preliminary interrupts. looks like it is entering the isr but isn't

leaving correctly.

Makefile

@@ -58,12 +58,23 @@ ALL = $(TESTS:.c=.srec) $(TESTS:.c=.bin) $(TESTS:.c=.dis)
 
 .PRECIOUS: 	$(COBJS) $(TARGETS) $(TESTS:.c=.obj)
 
-all:		src/start.o $(ALL)
+all:		src/start.o src/isr.o $(ALL)
 
 tests/nvm-read.obj: src/maca.o src/nvm.o
 tests/rftest-rx.obj: src/maca.o src/nvm.o
 tests/rftest-tx.obj: src/maca.o src/nvm.o
-tests/tmr-ints.c: src/interrupt-utils.o src/sys-interrupt.o
+tests/tmr-ints.obj: src/interrupt-utils.o src/sys-interrupt.o src/isr.o
+
+NOTHUMB_CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS)         \
+        -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE)           \
+        -I$(TOPDIR)/include                             \
+        -fno-builtin -ffreestanding -nostdinc -isystem  \
+        $(gccincdir) -pipe 
+NOTHUMB_CPPFLAGS_EXTRA = -march=armv4t -mlong-calls -mthumb-interwork -mtune=arm7tdmi-s -DCONFIG_ARM -D__ARM__
+
+
+src/isr.o: src/isr.c
+		$(CC) $(NOTHUMB_CPPFLAGS) $(NOTHUMB_CPPFLAGS_EXTRA) -c -o $@ $<
 
 %.srec:		%.obj
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
@@ -77,7 +88,7 @@ tests/tmr-ints.c: src/interrupt-utils.o src/sys-interrupt.o
 %.dis:		%.obj
 		$(OBJDUMP) -SD $< > $@
 
-%.obj:		$(LDSCRIPT) %.o
+%.obj:		$(LDSCRIPT) %.o src/interrupt-utils.o
 		$(LD) $(LDFLAGS) $(AOBJS) \
 			--start-group $(PLATFORM_LIBS) --end-group \
 			-Map $*.map $^ -o $@

boot.lds

@@ -33,6 +33,7 @@ SECTIONS
 	.text      :
 	{
 	  src/start.o	(.text)
+	  src/isr.o	(.text)
 	  *(.text)
 	}
 

include/sys-interrupt.h

@@ -1,8 +1,7 @@
-#ifndef __SYS_INTERRUPT_H__QIHZ66NP8K__
+#ifndef __SYS_INTERRUPT_H
-#define __SYS_INTERRUPT_H__QIHZ66NP8K__
+#define __SYS_INTERRUPT_H
 
-
+/* Returns true if it handled an active interrupt */
-/* Returns true if it handled an activbe interrupt */
 typedef int (*SystemInterruptFunc)();
 
 typedef struct _SystemInterruptHandler SystemInterruptHandler;
@@ -12,7 +11,6 @@ struct _SystemInterruptHandler
   SystemInterruptFunc handler;
 };
 
-
 void
 sys_interrupt_enable();
 
@@ -28,4 +26,4 @@ sys_interrupt_prepend_handler(SystemInterruptHandler *handler);
 void
 sys_interrupt_remove_handler(SystemInterruptHandler *handler);
 
-#endif /* __SYS_INTERRUPT_H__QIHZ66NP8K__ */
+#endif /* __SYS_INTERRUPT_H */

src/start.S

@@ -197,7 +197,7 @@ not_used:
 
 	.align	5
 irq:
-
+	b isr
 	.align	5
 fiq:
 

tests/blink-blue.c

@@ -5,6 +5,9 @@
 #define DELAY 400000
 
 #include "embedded_types.h"
+#include "isr.h"
+
+no_isrs();
 
 __attribute__ ((section ("startup")))
 void main(void) {

tests/blink-green.c

@@ -5,6 +5,9 @@
 #define DELAY 400000
 
 #include "embedded_types.h"
+#include "isr.h"
+
+no_isrs();
 
 __attribute__ ((section ("startup")))
 void main(void) {

tests/blink-red.c

@@ -5,6 +5,9 @@
 #define DELAY 400000
 
 #include "embedded_types.h"
+#include "isr.h"
+
+no_isrs();
 
 __attribute__ ((section ("startup"))) void main(void) {
 	*(volatile uint32_t *)GPIO_PAD_DIR0 = 0x00000100;

tests/blink-white.c

@@ -5,6 +5,9 @@
 #define DELAY 400000
 
 #include "embedded_types.h"
+#include "isr.h"
+
+no_isrs();
 
 __attribute__ ((section ("startup")))
 void main(void) {

tests/nvm-read.c

@@ -29,6 +29,10 @@ void put_hex32(uint32_t x);
 const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
 		 '8','9','a','b','c','d','e','f'};
 
+#include "isr.h"
+
+no_isrs();
+
 #define NBYTES 1024
 __attribute__ ((section ("startup")))
 void main(void) {

tests/rftest-rx.c

@@ -77,6 +77,9 @@ void toggle_led(void) {
 	}
 }
 
+#include "isr.h"
+no_isrs();
+
 __attribute__ ((section ("startup")))
 void main(void) {
 	uint8_t c;

tests/rftest-tx.c

@@ -112,6 +112,9 @@ void fill_data(void) {
 	}		
 }
 
+#include "isr.h"
+no_isrs();
+
 __attribute__ ((section ("startup")))
 void main(void) {
 	uint8_t c;

tests/romimg.c

@@ -28,6 +28,9 @@ const uint8_t hex[16]={'0','1','2','3','4','5','6','7',
 #define DUMP_LEN  0x00014000
 //#define DUMP_LEN  16
 
+#include "isr.h"
+no_isrs();
+
 __attribute__ ((section ("startup")))
 void main(void) {
 	volatile uint32_t i;

tests/tmr-ints.c

@@ -47,12 +47,40 @@
 #define reg16(x) (*(volatile uint16_t *)(x))
 
 #include "embedded_types.h"
+#include "sys-interrupt.h"
+
+#include "isr.h"
+
+volatile uint8_t led;
+
+#define LED_VAL 0x00000300
+#define led_init() do { reg32(GPIO_PAD_DIR0) = LED_VAL; } while(0);
+#define led_on() do  { led = 1; reg32(GPIO_DATA0) = LED_VAL; } while(0);
+#define led_off() do { led = 0; reg32(GPIO_DATA0) = 0x00000000; } while(0);
+
+void toggle_led(void) {
+	if(0 == led) {
+		led_on();
+		led = 1;
+
+	} else {
+		led_off();
+	}
+}
+
+void tmr_isr(void) {
+
+	toggle_led();
+	reg16(TMR0_SCTRL) = 0;
+	reg16(TMR0_CSCTRL) = 0x0040; /* clear compare flag */
+	
+}
 
 __attribute__ ((section ("startup")))
 void main(void) {
 
 	/* pin direction */
-	reg32(GPIO_PAD_DIR0) = 0x00000400;
+	led_init();
 
 	/* timer setup */
 	/* CTRL */
@@ -67,6 +95,7 @@ void main(void) {
 
 	reg16(TMR_ENBL) = 0;                     /* tmrs reset to enabled */
 	reg16(TMR0_SCTRL) = 0;  
+	reg16(TMR0_CSCTRL) =0x0040;  
 	reg16(TMR0_LOAD) = 0;                    /* reload to zero */
 	reg16(TMR0_COMP_UP) = 18750;             /* trigger a reload at the end */
 	reg16(TMR0_CMPLD1) = 18750;              /* compare 1 triggered reload level, 10HZ maybe? */
@@ -74,19 +103,12 @@ void main(void) {
 	reg16(TMR0_CTRL) = (COUNT_MODE<<13) | (PRIME_SRC<<9) | (SEC_SRC<<7) | (ONCE<<6) | (LEN<<5) | (DIR<<4) | (CO_INIT<<3) | (OUT_MODE);
 	reg16(TMR_ENBL) = 0xf;                   /* enable all the timers --- why not? */
 
+	led_on();
+
+	enable_tmr_irq();
+	enableIRQ();
+
 	while(1) {
-
+		/* sit here and let the interrupts do the work */
-		/* blink on */
-		reg32(GPIO_DATA0) = 0x00000400;
-		
-		while((reg16(TMR0_SCTRL)>>15) == 0) { continue; }
-		reg16(TMR0_SCTRL) = 0; /*clear bit 15, and all the others --- should be ok, but clearly not "the right thing to do" */
-
-		/* blink off */
-		reg32(GPIO_DATA0) = 0x00000000;
-
-		while((reg16(TMR0_SCTRL)>>15) == 0) { continue; }
-		reg16(TMR0_SCTRL) = 0; /*clear bit 15, and all the others --- should be ok, but clearly not "the right thing to do" */
-
 	};
 }

tests/tmr.c

@@ -48,6 +48,9 @@
 
 #include "embedded_types.h"
 
+#include "isr.h"
+no_isrs();
+
 __attribute__ ((section ("startup")))
 void main(void) {
 

tests/uart1-loopback.c

@@ -11,6 +11,9 @@
 
 #include "embedded_types.h"
 
+#include "isr.h"
+no_isrs();
+
 __attribute__ ((section ("startup")))
 void main(void) {
 	/* Restore UART regs. to default */