initial packet error rate test skeleton

This commit is contained in:
Mariano Alvira 2010-03-03 18:48:29 -05:00
parent 46e25b463f
commit 0678e778b1
3 changed files with 86 additions and 2 deletions

View file

@ -32,7 +32,7 @@ CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-fno-builtin -ffreestanding -isystem \ -fno-builtin -ffreestanding -isystem \
$(gccincdir) -pipe $(PLATFORM_CPPFLAGS) $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wcast-align -Wextra -Werror CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wcast-align -Wextra #-Werror
AFLAGS_DEBUG := -Wa,-gstabs AFLAGS_DEBUG := -Wa,-gstabs
AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS) AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)

View file

@ -14,7 +14,9 @@ TARGETS := blink-red blink-green blink-blue blink-white blink-allio \
# these targets are built with space reserved for variables needed by ROM services # these targets are built with space reserved for variables needed by ROM services
# this space is initialized with a rom call to rom_data_init # this space is initialized with a rom call to rom_data_init
TARGETS_WITH_ROM_VARS := nvm-read nvm-write romimg flasher rftest-rx rftest-tx TARGETS_WITH_ROM_VARS := nvm-read nvm-write romimg flasher \
rftest-rx rftest-tx \
per
include $(MC1322X)/Makefile.include include $(MC1322X)/Makefile.include

82
tests/per.c Normal file
View file

@ -0,0 +1,82 @@
#include <mc1322x.h>
#include <board.h>
#include <stdio.h>
#include "tests.h"
#include "config.h"
/* This program communicates with itself and determines the packet */
/* error rate (PER) under a variety of powers and packet sizes */
/* Each test the packets are sent and received as fast as possible */
/* The program first scans on channel 11 and attempts to open a test */
/* session with a node. After opening a session, the nodes begin the */
/* test sequence */
#define DEBUG_MACA 1
typedef struct {
int type;
} packet_t;
enum STATES {
SCANNING,
MAX_STATE
};
enum PACKET_TYPE {
PACKET_PERTEST,
MAX_PACKET_TYPE
};
int get_packet(packet_t *p) { return 0; }
void print_packet(packet_t p) { return; }
void main(void) {
uint32_t state;
packet_t p;
uart_init(INC,MOD);
print_welcome("Packet error test");
/* standard radio initialization */
reset_maca();
radio_init();
vreg_init();
flyback_init();
init_phy();
/* trim the reference osc. to 24MHz */
pack_XTAL_CNTL(CTUNE_4PF, CTUNE, FTUNE, IBIAS);
set_power(0x0f); /* 0dbm */
set_channel(0); /* channel 11 */
/* initial radio command */
/* nop, promiscuous, no cca */
*MACA_CONTROL = (1 << PRM) | (NO_CCA << MODE);
state = SCANNING;
while(1) {
switch(state) {
case SCANNING:
if(get_packet(&p)) {
print_packet(p);
/* if we have a packet */
/* check if it's a pertest beacon */
if(p.type == PACKET_PERTEST) {
/* try to start a session */
}
}
break;
default:
break;
}
}
}