Added PM10 and VAC parameters to adc_sensors driver

examples/zolertia/zoul/Makefile

@@ -4,7 +4,7 @@ CONTIKI_PROJECT = zoul-demo test-tsl2563 test-sht25 test-pwm test-power-mgmt
 CONTIKI_PROJECT += test-bmp085-bmp180 test-motion test-rotation-sensor
 CONTIKI_PROJECT += test-grove-light-sensor test-grove-loudness-sensor
 CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd
-
+CONTIKI_PROJECT += test-pm10 test-vac-sensor
 CONTIKI_TARGET_SOURCEFILES += tsl2563.c sht25.c bmpx8x.c motion-sensor.c
 CONTIKI_TARGET_SOURCEFILES += adc-sensors.c weather-meter.c grove-gyro.c
 CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c

examples/zolertia/zoul/test-pm10.c

@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2016, Zolertia - http://www.zolertia.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * \addtogroup zoul-examples
+ * @{
+ *
+ * Demonstrates the operation of the Sharp PM10 analog sensor
+ * @{
+ *
+ * \file
+ * GP2Y1010AU0F  PM10 sensor example using the ADC sensors wrapper   
+ *
+ * \author
+ *         Toni Lozano <tlozano@zolertia.com>
+ */
+/*---------------------------------------------------------------------------*/
+#include <stdio.h>
+#include "contiki.h"
+#include "dev/leds.h"
+#include "dev/adc-sensors.h"
+/*---------------------------------------------------------------------------*/
+#define ADC_PIN              2
+#define SENSOR_READ_INTERVAL (CLOCK_SECOND / 8)
+/*---------------------------------------------------------------------------*/
+PROCESS(remote_pm10_sensor_process, "PM10 sensor test process");
+AUTOSTART_PROCESSES(&remote_grove_loudness_process);
+/*---------------------------------------------------------------------------*/
+static struct etimer et;
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(remote_pm10_sensor_process, ev, data)
+{
+  PROCESS_BEGIN();
+
+  uint16_t pm10_value;
+
+  /* Use pin number not mask, for example if using the PA5 pin then use 2 */
+  adc_sensors.configure(ANALOG_PM10_SENSOR, ADC_PIN);
+
+  /* And periodically poll the sensor */
+
+  while(1) {
+    etimer_set(&et, SENSOR_READ_INTERVAL);
+    PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
+
+    leds_toggle(LEDS_GREEN);
+
+    pm10_value = adc_sensors.value(ANALOG_PM10_SENSOR);
+
+    if(pm10_value != ADC_WRAPPER_ERROR) {
+      printf("%u\n", pm10_value);
+    } else {
+      printf("Error, enable the DEBUG flag in adc-wrapper.c for info\n");
+      PROCESS_EXIT();
+    }
+
+  }
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ */
+

examples/zolertia/zoul/test-vac-sensor.c

@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2012, Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (c) 2015, Zolertia - http://www.zolertia.com
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
+ * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ *
+ *
+ * @{
+ *
+ * \file
+ *     Example demonstrating the Zoul module on the RE-Mote & VAC sensor
+ */
+#include "contiki.h"
+#include "cpu.h"
+#include "sys/etimer.h"
+#include "sys/rtimer.h"
+#include "dev/leds.h"
+#include "dev/uart.h"
+#include "dev/button-sensor.h"
+#include "dev/zoul-sensors.h"
+#include "dev/watchdog.h"
+#include "dev/serial-line.h"
+#include "dev/sys-ctrl.h"
+#include "net/rime/broadcast.h"
+#include "dev/adc-sensors.h"
+
+#include <stdio.h>
+#include <stdint.h>
+/*---------------------------------------------------------------------------*/
+#define ADC_PIN             2
+#define LOOP_PERIOD         2
+#define LOOP_INTERVAL       (CLOCK_SECOND * LOOP_PERIOD)
+#define LEDS_PERIODIC       LEDS_GREEN
+#define BUTTON_PRESS_EVENT_INTERVAL (CLOCK_SECOND)
+/*---------------------------------------------------------------------------*/
+static struct etimer et;
+
+static uint16_t counter;
+/*---------------------------------------------------------------------------*/
+PROCESS(zoul_demo_process, "Zoul demo process");
+AUTOSTART_PROCESSES(&zoul_demo_process);
+/*---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------*/
+
+/*---------------------------------------------------------------------------*/
+PROCESS_THREAD(zoul_demo_process, ev, data)
+{
+  
+  PROCESS_BEGIN();
+
+  counter = 0;
+
+  /* Configure the user button */
+  button_sensor.configure(BUTTON_SENSOR_CONFIG_TYPE_INTERVAL,
+                          BUTTON_PRESS_EVENT_INTERVAL);
+
+  /* Configure the ADC ports */
+  /* Use pin number not mask, for example if using the PA5 pin then use 5 */
+  printf("return configure, %d \n", adc_sensors.configure(ANALOG_VAC_SENSOR, ADC_PIN));
+
+  printf("VAC test application\n");
+  leds_on(LEDS_PERIODIC);
+  etimer_set(&et, LOOP_INTERVAL);
+
+  while(1) {
+
+    PROCESS_YIELD();
+
+    if(ev == PROCESS_EVENT_TIMER) {
+      leds_toggle(LEDS_PERIODIC);
+
+      printf("-----------------------------------------\n"
+             "Counter = 0x%08x\n", counter);
+
+      printf("ADC3 = %d V\n", adc_sensors.value(ANALOG_VAC_SENSOR));
+      uint32_t as = (adc_sensors.value(ANALOG_VAC_SENSOR) * 0.176);
+      printf("ADC5V = %ld V\n", as);
+      //printf("AC voltage = %d V\n", vac.value(VAC_VAL));
+     
+      etimer_set(&et, LOOP_INTERVAL);
+      counter++;
+    }   
+  }
+
+  PROCESS_END();
+}
+/*---------------------------------------------------------------------------*/
+/**
+ * @}
+ * @}
+ * @}
+ */

platform/zoul/dev/adc-sensors.c

@@ -108,6 +108,18 @@ convert_to_value(uint8_t index)
     value /= 100000;
     return (uint16_t)value;
 
+  case ANALOG_VAC_SENSOR:
+    /* Linear sensor from 0 to 5 V; 0.0088 resolution*/
+    value *= 88;
+    value /= 10000;
+    return (uint16_t)value;
+
+  case ANALOG_PM10_SENSOR:
+    /* PM10 sensor from 0 to 5 V; 0.0088 resolution*/
+    value *= 88;
+    value /= 10000;
+    return (uint16_t)value;
+
   default:
     return ADC_WRAPPER_ERROR;
   }
@@ -154,7 +166,8 @@ configure(int type, int value)
   uint8_t pin_mask = GPIO_PIN_MASK(value);
 
   if((type != ANALOG_GROVE_LIGHT) && (type != ANALOG_PHIDGET_ROTATION_1109) &&
-     (type != ANALOG_GROVE_LOUDNESS)) {
+     (type != ANALOG_GROVE_LOUDNESS) && (type != ANALOG_PM10_SENSOR) &&
+     (type != ANALOG_VAC_SENSOR) ) {
     PRINTF("ADC sensors: sensor not supported, check adc_wrapper.h header\n");
     return ADC_WRAPPER_ERROR;
   }
@@ -179,6 +192,7 @@ configure(int type, int value)
   case ANALOG_GROVE_LIGHT:
   case ANALOG_GROVE_LOUDNESS:
   case ANALOG_PHIDGET_ROTATION_1109:
+  case ANALOG_VAC_SENSOR:
     if(adc_zoul.configure(SENSORS_HW_INIT, pin_mask) == ZOUL_SENSORS_ERROR) {
       return ADC_WRAPPER_ERROR;
     }

platform/zoul/dev/adc-sensors.h

@@ -71,6 +71,8 @@
 #define ANALOG_GROVE_LIGHT                  0x01
 #define ANALOG_PHIDGET_ROTATION_1109        0x02
 #define ANALOG_GROVE_LOUDNESS               0x03
+#define ANALOG_VAC_SENSOR                   0x04
+#define ANALOG_PM10_SENSOR                  0x05
 /* -------------------------------------------------------------------------- */
 #define ADC_SENSORS "ADC sensors API"
 /* -------------------------------------------------------------------------- */

platform/zoul/dev/pm10-sensor.c

@@ -0,0 +1,73 @@
+	/*
+ * Copyright (c) 2015, Zolertia <http://www.zolertia.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ *
+ * @{
+ *
+ * \file
+ *      GP2Y1010AU0F  PM10 sensor example using the ADC sensors wrapper  
+ * \author
+ *      Toni Lozano <tlozano@zolertia.com>
+ */
+/*---------------------------------------------------------------------------*/
+#include <stdio.h>
+#include "contiki.h"
+#include "adc-sensors.h"
+#include "dev/pm10-sensor.h"
+#include "lib/sensors.h"
+/*---------------------------------------------------------------------------*/
+static uint8_t enabled;
+/*---------------------------------------------------------------------------*/
+static int
+configure(int value)
+{
+  int error;
+  /* Use pin number not mask, for example if using the PA5 pin then use 5 */
+  error = adc_sensors.configure(ANALOG_PM10_SENSORS, value);
+
+  return error;
+}
+/*---------------------------------------------------------------------------*/
+static int
+value(void)
+{
+  uint16_t val;
+  //TODO: Add here GPIO pulses before measuring
+  val = adc_sensors.value(ANALOG_PM10_SENSOR); 
+
+  return val;
+}
+/*---------------------------------------------------------------------------*/
+SENSORS_SENSOR(pm10, PM10_SENSOR, value, configure, NULL);
+/*---------------------------------------------------------------------------*/
+/** @} */

platform/zoul/dev/pm10-sensot.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2015, Zolertia <http://www.zolertia.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+/**
+ * 
+ *
+ *
+ * \file
+ *         GP2Y1010AU0F PM-10 sensor driver
+ * \author
+ *         Toni Lozano <tlozano@zolertia.com>
+ */
+/*---------------------------------------------------------------------------*/
+#include "lib/sensors.h"
+
+#ifndef PM10_SENSOR_H_
+#define PM10_SENSOR_H_
+
+/* -------------------------------------------------------------------------- */
+#define PM10_ERROR	-1
+#define PM10_PORT	ZOUL_SENSORS_ADC3
+#define PM10_VAL		0x00
+#define PM10_SENSOR "PM10 Sensor"
+/* -------------------------------------------------------------------------- */
+extern const struct sensors_sensor vac;
+/* -------------------------------------------------------------------------- */
+#endif /* ifndef VAC_SENSOR_H_ */
+/**
+ * @}
+ * @}
+ */