deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

cleanup code

Browse source
This commit is contained in:
Harald Pichler 2017-10-19 15:44:11 +02:00
parent e93083073c
commit 15039f6b5d
3 changed files with 11 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
examples/osd/arduino-dht/DHT.h
View file

@ -8,6 +8,7 @@ written by Adafruit Industries
#include "Arduino.h"
// Uncomment to enable printing out nice debug messages.
//#define DHT_DEBUG

2
examples/osd/arduino-dht/project-conf.h
View file

@ -38,7 +38,7 @@
#define SICSLOWPAN_CONF_FRAG 1
#define LOOP_INTERVAL (30 * CLOCK_SECOND)
#define LOOP_INTERVAL (10 * CLOCK_SECOND)
/* Save energy */
//#define RDC_CONF_PT_YIELD_OFF

12
examples/osd/arduino-dht/sketch.pde
View file

@ -32,13 +32,13 @@ extern resource_t res_dhtctemp, res_dhtchum;
// Connect pin 2 of the sensor to whatever your DHTPIN is
// Connect pin 4 (on the right) of the sensor to GROUND
// Connect a 10K resistor from pin 2 (data) to pin 1 (power) o
#define DHTPINA 9 // what digital pin we're connected to
#define DHTPINA 7 // what digital pin we're connected to
DHT dhta(DHTPINA, DHTTYPE);
#define DHTPINB 8 // what digital pin we're connected to
DHT dhtb(DHTPINB, DHTTYPE);
#define DHTPINC 7 // what digital pin we're connected to
#define DHTPINC 9 // what digital pin we're connected to
DHT dhtc(DHTPINC, DHTTYPE);
float dhta_hum;
@ -86,6 +86,7 @@ void setup (void)
// LOOP_INTERVAL (30 * CLOCK_SECOND)
void loop (void)
{
int errdht=0;
// Reading temperature or humidity takes about 250 milliseconds!
// Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
dhta_hum = dhta.readHumidity();
@ -99,14 +100,17 @@ void loop (void)
// Check if any reads failed and exit early (to try again).
if (isnan(dhta_hum) || isnan(dhta_temp)) {
printf("Failed to read from DHTa sensor!\n");
return;
errdht=1;
}
if (isnan(dhtb_hum) || isnan(dhtb_temp)) {
printf("Failed to read from DHTb sensor!\n");
return;
errdht=1;
}
if (isnan(dhtc_hum) || isnan(dhtc_temp)) {
printf("Failed to read from DHTc sensor!\n");
errdht=1;
}
if (errdht){
return;
}