preliminary interrupts. looks like it is entering the isr but isn't
leaving correctly.
This commit is contained in:
parent
28c1ed2105
commit
09b15558a1
17
Makefile
17
Makefile
|
@ -58,12 +58,23 @@ ALL = $(TESTS:.c=.srec) $(TESTS:.c=.bin) $(TESTS:.c=.dis)
|
|||
|
||||
.PRECIOUS: $(COBJS) $(TARGETS) $(TESTS:.c=.obj)
|
||||
|
||||
all: src/start.o $(ALL)
|
||||
all: src/start.o src/isr.o $(ALL)
|
||||
|
||||
tests/nvm-read.obj: src/maca.o src/nvm.o
|
||||
tests/rftest-rx.obj: src/maca.o src/nvm.o
|
||||
tests/rftest-tx.obj: src/maca.o src/nvm.o
|
||||
tests/tmr-ints.c: src/interrupt-utils.o src/sys-interrupt.o
|
||||
tests/tmr-ints.obj: src/interrupt-utils.o src/sys-interrupt.o src/isr.o
|
||||
|
||||
NOTHUMB_CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
|
||||
-D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
|
||||
-I$(TOPDIR)/include \
|
||||
-fno-builtin -ffreestanding -nostdinc -isystem \
|
||||
$(gccincdir) -pipe
|
||||
NOTHUMB_CPPFLAGS_EXTRA = -march=armv4t -mlong-calls -mthumb-interwork -mtune=arm7tdmi-s -DCONFIG_ARM -D__ARM__
|
||||
|
||||
|
||||
src/isr.o: src/isr.c
|
||||
$(CC) $(NOTHUMB_CPPFLAGS) $(NOTHUMB_CPPFLAGS_EXTRA) -c -o $@ $<
|
||||
|
||||
%.srec: %.obj
|
||||
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
|
||||
|
@ -77,7 +88,7 @@ tests/tmr-ints.c: src/interrupt-utils.o src/sys-interrupt.o
|
|||
%.dis: %.obj
|
||||
$(OBJDUMP) -SD $< > $@
|
||||
|
||||
%.obj: $(LDSCRIPT) %.o
|
||||
%.obj: $(LDSCRIPT) %.o src/interrupt-utils.o
|
||||
$(LD) $(LDFLAGS) $(AOBJS) \
|
||||
--start-group $(PLATFORM_LIBS) --end-group \
|
||||
-Map $*.map $^ -o $@
|
||||
|
|
1
boot.lds
1
boot.lds
|
@ -33,6 +33,7 @@ SECTIONS
|
|||
.text :
|
||||
{
|
||||
src/start.o (.text)
|
||||
src/isr.o (.text)
|
||||
*(.text)
|
||||
}
|
||||
|
||||
|
|
|
@ -1,8 +1,7 @@
|
|||
#ifndef __SYS_INTERRUPT_H__QIHZ66NP8K__
|
||||
#define __SYS_INTERRUPT_H__QIHZ66NP8K__
|
||||
#ifndef __SYS_INTERRUPT_H
|
||||
#define __SYS_INTERRUPT_H
|
||||
|
||||
|
||||
/* Returns true if it handled an activbe interrupt */
|
||||
/* Returns true if it handled an active interrupt */
|
||||
typedef int (*SystemInterruptFunc)();
|
||||
|
||||
typedef struct _SystemInterruptHandler SystemInterruptHandler;
|
||||
|
@ -12,7 +11,6 @@ struct _SystemInterruptHandler
|
|||
SystemInterruptFunc handler;
|
||||
};
|
||||
|
||||
|
||||
void
|
||||
sys_interrupt_enable();
|
||||
|
||||
|
@ -28,4 +26,4 @@ sys_interrupt_prepend_handler(SystemInterruptHandler *handler);
|
|||
void
|
||||
sys_interrupt_remove_handler(SystemInterruptHandler *handler);
|
||||
|
||||
#endif /* __SYS_INTERRUPT_H__QIHZ66NP8K__ */
|
||||
#endif /* __SYS_INTERRUPT_H */
|
||||
|
|
|
@ -197,7 +197,7 @@ not_used:
|
|||
|
||||
.align 5
|
||||
irq:
|
||||
|
||||
b isr
|
||||
.align 5
|
||||
fiq:
|
||||
|
||||
|
|
|
@ -5,6 +5,9 @@
|
|||
#define DELAY 400000
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "isr.h"
|
||||
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
|
|
@ -5,6 +5,9 @@
|
|||
#define DELAY 400000
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "isr.h"
|
||||
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
|
|
@ -5,6 +5,9 @@
|
|||
#define DELAY 400000
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "isr.h"
|
||||
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup"))) void main(void) {
|
||||
*(volatile uint32_t *)GPIO_PAD_DIR0 = 0x00000100;
|
||||
|
|
|
@ -5,6 +5,9 @@
|
|||
#define DELAY 400000
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "isr.h"
|
||||
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
|
|
@ -29,6 +29,10 @@ void put_hex32(uint32_t x);
|
|||
const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
|
||||
'8','9','a','b','c','d','e','f'};
|
||||
|
||||
#include "isr.h"
|
||||
|
||||
no_isrs();
|
||||
|
||||
#define NBYTES 1024
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
|
|
@ -77,6 +77,9 @@ void toggle_led(void) {
|
|||
}
|
||||
}
|
||||
|
||||
#include "isr.h"
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
uint8_t c;
|
||||
|
|
|
@ -112,6 +112,9 @@ void fill_data(void) {
|
|||
}
|
||||
}
|
||||
|
||||
#include "isr.h"
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
uint8_t c;
|
||||
|
|
|
@ -28,6 +28,9 @@ const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
|
|||
#define DUMP_LEN 0x00014000
|
||||
//#define DUMP_LEN 16
|
||||
|
||||
#include "isr.h"
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
volatile uint32_t i;
|
||||
|
|
|
@ -47,12 +47,40 @@
|
|||
#define reg16(x) (*(volatile uint16_t *)(x))
|
||||
|
||||
#include "embedded_types.h"
|
||||
#include "sys-interrupt.h"
|
||||
|
||||
#include "isr.h"
|
||||
|
||||
volatile uint8_t led;
|
||||
|
||||
#define LED_VAL 0x00000300
|
||||
#define led_init() do { reg32(GPIO_PAD_DIR0) = LED_VAL; } while(0);
|
||||
#define led_on() do { led = 1; reg32(GPIO_DATA0) = LED_VAL; } while(0);
|
||||
#define led_off() do { led = 0; reg32(GPIO_DATA0) = 0x00000000; } while(0);
|
||||
|
||||
void toggle_led(void) {
|
||||
if(0 == led) {
|
||||
led_on();
|
||||
led = 1;
|
||||
|
||||
} else {
|
||||
led_off();
|
||||
}
|
||||
}
|
||||
|
||||
void tmr_isr(void) {
|
||||
|
||||
toggle_led();
|
||||
reg16(TMR0_SCTRL) = 0;
|
||||
reg16(TMR0_CSCTRL) = 0x0040; /* clear compare flag */
|
||||
|
||||
}
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
||||
/* pin direction */
|
||||
reg32(GPIO_PAD_DIR0) = 0x00000400;
|
||||
led_init();
|
||||
|
||||
/* timer setup */
|
||||
/* CTRL */
|
||||
|
@ -67,6 +95,7 @@ void main(void) {
|
|||
|
||||
reg16(TMR_ENBL) = 0; /* tmrs reset to enabled */
|
||||
reg16(TMR0_SCTRL) = 0;
|
||||
reg16(TMR0_CSCTRL) =0x0040;
|
||||
reg16(TMR0_LOAD) = 0; /* reload to zero */
|
||||
reg16(TMR0_COMP_UP) = 18750; /* trigger a reload at the end */
|
||||
reg16(TMR0_CMPLD1) = 18750; /* compare 1 triggered reload level, 10HZ maybe? */
|
||||
|
@ -74,19 +103,12 @@ void main(void) {
|
|||
reg16(TMR0_CTRL) = (COUNT_MODE<<13) | (PRIME_SRC<<9) | (SEC_SRC<<7) | (ONCE<<6) | (LEN<<5) | (DIR<<4) | (CO_INIT<<3) | (OUT_MODE);
|
||||
reg16(TMR_ENBL) = 0xf; /* enable all the timers --- why not? */
|
||||
|
||||
led_on();
|
||||
|
||||
enable_tmr_irq();
|
||||
enableIRQ();
|
||||
|
||||
while(1) {
|
||||
|
||||
/* blink on */
|
||||
reg32(GPIO_DATA0) = 0x00000400;
|
||||
|
||||
while((reg16(TMR0_SCTRL)>>15) == 0) { continue; }
|
||||
reg16(TMR0_SCTRL) = 0; /*clear bit 15, and all the others --- should be ok, but clearly not "the right thing to do" */
|
||||
|
||||
/* blink off */
|
||||
reg32(GPIO_DATA0) = 0x00000000;
|
||||
|
||||
while((reg16(TMR0_SCTRL)>>15) == 0) { continue; }
|
||||
reg16(TMR0_SCTRL) = 0; /*clear bit 15, and all the others --- should be ok, but clearly not "the right thing to do" */
|
||||
|
||||
/* sit here and let the interrupts do the work */
|
||||
};
|
||||
}
|
||||
|
|
|
@ -48,6 +48,9 @@
|
|||
|
||||
#include "embedded_types.h"
|
||||
|
||||
#include "isr.h"
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
|
||||
|
|
|
@ -11,6 +11,9 @@
|
|||
|
||||
#include "embedded_types.h"
|
||||
|
||||
#include "isr.h"
|
||||
no_isrs();
|
||||
|
||||
__attribute__ ((section ("startup")))
|
||||
void main(void) {
|
||||
/* Restore UART regs. to default */
|
||||
|
|
Loading…
Reference in a new issue