Register generic ICMPv6 handlers for IPv6 ND

This commit is contained in:
George Oikonomou 2014-03-08 21:35:17 +00:00
parent af43d2125b
commit 1d3da44991
3 changed files with 82 additions and 50 deletions

View file

@ -126,8 +126,6 @@ static uip_ds6_prefix_t *prefix; /** Pointer to a prefix list entry */
static uip_ds6_nbr_t *nbr; /** Pointer to a nbr cache entry*/
static uip_ds6_defrt_t *defrt; /** Pointer to a router list entry */
static uip_ds6_addr_t *addr; /** Pointer to an interface address */
/*------------------------------------------------------------------*/
/* create a llao */
static void
@ -143,8 +141,8 @@ create_llao(uint8_t *llao, uint8_t type) {
/*------------------------------------------------------------------*/
void
uip_nd6_ns_input(void)
static void
ns_input(void)
{
uint8_t flags;
PRINTF("Received NS from ");
@ -388,12 +386,26 @@ uip_nd6_ns_output(uip_ipaddr_t * src, uip_ipaddr_t * dest, uip_ipaddr_t * tgt)
PRINTF("\n");
return;
}
/*------------------------------------------------------------------*/
void
uip_nd6_na_input(void)
/**
* Neighbor Advertisement Processing
*
* we might have to send a pkt that had been buffered while address
* resolution was performed (if we support buffering, see UIP_CONF_QUEUE_PKT)
*
* As per RFC 4861, on link layer that have addresses, TLLAO options MUST be
* included when responding to multicast solicitations, SHOULD be included in
* response to unicast (here we assume it is for now)
*
* NA can be received after sending NS for DAD, Address resolution or NUD. Can
* be unsolicited as well.
* It can trigger update of the state of the neighbor in the neighbor cache,
* router in the router list.
* If the NS was for DAD, it means DAD failed
*
*/
static void
na_input(void)
{
uint8_t is_llchange;
uint8_t is_router;
@ -548,8 +560,8 @@ discard:
#if UIP_CONF_ROUTER
#if UIP_ND6_SEND_RA
/*---------------------------------------------------------------------------*/
void
uip_nd6_rs_input(void)
static void
rs_input(void)
{
PRINTF("Received RS from");
@ -761,11 +773,18 @@ uip_nd6_rs_output(void)
PRINTF("\n");
return;
}
/*---------------------------------------------------------------------------*/
/*
* Process a Router Advertisement
*
* - Possible actions when receiving a RA: add router to router list,
* recalculate reachable time, update link hop limit, update retrans timer.
* - If MTU option: update MTU.
* - If SLLAO option: update entry in neighbor cache
* - If prefix option: start autoconf, add prefix to prefix list
*/
void
uip_nd6_ra_input(void)
ra_input(void)
{
PRINTF("Received RA from");
PRINT6ADDR(&UIP_IP_BUF->srcipaddr);
@ -969,6 +988,52 @@ discard:
return;
}
#endif /* !UIP_CONF_ROUTER */
/*------------------------------------------------------------------*/
/* ICMPv6 input handlers */
#if UIP_ND6_SEND_NA
UIP_ICMP6_HANDLER(ns_input_handler, ICMP6_NS, UIP_ICMP6_HANDLER_CODE_ANY,
ns_input);
UIP_ICMP6_HANDLER(na_input_handler, ICMP6_NA, UIP_ICMP6_HANDLER_CODE_ANY,
na_input);
#endif
#if UIP_CONF_ROUTER && UIP_ND6_SEND_RA
UIP_ICMP6_HANDLER(rs_input_handler, ICMP6_RS, UIP_ICMP6_HANDLER_CODE_ANY,
rs_input);
#endif
#if !UIP_CONF_ROUTER
UIP_ICMP6_HANDLER(ra_input_handler, ICMP6_RA, UIP_ICMP6_HANDLER_CODE_ANY,
ra_input);
#endif
/*---------------------------------------------------------------------------*/
void
uip_nd6_init()
{
#if UIP_ND6_SEND_NA
/* Only handle NSs if we are prepared to send out NAs */
uip_icmp6_register_input_handler(&ns_input_handler);
/*
* Only handle NAs if we are prepared to send out NAs.
* This is perhaps logically incorrect, but this condition was present in
* uip_process and we keep it until proven wrong
*/
uip_icmp6_register_input_handler(&na_input_handler);
#endif
#if UIP_CONF_ROUTER && UIP_ND6_SEND_RA
/* Only accept RS if we are a router and happy to send out RAs */
uip_icmp6_register_input_handler(&rs_input_handler);
#endif
#if !UIP_CONF_ROUTER
/* Only process RAs if we are not a router */
uip_icmp6_register_input_handler(&ra_input_handler);
#endif
}
/*---------------------------------------------------------------------------*/
/** @} */
#endif /* UIP_CONF_IPV6 */

View file

@ -337,34 +337,8 @@ uip_nd6_ns_input(void);
void
uip_nd6_ns_output(uip_ipaddr_t *src, uip_ipaddr_t *dest, uip_ipaddr_t *tgt);
/**
* \brief Process a Neighbor Advertisement
*
* we might have to send a pkt that had been buffered while address
* resolution was performed (if we support buffering, see UIP_CONF_QUEUE_PKT)
*
* As per RFC 4861, on link layer that have addresses, TLLAO options MUST be
* included when responding to multicast solicitations, SHOULD be included in
* response to unicast (here we assume it is for now)
*
* NA can be received after sending NS for DAD, Address resolution or NUD. Can
* be unsolicited as well.
* It can trigger update of the state of the neighbor in the neighbor cache,
* router in the router list.
* If the NS was for DAD, it means DAD failed
*
*/
void
uip_nd6_na_input(void);
#if UIP_CONF_ROUTER
#if UIP_ND6_SEND_RA
/**
* \brief Process a Router Solicitation
*
*/
void uip_nd6_rs_input(void);
/**
* \brief send a Router Advertisement
*
@ -388,17 +362,9 @@ void uip_nd6_ra_output(uip_ipaddr_t *dest);
void uip_nd6_rs_output(void);
/**
*
* \brief process a Router Advertisement
*
* - Possible actions when receiving a RA: add router to router list,
* recalculate reachable time, update link hop limit, update retrans timer.
* - If MTU option: update MTU.
* - If SLLAO option: update entry in neighbor cache
* - If prefix option: start autoconf, add prefix to prefix list
* \brief Initialise the uIP ND core
*/
void
uip_nd6_ra_input(void);
void uip_nd6_init(void);
/** @} */

View file

@ -412,6 +412,7 @@ uip_init(void)
uip_ds6_init();
uip_icmp6_init();
uip_nd6_init();
#if UIP_TCP
for(c = 0; c < UIP_LISTENPORTS; ++c) {