CC2520: Added offset to calculate correct RSSI value
This commit is contained in:
Sumankumar Panchal
parent
6947fc7381
commit
25dea7264a
|
|
@ -55,12 +55,19 @@
|
|||
#define FOOTER1_CRC_OK 0x80
|
||||
#define FOOTER1_CORRELATION 0x7f
|
||||
|
||||
#ifdef CC2520_CONF_RSSI_OFFSET
|
||||
#define RSSI_OFFSET CC2520_CONF_RSSI_OFFSET
|
||||
#else /* CC2520_CONF_RSSI_OFFSET */
|
||||
/* The RSSI_OFFSET is approximate 76 (see CC2520 specification) */
|
||||
#define RSSI_OFFSET 76
|
||||
#endif /* CC2520_CONF_RSSI_OFFSET */
|
||||
|
||||
#include <stdio.h>
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...) do {} while (0)
|
||||
#define PRINTF(...) do {} while(0)
|
||||
#endif
|
||||
|
||||
#if 0 && DEBUG
|
||||
|
|
@ -81,11 +88,11 @@ int cc2520_authority_level_of_sender;
|
|||
|
||||
int cc2520_packets_seen, cc2520_packets_read;
|
||||
|
||||
#define BUSYWAIT_UNTIL(cond, max_time) \
|
||||
do { \
|
||||
rtimer_clock_t t0; \
|
||||
t0 = RTIMER_NOW(); \
|
||||
while(!(cond) && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time))); \
|
||||
#define BUSYWAIT_UNTIL(cond, max_time) \
|
||||
do { \
|
||||
rtimer_clock_t t0; \
|
||||
t0 = RTIMER_NOW(); \
|
||||
while(!(cond) && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time))); \
|
||||
} while(0)
|
||||
|
||||
volatile uint8_t cc2520_sfd_counter;
|
||||
|
|
@ -97,7 +104,6 @@ static volatile uint16_t last_packet_timestamp;
|
|||
PROCESS(cc2520_process, "CC2520 driver");
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
int cc2520_on(void);
|
||||
int cc2520_off(void);
|
||||
|
||||
|
|
@ -141,7 +147,6 @@ get_value(radio_param_t param, radio_value_t *value)
|
|||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
set_value(radio_param_t param, radio_value_t value)
|
||||
{
|
||||
|
|
@ -166,38 +171,35 @@ set_value(radio_param_t param, radio_value_t value)
|
|||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
get_object(radio_param_t param, void *dest, size_t size)
|
||||
{
|
||||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
set_object(radio_param_t param, const void *src, size_t size)
|
||||
{
|
||||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
|
||||
const struct radio_driver cc2520_driver =
|
||||
{
|
||||
cc2520_init,
|
||||
cc2520_prepare,
|
||||
cc2520_transmit,
|
||||
cc2520_send,
|
||||
cc2520_read,
|
||||
/* cc2520_set_channel, */
|
||||
/* detected_energy, */
|
||||
cc2520_cca,
|
||||
cc2520_receiving_packet,
|
||||
pending_packet,
|
||||
cc2520_on,
|
||||
cc2520_off,
|
||||
get_value,
|
||||
set_value,
|
||||
get_object,
|
||||
set_object
|
||||
};
|
||||
{
|
||||
cc2520_init,
|
||||
cc2520_prepare,
|
||||
cc2520_transmit,
|
||||
cc2520_send,
|
||||
cc2520_read,
|
||||
/* cc2520_set_channel, */
|
||||
/* detected_energy, */
|
||||
cc2520_cca,
|
||||
cc2520_receiving_packet,
|
||||
pending_packet,
|
||||
cc2520_on,
|
||||
cc2520_off,
|
||||
get_value,
|
||||
set_value,
|
||||
get_object,
|
||||
set_object
|
||||
};
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
|
|
@ -269,7 +271,9 @@ off(void)
|
|||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define GET_LOCK() locked++
|
||||
static void RELEASE_LOCK(void) {
|
||||
static void
|
||||
RELEASE_LOCK(void)
|
||||
{
|
||||
if(locked == 1) {
|
||||
if(lock_on) {
|
||||
on();
|
||||
|
|
@ -315,7 +319,7 @@ cc2520_init(void)
|
|||
{
|
||||
{
|
||||
int s = splhigh();
|
||||
cc2520_arch_init(); /* Initalize ports and SPI. */
|
||||
cc2520_arch_init(); /* Initalize ports and SPI. */
|
||||
CC2520_DISABLE_FIFOP_INT();
|
||||
CC2520_FIFOP_INT_INIT();
|
||||
splx(s);
|
||||
|
|
@ -339,57 +343,57 @@ cc2520_init(void)
|
|||
/* Change default values as recommended in the data sheet, */
|
||||
/* correlation threshold = 20, RX bandpass filter = 1.3uA.*/
|
||||
|
||||
setreg(CC2520_TXCTRL, 0x94);
|
||||
setreg(CC2520_TXPOWER, 0x13); // Output power 1 dBm
|
||||
setreg(CC2520_TXCTRL, 0x94);
|
||||
setreg(CC2520_TXPOWER, 0x13); /* Output power 1 dBm */
|
||||
|
||||
/*
|
||||
|
||||
valeurs de TXPOWER
|
||||
0x03 -> -18 dBm
|
||||
0x2C -> -7 dBm
|
||||
0x88 -> -4 dBm
|
||||
0x81 -> -2 dBm
|
||||
0x32 -> 0 dBm
|
||||
0x13 -> 1 dBm
|
||||
0x32 -> 0 dBm
|
||||
0x13 -> 1 dBm
|
||||
0xAB -> 2 dBm
|
||||
0xF2 -> 3 dBm
|
||||
0xF7 -> 5 dBm
|
||||
*/
|
||||
setreg(CC2520_CCACTRL0, 0xF8); // CCA treshold -80dBm
|
||||
valeurs de TXPOWER
|
||||
0x03 -> -18 dBm
|
||||
0x2C -> -7 dBm
|
||||
0x88 -> -4 dBm
|
||||
0x81 -> -2 dBm
|
||||
0x32 -> 0 dBm
|
||||
0x13 -> 1 dBm
|
||||
0x32 -> 0 dBm
|
||||
0x13 -> 1 dBm
|
||||
0xAB -> 2 dBm
|
||||
0xF2 -> 3 dBm
|
||||
0xF7 -> 5 dBm
|
||||
*/
|
||||
setreg(CC2520_CCACTRL0, 0xF8); /* CCA treshold -80dBm */
|
||||
|
||||
// Recommended RX settings
|
||||
setreg(CC2520_MDMCTRL0, 0x84); // Controls modem
|
||||
setreg(CC2520_MDMCTRL1, 0x14); // Controls modem
|
||||
setreg(CC2520_RXCTRL, 0x3F); // Adjust currents in RX related analog modules
|
||||
setreg(CC2520_FSCTRL, 0x5A); // Adjust currents in synthesizer.
|
||||
setreg(CC2520_FSCAL1, 0x2B); // Adjust currents in VCO
|
||||
setreg(CC2520_AGCCTRL1, 0x11); // Adjust target value for AGC control loop
|
||||
setreg(CC2520_AGCCTRL2, 0xEB);
|
||||
/* Recommended RX settings */
|
||||
setreg(CC2520_MDMCTRL0, 0x84); /* Controls modem */
|
||||
setreg(CC2520_MDMCTRL1, 0x14); /* Controls modem */
|
||||
setreg(CC2520_RXCTRL, 0x3F); /* Adjust currents in RX related analog modules */
|
||||
setreg(CC2520_FSCTRL, 0x5A); /* Adjust currents in synthesizer. */
|
||||
setreg(CC2520_FSCAL1, 0x2B); /* Adjust currents in VCO */
|
||||
setreg(CC2520_AGCCTRL1, 0x11); /* Adjust target value for AGC control loop */
|
||||
setreg(CC2520_AGCCTRL2, 0xEB);
|
||||
|
||||
// Disable external clock
|
||||
setreg(CC2520_EXTCLOCK, 0x00);
|
||||
/* Disable external clock */
|
||||
setreg(CC2520_EXTCLOCK, 0x00);
|
||||
|
||||
// Tune ADC performance
|
||||
setreg(CC2520_ADCTEST0, 0x10);
|
||||
setreg(CC2520_ADCTEST1, 0x0E);
|
||||
setreg(CC2520_ADCTEST2, 0x03);
|
||||
/* Tune ADC performance */
|
||||
setreg(CC2520_ADCTEST0, 0x10);
|
||||
setreg(CC2520_ADCTEST1, 0x0E);
|
||||
setreg(CC2520_ADCTEST2, 0x03);
|
||||
|
||||
/* Set auto CRC on frame. */
|
||||
#if CC2520_CONF_AUTOACK
|
||||
setreg(CC2520_FRMCTRL0, AUTOCRC | AUTOACK);
|
||||
setreg(CC2520_FRMFILT0, FRAME_MAX_VERSION|FRAME_FILTER_ENABLE);
|
||||
setreg(CC2520_FRMCTRL0, AUTOCRC | AUTOACK);
|
||||
setreg(CC2520_FRMFILT0, FRAME_MAX_VERSION | FRAME_FILTER_ENABLE);
|
||||
#else
|
||||
/* setreg(CC2520_FRMCTRL0, 0x60); */
|
||||
setreg(CC2520_FRMCTRL0, AUTOCRC);
|
||||
setreg(CC2520_FRMCTRL0, AUTOCRC);
|
||||
/* Disable filter on @ (remove if you want to address specific wismote) */
|
||||
setreg(CC2520_FRMFILT0, 0x00);
|
||||
setreg(CC2520_FRMFILT0, 0x00);
|
||||
#endif /* CC2520_CONF_AUTOACK */
|
||||
/* SET_RXENMASK_ON_TX */
|
||||
setreg(CC2520_FRMCTRL1, 1);
|
||||
setreg(CC2520_FRMCTRL1, 1);
|
||||
/* Set FIFOP threshold to maximum .*/
|
||||
setreg(CC2520_FIFOPCTRL, FIFOP_THR(0x7F));
|
||||
setreg(CC2520_FIFOPCTRL, FIFOP_THR(0x7F));
|
||||
|
||||
cc2520_set_pan_addr(0xffff, 0x0000, NULL);
|
||||
cc2520_set_channel(26);
|
||||
|
|
@ -430,7 +434,7 @@ cc2520_transmit(unsigned short payload_len)
|
|||
|
||||
#if WITH_SEND_CCA
|
||||
strobe(CC2520_INS_SRXON);
|
||||
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID) , RTIMER_SECOND / 10);
|
||||
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID), RTIMER_SECOND / 10);
|
||||
strobe(CC2520_INS_STXONCCA);
|
||||
#else /* WITH_SEND_CCA */
|
||||
strobe(CC2520_INS_STXON);
|
||||
|
|
@ -457,24 +461,24 @@ cc2520_transmit(unsigned short payload_len)
|
|||
return RADIO_TX_COLLISION;
|
||||
}
|
||||
if(receive_on) {
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
||||
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
||||
}
|
||||
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
|
||||
/* We wait until transmission has ended so that we get an
|
||||
accurate measurement of the transmission time.*/
|
||||
//BUSYWAIT_UNTIL(getreg(CC2520_EXCFLAG0) & TX_FRM_DONE , RTIMER_SECOND / 100);
|
||||
accurate measurement of the transmission time.*/
|
||||
/* BUSYWAIT_UNTIL(getreg(CC2520_EXCFLAG0) & TX_FRM_DONE , RTIMER_SECOND / 100); */
|
||||
BUSYWAIT_UNTIL(!(status() & BV(CC2520_TX_ACTIVE)), RTIMER_SECOND / 10);
|
||||
|
||||
#ifdef ENERGEST_CONF_LEVELDEVICE_LEVELS
|
||||
ENERGEST_OFF_LEVEL(ENERGEST_TYPE_TRANSMIT,cc2520_get_txpower());
|
||||
ENERGEST_OFF_LEVEL(ENERGEST_TYPE_TRANSMIT, cc2520_get_txpower());
|
||||
#endif
|
||||
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
|
||||
if(receive_on) {
|
||||
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
||||
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
||||
} else {
|
||||
/* We need to explicitly turn off the radio,
|
||||
* since STXON[CCA] -> TX_ACTIVE -> RX_ACTIVE */
|
||||
off();
|
||||
/* We need to explicitly turn off the radio,
|
||||
* since STXON[CCA] -> TX_ACTIVE -> RX_ACTIVE */
|
||||
off();
|
||||
}
|
||||
|
||||
if(packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER) > 0) {
|
||||
|
|
@ -510,9 +514,9 @@ cc2520_prepare(const void *payload, unsigned short payload_len)
|
|||
|
||||
PRINTF("cc2520: sending %d bytes\n", payload_len);
|
||||
/*int i;
|
||||
for(i = 0; i < payload_len;i++)
|
||||
printf("%x",((uint8_t *) payload)[i]);
|
||||
printf("\n");*/
|
||||
for(i = 0; i < payload_len;i++)
|
||||
printf("%x",((uint8_t *) payload)[i]);
|
||||
printf("\n");*/
|
||||
RIMESTATS_ADD(lltx);
|
||||
|
||||
/* Wait for any previous transmission to finish. */
|
||||
|
|
@ -641,15 +645,14 @@ cc2520_set_pan_addr(unsigned pan,
|
|||
tmp[1] = pan >> 8;
|
||||
CC2520_WRITE_RAM(&tmp, CC2520RAM_PANID, 2);
|
||||
|
||||
|
||||
tmp[0] = addr & 0xff;
|
||||
tmp[1] = addr >> 8;
|
||||
CC2520_WRITE_RAM(&tmp, CC2520RAM_SHORTADDR, 2);
|
||||
if(ieee_addr != NULL) {
|
||||
int f;
|
||||
uint8_t tmp_addr[8];
|
||||
// LSB first, MSB last for 802.15.4 addresses in CC2520
|
||||
for (f = 0; f < 8; f++) {
|
||||
/* LSB first, MSB last for 802.15.4 addresses in CC2520 */
|
||||
for(f = 0; f < 8; f++) {
|
||||
tmp_addr[7 - f] = ieee_addr[f];
|
||||
}
|
||||
CC2520_WRITE_RAM(tmp_addr, CC2520RAM_IEEEADDR, 8);
|
||||
|
|
@ -737,15 +740,13 @@ cc2520_read(void *buf, unsigned short bufsize)
|
|||
getrxdata(footer, FOOTER_LEN);
|
||||
|
||||
if(footer[1] & FOOTER1_CRC_OK) {
|
||||
cc2520_last_rssi = footer[0];
|
||||
cc2520_last_rssi = footer[0] - RSSI_OFFSET;
|
||||
cc2520_last_correlation = footer[1] & FOOTER1_CORRELATION;
|
||||
|
||||
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, cc2520_last_rssi);
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, cc2520_last_correlation);
|
||||
|
||||
RIMESTATS_ADD(llrx);
|
||||
|
||||
} else {
|
||||
RIMESTATS_ADD(badcrc);
|
||||
len = FOOTER_LEN;
|
||||
|
|
@ -809,6 +810,7 @@ cc2520_rssi(void)
|
|||
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID), RTIMER_SECOND / 100);
|
||||
|
||||
rssi = (int)((signed char)getreg(CC2520_RSSI));
|
||||
rssi -= RSSI_OFFSET;
|
||||
|
||||
if(radio_was_off) {
|
||||
cc2520_off();
|
||||
|
|
@ -818,12 +820,12 @@ cc2520_rssi(void)
|
|||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
static int
|
||||
detected_energy(void)
|
||||
{
|
||||
return cc2520_rssi();
|
||||
}
|
||||
*/
|
||||
static int
|
||||
detected_energy(void)
|
||||
{
|
||||
return cc2520_rssi();
|
||||
}
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
int
|
||||
cc2520_cca_valid(void)
|
||||
|
|
|
|||
Loading…
Reference in a new issue