CC2520: Added offset to calculate correct RSSI value
This commit is contained in:
Sumankumar Panchal
parent
6947fc7381
commit
25dea7264a
|
|
@ -55,6 +55,13 @@
|
|||
#define FOOTER1_CRC_OK 0x80
|
||||
#define FOOTER1_CORRELATION 0x7f
|
||||
|
||||
#ifdef CC2520_CONF_RSSI_OFFSET
|
||||
#define RSSI_OFFSET CC2520_CONF_RSSI_OFFSET
|
||||
#else /* CC2520_CONF_RSSI_OFFSET */
|
||||
/* The RSSI_OFFSET is approximate 76 (see CC2520 specification) */
|
||||
#define RSSI_OFFSET 76
|
||||
#endif /* CC2520_CONF_RSSI_OFFSET */
|
||||
|
||||
#include <stdio.h>
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
|
|
@ -97,7 +104,6 @@ static volatile uint16_t last_packet_timestamp;
|
|||
PROCESS(cc2520_process, "CC2520 driver");
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
int cc2520_on(void);
|
||||
int cc2520_off(void);
|
||||
|
||||
|
|
@ -141,7 +147,6 @@ get_value(radio_param_t param, radio_value_t *value)
|
|||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
set_value(radio_param_t param, radio_value_t value)
|
||||
{
|
||||
|
|
@ -166,19 +171,16 @@ set_value(radio_param_t param, radio_value_t value)
|
|||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
get_object(radio_param_t param, void *dest, size_t size)
|
||||
{
|
||||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
|
||||
static radio_result_t
|
||||
set_object(radio_param_t param, const void *src, size_t size)
|
||||
{
|
||||
return RADIO_RESULT_NOT_SUPPORTED;
|
||||
}
|
||||
|
||||
const struct radio_driver cc2520_driver =
|
||||
{
|
||||
cc2520_init,
|
||||
|
|
@ -269,7 +271,9 @@ off(void)
|
|||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define GET_LOCK() locked++
|
||||
static void RELEASE_LOCK(void) {
|
||||
static void
|
||||
RELEASE_LOCK(void)
|
||||
{
|
||||
if(locked == 1) {
|
||||
if(lock_on) {
|
||||
on();
|
||||
|
|
@ -340,7 +344,7 @@ cc2520_init(void)
|
|||
/* correlation threshold = 20, RX bandpass filter = 1.3uA.*/
|
||||
|
||||
setreg(CC2520_TXCTRL, 0x94);
|
||||
setreg(CC2520_TXPOWER, 0x13); // Output power 1 dBm
|
||||
setreg(CC2520_TXPOWER, 0x13); /* Output power 1 dBm */
|
||||
|
||||
/*
|
||||
|
||||
|
|
@ -357,21 +361,21 @@ cc2520_init(void)
|
|||
0xF2 -> 3 dBm
|
||||
0xF7 -> 5 dBm
|
||||
*/
|
||||
setreg(CC2520_CCACTRL0, 0xF8); // CCA treshold -80dBm
|
||||
setreg(CC2520_CCACTRL0, 0xF8); /* CCA treshold -80dBm */
|
||||
|
||||
// Recommended RX settings
|
||||
setreg(CC2520_MDMCTRL0, 0x84); // Controls modem
|
||||
setreg(CC2520_MDMCTRL1, 0x14); // Controls modem
|
||||
setreg(CC2520_RXCTRL, 0x3F); // Adjust currents in RX related analog modules
|
||||
setreg(CC2520_FSCTRL, 0x5A); // Adjust currents in synthesizer.
|
||||
setreg(CC2520_FSCAL1, 0x2B); // Adjust currents in VCO
|
||||
setreg(CC2520_AGCCTRL1, 0x11); // Adjust target value for AGC control loop
|
||||
/* Recommended RX settings */
|
||||
setreg(CC2520_MDMCTRL0, 0x84); /* Controls modem */
|
||||
setreg(CC2520_MDMCTRL1, 0x14); /* Controls modem */
|
||||
setreg(CC2520_RXCTRL, 0x3F); /* Adjust currents in RX related analog modules */
|
||||
setreg(CC2520_FSCTRL, 0x5A); /* Adjust currents in synthesizer. */
|
||||
setreg(CC2520_FSCAL1, 0x2B); /* Adjust currents in VCO */
|
||||
setreg(CC2520_AGCCTRL1, 0x11); /* Adjust target value for AGC control loop */
|
||||
setreg(CC2520_AGCCTRL2, 0xEB);
|
||||
|
||||
// Disable external clock
|
||||
/* Disable external clock */
|
||||
setreg(CC2520_EXTCLOCK, 0x00);
|
||||
|
||||
// Tune ADC performance
|
||||
/* Tune ADC performance */
|
||||
setreg(CC2520_ADCTEST0, 0x10);
|
||||
setreg(CC2520_ADCTEST1, 0x0E);
|
||||
setreg(CC2520_ADCTEST2, 0x03);
|
||||
|
|
@ -462,7 +466,7 @@ cc2520_transmit(unsigned short payload_len)
|
|||
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
|
||||
/* We wait until transmission has ended so that we get an
|
||||
accurate measurement of the transmission time.*/
|
||||
//BUSYWAIT_UNTIL(getreg(CC2520_EXCFLAG0) & TX_FRM_DONE , RTIMER_SECOND / 100);
|
||||
/* BUSYWAIT_UNTIL(getreg(CC2520_EXCFLAG0) & TX_FRM_DONE , RTIMER_SECOND / 100); */
|
||||
BUSYWAIT_UNTIL(!(status() & BV(CC2520_TX_ACTIVE)), RTIMER_SECOND / 10);
|
||||
|
||||
#ifdef ENERGEST_CONF_LEVELDEVICE_LEVELS
|
||||
|
|
@ -641,14 +645,13 @@ cc2520_set_pan_addr(unsigned pan,
|
|||
tmp[1] = pan >> 8;
|
||||
CC2520_WRITE_RAM(&tmp, CC2520RAM_PANID, 2);
|
||||
|
||||
|
||||
tmp[0] = addr & 0xff;
|
||||
tmp[1] = addr >> 8;
|
||||
CC2520_WRITE_RAM(&tmp, CC2520RAM_SHORTADDR, 2);
|
||||
if(ieee_addr != NULL) {
|
||||
int f;
|
||||
uint8_t tmp_addr[8];
|
||||
// LSB first, MSB last for 802.15.4 addresses in CC2520
|
||||
/* LSB first, MSB last for 802.15.4 addresses in CC2520 */
|
||||
for(f = 0; f < 8; f++) {
|
||||
tmp_addr[7 - f] = ieee_addr[f];
|
||||
}
|
||||
|
|
@ -737,15 +740,13 @@ cc2520_read(void *buf, unsigned short bufsize)
|
|||
getrxdata(footer, FOOTER_LEN);
|
||||
|
||||
if(footer[1] & FOOTER1_CRC_OK) {
|
||||
cc2520_last_rssi = footer[0];
|
||||
cc2520_last_rssi = footer[0] - RSSI_OFFSET;
|
||||
cc2520_last_correlation = footer[1] & FOOTER1_CORRELATION;
|
||||
|
||||
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, cc2520_last_rssi);
|
||||
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, cc2520_last_correlation);
|
||||
|
||||
RIMESTATS_ADD(llrx);
|
||||
|
||||
} else {
|
||||
RIMESTATS_ADD(badcrc);
|
||||
len = FOOTER_LEN;
|
||||
|
|
@ -809,6 +810,7 @@ cc2520_rssi(void)
|
|||
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID), RTIMER_SECOND / 100);
|
||||
|
||||
rssi = (int)((signed char)getreg(CC2520_RSSI));
|
||||
rssi -= RSSI_OFFSET;
|
||||
|
||||
if(radio_was_off) {
|
||||
cc2520_off();
|
||||
|
|
|
|||
Loading…
Reference in a new issue