_PORT, BUTTON_SELECT_PIN_MASK);
|
||||
|
||||
ioc_set_over(BUTTON_SELECT_PORT_NO, BUTTON_SELECT_PIN, IOC_OVERRIDE_PUE);
|
||||
|
||||
nvic_interrupt_enable(BUTTON_SELECT_VECTOR);
|
||||
|
||||
gpio_register_callback(btn_callback, BUTTON_SELECT_PORT_NO,
|
||||
BUTTON_SELECT_PIN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Init function for the left button.
|
||||
*
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also not required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type ignored
|
||||
* \param value ignored
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_left(int type, int value)
|
||||
{
|
||||
config(BUTTON_LEFT_PORT, BUTTON_LEFT_PIN_MASK);
|
||||
|
||||
ioc_set_over(BUTTON_LEFT_PORT_NO, BUTTON_LEFT_PIN, IOC_OVERRIDE_PUE);
|
||||
|
||||
nvic_interrupt_enable(BUTTON_LEFT_VECTOR);
|
||||
|
||||
gpio_register_callback(btn_callback, BUTTON_LEFT_PORT_NO,
|
||||
BUTTON_LEFT_PIN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Init function for the right button.
|
||||
*
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also not required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type ignored
|
||||
* \param value ignored
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_right(int type, int value)
|
||||
{
|
||||
config(BUTTON_RIGHT_PORT, BUTTON_RIGHT_PIN_MASK);
|
||||
|
||||
ioc_set_over(BUTTON_RIGHT_PORT_NO, BUTTON_RIGHT_PIN, IOC_OVERRIDE_PUE);
|
||||
|
||||
nvic_interrupt_enable(BUTTON_RIGHT_VECTOR);
|
||||
|
||||
gpio_register_callback(btn_callback, BUTTON_RIGHT_PORT_NO,
|
||||
BUTTON_RIGHT_PIN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Init function for the up button.
|
||||
*
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also not required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type ignored
|
||||
* \param value ignored
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_up(int type, int value)
|
||||
{
|
||||
config(BUTTON_UP_PORT, BUTTON_UP_PIN_MASK);
|
||||
|
||||
ioc_set_over(BUTTON_UP_PORT_NO, BUTTON_UP_PIN, IOC_OVERRIDE_PUE);
|
||||
|
||||
nvic_interrupt_enable(BUTTON_UP_VECTOR);
|
||||
|
||||
gpio_register_callback(btn_callback, BUTTON_UP_PORT_NO,
|
||||
BUTTON_UP_PIN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Init function for the down button.
|
||||
*
|
||||
* Parameters are ignored. They have been included because the prototype is
|
||||
* dictated by the core sensor api. The return value is also not required by
|
||||
* the API but otherwise ignored.
|
||||
*
|
||||
* \param type ignored
|
||||
* \param value ignored
|
||||
* \return ignored
|
||||
*/
|
||||
static int
|
||||
config_down(int type, int value)
|
||||
{
|
||||
config(BUTTON_DOWN_PORT, BUTTON_DOWN_PIN_MASK);
|
||||
|
||||
ioc_set_over(BUTTON_DOWN_PORT_NO, BUTTON_DOWN_PIN, IOC_OVERRIDE_PUE);
|
||||
|
||||
nvic_interrupt_enable(BUTTON_DOWN_VECTOR);
|
||||
|
||||
gpio_register_callback(btn_callback, BUTTON_DOWN_PORT_NO,
|
||||
BUTTON_DOWN_PIN);
|
||||
return 1;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
button_sensor_init()
|
||||
{
|
||||
timer_set(&debouncetimer, 0);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(button_select_sensor, BUTTON_SENSOR, NULL, config_select, NULL);
|
||||
SENSORS_SENSOR(button_left_sensor, BUTTON_SENSOR, NULL, config_left, NULL);
|
||||
SENSORS_SENSOR(button_right_sensor, BUTTON_SENSOR, NULL, config_right, NULL);
|
||||
SENSORS_SENSOR(button_up_sensor, BUTTON_SENSOR, NULL, config_up, NULL);
|
||||
SENSORS_SENSOR(button_down_sensor, BUTTON_SENSOR, NULL, config_down, NULL);
|
||||
|
||||
/** @} */
|
||||
66
platform/cc2538dk/dev/button-sensor.h
Normal file
66
platform/cc2538dk/dev/button-sensor.h
Normal file
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-smartrf-sensors
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538dk-button-sensor cc2538dk Button Driver
|
||||
*
|
||||
* Driver for the SmartRF06EB buttons
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the cc2538dk Button Driver
|
||||
*/
|
||||
#ifndef BUTTON_SENSOR_H_
|
||||
#define BUTTON_SENSOR_H_
|
||||
|
||||
#include "lib/sensors.h"
|
||||
#include "dev/gpio.h"
|
||||
|
||||
#define BUTTON_SENSOR "Button"
|
||||
|
||||
#define button_sensor button_select_sensor
|
||||
extern const struct sensors_sensor button_select_sensor;
|
||||
extern const struct sensors_sensor button_left_sensor;
|
||||
extern const struct sensors_sensor button_right_sensor;
|
||||
extern const struct sensors_sensor button_up_sensor;
|
||||
extern const struct sensors_sensor button_down_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* BUTTON_SENSOR_H_ */
|
||||
|
||||
/** \brief Common initialiser for all SmartRF Buttons */
|
||||
void button_sensor_init();
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
73
platform/cc2538dk/dev/leds-arch.c
Normal file
73
platform/cc2538dk/dev/leds-arch.c
Normal file
|
|
@ -0,0 +1,73 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-smartrf
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538dk-leds SmartRF06EB LED driver
|
||||
*
|
||||
* LED driver implementation for the TI SmartRF06EB + cc2538EM
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* LED driver implementation for the TI SmartRF06EB + cc2538EM
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "reg.h"
|
||||
#include "dev/leds.h"
|
||||
#include "dev/gpio.h"
|
||||
|
||||
#define LEDS_GPIO_DATA_MASK (LEDS_ALL << 2)
|
||||
#define LEDS_GPIO_PIN_MASK LEDS_ALL
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
leds_arch_init(void)
|
||||
{
|
||||
GPIO_SET_OUTPUT(GPIO_C_BASE, LEDS_GPIO_PIN_MASK);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
unsigned char
|
||||
leds_arch_get(void)
|
||||
{
|
||||
return REG((GPIO_C_BASE | GPIO_DATA) + LEDS_GPIO_DATA_MASK);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
leds_arch_set(unsigned char leds)
|
||||
{
|
||||
REG((GPIO_C_BASE | GPIO_DATA) + LEDS_GPIO_DATA_MASK) = leds;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
55
platform/cc2538dk/dev/smartrf-sensors.c
Normal file
55
platform/cc2538dk/dev/smartrf-sensors.c
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
/*
|
||||
* Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538-smartrf
|
||||
* @{
|
||||
*
|
||||
* \defgroup cc2538-smartrf-sensors SmartRF06EB Sensors
|
||||
*
|
||||
* Generic module controlling sensors on the SmartRF06EB
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Implementation of a generic module controlling SmartRF06EB sensors
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "dev/button-sensor.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
/** \brief Exports a global symbol to be used by the sensor API */
|
||||
SENSORS(&button_select_sensor, &button_left_sensor, &button_right_sensor,
|
||||
&button_up_sensor, &button_down_sensor);
|
||||
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
323
platform/cc2538dk/startup-gcc.c
Normal file
323
platform/cc2538dk/startup-gcc.c
Normal file
|
|
@ -0,0 +1,323 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
*
|
||||
* Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* Neither the name of Texas Instruments Incorporated nor the names of
|
||||
* its contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/**
|
||||
* \addtogroup cc2538
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Startup code for the cc2538dk platform, to be used when building with gcc
|
||||
*/
|
||||
#include "contiki.h"
|
||||
#include "reg.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define FLASH_START_ADDR 0x00200000
|
||||
#define BOOTLOADER_BACKDOOR_DISABLE 0xEFFFFFFF
|
||||
#define SYS_CTRL_EMUOVR 0x400D20B4
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern int main(void);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* System handlers provided here */
|
||||
void reset_handler(void);
|
||||
void nmi_handler(void);
|
||||
void default_handler(void);
|
||||
|
||||
/* System Handler and ISR prototypes implemented elsewhere */
|
||||
void clock_isr(void); /* SysTick Handler */
|
||||
void gpio_port_a_isr(void);
|
||||
void gpio_port_b_isr(void);
|
||||
void gpio_port_c_isr(void);
|
||||
void gpio_port_d_isr(void);
|
||||
void rtimer_isr(void);
|
||||
void cc2538_rf_rx_tx_isr(void);
|
||||
void cc2538_rf_err_isr(void);
|
||||
void udma_isr(void);
|
||||
void udma_err_isr(void);
|
||||
|
||||
/* Link in the USB ISR only if USB is enabled */
|
||||
#if USB_SERIAL_CONF_ENABLE
|
||||
void usb_isr(void);
|
||||
#else
|
||||
#define usb_isr default_handler
|
||||
#endif
|
||||
|
||||
/* Likewise for the UART ISR */
|
||||
#if UART_CONF_ENABLE
|
||||
void uart_isr(void);
|
||||
#else
|
||||
#define uart_isr default_handler
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Allocate stack space */
|
||||
static unsigned long stack[512];
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Customer Configuration Area in the Lock Page
|
||||
* Holds Image Vector table address (bytes 2012 - 2015) and
|
||||
* Image Valid bytes (bytes 2008 -2011)
|
||||
*/
|
||||
typedef struct {
|
||||
unsigned long bootldr_cfg;
|
||||
unsigned long image_valid;
|
||||
unsigned long image_vector_addr;
|
||||
} lock_page_cca_t;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
__attribute__ ((section(".flashcca"), used))
|
||||
const lock_page_cca_t __cca = {
|
||||
BOOTLOADER_BACKDOOR_DISABLE, /* Bootloader backdoor disabled */
|
||||
0, /* Image valid bytes */
|
||||
FLASH_START_ADDR /* Vector table located at the start of flash */
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
__attribute__ ((section(".vectors"), used))
|
||||
void(*const vectors[])(void) =
|
||||
{
|
||||
(void (*)(void))((unsigned long)stack + sizeof(stack)), /* Stack pointer */
|
||||
reset_handler, /* Reset handler */
|
||||
nmi_handler, /* The NMI handler */
|
||||
default_handler, /* The hard fault handler */
|
||||
default_handler, /* 4 The MPU fault handler */
|
||||
default_handler, /* 5 The bus fault handler */
|
||||
default_handler, /* 6 The usage fault handler */
|
||||
0, /* 7 Reserved */
|
||||
0, /* 8 Reserved */
|
||||
0, /* 9 Reserved */
|
||||
0, /* 10 Reserved */
|
||||
default_handler, /* 11 SVCall handler */
|
||||
default_handler, /* 12 Debug monitor handler */
|
||||
0, /* 13 Reserved */
|
||||
default_handler, /* 14 The PendSV handler */
|
||||
clock_isr, /* 15 The SysTick handler */
|
||||
gpio_port_a_isr, /* 16 GPIO Port A */
|
||||
gpio_port_b_isr, /* 17 GPIO Port B */
|
||||
gpio_port_c_isr, /* 18 GPIO Port C */
|
||||
gpio_port_d_isr, /* 19 GPIO Port D */
|
||||
0, /* 20 none */
|
||||
uart_isr, /* 21 UART0 Rx and Tx */
|
||||
default_handler, /* 22 UART1 Rx and Tx */
|
||||
default_handler, /* 23 SSI0 Rx and Tx */
|
||||
default_handler, /* 24 I2C Master and Slave */
|
||||
0, /* 25 Reserved */
|
||||
0, /* 26 Reserved */
|
||||
0, /* 27 Reserved */
|
||||
0, /* 28 Reserved */
|
||||
0, /* 29 Reserved */
|
||||
default_handler, /* 30 ADC Sequence 0 */
|
||||
0, /* 31 Reserved */
|
||||
0, /* 32 Reserved */
|
||||
0, /* 33 Reserved */
|
||||
default_handler, /* 34 Watchdog timer, timer 0 */
|
||||
default_handler, /* 35 Timer 0 subtimer A */
|
||||
default_handler, /* 36 Timer 0 subtimer B */
|
||||
default_handler, /* 37 Timer 1 subtimer A */
|
||||
default_handler, /* 38 Timer 1 subtimer B */
|
||||
default_handler, /* 39 Timer 2 subtimer A */
|
||||
default_handler, /* 40 Timer 2 subtimer B */
|
||||
default_handler, /* 41 Analog Comparator 0 */
|
||||
default_handler, /* 42 RFCore Rx/Tx (Alternate) */
|
||||
default_handler, /* 43 RFCore Error (Alternate) */
|
||||
default_handler, /* 44 System Control */
|
||||
default_handler, /* 45 FLASH Control */
|
||||
default_handler, /* 46 AES (Alternate) */
|
||||
default_handler, /* 47 PKA (Alternate) */
|
||||
default_handler, /* 48 SM Timer (Alternate) */
|
||||
default_handler, /* 49 MacTimer (Alternate) */
|
||||
default_handler, /* 50 SSI1 Rx and Tx */
|
||||
default_handler, /* 51 Timer 3 subtimer A */
|
||||
default_handler, /* 52 Timer 3 subtimer B */
|
||||
0, /* 53 Reserved */
|
||||
0, /* 54 Reserved */
|
||||
0, /* 55 Reserved */
|
||||
0, /* 56 Reserved */
|
||||
0, /* 57 Reserved */
|
||||
0, /* 58 Reserved */
|
||||
0, /* 59 Reserved */
|
||||
0, /* 60 Reserved */
|
||||
0, /* 61 Reserved */
|
||||
udma_isr, /* 62 uDMA */
|
||||
udma_err_isr, /* 63 uDMA Error */
|
||||
0, /* 64 64-155 are not in use */
|
||||
0, /* 65 */
|
||||
0, /* 66 */
|
||||
0, /* 67 */
|
||||
0, /* 68 */
|
||||
0, /* 69 */
|
||||
0, /* 70 */
|
||||
0, /* 71 */
|
||||
0, /* 72 */
|
||||
0, /* 73 */
|
||||
0, /* 74 */
|
||||
0, /* 75 */
|
||||
0, /* 76 */
|
||||
0, /* 77 */
|
||||
0, /* 78 */
|
||||
0, /* 79 */
|
||||
0, /* 80 */
|
||||
0, /* 81 */
|
||||
0, /* 82 */
|
||||
0, /* 83 */
|
||||
0, /* 84 */
|
||||
0, /* 85 */
|
||||
0, /* 86 */
|
||||
0, /* 87 */
|
||||
0, /* 88 */
|
||||
0, /* 89 */
|
||||
0, /* 90 */
|
||||
0, /* 91 */
|
||||
0, /* 92 */
|
||||
0, /* 93 */
|
||||
0, /* 94 */
|
||||
0, /* 95 */
|
||||
0, /* 96 */
|
||||
0, /* 97 */
|
||||
0, /* 98 */
|
||||
0, /* 99 */
|
||||
0, /* 100 */
|
||||
0, /* 101 */
|
||||
0, /* 102 */
|
||||
0, /* 103 */
|
||||
0, /* 104 */
|
||||
0, /* 105 */
|
||||
0, /* 106 */
|
||||
0, /* 107 */
|
||||
0, /* 108 */
|
||||
0, /* 109 */
|
||||
0, /* 110 */
|
||||
0, /* 111 */
|
||||
0, /* 112 */
|
||||
0, /* 113 */
|
||||
0, /* 114 */
|
||||
0, /* 115 */
|
||||
0, /* 116 */
|
||||
0, /* 117 */
|
||||
0, /* 118 */
|
||||
0, /* 119 */
|
||||
0, /* 120 */
|
||||
0, /* 121 */
|
||||
0, /* 122 */
|
||||
0, /* 123 */
|
||||
0, /* 124 */
|
||||
0, /* 125 */
|
||||
0, /* 126 */
|
||||
0, /* 127 */
|
||||
0, /* 128 */
|
||||
0, /* 129 */
|
||||
0, /* 130 */
|
||||
0, /* 131 */
|
||||
0, /* 132 */
|
||||
0, /* 133 */
|
||||
0, /* 134 */
|
||||
0, /* 135 */
|
||||
0, /* 136 */
|
||||
0, /* 137 */
|
||||
0, /* 138 */
|
||||
0, /* 139 */
|
||||
0, /* 140 */
|
||||
0, /* 141 */
|
||||
0, /* 142 */
|
||||
0, /* 143 */
|
||||
0, /* 144 */
|
||||
0, /* 145 */
|
||||
0, /* 146 */
|
||||
0, /* 147 */
|
||||
0, /* 148 */
|
||||
0, /* 149 */
|
||||
0, /* 150 */
|
||||
0, /* 151 */
|
||||
0, /* 152 */
|
||||
0, /* 153 */
|
||||
0, /* 154 */
|
||||
0, /* 155 */
|
||||
usb_isr, /* 156 USB */
|
||||
cc2538_rf_rx_tx_isr, /* 157 RFCORE RX/TX */
|
||||
cc2538_rf_err_isr, /* 158 RFCORE Error */
|
||||
default_handler, /* 159 AES */
|
||||
default_handler, /* 160 PKA */
|
||||
rtimer_isr, /* 161 SM Timer */
|
||||
default_handler, /* 162 MACTimer */
|
||||
};
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Linker constructs indicating .data and .bss segment locations */
|
||||
extern unsigned long _etext;
|
||||
extern unsigned long _data;
|
||||
extern unsigned long _edata;
|
||||
extern unsigned long _bss;
|
||||
extern unsigned long _ebss;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Weak interrupt handlers. */
|
||||
void
|
||||
nmi_handler(void)
|
||||
{
|
||||
reset_handler();
|
||||
while(1);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
default_handler(void)
|
||||
{
|
||||
while(1);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
void
|
||||
reset_handler(void)
|
||||
{
|
||||
unsigned long *pul_src, *pul_dst;
|
||||
|
||||
REG(SYS_CTRL_EMUOVR) = 0xFF;
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM. */
|
||||
pul_src = &_etext;
|
||||
|
||||
for(pul_dst = &_data; pul_dst < &_edata;) {
|
||||
*pul_dst++ = *pul_src++;
|
||||
}
|
||||
|
||||
/* Zero-fill the bss segment. */
|
||||
__asm(" ldr r0, =_bss\n"
|
||||
" ldr r1, =_ebss\n"
|
||||
" mov r2, #0\n"
|
||||
" .thumb_func\n"
|
||||
"zero_loop:\n"
|
||||
" cmp r0, r1\n"
|
||||
" it lt\n"
|
||||
" strlt r2, [r0], #4\n" " blt zero_loop");
|
||||
|
||||
/* call the application's entry point. */
|
||||
main();
|
||||
|
||||
/* End here if main () returns */
|
||||
while(1);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
/** @} */
|
||||
Loading…
Reference in a new issue