Addition of USB files

2008-10-14 20:16:36 +00:00 · 2008-10-14 20:16:36 +00:00 · 219846f408
commit 219846f408
parent a520fe4646
36 changed files with 11046 additions and 0 deletions
--- a/cpu/avr/dev/usb/conf_usb.h
+++ b/cpu/avr/dev/usb/conf_usb.h
@ -0,0 +1,148 @@
+/* This file has been prepared for Doxygen automatic documentation generation.*/
+/*! \file conf_usb.h **********************************************************
+ *
+ * \brief
+ *      This file contains the possible external configuration of the USB.
+ *
+ * \addtogroup usbstick
+ *
+ * \author
+ *      Atmel Corporation: http://www.atmel.com \n
+ *      Support email: avr@atmel.com
+ *
+ ******************************************************************************/
+/* Copyright (c) 2008  ATMEL Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef _CONF_USB_H_
+#define _CONF_USB_H_
+
+
+
+/**
+   \ingroup usbstick
+   \defgroup usbconf USB Configuration
+   @{
+*/
+
+
+   // _________________ USB MODE CONFIGURATION ____________________________
+   //! @ingroup usbconf
+   //! @defgroup USB_op_mode USB operating modes configuration
+   //! defines to enable device or host usb operating modes
+   //! supported by the application
+   //! @{
+
+      //! @brief ENABLE to activate the host software library support
+      //!
+      //! Possible values ENABLE or DISABLE
+      #define USB_HOST_FEATURE            DISABLED
+
+      //! @brief ENABLE to activate the device software library support
+      //!
+      //! Possible values ENABLE or DISABLE
+      #define USB_DEVICE_FEATURE          ENABLED
+
+   //! @}
+
+   // _________________ USB REGULATOR CONFIGURATION _______________________
+   //! @ingroup usbconf
+   //! @defgroup USB_reg_mode USB regulator configuration
+   //! @{
+
+   //! @brief Enable the internal regulator for USB pads
+   //!
+   //! When the application voltage is lower than 3.5V, to optimize power consumption
+   //! the internal USB pads regulatr can be disabled.
+#ifndef USE_USB_PADS_REGULATOR
+   #define USE_USB_PADS_REGULATOR   ENABLE      // Possible values ENABLE or DISABLE
+#endif
+   //! @}
+
+// _________________ DEVICE MODE CONFIGURATION __________________________
+
+   //! @ingroup usbconf
+   //! @defgroup USB_device_mode_cfg USB device operating mode configuration
+   //!
+   //! @{
+
+/** USB RNDIS / Virtual com port setup **/
+
+#define NB_ENDPOINTS        7  //!  number of endpoints in the application including control endpoint
+#define VCP_RX_EP			0x06
+#define VCP_TX_EP			0x05
+#define VCP_INT_EP			0x04
+#define TX_EP				0x02
+#define RX_EP				0x03
+#define INT_EP              0x01
+
+/** USB Mass Storage Setup **/
+
+#define NB_ENDPOINTS_MS     3 //!  number of endpoints in the application including control endpoint
+#define MS_IN_EP            0x01
+#define MS_OUT_EP           0x02
+
+#define USB_LOW_SPEED_DEVICE DISABLE
+
+
+#define Usb_unicode(a)			((U16)(a))
+
+   //! @ingroup usbconf
+   //! @defgroup device_cst_actions USB device custom actions
+   //!
+   //! @{
+   // write here the action to associate to each USB event
+   // be carefull not to waste time in order not disturbing the functions
+#define Usb_sof_action()         /* sof_action(); */
+#define Usb_wake_up_action()
+#define Usb_resume_action()
+#define Usb_suspend_action()     suspend_action();
+#define Usb_reset_action()
+#define Usb_vbus_on_action()
+#define Usb_vbus_off_action()
+#define Usb_set_configuration_action()
+
+
+// write here the action to associate to each SCSI event
+// be carefull not to waste time in order not disturbing the functions
+#define Scsi_start_read_action()    Led1_on()
+#define Scsi_stop_read_action()     Led1_off()
+#define Scsi_start_write_action()   Led2_on()
+#define Scsi_stop_write_action()    Led2_off()
+
+   //! @}
+
+extern void sof_action(void);
+extern void suspend_action(void);
+   //! @}
+
+
+/** @}  */
+
+#endif // _CONF_USB_H_