Multicast README

2011-11-11 13:29:55 +00:00 · 2011-11-11 13:29:55 +00:00 · 230881df44
commit 230881df44
parent 226701b098
1 changed files with 111 additions and 0 deletions
--- a/core/net/ipv6/multicast/README.md
+++ b/core/net/ipv6/multicast/README.md
@ -0,0 +1,111 @@
+README file for Contiki's IPv6 multicast core
+
+Author: George Oikonomou
+
+What does it do
+===============
+These files, alongside some core modifications, add support for IPv6 multicast
+to contiki's uIPv6 engine.
+
+Currently, two modes are supported:
+
+* 'Stateless Multicast RPL Forwarding' (SMRF)
+    RPL in MOP 3 handles group management as per the RPL docs,
+    SMRF is a lightweight engine which handles datagram forwarding.
+    SMRF is documented here:
+    http://dx.doi.org/10.1007/s11277-013-1250-5
+    and here:
+    http://dx.doi.org/10.1109/PerComW.2012.6197494
+* 'Multicast Forwarding with Trickle' according to the algorithm described
+    in the internet draft:
+    http://tools.ietf.org/html/draft-ietf-roll-trickle-mcast
+    The version of this draft that's currently implementated is documented
+    in `roll-tm.h`
+
+More engines can (and hopefully will) be added in the future. The first
+addition is most likely going to be an updated implementation of MPL
+
+The Big Gotcha
+==============
+Currently we only support traffic originating and destined inside a single 6LoWPAN
+To be able to send multicast traffic from the internet to 6LoWPAN nodes or the other
+way round, we need border routers or other gateway devices to be able to achieve
+the following:
+
+* Add/Remove Trickle Multicast, RPL or other HBHO headers as necessary for datagrams
+  entering / exiting the 6LoWPAN
+* Advertise multicast group membership to the internet (e.g. with MLD)
+
+These are currently not implemented and are in the ToDo list. Contributions welcome.
+
+Where to Start
+==============
+The best place in `examples/ipv6/multicast`
+
+There is a cooja example demonstrating basic functionality
+
+How to Use
+==========
+Look in `core/net/ipv6/multicast/uip-mcast6-engines.h` for a list of supported
+multicast engines.
+
+To turn on multicast support, add this line in your `project-` or `contiki-conf.h`
+
+        #define UIP_MCAST6_CONF_ENGINE xyz
+
+  where xyz is a value from `uip-mcast6-engines.h`
+
+To disable:
+
+        #define UIP_MCAST6_CONF_ENGINE 0
+
+You also need to make sure the multicast code gets built. Your example's
+(or platform's) Makefile should include this:
+
+        MODULES += core/net/ipv6/multicast
+
+How to extend
+=============
+Let's assume you want to write an engine called foo.
+The multicast API defines a multicast engine driver in a fashion similar to
+the various NETSTACK layer drivers. This API defines functions for basic
+multicast operations (init, in, out).
+In order to extend multicast with a new engine, perform the following steps:
+
+- Open `uip-mcast6-engines.h` and assign a unique integer code to your engine
+
+        #define UIP_MCAST6_ENGINE_FOO        xyz
+
+  - Include your engine's `foo.h`
+
+- In `foo.c`, implement:
+  * `init()`
+  * `in()`
+  * `out()`
+  * Define your driver like so:
+
+        `const struct uip_mcast6_driver foo_driver = { ... }`
+
+- If you want to maintain stats:
+  * Declare a `struct foo_stats` in `foo.h`
+  * Define a variable of type `struct foo_stats` called `foo_stats` in `foo.c`
+    The names `foo_stats` for the stats variable and stats datatype are only
+    examples. You can assign different names
+
+- Open `uip-mcast6.h` and add a section in the `#if` spree. This aims to
+  configure the uIPv6 core. More specifically, you need to:
+  * Specify if you want to put RPL in MOP3 by defining
+      `RPL_CONF_MULTICAST`: 1: MOP 3, 0: non-multicast MOP
+  * Define your engine details
+
+            #define UIP_MCAST6             foo_driver
+            #define UIP_MCAST6_STATS       foo_stats
+            typedef struct foo_stats uip_mcast6_stats_t;
+
+  * Optionally, add a configuration check block to stop builds when the
+    configuration is not sane.
+
+If you need your engine to perform operations not supported by the generic
+UIP_MCAST6 API, you will have to hook those in the uip core manually. As an
+example, see how the core is modified so that it can deliver ICMPv6 datagrams
+to the ROLL TM engine.